Linksys router with wep enabled

Hi,
Im trying to use WIFI on my touch with my network secured. I have entered the password and it is accepted however the touch says it cant find the server. When I de-activate the WEP security on my router everything works as advertised. I have no idea what to put in the following items in set up
HTTP Proxy
Server
Port (Http should be 80)
Auth
i have tried entering manual username and password as i would for earthlink and this didnt help. When in un-secured mode it didnt ask and everything worked. Help

Make sure that you type in the code, rather than your username. You should be able to find it on your Linksys router under a tab that says wireless security. Type in, in your internet browser's address bar: 192.168.1.1. That should bring up the interface for you router.
For WEP, you should have 128 bit encryption, which means that your passphrase should be 13 letters long. If you have to change this, the other devices in your network will have to be changed to reflect the new passphrase. You should also power off your router when you introduce a new device into your network.
Have you thought about using WPA or WPA2? Usually this works better than WEP which is not as secure.
Power off your iTouch by pressing the button at the top. Turn it on again and see if you can get access to your network.

Similar Messages

  • How apply cgi on Linksys router with safari

    I'm having issues of setting preferences on a Linksys router with Safari and a Mac. Am I missing a setting on Safari to allow cgi?

    I want to set how many users allowed on my small local network. I can use a different browser to accomplish this but would like to use Safari. From time to time I do maintenance on the router and need to access the router preferences. Also at this time trying to trouble shoot the router for not allowing PC's to show up on the network FInder, a completely different problem and off topic.

  • MIB walk for a router with MPLS enabled interfaces

    To perform some testing in an agent I am building, I need a MIB walk for a router with MPLS enabled interfaces. I would greatly appreciate help with this MIB walk

    You can do a walk-through of the MIB by running a command such as getmany -v2c public mplsLsrMIB . For detailed instructions refer http://cisco.com/en/US/docs/ios/12_2t/12_2t2/feature/guide/lsrmibt.html.

  • Can't connect to Netgear router with WPA enabled (MBP)

    I just received a Macbook pro today, everything is wonderful except wireless networking. When it first started up, it detected my wireless network, showed me the SSID, and asked for a password. I entered the password, and it failed to connect. I decided to try later and did the rest of the install.
    I connected via cabled ethernet and downloaded all of the updates. For a machine that shipped from the Apple store (custom config) a few days ago, I was surprised at having 13 LARGE updates to download. Grabbed them all, including a Firmware update which required two reboots. One for everything else, and another for the firmware.
    I tried again from sysprefs, and asked for the diagnostics. It asks me for my WEP key, and there is no option for WPA. I tried entered the WPA key anyway, despite only three WEP options showing up, and it still fails.
    Going through the Airport 'tab' and editing the connection, I get an option for WPA Personal, Enterprise, WPA 2 Personal, and WPA2 Enterprise as well.
    I tried using WPA Personal and WPA 2 Personal and entering the key which works on other notebooks, still no joy.

    Which Netgear router do you have? I use the Netgear
    RangeMax WPN824 and works well with WPA enabled but I
    think it may have failed to work the first time.
    WGT624 v2. Works fine with other wireless devices from a number of vendors, and is detected by the Mac, but I can't connect. I don't want to disable WPA if I can help it, I have a number of other systems configured for it as is, plus guests that come to visit.
    but some how I had to delete the connection,
    let airport find it again and re-enter the password
    to get it to work. One of those things I kind of did
    in the process of troubleshooting and can't remember
    exactly how it was I did it
    I'll try that and see if it helps. Thanks for following up.
    UPDATE: Sure enough, I deleted the network and added it back in by manually specifying the SSID and password, and it works now. No idea why, but there it is... thank you very much.

  • Windows XP client can't connect to AirPort Extreme AP with WEP enabled.

    Hello,
    I have big problem with Mac Mini AirPort Extreme working in AP mode with Windows XP client.
    Some time ago, AP refuse to connect Windows XP clients (notebook) when WEP is enabled (40/128 bit, same problem), while before that, everything work perfect.
    On other hand, iPhone can connect using WEP without an problem.
    When WEP is turned off, XP client can connect but this is not acceptable for me.
    I must notice that friend of mine have absolute SAME PROBLEM which rise almost at same time few months ago. They have Mac Mini and XP notebook (different then mine) which can not connect with WEP turned on, while his iPod touch work!
    I guess that this happened due AirPort Firmware upgrade included in some of Apple software update.
    Does anybody have similar problem or know the solution?
    My AirPort Card Information:
    Wireless Card Type: AirPort Extreme (0x168C, 0x86)
    Wireless Card Locale: Worldwide
    Wireless Card Firmware Version: 1.4.16.2
    Current Wireless Network: Mac mini
    Wireless Channel: 11
    Tnx in advance.

    mikikg, Welcome to the discussion area!
    Sorry but this is a known issue.
    The only solution is to get a real wireless router instead of using your Mac mini as a base station.

  • No able to connect to router with WEP key

    I want to connect to a router with a 10 digit hex WEP key. Entering this key into Airport, I says that the password is invalid. Using a XP system, I use the same key with a shared autentication option. How can I wireless connect to this router. I know the SSID name. I tried also to start with a $ sign, but no success.

    Put a $ sign in front of the password. So if your password is bnghtybngh type in $bnghtybngh.

  • Using Linksys router with Time Capsule / Airtunes...

    Hi,
    Does anyone have any idea how I can use my old Linksys WRT54G wireless router with my Time Capsule in such a way that the WRT54G provides a b/g network and I can have my Time Capsule provide just 802.11n for the best possible speed?
    I have the two connected via Ethernet (TC connected directly to my cable modem) but don't seem to be able to get things to work.
    I know I must be on the edge of getting this to work but am obviously missing the final step...
    Cheers in advance for any help you can give,
    Adi :o)

    go to this link:
    http://discussions.apple.com/thread.jspa?messageID=6831703#6831703
    than the link at the bottom of the page.
    i just set this up this weekend - everything works perfectly.

  • Linksys router with only a wireless laptop?

    Hi,
    I'm going over to my folks tonight to set up their Linksys wireless router.  They have DSL service and just a wireless enabled laptop.  I understand the router will need to be connected to the laptop for initial setup. Once that setup is complete, will they then be able to disconnect the cable from the router to the laptop and use the laptop throughout their home?  They do not have a desktop pc to permanently plug the router into.  Will this be a problem?
    Thanks for your help,
    Jason

    You should use a wired connection to configure the router initially simply because otherwise you may have difficulties connecting to the correct router wireless in the beginning if other people in the proximity run another Linksys router in default configuration. Thus it is highly recommended to use a wired connection although it is possible to configure the whole router without ever connecting a wired computer to it.
    I think you must use a wired connection if want to use the setup program on the CD. But it is not mandatory to run the setup CD. Sometimes the program will not even be able to successfully configure the router.
    You can always configure the whole router through the web configuration interface at http://192.168.1.1/ Again, for the initial configuration use a wired connection to configure the wireless network and to secure it.
    Regardless how you do the initial setup, after the router works you don't need a desktop connected. You don't even need a computer if you just connect a wireless device like a WLAN VOIP phone or a Tivo or similar.

  • Linksys router with cisco switch

    Hello everyone,
    Just wondering if i can connect a cisco switch to my linksys router. Any info will be helpful. Thanks.

    Well, you should be more specific what info you need.
    Your question is answered with: yes, you connect a cisco switch to a linksys router. You can connect pretty much any ethernet switch or hub to a linksys router.
    Beyond that I don't know what you want to know and thus cannot really give you more info.

  • Linksys router with 2 different air port cards

    I have a Pismo and a G3 iBook 500. Both have air port cards in them. The pismo is running 10.4 and the iBook is running 10.3. Neither of them are able to pick up my Linksys router. I have a Pc laptop, G4 eMac and a BW G3 tower that can all pick up the router just fine. The eMac and G3 are both running a USB network adapter. Any suggestions?
    Also does the original base station need a card in it? I found an auction that says the card has been removed from the base.

    Is your Linksys operating in an 802.11b compatible mode?
    Also does the original base station need a card in it?
    Yes

  • Not able to connect my Iphone to my WRT54GS router with security enabled

    As the subject line states, I'm not able to connect my Iphone to my WRT54GS router when the security is enabled. When ever I attempt to connect to my network with my phone it always tells me the password is incorrect. I have double checked the password in the easylink advisor and it matches up. I have also tried both WPA and WEP with the same result, I know that the wireless is working on the router as I turned the security off and was able to connect to it. I updated the firmware this evening also with no changes. If anyone could help me with this issue it would be much appreciated.

    First of all, in the router, give your network a unique SSID. Do not use "linksys". If you are using "linksys" you may be trying to connect to your neighbor's router. Also, in the router, set "SSID Broadcast" to "enabled". This will help your iPhone find and lock on to your router's signal.
    To connect using WEP, enter WEP "key 1"  (found in the router)  into the iPhone, not the WEP password or passphrase.
    To connect using WPA, make sure that there is not an encryption nomenclature problem.  For example, WPA is not the same as WPA with AES.  Please note the following:
    WPA    =   PSK    =   WPA with TKIP  =  WPA   personal
    WPA2  =   PSK2  =   WPA with AES   =  WPA2 personal
    I am not certain, but your iPhone probably does just ordinary WPA  (not WPA with AES).  Assuming that this is correct, then the router should be set to:
    "WPA personal"  with  "TKIP"
    Also, in the iPhone, be sure to delete the entry for your unsecured connection to your router, before you try to input info regarding the secured connection to the router.
    Hope this helps.
    Message Edited by toomanydonuts on 07-16-2008 03:12 AM

  • Error message when connect to wireless router with wifi enabled phone

    Wireless router model WRT54G Ver.2
    i would like to seek help on this.
    I have been using a wirreless router to access the internet with my computer and it has been working fine. recently i got a handphone with wifi capability (nokia 5800). I managed to connect the phone to connect to the wireless router (it says so in the phone status). but when i tried to open the browser in the phone i got an error message "No Gateway Reply".
    Can anyone help me to troubleshoot?
    I enable WEP for security.
    another thing is, i tried to use the phone to connect to another wireless router at the cafe, it worked well.
    thanks

    When you connect your handphone to your wireless network, whats the IP address you are getting it on your handphone, if required you can provide a static ip on your handphone i.e IP : 192.168.1.10, Subnet : 255.255.255.0, Default Gateway : 192.168.1.1, DNS1: 4.2.2.2, DNS2 : 4.2.2.1 and after this you can restart your handphone and try to check if you are able to go online or not.

  • Can't connect to network with wep enabled

    I'm having problems connecting my mbp to my wireless network. It connects fine with no security enabled but when security is enabled I type in the wep key and I get a message saying there was an error conecting.
    I have read loads of other posts and it seems a lot of people have managed to sort this problem by putting a '$' in front of the wep key when trying to connect. This is not working for me.
    Is anyone in the same boat?
    Does anyone know how to get around this?

    See if any of this helps:
    http://docs.info.apple.com/article.html?artnum=300153
    http://docs.info.apple.com/article.html?artnum=304197
    http://docs.info.apple.com/article.html?artnum=106424
    http://docs.info.apple.com/article.html?artnum=106250
    http://www.apple.com/support/airport/
    Be sure you have the latest Airport software installed on your computer. Depending upon the particular router you are using you may need a firmware update for the router (if it's third-party or an older Apple Base Station that may need a firmware update.)

  • My Ipod Touch won't connect to belkin 54g router with wep password 128 bit

    Well basically, I try to connect to my router it is belkin 54g, I have a 128 bit password WEP security. When I put the password in correctly, it says that it's " Unable to connect ".
    However, when I only put in the first 10 hex of my password it says connected, but when I go on facebook or safari it says " No Internet Connection".
    Before you refer me to any solutions these are some of the things that I have tried but didn't work:
    Putting a $ sign in front of the password
    Restarting my router
    Turning off security and then put back on ( When i turned it off it connected but when I turned it back on it wudnt connect)
    Changing it to WPA (still doesnt work)
    I have noticed that on my router, it keeps blocking me from connecting to it. All of the comptuers can connect to my router as normal however, my ipod touch can't.
    It's really annoying because you can't even do half of the things without being able to connect to internet.
    Please help me

    are other things still connecting to the wifi without a problem?
    Have you tried resetting network settings, then unplugging modem and router from power for 40 seconds then plugging back in letting the lights stabilize and Then recconecting with the ipod>?

  • Why do I need to reconnect after sleep with WEP enabled?

    I have a MacBook and an old iMac. I enabled WEP and closed network on my Snow Airport but now every time the iMac goes to sleep and wakes up, I have to reenter the WEP key to connect to the Airport. This does not seem to be a problem on the MacBook. I put the iMac in my 5 year old son's room so he is too little to reenter the password everytime, that means I have to do it. That just doesn't seem right. Shouldn't the password remain active and logged in to the Airport even through sleep? Is there another setting I have to change? For now, I just disabled WEP but I am concerned about the lack of security. Thanks for any help or advice.
    Oh, I configured the AirPort on the iMac because I could not get the AirPort Admin Utility to work on my MacBook. I just read a previous post and found the solution to that but have not tried configuring the Airport from the MacBook to see if that makes a difference. Need to go to work now. Thanks for any advice
    Thom

    Try the following on the iMac, if you use Preferred Networks:
    1. Delete Preferred Network(s)
    o System Preferences > Network > AirPort > Configure
    o In the "By default, join:" pull-down menu, select "Preferred networks"
    o Delete the network(s) you regularly use from the list
    2. Delete AirPort Keychain Entries
    o Launch the "Keychain Access" application located in Applications/Utilties.
    o Click on the "Kind" filter at the top, and look for any "AirPort network password" entries...and delete them.
    o Restart, or log out then back in.
    3. Add Preferred Network(s)
    o System Preferences > Network > AirPort > Configure
    o In the "By default, join:" pull-down menu, select "Preferred networks"
    o Add the preferred network(s) using the "+" button.
    o Restart or log out then back in.

Maybe you are looking for

  • Inconsistent positioning of MovieClips

    I need a grid of display objects (50x50 pixel squares) that I use an AS3 script to create as a two-dimensional array. I have already confirmed with the AS3 forum that the code works when the objects displayed are not MovieClips. However, the position

  • How to use DELETE_COLUMN Method?

    Hi Experts, I have a ALV Tree by using CL_GUI_COLUMN_TREE, from there if I want to delete some selected columns from tree output then How I should do that. I was trying Delete_column Method, but I dont know exasctly how to use it. Can anybody help me

  • Cant submit job in 10g.

    When I try to submit an import job, I get the message: Import Submit Failed Errors: ORA-31626: job does not exist ORA-31637: cannot create job IMPORT000021 for user SYSTEM ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95 ORA-06512: at "SYS.KUPV$FT_INT", l

  • Adobe Reader error in firefox response

    Hello I am submitting my PDF data to oracle database through java servlet. On submitting, i am writing confirmation in response object. response.setContentType("text/html" utf-8) Using IE, I do not have any problems printing response object after suc

  • Setting color in Keynote

    I want to set a specific color in Keynot. In this case #F2F2F2 Is there any way to do this? Cheers s