Linksys Smart Wifi now supports Mac OS 10.8 Mountain Lion

You can download the software here.
http://homesupport.cisco.com/en-us/support/ccc
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Make sure your Mac qualifies to run Mountain Lion > Apple - Upgrade your Mac to OS X Mountain Lion.
Disable anti virus software then try resuming the download.
Apps such as Little Snitch, Net Nanny, and Hands Off can prevent apps from downloading including Mountain Lion.
Keep in mind, for downloading Mountain Lion from the App Store, a high speed (broadband) internet connection is strongly recommended by Apple as noted here > iTUNES STORE - MAC APP STORE - TERMS AND CONDITIONS
If you need to reinstall OS X or repair the the startup disk using Mountain Lion Recovery, that requires broadband access to the internet via Wi-Fi or an Ethernet connection. OS X is downloaded over the internet form Apple when OS X Recovery is used for reinstallation.

Similar Messages

Linksys Smart WiFi doesn't support IE11

Has anyone had trouble accessing Linksys Smart WiFi with IE11. I keep getting browser not supported and it won't let me in. I can't even get in using the routers IP settings.

This was my fix! I downloaded Mozilla FireFox, installed and it worked great with Smart WiFi. I then tried IE11 again and guess what? It worked like a charm and is still working. Go Figure!

Linksys smart Wifi error while deleting offline device from device list

i have Cisco Ea4500 with linksys smart wifi, each time i try delete offline device i get error message.
anyone can help?

What browser did you use in deleting offline devices? Are you doing it under the Device list? If yes, normally it should be deleted because those are widgets only. Can you try your other browsers? And do it on the main computer.

Ea3500 linksys smart wifi reboots every 5 secs

can not connect my ea3500 (v1.1.39....) with linksys smart wifi from iphone 5s iOS 7.1.2 it reboots every 2-5 secs endlessly
also can not connect it from the web via latest firefox and IE after input in my login and password the circle spins endlessly
reboot doesnt help, only restore
tired of restoring it
does anyone have this problem? maybe new sw is needed?

Ok so the router is ok but the app on your iphone reboots? Have you done a full power off on your phone lately? If that doesnt work try a reboot on your iphone.
Begin by holding the sleep/wake button at the top right of the device and the Home button at the bottom center of the face at the same time.
Hold them both until you see the screen go black. In some cases, you may need to keep holding them even after the red power-off slider appears. If it appears, just keep holding it
Wait until the silver Apple logo appears.
When this happens, you can let go - the iPhone is rebooting

Port used for Linksys Smart Wifi

Good day,
Please i would like to find out the port used for Linksys Smart Wifi Login via the Internet. I have blocked alot of ports on my router and i am not able to login via the Internet again.

Blocking unknown isn't normally required because the router firewall does that normally. Blocking specific port is good but you need to know what they are used for. UPnP devices will open ports as needed if you have UPnP enabled on the router.
Sorry I don't know the specific ports or process remote access uses. I sure it's a dial out feature and not a dial in.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Cannot get epson stylus office tx610fw printer to print now that Ive updated to osx mountain lion, have had no success getting my mac laptop to update latest apple update for epson printer

cannot get epson stylus office tx610fw printer to print now that Ive updated to osx mountain lion, have had no success getting my mac laptop to update latest apple update for epson printer

John Blanchard1
Re: can't print to Epson TX610FW
Jul 28, 2012 10:23 AM (in response to normdrexel)
Try installing the Epson drivers from here:
http://support.apple.com/kb/DL1398
and then seeing if adding and printing with USB works.
This site really works and my computer is now printing.

For some reason osx mountain lion has disappeared from my purchases and now when i want to install mountain lion on another mac with the same apple id it wants to charge me for the program even though i have already purchased it. what do i do?

for some reason osx mountain lion has disappeared from my purchases and now when i want to install mountain lion on another mac with the same apple id it wants to charge me for the program even though i have already purchased it. what do i do?

Open the Mac App Store on the other Mac and in the Quick Links sign into your account. See if the Mountain Lion purchase is among hidden apps in the iCloud area of your account info.

Is my mac pro compatible with mountain lion?

Is my mac pro compatible with mountain lion/ 2 x 2.66 Ghz Dual core processors?
Any help would be appreciated. Thanks
William

And FBDIMMs which use to cost $300+ for 8GB can now be had for... 2 x $34.
I paid $300 2 x 512MB August 2006,, then 2 x 1GB $400 March '07
So as long as you only need 16GB you are safe, it is when you need 4GB, or the rare 8GB FBDIMM and 32GB or more, that yes, time to part ways and get a system that supports cheaper DDR3.
Except, right now, 10.8.2 'broke' support for more than 64GB and there were people depending on and using 96GB. Or that more than 48GB also 'broke' the Apple Pro RAID card; a card that still does not support 3TB drives. 10.8.2 does though provide support for more current Nvidia cards (10.7.4 also showed support just not for GTX 6xx series). 3rd party graphic support has always been a weakness, until now.
Apple Mac Pro is a workstation. Except when it is not. It is still not clear how they missed these things.
What 32-bit EFI won't get you is 64-bit kernel mode and abilty to fully use more powerful graphic cards or memory addresses for a single process beyond 4GB or graphic card support with more than 2GB (and 2GB use to always fail in OS X in the past).

One of the users on my Mac book pro, running Mountain lion finds that no changes made in last session are there next time they log on

One of the users on my Mac book pro running mountain lion finds that no changes made in last session are there next time they log on.
For instance, the Macintosh HD icon, is always moved so that it is almost off the screen to top left hand side of the desktop.
None of my changes to the sidebar in the finder are there.
My changes to the dock have reverted.
Despite unticking the box when logging out, even though i have quit all applications, iphoto and safari are always re-opened.
iphoto always says the library needs to be upgraded... even though i did that the last time.
I have tried deleting ALL the files in the "Saved application state" folder in the library folder, but that doesn't seem to make any difference.
This is on a second admin user account.
The main user account seems to be fine.
This account used to be in the filevault on Lion, but is not now in Mountain Lion.
Can anyone help?
Thanks

The same tragic thing happened to me, not even a full two days after I bought it. I immediately powered it off, wiped it as best I could, and put it in front of a fan. I tried valiantly to get the back off, but couldn't remove all the screws. I was basically inconsolable until I realized that no matter what, my credit card insurance would cover it, since it had been less than 90 days. Fast forward 48 hours, and it seemed to run just fine. Some of the keys and the track pad were sticky, and I figured since it was covered, I might as well get it fixed. My only concern at this point was had I voided the Apple Care. I brought it in, told them what happened, said what I needed to satisfy the credit card, and they said, "We'll just swap it out for you, no problem." I was thrilled, and the Genius said they appreciated my honesty, and it was easier for all parties to just do it this way. And my Apple Care was transferred to the new machine. This was my first Mac and, needless to say, I am now an Apple devotee.

Just updated my mac from Tiger to Mountain Lion. Loaded Photoshop elements 11 (brand new in the box) and when I try to start it - it comes up saying - Licensing for the product has stopped working contact for help.

I just updated my mac from Tiger to Mountain Lion. wiped the computer clean and started fresh Loaded Photoshop elements 11 (brand new in the box) and when I try to start it - it comes up saying - Licensing for the product has stopped working contact for help. in Looking for help I was directed here. what do I do?

I don't know enough to not follow directions. I bought the software brand new in a sealed from factory box. Had it sitting around until - last week when I deleted flash on my computer and had to upgrade to the new OSX. Mountain Lion doesn't use iPhoto - so I had to go with something else. Since I already had this new - unopened package I opened it up. Shut down all running programs - inserted the disk and followed all the directions for installation. Still it didn't work.
I have now uninstalled it (the proper way) and am going to try again.
I appreciate your responses.
Thank you!
If this doesn't work - I am going to just buy Lightroom.

Mac book spec for mountain lion

I am trying to purchase and install mountain lion. I have a macbook 4 see spec below.
Model Name:          MacBook
Model Identifier:          MacBook4,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.1 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          1 GB
Bus Speed:          800 MHz
Boot ROM Version:          MB41.00C1.B00
SMC Version (system):          1.31f1
Serial Number (system):          W8812G560P0
Hardware UUID:          426BE2F4-72CC-5963-9D53-96F7F744E660
Sudden Motion Sensor:
State:          Enabled
I am getting a message saying that my macbook is not good enough! can anyone tell me if this is true and if the only way is to spend £1000 and buy a macbook pro!
if so has anyone got £1000!!!!!

This is the list of machines that are compatible, if yours is not on it it is not compatible.
Macs that will support OS X 10.8 Mountain Lion
MacBook Pro – 13″ from mid 2009 or later, 15″ from late 2007 and newer, 17″ from late 2007 and newer
MacBook Air – late 2008 and newer
iMac – models from mid 2007 and newer
MacBook – 13″ aluminum from 2008, 13″ from 2009 and newer
Mac Mini – early 2009 and newer
Mac Pro – early 2008 models and newer
XServe – early 2009 models and newer

MF4720w, duplex printing on Mac OS 10.8 Mountain Lion.

MF4720w on wireless network with MacBook Air Mid 2012 running Mac OS 10.8 (Mountain Lion)
Hi there that is what I'm doing as stated above. I finally got it to work but can't figure out how to get print in duplex instead of single sheets.
Can someone help? Thanks!

Download and install this: http://support.apple.com/kb/DL907
Restart your Mac.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

HT3986 After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system

After installed win7 on my mac pro(mid 2012/mountain lion), I can not connect internet and where can i find drivers in mountain lion system.
I donot think I have a install disk when I bought my mac, there is only a disc partition for recovery system.

Welcome to the Apple Support Communities
You have to install Boot Camp drivers. On Mountain Lion, you have to download them.
First, press X key while your Mac is starting to start into OS X. Then, open Boot Camp Assistant and select the option to download the drivers. You will have to burn them into a DVD or USB drive, so after downloading them, restart and install them into Windows

If I buy an Imac now how do i upgrade when mountain lion is released

If I buy an Imac now how do i upgrade when mountain lion is released

The same way most of us upgraded from Snow Leopard to Lion last summer. Perform one last backup just in case. Make sure all important software is up to date. Download the new OS from the Mac Apple Store. Run and wait until the installer finishes.
That's the short version. If you do a little searching with Google you'll find Macworld did a very nice upgrade article for Lion and I'm certain 99% of it will apply to ML as well.

Trouble receiving FaceTime calls on my Mac Mini using OSX Mountain Lion

I have a Mac Mini using OSX Mountain Lion, an iPad 2, and an iPhone 4. I tried to receive a FaceTime call on my Mac but it was telling the caller that it was busy. I was however able to call her iPhone from FaceTime on my Mac and we connected that way. After our video conversation I tried testing this by calling my Mac from my iPhone. I also received the message that it was busy. I should also add that when I first received the call I had my iPad FaceTime turned on. The iPad was ringing but not the Mac. So I turned off FaceTime on my iPad and had her call me back again using my email address. As noted it said it was busy. Please help!

Do you have different FT addresses on your Mini, iPhone and iPad?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

Linksys Smart Wifi now supports Mac OS 10.8 Mountain Lion

Similar Messages

Maybe you are looking for