LInksys Router BEFW11S4 version 2 and MacBook Pro Snow Leapord

I bought my Linksys Router Model # BEFW11SW version 2 in 2002. I bought my MacBook Pro Dec.'09. My airport works in public location with wireless networks, but not in my house. Is my router not compatible, or can I re-configure something to make it work? Thanks!

It's an old router. You may not have the latest firmware installed. The speed is 11b. At this point routers are cheap enough get a new one for your new MBP.

Similar Messages

HP Photosmart C5580 and MacBook Pro Snow Leopard wireless printer with router

I have a macbook pro OSX operating system and a C5580 HP Photosmart printer. I have spent hours with netgear as I did purchase a new router getting my macbook pro to print wirelessly. Whatever the fix it is temporary and my private tech has to take control of my computer to get to work again.
1. am I printing with bluetooth? through router?
2. what is happening whenever it gets out of sync and how can I fix myself?
3. computer says "idle" but shows device connected. I can print test page wirelessly, but not current document. Documents print when I connect with usb cable.
I felt I should contact HP since I think it is their problem though netgear has been very helpful. I understand that I do need USB to scan, but shouldn't have to have it to print. We have downloaded all of the most current drivers and software.

Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
If you loaded the HP software from the printer CD and unless your CD says it specifically supports 10.6 Snow Leopard, you must uninstall the software using the 'scrubber' option:
Go to Applications/Hewlett Packard/ click on HP Uninstaller
Click on Continue
Highlight your device on the left pane
Hold the Ctrl, Opt and Cmd keys and click on Uninstall
There will be a pop up that asks if you are sure you want to uninstall ALL hp software. (At this point, if you continue, any HP printers you have installed will need to be reinstalled)
Click Continue and let it finish
Restart your Mac
Now, run a Software Update.
Next, remove and re-install the printer in System Preferences, Print & Fax.
You do not need the software now since Snow Leopard has both print & scan drivers built-in. Scan from Preview or Image Capture apps. Scanning from the front panel of the printer does not yet work.
Answers:
1. No, routers don't do bluetooth. If they are wireless routers they use wi-fi (802.11).
2. I don't know, you have not told me enough about your symptoms or system.
3. Same as #2.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Macbook and Macbook Pros crashing in certain wifi areas?

Hi all,
I have friends who's Macbooks and Macbook Pros (Snow Leopard 10.6.x) crash as soon as they enter into certain wifi hot spots. They attend the University of Lethbridge. They always crash when their airport cards connect to the guest wifi connection at the school. I thought it was just lack of maintenance but it's not. I was looking at MBP's that came right out of the box. This is common to all macbooks from about 2009 and up. I have yet to try out the MBP's with thunderbolt but so far many of them are giving the grey screen of death.
Some people also get random signal dropouts when they are in residence.
I'm on a macbook 2006 10.5.8 and have never had any problems.
Any suggestions on how I can help them out?

Upgrade to 10.6.7. Most likely they are running afoul of a bug where the Mac can KP if certain MCS rates are turned off.

I have one PC with a modem and linksys router #BEFW11S4 i...

I have one PC with a modem and linksys router #BEFW11S4 installed. I have 3 other PC's which connect to it via Linksys wireless-G adapters. Things have been working just fine until recently when now at least twice a day my Pc's with the adapters lose connection with the router. Any suggestions?

Open routers set up page ..... click status & see the firmware version ...... if required update ....download the latest firmware from http://www.linksys.com/download ........

Rosetta and Macbook Pro on Snow Leopard

HI I have two computers
macbook on leopard with all discs
macbook pro snow leopard, discs lost in house move
I am moving from macbook to macbook pro and have transfered the likes of adobe photoshop cs which worked fine in macbook on leopard
I can't open it in macbook pro snow leopard it keeps asking for rosetta but not going to install mode option
It seems to think i am not conneced to internet which i am
Can anyone help?
A can I install rosetta from leopard back up dics on snow leopard?
b Why can't I access download?

http://docs.info.apple.com/article.html?path=Mac/10.6/en/27987.html
If the dialogue box isn't giving you the download option, first try another PPC based application ( you can find any that are by using System Profiler;
 > About this Mac > More Info > software tab > Applications; read the 'kind' column to find other PPC apps.
Try opening one of those and see if the dialogue box has the option.
If that fails, you need your original SL DVDs to get it from the optional installs.
Your SL Mac won't boot from Leopard and you can't install anything from it directly, but there may be a way round it. Install Pacifist and use that to find and restore the Rosetta package from the Leopard disc (it's a default install on Leopard, so may take a bit of finding).
I can't guarantee it will work - there could be differences between the Leopard and SL versions that I'm unaware of, so make sure you're backed up.

New MacBook Airs and MacBook Pros supporting Snow Leopard?

Do the new MacBook Airs and MacBook Pros support the Snow Leopard OS? I have been trying to install 10.6 but the screen is blacking out after install for the Air and I cannot even boot into an external drive for the Pro. Any suggestions or help?

Kada,
A Mac's Firmware is designed to reject the installation of a Mac operating system that predates the version and build the unit originally shipped with. There is a good reason for it, as earlier versions would unlikely be in anyway compatible with the hardware. An OS that predates the hardware would not have the requisite drivers for the built-in peripherals, such as the graphics subsystem and ports. The safetey measure prevents Apple from having to deal with the potential nightmare of users having problems they are not prepared to alleviate.
You may be able to physically create a working situation by running an earlier build using a VM layer, such as using Parallels or Fusion, but Snow Leopard's single user licensing doesn't lawfully permit it. Snow Leopard's Server edition does however. Then again, it still wouldn't solve your scenario, as you would be running Lion or Mountain Lion to support the VM.

Time capsule only allows 2 devices at a time as a router. If I am using the iphone and macbook pro, it bumps the roku offline. Any suggestions?

time capsule only allows 2 devices at a time as a router. If I am using the iphone and macbook pro, it bumps the roku offline. Any suggestions?

At a guess you have cable internet connection.. please confirm exactly what you have.. two public IPs are allowed by some ISP.. once you use up the two IPs, there are no more..
Make sure the TC is in router mode. And to get it working you probably need to shut off the cable modem.. if it has battery backup remove the battery.. try 5min off .. if not long enough try 20min off. then overnight. The ISP equipment must reset to allow a new MAC address to capture the IP.
If you cannot work it out.. plug in the old router again.. and set the TC to bridge mode.. which I suspect it is in now.. and plug it into the main router.. it should work fine like that.

For the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

for the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

Then you might check at any of the other university book stores or software stores or any computer store in town for the 64-bit version.
If you want to use the 32-bit version from the school (you probably get it for free or very cheap) then you could purchase Parallels and run it as a virtual machine concurrently with OS X. There are some caveats:
1. You have to purchase Parallels (there may be an academic discount.) List is $79.95.
2. Your computer needs minimally 4 GBs of RAM, but realistically 8 GBs would be better.
3. Parallels creates a pseudo-drive on your hard drive. It could easily require 50 GBs of disk space.
Accommodating these might be more costly than buying 64-bit Windows 7. And, if you look online you may find them with an academic discount (or may be able to order it through the school.)

Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

Hi, i forgot my macbook pro(snow leopard) password and i tried to reset it through single user mode, but whenever i type, everything comes out in CAPs instead of lower case. Each time i press the minus(-), it always comes out as an underscore(_).Pls help.

Well, you can try easing the shift key up with something thin but flexible (credit card sort of thing) but if the contacts below are stuck you may need to get it seen to by an authorised repairer.
If you can borrow a keyboard (a PC one will probably work as long as the password is alpha-numeric with no special characters) you can at least get in to backup your HD before going for repair.

Printer says "sending data..." and doesn't print (photosmart c440 & macbook pro snow leopard)

Hi, my photosmart C440 printer suddenly stopped working and wont print. The message says "Sending data..." forever but never prints. The printer is on but doesn't respond to what my computer says. I have a macbook pro snow leopard OS. This has never happened before, I didn't make any changes to the system. When the problem first appeared, I reinstalled the driver and was able to print once, then it stopped working. Then I installed snow leopard and it stil doesn't work.
Thank you!
This question was solved.
View Solution.

Let's reset the printing system:
- Sys Prefs, Print & Fax
- Right (control) click in the rectangle listing your printers and select Reset Printing System.
WARNING - this will delete ALL of your printers!
- Select the plus sign to re-add it. Look for the printer, select it and wait until the "Add" button becomes available. Click it.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have OSX 10.6.6 MacBook Pro (Snow Leopard) and i am trying to format my whole hard drive (back to factory settings) from the original CD. Can someone please give instructions?

I have an OS X 10.6.6 MacBook Pro (Snow Leopard) and i am trying to format my whole hard drive (back to factory settings) from the original CD.
Can someone please give instructions?

Welcome to the Apple Support Communities
To restore the MacBook Pro to factory settings:
1. Make a backup of your files because everything will be erased.
2. Insert the Snow Leopard disc and press the C key while your Mac is starting to start from the DVD.
3. Go to Utilities menu > Disk Utility, select Macintosh HD on the sidebar, go to Erase tab and erase the disk.
4. Close Disk Utility and install Mac OS X

Connecting iMac and MacBook Pro using a non-Apple wireless router

I use a Belkin wireless router. Is there any way for me to connect iMac and MacBook Pro using the router to share files? I think I read somewhere that I need AirPort Extreme for this, but I'm not sure. Thank you.

Great resource from Dennis...file sharing, I.e. networking, is a function of the operating system settings and not the brand of router. Using Mac OS X 10.6 on both machines makes it really seamless. Following Dennis's kb article should make the two almost act like one machine.

Airport, 10.5.8, and MacBook and MacBook Pros and slow internet

Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
If you have Macbook or MacBook Pro, and have upgraded to 10.5.8, you may experience slower than normal airport connection due to a bug found in the original 10.5.8 installer. Apple has released this update for MacBooks and MacBook Pros to address the issue:
http://support.apple.com/downloads/AirPortClient_Update_for_MacBook_and_MacBookPro
To amend what Apple has stated, the System Profiler will indicate you have one of these three MacBook/Pro CPUs:
o MacBook3,1
o MacBook4,1
o MacBookPro4,1
If you have certain third party routers the update above will not help. In which case, it is recommended that you contact the third party router manufacturer for a firmware update, and find out also if others have your exact same router, and have found a resolution with your issue.
Wireless issues can be caused by the following:
1. Interference on the same wireless channel.
2. Single channel connection from some third party routers not being strong enough to deal with interference. Apple Airport Express, Extreme, and Time capsule wireless routers all support dual channel connections, and also support networking with Windows as well as Mac.
3. Bad router tables in your router.
4. Power surges.
5. Interference from microwaves, or 2.4 Ghz non-cell wireless phones, whose signal is not tempered with channel hopping.
6. Distances less than 2 feet may have many overlapping wireless waves causing interference from the wireless router.
7. Distances greater than 150 feet from the wireless router.
8. Walls with numerous pipes, improper ground wiring, file cabinets with numerous papers between the computer and the router.
9. Run the hardware test that came with your computer, it may indicate an issue on the logicboard which could also impact your wireless card.
10. Improper security on your wireless connection. Setting up a WPA2 connection is preferred over WEP, which is preferred over no password.
11. 802.11n is a draft standard, meaning not all routers support it the same way.
12. Data corruption in the wireless cache settings, caused by improper system maintenance:
http://discussions.apple.com/thread.jspa?threadID=1772235
13. Migrating wireless settings with the Migration Assistant from a PowerPC to Intel Mac, or vice versa. It is better to follow these tips to avoid those problems:
http://discussions.apple.com/thread.jspa?threadID=435350&tstart=0
Not everyone will get this problem.
14. Apple Airport and Time Capsule firmware updates can be found on:
http://www.apple.com/downloads/macosx/apple/firmware_hardware/
This is the 1st version of this tip. It was submitted on August 14, 2009 by a brody.
Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

"this tip ready for consideration"
Please put in:
http://discussions.apple.com/category.jspa?categoryID=140
http://discussions.apple.com/forum.jspa?forumID=1222
http://discussions.apple.com/category.jspa?categoryID=218
http://discussions.apple.com/category.jspa?categoryID=190
and any other forum or category you feel is appropriate.

MacBook Pro Snow Leopard Networking Issues

Has Apple acknowledged the dropped network connection issue with Snow Leopard and Macbook Pro? I've seen many posts and read several blogs with suggestions for fixing the issue, but all the fixes are temporary. The problem still persists.
It happens on wired and wireless network with Safari and Firefox. I've installed all updates and tried all the posted fixes.

Change your router channel. Sometimes this all you will have to do.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
How to diagnose and resolve Wi-Fi slow-downs

Macbook Pro Snow Leopard; WiFi keeps dropping, no IP Address

Macbook Pro Snow Leopard; WiFi keeps dropping. Issue is Macbook is not getting an IP address from the wireless routers DHCP Server. Tried all options in the forums. Reboot, changing security, PRAM reset .. nothing. Problem keeps happening. No issues on XP laptops and Nokia phones.
Even the iPhone, iPod and iPad seems to be fine. It is just the dang gam it Macbook pro and it is driving me crazy.
All fixes tried, changing wireless mode, security, PRAM ... only thing left is to rebuild the mac which i was hoping I can avoid somehow.
Any ideas to fix this would be great!
RK

Change your router channel. Sometimes this all you will have to do.
System Preferences/Internet & Network/Network
Unlock the padlock
Locations: Automatic
Highlight Airport
Click the Assist Me button
In the popup window click the Diagnostic button.
System Preferences/Network- Unlock padlock. Highlight Airport. Network Name-select your name. Click on the Advanced button. Airport/Preferred Networks-delete all that is not your network.
Place a check mark next to "Remember networks this computer has joined." Click the OK button and lock the padlock. Restart your computer.
http://support.apple.com/kb/TS1920 Mac OS: How to release and renew a DHCP lease
No internet connection (wireless)
Check to see if an extra entry is present in the DNS Tab for your wireless connection (System Preferences/Network/Airport/Advanced/DNS).
Delete all extra entries that you find.
Place a check mark next to "Remember networks this computer has joined."
How to diagnose and resolve Wi-Fi slow-downs

LInksys Router BEFW11S4 version 2 and MacBook Pro Snow Leapord

Similar Messages

Maybe you are looking for