Linksys wrt300N working perfectly until I changed my broadband line

Please help. My Linksys wrt300N was working perfectly but.. the analogue line that receives my broadband was switched & now I cant get broadband to go through the router. The linksys router feeds off a BT router & then a netgear hub. my laptop says that it is connecting well with the router but can not pick up the internet. The cable that plugs into the back of the linksys is sending broadband fine as if I hardwire my laptop in to it (therefore bypassing the linksys router all together) I have no problems connecting at all. I have tried restarting all the hubs in tern & still have no success. Any suggestions (I only bought the router recently but most helpfully cant find the start up disk or any related paperwork!).

Turn off the WRT300N. Unplug your modem, wait at least 10 sec then plug it back. Wait until initialization is over (flashing lights stabilize) then turn on your WRT300N.

Similar Messages

Click on the the emal on my iPad2 e opens blank and it does not respond to touch, it worked perfectly until this morning. All the settings are the same ed and correct

when I click on the email on my iPad2 the page opens blank and it does not respond to touch. It worked perfectly until this morning, I did not change the settings everything else is working good. Any idea what to do to sort this out will be very much apriciated.
Please help!

Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo.

My Ipod classic works perfectly until there's around 3 GB loaded on it, then there is an error message saying that it couldn't sync because of an unknown error.

My itunes and Ipod software are both the current version, doesn't seem to change anything. It works perfectly until there's around 3 GB loaded on it, then there is an error message saying that it couldn't sync because of an unknown error.

Hey joshuafromisr,
If you resintall iTunes, it should fix the issue. The following document will go over how to remove iTunes fully and then reinstall. Depending on what version of Windows you're running you'll either follow the directions here:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/HT1925
or here:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
Best,
David

How do I fix my audio/video in iChat 4.0.9? it has worked perfectly until last night.

How do I fix my audio/video in iChat 4.0.9? it has worked perfectly until last night. I have been having video calls iChat with my granddaughter for 4 weeks. All of a sudden last night I wasn't able to complete the video/audio. We were able to iChat with writing. The message I got was to go to connection doctor.
The error log -
2011-04-24 19:33:43 -0400: No data has been received for the last 10 seconds.
Audio channel info: local machine using 10.0.1.2:16402, expecting remote machine to send to 69.138.244.124:58521
Video channel info: local machine using 10.0.1.2:16402, expecting remote machine to send to 69.138.244.124:58521
Every time we tried to connect I got the same error message.
I use an airport extreme - my granddaughter has some kind of wifi - but the error was on my side not hers as she connected to her friends.
Please help.
Thank you.

Hi - I have a cable modem from comcast.
I am not sure I understand all your questions, suggestions - so I will copy what I have when I go into the airport utility under internet.
Do you have four tabs (You may have less) I HAVE 4 TABS
In the First tab what does it read at the Bottom ? AT THE BOTTOM OF THE FIRST TAB (INTERNET CONNECTION) IT DOES SAY "SHARE A PUBLIC IP" WHEN I LOOK AT THAT SETTING - I COULD CLICK INSTEAD BRIDGE MODE OFF, OR DISTRIBUTE A RANGE OF IP ADDRESSES. BUT FOR NOW THE ONE THAT IT IS ON IS THE SHARE A PUBLIC IP.
"Share a Public IP" ?
Or "Bridge (Off) Mode" ?
I DON'T UNDERSTAND WHERE TO LOOK FOR THE INFO BELOW. I ALSO HAVE UNDER THE INTERNET CONNECTION TAB - CONNECT USING ETHERNET AND ETHERNET WAN PORT AUTOMATIC (DEFAULT)
THE 2ND TAB IS TCP/IP AND THERE IT LISTS CONFIGURE IPv4: USING DHCP
IP ADDRESS: 69.138.244.124
SUBNET MASK 255.255.248.0
ROUTER ADDRESS 69.138.240.1
DNS SERVER 68.87.73.246 AND 68.87.71.230 (THESE ARE FILLED IN THE BOXES AND NOT CHANGEABLE.
THE 3RD TAB IS DHCP
DHCP BEGINNING ADDRESS 10.0 .1 .2
DHCP ENDING ADDRESS 10.0.1.200
DHCP LEASE IS 1 THEN DAY
4TH TAB NAT
CHECKED IS ENABLE NAT PORT MAPPING PROTOCOL
I HAVE BEEN USING THIS AIRPORT EXTREME FOR AT LEAST ONE YEAR.
THE ONLY DIFFERENT ISSUE IS THAT I HAD BEEN TRAVELING AND USED MY DAUGHTER'S AIRPORT EXTREME LAST WEEK. I HAVE NO IDEA ANY OF THAT INFO - BUT I DO KNOW THAT THE AIRPORT EXTREME LISTED IN THE UTILITY IS THE ONE AT MY HOME THAT I AM WITH NOW.
THANK YOU FOR TAKING THE TIME TO TRY TO HELP ME. I REALLY APPRECIATE IT.
JUDY
Between that drop down and the tabs should be the info on how it connects to the Modem.
It may list that Puiblic IP.
It may list another LAN IP (one from the Modem)
Does it start 192.168....
Or 172.16 (or up to 172.32....)
Or possibly another 10.... number ?
If the modem is issuing IPs to the LAN there are two things that can effect things
One is the fact the computer gets two IPs (even though the mac can only display one)
And If you used Port Forwarding in the Modem the Place (IP/Computer or device) that it was pointing to may not be the Airport Base Station any more.

I use a yahoo account for my e-mail which worked fine until I changed my password a few weeks ago. I now keep getting a message up telling me to insert my password again. i know I'm putting in the right password but this driving me to distraction!

I use a yahoo account for my e-mail which worked fine until I changed my password a few weeks ago. I now keep getting a message up telling me to insert my password again. I know I'm putting in the right password but this is driving me to distraction!
I have now deleted the account and reinstalled it but now I can't get my e-mails through at all. Can anyone make any suggestions?

Hello,
Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over.
You may have multiple entries.
Open Keychain Access in Utilities, enter the part after the @ sign in the search bar, hit enter

I have set hyperlinks within my ibook author document, they work perfectly until i export and view on the ipad, when only one or none work, (hyperlinks to website not working at all) what am i doing wrong?

I have set hyperlinks within my ibook author document, they work perfectly until i export and view on the ipad, when only one or none work, (hyperlinks to website not working at all) what am i doing wrong?

An external hyperlink should handoff to Safari and leave iBooks.
If that's not happening, perhaps there is something misconfigured on your iPad? Have you manually confirmed those links work in Safari on your iPad?

Mail suddenly marks as spam what is not and viceversa. It has worked perfectly until a few days ago. How can I restore the old junk "learnt" list? Where is it to be found?

Mail suddenly marks as spam what is not and viceversa.
It has worked perfectly until a few days ago. How can I restore the old junk "learnt" list, since it is marking as SPAM senders who have been my correspondants for years?? Where is the old junk pref file to be found?

Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
I suggest that no response is made to this duplicate thread.

I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. Where can I download ios 4.3.5 from?

I have a 4th generation iPod touch which was working perfectly until I downloaded ios5 and now it won't connect to my wi-fi - all other devices working correctly. My pc didn't create a backup before updating software so I can't revert back to ios 4.3.5 from there, where can I download ios 4.3.5 from?

I tried just about everything and finally brought my Ipod touch to the apple store. The tech installed ios 4.3.5 but still no WIFI. He recommended a $149 exchange - not really a bad deal with a new battery and 90 day warranty, but I thought I'd try again.
The "solution" was bizarre. On YouTube was a fix involving taking the motherboard out and heating the wifi components with a heat gun.
I did not like that idea, but another involved turning it off, putting it in the freezer for five minutes and restarting. It worked! I must admit the fix does not work reliably, so I may still go for the exchange. Still, I am now convinced that it is a hardware problem. i remember back in the old days, TV repairmen sprayed a suspected bad resistor with Freon. The chilled component would work long enough to identify what needed replacement. Perhaps something similar is happening here.
For anyone wanting to try this, I found it more convenient to place the back of my ipod on a frozen cold pack until the wifi is restored. It seems to happen when condensation forms on the face. I used a towel to wipe off the moisture so as not to add to the problem.

Cannot access the iCloud mail for some reason I don´t know. Worked perfect until Nov 28th, but a message with "incorrect ID/password" popped up. Contacts and iCal is accessible. Have tried from iPad, Mac, iPhone and PC. Any recommendations?

Cannot access the iCloud mail for some reason I don´t know. Worked perfect until Nov 28th, but a message with "incorrect ID/password" popped up. Contacts and iCal is accessible. Have tried from iPad, Mac, iPhone and PC. Any recommendations?

Reset your password. Be sure your new one meets the requirements for length (8) and characters (at least one upper case and one number).

TM works perfectly until I turn computer off

I've been using TM since release and it's worked perfectly so long as I don't turn either the hard drive or computer off. If I do, upon restart TM seems to forget that it has already been backed up for days. It goes into endless "preparing" status eventually telling me that the backup failed due to lack of room (as if it's trying to do a full backup instead of just backing up the minor changes I made since the last time it ran). I've had this happen twice now. The first time it happened I used disk utility to partition/erase the drive (as per Apple's specs) and everything was fine for a few days until I turned the computer off. Then on restart it did the same thing again. Any suggestions? I have about 60GB of data on my computer- backing up to a 120GB Hard drive. There is nothing else on the drive except the TM backup and at the time of the last backup (prior to turning off the computer) there was more than 45GB of free space.

Have you tried walking it into the nearest Apple Store and asking for assistance there...?
I'm guessing you don't have Apple Care on it.

When I try to open my adobe acrobat X Pro it says it failed to send a DDE command. It was working perfectly until yesterday.

When I try to open my Adobe Acrobat X Pro I get a message that it failed to send a DDE command. It was working fine until yesterday.

When I try to open my Adobe Acrobat X Pro I get a message that it failed to send a DDE command. It was working fine until yesterday.

My iphone 4 has been working perfectly until now! The bluetooth no longer switches on and the wi fi also will not switch on! Any suggestions?

My iphone 4 will no longer let me switch on the buetooth or wi fi. It was working perfectly then all of a sudden it all stopped!!!!! Why???????

yes, your option is as limited as getting it into the hands of an apple store employee (or if you have to ship it.. if there is not a store close by)
My wife's old 3G had this problem, it is a battery issue. They replaced my wife's iphone within a day, but I'm not confident any amount of user troubleshooting will fix your problem

Firefox dumped me out. I uninstalled and tried to re-install, but now it won't re-install. I assume Microsoft Explorer is somehow sensing this and dumping me. Firefox used to work perfectly until recently. How can I re-install?

I downloaded Firefox and it worked perfectly for awhile. It then dumped me out and my screen showed a blue background with a "critical error" message. It kept dumping me out, so I uninstalled Firefox and tried to re-install. Now it won't even re-install. As the re-install process almost finishes, I get dumped and the same "critical error" screen appears. I assume there is something with Microsoft or Explorer that is sensing what I'm trying to do and stopping me. How can I get Firefox to download again?

I love a good anti-Microsoft story, but this isn't likely to be Redmond Sabotage.
If you got a blue screen, you might be near the end of this computer (dying hardware) or need to reinstall your OS (reinstall Windows). Windows gets "clogged" and needs reinstalled ever six months to a couple years, depending on your use. System restore might help you here.
You might have malware that's trashed critical system files (or just corrupted something which should be removed with a Firefox uninstall but can't), but [http://www.google.com/#q=blue+screen+of+death the blue screen is never a good sign]. System restore may or may not help in that case.
Try installing something else and see if it succeeds. [http://openoffice.org/ Open Office] is a great application suite, though it's a bit large to download. [http://www.safer-networking.org/en/download/ SpyBot] is only around 17MB IIRC.
Best of luck!

How to have Linksys WRT300N work with Westell DSL Router?

I have a DSL Modem (Westell Versalink Model Number   A90-750022-07
[IP 192.168.1.1]
I would like to use the Linksys WRT300N to connect my wired and wireless devices to.
DSL Line -->   Westell       --> Linksys WRT300N
                        192.168.1.1
Can you tell me what settings I need on each router to enable usage? Cabling?

You can also try the steps on this link depending on your preference: http://kb.linksys.com/Linksys/ukp.aspx?pid=80&vw=1&articleid=3733

I set up an autoreply but i cannot work out how to change the subject line to the one I want

I set up an automatic reply but the subject line come up as re: and what the other person wrote. I want to change the subject line to a set one to all emails. How can I do that?

What email program are we referring to?

Linksys wrt300N working perfectly until I changed my broadband line

Similar Messages

Maybe you are looking for