Linksys Smart Wi-Fi inaccessible [Fixed]

We are aware that the Linksys Smart Wi-Fi site is currently inaccessible. We are investigating and we will post an update when this is fixed. Please bear with us. Thank you.
Update: The issue has been fixed.

Hi,
If I got it right if the device is connected to the main network and goes to sleep mode , it will stay connected , is that right?
And if the device is connected to the guest network and goes sleep mode, it will not connected anymore once it awakes, is that right ?
I believe that I can make it

Similar Messages

  • Linksys Smart Wi-Fi Outage [Fixed]

    We are aware of the Linksys Smart Wi-Fi outage this morning. Our engineers are actively working and we’ll update this announcement as soon as we have a fix.
    Update: Oct. 24, 1:30pm PDT
    The Linksys Smart Wi-Fi outage has been fixed. Thank you for bearing with us.

    Its working for me. Are you trying remotely or from inside your network?

  • Old wine in new bottle... Linksys Smart Wi-Fi

    Linksys Smart Wi-Fi, wow a new nice feature!
    Or "just" Cisco Connect Cloud?
    Cisco keeps trying to sell us "new" things.
    They better release real new things, like the promissed Classic Firmware upgrade for the "Linksys Smart Wi-Fi" enabled routers.
    We still deal with 2.0.37.131047 while the following issues are fixed in the CCC release:
    - Added support for Class B and C subnets
    - Updated WiFi driver
    - Fixed guest network setup issue when router LAN IP set to 192.168.3.1
    - Fixed some minor issues

    What ever it is, it is close to hot air.
    What the consumers would really appreciate are bug fixes, reliable routers and real enhanced wireless range.
    The current routers do have bugs, due to the bugs they are less reliable and due to the sleek design with the tiny internal antenna's the wireless "g" range is for sure less then a good old WRT54G, giving many people very bad feelings.
    It is cool to release 802.11ac products, it is cooler to make sure you produce real good products and give the best support.
    Why is Linksys able to sell the WRT54G series for over 10 years (it is still sold), simply because it does what the box says and it does it reliable, plain simple. Why do many people buy an "EA" router, because they have the excellent experience of the WRT54G series.

  • Linksys Smart WiFi doesn't support IE11

    Has anyone had trouble accessing Linksys Smart WiFi with IE11. I keep getting browser not supported and it won't let me in. I can't even get in using the routers IP settings.

    This was my fix! I downloaded Mozilla FireFox, installed and it worked great with Smart WiFi. I then tried IE11 again and guess what? It worked like a charm and is still working. Go Figure!

  • HP Officejet Pro 8500a prints slowly over wireless on Cisco Linksys Smart Wi-Fi Router EA6500

    I have the HP Officejet Pro 8500a. I recenrly change my wiress router to the Cisco Linksys Smart Wi-Fi Router EA6500.
    Nearly every time I print, the documement remains "pending" for at least several minutes, sometimes as long as 20, until it finally starts printing. Once it starts printing, the document is printed quickly.
    It doesn't matter the size of the document and the time it remains "pending." I've done test pages with just the word "test" in a Microsoft Word document, and it will remain in "pending" for well over five minutes.
    If I print over the USB cord, there are no delays.
    I need help. I can't figure out how to remedy this long delay when printing wirelessly.
    On a side note in case this is helpful, the Linksys router does have a priority setting where you can select up to three devices for priority access (faster connection?), which seems to be more for bandwidth-intensive devices. I tried adding both the laptop I'm printing from and the printer to this priority list, but that did not improve the print connection speed.
    Advice please! Thank you.

    Hi Jim-Gr,
    I understand you have an Officejet 8500A that has started printing very slowly after switching routers. I'm sorry to hear this has happened but will certainly do my best to assist you.
    I appreciate you advising that you have tried connecting the printer via USB and it does make a huge difference. I'm also assuming your previous router didn't go this slowly either. With the things you have tried, my assumption is that it's a setting in the router that needs to be changed. If you're not sure how to change things in your router you can generally call the router company and they will walk you through it.
    First you will want to ask them if there are any firmware updates for your router, if there are have them perform the update. If it is up to date already then have them make sure your router is broadcasting at a frequency of 2.4 GHz as that's the only frequency the printer works with.
    Second, you will want to make sure the following ports are open:
    UDP: 427, 161, 137, 138
    TCP: 9100, 9220, 9500, 137, 139, 427
    Once all of this is updated, then I would suggest you power cycle everything (turn off the printer and the PC, pull the power on the router for 30 seconds and then turn the other two back on once lights are back to normal) and try again. This should allow your printing speed to go back to normal
    Hope this helps, have a great day!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Device in Linksys Smart Wi-Fi is listed with two MAC address - not correct.

    I am using a EA4500 and use Linksys Smart Wi-Fi to manage the device. In the household we have multiple Apple i devices. Somehow the Linksys Smart Wi-Fi combined two separte i devices (iPhone 5 and a 4th generation iTouch) to one user.
    The devices actually have different names, but the Smart Wi-Fi is combining them into one device. So I can't use Parental Controls on one of the devices.
    I hope you can help me on this. We have made sure both devices have different names.
    192.168.1.106
    F01:A9:95:67:17
    192.168.1.122
    88:C6:63:B0:5F:88
    Solved!
    Go to Solution.

    Before you decide to used the classic firmware, I would suggest that to try to manually add your TV under the DHCP reservation of the router's UI.

  • Linksys smart Wifi error while deleting offline device from device list

    i have Cisco Ea4500 with linksys smart wifi, each time i try delete offline device i get error message.
    anyone can help?

    What browser did you use in deleting offline devices? Are you doing it under the Device list? If yes, normally it should be deleted because those are widgets only. Can you try your other browsers? And do it on the main computer.

  • Linksys Smart Wi-Fi Maintenance

    We will be conducting a scheduled maintenance on the Linksys Smart Wi-Fi cloud this Sunday from around midnight to 2:00am PDT.  During this time remote access services will be intermittently unavailable.

    Hi,
    If I got it right if the device is connected to the main network and goes to sleep mode , it will stay connected , is that right?
    And if the device is connected to the guest network and goes sleep mode, it will not connected anymore once it awakes, is that right ?
    I believe that I can make it

  • Linksys Smart Wi-Fi Scheduled Server Maintenance [Completed]

    There will be a scheduled maintenance on the Linksys Smart Wi-Fi Servers on March 5th that will start at around 12am PDT. The Smart Wi-Fi Portal and Remote Access will be unavailable during this time. The maintenance is scheduled to last for approximately 2 hours. Thank you.
    Update: Scheduled maintenance completed.

    Is there any representative from Cisco that reads this forum? I certainly would like Cisco to check their server for any bug that is causing this error! This is getting really frustating with no support from Cisco at all. Big regret buying this router!!

  • Linksys Smart Wi-Fi services Status: Gestopt

    Hi, I have the following message in the status report : Linksys Smart Wi-Fi services     Status:     Gestopt Also, I am not able to logon into the EA6900 with the iPap app. Please advice. Thanks, Arjan 

    Do you get that error message when accessing the SmartWifi page from a mobile device? How about if you access the page using a PC's browser? Try http://192.168.1.1 or www.linksyssmartwifi.com.

  • Is Linksys Smart Wi-Fi vulnerable to Heart Bleed OpenSSL

    I am curious to know if Linksys Smart Wi-Fi site or routers are vulnerable to the Heart Bleed OpenSSL exploit?
    http://siliconangle.com/blog/2014/04/08/openssl-heartbleed-vulnerability-may-affect-millions/
    BTW: Change your passwords people...
    Solved!
    Go to Solution.

    Thank you, E4200 also has 0.9.8n

  • Linksys Smart Wi-Fi Account -- Logging in

    I don't appreciate having to use the Captcha that you all use. It is mostly impossible to identify the letters used in the FAKE FAKE FAKE FAKE words. They should not be called words if they are not words. So either get a better set that are easier to use and are words (or don't call them words).

    I recommend that you phone contact your regional Linksys support office and ask for help and information regarding this.We find that phone contact has better immediate results over using email. Nudibranch wrote:
    Can you help me too, please?  I'm so frustrated I could spit.  All I want to do is create an account, not while away my hours trying to read some stupid captcha that doesn't even have a right answer.  After over a year of complaints, you'd think someone would be able to figure out why the Linksys Smart WiFi registrations are embarrasingly low. 

  • Linksys Smart Wi-Fi Firmware Upgrade: "Media prioritization Error"

    Router: Linksys EA3500 Dual-Band
    Looking for help concerning my most recent upgrade which was, cisco connect to linksys smart wifi. Keep getting same error code..

    Duplicate post #4.

  • Ea3500 linksys smart wifi reboots every 5 secs

    can not connect my ea3500 (v1.1.39....) with linksys smart wifi from iphone 5s iOS 7.1.2 it reboots every 2-5 secs endlessly
    also can not connect it from the web via latest firefox and IE after input in my login and password the circle spins endlessly
    reboot doesnt help, only restore
    tired of restoring it
    does anyone have this problem? maybe new sw is needed?

    Ok so the router is ok but the app on your iphone reboots? Have you done a full power off on your phone lately? If that doesnt work try a reboot on your iphone. 
    Begin by holding the sleep/wake button at the top right of the device and the Home button at the bottom center of the face at the same time.
    Hold them both until you see the screen go black. In some cases, you may need to keep holding them even after the red power-off slider appears. If it appears, just keep holding it
    Wait until the silver Apple logo appears.
    When this happens, you can let go - the iPhone is rebooting

  • Port used for Linksys Smart Wifi

    Good day,
    Please i would like to find out the port used for Linksys Smart Wifi Login via the Internet. I have blocked alot of ports on my router and i am not able to login via the Internet again.

    Blocking unknown isn't normally required because the router firewall does that normally. Blocking specific port is good but you need to know what they are used for. UPnP devices will open ports as needed if you have UPnP enabled on the router.
    Sorry I don't know the specific ports or process remote access uses. I sure it's a dial out feature and not a dial in.
    Please remember to Kudo those that help you.
    Linksys
    Communities Technical Support

Maybe you are looking for

  • Problem with Places in Aperture

    Using OS X 10.9.2 and Aperture 3.5.1. When choosing a project in Aperture and click on places a map appears but no photos in the bottom browser. Just a blank strip of nothing. I deleted and reinstalled Aperture, but no luck.

  • I can't paste text from other programs

    For some strange reason, PE12 wont let me past text from other programs and Idk why?!

  • While creating quotation/sales price an error occur

    hi experts i have done cost planning using ECP , i have created inquiry and also assigned DIP profile to inquiry and Project Definition as well. Now , when i am creating sales price/quotation thru DP81 iam getting an error message." Error during mate

  • Auth check

    hi, iam using job_submit FM  to run a job in background. iam also passing the parameter authcknam to the FM which is not equal to sy-uname but the job gets released with my user name (sy-uname). how can i release the job with the user name i want? th

  • To find Missing DB Objects from one schema,sid to other schema,sid

    Hi Friends.. I have an requirement as bellow... Recently we migrated from one schema to other ,some of the DB objects are missed while migrating. After Migration now the schema and SID are Different for newly created schema while comparing the newly