Linksys Router - XBOX - HELP

So I can access the internet on my laptop no problem. I have tried resetting my router and every possible thing I could think of. I cannot access my routers ip webpage to change settings. I basically don't know anything. Also, in ipconfig it says media connected. My ultimate goal is to have the xbox live work. It cannot even recognize the wireless network I am on. Here's my ipconfig /all THANKS for any help. I'm pretty sure this is a mess
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Owner>ipconfig/all
Windows IP Configuration
   Host Name . . . . . . . . . . . . : Owner-PC
   Primary Dns Suffix . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Dell Wireless 1510 Wireless-N WLAN Mini-C
ard
   Physical Address. . . . . . . . . : 00-24-2C-71-3D-22
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::e45e:c16b:136c:f289%11(Preferred)
   IPv4 Address. . . . . . . . . . . : 207.108.205.226(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Tuesday, November 16, 2010 2:16:40 PM
   Lease Expires . . . . . . . . . . : Wednesday, November 17, 2010 2:16:40 PM
   Default Gateway . . . . . . . . . : 207.108.205.1
   DHCP Server . . . . . . . . . . . : 207.108.205.1
   DHCPv6 IAID . . . . . . . . . . . : 201335852
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-11-D2-6A-40-00-22-19-F5-43-45
   DNS Servers . . . . . . . . . . . : 1.1.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : NVIDIA nForce 10/100/1000 Mbps Ethernet
   Physical Address. . . . . . . . . : 00-22-19-F5-43-45
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 6:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : isatap.{467E171E-AB98-4CD1-80CC-BC263D14E
AC3}
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 7:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Tun Miniport Adapter
   Physical Address. . . . . . . . . : 02-00-54-55-4E-01
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:4137:9e76:817:39fa:3093:321d(Prefe
rred)
   Link-local IPv6 Address . . . . . : fe80::817:39fa:3093:321d%15(Preferred)
   Default Gateway . . . . . . . . . :
   NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter Local Area Connection* 12:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : 6TO4 Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 13:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft 6to4 Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2002:cf6c:cde2::cf6c:cde2(Preferred)
   IPv6 Address. . . . . . . . . . . : 2002:cf6c:ce2a::cf6c:ce2a(Preferred)
   Default Gateway . . . . . . . . . : 2002:c058:6301::c058:6301
   DNS Servers . . . . . . . . . . . : 1.1.1.1
   NetBIOS over Tcpip. . . . . . . . : Disabled
C:\Users\Owner>

How you have connected your Modem and Router? Make sure the Modem is connected to your Linksys Router on the Internet Port.
The IP address which you are getting it on your Wireless Network Connection is an invalid IP address, i feel you must be getting that ip address directly from your Modem.
Connect the Modem to Router on Internet Port, then connect your computer to the linksys router on the LAN Port 1. Then on your computer do ipconfig and check whats the IP address on your Local Area Connection, It should be in this range 192.168.1.xxx.Once you get this IP address you can login to the setup page of your Router and make the necessary changes.

Similar Messages

JUST BOUGHT WRT54G LINKSYS ROUTER, NEED HELP WITH SET UP PLEASE!

I've tried everything to get my WRT54G to work but no matter what I do I can't get past step ten on the CD. It asks for my password and when i type and confirm type it then press next it comes up with, Router Configuration Error. Would you like to try again?
I've been stuck at this for over two hours now, please help me
Madi-Liu

I had the same problem this past weekend. The CD is the problem. It is much easier to go to www.linksys.com/connect and first update the firmware (if applicable), and then use the EasyLink Connect tool. I works very well.
Good luck,
Mike

Airport Extreme connected to a linksys router - need help finding PCs on ls

Hello, I just set up an iMac connected to an airport extreme that connects to the internet through an existing linksys that is connected to my cable modem. I also want to share files with two PCs on that are connected to the linksys and share the printer that is on my airport extreme with all three machines. Can someone point me in the right direction?

Hello and Welcome to Apple Discussions.
You'll need to enable +Wireless Bridging+ on the router and open the relevant ports in the Firewall for printing and file sharing (see the Linksys Manual).
As to sharing files and sharing printers after you've configured the router then take a look at iFelix's excellent guides:
Printer Sharing
File Sharing.
cheers
mrtotes

Please help... Linksys router and Imac help

I just switched to Mac, but I might be returning the Imac and getting a Dell or something because it's getting a little ridiculous.
My IP address on my Linksys router is not being recognized by the airport in my new Imac. It took FOREVER for me to get this to work and now it has crapped out 2 times in the last 4 days. I am about to take this new Mac back to the store and go back to a Dell.
Here is a basic description of what is happening:
When I do a diagnostic test I click on Airport and it is saying that the airport signal is fine (green dots), but it doesn't find the IP address. I select my network name that the Airport is picking up and still nothing. I can even get online by selecting a different wi-fi signal from someone that lives close to me too. It's obviously something with my Linksys router that does not work well with my Mac.
Also, even when my Mac doesn't get online, my Ps3 and 360 both still do so I know it is the computer/router that is the problem.
I try unplugging the router, modem, restarting...etc. but it just seems so wierd that it goes off like that.... It's also very annoying, because then I have to hear from my wife about that we spent $1500 on a computer that won't get online some of the time, when I can still get online on my PS3 and 360.
By the way, when I am not connected to the internet Safari will NOT let me put in the 192.168.1.1 in the address bar to get to my router settings. But I did check them from my PS3 and the "clone my MAC" thing is still enabled.
Apple's software update tells me there's no new software available for my machine, which leaves me with no idea what's causing this or how to fix it.
Any advice, solutions, or tips are greatly appreciated.
Can anyone please help me??? If this is going to be a continuous problem, I am taking the computer back and getting a new Dell or something since we mostly use the computer for the internet functions.
Anybody please help???

Let's double-check your iMac's AirPort settings ...
System Preferences > Network > AirPort
o Location: Automatic
o In the left column, verify that an AirPort option exists. If it does not, click "+" to create one. (Note: If you are unable to create an AirPort configuration, the AirPort card in your computer either doesn't exist or it is not recognized.)
o Verify that AirPort is "On." Click "Turn AirPort On" button if not.
o Ask to join new networks: (enabled)
o Show AirPort status in menu bar: (enabled)
Systems Preferences > Network > AirPort > Advanced
AirPort tab
o Remember any network this computer has joined: (enabled)
o Disconnect from wireless networks when logging out: (enabled)
o Require Administrator password to control AirPort: (disabled)
TCP/IP tab
o Configure IPv4: Using DHCP
o Configure IPv6: Off
DNS tab
o DNS Servers: <if required, add your desired DNS server IP address(es) here>
o Search Domains: <if required, add your desired DNS Search Domain(s) here>
WINS tab
o Enter desired WINS info or leave the defaults
AppleTalk tab
o Make AppleTalk Active: (disabled)
802.11X tab
o Enter desired 802.11X info or leave the defaults
Proxies tab
o Enter the desired Proxies info or leave the defaults
If you connect your iMac directly, using an Ethernet cable, to one of the LAN ports on your Linksys router, can it access the Internet now?

HELP PLEASE !!! Can't get Linksys router to work.

Okay, I am a new owner of an Alu-imac 2.4 ghz !!!!!!
Installed Leopard last night and wanted to get my internet set up and ……. IT DIDN'T WORK !!!!!!!!
The Diagnostic thing wouldn't recognize my internet.
(Info for you):
1) I have an Linksys wireless router that is right behind the computer. I have to have a router for my 360 and my PS3 across the room. So I had the cable internet modem hooked to the wireless router and then to the computer. (just like it was hooked up to my PC)
2) I tried everything I could think of to get it to work. The diagnostic show that the Ethernet had a green light, but it would not let me online at all.
3) So then I tried unplugging the modem and the router and still nothing. (It gets stuck on the page where it asks "do you use a cable modem, if so please restart it and then hit continue") And still nothing.
4) So then I tried to just run the internet straight from the cable modem to the imac, and this didn't work either….. Then for some reason like a 1/2 later the network settings brought up the IP and everything and I had internet.
5) *But I need my Linksys router to be used !!!!* Is there any advice any of you can give me !!! I can call Linksys if I need to when I get off work, but I thought maybe some of you could help me first. *I did have to call Linksys before I could get the router to work on my old PC as well*, so maybe it's something with them ????
HELP PLEASE !!!! I want to love my Imac so much.

fonz500, are you still having this issue or is this now a dead thread?
Let us know if your still need help.

Help! Have a Linksys Router WRVS4400N, Ipad and Desktop doesn't get internet at same time. Just one of the other. How do I internet on both? Thx!

HELP! How do I get wireless internet on both my Ipad and Desktop? Have Linksys Router WRVS4400N. Only 1 device will work at 1 time. Something about a Learn MAC address? What should I do? Thanks! Tiggergirl

Good morning
Hi Kathy, my name is Johnnatan and I am part of the Small business Support community.
If you have an old firmware it would be a good idea to go out to Cisco.com and see if there is any firmware updates. I have looked on the site for you and I see the latest firmware is:2.0.2.1
http://www.cisco.com/cisco/software/release.html?mdfid=282414016&softwareid=282487380&release=2.0.1.3&rellifecycle=&relind=AVAILABLE&reltype=all
You can also try to reset your device to its factory settings, to reset your router please take a object that has a point and hold the reset button in on the back for "atleast" 30 seconds until the lights on the front to start flashing.
About Mac address, you can map a Static IP with a specific mac address, You can folllow these steps in order to configure it.
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=4&app=search&vw=1&articleid=1272
Thanks,
I hope you find this answer useful,if it was satisfactory for you, please mark the question as Answered.
Greetings,
Johnnatan Rodriguez Miranda.
Cisco network support engineer.

HELP I have a wireless Linksys router WRT54G connected th...

HELP I have a wireless Linksys router WRT54G connected through my cable company broadband modem on a Mac. I have another computer to which I installed wireless capability because it didn't come with it. This required attching some piece of equipment to the back of the PC which enabled it to get on the internet without another cable modem. My question is this. If I get an iphone or a laptop(with built in wireless ability) will I automatically be able to go on the web because of the router on the Mac.

yes certainly... if you get any wireless device in network that would certainly connects to a wireless n/w of router...

Help required please with installof a Linksys Router iMac G5

Thanks in advance for any advice or help.
I wish to connect an iMAC G5 directly to a Linksys Router with 4 port switch.
Any ideas on this as the Linksys CD does not have Apple software.
Thanks
Fergal.

Welcome to the Apple Forums!
Sure, it will work. I'm uncertain as to the model that you are referring to, but generally, once you plug in your iMac to your linksys router, you will access it via your web browser at 192.168.1.1 and there is no user name and the password is Admin.
Take a peek at the documents that came with your router and look for the section called "Web based" administration and that should get you up and running.
Let us know if you have any other issues.

Problems with linksys wireless router please help!

Me and my 2 flat mates share a wireless network, and for some reasons if cannot connect to it. I have vista home premium and a belkin dongle. We used a Linksys router to begin with, not sure which model, but we recently had to buy a new one because that did not belong to us. I can see the network so the dongle picks up the signal but every time I connect and put in the network key I either get Not close enough to the net work point (the router is about 5 meters away) The network key is incorrect (I created the password and it works on the other two people lap tops) The network has timed out. Sometimes I can connect to the network for a moment then it kicks me off. The connection wizard shows the network at full signal. I’m not sure what the problem is, I have done a full restore on my computer and the dongle was installed onto my computer via the disc it came with. I do have another dongle that is a Linksys one; however it does the same thing. Not sure what the problem is here, can anyone help before I have to go out and buy long network cable and have wires all over my flat i have a heap of work that needs doing this week so any ideas would be really helpfull

I would first try and bring your computer (if possible) closer to the connection point. That way it will have full time to connect. Also sometimes some materials in the walls mess with connections due to the type of material. Sometimes if your IP address is not quite right you will connect but then get booted offline. Sometimes if you don’t broadcast your ssid you cannot connect. (one of my Visa Networks does this ssid broadcast must be on).
Are you using WPA or WEP because Sometimes WEP is not as stable with some wireless modems/ so changing to WPA might solve your problem
With Knowledge… Impossible means nothing.
Credentials
Computer experience: 11 years
Cisco networks experience: 8 years
Network administrator: 6 years
N.E.T. networks experience: 6 years
Linksys networks experience: 6 years
Recent additions: A+ | Networks+ | Linux+ | Security+

Need help to set wireless Linksys Router WRT150N to work with Nettalk Duo

I have Linksys Router WRT150N , connect to it Nettalk Duo but there is no ring tone, the orange light is flashing trying to connect, then i have the green light blinking then go Red.
I thied to call Nettalk but no answer to their phone, chat with customer support at last they said someone from technical support will call back, but that not happen since two weeks.
I make several tickets to them but no reply, service is very bad.
Please any help to configer inside the router to recognise Nettalk, i have cable internet they said there is no blockage from there side.

Hey sam63. Based from what I've read, RED lights means the device has failed to connect to the network. I'd suggest that you perform a powercycle. Unplug the power of the NetTalk Duo and the router for 30 seconds. Once done, power on the NetTalk first then, the router. Also, make sure that it is properly connected to the router's Ethernet port and the router is working online. You may try using another Ethernet cord or plug it into another Ethernet port.
If that won't work still, I found a link that might help you. Here: http://www.nettalk.com/support/customer-support/
Help, learn and share

WRT160 N- Worst Linksys Router YET!!!!!!!!! HELP!!!!!!!!!!!!

This is my second Linksys router the first large bulky one worked amazing.
This new model I have replaced 2 times at Office Depot and now they will not take it back. I was on the phone for hours and no one knows why it says connected but will not open a page.
It was the most expensive router available suppose to have great signal, and it cannot be configured to work in the same place the other router was located.
How can I request a full refund? Who can explain why Im connected but I cannot open a page of the internet.
This was a waste of time and money and Im hestiant to buy Linksys again.
ANY IDEAS??

Who is your Internet Service Provider ?
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Linksys router requires ethernet port-help!

Bought new Linksys router that's Mac-compatible, thought I'd connect it to my Ethernet source, then connect MacBook Air to the router wirelessly, but the router's setup software (run on external SuperDrive) insists I connect an Ethernet cable from the router to the Air...obviously, that's not going to happen. Even if an Ethernet-to-USB adapter did the trick, I wouldn't want to buy it just for this setup.
Anyone know a workaround? All I've thought of is to haul my iMac up to this new office, do the installation/setup on the iMac, then once the router's up and running, connect wirelessly with my Air...if that'd work.
Any thoughts? Much appreciation, Lee

Hi Linksys. I am in a hotel in Wuhan China and every time I go to use their ethernet plug in through an adaptor it still does not give me access to the internet, the problem is that whilst I am at work I have no problem getting on line with wifi; however for all those times when i wish to use Skype or just e-mail someone, I cant get on. I bought the adaptor and when I use it all I get is a message saying that there is a problem with the 3 ports, and then advises me to check my firewalls.
So buying an adaptor is not working for me. If you find an answer then please let me know.

I'm Able to connect AE to Linksys Router: Some tTps

OK:
For several weeks (off & on) I have been trying to connect my Airport Express to my Linksys WRT54G wireless router network, but have run into several recurring bottlenecks. Well, I feel that I have busted through the dam yesterday, based on some feedback from folks, along with a lot of trial and error. Below, I address a couple of problems that keep recurring in this forum.
*Problem 1:*
My AE in no longer seen on my network.
Solution:
My AE should have its own Apple ad-hoc network, if all I have powered-on is my laptop, the AE and a set of powered speakers that the AE will stream music to.
The AE's ad-hoc network should show up in your system tray's connection window
with a name similar to "Apple Network XXXXXX" , where XXXXXX represent the AE's 6-rightmost hex digits of its 12-digit hex MAC (Media Access Control) address.
Last week, I did a complete factory reset on the AE. Yesterday, when I tried to have the laptop generate an ad-hoc network, it couldn't: it kept trying to attach to a prior network that I had created with my router (which by the way, is currently turned off), but couldn't find it. I did several more factory resets, with no luck. The AE would not generate the ad-hoc network ! I tried both, with and without an Ethernet cable running from the AE to the laptop.
Frustrated, I took a gamble and did an "intermediate" reset of the AE.
Note: The AE is wired to the laptop, plugged in, with stereo speakers connected and turned-on. Using a paper clip, I pressed-in the AE's reset button, and held it for ~10 seconds. It worked I could now see my "Apple Network XXXXXX" ad-hoc connection listed in my system tray's list of networks to connect to.
Now that I had the ad-hoc network for the AE, the question was to figure out how to add this device (the AE) to the Linksys router's wireless network.
*Problem 2:*
I'm unable to add the AE to my existing Linksys wireless network.
Solution:
I turned on the cable modem and the Linksys router, and let them boot.
At this point , I have the AE hardwired to the router via Ethernet cable.
I opened the Linksys Easy Setup (or similar name) Help tool to view what the Linksys tool could see. It saw that the laptop was connected to the router, but not the AE. Initially, the laptop was connected via Ethernet cable to the router, but I then made that a wireless connection withe the Easy Setup.
I opened Airport Utility and proceeded to configure the network for AE, via a Manual setup. Airport Utility was able to see my ad-hoc network and saw the AE, with its name "Apple Network XXXXXX".
I wanted to have the AE join my existing 64/40-bit WEP wireless network.
I had followed all of the prior advice but with no luck.
Here's the kicker:
On one of the the Airport Utility tabs:
You want to select to "Join A Wireless Network".
On the tab that has the checkboxes , check your settings:
"Remember this password in my keychain" (Optional, I have it checked)
"Set time automatically" (unchecked)
"Advertise configuration globally using Bonjour" (unchecked)
If you have the "time" and/or "Bonjour" checkboxes checked, you will get a different set of network connection types to select from under the Wireless tab, and the typical WEP settings (WEP 60/40) won't be among the choices
This is where I was having problems. If you use the above checkbox settings,
you WILL get the WEP 40 in the drop-down menu to choose from under the Wireless tab. Make sure that the password/encryption key that you use for is the same that your used for when setting-up your wireless router. You do not have to precede it with a $ sign. (Example: when you setup your WEP-40/64 connection with your router, you had to use a 10-hex digit encryption key, or provide a 5 ASCII character Passcode that would be converted into a 10-digit hex encryption key. My advice: Forget about the PassCode...just type in a 10-hex-digit key into the Key 1 slot in the router setup, and USE THIS SAME KEY in Airport Utility. It will be 10 hex digits long, where hex-digits are 0-9, and A-F.
Finish the setup, and once Airport Utility reconfigures, you will get the solid green LED on the AE. At this point disconnect the Ethernet cable.
Now, open your router's setup program and check the network. You should now see the AE on the same network as your router and laptop, wirelessly !
Open iTunes. In the lower-right corner, you should see a dropdown menu from which you may select speakers. Select your speakers by the name you gave them.
Click on any tune that you have in iTunes, and click the Play button. You should now be able to hear the tune playing out of your speakers, wirelessly !
You are no longer using the ad-hoc network. You now have the AE connected to same same wireless network that your laptop is on, via the wireless router.
Music is playing from iTunes (via AirTunes) on your laptop, though the router to the AE, to the speakers, wirelessly !

you don't mention which products you use
only ipad2 and up support mirror
and only iphone4s and up support mirror
other devices only use airplay for apps which support tvout options

17" mbp no longer sees a 802.11a Linksys router...

I have one of the early 17" MBP. It used to work with a old 802.11a (Linksys) router. Lately it doesn't see the router at all. I've reset the router and another Windows machine can see it fine. I didn't do anything funny other than apply patches and firmware upgrades. Any help is appreciated.
Thanks
Macbook Pro 17" Mac OS X (10.4.7)

Maybe its helpful you to know that the 802.11a standard wasn't totally supported by Apple at the begining (read http://www.appleinsider.com/article.php?id=1465) so probably those patches did change something.
Have you tried different frequencies on the router?
Chris

Linksys router no longer works with Westell 6100 modem

Hi all,
I came back after a 3 month work absence (and many days power outages, according to the neighbors), to find that my system can no longer connect to the internet using the Verizon Westell 6100 modem to a Linksys wrt54G router to 2 PCs!
I reset the Westell modem and directly connected the PC to it and THAT works okay, but put the router back in the mix (so I can connect my other PC) and nothing works!
I have read on this forum about 'Bridgeing" the Westell modem but nothing about setting up the router.
Can someone PLEASE give me explicit instructions on how to:
    1.) set up the Westell modem in this "Bridge" mode,
    2.) Set up the Linksys router to work with the modem again??
    3.) Tell me why the old setup no longer works, did verizon change something for this modem?
Thank you VERY much for your help in this matter!
SUE ;>)

the router has two connections. one is called a WAN and that is a wide area network, and it means the internet in your case. and one is called a LAN, local area network.
what you saw means - that the way you connect to your internet is through PPPoE, a username and a password.
and then way your LAN connects is DHCP, how all of your local computers connect. This is important, because after you bridge the westell, you will be setting your Linksys up for PPPoE connection, and NOT DHCP. if you don't do this step, then you will never connect.
that is fine, and normal. if you follow the instructions at the link provided - you will be able to connect real easily.
you will want to bridge the westell just follow the instructions for "If your Westell uses the red and black Verizon firmware:"

Linksys Router - XBOX - HELP

Similar Messages

Maybe you are looking for