Linksys WRT150N on all Apple network

OK...Here's what's happening.
I have a WRT150N that I've had for several years connected to an older Linksys cable modem. On the network is a Power Mac G4, a 20" iMac, a 13" Aluminum Unibody Macbook, a Netgear ReadyNAS Duo, a Linksys print server, two iPhone 4, an Apple TV 2, an iPad and an iPad 2.
I recently went wireless on all the computers except the G4. The problem is a couple things I have noticed. 1) The iMac seems to lose connection to the router when it comes out of sleep. Restarting the browser 3-4 times brings it back. 2) I use an iPad for music at night on the opposite side of the house from the router. Now I always have a full bar antenna but at some point in the night, the iPad stops playing. At first I was using my Pandora One account and thought maybe they were doing some kind of maintenace and booting me off, or possibly my ISP was. And always a full bar antenna. I was getting this with my old iPhone 3g but thought maybe it was an issue with the iOS on the phone.
So to test a theory, I set up a playlist from iTunes on the iMac (now obviously using ONLY the WiFi in my house) and it does the same thing. Last night when I woke and found it silent, I got up and woke up the iPad and found it scanning from song to song like it couldn't find a song so it moved to the next and so on. I hit pause, then play with the same result. I fully closed the iPod app and restarted and back in business. Mind you when this happened last night with the iPod app on ONLY WiFi, I still showed a full bar antenna. (on a side note, the Apple TV has acted weird several times while streaming or actually playing a movie)
Last Saturday I tested the iPad and Pandora at 3pm till 11:30pm with not one single issue. That night before bed, I stopped the app, restarted so to reset the listen timer from Pandora (I have read there is one) and right on schedule in the wee hours, silence.
I have read many things on the net about Linksys routers randomly dropping connections. Could this be what I am seeing and if so, why does it happen in the wee hours when we are sleeping?
I am seriously thinking about getting an Airport Extreme to see if it eliminates the issue.
Lastly, I have checked iStumbler and no one in my area has close to my channel so interference from another WiFi seems unlikley.

I think the wireless connection might be dropping on the router. Does this happen on any wired computer/device?
Try changing some wireless settings on the router and see if that works.
Connect the computer to the router with the Ethernet cable. open the setup page of the router and go to Wireless tab. Change the wireless channel to 11. Save the settings.
Go to Advanced wireless settings. Change the beacon interval to 75, RTS and fragmentation threshold to 2304. Save the settings.
Power cycle the router and try to connect to the wireless network again.
Make sure that firmware on your router is updated.

Similar Messages

Linksys WRT150N Crashes all the time...

Hey,
I have a problem concerning my WRT150N router. About 1-4 times a day the **bleep** thing just stops everything.
When I look at the status leds everything still looks ok and it seems to still be sending/receiving stuff from the internet.
I use it for cable internet. I have about 3 computers and a PS3 hooked up via networkcable and 1 computer and a laptop via wireless.
As I play EVE Online and other MMORPG's it is kinda crucial to have a decent stable internet connection. This is where my router lets me down.
I am thinking about flashing the router with DD-WRT ( know how its done and works fine my 2nd "router/accespoint" also a WRT150N uses DD-WRT since a few months). Before you ask yes the router has been crashing since before I used the 2nd WRT150N in my network. Most router/wireless settings are default ( except for the channels SSID broadcast and MAC adress security ).
Kind Regards,
Tim

Don't use the DD-WRT firmware, instead download the firmware from here , Follow these steps to upgrade the firmware on the device: -
Open an Internet Explorer browser page.In the address bar type - 192.168.1.1
Leave the username blank & in password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...

NS500 won't connect to my wireless network. All apple network- including airport.

Tried WPS button and so-called manual setup. After cable is unplugged thing goes ******.
Any ideas?

Hello Colleen,
Refer to the below link to manually setup the Network Speaker.
http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1027505
If you are using Macintosh, follow this link.
Disable the firewall in the Computer.
If there is no sound coming out of the Network speaker, there may be a problem with the network or there may be an incorrect setting. Follow these steps to try to resolve this issue:
   1) Make sure the volume of the speaker is up by pressing the VOLUME + button.
    The sound of the Network speaker may have been set to silence by the controller for your system. If sound is output for a moment and then is silenced again, the speaker may have received a command to silence the sound. Confirm the setting of the controller and then change the setting so that the sound is not deleted.
    2) Check the AUDIO IN indicator on the back of the Network speaker.
    If the AUDIO IN indicator is lit up green, the audio input setting has been selected and is active instead of the home network. Press the AUDIO IN button to switch the input to the Home Network setting. The indicator will go off once the Network speaker is connected to your home network.
Regards,
Colby

Can't find Network using a Linksys WUSB54G Wireless-G USB Adapter with a linksys WRT150N router????

Hello.....I just recently bought a linksys WRT150N router and am having problems connecting a computer that uses a Linksys WUSB54G Wireless-G USB Adapter. This computer's operating system is windows 2000 and it cannot find the network I setup.....Even when I double checked that the router was in mixed mode.....Can anybody help?

I am having a similar problem with my WUSB54GC adapter connecting to my WRT54G router 100 feet away with only a single stud wall in between. Sometimes the computer connects automatically and sometimes I have to restart windows or use the repair connection wizard to get the computer to connect. Using Windows XP and Mixed infrastructure network with SSID broadcasting disabled.
Message Edited by HOOfan_1 on 05-29-200709:03 PM

Build an All-APPLE home network from the ground up

I am an Apple/Mac novice, however, I would like to build a home network using an ALL-Apple solution.
Here is what I have: 3-Story, 20,000sqft home.
On the 1st Floor I have a separate DSL line that I would like to have a mix of wired and wireless. 3 sound studios to be wired and the remaining floor (home theater and large entertaining area) requires wireless.
The 2nd and 3rd floor(s) I have a DSL line for "living areas" of the house.
Each floor is roughly 6800sqft, thick walls, high ceilings...
I could at any one time have over 100 users connected to the 1st floor wifi and would also need to be able to connect to the 1st floor from the 3rd floor Master Suite.
I would like to be able to have family members connect to the "living area" wifi anywhere in the house and out near the pool area and not have it broadcast it's network ID. Guests should only connect to the first floor network ID.
There is CAT5 run to most of the house.
Any and all recommendations would be greatly appreciated.

Hello netaway. Welcome to the Apple Discussions!
Here is what I have: 3-Story, 20,000sqft home.
On the 1st Floor I have a separate DSL line that I would like to have a mix of wired and wireless. 3 sound studios to be wired and the remaining floor (home theater and large entertaining area) requires wireless.
Your network requirements are fairly complex and will, most likely, best be satisfied by hiring a professional to both design and install your network. Having multiple DSL lines and the requirement to have access throughout a 20,000 sq. ft. home would make it difficult to provide any useable advice without actually being there in person.
With that said, you are basically looking at a "roaming" network configuration. This would necessitate that the home be wired for Ethernet and placing Wireless Access Points at those locations where wireless is desired and Wireless routers (with built-in Ethernet switches) for those locations where you need to support both wired and wireless clients ... like the sound studios and home theater areas.
I would like to be able to have family members connect to the "living area" wifi anywhere in the house and out near the pool area and not have it broadcast it's network ID. Guests should only connect to the first floor network ID.
As you are probably aware, like most wireless routers, the AirPorts also offer the feature to not broadcast their Network Name or SSID ... so that in itself should not pose a problem, but beware that a Network Name can still be "found" is someone wants to access your network. Only wireless encryption with a strong password will provide the necessary security.

Works but not x2 iPad2. WiFi network is the same for printer and all Apple devices. Help.

We are unable to print from ipad2 using Epson Artisan 730 printer. Software download to Macbook was successful but unable to download software to x2 iPad2. All Apple devices are on the same WiFi. I followed the Epson instructions but message box pops up stating Safari unable to download file. Any suggestions.

Welcome to Apple Discussions.
The iPad and iPad 2 using iOS do not use the same software as your Mac using OS X.
They are entirely different operating systems.
Look in the iPad Apps Store for Epson iPrint app for iPad. It is free.
The Artisan 730 is one of the printers the app supports, so this app should allow you to print from your iPad.
If you're looking from the Mac side, open iTunes, and the iTunes Store, then the App Store, and search for Epson iPrint for iPad

Airport Express, Linksys WRT150N Router, Windows Vista - Scene Two

I hate to post again, but I am hoping someone can clue me in on what's going on with my Airport Express. This is my second post, as I thought it started working on its own the last time I posted, which was just three days ago.
I have read all over this dicussion group,and I think I've tried everything mentioned here, and under the sun. I have mine set up to JOIN my existing network only to let me play iTunes over my stereo.
Sunday I finally got my Airport Express to communicate with my computer. After an hour, I shut down my computer and went to bed.
Monday, I had to reset the Express to get it to start communicating again. Changed my Router to Channel 11
Tuesday, I had to reset the Express to get to start communicating again. But, it would cut in and out continuously. I changed my router settings again, and it started working.
Tonight, I turned on my computer, and the AE showed up as still being connected. I started to play iTunes over my stereo, and about 5 minutes later, it all stopped. I unplugged the AE to reset it, and it once again started working, and has been for about 15 minutes while I am typing this out.
Why does this small device cause so much trouble, and am I setting this up wrong? Here is how things are configured right now, and I am hoping someone can tell me what I've done, am doing, wrong.
Computer Details:
I have a Gateway FX530 running Windows Vista. I have set up a wireless network using a LinkSys WRT150N router which also shares my DSL connection. Using my laptop, the wireless system works great.
Linksys Wireless settings:
Wireless mode - bgn
Connection Type - dhcp
Radio Band - Wide 40 MHz channel ( I had to set it here for my laptop to work)
Wide Channel - 3
Standard Channel - 1 - 2.412 GHz.
(Monday it was working on Wide Channel 9, Std Channel 11)
Security Mode - WPA2
Encryption - TKIP or AES
Key Renewal 3600 Seconds
Beacon Interval - 100ms
DTIM Interval 1
Fragmentaion Threshold - 2346
RTS Threshold - 2347
Airport Express Settings:
IP Manually set to 192.168.0.104
Running version 7.3.1
Set to JOIN a Wireless Netowrk
Security WPA2 Personal
Channel: 1(Automatic)
Allow Ethernet clients is NOT checked.

Here is the absolute guaranteed way (that probably won't work for anyone else) to solve how to connect the Airport Express to a non Apple router to a non Apple computer. I will probably jinx myself upon hitting the Post Message button, but here goes.
Step 1: Spend countless hours trying to use the Utility to configure the device. This must be done over a course of 5 days. If you have small children, I would suggest doing this behind a closed door where all the swearing can go unheard.
Step 2: Read every possible thread here on the Discussions group trying every possible suggestion known to mankind.
Step 3: Post at least two threads yourself asking why nothing works. Mark the first thread as 'Answered' within 90 minutes of posting when the AE decides to work for longer than 5 minutes.
Step 4: On the 6th day, take the device back to the Apple store and have them verify the device actually works and that you are not going absolutely insane. Know that they will be testing this device from an Apple Computer thru an Apple router.
Step 5: Wait for the call, which you know is coming, that the device works perfectly for them, and that they can not find anything wrong at all.
Step 6: Feeling like all is lost, you retrieve the device from the Apple store and have the Tech person tell you 'Good Luck'. Yeah, that helps.
Step 7: Connect the device back to your system, program as required and connect to your stereo.
Step 8: Start up iTunes and enjoy endless hours of music.
Step 9: Now this is the crucial part. You sit and wonder WHY it all of a sudden starts working after you bring it in to 'be looked at'. You do exactly the same thing programming it as you did from the first 'out of box' scenerio, having changed nothing to the router settings that didn't work the last time before you brought it back to Apple Store.
Step 10: And in the spirt of the Apple Tech..... "Good Luck"

Horrible LAN pings on all Apple hardware

So I have a MBP 15" (latest), a MBA 13" (late 2011) and a MBP 13" (a bit earlier, but pretty recent) an iPhone 4s and an iPhone 4 on my LAN with a dual-band time-capsule with an express N in "extend a network" mode. On the 15" MBP if I ping google.com I get a rock solid 50ms ping time (+/- 5ms):
PING google.com (74.125.225.98): 56 data bytes
64 bytes from 74.125.225.98: icmp_seq=0 ttl=53 time=48.366 ms
64 bytes from 74.125.225.98: icmp_seq=1 ttl=53 time=52.572 ms
64 bytes from 74.125.225.98: icmp_seq=2 ttl=53 time=53.063 ms
64 bytes from 74.125.225.98: icmp_seq=3 ttl=53 time=52.277 ms
64 bytes from 74.125.225.98: icmp_seq=4 ttl=53 time=52.545 ms
64 bytes from 74.125.225.98: icmp_seq=5 ttl=53 time=53.017 ms
64 bytes from 74.125.225.98: icmp_seq=6 ttl=53 time=52.616 ms
If I ping a machine that's on the time-capsule ethernet, I get this:
PING 10.0.1.5 (10.0.1.5): 56 data bytes
64 bytes from 10.0.1.5: icmp_seq=0 ttl=64 time=642.520 ms
64 bytes from 10.0.1.5: icmp_seq=1 ttl=64 time=129.652 ms
64 bytes from 10.0.1.5: icmp_seq=2 ttl=64 time=153.549 ms
64 bytes from 10.0.1.5: icmp_seq=3 ttl=64 time=176.083 ms
64 bytes from 10.0.1.5: icmp_seq=4 ttl=64 time=324.919 ms
64 bytes from 10.0.1.5: icmp_seq=5 ttl=64 time=7.797 ms
64 bytes from 10.0.1.5: icmp_seq=6 ttl=64 time=771.227 ms
64 bytes from 10.0.1.5: icmp_seq=7 ttl=64 time=701.933 ms
Request timeout for icmp_seq 8
Request timeout for icmp_seq 9
Request timeout for icmp_seq 10
64 bytes from 10.0.1.5: icmp_seq=11 ttl=64 time=3.867 ms
Request timeout for icmp_seq 12
Request timeout for icmp_seq 13
64 bytes from 10.0.1.5: icmp_seq=14 ttl=64 time=4.644 ms
64 bytes from 10.0.1.5: icmp_seq=15 ttl=64 time=683.825 ms
64 bytes from 10.0.1.5: icmp_seq=16 ttl=64 time=2.300 ms
64 bytes from 10.0.1.5: icmp_seq=17 ttl=64 time=525.720 ms
64 bytes from 10.0.1.5: icmp_seq=18 ttl=64 time=445.582 ms
64 bytes from 10.0.1.5: icmp_seq=19 ttl=64 time=4.635 ms
64 bytes from 10.0.1.5: icmp_seq=20 ttl=64 time=287.609 ms
64 bytes from 10.0.1.5: icmp_seq=21 ttl=64 time=2.059 ms
64 bytes from 10.0.1.5: icmp_seq=22 ttl=64 time=207.607 ms
64 bytes from 10.0.1.5: icmp_seq=23 ttl=64 time=4.567 ms
64 bytes from 10.0.1.5: icmp_seq=24 ttl=64 time=584.469 ms
I've tried from every machine on the network and going to every machine and the LAN pings are all horrible. If time-machine is running it's even worse. I'm an experienced software engineer and have written a lot of network code, so I understand how an OS uses networks, but this kind of performance just blows my mind - I can't explain it. People seem to be "fixing it" by dumping Apple network hardware for far cheaper Linksys, D-link, etc. Is that the answer?
That's really sad if so. For what it cost me to have an all Apple infrastructure it should "just work".
Thanks,
Mike

So If I understand your network arrangement:
modem <--ethernet cable--> Airport (of some kind) <---wireless--> Airport Time Capsul <--ethernet--> BMP15.
or is it
modem <--ethernet cable--> Airport Time Capsul <--ethernet--> BMP15.
Also waht is the arragnement when you get the 50-60 ms?
is it modem <--ethernet cable--> BMP15?

IPhone Recognises All Wifi Networks Bar my Home Network

I have recently purchased a 32GB iPhone 4 (not 4S), and I have encountered the following problem: It will recognise most wifi networks promptly and without issue, but it does not recognise the one I use at home. Obviously this is a quite serious issue, as it is here that I will do most of my web browsing on my phone, and a stable wifi is needed to download apps. So without this I really have no recourse.
The problem in more detail:
I have been doing some research and, although some people have similar issues, my problem is unique. First, my phone does not even list the network in the wifi tab under 'choose a network'; second, I cannot add it by inputting the information for the network manually (it says 'Could not find the network 'X'); and third, it is not the case that this is a 'new' problem. I got the phone three days ago and it has never been able to recognise my home network. Apple and my service provider give me no help as it connects to all other networks I have encountered thus far.
All of these points lead me to believe that it is a problem particularly with my Network. However, it is not a hardware issue. In my household I have two desktop iMacs (both new) connected to this network, my three year old laptop, and two iPads (one first and one second generation). I have never had a problem with recognising the network or connecting to it on any of these devices; only the iPhone.
Additional information:
-This problem occured both under the operating system my phone came with (4. something) as well as the latest upgrade (5.0.1)
-The phone does have a 'Wi-Fi Address in system preferences
-The phone is indeed brand new
-The router I am using is a Cisco DPQ3925
-The channel width I am using is 20MHz
-I have my 'standard channel' set to 'Auto' (changing this makes me lose the network on all devices)
-The network is set to WPA2 Personal (not WEP, which seems to be causing some people problems)
-The SSID is indeed being broadcast
-This problem occurs regardless of how far I stand from the router
Attempted Solutions
-I have done a full restore to no avail
-I have restarted network settings on my iphone many times
-I have tried resetting the router with no luck
-I have tried turning on/off cellular data several times
-I have tried turning on/off location services several times
As mentioned, I assume the problem has something to do with the iPhone recognising the network settings. Some have suggested interference with other devices. I unfortunately have little experience fiddling with router settings, so I'll need to be walked through if this is the issue.
I eagerly await any possible solutions you would offer, and I am quite grateful in advance. I must say that this problem is very vexing. I have had my previous Nokia 3210 for over 10 years, and was quite resistant to upgrading. I am a Mac fanatic, and always want the newest models of PCs, but I have long resisted updating my phone for fear of problems just like this one. Please prove my phone troglodytism wrong!

I have an iPhone 4 and I do not have trouble with my wi-fi. I thought I would take the time to look at my router settings and see if there is something that I could find that differs. I use a Linksys WRT160N router, so that is one difference to start with, but that shouldn't be that big of a deal. I am using WPA2 Personal for security with a channel width of 20 MHz. Is there a possibility that you have MAC filtering on that would be preventing your device from connecting? Have you checked the Cisco website to ensure you have the most current software for the router? Which network mode are you using, B, G, N, Mixed? Are you able to connect to any other wi-fi network anywhere, a public one like McDonald's, Starbucks, your work? This would explain whether the wi-fi is good or there is a hardware problem with the iPhone.

Compatibility between windows 8 and apple networks?

Hi,
I have a apple network set up at my parent's house that has worked marvelously for the past years. THe network has a time capsule and two airport express. Unfortunately not everyone at my house is an apple user, and my stepdad just got a new HP laptop with Windows 8 and it doesn't seem to be connecting properly to the wifi network.
ANy idea why this is? is it a problem with the firmware? windows 8? the airports? the time capsule?
Thanks!

Windows does not handle the names that apple tends to default to.. so make sure all names are..
short.. 10-20 characters
no spaces.. they are not valid in windows networking
pure alphanumeric.. the apple default is to use apostrophe.. not at all liked by windows.
That unfortunately means a full reset of the whole system if it is non-compliant.
A different solution is to simply buy a cheap wireless router.. say TP-Link WDR3600, which is about $80 here.. and probably cheaper in US.. or even cheaper model, like 1043ND.. which is about $50 and run it as AP only plugged into the TC by ethernet.

Joining, NOT extending, a non-apple network

I just bought an Airport Express (N) for the purpose of using it to do Airplay. Just Airplay, no extending networks.
I have a not-Apple network (ASUS router running Tomato), so I do not expect "extend" to work easily.
When I ask airport utility (6.3.1) for Other options, it offers "Add to an existing network", which I choose, and
it reports that it will "Set up this AirPort Express to join or extend an existing Wi-Fi network".
However, when I then click "Next", it declares that "This AirPort Express will be set up to extend "mynetwork" ".
WRONG.
This AirPort Express will be set up to require a factory reset, because it cannot extend my non-standard network, and does not offer me the option to only join the network. It will get wedged. That is not at all what I want, but that us what WILL happen (I have tried this several times, I have tried dorking around with my Tomato wireless network to do WDS, to not do WDS, etc.
I tried to download 5.6 to see if that would work, but no, not on Mountain Lion.
I have tried holding down the option key while probing various menus and panes, but not luck there, either.
Are there any incantations, either on the Apple side or the Tomato side, that might work?
I still have 14 days to return this white brick.

I tried to download 5.6 to see if that would work, but no, not on Mountain Lion
You have to use a workaround to do this, but there are no guarantees, since Apple does not support this.
http://frank.is/mountain-lion-and-the-old-airport-utility/

How can I get my ATT iphone to connect to my Apple Network? (internet access code.s airpo

How can I get my iphone with ATT service to connect to internet using the Apple Network that all my other laptops and macbooks find easily and accept. The iphone only "discovers" some random DSL code that is NOT mine and that needs a password. Help!!! Not once has this phone allowed me to use my email.

There does not seem to be any hour glass type of waiting. When I installed AI I also had to manually activate it because it would not connect to the internet. I also have photoshop version 3 and 5 (but I removed 5 yesterday but that didn't help) on my computer. I tried disabling firewall but that didn't help. I can see no internet related information in the exchange panel.

Using an AE with a non-Apple network

Hello,
I have a new 802.11n airport express that I would like to use solely for streaming music from an ipod touch to my stereo (airtunes). The problem is that I am sharing wireless with my neighbor (yes sharing, not stealing, he gave me his password), and I would like to get the AE on that network, which is a non-apple network. Since I don't want to use the AE for internet I could just set it up with it's own network without internet and run airtunes that way. Unfortunately, in order to connect to it I believe I would have to disconnect from my neighbor's wireless network which would take me offline. This would be fine if I was playing music stored on my ipod touch, but I mostly play music through Spotify which requires an internet connection. So instead I would like to figure out how to join the AE to my neigbor's non-apple network using his network pretection info he gave me. Is this straightforward or do I have to change the settings to a different mode, like ProxySTA? Will it even work at all with a non-apple network?
This is a ski house I am renting for the winter and I am currently not up there, so I am trying to figure this out before the season starts.
Thanks so much for any help.
Sam

I would like to figure out how to join the AE to my neigbor's non-apple network using his network pretection info he gave me.
To join the wireless network, you would choose the option during setup of the AirPort Express (AX) to "Join a wireless network" and follow the guided step by step configuration process.
You will need to know the exact type of wireless security that is being used on the wireless network and the password for the network. You probably already know the password, but you will need to tell the AX what type of security settings it should use during the setup.
Unfortunately, there is just no way to set up the AX for the task that you want in advance because it needs to "see" the wireless signal before you can begin to configure the device.

All Apple Software removal

I've been trying to delete all the APPLE SUPPORT SOFTWARE Bonjour,Support Mobile,etc.from the ADD AND REMOVE PROGRAMS and it's not working.
The message is " The feature i'm trying to use is on a NETWORK RESOURCE that is unavailable" Enter an alternate path to a folder containing the installation package "AppleSoftwareUpdate.msi in the box below. Use SOURCE C\DOCUME~1PATSIL~1\LOCALS~1Temp\1. How can i find & remove so that i can START AFRESH and download ITUNES Fully?

Well, After three attempts to install the newest version and having the same issues each time....
No access to store, AppleMobile Service takes up 99 percet of CPU usage, so nothing else starts, and finally not one song, video, or app imported,..... I decided to give it a try with the previous version after a complete uninstall of all Apple software and the deletion of any iTune files which were left behind in other folders and doc/settings folders.
Back up and running with version 10.4.1.10
Had to select and import my iTunes Music and Video folders, then go to the iTunes store to re-download all purchased APPS but at least I have access and an operational program.
What a nightmare. Maybe Apple should compensate us for the insane amount of frustration and man hours involved for what I would consider malicious software upgrade they have provided over the last three updates.

Linksys WRT150N

I currently have my Linksys WRT150N wireless router and DSL modem hooked into my desktop computer. I also have set up a wireless network so I can access the internet on two laptops. I now want to get rid of my desktop pc...can I do this, or does my router have to be hooked up to it?

Yes you can disconnect the Desktop if you do not want to use it for the Internet ,
As your router is configured you will be able to access the Internet on your other computers .

Linksys WRT150N on all Apple network

Similar Messages

Maybe you are looking for