Linksys WRT54G2. How reserved IP address for a PC on the LAN ?

I want that my PC will always receive the same IP address each time when it accesses the DHCP server.  

So all you need to do is enable the DHCP Reservation on your Router. But unfortunately the Router which you have dosent have a DHCP Reservation option. If you want your computer should get the same IP address from the Router, then the best way is to assigne a static IP to your Computers.
Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'- Provide IP Address - 192.168.1.5, Subnet Mask - 255.255.255.0, Default Gateway - 192.168.1.1- Preferred DNS 192.168.1.1, Alternate DNS - 4.2.2.2 >>Click on Ok button to Save and Click on "Close" on main Properties window.

Similar Messages

  • Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address.  My other devices all have the correct address.  How can I get the correct address for my iPhone?  The only Apple ID that works for logging in is my new one.

    Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address.  My other devices all have the correct address.  How can I get the correct address for my iPhone?  The only Apple ID that works for logging in is my new one.

    To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use.  If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • I have an iCloud email address on my iMac. How can I create an icloud email address for my wife on the same computer?

    I have an iCloud email address on my iMac. How can I create an icloud email address for my wife on the same computer?

    If all you want is an additional email address you can create up to three 'email aliases'  - these are additional addresses (not accounts) which deliver into the same inbox as the main account.
    You should be aware before you start that once you've created an alias you cannot turn that address into a full iCloud account, move it to another account, or reactivate it if you delete it.
    More information on aliases here:
    http://help.apple.com/icloud/#mm6b1a490a
    If you want to keep her email separate from yours she will need to create a new Apple ID, and use it to create a new iCloud account either on a separate computer or on a separate User Account on your Mac.

  • Hi i use iphone 4 with iso 6.1.3!! Am not getting an option to register my phone number in imsg!! Am just getting an option to set my email address for sending and receiving the imsgs!! How do i register my phone number??

    Hi i use iphone 4 with iso 6.1.3!! Am not getting an option to register my phone number in imsg!! Am just getting an option to set my email address for sending and receiving the imsgs!! How do i register my phone number??

    Hello Nikkii,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Troubleshooting telephone-number activation (iPhone only)
    After each step, toggle FaceTime and iMessage off and then on in Settings > Messages and Settings > FaceTime.
    Update to the latest version of iOS.
    Ensure that your iPhone is set to the correct time zone. Tap Settings > General > Date & Time.
    Note: If Set Automatically is on but the incorrect time zone is displayed, turn Set Automatically off and then choose the correct time zone, date, and time. Then turn Set Automatically on again.
    Ensure that FaceTime has not been restricted: Settings > General > Restrictions > FaceTime.
    Verify that you can send SMS messages. You need a valid SMS messaging plan to activate FaceTime.
    Contact your carrier to verify that there are no restrictions or blocks on text messages. Blocks on text messaging will prevent iMessage and FaceTime registration.
    If you are unable to activate iMessage or FaceTime on a device after remote wiping it, wait at least 24 hours and try again.
    If "Waiting for Activation" is displayed, leave FaceTime and iMessage enabled for 24 hours. Toggling FaceTime or iMessage off and on will cause the registration process to start over.
    Best of luck,
    Mario

  • How do you search for a song in the latest version of ITunes??

    How do you search for a song in the latest version of ITunes??
    Yes this might be the stupidest question ever, but leave it to Apple to make the simplest thing hard.
    In EVERY version of Itunes, up until 11, you used to be able to type an artists name, song name, or album into the search field and it would narrow it down so that you can see what you are looking for (in the list below).  Now, Itunes tells you that you have music by said artist, yet doesn't list them whatsoever. Furthermore, when you click on the results it doesn't list them for you either.
    I'm sure it is some weird setting, but cannot for the life of me find.  I cannot name one application that doesn't show a list when you type in the search field.  Augh!
    Please help.
    G

    You can choose what it searches and where

  • How do I search for a string in the Text tab of the Layers panel

    I have a world map with a text layer for country names.  I hide the country names as needed by clicking on the 'eye' icon for Toggle Visibility in the Layers panel.  I've inadvertently hidden one name and I need to know how to find it in the Text panel so I can make it visible again.  How do I seatrch for a name in the Text panel?

    Just in case there is an unlocked and visible object close to the hidden one in the stacking order, you may select that object right on the artboard and then go to the Layers palette menu and take the Locate Object command.
    Of course, this would be just one possible workaround to locate the hidden objects a bit easier.

  • How are people searching for music now that the power search link is gone?

    How are people searching for music now that the power search link is gone?

    That info in my above post doesn't bring back Power Search
    I think this Discussion holds the answer https://discussions.apple.com/message/20451945#20451945
    Found it under iTunes U!  Don't know why the moved it from the main page but you will find it here.

  • Which free email program can I use to create a reserve email address for use with a Mozilla browser?

    Hello,
    Since it took over an hour to send an email from my gmail address the other night andsince I have tried unsuccessfully to create an @outlook.com address in Internet Explorer 8 I would like to use Mozilla to create a free reserve email address. Is it possible to do this in Mozilla instead of using Google Chrome or Internet Explorer 8? Thank you for helping a real dummie when it concerns creating a reserve email address.
    Kind regards,
    Edwin

    Enter yahoo.com in the address bar and then navigate from the Yahoo home page. You may want to bookmark the login or mail page, or make it your home page, for easier access.
    * [[How to use bookmarks to save and organize your favorite websites]]
    * [[How to set the home page]]

  • Urgent!! How does mailing address for contacts work in CRM 5.2?

    In creating a new contact, one has the choice of selecting from one of the addresses entered for the Account the contact is associated with.
    Is there a way to enter a mailing address for just the contact independent of the addresses entered for the account or at least designate one for the mailing address for the contact. When editing the contact, it shows a section to enter home address but not mailing address.
    Maximum points for helpful answer!!

    Originally Posted by vBDKv
    It's pretty much like CMSS-3D, just better.
    CMMS-3D works like this http://forums.creative.com/showthrea...l=1#post521522
    CMSS leaves SBX 3D positioning for dead.

  • How to make entry for transit loss in the system

    Hello to all,
    I am having an issue with one subCon material.
    Suppose,
    Material A is the product required of 3000 MT Qty.
    SubCon vendor have sent that qty, but there is a transit loss of 500 MT.
    How to make entry for this transit loss in the system.
    regards,
    Anisha

    correct me if i am wrong-
    ur scenario is
    for making material A ,
    3000 MT of material B required.
    but for producing A vendor uses 3500MT of B
    solution : if this ia the case then u can overwrite the value of B at GRN from 3000MT to 3500MT.
    OR
    ur scenario is -
    u require material A of 3000MT
    vendor sends u 3000MT
    but actualy u recieve 2500MT
    and u have to pay for 3000MT as per bill
    solution : if this is ur scenario then.
    prerequisite-activate direct posting to G/L and material at MIRO
    Path - SPRO->MM->LIV->activate direct posting to G/L and material at MIRO.
    now procedure is -
    step 1) do GR for 2500MT
    step2) in LIV pay to vendor for 3000MT for that put 500 qty in material tab and the relavent amount.
    in this way loss in transite will be book on inventory.
    regards,
    sujit

  • Address For Customer Services in the

    Hi All,?I bought a Zen Vision:m 60GB in January 2007 and applied for the Free Docking Station under a promotion that they were doing.Sent it off 5 weeks ago Recorded Deli'very. It was signed for at their end, but so far nothing. I've kept a copy of all the paperwork which I intend to send off again, however I can't find an address for their Customer Services Dept in the UK.Can anybody point me in the right direction. Thanks?

    Hi,with me the same thing happened!! Half december I applied for this free docking station (they had the same promotion in the?Netherlands). However I never received anything (it wasn't recorded deli'very). Now the url for this promo isn't functioning anymore. Did anybody receive the docking station?Because I couldn't find an e-mail adress for customer services I just send an e-mail to support. I wonder if?Creative will?reply. If not I?'m afraid?some people at Creative?are misleading customers.

  • Need detailed instructions on how to enable " Check for Updates" option on the Firefox installation directory for Windows XP.

    I have Firefox 2.0 (running Windows XP) and want to update it to 3.6, but the "Check for updates" option on the Help menu is grayed out and need to enable this option by changing permissions on the Firefox installation directory. I need detailed instructions on how to access the Firefox installation directory and change the permissions.
    Can someone please assist?
    Thank you.

    See http://kb.mozillazine.org/Installing_Firefox#Mac_OS_X
    Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
    Trash the current Firefox application to do a clean reinstall.
    Install the new version that you have downloaded.
    Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

  • How can you pay for a card in the apple cards app with an iTunes gift card????

    How can u pay for a apple card with a Itunes gift card.....Please help. Thomas

    are you trying to bye a gift card? or redeem one?

  • Need Advice on How To / Recommended App. for Custom "Word of the Day" Screensaver

    I really like the “Word of the Day” screensaver that comes with OS X 10.8 Mountain Lion.  I would like to either 1.) customize this screensaver with my own dictionary OR 2.) identify an app that I could purchase / download which would allow me to create my own custom “Word of the Day” screensaver. 
    Does anyone have advice on how I can create a custom “Word of the Day” screensaver using my own dictionary?
    Any advise would be greatly appreciated!

    Thank you!
    If you have time for just a couple more questions.  The ultimate goal is have my new flash files in a version (as3) so they can be used as android, html5 and iOs products.
    So would the steps be these?
    Install cs6
    Open SWF files that were created in as2
    (I am assuming by doing this, all the assets will end up in the library which is currently not happening when I import the swf files into Flash CC)
    So now I have the old swf files open in a version of flash that works in as2.
    I understand that as2 is not fully convertible to as3.  But assuming I want to use the assets (graphics and audio) to recreate the animations in as3 can I then save the as2 file as as3 so it would then work with AIR?
    Thanks again?

  • How to make repricing for specific conditions at the time of billing?

    Hello
    I'm SD Pricing person. Let me ask here experts below my concern.
    In EU countries, there is recycling fee in sales of electronics or Note PC with batteries....to keep our earth clean.
    So when customers buy such products, they have to pay more as recycling fee including invoice amount.
    My question is... we want to make repricing for recycling conditions when the billing is created.
    Based on our configuration, recycling condition is not defined as a kind of tax condition.
    So this value is just copied from sales order.
    (pricing type in copy control is 'G' which means repricing for tax condition.)
    In this situation, we want to make repricing for those conditions during operating system.
    Is there any easy way to cover this?
    As I think, this is not easy because the system is already operated.
    To change condition attribution is really risky. If we dare do, we have to migrate all open orders.
    So I want to put this way to the end of my choice.
    For this requirement,
    1. We have to change condition class or category or calculation type in order to be repriced based on pricing type 'G'.
        (ex. Set the condition category as 'I' inter-billing or 'L' always repricing.)
        But transaction data are created now and all open orders will be affected.
    2. To create new conditions are not easy because these conditions are mapped to the CO-PA value field and the values are posted in FI doc.
    3. To change pricing type in copy control is almost impossible because of the impact.
    What can I do this in this situation?
    What I want to do is just to make repricing for specific conditions at the time of billing in case that pricing type of copy control is 'G'.
    Thank you in advance.

    Let me ask agagin to all experts.
    I want to make A condition to be repriced at the time of billing.
    For this, I have to set condition category as 'L' (Generally new when copying).
    But I do not want to do in that way becauuse I am maintaining big operated system now.
    In addition, though I migrate open orders after changing config. as 'L', it is almost impossible for use to migrate because we have more than a thound open orders per a DAY as Globalized system.
    That is why I am asking.
    Simply I can create new condition but as I mentioned, there are various recycling fee so we already created about 10 conditions. And this recycling conditions are linked to REA package of SAP. So creating another 10 more conditions can not be a way for us.
    At last, what I want is not to be shown this condition only in billing doc.
    'A' condition should be displayed in both Sales order and Billing doc.
    And simultaneously, when the billing is created and if user changed 'A' condition master, then new value which is different from sales order have to be reflected in billing doc.
    Thank you in advance.

Maybe you are looking for