Linux 10g AS new install: Forms services not running [solved]

In the 10g OEM Application Server Control, the System Components item for Forms has the check box disabled and Forms Status is "Down".
No one here has OAS Admin education or experience. Can you point me in the right direction please?
Thank you.
Message was edited by:
New Rodeo

Maybe starting the OC4J is a good idea ....
Source the valid AS environment, then issue :
$ORACLE_HOME/opmn/bin/opmnctl status
You will probably notice that the OC4J is not running ...
in this case issue :
$ORACLE_HOME/opmn/bin/opmnctl startporc ias-component=OC4J

Similar Messages

SCOM 2012 Linux Monitoring - RPCBIND, RPCIDMAP, RPCSTAT services not running

We are running SCOM 2012 SP1 and added a test Linux server running Red Hat Enterprise 6.3. SCOM is reporting that the server is in Critical health because the following three services are not running.
1) Process Rpcbind Service Health - Rpcbind Mapper Not Running
2) Process Rpcidmap Service Health - NFSv4 ID Name Mapper Not Running
3) Process Rpcstat Service Health - NSM Status Monitor Not Running
My question is that are these services required to be running in order for SCOM to monitor the Linux servers properly? If yes, can you please give brief explaination as to why so I can explain that to our Linux Administrator. The Linux Administrator
is saying that we do not run these services on any of the Linux servers because they are not needed. If infact these services are not needed, how can I have SCOM ignore the critical error messages? Thanks

Yup, generally running. I'm assuming you've done a basic install of RHEL 6. All processes listed above are enabled by default on a RHEL 6 install if you take the default settings. If someone is just getting started you can pretty much guarantee
they will do a basic install of RHEL 6 and this will not be an issue.
Could it be done better... sure but at what point do you stop? We could discover all services running on the system and start monitoring them out of the box but what are important and what are not to each customer? The idea is to give you some basic monitoring
on a default install based on what each OS provider starts on a "default" install. If this does not suite your needs SCOM is very configurable and adding a custom service monitor is very easy to configure along with disabling existing ones.
If you'd like to provide feedback on this feel free to open a support ticket with Microsoft and file what we call a 'Design Change Request' [DCR]. We go though these prior to starting each update to SCOM. No guarantee it will get fixed/changed as we do have
priorities but we are listening.
Regards,
-Steve

[mostly solved] Strigi service not running

Hello,
Since I am constantly fluctuating between a rich and a minimalistic desktop environment, I'm trying out KDE once again. The Soprano/Nepomuk/Strigi stuff seems really interesting but I fail at using it.
When I go to System Settings -> Advanced -> Desktop Search it says "Strigi service not running". While Nepomuk is activated, I can't activate Strigi. When I set the checkbox for Strigi and apply, the message is still there. When I close the widow and go back again, the checkbox is deactivated again.
The searchbar in dolphin never finds anything and there is no interface for tagging or commenting files.
However, I can index files and find stuff when I run strigiclient.
What may the problem be?
Thanks,
Viv
Last edited by V for Vivian (2010-06-30 07:48:54)

Steigi seems to be installed.
viv ~ $ pacman -Q strigi
strigi 0.7.2-2
I'm considering a clean Chakra installation but this seems kind of unaesthetic and stupid.
edit01: I've just renamed my .kde4 folder and restarted KDE. Now Strigi is indexing and I can tag files, everything works. Some kind of configuration seems to have been wrong. I think I can figure this out.
edit02: I had to replace the .kde4/share/apps/nepomuk folder with a clean one, maybe something with the database or how it is accessed. Don't have time to go into this right now, I'm just happy it works now.
Last edited by V for Vivian (2010-06-30 08:16:11)

Premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden."

premiere elements 12, new installation, serial no. accepted, installation completed and new started, but does not run. I get following msg-box: "LoadLibrary failed with error 126: Das angegebene Modul wurde nicht gefunden." Installation in German Language on WIN7 professional 64bit, Samsung SSD. What can I do to run that program?

Jurgen Freund
Premiere Elements 12 on Window 7 64 bit. What video card/graphics card does your computer use - AMD Radeon?
I have found this YouTube video on the subject of Error 126 with details for resolving the problem.
How to fix the ERROR 126 when you open OpenGL programs - YouTube
The link was contributed in an old 2013 thread here by the ID danneomarre (see post 6 of the following thread)
LoadLibrary failed with error 126: cant find the required
Please let us know if that worked for you.
Thank you.
ATR
Add On...When all is OK and working, please update 12 to 12.1 Update using an opened project's Help Menu/Update.

Please i need help the forms are not running

the forms are not running by internet exp and i am trying all of things , then i am working now with Firefox and the problem still running and the error is additional plugins are required to display all the media in this page
what can i do to running forms correct
Message was edited by:
user616145

i could not understand ur prob. clearly. U run form from application server or just using oracle oc4J of oracle 10gDS in ur local machine? When u run ur form what kind of error u see?
- tkarim

Auto-start services not running :Shell Hardware Detection in my Health Reports

Recently I've setup up Windows Server 2012 Essentials on my Custom-made Box. All is going well so far except that i have a warning in my generated Health Report such as
Auto-start Services Not Running Shell
Hardware Detection.
I had checked My Services and found out that this particular service is scheduled to start Automatically and it is always started...
Any Advice what might be the problem?

Susan, can you still see the Connect bug? What Product/Program is it under in Connect? I can't see it but I might not be a member of the correct group.
From http://technet.microsoft.com/en-us/library/hh831394.aspx:
"After a server has been added to the Server Manager server pool, service alerts about the Shell Hardware Detection service can be displayed if there are no users logged on to the managed server. This occurs because the Shell Hardware Detection service runs
only when users are logged on to the managed server, or connected to a Remote Desktop session on the managed server. To avoid seeing Shell Hardware Detection service alerts for this case, click
Services in the thumbnails for server groups, including the
All Servers group. In the Services Detail View dialog box, on the
Services drop-down list, clear the check box for Shell Hardware Detection, and then click
OK."
That confirms that it's okay for Shell Hardware Detection not to be running. However the suggested fix--removing it from 2012 alerting--does not keep it off my 2012E Health Report.
Mark Berry
MCB Systems

Diagnostics policy service not running on Windows 7 home premium

I'm unable to connect to internet through wireless connectionsr . it says limited access to wi-fi router. When i try to fix this it says diagnostics policy service not running. Checked services.msc While the type is set up to automatic Unable to start the
service. I had similar problem with my LAN connection. After resetting my LAN connection i was able to connect to internet. Tried this on wifi as well but the issue remains.
Error code is 5: access denied

Hi,
Thanks for the post!
Go to your Device Manager and uninstall the network device, including the wireless network card, then restart the computer. Let the system automatically reinstall the driver for you. You can also manually update the network card driver to the latest one.
After that, check if you can connect to the internet.
For the Diagnostics policy service issue. please click Start, input regedit in the search box, press Enter to open your Registry Editor, navigate to the key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS\Parameters.
Right click this key, choose permission, click the user "Trustedinstaller", ensure the permission is set to "Full Control" and "Read". Then click OK to apply the change.
Restart the computer to check if this service is working now.
Regards,
Miya
This posting is provided "AS IS" with no warranties, and confers no rights. | Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer
your question. This can be beneficial to other community members reading the thread.

The Data access service not running or not yet initialized.

Hello guys ,
i am getting the following error wen tryin to open the console The Data access service not running or not yet initialized. on scom 2012 R2 before it was working fine but once i closed the console and open got the error
OS : Windows 2012r2 patched and scom 2012 r2
sql : 2012 r2 enuff database size
tried few things as :
1. change the account to domain admin for system center data acess service still no luck
2. created registry keys for servicepipetimeout to 6000 bt still nit working
3. Refresh sql account used for sccom data aceess service still no luck
4. the service disappears as running after 30 seconds and the console is unable to open
kindly help if some perfect resolution as lot of time has been wasted and need to meet deadlines.
thanks guys in advance
Basit Siddiqui
AIG

Check that following:
Verify permission of SCOM Account on sysadmin and OM DB.
Check firewall that is disable
Check antivirus that didn't block scom folders or services.
Check SQL services is running
Check Space of database at 5 GB as you configured. It is best practice to set the db size at a reasonable size and not to set to autogrowth.
Also you can check below link
http://vmajmudar.blogspot.com/2013/07/the-data-access-service-is-either-not.html
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"Mai Ali | My blog:
Technical | Twitter:
Mai Ali

Window search service not running

window search service not running how i can fix it?
This question was solved.
View Solution.

Hi,
From the Desktop, hold down the Windows key and press

Windows Modules Installer - Autostart Service Not Running

I'm receiving in my health reports for four separate WSE 2012R2 deployments the below error. I've set the service to restart upon failure, but it seems this occurs upon every server reboot until I manually go in and start the service. However,
from my understanding this service only runs when it is needed, which would leave me to a false negative in the BPA scan.
Just curious if anyone else is getting this.
Autostart Services Not Running:
Windows Modules Installer

Hi MattSla,
On current situation, please type services.msc in RUN to open Services panel. Then navigate to Windows Modules
Installer service and open Properties. In General tab, please check Startup type of this service. Did set as Manual? Meanwhile, in Log On tab, please check which account this service used to log on as? Did log on as Local System account?
I check the Windows Modules Installer service in two Windows Server 2012 R2 Essentials in my Lab environment.
It seems that this service was set as Manual. Then Generate a Health Report in Dashboard, and didn’t find any error which was related to ‘Autostart Service Not Running’.
If this issue still exists, please open Event Viewer and check if find some relevant events. Those may help
us to go further analyze.
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

[SOLVED] Disk full errors on new install despite disk not being full

Hi,
I just installed Arch on my Thinkpad laptop as a way of trying out the distro. I followed the Beginner's Guide quite closely and used the latest install medium. My system is up to date.
However, I did diverge a bit from the beaten path, as I re-used an old LVM-on-LUKS setup from the previous installation (Debian). It took a while to figure out how to make it work, but I managed and yesterday the machine seemed to run fine. Basically, my modifications to the default setup is adding encrypt and lvm to hooks in mkinitcpio.conf, and adding a kernel command line to decrypt my LUKS device containing the LVM volume to /etc/defaults/grub (this was tricky to figure out, by the way, since all documentation I could find spoke of the now-deprecated rc.conf). All that seems to work fine; the computer now boots and mounts root as expected.
However, today when I started the laptop, I noticed that the password dialog in GDM wouldn't load. When I looked into the logs, I found that I had mostly the same problems as described in this thread, but the strange thing is that I'm not low on disk space:
deanna% df
Filesystem 1K-blocks Used Available Use% Mounted on
rootfs 303565176 17339120 270805848 7% /
dev 953648 0 953648 0% /dev
run 957312 488 956824 1% /run
/dev/mapper/deanna-root 303565176 17339120 270805848 7% /
tmpfs 957312 96 957216 1% /dev/shm
tmpfs 957312 0 957312 0% /sys/fs/cgroup
tmpfs 957312 212 957100 1% /tmp
/dev/sda1 240972 34562 193969 16% /boot
So I thought I'd run into some bug, but then it turned out that systemctl scripts started complaining about lack of disk space, and then I got concerned:
deanna% sudo systemctl start gdm.service
Error: No space left on device
deanna% sudo systemctl status gdm.service
gdm.service - GNOME Display Manager
Loaded: loaded (/usr/lib/systemd/system/gdm.service; enabled)
Active: active (running) since Thu, 2012-12-20 11:17:03 CET; 41s ago
Main PID: 1964 (gdm-binary)
CGroup: name=systemd:/system/gdm.service
├─1964 /usr/sbin/gdm-binary
├─1968 /usr/lib/gdm/gdm-simple-slave --display-id /org/gnome/DisplayManager/Displays/_0
├─1971 /usr/bin/Xorg :0 -background none -verbose -auth /var/run/gdm/auth-for-gdm-ZOCjk8/database -seat se...
├─1981 gdm-session-worker [pam/gdm-launch-environment]
└─2051 gdm-session-worker [pam/gdm-password]
Dec 20 11:17:03 deanna systemd[1]: Starting GNOME Display Manager...
Dec 20 11:17:03 deanna systemd[1]: Started GNOME Display Manager.
Dec 20 11:17:04 deanna gdm-simple-slave[1968]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Dec 20 11:17:17 deanna gdm-password][2051]: AccountsService-WARNING: Failed to monitor logind session changes: No spac...device
deanna%
Any help debugging would be greatly appreciated. Also, I may have missed something since I'm new to Arch. Not a new GNU/Linux user however, so you'd think I'd not manage to blow everything up.
Last edited by albins (2012-12-28 13:56:30)

No:
deanna% df -h
Filesystem Size Used Avail Use% Mounted on
rootfs 290G 17G 259G 7% /
dev 932M 0 932M 0% /dev
run 935M 516K 935M 1% /run
/dev/mapper/deanna-root 290G 17G 259G 7% /
tmpfs 935M 76K 935M 1% /dev/shm
tmpfs 935M 0 935M 0% /sys/fs/cgroup
tmpfs 935M 216K 935M 1% /tmp
/dev/sda1 236M 34M 190M 16% /boot
Also, I just dd:d up a 1.5 GB file from /dev/zero into my home directory without any problems.
Last edited by albins (2012-12-21 08:48:35)

New install lightdm does not start

I've installed arch and not much past that point. After troubles with lightdm I installed gnome and used 'systemctl enable gdm' and gdm worked after my reboot. Anyway, more info on my lightdm problem.
Steps to install
pacman -S lightdm
pacman -S lightdm-gtk3-greeter
systemctl enable lightdm
reboot
Upon reboot screen flashes a couple of times and then stops.
I had installed xfce4 prior to this and made sure the xfce4.desktop file existed. I've looked up other posts and I have not had look implementing their solutions. Any ideas?
DEBUG: Started session 395 with service 'lightdm-greeter', username 'lightdm'
DEBUG: Session 395 authentication complete with return value 0: Success
DEBUG: Greeter authorized
DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
DEBUG: Session 395 running command /usr/bin/lightdm-gtk-greeter
DEBUG: Greeter closed communication channel
DEBUG: Session 395 exited with return value 1
DEBUG: Greeter quit
DEBUG: Failed to start greeter

My Lightdm stopped working a few days ago after an update.
tschertel wrote:I've fixed it going to /var/lib then "chown lightdm.lightdm lightdm/"
This doesn't work for me.
[+0.00s] DEBUG: Logging to /var/log/lightdm/lightdm.log
[+0.00s] DEBUG: Starting Light Display Manager 1.6.1, UID=0 PID=1230
[+0.00s] DEBUG: Loaded configuration from /etc/lightdm/lightdm.conf
[+0.00s] DEBUG: Using D-Bus name org.freedesktop.DisplayManager
[+0.00s] DEBUG: Registered seat module xlocal
[+0.00s] DEBUG: Registered seat module xremote
[+0.00s] DEBUG: Adding default seat
[+0.00s] DEBUG: Starting seat
[+0.00s] DEBUG: Starting new display for greeter
[+0.00s] DEBUG: Starting local X display
[+0.00s] DEBUG: Could not run plymouth --ping: Failed to execute child process "plymouth" (No such file or directory)
[+0.00s] DEBUG: Using VT 7
[+0.00s] DEBUG: Activating VT 7
[+0.01s] DEBUG: Logging to /var/log/lightdm/x-0.log
[+0.01s] DEBUG: Writing X server authority to /run/lightdm/root/:0
[+0.01s] DEBUG: Launching X Server
[+0.01s] DEBUG: Launching process 1234: /usr/sbin/X :0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+0.01s] DEBUG: Waiting for ready signal from X server :0
[+0.01s] DEBUG: Acquired bus name org.freedesktop.DisplayManager
[+0.01s] DEBUG: Registering seat with bus path /org/freedesktop/DisplayManager/Seat0
[+0.48s] DEBUG: Got signal 10 from process 1234
[+0.48s] DEBUG: Got signal from X server :0
[+0.48s] DEBUG: Connecting to XServer :0
[+0.48s] DEBUG: Starting greeter
[+0.49s] DEBUG: Started session 1241 with service 'lightdm-greeter', username 'lightdm'
[+0.49s] DEBUG: Session 1241 authentication complete with return value 0: Success
[+0.49s] DEBUG: Greeter authorized
[+0.49s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
[+0.49s] DEBUG: Session 1241 running command /usr/sbin/lightdm-gtk-greeter
[+0.53s] DEBUG: Greeter connected version=1.6.1
[+0.53s] DEBUG: Greeter connected, display is ready
[+0.53s] DEBUG: New display ready, switching to it
[+0.53s] DEBUG: Activating VT 7
[+0.66s] DEBUG: Greeter start authentication for lipek
[+0.66s] DEBUG: Started session 1261 with service 'lightdm', username 'lipek'
[+0.67s] DEBUG: Session 1261 got 1 message(s) from PAM
[+0.67s] DEBUG: Prompt greeter with 1 message(s)
[+5.21s] DEBUG: Continue authentication
[+5.24s] DEBUG: Session 1261 authentication complete with return value 0: Success
[+5.24s] DEBUG: Authenticate result for user lipek: Success
[+5.24s] DEBUG: User lipek authorized
[+5.24s] DEBUG: Greeter sets language pl_PL.utf8
[+5.25s] DEBUG: Greeter requests session gnome
[+5.25s] DEBUG: Using session gnome
[+5.25s] DEBUG: Stopping greeter
[+5.25s] DEBUG: Session 1241: Sending SIGTERM
[+5.25s] DEBUG: Greeter closed communication channel
[+5.25s] DEBUG: Session 1241 exited with return value 0
[+5.25s] DEBUG: Greeter quit
[+5.26s] DEBUG: Dropping privileges to uid 1000
[+5.26s] DEBUG: Calling setresgid
[+5.26s] DEBUG: Calling setresuid
[+5.26s] DEBUG: Restoring privileges
[+5.26s] DEBUG: Calling setresuid
[+5.26s] DEBUG: Calling setresgid
[+5.26s] DEBUG: Dropping privileges to uid 1000
[+5.26s] DEBUG: Calling setresgid
[+5.26s] DEBUG: Calling setresuid
[+5.26s] DEBUG: Writing /home/lipek/.dmrc
[+5.33s] DEBUG: Restoring privileges
[+5.33s] DEBUG: Calling setresuid
[+5.33s] DEBUG: Calling setresgid
[+5.36s] DEBUG: Starting session gnome as user lipek
[+5.36s] DEBUG: Session 1261 running command /etc/lightdm/xsession gnome-session
[+5.38s] DEBUG: Registering session with bus path /org/freedesktop/DisplayManager/Session0
[+5.38s] DEBUG: Session 1261 exited with return value 0
[+5.38s] DEBUG: User session quit
[+5.38s] DEBUG: Stopping display
[+5.38s] DEBUG: Sending signal 15 to process 1234
[+5.77s] DEBUG: Process 1234 exited with return value 0
[+5.77s] DEBUG: X server stopped
[+5.77s] DEBUG: Removing X server authority /run/lightdm/root/:0
[+5.77s] DEBUG: Releasing VT 7
[+5.77s] DEBUG: Display server stopped
[+5.77s] DEBUG: Switching to greeter
[+5.77s] DEBUG: Starting new display for greeter
[+5.77s] DEBUG: Starting local X display
[+5.77s] DEBUG: Using VT 7
[+5.77s] DEBUG: Logging to /var/log/lightdm/x-0.log
[+5.77s] DEBUG: Writing X server authority to /run/lightdm/root/:0
[+5.77s] DEBUG: Launching X Server
[+5.77s] DEBUG: Launching process 1271: /usr/sbin/X :0 -auth /run/lightdm/root/:0 -nolisten tcp vt7 -novtswitch
[+5.77s] DEBUG: Waiting for ready signal from X server :0
[+6.22s] DEBUG: Got signal 10 from process 1271
[+6.22s] DEBUG: Got signal from X server :0
[+6.22s] DEBUG: Connecting to XServer :0
[+6.22s] DEBUG: Starting greeter
[+6.22s] DEBUG: Started session 1276 with service 'lightdm-greeter', username 'lightdm'
[+6.22s] DEBUG: Session 1276 authentication complete with return value 0: Success
[+6.22s] DEBUG: Greeter authorized
[+6.22s] DEBUG: Logging to /var/log/lightdm/x-0-greeter.log
[+6.22s] DEBUG: Session 1276 running command /usr/sbin/lightdm-gtk-greeter
[+6.26s] DEBUG: Greeter connected version=1.6.1
[+6.26s] DEBUG: Greeter connected, display is ready
[+6.26s] DEBUG: New display ready, switching to it
[+6.26s] DEBUG: Activating VT 7
[+6.40s] DEBUG: Greeter start authentication for lipek
[+6.40s] DEBUG: Started session 1296 with service 'lightdm', username 'lipek'
[+6.40s] DEBUG: Session 1296 got 1 message(s) from PAM
[+6.40s] DEBUG: Prompt greeter with 1 message(s)
** (process:1276): WARNING **: Failed to open CK session: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.ConsoleKit was not provided by any .service files
(lightdm-gtk-greeter:1278): Gtk-WARNING **: Theme parsing error: gtk.css:72:18: Not using units is deprecated. Assuming 'px'.
(lightdm-gtk-greeter:1278): Gtk-WARNING **: Theme parsing error: gtk.css:72:20: Not using units is deprecated. Assuming 'px'.
** (lightdm-gtk-greeter:1278): WARNING **: Failed to open sessions directory: Error opening directory '/usr/share/lightdm/remote-sessions': No such file or directory
** (lightdm-gtk-greeter:1278): WARNING **: Failed to load user image: Failed to open file '/home/lipek/.face': Permission denied
** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XKeyboardLayouts
** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XHasMessages
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type: assertion `value != NULL' failed
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_type_is_subtype_of: assertion `g_variant_type_check (type)' failed
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type_string: assertion `value != NULL' failed
** (lightdm-gtk-greeter:1278): WARNING **: Unexpected accounts property type for XHasMessages: (null)
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_unref: assertion `value != NULL' failed
** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XKeyboardLayouts
** (lightdm-gtk-greeter:1278): WARNING **: Could not get accounts property XHasMessages
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type: assertion `value != NULL' failed
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_type_is_subtype_of: assertion `g_variant_type_check (type)' failed
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_get_type_string: assertion `value != NULL' failed
** (lightdm-gtk-greeter:1278): WARNING **: Unexpected accounts property type for XHasMessages: (null)
(lightdm-gtk-greeter:1278): GLib-CRITICAL **: g_variant_unref: assertion `value != NULL' failed
Any ideas?
Last edited by LiPeK (2013-09-13 21:55:51)

SMS client service not running - cant find package to install in TS

I am running into some problems with getting a completed TS, the majority completes until I get to the point of installing the Lenovo Driver Applications.
I have set them up as a package, which runs a .vbs
This worked fine from SCCM 2007
I get error stating that the content cannot be found, and there as a failure that the SMS Client Service is not running.
Task sequence looks like this
The sms client service is not running.   InstallSoftware   1/29/14 2:22:31 PM   2484 (0x09B4)
TS::Utility::GetCcmExecPid(dwServerPid), HRESULT=87d00215 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\installsoftware.cpp,826)   InstallSoftware   1/29/14 2:22:31 PM   2484 (0x09B4)
IsServerConnected(bConnected), HRESULT=87d00215 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\installsoftware.cpp,891)   InstallSoftware   1/29/14 2:22:31 PM   2484 (0x09B4)
WaitforJobCompletion(spExecReqMgr), HRESULT=87d00215 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\installsoftware.cpp,796)   InstallSoftware   1/29/14 2:22:31 PM   2484 (0x09B4)
Entering ReleaseSource() for C:\_SMSTaskSequence\Packages\CA10008D   InstallSoftware   1/29/14 2:22:31 PM   2484 (0x09B4)
reference count 1 for the source C:\_SMSTaskSequence\Packages\CA10008D before releasing   InstallSoftware   1/29/14 2:22:31 PM   2484 (0x09B4)
Released the resolved source C:\_SMSTaskSequence\Packages\CA10008D   InstallSoftware   1/29/14 2:22:31 PM   2484 (0x09B4)
pInstall->Install(sPackageID, sProgramName), HRESULT=87d00215 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,361)   InstallSoftware   1/29/14 2:22:31 PM   2484 (0x09B4)
Install Software failed, hr=0x87d00215   InstallSoftware   1/29/14 2:22:31 PM   2484 (0x09B4)
Process completed with exit code 2278556181   TSManager   1/29/14 2:22:31 PM   1864 (0x0748)
!--------------------------------------------------------------------------------------------!   TSManager   1/29/14 2:22:31 PM   1864 (0x0748)
Failed to run the action: Install T510 Apps.
Item not found (Error: 87D00215; Source: CCM)   TSManager   1/29/14 2:22:31 PM   1864 (0x0748)
MP server http://CA1AP03P.CAMECO.COM. Ports 80,443. CRL=false.   TSManager   1/29/14 2:22:31 PM   1864 (0x0748)
Setting authenticator   TSManager   1/29/14 2:22:31 PM   1864 (0x0748)
Set authenticator in transport   TSManager   1/29/14 2:22:31 PM   1864 (0x0748)
Sending StatusMessage   TSManager   1/29/14 2:22:31 PM   1864 (0x0748)
Setting message signatures.   TSManager   1/29/14 2:22:31 PM   1864 (0x0748)
Setting the authenticator.   TSManager   1/29/14 2:22:31 PM   1864 (0x0748)
CLibSMSMessageWinHttpTransport::Send: URL: CA1AP03P.CAMECO.COM:80 CCM_POST /ccm_system/request   TSManager   1/29/14 2:22:32 PM   1864 (0x0748)
Request was succesful.   TSManager   1/29/14 2:22:32 PM   1864 (0x0748)
Set a global environment variable _SMSTSLastActionRetCode=-2016411115   TSManager   1/29/14 2:22:32 PM   1864 (0x0748)
Set a global environment variable _SMSTSLastActionSucceeded=false   TSManager   1/29/14 2:22:32 PM   1864 (0x0748)
Clear local default environment   TSManager   1/29/14 2:22:32 PM   1864 (0x0748)
Let the parent group (Install Device Applications) decides whether to continue execution   TSManager   1/29/14 2:22:32 PM   1864 (0x0748)
Let the parent group (Setup Operating System and Applications) decide whether to continue execution   TSManager   1/29/14 2:22:32 PM   1864 (0x0748)
The execution of the group (Setup Operating System and Applications) has failed and the execution has been aborted. An action failed.
Operation aborted (Error: 80004004; Source: Windows)   TSManager   1/29/14 2:22:32 PM   1864 (0x0748)
Failed to run the last action: Install T510 Apps. Execution of task sequence failed.
Item not found (Error: 87D00215; Source: CCM)   TSManager   1/29/14 2:22:32 PM   1864 (0x0748)
Full SMSTS.Log located here
https://skydrive.live.com/redir?resid=DF018345C62C41DB!114&authkey=!ACpUtQ2EN51FNAk&ithint=file%2c.log
The .vbs for installing all these applications looks like this, I would love to get away from having this setup this way, but it was setup to the guy before me and I am very new to the SCCM world.
set oShell= CreateObject("Wscript.Shell")
set oEnv = oShell.Environment("PROCESS")
oEnv("SEE_MASK_NOZONECHECKS") = 1
'Copy all drivers to the local driver folder
set filesys=CreateObject("Scripting.FileSystemObject")
If filesys.FolderExists(".\HPROTECT") Then
   filesys.CopyFolder ".\HPROTECT", "c:\drivers\HPROTECT",True
End If
If filesys.FolderExists(".\PWRMGR") Then
   filesys.CopyFolder ".\PWRMGR", "c:\drivers\PWRMGR",True
End If
If filesys.FolderExists(".\Hotkey") Then
   filesys.CopyFolder ".\Hotkey", "c:\drivers\Hotkey",True
End If
If filesys.FolderExists(".\video") Then
   filesys.CopyFolder ".\video", "c:\drivers\video",True
End If
If filesys.FolderExists(".\fingerpr") Then
   filesys.CopyFolder ".\fingerpr", "c:\drivers\fingerpr",True
End If
If filesys.FolderExists(".\rapidbt") Then
   filesys.CopyFolder ".\rapidbt", "c:\drivers\rapidbt",True
End If
If filesys.FolderExists(".\commutil") Then
   filesys.CopyFolder ".\commutil", "c:\drivers\commutil",True
End If
'Install Drivers from local drive
'T530-win7
oShell.Run "c:\drivers\video\setup.exe -S",0,True
oShell.Run "c:\drivers\Fingerpr\setup.msi /q /norestart",0,True
oShell.Run "c:\drivers\HPROTECT\setup.exe -s -v""/qn REBOOT=ReallySuppress""",0,True
oShell.Run "c:\drivers\rapidbt\setup64.exe /s /v""/qn REBOOT=ReallySuppress""",0,True
oShell.Run "c:\drivers\Hotkey\setup.exe /S",0,True
oShell.Run "c:\drivers\PWRMGR\setup.exe /s",0,True
oShell.Run "c:\drivers\commutil\setup.exe /SP- /VERYSILENT /NORESTART /SUPPRESSMSGBOXES",0,True
oEnv.Remove("SEE_MASK_NOZONECHECKS")

Have you changed or modified anything at all since migrating the TS? Have you verified that your
Setup Windows and ConfigMgr step is pointing to the
Configuration Manager Client Package rather than to an old package reference to the SCCM 2007 client?
You might also make sure the applications are installing in OS mode rather than PE mode, but I doubt that is the case.
You might try manually setting a management point in the Configuration Manager install portion. Example: SMSMP=ManagementPoint.contoso.com (yes, use the full FQDN). If I recall that fixed an issue I was having with a client due to the device
trying to reach the test server because they did not isolate it on a separate network.

"Flash out of date" comes up, new install, and will not accept Password for install? Next step?

"Flash out of date" comes up, i do a new install, the log-in and password windows pops up, I type in password and it will not accept.
I have changed password, confirmed password, rebooted several times, and it still will not re-insall new version.
I am stuck.
HELP!

This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt. If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.
If you're still stumped, you may need to reset the password on your Mac:
http://support.apple.com/kb/PH18653
http://support.apple.com/kb/PH14325
http://support.apple.com/en-us/HT201240

New version (17) will not run after downloading and installing. Tried twice ...uninstalling between downloads but to no avail. Have re-installled v.15

this is really to report what occurred this morning.
since the update to v 17 Firefox would not run
d/loaded the new version twice (uninstalling between) but to no avail - the program would not open although Task Manager shows the process running.
have re-installed v 15 so I have a browser.
lack of a way to report such problems is a weakness which needs addressing

A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls

Linux 10g AS new install: Forms services not running [solved]

Similar Messages

Maybe you are looking for