Linksys WRT320N Problems. Keep losing speed day after day
Hello,
I have a nasty problem and I absolutly got no clue on how to fix it.
A couple of days ago I installed my new WRT320N router in combination with 50mbit speed from Ziggo (netherland internet provider)
At day one speedtest.net always gives 47/48 mbit down and 5 mbit up.
But after a few days the router keeps dropping and dropping and dropping till about 2mbit.
Now I've resetted the router and also rebooted the modem for new software etc but still nothing works.
Ive also tried to reset the router to Fabricage settings and that worked .... until it went lower day after day.
I also took some tips from this forum which was MTU setting to 1350 on manually instead of 1500 automatic and that worked... until some days passed and again ive got 10mbit today.
I'm clueless and in desperate need of your help!
What setting keeps dropping my router speed from 50mbit to almost zero in a couple of days each time?
Thank you in advance!
Rens Voeten
Edit Each time i switch the MTU to 1500 and then again to 1350 makes the speedtest.net meter jump up to 50mbit again like crazy.
But if i want to leave it, it will decrease again day after day.
Message Edited by Rabbitto on 09-28-2009 12:24 PM
Message Edited by Rabbitto on 09-28-2009 12:25 PM
Solved!
Go to Solution.
Login into the Linksys setup page and Click on Subtab Advanced Wireless Settings under Wireless tab...Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
If the above settings doesn't works then try to reflash/upgrade the firmware of the router.Download the firmware from www.linksys.com/downloads and save it on the desktop.Now go to the linksys GUI and click on the Administrator tab and then subtab "firmware upgrade" to upgrade the firmware.
Similar Messages
-
hi guys,
i have a strange problem .
day after day my internal hardrive loses some memory space ...of course i'm sure it is not by my downloads ... its like theres something invisible always recording by taking space or a weird bug dunno ...
please help !
ty guysHello,
Sometimes Logs will grow when something is wrong at an alarming rate, but...
OmniDiskSweeper is now free...
http://www.omnigroup.com/applications/omnidisksweeper/download/
Get that & find out exactly where the problem might be! -
Have you experience a problem about losing your internet after downloading itunes? How to fix it?
- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself -
I seem to lose the connection of my Magic Mouse often, daily and sometimes several times during the day using the Mobee charger even after charging overnight. Ideas?
The charger is plugged into my Cinema Display and has worked fine for 6 months or more.
Thanks !
Ira-Thanks Steve-
The problem seems to have just gone away.
I wrote to Mobee, and their answer is to take the batteries out, recharge and see if that does the trick.
Having been through this once before, and sending pictures along of the MM, which didn't help, it was just an oddball problem that has gone away.
I'll keep an eye on things.
I guess it's just one of those mysteries of Apple and the third party.
Thanks for taking the time to answer,
Ira- -
I have two problems actually, which I think are connected.
I installed a new hard drive and am in the process of returning my macbook pro to normal. I'm now using Mac OS X 10.6.8 and I want to be able to update to OS Lion.
When my computer is on it can connect to our wifi without any problems (so the password is working). However, everytime I restart, it looses the connection and does not automatically reconnect. This never happened before and I can't seem to figure out where I can change this. All I have to do to reconnect is go to the wifi symbol and choose our wifi code. It then automatically connects without me needing to type the access code.
The seconde problem is when trying to update to OS Lion, when in recovery mode, all I get is a screen asking me to connect to wifi. I choose our wifi and now I do have to type a password, but whatever I do, it does not accept the code. It has nothing to do with capslock or anything like that.
We are sharing our wifi with our neighbour, so changing the password is not an option. But is is just a simple letters and numbers password.Why not do a "Restore" in iTunes to set it back to factory settings? That will eliminate any previous information that is causing you issues in use. You will have an iPod which you can sync as if it is new with your settings and info.
-
Launchpad keeps losing folder setup after Mountain Lion upgrade
Hi experts !
Since upgrading to Mountain Lion I've noticed an irritating issue with Mountain Lion... Launchpad loses the folder organisation I set up every couple of days!
I can restore the folders from launchpad backup and it will be fine for a short period but, seemingly randomly, it resets to individual items. When this happens if I look in System Prefs>Launchpad all the items are shown individually and ticked.
All the apps launch ok but this is just irritating as it's a pain to scroll through the screens to find the app I want ( yes I know I could use Launchpad search but the point of folders is to make it simpler ! )
I've looked in system log for any error string with "Launchpad" but nothing.
Any ideas... anyone else suffered from this?
Cheers
IainHi experts !
Since upgrading to Mountain Lion I've noticed an irritating issue with Mountain Lion... Launchpad loses the folder organisation I set up every couple of days!
I can restore the folders from launchpad backup and it will be fine for a short period but, seemingly randomly, it resets to individual items. When this happens if I look in System Prefs>Launchpad all the items are shown individually and ticked.
All the apps launch ok but this is just irritating as it's a pain to scroll through the screens to find the app I want ( yes I know I could use Launchpad search but the point of folders is to make it simpler ! )
I've looked in system log for any error string with "Launchpad" but nothing.
Any ideas... anyone else suffered from this?
Cheers
Iain -
KT4V keeps losing lan driver after shutdown
Hi All
Was wondering if anyone came across this problem... just bought a kt4v when i upgraded my wifes pc the lan controller says it is via vt6103 lan controller but there are no drivers on supplied cd also when the pc is shutdown it loses the network adapter drivers so everytime it boots up from being shutdown i am having to install the drivers again. If anyone has had similar problem please let me know.
Thanks in Advance
JohnDefinitely go with the driver Bas suggested. Since you didn't really say where you got your original driver from (I am willing to bet anything the driver is on the CD but hidden really well), I would warn against using drivers that Via might supply. In my experience, I've come across problems using those drivers for such devices (modems have been the worst for me ). I like to stick with the drivers provided by whoever makes the motherboard, add-in card, etc. Though, I will say that Via 4in1's and nVidia Detonators have been pretty good, usually because video card and motherboard manufacturers, like MSI, don't make unique drivers necessary to the best of my knowledge (they just post the same ones about a month later ). Anyways, I have that board, and I haven't had a problem with it.
-
Keep losing all contacts after restoring to back up. Help?
Everytime I restore to a back up for my old contacts, they vanish after a few minutes, sometimes seconds. Can anybody help?
If you have performed a sync with the device since you restored this old backup, then don't bother looking for another backup. iTunes writes over the last backup each time you sync. If you were handling contacts in iCloud, you would find them by logging into iCloud. Or you can check settings and iCloud and see if the button it on for Contacts. Otherwise it might have been on the computer, if you had a program that syncs with iTunes and handles contacts, depending on the computer system you use. If Windows, it would be Windows Contacts or Outlook. If a Mac, there is a Mac Address book as well.
-
Updating bridge fails day after day code: Error code: U44M1I210
Since the first day that a new version of Bridge CC was offered I tried to update my version. It fails every time. All the other apps go smoothly only Bridge fails, error code U44M1I210. Working with a Mac maverick latest version. Solutions welcome
Hi jepekl01,
Please check the KB : http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
I have also seen that deleting the ~/Library/Application Support/Adobe/AAMUpdater/ directory has fixed the issue for few users.
Regards,
Rave -
Please help. My iPhone 4S keeps losing signal (no service) I am with EE orange uk. The phone is only Agee days old. Never had this issue with previous phones.
Same problem!!!
There are many ways to fix it
First you must change the USB cable... Or download new version iTunes bro...
Or if your laptop says " the usb NOT recognize " try to pull up the laptop charger,
It's work for my device, try this bro !!
Im sorry my english is bad!!! -
My ipad3 seems to have connection issues. It is wifi only but keeps losing the connection and is really slow in loading pages - a bit like dial-up speed! My iPhone 4s and daughters' ipad2 have no problems at all. Any ideas anyone?
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Been trying to restore Ipod touch for days after updating Itunes. Error code #9. Stuck on restore screen. Tried all the solutions posted. Tried on 2 computers, Vista + XP. No device shown on computer. Thanks Apple! Didn't have this problem before update. How about rolling back your update?
Error 9
This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if you manually disconnect the device during the restore process. You can resolve this issue by using USB troubleshooting, using a different Dock Connector or Lightning Connector to USB cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software. -
I bought a WRT320N Linksys router and keeps dropping out
I bought a Linksys WRT320N Router about 2 weeks ago. I am very upset that I did not take time to do my home work before I got screwed. I brought the router home and connected it. I am pretty familiar with networking these routers, I had the thing connected for about an hour, everything going good and then my wireless dropped out, my son started complaining he could not get his playstation 3 to work over the net, and then I did a speed test for the internet speed. I got 1 MB/s (Normally I am pegging around 30 MB/s, which is like flying, at least for me.) I was waiting for about 40-60 seconds for my homepage to come up. Disconnected my router from the computer and plugged direct into the modem and found I was still pegging 30 MB/s. Plugged back into the router and sure enough I was at 1 MB/s.I reset the router and charged on. The next day, same thing. So I called Linksys and told them what was going on. Well for one, the person on the other end of the line did not know about routers, I do not think she could even pronounce router if she tried. I spent 1.5 hours on the phone with her. After it was all done and over with her reply was " When it happens again, call us" . Oh yea, I want to spend another hour on the phone going through reset this, reset that. I already have done that.
Anyway, I got on this post and looked up my router thinking you guys may have better ideas than linksys, and of course you did. I read that these routers are overheating. So I connected a fan to the bottom of the router and I have air being sucked through the router cooling it down. So far it works okay. I went 1 week and 2 days before I had to reset. I connected a themometer to the case of the router and what did you know without the fan the router was running around 100 degrees F, the router was hanging in the air so it had plenty of ventilation. If the case is 100 deg. F, the insides must be frying. When I have the fan running the temperature of the case stays at room temperature or just a degree above. It must work some because I was going from resetting everyday to resetting every 1.5 weeks. I will keep you apprised of how the router is doing. I just have to say, Never again will I buy a linksys product. I will buy another brand until the engineers at linksys can figure out how to correct the router they have out there.
(Mod note: Edited for guideline compliance. Thank you.)
Message Edited by Vince_02 on 04-24-2009 12:18 PMIt is not possible that all WRT320N Wireless router's would act same, maybe the router you bought went bad, you should replace the router with the same model and that should resolve all your issues...
-
ITunes keeps losing my library every 2-3 days!
iTunes keeps losing my library every 2-3 days. Completely erasing all songs and playlists. This is incredibly annoying and forces me to redo it all AGAIN.
Any way for me to solve this problem?Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. Note that in iTunes 11 an "empty" library may show your past purchases with links to stream or download them.
In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
Alternatively, depending on exactly when and why the library went missing, there may be a more recent .tmp file in the main iTunes folder that can be renamed as iTunes Library.itl to restore the library to a recent state. Look for a recent .tmp file that is similar in size to the .itl files in the Previous iTunes Libraries folder. If it has happened repeatedly you may want the earliest such file generated since the last iTunes upgrade.
If applicable, see iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
Should you be in the unfortunate position where you are no longer able to access your original library, or a backup of it, then see Recover your iTunes library from your iPod or iOS device.
I've noticed more of these missing library posts of late and a common factor to most since I started asking is AVG Anti-Virus. It seems in some cases it might be at least part of the reason why the library file disappears. Try excluding the iTunes folder from any AV scanning process.
tt2 -
Problem with ARD3 keeps losing the cursor
I am having problems with ARD3 whereby I keep losing the cursor when controlling another machine. The cursor is still there but you have to click-drag to see it moving. There was a similar problem a few months ago after a system update and pre ARD 3.1. I used to be able to upload the ARD client and that would solve the problem temporarily. But now that won't even work.
Another thing I notice when that happens is that my "Hidden Dock" stops appearing unless I click in the area. That also happens with my menus. And Expose stops working too.
The only way to get around the problem, is to either restart the computer or leave it for anything up to 1 hr, then it will be fine again.
Does anyone have the same problem?
I use a MacBook Pro DC 2G with 2G of RAM. 10.4.9 and all the latest System Updates including Security Update 2007-04. This started happening even before the 2007-004 security update.
MacBook Pro DualCore 2G Mac OS X (10.4.9)I find that this happens only if a tool tip comes up after having it over an item in the toolbar however clicking in the remote computer's windows somewhere will bring the cursor back. Additionally switching windows, to say the main ARD window, and then back again will restore it as well.
Maybe you are looking for
-
How to rename custom tab?
I add container (JSPTableContainer) to JSPTabContainer and now cannot change the title of this tab; in the "Tabs" link inside the portal there are no actions "Rename" or "Delete" for my tab. Changing the property "Title" of my container also has no e
-
Primavera - SAP Interface/ integration
Hi, I Need some information and help related to Primavera - SAP Interface/ integration. 1. what are the Prerequisites? 2. How it works - means how data will get transferred from primaver to SAP? 3. whether this transferr is Direct or some third party
-
What means: Automatically approve updates to the WSUS product itself
Dear all, on a WSUS server / Update Services / Options exists the "Automatic Approvals" Option. Once you open it, advanced features will be shown. One of the advanced feature is called: "Automatically approve updates to the WSUS product itself" Does
-
Have had new iPAD 2 for a month now- about 90% of the time it won't sign on to wifi networks that require a log on page - it simply won't bring the log on pages up and I haven't figured out anyway to make it do so - I have tried rebooting, turning wi
-
An Error in the Installation of PS CS2 on Windows 7
I haven't seen this issued addressed here on the forums yet, and I've been trolling for awhile Here's my problem: I recently upgraded my Windows Vista OS to Windows 7 (my computer is fully upgraded as far as I know since it's practically new too). Du