Linksys WRT1900AC dead after the week-end

Hello Folks,
Strange problem with my WRT1900AC. I've upgraded it to firmware 1.8 last friday. Everything was running fine and smoothly. Since I was away this week-end, I shut down the router friday night.
Restarted it this monday morning, Power light came back on and Internet light also (fix solid white). But that's it. Wi-Fi LEDS remained off. Routeur GUI is not accessible through the smartwifi portal... I tried to plug the routeur on another DSL access only to have the same issue.
Tried a reset with no luck. Seems like the router is bricked. Any help would be greatly appreciated !
Solved!
Go to Solution.

And you don't have to use Smart WiFi to set up the router. You can use the Local Log-In feature on the routers web page to set up the router. I recommend setting up the router for Smart WiFi after the router has been re-flashed and reconfigured locally.

Similar Messages

I am using Firefox 3.6.8. Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards. The problem is this: the browser continues to display tabs, the reload/home/history/favor

I am using Firefox 3.6.8. Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards. The problem is this: the browser continues to display tabs, the reload/home/history/favorites icons, URL field and Google search field while in full-screen mode, so it's not really full-screen anymore. How can I correct this?
== This happened ==
Every time Firefox opened
== Oddly, my problem appeared a few hours PRIOR to Firefox automatically installing the latest updates (the week ending 7/23), not afterwards.

Do you have that problem when running in the Firefox SafeMode?
[http://support.mozilla.com/en-US/kb/Safe+Mode]
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this:
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

Help!! How do you retrieve photos from Lightroom after the trial ends??

Hi, I was trialing the latest version of Lightroom and the trial period expired.. I have never used Adobe products before and I didn't realise I wouldn't be able to retrieve the photos after the trial ended! The photos are needed for an assignment for Uni that is due tomorrow!!
Is there ANY way to get the photos back??? Thank you!
Francesca

As Dorin says, your pictures are still there. Lightroom never modifies your images, so they're still there in whatever format you imported them. If you don't have use of Lightroom, you don't have access to the changes you've made to your images in Lightroom unless, while you still have use of Lightroom:
You export the images (to TIF or JPEG)
In Edit menu, catalog settings, metadata tab, you check "Automatically write changes into XMP", in which case the changes are written into the XMP sidecar files, which can be read by ACR in Photoshop (or Elements, I think).
To get yourself out of a fix, as c.frans says, download the LR4.1 RC2 version. This requires no serial number but it will time out in June, I think so remember to do one of the two options I mentioned above before then.

My ipod was disabled and i tried to restore it, now i am downloading an apple software update which is taking a **** lot of time and ipod is still disabled.. will it be ok after the download ends? help please..!!

my ipod was disabled and i tried to restore it, now i am downloading an apple software update which is taking a **** lot of time and ipod is still disabled.. will it be ok after the download ends? help please..!!

We need to know more about your system, please download EtreCheck and run the report and please post it on your next reply. Then we can see how your system is configured, what apps are on it and look for anything obvious. We will look forward to seeing your report.

Restrict the creation of documents in the cfolders after the Bid End Date

Hi All,
The System allows the bidders to create documents in cfolders even after the Bid Submission deadline has reached, whereas the Quotation would not be submitted as the Bid Submission date is in the past. Is there any way to restrict the creation of documents in the cfolders after the Bid Submission End Date?
Waiting for your reply,
Mary

Hi Mary,
In the competitive scenario in the first screen itself there are fields for "Due date" and "Due time". Once these entries are maintained, that particular collaboration will get freezed then and no documents or bids can be submitted post that time.
I hope this will solve your query.
Regards,
Nishit Jani
Award points only if you find the information useful.

DSL ON THE WEEK ENDS

I am so close to pro-rating my verizon DSL service!!! Every darn week end for the past month my DSL has been so slow or down its not funny. Why the heck am I paying for the best service (so Verizon says) and noiit receiving it? This is so darn out of hand lately

MrB68 wrote:
This is so darn out of hand lately
Agreed... they make up 60% of the threads in this forum for DSL lately. Guess someone's not monitoring the network as they should anymore.
What is the modem doing while the connection is down? Internet light Red or Out? Does it seem to only drop out and stay out the most during times of slow speeds? Any neighbors near you seeing issues as well?
========
The first to bring me 1Gbps Fiber for $30/m wins!

How to end showing the JTextfild in a JTable, after the user ended editing?

Hi,
I created a JTable with an own TableModel and I wrote my own
editingStopped function:
public void editingStopped(ChangeEvent e)
String helpName = new String(Framed.currentGame.players.getPlayerNames()[getEditingRow()]);
JTextField helpNewName = (JTextField)getEditorComponent();
Framed.currentGame.players.setName(helpName, helpNewName.getText());
Well everything works fine, except that the JTextfield doesnt go away after the user clicked on another cell. How can I return to show the cell instead of the JTextfield used for editing?

Or if the value is String you may try:
Object obj = table.getValueAt(i,j);
String str=null;
if (obj instanceof String){
str = (String) obj;
}

IDVD 08 replays immediately after the film ends

I've just burned a 1 hour film with iDVD 08, with the normal Intro menu, and everything works well.
The problem I have is that when the film ends, it starts playing again by itself instead of returning automatically to the Intro menu that should loop until the Play button is selected anew.
What I have here is that it is the film itself that is looping !
Is there a way to deselect this "looping" setting of the film itself ?
Is there such a setting, or is it a bug in this 06 theme that I used in iDVD 08 ?
Thanks in advance
BimBam

If you have any troubles with map view, it looks like this:

An incoming call from VoIP. The SPA122 generate Dial Tone after the far end hung up rather busy tone.

Hi All!
I have a problem with the SPA122 telephony adapter, uncorrectly process the subscriber signaling at the end of the call.
1) Outbound call from FXS port SPA122 . When a remote caller hangs up first , the subscriber SPA122 Reorder Tone played with a delay specified in the Reorder Delay. This circuit is working properly.
2 ) Incoming call from VoIP to the SPA122. When a remote caller hangs up first , subscriber on the FXS port of the SPA122 hears silence ~ 3-4 seconds , then SPA122 plays Dial Tone, as if he had just picked up the phone and he 's going to call . No signal lights out (Busy Tone or Reorder Tone) will not play .
Config is attached.
Model: SPA122, LAN, 2 FXS
Hardware Version: 1.0.0 Boot Version: 1.0.1 (Oct 6 2011 - 20:04:00)
Firmware Version: 1.3.2-XU (014) Jul 2 2013
Recovery Firmware: 1.0.2 (001)
WAN MAC Address: 6C:20:56:55:3A:B6
Host Name: SPA122
Domain Name: (none)
Serial Number: CCQ16450LG3
However, other VoIP terminals registered to Huawei, including older versions of the Linksys SPA2102 work in these scenarios correctly.
Where to kick it?

[2] is misconfiguration on your's side. You have CPC turned on, but no CPC capable device. Set CPC Duration to zero to turn off CPC.
By the way, wrong forum for your question. You should consider to move it to space.

Lync phone edition does not try to sign in after the front end server restarts

A restart of the frontend server. None of our Lync Phone Edition CX600 and CX3000 phones will sign back in. If you hit the cancel button and click it will work. This was fixed in a previous CU update but seems to be back again. CX version 4.0.7577.4451.
Any ideas to try. Cant always restart our switches.

Hi,
Please install the update KB3014910 in the link below:
http://support.microsoft.com/en-hk/kb/3014910
The Update resolves the issue: Lync Phone Edition cannot automatically sign in when the primary front-end server that you register is shut down.
If the issue persists, please also try to reset the IP phone and test again.
Best Regards,
Eason Huang
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Eason Huang
TechNet Community Support

What can i do if my new iphone 5 dropped dead after the last update and it only shows itunes on its window?

i connected my phone to the copmuter to chargethen i tunes asks for an update i strted installing and left it to finish when i came back it said that the update couldnt be finished and that i should try again later but my device is not working at all it just shows yhe i tunes logo on the cover and the usb picture below it. i gess its asking for me to conect it so i did but its just charging with out doing anithyng else and i can't access my device from the computer to search the problem either.HELP PLEASE im desperate!!!

Hi jandroantonio,
Welcome to Apple Support Communities.
It sounds like your iPhone update may not have completed succesfully. Not to worry, we have an article with information on how to treat this symptom:
iOS: Unable to update or restore
http://support.apple.com/kb/ht1808
Best,
Jeremy

Online streaming videos from PBSonline won't play after the commercial ends . It works in IE9 but not Firefox8.0 on Win7 system . Maybe I need a different plugin??

Just thought I'd ask in case others are having same problems or if solutions are available

In safe mode , no change in useability "watch PBS videos". Checked Theme/Appearance and selected Default 8.0 theme . This Add-on shows -Compatibility problems and the selection for "more" takes me a screen that has no options to change , upgrade ,repair. What would be the correct Default 8.0 Add-on for use on Win7 /64bit ?
Thanks in Adv. Cor-el for your time !
I don't know if its just me , but spent huge amount of time looking , filterering through sites trying gain understanding and corrective tools . The "check for updates" feature obviously is not working properly, I can't seem to find anything defined for Firefox 8.0! The Add-on page for Mozilla/ Firefox lists a bunch of "toys". There should a "serious section" to that site dedicated for system required plug-ins and add-on and upgrades . I'm like clicks away from Chrome , and I hate that action of frustrated disparity!!

After the battery ends, the database of iphot who is in a external HD, is corrupt

I have 147 Gb in the iphoto library, and it's in a externasl Hard Disk. Today, the battery is finished and now the database is corrupted.I can't open the actual iphotolibrary. The solutions of iphoto (open with alt+command) and select all the options, don't repair may iphoto.
What can i do?
Thanks

Give this a try:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.

I bought Premiere by switching plans after the trial ended but it still asks me to buy Premiere

PremierePro trial ran out so I upgraded from Photography Plan to Student Plan but PremierePro is still acting like it hasn't been paid for by me switching to a Student Plan. What should I do? Thanks

Hi boggotomm,
For this specific case, please contact support: Contact Customer Care
Thanks,
Kevin

Week ending date after 365 days in sql

Hi Experts,
I need to find the week ending date after 365 days of the given week start date .
Example : Week start date : 23-Jan -2011 (Sunday)
Desired week end date : 28-Jan-2012 (Saturday)
How to achive this through sql ?
Thanks .

Hi,
Check below this may help you, adjust "(t.day_num+1)" as per your requirment.
with t as
(select decode(to_char(trunc(sysdate + 365), 'dy'),'mon',1,
                                                  'tue',2,
                                                  'wed',3,
                                                  'thu',4,
                                                  'fri',5,
                                                  'sat',6,
                                                  'sun',7) day_num
                                                  from dual
select to_char(trunc(sysdate + 365)+ (7-(t.day_num+1)),'dd dy-mm-yyyy')
                                                  from t ;

Linksys WRT1900AC dead after the week-end

Similar Messages

Maybe you are looking for