Linksys Wireless Network monitor overrides Windows XP Wireless Zero Configuration

Hello all,
I am currently using the wireless router Verizon sent me and it works fine when using the Windows XP Wireless Zero Configuration tool. Previously I was using a Linksys wireless router and I have the Linksys Wireless Network monitor installed. About half the time when starting up the computer, the Linksys monitor starts up and I have to manually switch to the Windows XP Wireless Zero Configuration tool. This is very irritating and I would like to know if there is a way I can remove the Linksys Monitor and still be able to use the Linksys wireless adapter cards installed in the computer.

I think I know.
#1 http://netsquirrel.com/msconfig/msconfig_xp.html
#2 Very carefully, look through the list in MSConfig.
#3 Disable the Linksys Wireless Network monitor.
Restart the computer as need be.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Similar Messages

Linksys Wireless network Monitor vs Windows Zero Configuration Utility

I am unable to conect to the WRT54G v5 router using the Linksys Wireless network Monitor however, when I disable it and use the Windows Zero Configuration The computer immediately connects.
What is going on?
Chuck

Sounds like you are not putting it the correct settings for for the Linksys Monitor. Just use Windows, it works better anyway.

Where is the Linksys Wireless Network Monitor icon?

I was trying to follow some instructions and it said to click on the Linksys Wireless Network Monitor icon on the bottom right of my screen. There are a bunch of icons but none of them are this one or any other Linksys icon. I also searched the harddrive and couldn't find anything. Help!!!

Try uninstalling it and reinstall it back again.
If you're using windows XP, plug in the adapter first and just install the drivers. No need to install the WLAN monitor.

Wireless network monitor says I'm not connected to internet, but I am?

Hi,
I have a WRT54G v6 and a WUSB54GC. I can connect to the inter just fine and for the most part the linksys wireless network monitor says I'm connected to the access point and internet. The problem is occasionally it will says that I'm connected to the access point but the internet when I really am and I can browse the web just fine. I get the not connected to internet msg for a few minutes then it just goes back to connected. Any ideas?

Hi...
I think here the issue may be that the utility and the internet connection are not getting synchronised. The operating system on your computer is it win XP? If it is win xp, u can use the windows wireless software to manage to your wireless network. In order to use the windows wireless zero configuration, right click on the linksys icon at the bottom right hand corner of the task bar, select the option that says "use windows wireless ....".
The linksys icon will be grayed and windows will be managing the wireless network. Connect to your wireless network and you should be able to go online.

Wireless Network monitor cause holes in Desktop

On my computer I have dancers that periodically dance on my desktop. It is live action video as opposed to animated cartoons.
When the Wireless Network monitor is running it cuts a hole in the center of the screen rendering any animated object/person transparent right where the square whole is. BAsically its seems to be cutting a whole through what I guess is a DirectX overlay. Its definately the Wireless monitor as this does not happen when it is NOT running. Anyone else run into this and is there a solution? Ifact it cuts a whole into everything for a moment. I just opened Nero and the square hole was visibly retaining image data of the previous window for just a moment. its just that its easily seen when the screen needs to redraw
WinXP Pro SP2(I dont dare use SP3 as that will render some of my fav stuff useless).
Asus A7V8X-X rev 1.xx
Athlon XP 2600+ 1.9GHz
Nvidia GeForce FX 5200
PCI Bus
Award Bios v6.0
mem:2048

You can install the adapter without the wireless network monitor. Try these steps Uninstall the drivers for the Adapter from start >> All programs ....
>> Insert the Setup CD in the cd drive>> Click on Exit when the
Linksys welcome screen appears>>Click on start. Unplug & replug adapter ...>> There should be a "" Found New Hardware Wizard ""
that pops up on your screen>> Click on “Install software
automatically “, and then click on next. Once the installation is
complete>> Right click on the wireless network connection icon in the
system tray besides the clock >>Click on view wireless networks and
then connect to your network name.

Wireless Network Monitoring System

Hi friends,
I am planning to implement a Wireless network monitoring system as my final year project.
In this project I need to control calls from one mobile to another with the help of JCC or some other technique. Mobiles will be connected to Pc in the following pattern:
Mobile to radio transceiver which will further be connected to pc using RS232 serial port.
This way i will 3 mobiles connected in the similar manner as above.
I just want to know how i can control my calls from these mobiles??
Please guide me, as in how should i start??
Regards
Ron

Have you ever experienced any cross browser issues, when you
really build an app for critical app like this?
not really ... the only crazy thing i have seen is how each
browser uses memory..
you will see higher usage from IE than.. firefox...
IE also has an issue with cache.. so you have to reset your
page at every visit...( i cut that short thinking you understand
what i am talking about)
your biggest issue is the engine and processing of data..
thinks like that.. how you put that together will be HUGE..

HPC8180 Printer wont connect to wireless network, after firmware upgrade to Wireless Router

My HPC8180 has been connecting wirelessly since I bought it sometime ago. I recently had to upgrade the firmware on my Netcom NB9W wireless router and since then my HP wont resolve to the wireless network.
I run the Wireless Network wizzard on the printer, select the correct SSID and enter the WEP key as per instructions.
It then will not connect.
The summary I print out says it passes everything except:
No Filtering = Fail
Connected = Not Run
Signal Strength = Very Low (which is strange because it's about 10ft from Wireless Router).
Other networks detected matching your network name (SSID) = No
Summary says:
Network Name (SSID) altnet (correct)
IP Address = Not applicable
Configuration Source = Not applicable
Communication Mode = Infrastructure
Authentication Type = Open System
Encryption = 64-bit WEP
I have NOT turned on mac address filtering
Any ideas??
This question was solved.
View Solution.

Your router appears to be a DSL modem router. Those can be tricky to connect to. Also, WEP can be problematic and is no longer a good security measure. WEP can be broken in about 10 minutes with freeware from the internet.
Let's do three things:
1. Change to WPA or WPA2 encryption. You can make up your own password. Make it 13 or more characters, numbers and letters, upper and lower case.
2. Reset the Network Defaults in your printer (Setup > Network area).
3. Attach to the router in this way:
Sometimes DSL providers have more control over the router than the printer likes.
- Unplug the telephone line from the router
- Turn the power off on the router, wait 30 seconds, then turn the power back on.
- Go through the normal process of connecting the printer to the device (Wireless Setup WIzard)
- Now find the IP address of the printer (it should be on the self-test printout), type it into a browser.
- On that screen you will find a Networking Tab, then on the left Wireless, then the IPv4 Tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address).
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Leave the gateway and DNS blank
- Finally, plug in the phone line, reboot the router and test.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

UNABLE TO CONNECT TO WIRELESS NETWORK WITH APPLE WINDOWS COMPUTERS CAN

I am new to Apple and am trying to connect to our at home wireless network.Have a Linksys wireless router that is functioning as far as I know correctly.We are able to connect with windows based laptops.My Apple sees our network which is identified correctly and asks for a password.When we enter the password that functions for the other computers it does not work.I s there a configuration change I need to make.Maybe a password variant? I really want to get this up and running and am out of ideas.
INTEL IMAC 20 IN 2.17 GHZ Mac OS X (10.4.7)

Are you using WEP, if you can try and use WPA.
One of the problems with WEP is that the actual standard relies on a 10 character HEX key for 40bit WEP and a 26 character HEX key for 128bit WEP.
In order to make things easier for people, vendors use certain algorithms to convert simple alphanumeric passwords (or passphrases) into HEX keys, thus enabling people to use simple memorable WEP password rather than lengthy HEX keys.
The problem is that different vendors use different algorithms to generate the HEX key and therefore a ASCII password on an AEBS will be hashed differently on a Netgear client and vice versa.
One thing is a 13 character 128 bit WEP password will be hashed by all vendors in the same way (if you use 40bit WEP then a 5 character password is required).
Though sometimes not even that works and the HEX key must be used regardless.
AirPort: Joining an encrypted wireless network
http://docs.info.apple.com/article.html?artnum=106424
Choosing a password for networks that use Wired Equivalent Privacy (WEP)
http://docs.info.apple.com/article.html?artnum=108058
WPA
"WPA Personal" on the Mac corresponds to plain WPA, with a pre-shared key (PSK) and TKIP encryption, on non-Apple wireless routers. The same alphanumeric password should work on both.
iFelix

Internet shuts off after a few minutes requiring wireless network reset on windows 8.1

I recently upgraded from windows eight to windows 8.1 I do not know if this has anything to do with anything I have a 64 bit OS. My Internet goes off by itself every 5 minutes even though my wireless icon at the lower right of the screen still shows connected
I had an error message in the last event in it said that might DHCP settings were out of range. I get my internet at my house through a wireless portable hotspot through my smart phone. But i haven't ever had any problems before and i only have this problem
on this network. If i turn airplane mode on and reset my network card, the internet will come back to life but soon die. i don't experience this problem while on a different network or if i'm on WiFi. This s really annoying please help
IP CONFIGURATION NOV 3
Windows Network Diagnostics Publisher details
Issues found Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding
Detected
Contact your network administrator or Internet service provider (ISP) Completed
Issues found Detection details
 Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding Detected
Contact your network administrator or Internet service provider (ISP) Completed
Windows can't communicate with the device or resource (DNS server). The computer or service you are trying to reach might be temporarily unavailable. If the device or resource is nearby and you have access to it, make sure it is turned on and connected to
the network.
Detection details
Diagnostics Information (Network Adapter) Details about network adapter diagnosis:
Network adapter Wi-Fi driver information:
Description . . . . . . . . . . : Broadcom 802.11n Network Adapter Manufacturer . . . . . . . . . : Broadcom Provider . . . . . . . . . . . : Microsoft Version . . . . . . . . . . . : 6.30.223.102 Inf File Name . . . . . . . . . : C:\WINDOWS\INF\netbc64.inf
Inf File Date . . . . . . . . . : Thursday, August 22, 2013 7:01:07 AM Section Name . . . . . . . . . : BCM43XNG_NT63 Hardware ID . . . . . . . . . . : pci\ven_14e4&dev_4727 Instance Status Flags . . . . . : 0x180200a Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71 Physical Media Type . . . . . . : 9
Diagnostics Information (Wireless Connectivity) Details about wireless connectivity diagnosis:
Information for connection being diagnosed Interface GUID: 0ed45843-c0ab-4a24-b372-c292afdf238a Interface name: Broadcom 802.11n Network Adapter Interface type: Native WiFi
Connection incident diagnosed Auto Configuration ID: 11 Connection ID: 10
Connection status summary Connection started at: 2013-11-03 17:22:59-236 Profile match: Success Pre-Association: Success Association: Success Security and Authentication: Success
List of visible access point(s): 1 item(s) total, 1 item(s) displayed
BSSID BSS Type PHY Signal(dB) Chnl/freq SSID
20-64-32-75-3E-19 Infra -25 6 $@mMÂ¥ Â° Å˜0Â©Å‚<Â¡È›
Connection History
Information for Auto Configuration ID 11
List of visible networks: 1 item(s) total, 1 item(s) displayed BSS Type PHY Security Signal(RSSI) Compatible SSID
Infra Yes 100 Yes $@mMÂ¥ Â° Å˜0Â©Å‚<Â¡È›
List of preferred networks: 25 item(s) Profile: GSIIskyrocket_227 SSID: GSIIskyrocket_227 SSID length: 17 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile:
$@mMÂ¥ Â° Å˜0Â©Å‚<Â¡È› SSID: $@mMÂ¥ Â° Å˜0Â©Å‚<Â¡È› SSID length: 22 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028001 Profile: sam SSID: sam SSID length: 3
Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: $@mM¥ ° Ř0©ł<¡ț SSID: $@mMÂ¥ Â° Å˜0Â©Å‚<Â¡È› SSID length: 22 Connection mode: Infra Security: Yes
Set by group policy: No Connect even if network is not broadcasting: No Connectable: Yes Profile: sammy SSID: sammy SSID length: 6 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No
Reason: 0x00028003 Profile: $@mM¥ ° Ř0©ł<¡ț SSID: $@mMÂ¥ Â° Å˜0Â©Å‚<Â¡È› SSID length: 23 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Plaza_Inn
SSID: Plaza_Inn SSID length: 9 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Plaza Inn AP SSID: Plaza Inn AP SSID length: 12 Connection mode: Infra Security:
No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Cisco33718 SSID: Cisco33718 SSID length: 10 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting:
No Connectable: No Reason: 0x00028003 Profile: Comfort SSID: Comfort SSID length: 7 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Comfort Inn SSID: Comfort
Inn SSID length: 11 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Â«$@mMÂ¥Â»
Â®âˆ…Â¢|<Â£â€ "â„¢ SSID: Â«$@mMÂ¥Â»Â®âˆ…Â¢|<Â£â€ "â„¢ SSID length: 30 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: â€¦$@Mmâ‚¬=Â®0Â¢Â°|<â€¢Â¡+â€¦â„¢
SSID: â€¦$@Mmâ‚¬=Â®0Â¢Â°|<â€¢Â¡+â€¦â„¢ SSID length: 32 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: ApacheCorp SSID: ApacheCorp SSID length:
10 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: SAMMY ROCKiT SSID: SAMMY ROCKiT SSID length: 12 Connection mode: Infra Security: Yes Set by group policy:
No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: S@MMY Â®0Â¢KÂ°itâ€¢T SSID: S@MMY Â®0Â¢KÂ°itâ€¢T SSID length: 20 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting:
No Connectable: No Reason: 0x00028003 Profile: $@mMÂ£ Â®0Â¢|<â€¢Â¡+ SSID: $@mMÂ£ Â®0Â¢|<â€¢Â¡+ SSID length: 20 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason:
0x00028003 Profile: GSIIskyrocket_0079 SSID: GSIIskyrocket_0079 SSID length: 18 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: MARTIN-PC_Network SSID:
MARTIN-PC_Network SSID length: 17 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Sammy Rock'it SSID: Sammy Rock'it SSID length: 13 Connection mode: Infra
Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: GSIIskyrocket_6362 SSID: GSIIskyrocket_6362 SSID length: 18 Connection mode: Infra Security: Yes Set by group policy: No Connect
even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: AndroidHotspot2275 SSID: AndroidHotspot2275 SSID length: 18 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable:
No Reason: 0x00028003 Profile: Sammy Rockitt SSID: Sammy Rockitt SSID length: 13 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: SAMMY ROKiTT SSID: SAMMY
ROKiTT SSID length: 12 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: GSIIskyrocket_2275 SSID: GSIIskyrocket_2275 SSID length: 18 Connection mode: Infra
Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003
Information for Connection ID 10 Connection started at: 2013-11-03 17:22:59-236 Auto Configuration ID: 11 Profile: $@mM¥ ° Ř0©ł<¡ț SSID: $@mMÂ¥ Â° Å˜0Â©Å‚<Â¡È› SSID length: 22 Connection mode: Infra Security: Yes Pre-Association and Association Connectivity
settings provided by hardware manufacturer (IHV): No Security settings provided by hardware manufacturer (IHV): No Profile matches network requirements: Success Pre-association status: Success Association status: Success Last AP: 20-64-32-75-3e-19 Security
and Authentication Configured security type: WPA2-PSK Configured encryption type: CCMP(AES) 802.1X protocol: No Key exchange initiated: Yes Unicast key received: Yes Multicast key received: Yes Number of security packets received: 0 Number of security packets
sent: 0 Security attempt status: Success Connectivity Packet statistics Ndis Rx: 0 Ndis Tx: 0 Unicast decrypt success: 20 Multicast decrypt success: 0 Unicast decrypt failure: 176 Multicast
Diagnostics Information (Wireless Connectivity) Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration Initialize status: Success
Information for connection being diagnosed Interface GUID: 0ed45843-c0ab-4a24-b372-c292afdf238a Interface name: Broadcom 802.11n Network Adapter Interface type: Native WiFi
Result of diagnosis: There may be problem
Diagnostics Information (Wireless Network Adapter) Details about wireless network adapter diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Native WiFi MSM Initialize status: Success
Information for connection being diagnosed Interface GUID: 0ed45843-c0ab-4a24-b372-c292afdf238a Interface name: Broadcom 802.11n Network Adapter Interface type: Native WiFi Profile: $@mM¥ ° Ř0©ł<¡ț SSID: $@mMÂ¥ Â° Å˜0Â©Å‚<Â¡È› SSID length: 22 Connection
mode: Infra Security: Yes Connect even if network is not broadcasting: No
Result of diagnosis: There may be problem
Network Diagnostics Log File Name: 9E4B2429-D02B-4728-B515-A825BD2B29C5.Diagnose.0.etl
Other Networking Configuration and Logs File Name: NetworkConfiguration.cab
Collection information Computer Name: NASTYMCNASTYJR Windows Version: 6.3 Architecture: x64 Time: Sunday, November 3, 2013 5:26:53 PM Publisher details
Windows Network Diagnostics Detects problems with network connectivity. Package Version: 1.0 Publisher: Microsoft Windows
Windows IP Configuration
Host Name . . . . . . . . . . . . : NastyMcnastyJr Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TeamViewer VPN Adapter Physical Address. . . . . . . . . : 00-FF-5D-13-26-21 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration
Enabled . . . . : Yes
Wireless LAN adapter Local Area Connection* 11:
Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter Physical Address. . . . . . . . . : F6-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . :
Yes Autoconfiguration Enabled . . . . : Yes
Wireless LAN adapter SAMMY McNASTY:
Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter Physical Address. . . . . . . . . : F4-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6
Address . . . . . : fe80::3107:66bc:cf1f:c776%4(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.43.3(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Friday, November 1, 2013 9:50:20 PM Lease Expires .
. . . . . . . . . : Saturday, November 2, 2013 12:56:46 AM Default Gateway . . . . . . . . . : 192.168.43.1 DHCP Server . . . . . . . . . . . : 192.168.43.1 DHCPv6 IAID . . . . . . . . . . . : 83146722 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-F1-98-B4-20-89-84-84-61-BB
DNS Servers . . . . . . . . . . . : 192.168.43.1 NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Ethernet:
Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : 20-89-84-84-61-BB DHCP Enabled. . . . . . . . . . . :
Yes Autoconfiguration Enabled . . . . : Yes
Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/26/2013 7:52:23 PM Event ID: 20003 Task Category: (7005) Level: Information Keywords:
User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management has concluded the process to add Service vwifibus for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0.
Event Xml: 20003 0 4 7005 0 0x8000000000000000 5118 System NastyMcnastyJr vwifibus \SystemRoot\system32\DRIVERS\vwifibus.sys PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 false true 0 Log Name: System Source: Microsoft-Windows-UserPnp
Date: 10/19/2013 3:29:12 PM Event ID: 20001 Task Category: (7005) Level: Information Keywords:
User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management concluded the process to install driver netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1
with the following status: 0x0. Event Xml: 20001 0 4 7005 0 0x8000000000000000 2015 System NastyMcnastyJr netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf 6.30.223.102 Microsoft PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1
{4D36E972-E325-11CE-BFC1-08002BE10318} false false false 0x0 Broadcom 802.11n Network Adapter Log Name: System Source: Microsoft-Windows-DNS-Client Date: 11/2/2013 12:24:59 AM Event ID: 1014 Task Category: (1014) Level: Warning Keywords: (268435456) User:
NETWORK SERVICE Computer: NastyMcnastyJr Description: Name resolution for the name www.google.com timed out after none of the configured DNS servers responded. Event Xml: 1014 0 3 1014 0 0x4000000010000000 34771 System NastyMcnastyJr www.google.com 128 02000000C0A82B01000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

Hi,
You can refer to this blog, and try to roll back to the older version of network adapter driver to check the results.
Windows 8.1 Wifi showing "limited" or "No Internet Access"
http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
Meanwhile, please check with the manufacturer of your router to update the firmware.
If the issue persists, please help to collect following information for further research:
Over an Administrative command prompt.
C:\> netsh ras set tracing * enabled
Over an Administrative command prompt.
C:\> netsh trace start scenario=netconnection capture=yes tracefile=c:\net.etl
Over an Administrative command prompt.
C:\> netsh ras set tracing * disabled
Over an Administrative command prompt.
C:\> netsh trace stop
From the Client:
b) C:\Net.etl and C:\Net.cab
Upload these files in SkyDrive and post back the shared link.
Keep post.
Kate Li
TechNet Community Support

Hp v40 on xp desktop and is shared via wireless network. laptop with windows 7 wont print on v40.

Can't print from laptop (windows 7) via wireless router .to desktop (windows xp) with usb attached HP v40 all in one.
Laptop (7) ----- wireless router ----- desktop (xp) - -usb-- HPv40
Worked when laptop was running xp.
Laptop spools print job to desktop and seemingly completes, but the desktop simply ignores the print job.
No error messages.
printing from the desktop work just fine.
This question was solved.
View Solution.

I am reporting this as solved. I submitted this problem. The problem started when updated my laptop from Windows XP to Windows 7. When I did, The Lexmark printer on my desktop worked find with the new laptop system. The HP V40 did not work. The Desktop simply received each print job submitted from the Laptop (via a wireless local network) and discarded it. I could see the print job come into the V40 print queue and could see it disappear.
Here is what I did to solve the problem:
I tried a dozen or so combinations of removing and installing the printer on both my Windows 7 laptop and my Windowx XP desktop (with the V40 attached via USB), and manually removing and installing print drivers on my desktop PC, it finally works. What did I do? I have no idea, but I believe that manually removing the v40 drivers on the desktop was part of the solution. While viewing the available printers on my XP desktop, I clicked on File and one of the tabs led me to a place where I could remove drivers for each printer ( I just removed the ones for the V40).
Here is what I DID NOT DO:
I did not follow the advice of the HP support person that I contacted via the telephone. That advice was to reinstall Windows XP on my desktop. That clearly was not the problem when I spoke to him. But he would NOT listen to reason. Thankfully, I have enough PC knowledge to know that his advice bas bogus
I am pleased with the resulting availablilty of the V40 again.
I have no idea how to officially close this problem.
I would be happy to discuss this with anyone else who has a similar problem, but when I submitted this problem with my name and email address, the moderator removed my problem submission. Hence, I think anyone who wants to know more is out of luck.

Why the word "secured" is not shown on my wireless network SSID in windows 7 ?

hi friends
i have a windows 7 installed on my laptop. i newly have deployed a Dlink access point. i have setup WPA/WPA2 PSK for authentication.
when i click on wireless network list on the right button of the taskbar, system shows my SSID but it hasn't the orange exclamation mark which states "secured".
what should i do so that the word "secured" appear there?
thanks in advance

It would be better to check settings in the Dlink access point.
If there is an orange bubble or an exclamation mark it tells that your network is open or unsecured.
Maybe, the settings are okay in the Dlink access point if there aren't any bubbles.
hi . thank you very much.
yes you are right, my question is wrong.
when there
is not an orange bubble or an exclamation mark, it tells that network is secured. so every thing is ok

E-4200 - Wireless Network Monitoring

It used to be that monitoring the family computer through software was fairly easy, but these days my kids use Ipods, laptops, the Wii, or the PS3 to access the internet over our wireless network (using the e-4200).
Has anyone found a good software for monitoring what the heck our kids are doing while their using those devices? I tried Network Spy from Mingsoft, but it's a joke and doesn't work right. BIG waste of money (I'm still working on that refund).
I don't think Network Magic will do everything I want, nor will Home Defender. I want to be able to see what their accessing on the internet, but also have blocking features depending on the age of the child.

Sounds like you need openDNS...
http://www.opendns.com/

Msi star key 2.0 3x faster wireless network adapter with windows 7

Hi,
I have msi star key 2.0 3x faster wireless network adapter product. Could anyone please provide me information whether it is compatible with both 32-bit and 64-bit Windows 7 operating system? Thanks in advance.

Quote from: tempaccount1234 on 05-April-11, 19:27:06
Could anyone please provide specific information? Will the Vista drivers work for Windows 7. I am not able to use them. Is there any setting required? Please help......
No Vista drivers often do not work in W7.
You better buy a new device that has W7 drivers.

Wireless network report says that the wireless radio is not fuctioning

I have a C309a HP printer. When I updated my laptop from Vista to windows 7 and try to connect to the wireless printer, it will not connect wirelessly. When I print the Wireless network Test Report the report says that the Wireless radio in the printer is not functioning. Do I need to buy another printer???? I have gone into the wireless radio selection and made sure that it is set to on.

Hello Jawhited,
It might be possible that the printer is not able to initialize the printers wifi adapter. There are a few steps that I would try before looking for a other printer. One of them is contacting your local HP support. Often with a reset, they might be able to to re-initialize the printer in a attempt that it would re-enable the printers wifi card.
What could also help, is making sure that Bluetooth is disabled, or first disabling every communication option and then re-enable the wifi radio only. Though as I said before, make sure to contact you local support for any further options they might have.
Kind regards,
van Baardewijk

My wireless network test report indicates "The wireless radio is not functioning. Contact HP support

HP Photosmart Premium All-in-One, Model # C309a...Windows 7, 32-bit. A Wireless Network Test Report tell me "The wireless radio is not functioning. Contact HP Support***
***-Critical: action required
Naturally my printer is out of warranty. Has anyone had experience with this problem. If so, how did you resolve it?

Is the error message from a diagnostic running on the computer or from the front panel of the c309a? The page here may help.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Linksys Wireless Network monitor overrides Windows XP Wireless Zero Configuration

Similar Messages

Maybe you are looking for