Linksys WUSB6300 - Advanced Settings

Hi, on the Properties sheet for this adapter under the Advanced tab, there is a setting for "BeamCap. The current setting is BEAM Disable. What is this setting and what should it be set to? Thanks!

Hi chrisdx97. These are settings that I don't really normally touch on my adapter's settings unless advised by the manufacturer. I leave them to default and If I am having problem with the connection, I usually just download the latest driver from the website. Are you having any challenge with your adapter?

Similar Messages

Where is Advanced Settings Panel in EA6500

I want to know where I can edit advance settings of my EA6500. Cisco Clout Connect is too basic for my taste.

By design it doesn't have an advanced wireless panel. You can try typing the following link in the address bar of your browser: http://192.168.1.1/Wireless_Advanced.asp or http://myrouter.local/Wireless_Advanced.asp . These link applies to the E4200 router. This might work the same way. Just try it.
Getting to know the Linksys Smart Wi-Fi Router, EA6500
Linksys Smart Wi-Fi Router, EA6500 Frequently Asked Questions

BIOS Advanced Settings in Pavilion NB

Hi,
i need change advanced settings in BIOS, like turn off SMART, because i need restarting computer
many many times in hour and i cant always pushing F1 to ignore SMART warning.
I really need help with this. Is there any BIOS flash wich have advanced settings available ?
How i can turn SMART off or how i can skip message:
1720 - SMART Hard Drive detects imminent failure. Your hard disk drive is detecting an imminent failure. To ensure no data loss, backup contents and replace this hard disk.
without pressing F1 ?
I really need to know !!
PS. I am a technician and i dont need replace HDD ;-)
Thanks for USEFULL answers!!

If you are getting a HDD SMART error, then the PC is saying the HDD is on death row and you need to replace it. It is not safe to your data to continue using the HDD while in this state - it could potentially fail and your data would be thrown into the void.

In the new firefox, the encryption tab in advanced settings is gone. where is it?

I updated my firefox, and suddenly the encryption tab which is in tools, options, advanced settings, is now gone, and there is another tab named "certificates" instead. Where has it moved to?

Yah, except with the new NSA revelations I want to set and/or verify my levels of encryption as I have in the past. Removing all encryption information leaves us all hanging. SSL 3.0 and TSL 1.0 should be on for everyone while SSL 2.0 needs to be off forever. Is this the case? How would I know?
So, no, calling users morons (after reading the blog on this topic) and making a feature available for a purportedly 'only 2%' of users who care is not a sufficient argument. If Mozilla is truly committed to not working with the NSA, then encryption should be identified for all users of Firefox instead of completely hidden from view.
Guess I'll be searching through older versions of Firefox....sigh

I was playing with my ipad settings (it's an older model) and noted in the advanced settings of Safari there was a place to view website databases. When I clicked on this I saw websites. How do these get there and what does the space amount mean?

I was playing with my ipad settings and noted in he advanced settings of Safari there was a place to view "website databases". When I selected this I saw a multitude of websites.
Can anyone tell me how these get there? Can a website be posted even if it was never went to? What does the space amount mean? For example, 1.5 kb...is this quite a bit? Would it indicate someone has gone to a site multiple times?
I share my ipad with my teenage daughter and I'm trying to find out if she's lying to me. Obviously she's swearing that she has "no idea" how these got there and I'm trying to keep her safe (she's only 14).
Thanks everyone.
Concerned Mom

Think of your PC and the 'temporary internet folder' where it keeps cached copies of web pages or elements off a web page for 'quicker display the next time you visit'. That's pretty much what that folder is. 1.5K is tiny. Probably just a basic page with some text on it. (you might be confusing 1.5K with 1.5 megabyte....megabyte is large...it's roughly 1000 kilobytes, so the 1.5K is a tiny file)
As far as I know, the only way info gets into that folder is if the browser has been to that site.
if you have a concern there are browsers out there, McGruff is one i've seen recommended, that allow some degree of parental control and supervision. That or you could passcode lock the iPad or enable the restrictions to turn off some parts of the device to have some control.

How can I set defaults in the TestStand's step settings Labview Advanced Settings tab to run a VI on a remote PC?

I am accessing a VI many times which is run on a remote PC.
When I click Step Settings, click on the Module tab, then click on the Labview Advanced Settings, there is are options for running a VI on a remote PC.
An annoyance is having to enter the remote host, remote VI path, port number and timeout settings every time I created a step to call the VI in the tests. These are a constant, or at least the rule by far rather than the exception. The TestStand step settings default is the VI does not run on a remote PC (unticked) and there are of course no IP addresses etc as defaults. So if I make a minor change to the tests such as the remote VI location, I have to manually change it is every occurrence of the VI being called. This is very time consuming and is prone to human error.
Is there a way I can preset these settings so that every time I call a Labview module, these defaults are invoked without me having to set them every time?
I guess a workaround is to have the VI run in a subsequence, so that the settings are made just once, but I would prefer not to have to do that.
regards to the NI community,
Dave
Solved!
Go to Solution.

Hi,
What you can do if you are using TS4.x is create your first step, then add it to the Template List. Then use the step from the template list when you require similar steps. See User Manual Chapter 3-6.
Regards
Ray Farmer
Regards
Ray Farmer

ITunes Media Folder location can't be changed in Advanced Settings

I used to keep the iTunes Media Folder on an external hard drive. Now I copied the iTunes folder to the default location on my local hard drive. Once I changed the folder location in the Advanced Settings to the default settings everything worked fine for a week. Suddenly iTunes can no longer find the files unless I connect my old external hard drive. Reveal in Finder shows that iTunes is still looking at the old folder location despite the change to the local hard disk location in Advanced Settings. I tried changing the Advanced Settings folder locations back and forth but iTunes keeps pointing to the old external hard drive. Software Update is up to date. What can I do? Thanks.

I just looked at the "iTunes Music Library.xml" file with TextEdit. There are references to the external hard drive everywhere. It appears that the path to the iTunes Media folder just does not reflect the location selected in Advanced Settings.

Advanced Settings not saved

There seems to be a bug in the Contribute Software, at least
on my version. I am having to program all my advanced settings
twice, once before I publish and once after I publish.
For example, all my HREF settings default to referential
links (instead of absolute links) and all my target settings
default to the default window (instead of my setting to open a new
window) after I publish. I can fix it, but only by going back into
the edit function, reselecting it, and then republishing.
As you can imagine, this is really annoying and time
consuming. Do you know why this is happening and how it can be
fixed?

Hi,
Could you please let me know the version of Contribute that
you are using?
Thanks,
Radhika

Advanced Settings do not stick!!!

Why do my "Advanced" settings change or come unchecked!! It is getting quite annoying. I check the box to remove ALL emails from server "right away". days later, all of a sudden all the same emails from the morning come down AGAIN. I go to my settings and sure enough, the box is unchecked. What up with this??? Also, getting annoyed with the need to check mail again before it will allow me to send a new message. HELP!!

For the first problem, it sounds like there might be some minor corruption to the Mail.app preference file.
Regarding the second problem, does your ISP or email account provider require POP before SMTP authentication which means you must login and check the account's incoming mail server for new mail before you can use the account's SMTP server to send mail but this should only be required once per login session (without quitting the Mail.app) and not each time you send a message. Has this always occurred or a recent change?
To target the Mail.app preference file, do the following:
All account information is stored in the Mail.app preference file located at Home > Library > Preferences > com.apple.mail.plist.
Unless you have a backup copy of the preference file that is working properly, this will require re-entering all email account information.
With the Mail.app quit and using the Finder, go to Home > Library > Mail. Copy the Mail folder and place the copy on the Desktop for backup purposes.
Using the Finder, go to Home > Library > Preferences > com.apple.mail.plist. Move the com.apple.mail.plist file to the Desktop.
Launch Mail and decline any prompt to import mailboxes. After re-entering all email account information the same as before, the Mail.app should rediscover the existing account named folder(s) and mailboxes at Home > Library > Mail.
If you have a .Mac account, the .Mac account information will be re-entered automatically. If you don't have a .Mac account, the email account you provided as part of the setup assistant will also be entered automatically. If so and you no longer use this account, you can delete the account from within Mail.
After confirming all mailboxes were successfully rediscover, you can delete the copy of the Mail folder and old com.apple.mail.plist file from the Desktop.
I've been using the Mail.app exclusively since Jaguar was introduced, thru Panther and now Tiger and although I've never experienced a problem with the Mail.app preference file, I include the preference file as part of my regular backup.
You only need to replace the backup copy after making any changes to account information or after deleting or adding a new account.
If this occurs again (which it shouldn't be a regular occurance), you'll have a good working backup copy of the com.apple.mail.plist file to replace the existing without having to re-enter all email account information again.

Flash Player 9 crashes my browser when I open advance settings

Hi, I'm using the newest version of Flash (9,0,115,0) and
when I try to access the advanced settings and click the webcam
tab, both my browsers crash (IE and Firefox2).
The screen I am talking about is:
http://www.macromedia.com/support/documentation/en/flashplayer/help/help09.html
I can click on any other parts of the tab, but it only
crashes when I click on the webcam icon. This is weird, because the
mic tab recognizes my webcam (Microsoft LifeCam VX-3000).
Anyone know of a solution to this?
I am on a Dell E1705, Centrino Duo 1.67ghz, 1GB Ram and
nVidia GeForce 7900GS

highonfire, please open a technical support case for this
issue:
http://www.adobe.com/support
(you can only open a webcase for Flash Player.... )
It woul also be interesting to see what happens if you
uninstall your cam and it's drivers and retest..
Another thing you can do (if you're the admin on the machine)
is create a new user profile.. Log in as that user, install the
browser of your choice and your cam drivers and test with just that
user profile.
If you can do those test please provide that information to
the agent who handles the web case.

How do I change my old icloud e mail under advanced settings?

How do I change my old icloud email under advanced settings? Can anyone help me? I am ready to run my ipad over!!

In what advanced settings? Which app?
You can't change the main email address belonging to your iCloud account, if that's what you're trying to do. You would have to create an entirely new iCloud account from scratch.
Or are you trying to create an 'email alias'. You can have up to three of these - they are additional addresses (not accounts) which deliver into the sam inbox as your main address. Please see:
http://help.apple.com/icloud/#mm6b1a490a
Note that new aliases will be @icloud.com. not @me.com.

Dreamweaver Help | Version Control and Advanced settings

This question was posted in response to the following article: http://helpx.adobe.com/dreamweaver/using/version-control-advanced-settings.html

FlashBanger wrote:
Why am I getting an "Image is not inside the site." alert?
It could be because you haven't defined/setup your site. In DW you always need to define a site before you can do anything. I suggest read this part 1 tutorial to get the idea.

Website data in advanced settings for websites never visited

How is it possible for website data to be recorded in advanced settings without visiting a website? Would other websites visited have to be related content popups? If the iphone 6 plus was used as a hot spot, can other users actions be recorded on the hot spot phone? Phone is automatically locked after short time. This user has visited sites previously on a previous iphone but not the phone in question

In addition to the server (site) that you navigate to, any inserted material on that site that is actually on another server would also be recorded, including images, embedded videos, ads, and other embedded content. Website data for another device using the phone as a hotspot will not be captured on the phone.

Mail error "Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"

The Mail application has suddenly started giving error:
"Verify that you have addressed this message correctly. Check your SMTP server settings in Mail preferences and verify any advanced settings with your system administrator.Select a different outgoing mail server from the list"
It was working fine till yesterday, suddenly it stopped. I have 3 email accounts configured here, 2 are on exchange servers and one yahoo. Connection verification works and shows all servers as green.
Any inputs?

I had 3 accounts, 2 ms exchange accounts and 1 yahoo. After removal of yahoo, everything is back to normal.
Regards
Rohit

Advanced Settings for characteristics in QD

Hi,
It should be possible to reach "Advanced" - Settings by double click on a characteristic in Query Designer
(e.g. switch display in BexAnalyzer from posted values to master data).
What settings in BI (?) have to be maintained to do so? (7.0)
BR,
Thorsten

Yes in Query designer.
Select the characteristic where you want to change it, and then select on the right in the property screen 'advanced' > there you can change it...
you can check your version by clicking on the yellow question-mark at the top...
wait a minute...
which frontend tool-version are you using? 3.5 or 7.0? (my explanation is for 7.0 but I think you are on 3.5...
Ciao
Joke

Linksys WUSB6300 - Advanced Settings

Similar Messages

Maybe you are looking for