Linksys Rejecting My User Name and/or Password for 192.168.1.1

All of a sudden, my user name and/or password are being rejected when I try to enter the router utility. This is also happening on a second machine that is served by this one. Any solution, ideas?

Oops! I should have mentioned that the router is a BEFW11S4 and the pci card is a WMP11. According to the Linksys website, both have the latest firmware and drivers. These are Wireless B devices that, in the past, have worked fine. Lately, the second computer has been dropping connections like crazy and is driving me---well, crazy.

Similar Messages

  • Adobe Flash Player rejects my user name and /or password

    I have recently changed both my Adobe password and my Apple ID/Password but the Adobe Flash Player installer won't accept these to update my Adobe Flash Player.  I have a Macbook Pro - OS X Version 10.7.5 .  My email address has remained unchanged. Any suggestions?  JL

    Finally went to the Apple shop where a nice young man explained that I had to use the original password not the recently changed password - case sensitive too - and finally have installed the updated Adobe Flash player with no shaking! Maybe this helps you too. JL

  • TS3276 Cannot send mail from my iPad...."user name and or password is incorrect"......mail can be sent from my iPhone

    Why do I get the message   "Cannot send mail, the user name and or password for my email outgoing server is incorrect"?  I use the same account, etc. on my iPhone and haven't any trouble sending mail.

    If your email requires a password for the SMTP server you can set it up in the settings in the General mail setup. Some i.e Gmail require a password for SMTP.
    Otherwise you will probably get better answers in the iPad forum.
    https://discussions.apple.com/community/ipad/using_ipad

  • Where do I enter PPP user name and PPP password?

    Where do I enter PPP User Name and PPP Password when installing a new modem? I followed directions for installation but a dialog box asking for those items didn't come up.
    I reset the Wi-Fi on the System Preference > Network Pane after turning off all my wireless devices, MBP, iPad, iPhone, Canon MG5320 printer/scanner, and HP LaserJet Professional P2606N (this printer is connected via ethernet to AirPort Extreme).
    I did this because of the following message:
    Another device on the network is using your computer’s IP address (192.168.0.1)
    Following directions I unplugged the PK5001Z Modem, plugged it back on, and then turned on each wireless device, one at a time so that unique IP addresses would be created for each one. This worked, but now I'm trying to get our Smart HD Samsung TV to connect to the internet.
    Setting up the IP Internet settings, we are using the Network Name and entering its IP address manually and also having the setup find the IP address automatically. It connected to the modem but couldn't complete the connection to the internet.. Also use a Guest Network, but that didn't work either.
    Is the PPP User Name and PPP Password still necessary? It was given to me by our service provider and was original in 2012.
    Bonnie

    I found the Modem GUI Logo setup on the web for my modem using the address of my IP address with http://xxxxxxxxx.
    Everything looks good.
    The internet connection with the TV is still a problem.

  • My iPad keeps asking me to insert my user name and apple password every 10 mins or so. Anyone know why and what I can do to stop this? Thank you

    Myipad 1 keeps asking me to insert my user name and apple password every 10 mins or so.  How can I prevent this? Thank you.

    I don't know how wide spread this issue is. I've only come across the thread I posted before.
    You can provide feedback to Apple here.
    http://www.apple.com/feedback/ipad.html
    I wouldn't wait for an update from Apple.
    I have several other wireless devices (laptop, iPod touch, blackberry) which have absolutely no problems at all.
    Since it's just the iPad wi fi issue, try restoring as new.
    http://support.apple.com/kb/HT3828
    You may have an app installed that's causing problems with your Wi Fi. After you restore as a new device, sync 5 apps at a time, then test the Wi Fi on the iPad. Keep syncing apps... you might find a culprit.
    Scanning the Internet there seems to be lots of other people having this problem.
    Do you have the links?

  • TS3899 My email account has disappeared from my iphone4. No longer listed. Now won't accept my user name and or password.

    My email account has disappeared from my iphone4. No longer listed. Tried to set up new email account but now won't accept my user name and or password.

    Finally went to the Apple shop where a nice young man explained that I had to use the original password not the recently changed password - case sensitive too - and finally have installed the updated Adobe Flash player with no shaking! Maybe this helps you too. JL

  • I am trying to deauthorize my audible account.  It says the user name and/or password are incorrect after I had just deauthorized the computer using the same user name and password.  They should be different correct?

    I am trying to deauthorize my audible account.  It says the user name and/or password are incorrect after I had just deauthorized the computer using the same user name and password and logging in to post this.  They should be the same password correct?

    Deauthorize Audible Account... always appears as a menu selection, even if you deauthorized Audible or never even had an account.
    Audible is a different account from iTunes and does not require the same username / password.

  • My husband gave me his iPod touch, even after resetting all settings, and even though I have a user name and password whenever I need to update apps it shows his previous user name,  and is asking for his password.  How do I fix that?

    My husband gave me his iPod touch, even after resetting all settings, and even though I have a user name and password, whenever I need to update apps it shows his previous user name,  and is asking for his password.  How do I fix that?

    dom59 wrote:
    Ok, when I go into my Apple ID account, everything looks right.  It does show my user name.  It's only on the iPod that it shows my husband's previous user name, and it asks for his password.  Everything in iTunes and my account looks right.  The issue only seems to be with the actual device, iPod Touch 4th gen.
    There is more than one way to access the Apps Store and the iTunes store.  One is via iTunes on your computer, and the other is via the apps on your iPod.
    Just because you are logged in on your computer does not mean you are logged in on your iPod.
    The reason your husband's user name comes up is because he was the last one to log on.  You can change that by going to Settings>Store.  Tap the Apple ID, Tap Sign Out, Tap Sign In, Tap Use Existing Appel ID, enter your e-mail address and Apple ID password, and tap OK.

  • I use IMAC upstairs connected to the house wifi downstairs where the networked printer is. I have 'found' the network printer on my IMAC settings but when i send to print I am getting a pop-up box which has 'apple' as user name and is asking for password.

    I use IMAC upstairs connected to the house wifi downstairs where the networked printer is. I have 'found' the network printer on my IMAC settings but when i send to print I am getting a pop-up box which has 'apple' as user name and is asking for password. I have tried my own IMAC password but to no avail. The printer also shows a pop-up box stating 'awaiting authentication.
    Any help appreciated

    You are asking several different questions. If you need to store your photos, music, and movies on an external volume, you certainly can. Any externally connected hard disk drive will work, connected either directly to your Mac or to your Time Capsule as a shared volume.
    You should not rely upon using that as a backup device though. Although you certainly may use it for both purposes, it is a better idea to have dedicated backup devices for a variety of reasons not limited to redundancy. You would not want to simultaneously lose all your pictures as well as your backup. If they are all on the same device, that could happen. Furthermore, a backup cannot back up the volume on which it is running.
    As for adding an Extreme or Express, using its LAN port for your iMac, and then enable Internet sharing so you can effectively use the iMac as a "hotspot", you can do that too, but I am unclear on what benefit you believe this arrangement would convey for you.
    An Extreme's Guest network is separate from its Main network; that is the reason for having it.

  • User Name and/or Password not accepted

    I am trying to install something so it is asking for my username and password. No matter what I enter it says it is invalid. I have tried resetting my password and logging out and logging back in with the new password which worked. But still when I get to the install page it asks for my login username and password and then denies it.

    Molly Blank wrote:
    I am trying to install something so it is asking for my username and password. No matter what I enter it says it is invalid. I have tried resetting my password and logging out and logging back in with the new password which worked. But still when I get to the install page it asks for my login username and password and then denies it.
    When you boot Leopard and get to the Login Screen, do you enter the same Login User name and password?

  • I have lost the user name and the password and the phone now stopped the end of updating to IOS7

    the phone now need user name and password at the end of updating the ios system from 6 to iOS7
    what is the solution now and the phone now like a piece of iron

    Have you tried adding your comcast account using the built in IOS mail app.
    If you're using the Comcast Xfinity app, then look at their support site or ask the app developer.

  • Old User Name and Fortgotten Password

    I have a collection of songs on my iPod, that I cannot transfer to my current User account as it is set up for an old User Name (email address) that does not exist anymore. I have also lost the password, so when it asks to transfer I cannot log in.
    Can anyone suggest how I can reset the iPod user name and password detail to transfer all my songs to my new account?

    Wrong forum...
    But to help you the default is USERNAME is left blank and PASSWORD is admin
    And if that doesnt work using a toothpick or pen tip, press and hold the reset button on the back of the roter for 30 seconds to reset everything back to default.
    Message Edited by wehowardjr on 11-26-200611:00 AM

  • Password for 192.168.1.1

    I find I don't always need to get into the home set up page,and it seems I had a password at one time.I don't remember having a password. Maybe it's soemthing window's vista made. Anyway. I need to help my son set up his x-box 360 elite, but I can't get into the access page at: 192.168.1.1 How do I do it, without knowing my password and user name?
    --Rhonda

    The password is for Linksys Router login ..... try using the password you used while installing the router for the first time ....
    if not then use admin as a password .... if that also not works then you have to reset the router ... after reset admin password will work ...

  • I try to download  Adobe digital Edition on my PC but it doesn't reconize my user name and my password, it's says ERROr and i can't use de CurrentPC User beacause i need some rigts ...

    it's says ERROr and i can't use de CurrentPC User beacause i need some rigts ...

    If the old ID ("username") is an earlier version of your current ID, temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • Disappearing User Name and/or Password

    This issue started in 10.5.2 and continues in 10.5.3 after using the combo updater. Many times when i wake my computer or cold/hot boot it, i type my user name in and then try to type in the password in to the password area and WHILE i am typing in the password the user name disappears! I cannot even figure out where to begin to solve this. I tried using Onyx to delete the caches and delete the DS store files but it didn't help. Any suggestions on where to start?

    Wrong forum...
    But to help you the default is USERNAME is left blank and PASSWORD is admin
    And if that doesnt work using a toothpick or pen tip, press and hold the reset button on the back of the roter for 30 seconds to reset everything back to default.
    Message Edited by wehowardjr on 11-26-200611:00 AM

Maybe you are looking for

  • Run in the same time with watching the result?

    I have a question how can I get 2 or more VI's in the same program run simultaneously, each has several SubVI, and if I press a button then I get the result of a VI and without stopping at the same time on another button and I get the result from oth

  • FLVPlayback error clearing

    I am having some difficulty getting some code right and is causing my flvplayback mc to load undefined into it's content path. This is my problem, but as a cause of this, I'm noticing that the whole thing dies when it can't load a movie in, and furth

  • Filtering  Unique values in the Hash table

    Hi Friends, Could you please tell me I want to Filtering the values in the Hash table.The Values are our own objects. E.G class Emp private String EmpID=null; public void setEmpId(String Id) EmpId=id; public void getEmpId() return this.EmpId; public

  • My iphone 5 *****. Always losses signal. No service. Omg so frustrating. Called AT

    My iphone 5 *****. Always losses signal. No service. Omg so frustrating. Called AT&T bunch of times and still nothing. If this doesn't get resolved vary soon I'm switching to galaxy s4. Any pointers?

  • MOVE SERVER  ECC 6.0 REQUEST IN TO THE  4.7 SERVER

    HI i have move ECC 6.0 request in to the 4.7 ides server. so wat step i follow up