Linksys WRT120N Keeps disconnecting

Greetings everyone!
Well, my problem is that my Cisco Linksys WRT120N router keeps disconnecting, my family and me are all using the wireless connection. But sometimes the router just disconnect us all, its like its restarting, it only close down for like 5 - 10 secounds and then its back on. Sometimes it does it like every secound hour and sometimes it does it 3 times in 10 min. I usually play games on it and even tho I am the only one using it, it still disconnects. 
We got 2 wireless cameras running on a secound router that is merged (Thats what the nerd that setted it up for us told me) with the primary existing router. I am not really that good at computer I just dont want to get disconnected all the time. 
Have a really good weekend and take care!
//Rasm8715.
Solved!
Go to Solution.

Hi there,
If this is true on both wired and wireless connection, isolate the concern by connecting your computer to the modem directly. Observe the connection while connected to the modem. If the connection is unstable behind the modem, you need to contact your ISP (Internet Service Provider) to fix the issue. If the connection is fine on the modem, reset and reconfigure the router. If the problem is present only on the wireless connection, you can reconfigure the wireless settings. Change the channel width to 20 MHz only and select channel 1, 6 or 11 to avoid wireless interference. Also make sure the router is on a higher and open location. By the way, it would help if the router’s firmware is up to date.

Similar Messages

  • Linksys WRT110 keeps disconnecting

    I have a Linksys WRT110 and it worked fine for about the first year or so, but recently it has been intermittenly droping the signal to the point of no connection at all. Is there an update or anything I can do about this? I contacted tech support, and conveniently since my warranty is up I have to pay for their help with this...
    (Mod note: Off topic remarks removed. Thanks!)

    It would drop it when I was using my iPhone and when my wife used her laptop. It was very intermittent and never stayed offline for the same amount of time. Sometimes it would be less than a minute, sometimes more. Occasionally I had to turn wifi off on my phone, then turn it back on just to get the wifi going again.
    It was dropping the wired connection a few months back, but it got solved on here. Had to to a complete reset.

  • Linksys AC1900 Smart Wi-Fi keep Disconnecting?

    Hi There,
    I've installed 2 Linksys Routers AC1900 and E1200, my Local Network is running on AC1900 at least 50-75 devices connected on the same time.
    I've checked the Modem (Internet Connection 24 Mbps Dedicated Fiber) and is working fine, but the router AC1900 keep disconnecting from the Internet and due to that my users suffer.
    I've checked all the circumstances of failure but no luck. Please guide me.
    The following services are disabled on the router:
    Guest Access
    Parental Controls
    Media Prioritization
    Wi-Fi Protected Setup (Previously it was ON, but the problem exsits.)
    Mac Filtering
    DMZ
    DDNS
    Firewall is enabled, with default rules.
    NOTE: I've 2 separate intenert connections (24 Mbps) for both of the routers.
    Thanx in Advance
    Solved!
    Go to Solution.

    for both of you, what version is your hardware and what version is your firmware? if they are hardware ver 1.0 then make sure you are running the old firmware version which ends in 156465 and not the version that is 158863. that version is only for the hardware version 1.1. you can get 1.0 version from the linksys web page but be sure to select hw 1.0 in order to see it. once you download it install it from the browser page and your dropouts should get better
    you might also want to disable the Cut Through Forwarding on the connectivity page under the admin tab and see if that helps. Please post back and let me know. I am talking to their dev guys about this issue

  • How to connect linksys wrt120n with ubee modem+router on twc.

    Hi,
    I have a twc connection with a ubee modem+router, it keeps on dropping connection all the time, i googled about it and came to know that if we just use the ubee device as a modem and install our own router along with it, it works fine. I have a linksys wrt120n and i tried installing it but it is not working, the internet is not working. When i try to do it with the CD, it hangs up in between and i tried manually but i am missing something in the settings may be. 
    Help anyone? 
    Mukul 

    If you ubee modem router is set to bridge mode then there will be no wifi signal.  If you still have a wifi signal, you need to call your ISP and have them verify it is in bridge mode.

  • My Xbox 360 keeps disconnecting for no apparent reason

    I have a linksys WRT120N, and comcast internet. It worked fine for about a month or so, and now over the last 4 days, i'll get booted from Xbox Live for no reason at all every 10-20 minutes, without any lag. One moment the game is running fine and the next i'm disconnected.
    I have the 360 wired to the modem, as well as my desktop. the desktop doesn't have any disconnect issues at all, and i can immediately resign in to XBox Live. i've done the port forwarding, updated my firmware, my NAT is open and checked my MTU, and none of it helps. XBL works perfectly if i have it plugged directly into my modem.
    please help, this is driving me crazy!

    Whats the MTU size you have setup on your Router? The MTU size on your Router should be set to 1365. Since you have updated the firmware on your Router, have you resetted your Modem and re-configured all the settings on it again? If not then, Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

  • Ichat keeps disconnecting my AIM

    i recently changed my router from belkin to my old wired linksys because the belkin broke. ive bee having problems even before i had this linksys, but the problem continues...
    ichat keeps disconnecting my aim account without any notice. so while it shows that i am available on my end, no body can see me on their buddy list.
    my router details are below. i have tried using port 443 and the default for aim, neither works. any suggestions?

    Try iChat without the SSL Login option
    8:26 PM Saturday; July 4, 2009

  • Wrt54g keeps disconnecting

    hi, i have a pc connected OS: win xp sp 2. connected wired to the router wrt54g v7 the other computer is a laptop connected wirelessly to the router the router keep disconnecting the pc and the laptop at random time. Can anyone help me with this problem. thanks regards, bongel

    Access routers setup page using http://192.168.1.1  ... you will see username & password ......
    Leave username blank & in password use admin ......
    Click on "Status" tab ...... it will show firmware version of the router ....
    Check the latest firmware from http://www.linksys.com/download .....
    After reset .... reconfigure the router ....

  • WRT310n keeps disconnecting using PPoE

    About 3 months ago I purchased a brand new Linksys wrt310n, set it all up and working find on DSL using PPoE. I upgraded the firmware to latest version more than a month ago, the router is being working fine all along. All of the sudden, one Sunday afternoon the router keeps on connecting to my ISP with the same PPoE settings I had there originally, then I get 2 type of issues, sometimes the router will come back and say it cannot get an IP Address, but most times it will try to authenticate using its PPoE settings, then it gets connected, stays connected for about 5 minutes and during those 5 minutes when I browse the web, the responses are very very very slow and pages don't display, eventually the connection disconnects and keeps retying, the PPoE settings keeps disconnecting. I called my ISP and their end works fine, when I connect a computer directly to the DSL modem and setup the same PPoE settings, the computer works fine and I can browse. Can someone please tell me what's going on with my router? Also if someone out there knows, what's the warranty on these devices? Remember this device is only 3 months old, I understand chances of breaking and all of that as technology is like that, but really how robust are these devices? Anyway back to my issue, can you help?

    Make sure that the "Keep Alive" option is checked on the setup page of the router....Also,as you upgraded the router's firmware,I would suggest you to reset the router for 30-35 seconds,power cycle it and re-configure the router from scratch.

  • Wireless router keeps disconnecting...

    Hello there,
    I own a Linksys Wireless Router (BERW11S4). I recently updated it's firmware to the latest version (1.52.02) which supports WPA-PSK (TKIP).
    I have set the group renewal interval of 7200 seconds, which is the max the software will accept.
    My problem is after a certain period, it keeps disconnecting, which i believe is because of the group renewal interval, which can't be turned off. How do I eliminate this problem as it is really annoying to keep re-connecting half-way everytime?
    Thanks in advance.

    still disconnecting every hour and then...
    please help. im so frustrated.
    any other settings i should try?
    or solution?
    help me out 300N users!

  • I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    Hello AKCamus
    To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • USB device keeps disconnecting/connecting after upgrading to Windows 8.1

    I have a device(Pedal for Sim Racing) connected via USB, everything is working fine in Windows 7 and 8 but after upgrading my machine to Windows 8.1 the device keeps disconnecting and connecting for like every 2 seconds. But after I open the Property Sheet
    in Game Controllers panel the disconnection issue was gone, if I reconnect the device the issue persist. Other people who have similar device also encounters the same issue after upgrading to windows 8.1. The issue persist with or without the device driver
    installed. 
    Any idea, what might cause this? 
    Best regards
    mark

    I'v got this exact same problem with my Win 7 desktop.  I've also got pedals and wheel but don't see it as different than all the other USB devices.  I'm using a bunch of USB, but no hubs, including 3 external storage hard drives. But the momentary
    disconnect appears in all devices as best as i can see..even my long time trouble free head phones..keyboard..and all.  Sometimes the sound goes away and if I unplug and replug them the sound comes back, and other times I have to exit and re enter the
    game. I also get video crashes ..maybe not related.IDK..and have to restart all, because I've got three black screens in Eyefinity. For years my system was trouble free and its just slowly started getting worse. I've thought it had to do with system "sleep"
    etc but long ago went to never sleep max performance etc..Makes no difference. Keep thinking its my hardware or my house wiring etc..But can't seem to solve it. I replaced my Mobo/chip/ram maybe 6 months ago and that appears to have not helped.  It seems
    to be getting worse. I hate to start replacing parts piece by piece..cost a lot of money and sometimes doesn't help.
    When I'm playing a game I can often hear "faint" sound of USB connect disconnect happening with regularity..that little bing/boink sound etc..So it must just be constantly happening...Seems weird. Didn't have anything like this happening years
    ago with pretty much the same hardware and same Win7 with the continuing updates etc.
    What can be causing this common problem?

  • My internet keeps disconnecting

    Hi,
    I have seen many posts now about macusers having the same problem as me. I have recently upgraded to IOS Lion and have kept the software updted on a weekly basis.
    For some reason my wireless internet keeps disconnecting at speradic times during the day and it has become very irritating. It is not the connection as my PC, Iphone and Ipads are connected while both my Macbook pros decide to go wandering. I never had this problem when i was using the previous operating system but i see other uses had problems with that as well.
    Does anyone have any fixes for the problem or know of any patches that can solve the problems. Please help a very irritated Macuser.
    Thanks Nobby

    Well try upgrading the firmware of the router & keep on holding tightly
    the reset button in such a way that power light is blinking on the
    router & then do a complete network power cycle i.e., unplug the power
    cables from the modem & from the router & then plug in the power cable
    to the modem first once all the lights are solid green you could plug
    in the power cable to the router & check out it will definately work!!

  • External hard drive keeps disconnecting and then reconnecting

    External hard drive on Time Machine, running via USB keeps disconnecting. Get the pop us that the drive wasn't disconnected properly. This Mac is brand new as is the hard drive. It is a Seagate 1T Free Agent.
    After a minute or two it reconnects. I've run Seagate diagnostics and it says the drive is fine.
    Any suggestions?

    See #A1 in [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum), for a handy widget that will display the backup messages from your logs.
    See what that shows; there may be a problem with the backup, which results in TM ejecting the drive. If so, the disconnect may be a symptom, not a cause. If so, see #C2 there. If not, or if you're not sure, copy and post them here.
    Also, to rule out other USB problems, disconnect everything but keyboard and mouse; connect the drive directly to your Mac (no hub).
    Make sure all connections are snug and secure.
    Try other ports, cables, and combinations of the two (a plug that works fine in one port may not make good contact in another one, and throw intermittent errors).

  • My iphone external hard drive keeps disconnecting so it tells me I disconnected improperly. I have changed electric cord directly to outlet and usb also direct, and it still happens.

    I store ALL my photos (400 events) on an external 1T hard drive. The hard drive keeps disconnecting so it get a msg telling me I disconnected improperly basically which is a serious no no. I then have to re-start. I have tried connecting directly to the wall outlet, to a super duper surge protector and also have connected the usb (was on a usb port) directly to the computer. But it continues to happen a total nusance. What do I do?

    I would first contact  Seagate's tech support for a possible solution. If that doesn't prove successful then I would try a different product or consider building your own.
    Basic Backup
    Get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    Silver Keeper
    Retrospect
    Super Flexible File Synchronizer
    SuperDuper!
    Synchronize Pro! X
    Synk Pro
    Synk Standard
    Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.
    Although you can buy a complete external drive system, you can also put one together if you are so inclined.  It's relatively easy and only requires a Phillips head screwdriver (typically.)  You can purchase hard drives separately.  This gives you an opportunity to shop for the best prices on a hard drive of your choice.  Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu.  You can find reviews and benchmarks on many drives at Storage Review.
    Enclosures for FireWire and USB are readily available.  You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports.  I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.)  You can find enclosures at places such as;
    Cool Drives
    OWC
    WiebeTech
    Firewire Direct
    California Drives
    NewEgg
    All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover.  Usually the only tool required is a small or medium Phillips screwdriver.

  • WiFi keeps disconnecting in Mountain Lion 10.8.2 on Macbook Pro

    I have an early i7 2011 Macbook Pro. Since upgrading to Mountain Lion 10.8.2 my WiFi keeps disconnecting. There isn't a certain time it disconnects - sometimes it works fine for a few hours, sometimes for just 10 minutes. When the connection is lost, it shows that its connected in the taskbar at the top, however when going into network preferences it shows the WiFi as turned off. In order to turn it back on I need to restart the Mac.
    I have tried the following:
    reset SMC
    delete network preferences
    create new network connection
    add DNS servers
    Add manual MTU
    Require password to turn on/off WiFi / change network (still disconnects!)
    Change order of preferred networks
    I phoned Apple Care who told me to delete the network preferences, this worked for about 5 mins and then the problem returned!
    I cannot change the router settings as I connect to my employers network. All other employees using Window machines are working fine and my iPhone connects perfectly fine also.
    Somebody please help me! I feel my only option now would to do a clean install - not ideal! Apple, please HELP.
    Merry Christmas everyone.

    Hi - I have the same problem with my MacBook Pro mid 2010 which drops the wifi connection randomly (not necessarily when I move it or the lid - see other posts on this) and then often ends up freezing when I try to investigate.
    I installed Mavericks to see if that would resolve the issue but it doesn't.
    Somebody in one of these posts suggested it might be a faulty connection between airport card and mother board... which I suppose could be caused by a jolt to the machine (mine travels as hand luggage on planes every now and then).
    I am running OS X 10.9 on a 13 inch Mid 2010 MBP with a 2.4 GHz Intel Core 2 Duo and 4 GB 1067MHz DDR3 memory.
    If anyone comes up with an answer to this PLEASE post it here so that we can all resolve our wifi dropping/freezing issues!
    Thanks

Maybe you are looking for

  • Bridge File Type Associations don't see my (2014) products?

    I have just updated Ps, Ai & Id to (2014) and uninstalled old versions (Win 7) Now Bridge has forgotten all my File Type Associations (no Adobe products in drop down) same is happening with my suitcase fusion 5 plugs, 2014 product not in plugs list A

  • Map and weather app can't find location after a trip to China. How to fix this?

    I have seen question similar to mine but can't find solution to it. I've try hard reset and reset location setting, but still doesn't work. Anyone know how to deal with this?

  • Sorting differences between Oracle and SQL Server

    Hello All, This question is related to both Oracle and SQL Server I have a requirement where I want to compare 2 tables line by line. One table is in Oracle and other table is in SQL Server And suppose that both of the tables don't have a primary key

  • SCOM 2012 SP1 Test environment - "New View" is greyed out?

    I'm new to SCOM.... I just created a SCOM 2012 SP1 test environment, but for some reason the "New View" button is greyed out. (I attached a screenshot)  I can't figure out why and it pretty frustrating. I'm assuming it is a permissions issue, but I c

  • What exactly did I Migrate??

    Hi, I wanted to copy only a few things from my old Mac to my new MacBookPro. So I started Migration Assistant, thinking I could select individual files and folders. Mainly I wanted to copy my iTunes Library, plus a few random other folders in my user