Linux-3.6.10-1 diff from 3.6.9-1

Stupid question, but is there a way I can see the diff between these two?
https://mailman.archlinux.org/pipermail … 24142.html

demyze wrote:
http://www.kernel.org/diff/diffview.cgi … 3.6.10.bz2
Should give you what you want.
Well, not really. That patch is a patch to bring kernel-3.6 upto 3.6.10.
To get the diff between 3.6.10 and 3.6.9 you would need to diff the kernels after patching.

Similar Messages

  • New password must differ from old password by at least 9999 characters.

    Hi All,
    When  logging into my Apex as admin ( https://server/apex/apex_admin ) , I was asked to changed the password which I did but then I received the error "New password must differ from old password by at least 9999 characters". Apparently I made some wrong settings in the password policies before, but now I am stuck. I have the admin password, but I cannot go pass the change-passsword page.
    Is there a way that I can reset the password policy from the command line ?
    My Apex is 4.2.2 on Linux RHEL 6.3.
    Thanks,
    Vu

    Hi and Welcome to the Forums!
    Even though things switched over via DTM, it sounds like something on your carrier side has not yet fully switched over. I suggest you contact them for formal assistance as they manage your BIS account and need to ensure that things have properly shifted over on their side.
    FYI -- the credentials it is asking for have nothing to do with your email accounts. These credentials are your BIS account credentials (the account I mentioned above). BIS stores all of your email credentials so that it can perform as true PUSH from the perspective of the BB. But, to protect those, it further has credentials to get into the BIS account itself...and these are the credentials it is requesting.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Net price in R/3 PO differ from the actual local PO net price Urgent

    Hi,
    I  am working on extended classic scenario
    I created a local PO, in which the net price of the material is 100 Euro later on I changed the payment terms and when I checked the backend PO which is the copy of the local PO, I found that the net price has been changed from 100 Euro to 212 Euro and when I checked the PO in SRM I could see the same value i.e. 100 Euro.I checked the change document in backend system and found that the net price has been changed by the SRM_RFC user.
    This has happened for quite a few number of local PO
    I am not able to understand how the backend PO net price can differ from the local PO net price.
    Please provide me useful input
    Regards,
    Yatendra

    Hi Yatendra,
    I think this is due to R/3.
    Can you check the source of supply in R/3 PO ?
    especially if a PIR or contract has been assigned ?
    Look at price conditions in R/3 PO item, to see the execution plan of pricing.
    I think that during ECS PO creation in R/3, the SRM price is correctly passed, but during the change the price is overwritten by R/3.
    What are your SRM & R/3 releases ?
    Check OSS arround BAPI_PO_CREATE, BAPI_PO_CREATE1 and BAPI_PO_CHANGE.
    Rgds
    Christophe
    PS: please reward points for helpfull answers

  • How does Adobe ExportPDF differ from the export feature in Adobe Acrobat Pro 9.0?

    How does Adobe ExportPDF differ from the export feature in Adobe Acrobat Pro 9.0?

    ExportPDF is based on a newer conversion engine than the one found in Acrobat 9.0.  They're similar in some respects, but ExportPDF is more advanced.
    -David

  • R12 Staging in Linux (Autostage is not picking up from next dvd)

    Hi,
    I am doing the autostage using perl.
    How to do?
    anyone give - step by step in details.
    Thanks in advance
    Regs.
    TS

    Duplicate thread (Please post only once):
    R12 Staging in Linux (Autostage is not picking up from next dvd)
    R12 Staging in Linux (Autostage is not picking up from next dvd)

  • CK11N_STD of profit center valuation differ from legal & group valuation

    Dear Experts,
    Standard price for profit center valuation differ from company code & group valuation, due to some lower level mat. get different cost in costing run. But, all three valuation currency are TWD.
    ex: Mat. A in lower level
    legal/group valuation:    $ 282,872
    Profit center valuation:  $ 282,871
    We didn't mark up any price between plants.
    The STD price for lower level mat. are all the same.
    Why do we still get differnt results?
    How do we change it to the same STD, because currency are all the same.(TWD)
    Thanks in advance.

    Just those SD conditions with condition category equal to 'b' or 'c'  or 'h'  are passed into CO-PA profit center valuation.  SAP Note 135288 explains it more.  Note 364449 is also relevant.  Should you seek to correct past postings, please consider notes 418080 and 206888.
    Thanks and best regards,
    [Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
    SAP Labs, LLC
    BusinessObjects Division
    Americas Applications Regional Implementation Group (RIG)

  • Keyboard shortcuts CS5 differ from CS4.

    Hello all,
    Im used to work on a mac, but in my new job i have to use both the PC and MAC. Now im used to CS4 and i just migrated to CS5. Now most shortcuts im used to dont work, wich is a real pain. I completely rely on them for i sometimes dont even know where to find them in the menus.
    Any advice?
    Thanks

    I have begun working in a school, helping students with shop illu and indy. They gave me a Dell, it will have to do. The students work on dell pc's or brand new macs, or on there own laptops. Most problems are solved, so i will remap the functions that need fixing. I would like to reply in the thread but im at home now and although im signed in, i cant respond, can only report abuse. I shall wander over to the photoshop section and ask there about my other questions.
    Thanks again all, for the quick response.
    Date: Thu, 27 Jan 2011 16:43:28 -0700
    From: [email protected]
    To: [email protected]
    Subject: Keyboard shortcuts CS5 differ from CS4.
    What brand of Laptop?
    This certainly does sound like the mapping problem I mentioned. You can fix all the shorcuts that use the enter key by making a new set and adding the numpad enter as a second option, but that isn't going to help with other shortcuts that use numpad keys (though the only ones that likely would affect are style shortcuts, for which the numlock must be on -- others you can use the regular keys for those functions and just change the habits you may have developed about the numpad keys).
    I'm not sure what's going on in Photoshop. You should probably ask over there if anyone knows of similar issues related to keyboard mappings. And just maybe you should try a different brand of laptop...
    >

  • 10.6.7, hardware failure but the hard drive is intact.  I can access the hard drive via Linux.  Need to get mail from Mail.app and from Entourage 2004.

    I need to know a couple of things, but y'all may not have all the answers I need.
    First, I need to know how to retrieve the mail files from Mail.app and from Entourage 2004.  I don't know if this is a valid asusmption, but in my experience with Windows, I know that Outlook keeps everything in a single monolithic .PST file.  Is this the case with either Mail.app or with Entourage?
    Second, I need to know how to access said mail files in a Linux mail app.  The mail from Mail.app is more important than that from Entourage, so it has to take priority.  Will I need some sort of converter program, or is there enough similarity between Mail.app and one of the Linux mail applications that I can simply import it?  (BTW, I'm running Ubuntu Linux 11.04 on my Linux netbook. I wish there was some way I could get Snow Leopard on here.)
    Any advice on any of this problem will be extremely helpful. Thanks.

    PastorLarry wrote:
     I'm running Ubuntu Linux 11.04 on my Linux netbook. I wish there was some way I could get Snow Leopard on here.
    Direct install MacBuntu (based upon Ubuntu 11.04)
    http://www.oslike.se/
    I have it running on one of my single core netbooks.
    WIth your other problem, just borrow a Mac temporariy, drag a enclosure to a Apple Store and use one of theirs, they don't mind as they have Deep Freeze installed on all their machines so changes don't stick upon rebooting.

  • Logical joins differ from Physical layer joins

    Can please answer to my Question?
    1.How does Logical joins differ from Physical layer joins?
    2.What is NQSConfig.INI file and what does it contain?
    Thanks
    Chi
    [email protected]

    2) The NQSConfig.INI file contains configuration and tuning parameters for the Oracle BI Server. There are parameters to configure disk space for temporary storage, set sort memory buffer sizes, set cache memory buffers, set virtual table page sizes, and a number of other configuration settings that allow you to take full advantage of your hardware's capabilities.
    For more information about the NQSConfig.INI file parameters, refer to Oracle Business Intelligence Infrastructure Installation and Configuration Guide.
    1) Logical joins are used in Business Model, Physical joins are used in physical layer. A key property of a logical join is cardinality. Cardinality expresses how rows in one table are related to rows in the table to which it is joined. Logical joins supports outer joins. so many else to mention... just go through RPD help file.
    - Madan

  • How Web intelligence is differ from Crystal reports

    How Web intelligence is differ from Crystal reports

    it depends on what's the business requirement that will influence what kind of reporting format you want to use.
    to list few differences:
    1. CR more suitable for complex reports webi used more for general adhoc tor quick reporting.
    2. CR can be published to enterprise or can be saved to the disk and can be accessed using crystal reports SDK: CRJ or CR.NET. Where as webi is strictly accesses only via Enterprise. There are no webi SDKs for accessing webi reports in unmanaged ( not published to enterprise) mode.
    3. CR SDK\ RAS more powerful than Report Engine SDK( used for webi)
    4. To view a CR you can use page server and cache server. To view a webi report, you use only webi processing server, no cache server available in BO framework. Similar for scheduling webi reports its the webi processing server that does it all.
    5.  CR offers more options to connect to database than for webi.
    6. CR has mutliple 3rd party exporting formats. Webi has fewer.
    7. CR can be designed from CR designer desktop tool, or CR.com or on demand or using RAS SDK ( at runtime). Webi report can be designed in webi rich client desktop tool or java reporting panel( JRP) available in Infoview or any app that can load this JRP applet. in 3.1 you can use Java Report Engine SDK to create webi report from scratch at runtime ( like RAS for CR).
    So not that 1 is better than other, it really depends on your business requirements are.

  • My mails are syncing across all my devices but the ones read differ from devices

    my mails are syncing across all my devices but the ones read differ from each  device.

    Make sure you are fully updated.
    OS X Lion Update 10.7.5 (Client Combo) 1.91 GB
    http://support.apple.com/kb/DL1582
    If you Control-Click (Right-click) on a folder, select Synchronize now. Does this help? If not you might want to select folder then select Rebuild under Mailbox in the Menu bar.

  • How does the content repository differ from the ECM plugin capability

    How does the content repository differ from the ECM plugin capability suh as Documentum. What are the different use cases. Which is the best to use for managing document uploads by user for association with user's personal products/services ?

    Content Repository is a standards-based, fully featured repository, included in all the editions of the Adobe Digital Enterprise Platform and Solutions. You can use it to store and access content, execute rich set of content services like search, authorization, etc. As such, it's ideally suited for all the content/document/asset-related needs of your applications. It offers the JCR API, plus access through RESTful interface and WebDAV network drive (among others). Additionally, managing content in the Content Repository makes it immediately availble for all the solutions that run of the platform.
    In essence, Content Repository is your go-to place to store and manage content in the Digital Enterprise Platform/Solutions. It is well suited to cater to your use case.
    The ECM Plugins (Connectors) are used if you have existing LiveCycle document services, and you have one of the ECM systems in your infrastructure used as archive. It allows you then to connect to such a 3rd-party system, and retrieve document for processing, as well as store them back for archiving.

  • Office 365 midsize business is differ from office 2013

    How office 365 midsize business is differ from office 2013 professional please provide me with the details how office 365 work and its features.

    Hi,
    "Office 365" refers to subscription plans that include access to Office applications plus other productivity services that are enabled over the Internet (cloud services), such as Lync web conferencing and Exchange Online hosted email for business,
    and additional online storage with OneDrive and Skype world minutes for home.
    You can refer to this FAQ link below, find more in the section "What is Office 365? How is it different from Microsoft Office":
    http://office.microsoft.com/en-001/business/microsoft-office-365-for-business-faq-FX103030232.aspx
    You may also find the information below helpful:
    Compare all Office 365 for business plans
    http://office.microsoft.com/en-001/business/compare-all-office-365-for-business-plans-FX104051403.aspx
    Choose your Office
    http://office.microsoft.com/en-001/buy/compare-microsoft-office-products-FX102898564.aspx
    Regards,
    Melon Chen
    TechNet Community Support

  • PUP differ from period to period

    Dear Experts,
    we have material ledger actual costing active, we run CKMLCP at end of the period when analyse the material master we found the PUP price differ from period to period in accounting view of material master,
    Exp- run CKMLCP for period "7" PUP is 1000 the same value should show in period "8" also, bcoz CKMLCP is not run for period "8"
    but system is showing 1200 fer period 8.
    please help to resolve the issue.
    Thanks & Regards,

    Hi,
    If the periodic unit price is just statistical then in this case it is updated every time when the material is moved. This is a side-effect of the activation of the actual moving average price posting logic in the material ledger. This logic is described in the note 1253944.
    Nevertheless, for a material with price control 'S' and price determination '3', the periodic unit price is not relevant until the
    single level price determination has been run.
    The periodic unit price for V-price materials is still updated when the 'X' in the field MLNEW of table TCURM is removed. However, the posting logic is different.
    MLNEW = ' ': The logic is the one described in note 689189.
    MLNEW = 'X': the logic is the one described in note 1253944.
    For S-price materials with price determination '3', the update logic for the periodic unit price is as follows:
    MLNEW = ' ': The periodic unit price is only updated in the single and multi level price determination and when posting the closing entry.
    MLNEW = 'X': Additionally, the periodic unit price is also updated in every movement.
    regards
    Waman

  • WF table overview is diff from applet view

    Hi,
    Here is the issue. When i checked my SC approval, it shows in Table view, Awaiting approval at 2nd level. Where as in applet view, it displays both 1st and 2nd levels as approved. How come i am getting 2 diff status?
    I guess its a bug.. Did anyone come across this scenario?
    Appreciate your inputs.
    Thanks
    Krish

    Hi Imtiaz,
    This note comes with SAPKIBK011 and we are already on this pack. But still we are getting tabular view diff from applet view.
    Most of the time, table view happens to be correct..
    Wondering why applet preview is not reflecting the current wf status.
    Appreciate any inputs/clues.
    Thanks
    Krish

Maybe you are looking for

  • [Urgent]Session terminates during DS enhancement due to big data

    Hi experts,    I have 0FI_GL_4 for DS enhancement. The business requirement is complicated but we have already fully optimized that ABAP code. Now our R3 side has 2.5 million records in BSEG and if we start BW initial extraction , the session will us

  • E72 Option to add in more tones voices

    The E72 phone function of "Say Caller's name" is quite useful as it voice out the caller's name & even read out the e-mail text msg that we received when we opened up to view them. However, there's only two options so far as in only got 2 different t

  • Batch processing in Quark 7 - how to avoid "missing font" interrruptions?

    I have a time scheduled applescript which opens a folder of quark files, does some processing using a quark extension, closes each file and moves it to a separate location. Problem is I get these "Filename uses fonts not installed in your system" dia

  • Error when accessing 0material

    We refreshed our quality system. After doing init, full update and delta, when in info provider try to access 0material , we are getting the below problem. Kindly suggest solution Runtime Errors         ASSERTION_FAILED Date and Time          12.06.2

  • Contacts Edited on MacBook Fail to sync to iPod

    I edited a contact on my MacBook, synced my iPod via the cable, and the contact remained unchanged on my iPod. I'd appreciate any suggestions on how to fix this problem.