Linksys srw2048 unable to update firmware via xmodem (using hyperterm)

I have three srw2048 series switches at my new job. One updated fine via the web interface the other two (after I found a windows machine to use the web interface) looked as though they were uploading the new file but after a reboot I was still on the old verison. So I broke out the console cable. What I have done is to Download Software to the switch (option 1) this kicks me over into xmodem. Once I am in xmodem I choose to send a file (the latest rom) using the 1K Xmodem protocol it immediately gives me retries and errors until it reaches a threshold that ends the session. During this whole process zero k is transferred.
Boot Version 1.0.0.04
Software Version 1.0.0.49
Hardware Version 00.03.10
The only thing I can think is that I must need older files to upgrade to an intermediary version before loading the latest 1.22 rom file.

You might want to pose this question in the Linksys forums at http://homecommunity.cisco.com/
Also, try another terminal program like Teraterm Pro. Maybe it needs "classic" xmodem?

Similar Messages

Rebuild screen freeze - unable to update firmware as not docking. Help please

Hello, I've got an 8gb Zen.
Always worked fine til I tried one of those hand crank chargers, since then I turn it on and it will freeze on the rebuilding screen.
Ran scandisk on it - no joy.
Wanted to try and update firmware to see if that helped but it will not connect to computer via USB. It will charge from the usb but just not connected, nothing.
Any help appreciated. Thank you

QRe: Rebuild screen freeze - unable to update firmware as not docking. Help please? So, it freezes on the rebuilding screen after formatting? It is very odd. Just to make sure... you have formatted (not cleaned up) the device from the Recovery Mode menu, right?
My only suggestion now is trying to mount the device on another computer (try one with a BSD or Linux operating system) and format it from here. With some luck, you should be able to see it as a new USB dri've. I am suggesting one of these operating systems, as you have a chance to mount your player on them even if it does not boots up properly. (I did it to recover mine just before suspecting there was a discrepancy on the FATs stored of the filesystem.) In your case, you will have a chance to format the device (using a FAT filesystem, of course) from these operating systems. I am, however, surprised to see that the Recovery Mode format function does not do its work on your player.
If your device does not boot up and freezes on the scanning/rebuilding processes there is a chance you have a problem with your filesystem instead of a fried USB port. So, there is a chance you can fix this device yourself yet.

What is defference between updating Firmware via P...

I'm N85 user and I want to know What is defference between updating Firmware via PC an Via Device manager on phone?

Firmware updates are usually released via one method or the other, rarely via both.
The NSU method downloads entire ROM images from Nokia's servers, resulting in downloads of more than 100MB in some cases.
The FOTA method only downloads what has changed from the version running on your phone to the latest version available. This means much less data to download, usually around 4-6 megabytes, which is important if you don't have access to a wireless network and have to use your operator's packet data service.
The FOTA method is safer (because it doesn't involve a computer running a notoriously flaky operating system) and faster (because there's less data to download).
Otherwise, the end result is the same.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Mnh300 unable to update firmware

I keep getting error unable to update firmware .... when i clickon the update button...
any help ?

Also, don't forget this little ti-bit on post-firmware update from FAQ.
22. Why don't I see any changes on the NMH after upgrading the firmware?
The browser cache needs to be cleared after upgrading the firmware to the NMH. This is essential for new features to appear on the Media Hub's interface. FAQ
Message Edited by thekochs on 01-09-2010 05:35 PM
Message Edited by thekochs on 01-09-2010 05:35 PM

Problem for update firmware via FOTA (N79)

hi friends
i have N79, firmware v31.002 , i have come to know that new firmware v31.101 is out for nokia n79,
i tried to update firmware via FOTA, it shows "server not responding", i thought server might be busy at that time,
but i tried for two days it shows the same reply, i dont know whether my phone has any problem with that,
pls help me
thanks/regards

v31.002 is the latest version available till now in India for N79, I just checked, so no hurry at all.
regarding server not responding you may check options -> settings after *#0000# & it should have nokia as selected profile.

RV082 v1 unable to update firmware

So I have the RV082 router. I had it with a 1.x version of the firmware for a while and I was able to update to the first 2.x version of the firmware a few months ago.
This router is fairly old but works ok. I like to keep it up to date. I recall always looking for firmware updates and not seeing any, then out of no where there are 3 updates to the software. I was able to install the second 2.x version of the firmware. Now I was trying to catch up and install first: 4.1.1.01 and then 4.2.3.03.
I have downlodad both files multiple times and have been unable to update the firmware. It always says secure connection failed.
If it helps I am using ubuntu 14.04 and the lates version of firefox 36.x
I don't know if anyone has had the same issue or if they have any sugestions on how to make this work.
I would rather install alternative firmware but since it is an intel chip inside, not many people are writing firmware for a router like this one. I dropped all of my other linsys/cisco routers (about 6 of them) except this one.
Any help will be greatly appreciated.

> I have downlodad both files multiple times and have been unable to update the firmware. It always says secure connection failed.
I hope this is caused by requirement of HW version by these new firmwares. As you mentioned, you owns device with HW version 1. According download page it is clearly stated ("V3 hardware required"), that all never firmware versions than 2.0.2.01 requires HW version 3 of unit. I am afraid there is no newer firmware version for V1 HW version of RV082 than you already have installed.

HT201210 Unable to update apps via iTunes

I recently updated my iPad2 to iOS7. Huge mistake, but what's done is done. Anyway, since the update I am now unable to update any of my apps. Before the update I had no problems, but now it just kicks out the request and goes into a never ending loop of asking for my password without actually updating anything. Am I the only one with this problem?
In addition to this, I am now unable to use my messages function or FaceTime. Goes into the same never ending loop.

If anything like my Asha 311 how about going to Settings > scroll down off screen to connectivity > net connection - set to Wi-Fi first?
Happy to have helped forum in a small way with a Support Ratio = 37.0

I am told I need to update my Adobe Flash. I am unable to update it via the directed web site.

I have go to (http://get.adobe.com/flashplayer/) update my adobe flash. When I click on the link that says download now, nothing happens.
How can I correct this?
Thank you,
Mark

I always use the method(s) and links below to update. On the main Adobe Flashplayer page (the one you cited),
*Adobe will now download another browser if you do not un-check the box on the first page
*Adobe also downloaded, in the past, the troublesome getplus extension (an updater for Flash) on the page you cited
*May install Adobe Air along with Flash, which is not widely used at this point, except on mobile devices.
There are 2 versions of Adobe Flash; an '''ActiveX version''' for IE only and a '''Plugin version''' for most other browsers including Firefox. On a Windows system, you should always update both individually.
#'''Using Firefox''', go to the following direct download link and SAVE the download to your desktop so you can find it later: http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player.exe
#When the download is finished, close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#Click or double-click on the file you just saved to your desktop
#*In the installation window that appears, click the box to the left of "I have read and...." to place a check mark in the box
#*The "Install" button in the lower right corner will now be highlighted, click it.
#*The installation is quick.
#Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
#Direct link ActiveX version for IE '''''only''''': http://fpdownload.adobe.com/get/flashplayer/current/install_flash_player_ax.exe
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]

Unable to update VAP2 via LSMW

There is an LSMW for VAP2 transaction which uses records from the flat file to update the data.
I am trying to update the Salutation/Title of the contact person via VAP2 transaction using records from the flat file. In VAP2 transaction salutation/title appears as drop down menu, these recrods appear correctly in the Read Data and Display Converted Data step of LSMW but when I try to to update the same data in the last step of LSMW(Run Batch Input Session) it does not update the data also the data that appears in these screens of VAP2 is not correct one i.e. it is not from the flat file that I am using.
I am running the LSMW in foreground and I am providing the partner number at each step of the LSMW.
Please suggest me what could have gone wrong.

Because you did a hard-reset already, I recommend the Nokia Software Recovery Tool because that tool makes sure you get all software/firmware components again, even the demo-stuff from mass storage. By the way, if you do not get Nokia Belle Refresh (111.040…), please give us your Product Code (dial *#0000#) so we can look into that, and why. Otherwise, the Nokia Store on the phone does not work anymore …
cms145 wrote:
I'm unable to sign in to Nokia Suite as "could not connect to server".
There you go …

Satellite Pro A200 (PSAE7): unable to update firmware under Vista

Hi,
I tried tp upgrade the firmware of my HD-DVD drive (SD L802B) with the new TO35 firmware, but it is not possible. The upgrade button of that Winvup is not selectable. I had the same problem with an older firmware, but i just thought this was because the firmware was up to date ( notebook is 1 month old).
Winvup displays my drive as "TOSHIBA DVDW/HD SD-L802B TO01 (10/26/07)". The discription of To35 says, it needs a version of TO33 or T034, is that the problem?
I got this firmware update form [Link to firmware|http://de.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=DE&mode=allMachi nes&action=search&teddProduct=737]
so it should be the right one.
So what can i do to upgrade my drive? Currently watching a HD DVD is not possible :(
Thx,
Holger

Its not possible to update the firmware on your SD-L802B drive because the firmware released on the Toshiba page was deigned for the TS-L802A drive.
Don't mix these both drives! It's not the same!
I found this website about SD-L802B Super-Multi DVD Writer
http://www.storage.toshiba.eu/index.php?id=3&pid=221
But according to this page the firmware is not available for this driver ( at this time ?:| )

I am unable to update firmware so as to install na...

Hi I live in Barcelona spain and bought a new 5800XM for christmas. As soon as I saw the new free navagator I tried to install, but it says that it needs latest firmware 31.0.008 or onwards, so I duely try to update my phone, I download the nokia software updater, conect my phone and it then tells me:-
Firmware version
Current 25.0.025
Update 25.0.025
Help, how can this be when I see people have v40... What am I doing wrong, I read someones feed saying I must wait wait and wait for my operator to update... Is this true, does this not com from nokia.... Thanks for any insight.

@Chetan - that would be pointless. First of the hard reset you mentioned is impossible on the 5800, as it is a touch screen phone. Second, even if you hard reset it a zillion times and reinstall software updater the same number of times, if the handset's product number is still not supported (due to either branding or regional issues), he will not get the update.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Unable to update iphone via itunes

i have been trying to update my phone via itunes. I keep receiving this error msg "the problem downloading software for iphone. the network connection timed out. I uninstalled itunes and reinstalled them, but I received the same error message. Please assist.

This is asked and answered often. The forum search bar is on the right side of this page.
Try disabling your firewall/security software and try again.

Unable to update firmware on 5230.

hey, I have a nokia 5230 with the current firmware version V10.0.071.
As far as I know, there are 2 ways to update the firmware on this phone: directly from the phone and through ovi suite. Neither of these ways work for me.
firstly on the phone: as far as im aware, there would be an application called SW update in the applications folder on my phone and I could update through that. On my phone there is no such application. When I search for it in help there is an article about it as well as a link to the application but when I try to use the link it says that the application cannot be accessed.
When I try through ovi suite (I tried version 3.0 and the beta version 3.1) I get a problem as well. I use the softwave update feature and it starts, I choose the software and it backs up my phone and downloads the software. Then when it starts installing, it says 15min remaining, and all of a sudden my phone turns off and doesn't turn back on. Then the installation on ovi suite gets interrupted with a "device recovery" error and tells me that "nokia ovi suite lost connection to your device" and gives me some steps to follow. (remove cable, restart device return cable) then click OK to continue but the same thing happens again. I have tried turning of my comp and removing the phone battery as well as restoring factory settings.
The main reason I wanted to update my firmware is because most songs in my playlist don't play but the player just skips them (it gives the info about song length)m there are also exclamation marks next to the song icons (the songs worked before).
This problem seems to have been reset with the factory reset tho however no luck with software.
Sorry for a lot of text.. And if anyone has any ideas please let me know!

The songs with the exclamation marks are corrupted files. You need a new card or something, or at least format the thing. If you would look at your song folder in a PC, you would see that the files of the songs with exclamation marks are missing.
Also, since your memory card is faulty, you should update the device with a formatted card, or the card removed.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Unable to Update System via Airport

Tried to update wife's system 2.4GHz 15" MBP using Airport connection. Airport connection working fine - able to connect and get the list of updates needed. When I hit install the files would download and every single one of them then informed that the file could not install because it had been tampered with or was corrupt. Since two of them were 145MB and 77MB respectively I did not want to go through the lengthy process again. So I retried some of the smaller ones with the same result.
Moved her computer to my office and connected via LAN cable and everything worked like a champ.
Anyone have any ideas? I'm thinking that the long password and encryption(WPA) might be introducing errors although this seems odd.
Thanks,
rhys

I only use Software Update, (which is very touchy as for timing on downloads), to see what is needed, then get them for real via...
http://www.apple.com/support/downloads/
That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.

N73 Failed To Update Firmware Via PC

i've tried using pc to update my n73 firmware but it'll stop updating when it reach 53.3mb. i've been repeating to update dozens of times but it ended with the same problem. can't even find solutions in the internet. any ideas? thank in advance

at last, my n73 was succesfully updated after keep on trying for 8 hrs. thanks

Linksys srw2048 unable to update firmware via xmodem (using hyperterm)

Similar Messages

Maybe you are looking for