Linksys WRT110 firmware problem

I have been trying to update the firmware on this think for ages. I bought the router because I had problems with other brands and heard this was the best brand for gaming. With all the complaints lately I think this sentiment has changed dramatically over the past couple of years. I have had problems with this router turning of UpNp for no reason, so I thought maybe updating the firmware might fix it, but it won't even let me do that...
It just keeps saying please designate path of update even though I picked it a hundred times.

I understand you're having difficulty upgrading your router's firmware. I have encountered the same problem when I was using Firefox to download the firmware. But the upgrade was done successfully using Internet Explorer. Follow this link to learn more about udating the router's firmware.

Similar Messages

My switch Linksys srw224g4 has problem and I need someone help

Hello,
My switch Linksys srw224g4 has problem that it keeps rebooting continuously and cannot bootup successfuly. Can someone tell me how to fix this problem? Firmware version is 1.2.2b , boot version is 1.0.2
Here is console capture:
==================
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.2 Built 17-Aug-2006 14:55:46
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from flash
100%
OK
Running from RAM...
*** Running SW Ver. 1.2.2b Date 20-Mar-2007 Time 11:44:49 ***
HW version is 00.03.00
Base Mac address is: 00:1d:7e:74:b6:14
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:02 %CDB-I-LOADCONFIG: Loading startup configuration.
LZMA: Decompressing file failed!
HOSTG_rscode_file_load: could not load file
Device configuration:
Slot 1 - SRW24F4G HW Rev. 0.2
Tapi Version: v1.3.3.1
Core Version: v1.3.3.1
01-Jan-2000 01:01:09 %SYSLOG-F-OSFATAL:
L FATAL ERROR: ROOT: ABORT DATA exception
***** FATAL ERROR *****
SW Version : 1.2.2.16
Version Date: 20-Mar-2007
Version Time: 11:44:49
Instruction 0x121fc0
Exception vector 0x10
Program state register 0x20000013
***************** SYSTEM RESET *****************
------ Performing the Power-On Self Test (POST) ------
UART Channel Loopback Test........................PASS
Testing the System SDRAM..........................PASS
Boot1 Checksum Test...............................PASS
Boot2 Checksum Test...............................PASS
Flash Image Validation Test.......................PASS
BOOT Software Version 1.0.2 Built 17-Aug-2006 14:55:46
Linksys SmartSwitch based on 88E6218 with ARM946E-S.
32MByte SDRAM. I-Cache 8 KB. D-Cache 8 KB. Cache Enabled.
Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
Preparing to decompress...
100%
Decompressing SW from flash
100%
OK
Running from RAM...
*** Running SW Ver. 1.2.2b Date 20-Mar-2007 Time 11:44:49 ***
HW version is 00.03.00
Base Mac address is: 00:1d:7e:74:b6:14
Dram size is : 32M bytes
Dram first block size is : 16969K bytes
Dram first PTR is : 0xF6D840
Flash size is: 8M
01-Jan-2000 01:01:02 %CDB-I-LOADCONFIG: Loading startup configuration.
LZMA: Decompressing file failed!
HOSTG_rscode_file_load: could not load file
DelScr fatal Error: Invalid Variant type01-Jan-2000 01:01:03 %SYSLOG-F-OSFATAL: DelScr fatal Error
***** FATAL ERROR *****
Reporting Task: ROOT.
Software Version: 1.2.2b (date 20-Mar-2007 time 11:44:49)
***************** SYSTEM RESET *****************
Thanks,
Tien

Hi,
Please follow the steps in this link to reload the image:
http://www.cisco.com/en/US/products/ps9967/products_qanda_item09186a0080a36371.shtml
And this is the link to download boot code 1.00.86:
http://ip.gliebetronics.com:800/firmware/Linksys%20SRW2024/Firmware/
Hope this help.

Connecting to a Linksys WRT110

I just purchased a Mac Book Pro running Mac OS X 10.6 and am trying to connect it to my wireless network. I have a Linksys WRT110 router with version 1.0.03 firmware running WPA2 Personal TKIP or AES encryption. When trying to connect from my Mac, I get an "Invalid Password" error. I've entered and re-entered the password several times to no avail. Any ideas?
Thanks

Thanks Sig..wish I could say that solved it, but I'm still getting the "Invalid Password" error. I'm using a 63 character ASCII password with WPA2 personal. I saw some info in other posts about using the $ sign for hex passwords with WEP and enclosing ASCII passwords in quotes for WEP as well. I tried the quotes with my WPA2 password and it would not even let me save the password.
Any other thoughts?
Thanks

Unable to connect to home network using a Linksys WRT110 router

I recently had to upgrade from a Linksys G router to a new router--the Linksys WRT110. I was able to connect to the WiFi using my Palm TX prior to doing a firmware update to the Linksys WRT110. Now, my Palm TX doesn't even recognize that there is a network. I put the network name in manually and it still won't connect. I don't know what else to do! Incidentally, my home computer and my laptop connect to the router wirelessly just fine. I appreciate any help that i can get to enable me to use my WiFi on my Palm TX at home.
Thanks.
Post relates to: Palm TX

Please read through the Wifi Checklist at the top of this section for some hints.
WyreNut
Post relates to: Centro (AT&T)
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Zoom X5 GS Ver 2.1.0 & linksys WRT110

All I want to do is hook up a wireless access piont, but no matter how I seem to hook it up, the WRT can't find my zoom ...... getting ready to chuck both out the window and just watch tv.. I've just toasted away 6 hrs, The zoom is hooked to verizon, using a network ID of 10.0.0.2 and works just fine, I can plug in my pc to any port and works great, I can post my settings page on here..............
LAN Configuration System Mode:   Routing Get LAN Address:   Manual
External DHCP Server
Internal DHCP Server
Actual LAN IP Address:   10.0.0.2 Actual LAN Network Mask:   255.255.255.0 Conf. LAN IP Address:       Conf. LAN Network Mask:       Speed:   100BT Duplex:   Full IGMP:   Enable
Disable
MTU:
its also set to dhcp server, again, I just want to add the linksys as a WAP, but I can't get it to connect to the zoom, anyone got a suggestion? I hate networking.....never learned enough about it to do it right. Let me know if you need any other shots or info from the set up screens. thanx

the wireless is a wrt110, I had to totally unload all software and reload everything and then it picked the linksys up, so problem has been solved thanx anyway

Linksys wifi connection problem

I have a strange issue here. I cannot connect to any OPEN linksys wifi router. If the router useses WPA or WPA2 I can connect without prboblem. I've tried it with my home linksys router and I get the same results. I used to be able to connect to any OPEN linksys wifi without problem. It suddenly stop working and now I am not able to connect to any linksys OPEN wifi anymore. Other branded OPEN wifi connections (no problem)
Is there any "*.plist" file(s) that I can delete and reset the airport back to default ? This happen before the 10.4.8 update. Even after the 10.4.8 update, I still having the same problem.

What is the Model no of the Router ?
Are you able to go online with another wireless computer ?
Try to lower down the security to WPA or WEP then,try to connect the wireless network.If still doesn't work then,upgrade the router's firmware and reconfigure it...

Zen Vision:M - firmware problem

Hello!
I'm having some trouble with my Zen Vison:M 30 GB (I'm using Windows Vista 32-bit with SP2). After resetting the player I got the message "Firmware problem". The player displays this message until the battery is empty and if I reset the player once again it takes approximately 5 minutes "rebuilding libraries"(at least that's what I think it's called in English)?and then the "Firmware problem" is back.
Well, then I downloaded the MP3 recovery tool from Creative. After recharging the battery the recovery tool recognizes my Zen, downloads the firmware and... tells me that the player is not longer connected (it is actually).
Does anyone know how I can update my firmware or reboot the player? Any help would?be appreciated!!
Greeting from Anders Hansen, Denmark
Message Edited by andersryom on 07-7-2009 2:37 PM

It would be best to update the firmware on the XP computer. If you have WMP on the Xp computer you will need to rollack to WMP0 for the firmware file to see the player & update it.http://www.microsoft.com/windows/win...ionofthePlayer Emailing Creative will? tell you to come here & you already are hereMessage Edited by coachop94 on 07-20-2009 03:29 AM

Zen Vision M Firmware Problem!!! Can't deal with this thing any more...

Can't deal with this thing any more...3 Hello friends I'm new in the forum
Well as the title mentions, I'm about to throw this thing oute of the window!!!
It's a 30 GB Zen Vision M, I own it ,5 years now...
I have read all the relevant posts in the forum about this player, I tried my best, nothing really worked.....
So now I have a Zen which only boots in the recovery mode!!
I have Cleaned it Up, Formated it, and tried to reload its firmware BUT when I connect it and try to reload it, in the end it always says Firmware Upgrade Failed!!Really can't understand it!!!!!
I've communicated with Creative, i wasn't at all satisfied with their responses... I think what they're trying to do is to avoid me, and earn some time with really useless suggestions which I had already told them won't work!!!So in the end they wanted me to send my Zen in Italy and pay more than 100 Euros for what an ,5 year old mp3 player?No I prefer buying a new Cowon with that amount of money!!!
Anyways I'm pretty mad now, so I'll move to the subject..
I have Service Pack 3 Windows XP in my computer, and I did roll back on the Media Player 0 from the I had, using the instructions from a previous post. The truth is that it rolled back with less steps than it showed, and I say that because it mentions in a step that in the add-remove programms, in the Windows XP-Software Updates section, I should find a Windows Media player thing which really doesnt exist and I suspect it's the Service Pack 3 because I have done the same in a SP2 and worked exactly as the steps said..Anyway the fact is I have Windows Media Player 0 now!!!
Please someone tell why can't I upgrade my firmware... I can't deal with this anymore!!!!

KRe: Zen Vision M Firmware Problem!!! Can't deal with this thing any more..._
menios wrote:
So you say that I actually have the Windows Media Player 0, because my Zen is being recognised..
I have rebooted it several times but its just the same thing...it shows firmware problem!!
Why isn't this player working?I've seen many people, not only from here, who have the same exact problem and they gave up on their mp3... I dont have this kind of luxury to buy a new one!!I don't know whether Creative has put on this a "time bomb" or is just faulty, but I really wish it could be saved..
I'm saying it is WMP0 because the firmware file sees the player. The computer can recognize it but with WMP components that firmware file would be grayed-out..So when you reloaded the firmware did you choose "reload firmware" Before you connected it's?(That is what erases the firmware prior to uploading the firmware. If you did not do that it could cause it to fail.Do these ste
ps.
Open the firmware file,On the player format>cleanup>choose reload firmware, then connect & run the firmware file.

Zen Vision 30GB Firmware Problem - No solution wo

I have a Zen Vision 30GB (not a Zen Vision M or W, just a Zen Vision). On Friday I was trying to add songs to my Zen and halfway through adding the songs I got an error on the computer saying "player not connected". So I undocked the player, turned it off and reset my computer. Saturday morning I turned on my Zen to try to add songs again and I got the error message on my Zen?"Firmware Problem" and it put me in "Recovery Mode". The first thing I did was try to reload the firmware, but when I plugged the Zen to the computer it says "docked", but I cannot move through the menu. When I unhook it from the computer I can move through the menu. BTW I am running Windows Vista 32-bit. I have uninstalled the Zen software and installed the software off the Creative website for Vista, but when I try to run the firmware it says "Player not connected, please connect player."? When I plug the player in via USB my computer recognizes it and prompts me if I want to sync my player, so there isn't anything wrong with my USB connection. The?Device Manager recognizes it however Windows Media Player does not. I get the same error message when I try to do the Recovery Tool on the Creative website. I have looked for solutions on the forums and just doing Google searches, but I have not been able to get anything to work. Please help me!? The player is less than a year old. I have never had any problems with it before, never been dropped or anything like that, so i am not sure what is going on. Any help or suggestions would be great!? I sent an email to customer support yesterday and the reply I received this morning was no help. First they thought I had the Zen Vision M, even though I specifically said I had the Zen Vision and gave them the serial number and everything. I sent them back a message today and hopefully they can help, but it is frustrating having to send an email and wait around for a reply.

Re: Zen Vision 30GB Firmware Problem - No solution works\ I recently had this problem with a player i got off Ebay. What I did was format>cleanup>reboot the device thru the recovery screen on the the player. Problem solved . Be advised this will erase all the files (music ect.) http://forums.creative.com/creativel...ap&thread.id=3
Dragonboy wrote:
I seem to have a very similar problem as you. I have a zen vision m (30g) and i also use vista. I am getting the message "firmware problem" after is tries to "rebuild". I need some major help. I ended up giving up a while ago and bought a microsoft zune. It is not as good and i miss my zen. If anyone can give me some info it would be much appreciated.

Firmware problem with zen ex

Can anyone help me with this issue. I get the message firmware problem after I turn my player on and it tries to rebuild the libraries. I have tried to update the OS in the hope this would fix it but I got the same error. As you may have guessed I am new to this and have only had the player for month.
Many thanks

See here in the Zen FAQ at Nomadness.net.

Linksys WRT110 Wireless Router

I need to setup my Linksys WRT110 wireless router for wireless use as well as a router between my cable modem and my desktop PC. So far, I cannot find any documentation on how this is done or if it is possible at all. When I called Linksys support they told me it can be done and provided me with a link to the instructions, however, they did not work. Does anyone know if this is possible? I need to setup in order to work from home and I cannot use a wireless connection to my cable modem but I need a router between my desktop PC and my cable modem. Oh, by the way, I have a new HP desktop which is running Windows 7. I would appreciate any help someone can lend me. Thank you. SHH

From what i read on your post looks like your trying to use your wrt110 as a wireless access point and you want to still use your router near your modem.
To do this what you have to do is disable your wrt110 as a dhcp server since your other router near your is acting as the dhcp server.
So what you do is hook a cable to your wrt110 in port 1. type in 192.168.1.1 in the address bar of your internet explorer.For now this 192.168.1.1 number will get you into the wrt110 until you change it to 192.168.1.5 under setup you will see 2 areas. Under the ip address type in 192.168.1.5 so this make your wrt110 have this ip address.
Below that you will see DHCP server setting disable this. So your wrt110 will not act as the dhcp server it will act as a wireless access point.
Now if you type 192.168.1.1 in your web brower that will open the configuration screen of the router next to your modem. Which that dchp server setting will be enabled.
So basically from your modem your first router will route the signal from the modem thru the router to the computers hooked to it. then say you run a cable from that router to the wrt110.So basically your just uplinking to the wrt110. only thing is your wrt110 will have to act as a access point instead of a router.
Your main router configuration screen to get into it. you would type 192.168.1.1 in your brower after you setup your wrt110 an disable the dhcp server and set the ip to 192.168.1.5 when you type this number the 105 number in your browser it will go into the web config screen of the wrt110
So to access the web config screens of both routers they will have different numbers.
1st router by your modem will be 192.168.1.1
2nd wirless one will be 192.168.1.5 which you changed when you when in and disable it as a dhcp server since your 1st router by your modem acts as the dhcp server.
Hopefully this will help. I know it does get a little confusing been there and done that more then once. If not call linksys on the phone tell them what products you have and how you want it to work they will walk you thru it.
My setup in my home from my modem it connects to a 4 port router, then from there to a 24 port switch then uplinks with a Power over Ethernet adapter which sends power thru this little adapter over the brown pair in the cable so you dont need a electrical outlet where you put your wireless access point/router. Then from my switch it uplinks with that POE to a Wrt110 upstairs in my home. I know what a pain this can be i've call them more then once to get mine setup and working.
GOOD LUCK HOPE THIS HELPS

20GB ZEN firmware problem! pls help me someone...

hi there my 20GB zen is saying it has a firmware problem... i have tried to fix it by reloading the firmware again but it is not even recognising that it is connected... i am not that good with computers so if anyone has any suggestions i would really appreciate it as i am DESPERATE!! cheers

your only options are:
1. try another decompiler.
2. decompile manually (and that's too advanced to discuss in a forum). but you might find help using google.

Firmware problem, Zen to

I tried to upgrade my Zen touch to the playforsure firmware, but it didn't take it, now I have a "firmware problem" message that doesn't go away, I did a cleanup, format with no luck, it only boots into recovery mode and if I try to flash it again I get a message that the player is not connected to the PC.
Is there any way to fix it's or is it the end of it's
Any help is greatly appreciated, I love my Zen Touch, especially the battery life
Thnaks in advance and happy new year!!
Erik

Hi there, I have the same Problem. Tried to update to firmware 2..0, followed the Instructions but then the Player was no more detected via usb, the update failed during the process "your player is beeing reeboted, please wait...", but nothing happened! When I tried do reconnect it in the recovery mode, my Computer didn't detect the player, the flash-tool said "player is not connectet, please connect the player"
Same problem on another system! Both System with XP-pro SP2. What can I do? What "drivers" do I need? Please help me!
Thanks!
Gero

*URGENT* Firmware Problem On Zen To

Hey,
Ok so i was updating my firmware using the latest
and legit download from your website when an
error occured.
Now whenever i boot up my ZEN TOUCH i
get "Firmware Problem" and it goes into recovery
mode. I have tried updating on 2 different
computers and i have done it with the AC plug in
but still nothing works. The error i get when i
try to update is that (even though the computer
recognises the zen) the update firmware
application does not recognise and asks for it to
be plugged in (also nomad explorer does not
recognise it)
Please can you guys help?
Drakhra
I have also tried reverting to wmp0 but still on both computers no resultMessage Edited by Drakhra on 0-5-2006 03:32 PM

Interesting... I burnt all the necessary software to a CD (which included: JB3MV2_PCWDRV_US__30_03.exe [Creative Zen Touch Drivers], ZenTouch_PCFW_L4__0_03.exe [Old Firmware update], and ZenTouchP4S_PCFW_LB_2__0.exe [Latest Firmware update]). loaded the CD onto a laptop. Installed JB3MV2_PCWDRV_US__30_03.exe which are the drivers for my creative zen touch. With my Creative Zen Touch plugged in via USB port. it asked me to reconnect the device. I reconnected it. I attempted to install Firmware: ZenTouch_PCFW_L4__0_03 it gave me the same error before. Then I double clicked firmware ZenTouchP4S_PCFW_LB_2__0.exe and it recognized my Creative zen and is currently updating the firmware. Suggestion:if you have all these files on the computers try uninstalling and then reinstalling. Might be a trial by error thing. Hopefully this hel
ps.
-Regen

I need help , 8GB ZEN has 'Firmware Problem' mess

Hi there I'm from Singapore & I bought a 8GB ZEN from West Mall's Harvey Norman last Oct .
Eariler on , I realised that my ZEN has a 'Firmware Problem' message displayed on the screen . I try as might to reset the player countless times but no matter what , the message still appears & to make things worst I tried to call the customer/techincal support hotlines but they're closed for the day :S
I don't know what happened , it was still working fine this morning when I brought it to Uni . Does anyone know how to solve this problem ?
Thanks
Karen

If you get the firmware error, you can go into the Recovery mode by holding down the Play/Pause button while turning on the unit. Then do a 'Reload Firmware'. This will clear the firmware. Download and run the Firmware update from the Creative website for the Zen. This should reaload the firmware with the latest version.
If that fails, just bring the Zen and the receipt down to the Creative service centre and they will take care of it.

Linksys WRT110 firmware problem

Similar Messages

Maybe you are looking for