LINKSYS WRT54GS WIRELESS ROUTER

hi can anybody tell me if the wrt54gs will work with tiscalli thanks.

I don't think it will sidney, as the Linksys routers do not usually have PPPoA connection types available. You should consider getting yourself a gateway type of device (router + modem)
Frank
"I will graduate on time, no matter how long it takes"

Similar Messages

Hi, I just bought a linksys WRT54G Wireless Router. My...

Hi,
I just bought a linksys WRT54G Wireless Router. My laptop was able to detect it wirelessly untill I changing the "Router Name" in the setup page(http://192.168.1.1)
While saving the settings, the wireless network suddently disconnected. From that point onwards, I was not able to detect the wireless network with any computer at all.
I tried unplugging it, resetting it, and even restory factory settings by holding the reset button for aprox 30 secs.
What is wrong?
Thanks in Advanced

Recheck the wireless setting (SSID, encryption, DHCP, etc) on router management page again. Also make sure your computer's wireless adapter setting matches the one you set on router.
picoHat
Home Network, Wireless Network and Computer Networking Made Easy

Trying to setup my Linksys WRT54G Wireless Router but having trouble.

Right, i will keep this nice and simple. I have had broadband internet for the past 10 days and yesterday i got myself a Linksys WRT54G Wireless router so both myself and my partner can connect our Macbook Pros up to the wireless internet.
But the problem is we cannot seem to connect onto the wireless network. It shows up when searching for internet connecting even when its is open without a password or with a password it does not want to connect?!?!
I can plug my laptop directly (as i am doing now) into the broadband modem and it works so i have no idea what is wrong? This afternoon we tried using a Windows Laptop and had the same problem. The wireless network shows up but when you enter the password that was entered on the 192.168.1.1 website it does not reconise it?!?!
If you can reply speaking English and not too much computer language that would be fantastic.
Many thanks

Hi candn14 and welcome to the forums!
Since internet connection is working fine on the laptop computer when plugged directly into the modem, you just need to configure your router settings.
Are you using a DSL or Cable connection? Please see the links below on how to configure your router with your internet provider (ISP).
Setting-Up a Router with Cable Internet Service
Setting-Up a Router with DSL Internet Service
Once you are finished doing so and your laptop is able to connect to the internet when connected to the modem > router > laptop, then you are now ready to configure the wireless settings of the router for you to be able to connect wirelessly.
Here are the steps:
Setting-Up the Wireless Settings on a Router
And please secure your network w/ a password.
Setting-Up Wireless Security on a Linksys Router
Please feel free to ask any questions again if you encounter any problems. Hope this helps.

I have a Linksys WRT54G wireless router that has a MAC address

A month ago, I could print from my PC and my Mac to my Epson printer over my Linksys WRT54G wireless network. Now, for some reason, I cannot connect and print from either computer. An Epson tech asked me to check the MAC address of the Mac and the printer to see if they were the same. They were not. He then opined that might be why I couldn't print.
I don't know what changed a month or so ago or why it changed. I have not done anything to change the MAC address on either the MAC or the printer.
The Epson guy said the problem might be fixed by adding my printer's MAC address to my router's MAC address. Something about "enabling MAC address filtering". Then he told me that was an issue to pursue with my router manufacturer. Naturally.
Speaking of that problem...someone else had it, too...another technician at another site wrote: "...by default, routers don't come with mac address filtering enabled...and if that's the case....then adding the printer's MAC will not solve any issue that you may be having..."
So, three qustions:
(1) Can I add my Epson Workforce 545 printer's MAC address to my Linksys router? Is that possible?
(2) If I can do it, how do I do it? I saw no "add" or "edit" functions on the Linksys WRT54G Status Page.
(3) What causes MAC address mismatching to happen? What is unstable in that assembly?
Solved!
Go to Solution.

Mac addresses with different devices will differ. No two devices will have the same mac address. this is also called the hardware address. This is designed so that it will serve as a unique identifier of your devices in the network which you can check thru the router. Now it is possible that wireless mac filter might be blocking it from connecting to the network. But it would be best to check as well and make sure that the printer is connected to your network and has the same ip address segment as your router.
How to check if mac filter is enabled:
Setting up wireless MAC Filtering to permit users to connect to the wireless network on your Linksys...
Setting up wireless MAC Filtering to prevent users from connecting to the wireless network on your L...

HP Officejet Pro 8500 wireless Networking with LINKSYS WRT54GS wireless router

I have a HP Officejet Pro 8500 wireless printer conneted via WiFi to my LYNKSYS WRT54GS wireless router. I do not have a USB cable or ethernet cable plugged to the printer. I am able to use the 'scan to email button' and the 'scan to network folder' button on the front of the printer and I can pint from the PC to the printer with no problems.
I installed the HP printer software from the CD, choosing network/wireless connection, without having to install any USB cables from the PC to the printer in the process. many posts in the forum mention having to connect USB cables in the wireless installation process.
Can I install the software in the same fashion on the other two laptops? Or, do I need to do something differently?

The USB cable is used on those printers which do not have display or front panel wireless setup is not possible. We configure the wireless settings during install and save those settings in printer's memory by transferring through USB cable. Therefore the USB is plugged in during wireless installation temporarily. In your case I don't think plugging in USB cable is necessary as the printer is already on network and had IP address. Connect the laptops on wireless network and proceed with regular install, the printer should be detected automatically.
Thanks
Naveen K
HP Support Engineering Center
Click on BLACK STAR button to say thanks
(Although employed by HP, I'm trying to address the issues with my sole willingness and my employer does not bear any liability for my responses)

Persistent problems with Linksys WRT54GS Wireless Router

I'm currently running Vista with a Linksys WRT54GS router. As earlier discussed in this forum I am still having intermittent problems with the ATV taking down my network. Anyone else experienced this and come up with a sure fire fix?
When it's working I like the set up but I have to say, it is not nearly stable enough to be an everyday solution for getting my music and photos to my living room.
Thanks.

Hi, I am having the same problem -- my 2WIRE modem from AT&T recently blew up. So, I purchased the WRT54GS. As soon as I reconnected the AppleTV to the new router via a wireless connection, all of my machines (Mac and PC) lost their internet connections. I'm seriously considering going out and getting another 2WIRE.

Linksys WRT54GS Wireless Router keeps disconnected

Hi, My wireless router WRT54GS keeps on disconnecting without any reason. I have also changed the channel to 11 but still the same issue. It connects for 1 minute and then it stops working even though the signal says "excellent strength" and all the bars are green.

Hmm. I seem to be having a similar problem (see my thread). Check the cable that is pulugged into the back of the computer. That is where my problem lies. The computer doesn't seem to be reading it. If i get some info, ill help you.
EDIT:You have to check the IP address of the computer connected to router. If you are getting an IP of 169.254.x.x, then the router might be defective.
Message Edited by eviluchiha1 on 04-21-2008 02:27 PM

DB Antenna Gain on the WRT54GS Wireless Router?

Anyone know what the dB Antenna Gain is on the Linksys WRT54GS Wireless Router?

The dBm Antenna gain on your Wireless Router is 18dBm.

Linksys WRT54G Wireless-G Router Not working

I have a Linksys WRT54G Wireless-G Router and it has worked good for a couple months and yesterday it stopped. When I plug it in all the lights are lit even though there arent any ethernet cables connected and the power light blinks constantly. I tried holding the reset button on the back and it didnt help. Anyone know whats wrong or anything I can try to fix it?

You need to try again to reset the router to factory defaults.
To reset your router to factory defaults, use the following procedure:
1) Power down all computers, the router, and the modem, and unplug them from the wall.
2) Disconnect all wires from the router.
3) Power up the router and allow it to fully boot (1-2 minutes).
4) Press and hold the reset button for 30 seconds, then release it, then let the router reset and reboot (2-3 minutes).
5) Power down the router.
6) Connect one computer by wire to port 1 on the router (NOT to the internet port).
7) Power up the router and allow it to fully boot (1-2 minutes).
8) Power up the computer (if the computer has a wireless card, make sure it is off).
9) Try to ping the router. To do this, click the "Start" button > All Programs > Accessories > Command Prompt. A black DOS box will appear. Enter the following: "ping 192.168.1.1" (no quotes), and hit the Enter key. You will see 3 or 4 lines that start either with "Reply from ... " or "Request timed out." If you see "Reply from ...", your computer has found your router.
10) Open your browser and point it to 192.168.1.1. This will take you to your router's login page. Leave the user name blank, and in the password field, enter "admin" (with no quotes). This will take you to your router setup page. Note the version number of your firmware (usually listed near upper right corner of screen). Exit your browser.
If you get this far without problems, try the setup disk (or setup the router manually, if you prefer), and see if you can get your router setup and working.
If you cannot get "Reply from ..." in step 9 above, your router is dead.
If you get a reply in step 9, but cannot complete step 10, then either your router is dead or the firmware is corrupt. In this case, use the Linksys tftp.exe program to try to reload your router with the latest firmware. After reloading the firmware, repeat the above procedure starting with step 1.
If you need additional help, please state your ISP, the make and model of your modem, your router's firmware version, and the results of steps 9 and 10. Also, if you get any error messages, copy them exactly and report back.
Please let me know how things turn out for you.

I installed the WRT54G Wireless router on my desktop and...

I installed the WRT54G Wireless router on my desktop and have been using the internet on that pc and my laptop (wirelessly) for a few months. Last week I uninstalled Norton Internet Security and installed ESET Smart Security. Now my desktop cannot get to the internet and the advisor says it does not detect a router. But my laptop says it's connected to my network and I am able to use the intenet on it. The router itself has all of the correct connecions and the appropiate lights are lit. Could the ESET Smart Security Software have messed up my router firmware. Please advise.

there seems to be consistant issues with Linksys routers according to all the posts ive been reading for the past month while i try to fix my on and off again internet connection. its becomming very annoying. i have asked my cable company to replace my modem, which they did and that didn't even help. last year i bought a new linksys router thinking it would solve my problem back then. it did for a while, then my lap top wouldn't connect any, so i sent it into have it checked and it came back with no problems. soooooooooo apparently, while i am connected to my neighbors open connection from his BELKIN ROUTER and even though the signal is very weak............amazingly enough!! i am still online while typing this.......funny eh?? WELL........it seems to me......that i guess i wont be buying linksys anything anymore. Especially after spending hours on the help line (INDIA) trying to reset channels and reset the router box itself. i give up.......i have 2 pieces of crap routers for sale cheap......any takers? dont waste your time

Trouble accessing the internet on a WRT54G wireless router

I’ve run into a problem setting up a wireless network at my friends’ house. The problem is accessing the internet from the wireless PC that has a WMP11 Wireless PCI Card to a WRT54G wireless router.
The wireless PC is running Windows XP and it sees and connects to the router with “excellent” signal strength but will not connect to the internet.
The router is currently set to WEP 128 bit encryption security. I’ve tried disabling the wireless security all together but when I do that the wireless PC no longer sees the router.
I have no trouble connection to the internet thru the wireless network I have set up at my house when I bring his computer there. But my router is an older Linksys 802.11b so maybe that’s why.
Anyone have any ideas what I should try other than telling him to buy a new wireless G adapter card?

If earlier your Wireless Adapter is working fine with the same network & computer .... try upgrading the drivers of the aqdapter .... from http://linksys.com/download .... uninstall the older drivers & reinstall newer drivers ....

WRT54G Wireless Router Problem. Need Help!

I'll start with the basics of my situation and if more details are needed, I will provide to the best of my ability.
I have a comcast cable internet connection. I have 6 computers in my house. Two of them are downstairs (which is where our modem is.) The other four computers are upstairs. All of these computers are Desktop computers with the exception of one laptop.
My laptop (which is Windows XP) can pick up a random wireless signal from the room it is in. I also found out a way to share the internet connection on the computer by going into the properties of my network connection and enabling internet sharing on it. This means if I connect a network cable from my laptop to another computer, I can leech the connection from my laptop and have internet access on the other computer. I also had a switch that I used to connect the other 3 computers upstairs by means of the laptop. The problem was, the laptop was using someone else's wireless connection in the area, and it wasn't strong enough to keep up a constant connection.
I decided, if I can leech someone else's wireless connection, why not have my own. So i recently bought WRT54G Wireless Router and set it up on one of the computers downstairs (because that's where the modem is). It works fine as far as connecting my laptop to the internet from upstairs. My laptop can access the internet through the connection I set up in the LELA program.
Here is the part I am confused about. Everything is plugged in correctly as far as the router is concerned because the laptop can access the internet. But when I connect an ethernet cable directly to one of my other computers (which are Windows Vista, but I didn' t have a problem with it previously when I was leeching someone else's connection), the connection drops on my laptop, and the other computer still can't access the internet. A notice pops up that says its trying to identify the network, but it gives an error that says there is something wrong with the DNS. As soon as I disconnect the ethernet cable connecting my laptop to one of the other computers, the connection is fine again on the laptop. It's only when I connect the computers together that the connection drops.
I just don't understand why it wouldn't work when I created my own network if it worked with another network with no problem. My whole point in getting a wireless router was to have a router within good range to keep up a constant connection on my other computers that aren't in range of the modem downstairs. I just don't know where else to look. I'm not sure if it can be fixed on LELA, manually through my wireless settings, or if it could be a problem with one of my computers' settings. I've tried many different things and I'm not sure what else to do so any help is most definately appreciated. I feel like I've tried everything. I know it's possible because I've one it before, I just need the help because I'm not much of a networking person and I don't know what I should start with to make this work.
Thank you to anyone who can help or even point me in the right direction.

Access router setup page ...Click on the Wireless tab on the Setup page- Here Wireless Network mode should be mixed- Provide any non-linksys name .... Set wireless channel to 11- And wireless SSID broadcast should be Enabled and then click on "Save Settings" >>Now Click on the Sub tab under wireless > "Wireless Security" Change the Wireless security mode to WEP/WPA ...type in the key & click save settings .... >>>>Click on Advanced Wireless settings>>Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304 Change the RTS Threshold to 2304 >>Click on "Save Settings" Check the connection once again & see if it works or not ...

WRT54G Wireless router works on desktop, but not laptop

I have a WRT54G wireless router with version 1.00.4
It works on my desktop, I can log into the net no prob
My laptop however (dell w/ windows xp) does not even recognize it.
Wierd thing is, it worked perfectly with no problems today, I have been going online with my laptop using the wireles router for weeks now..
I haven'tupgraded the firmware, or do anything to any of the computers whatsoever.
When it stopped working, I reset my router/modem, I transfered over my MAC, etc.. but the laptop still does not even recognize my router signal when I try to search for it on my laptop.. It will recognize a handful of other wireless routers from the neighborhood, but not mine.
My desktop is windows xp, and so is my router.
Any helpwould be greatly appreciated.

i had that problem before with the my router and i just did customize the wireless settings. try the the link below, its a great help.
1.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=759&p_created=108422...
2.
http://linksys.custhelp.com/cgi-bin/linksys.cfg/php/enduser/std_adp.php?p_faqid=759&p_created=108422...
hope this will help you...
~ lyf_R_foeittee ;o) ~~

Can I use my WRT54G wireless router as a signal range extender?

Hello, I have a couple wireless routers in my home, and basically I guess I can only use one as the main wireless router.
I'd really like to know if I can use one, specifically my linksys WRT54G wireless G router as just a range extender for the wireless signal from the main wireless router. It would save me a bunch so that I wouldn't need to go buy an entirely new device for this. If there is ANY way.
please help
thank you

You can connect as many WRTs as you like to your network if you wire them together. They create a big roaming network then (or several different networks if you want that). You have to set up the "internal" WRTs as access points, though, i.e. you don't connect them through the Internet port to your network but through a numbered LAN port. Also make sure to turn off the DHCP server on the internal WRTs and to assign them a free LAN IP address in your LAN (usually 192.168.1.2,3,4 will work).
In a roaming network there is no main router. All wireless routers are the same in this respect. Your "main" router is only defined by the fact, that it hosts the internet connection. But from the side of the wireless is does not matter. For a roaming network, make sure to assign all access points the identical SSID and wireless security settings. The only difference in the wireless settings should be the channels, where you should use different ones if possible. 1,6, and 11 are non-overlapping and thus are best to be used.
O.K. This was with a wired connection. If you actually need a wireless bridge, i.e., connect to access points through a wireless connection without any wired connection between them, then you have two options:
1. Buy access points like the WAP54G or wireless bridges like the WET54G. They have can be configured for wireless bridging. A WRT54G with standard Linksys firmware does not have this capability.
2. Get a 3rd party firmware for your WRT54G if there is one available for your hardware version. I think not all hardware versions support 3rd party firmware. Check on the label underneath the router to see what hardware version you have. Search for "WRT54G" on wikipedia. You'll find an article about the different hardware versions, which 3rd party firmware projects exist and where to download it. 3rd party firmware usually adds functions like wireless bridging to a WRT. I know HyperWRT+Thibor works well on my WRT54Gv2. Remember, however, that uploading a 3rd party firmware will void your warrenty...

Playstation 3 Wireless Network Enable Crashes WRT54G Wireless Router

I am trying to set up my wireless connection on my Playstation 3 via my WRT54G wireless router. Whenever I start at the beginning and select Enable for Wireless Connection, the wired end of my router which is attached to my cable modem crashes. My host wired PC loses it internet connection. As I proceed with my Playstation 3 Wireless Network setup, the PS3 can still wirelessly see my router. I do an automatic configuration, but the router is unable to assign a TCP/IP address to the PS3. My main problem is that the PS#crashes my router the moment I even enable the wireless connection. Any ideas?

I don’t think of anything else that a Firmware on this router. Download the latest firmware for this from http://www.linksys.com/download and Upgrade that to your router. Reset and reconfigure it, reduce the MTU to 1365, assign a static IP on PS3 and forward the ports needed by PS3 for this IP address. Now you should able to connect to this router wirelessly.

LINKSYS WRT54GS WIRELESS ROUTER

Similar Messages

Maybe you are looking for