Linux Anyconnect 3.1 install failing

I have a file from my company to use to install Cisco Anyconnect 3.1 on a Linux system.  I'm running openSUSE 13.1.  I've tried installing it, but get an error regarding libxml2.so.2 as no such file or directory.  It continues but then again fails on mv: cannot stat '/opt/cisco/vpn/@.log' that it does not exist.  Tries to continue again and fails with Warning: Unit file of vpnagentd.service changed on disk, 'systemctl daemon-reload' recommended.  I'm not overly familiar with Linux, but I have to set up this system at my house to access the company network for programming.  Would someone be able to provide some guidance?  The full error page is as follows (follows answering Y to accept the terms):
Description of Other Rights and Obligations
Please refer to the Cisco Systems, Inc. End User License Agreement.
Do you accept the terms in the license agreement? [y/n] y
You have accepted the license agreement.
Please wait while Cisco AnyConnect Secure Mobility Client is being installed...
Removing previous installation...
/opt/cisco/anyconnect/bin/manifesttool: error while loading shared libraries: libxml2.so.2: cannot open shared object file: No such file or directory
Note: This output shows SysV services only and does not include native
systemd services. SysV configuration data might be overridden by native
systemd configuration.
redirecting to systemctl stop vpnagentd
Warning: Unit file of vpnagentd.service changed on disk, 'systemctl daemon-reload' recommended.
mv: cannot stat ‘/opt/cisco/vpn/*.log’: No such file or directory
Note: This output shows SysV services only and does not include native
systemd services. SysV configuration data might be overridden by native
systemd configuration.
vpnagentd                 0:off  1:off  2:off  3:on   4:off  5:on   6:off
Starting Cisco AnyConnect Secure Mobility Client Agent...
redirecting to systemctl start vpnagentd
Warning: Unit file of vpnagentd.service changed on disk, 'systemctl daemon-reload' recommended.
Job for vpnagentd.service failed. See 'systemctl status vpnagentd.service' and 'journalctl -xn' for details.
michael@linux-vjo6:~/anyconnect-3.1.04059/vpn>
In the vpnagentd line, the ones showing on (3 and 5) are in green.  Thanks.

Hi,
You could be running into compatibility issues. Try un-installing the anyconnect and install openconnect.  Try sudo zypper install openconnect  to install from the opensuse repository.  They try to connect using the openconnect from the command line.
Thanks
John

Similar Messages

  • Why the anyconnect 3.0.07059 fail to auto install on Linux?

    Hi,
    we are migrating our ASA to 8.4 in order to be able to use the Anyconnect client 3.0.07059. Everything go pretty straight foward for Windows and Mac except for some french translation issues. But for Linux, the web deploy always fail. I need to download manualy the vpnsetup.sh and run it in command line. Is there a way to make the web deploy work on Linux (32 and 64 bits) ?
    Thanks for your help
    Patrick

    Hi Nelcnetworks,
    I have few questions that I would like to ask you to isolate the issue.
    1. On the ASA, do you have any certificate applied to the outside interface. If yes then please let me know if the certificate is generated via local CA server or you purchased it from a third party vendor like Godaddy, Entrust etc.
    2. If you have a certificates applied to the ASA's outside interface and the certificate is generated locally, then do you have the same certificate installed on the client machine as well.
    I know it works fine when you connect manually by launching the anyconnect client because you get prompt foe the certificate error and you ignore that error message and forces ancyconnect client to connect but when you restart the machine and anyconnect launches itself then you do not get any such prompt and anyconnect will fail connection.
    So to make it to work, either purchase a third party certificate and apply it to the outside interface or generate a self signed certificate on the ASA and bind it to the outside interface and import the same certifiacte in the trusted root store of the client machine.
    You can see that the client is failing connection is because of the certificate error by going through the dart logs captured on your machine.
    Let me knwo if this helps.
    Thanks,
    Vishnu Sharma

  • Sun Studio 10 Linux, RHEL3 U4, install fails on openmotif21.

    Hello everyone,
    As a long-time user of Sun WorkShop... I mean Forte.. I mean Studio; it was with great anticipation that I downloader Sun Studio 10 for Linux.
    On one machine it failed to install and on another it installed properly.
    Here are the details:
    - Machine 1: RHEL3 U2 (x86/i686), small install: Installation of Studio 10 went fine.
    - Machine 2: RHEL3 U4 (x86/i686), complete install : Installation of Studio 10 failed. The following can be gathered from the logs under /var/opt/sun:
    [....snip....]
    Installing Sun Studio Software
    Log file: /var/opt/sun/install/logs/Sun_Studio_Software_install.A04060111
    Installed: /var/prod/com.sun.studio_10/uninstall_Sun_Studio_Software.class
    Uninstaller is at: /var/prod/com.sun.studio_10/uninstall_Sun_Studio_Software.class
    Standalone Tools: Building Software
    Installing RPM: sun-dmake-10.0-1
    [....snip....]
    System packages supporting Sun Studio Software
    Installing RPM: openmotif-2.1.31-2_IST
    error: Failed dependencies:
    openmotif < 2.2.2 conflicts with openmotif21-2.1.30-9.RHEL3.4
    Error: RPM openmotif-2.1.31-2_IST install failed}.
    Install complete. Package: openmotif-2.1.31-2_IST
    rpm: Skipping rpm remove of openmotif-2.1.31-2_IST, not installed.
    rpm: Skipping rpm remove of sun-svc-locale-zh-10.0-1, not installed.
    [....snip....]
    And everything is removed. Is this issue documented somewhere? Is there a workaround?
    Thanks for reading,
    Vincent

    Deselecting 'system supporting packages' from the Sun Studio 10 installation list made the trick and Studio finished installing.
    However, I have a few concerns:
    1) Since Studio will be using the system's openmotif, will it be supported? (I guess not).
    2) Since openmotif-2.1.31-2_IST.i386.rpm from the Studio 10 IDE kits lands under /usr/OpenMotif-2.1.31 and should not conflict with any kind of other/system openmotif, why didn't SUN just create a sun-openmotif-support package? This would prevent a naming conflict when trying to install on RHEL3 if RHEL's openmotif21 is already installed?
    3) It appears to work fine, even without SUN's provided openmotif.
    Cheers,
    Vincent

  • Solaris 10 DVD install fails at 90%

    Hi, this is my first time posting here. I've used a variety of linux distributions for a few years now: first Red Hat, then Suse, then Ubuntu, and currently Gentoo. So I have familiarity with installs and *nix systems.  Now I'm trying to install Solaris 10 on a second hard drive with the install DVD that I burned from a download.  After a few tries, and learning some Solaris command line, I went ahead and selected my custom packages, then made my custom partitioning layout on the second disk, then I began the package install.
    It took a while, so I was not there the whole time, but before the error, package install was at 90%. I know I had enough room on the partition for all the packages. After checking the system again I found that it had stopped, and began complaining about not finding packages on the install disk.
    I tried the install again, this time with a minimum of my intervention and custom packaging selection. Again the install fails after it is mostly installed. After learning how to mount an IBM formatted disk, I copied the install logs to it, and I'd like to attach them to this post, but I can't see how to do that, if anyone can tell me how to add log files, I'd appreciate it. I just don't want to paste their entire contents here because they're too large.
    Thanks in advance for the help,
    Sam
    Snippets from the log files:
    Log file 1:
    Default layout will not work on this system.
    Installation partially failed
    Error:
    Error: ERROR: Could not install boot blocks
    Error:
    Error: ERROR: System installation failed
    Pfinstall failed. Exit stat= java.lang.UNIXProcess@39474b 2
    Installation of <SUNWgzip> was successful.
    6276 blocks
    Installation of <SUNWdtdte> was successful.
    bzcat: I/O or other error, bailing out.  Possible reason follows.
    bzcat: I/O error
            Input file = /cdrom/Solaris_10/Product/SUNWgttf/archive/none.bz2, output
    file = (stdout)
    cpio: Can't read input:  end of file encountered prior to expected end of archiv
    e.
    1 errors
    Unarchiving of /cdrom/Solaris_10/Product/SUNWgttf/archive/none failed with error
    1
    pkgadd: ERROR: class action script did not complete successfully
    Installation of <SUNWgttf> failed.
    260 blocks
    Installation of <SUNWxwacx> was successful.
    No changes were made to the system.
    pkgadd: ERROR: unable to access pkgmap file </cdrom/Solaris_10/Product/SUNWgnome
    -text-editor-share/pkgmap>Log file 2:
    Default layout will not work on this system.
    Installation partially failed
    Error:
    Error: ERROR: Could not copy file (/cdrom/Solaris_10/Product/.clustertoc) to (/a
    /var/sadm/system/admin/.clustertoc)
    Error:
    Error: ERROR: Could not install administration information
    Error:
    Error: ERROR: Could not install all packages. Product installation failed
    Error:
    Error: ERROR: System installation failed
    Pfinstall failed. Exit stat= java.lang.UNIXProcess@1eb5666 2
    Installation of <SUNWperl584usr> was successful.
    bzcat: I/O or other error, bailing out.  Possible reason follows.
    bzcat: I/O error
            Input file = /cdrom/Solaris_10/Product/SUNWesu/archive/none.bz2, output
    file = (stdout)
    cpio: Can't read input:  end of file encountered prior to expected end of archiv
    e.
    1 errors
    Unarchiving of /cdrom/Solaris_10/Product/SUNWesu/archive/none failed with error
    1
    pkgadd: ERROR: class action script did not complete successfully
    Installation of <SUNWesu> failed.
    118 blocks
    No changes were made to the system.
    pkgadd: ERROR: unable to access pkgmap file </cdrom/Solaris_10/Product/SUNWgnome
    -config/pkgmap>
    No changes were made to the system.
    pkgadd: ERROR: unable to access pkgmap file </cdrom/Solaris_10/Product/SUNWgnome
    -vfs-root/pkgmap>
    Solaris 10 software installation partially failed
    ERROR: Could not copy file (/cdrom/Solaris_10/Product/.clustertoc) to (/a/var/sa
    dm/system/admin/.clustertoc)
    ERROR: Could not install administration information
    ERROR: Could not install all packages. Product installation failed
    ERROR: System installation failed

    Hi. I had your same problem with Solaris Express Developer Edition 01/08.
    The PC was complaining about the failed installation of some packages:
    SUNWsndmr
    SUNWsndmu
    SUNWsolnm
    I suspected they were audio drivers and/or libraries.
    So I decided to do an absolutely minimum installation and I even excluded anything that was unnecessary and Audio-related. Actually Solaris Installer complained about unsatisfied USB debendencies, but went on anyway...
    And it worked!
    Solaris completed the installation.
    I don't know if it's possible to add the left out drivers in a second moment yet. We'll see.
    Maybe I'm wrong but, from your logfiles you seem to have a similar problem with:
    SUNWgttf
    SUNWgnome-config
    SUNWgnome-vfs-root
    And I suspect it may be due to a CD/DVD read error.
    Edited by: Dario.Rvsso on Apr 23, 2008 3:34 PM

  • Db 11.2.0.3 install fails with this exception

    Hello All,
    To give a background :
    have Virtual box on windows 7.. Virtual box have the oracle linux 6. Completed installed for clusterware.
    I have successfully installed clusterware, while attempting to install database i get a alert at the step 2 of the db install.
    this is my second attempt to install the db software , at the first time I had the bad checksum of the db installation software .. I cleaned up the Oracle home and made the second attempt to get the below warning and fails:
    more oraInstall2013-04-11_06-50-25PM.err
    ---# Begin Stacktrace #---------------------------
    ID: oracle.install.ivw.common.validator.SupportedOSValidator:363
    oracle.cluster.verification.PreReqNotSupportedException: Reference data is not a
    vailable for verifying prerequisites on this operating system distribution
         at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTa
    skFactory.java:301)
         at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTa
    skFactory.java:159)
         at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSuppo
    rted(VerificationUtil.java:7441)
         at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSuppo
    rted(VerificationUtil.java:7390)
         at oracle.cluster.verification.ClusterVerification.isPreReqSupported(Clu
    sterVerification.java:6598)
         at oracle.install.ivw.common.validator.SupportedOSValidator.verifyEnviro
    nment(SupportedOSValidator.java:68)
         at oracle.install.ivw.common.validator.SupportedOSValidator.validate(Sup
    portedOSValidator.java:96)
         at oracle.install.commons.flow.validation.ValidationHelper.validateState
    (ValidationHelper.java:185)
         at oracle.install.commons.flow.AbstractFlowExecutor.validate(AbstractFlo
    wExecutor.java:415)
         at oracle.install.commons.flow.AbstractFlowExecutor.leaveVertex(Abstract
    FlowExecutor.java:639)
         at oracle.install.commons.flow.AbstractFlowExecutor.transition(AbstractFlowExecutor.java:331)
         at oracle.install.commons.flow.AbstractFlowExecutor.nextState(AbstractFlowExecutor.java:271)
         at oracle.install.commons.flow.AbstractFlowExecutor.nextViewState(AbstractFlowExecutor.java:230)
         at oracle.install.commons.flow.DefaultFlowNavigator.goForward(DefaultFlowNavigator.java:58)
         at oracle.install.commons.flow.jewt.FlowWizard$1.run(FlowWizard.java:125)
         at oracle.install.commons.flow.jewt.FlowWizard$TransitionManager$1.run(FlowWizard.java:101)
         at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:417)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
         at java.util.concurrent.FutureTask.run(FutureTask.java:123)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:651)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:676)
         at java.lang.Thread.run(Thread.java:637)
    ---# End Stacktrace #-----------------------------
    ---# Begin Stacktrace #---------------------------
    ID: oracle.install.commons.util.exception.DefaultErrorAdvisor:366
    oracle.cluster.verification.PreReqNotSupportedException: Reference data is not available for verifying prerequisites on this operating system distribution
         at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:301)
         at oracle.cluster.verification.constraints.XmlTaskFactory.getTasks(XmlTaskFactory.java:159)
         at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:7441)
         at oracle.ops.verification.framework.util.VerificationUtil.isPreReqSupported(VerificationUtil.java:7390)
         at oracle.cluster.verification.ClusterVerification.isPreReqSupported(ClusterVerification.java:6598)
         at oracle.install.ivw.common.validator.SupportedOSValidator.verifyEnvironment(SupportedOSValidator.java:68)
         at oracle.install.ivw.common.validator.SupportedOSValidator.validate(SupportedOSValidator.java:96)
         at oracle.install.commons.flow.validation.ValidationHelper.validateState(ValidationHelper.java:185)
         at oracle.install.commons.flow.AbstractFlowExecutor.validate(AbstractFlowExecutor.java:415)
         at oracle.install.commons.flow.AbstractFlowExecutor.leaveVertex(AbstractFlowExecutor.java:639)
         at oracle.install.commons.flow.AbstractFlowExecutor.transition(AbstractFlowExecutor.java:331)
         at oracle.install.commons.flow.AbstractFlowExecutor.nextState(AbstractFlowExecutor.java:271)
         at oracle.install.commons.flow.AbstractFlowExecutor.nextViewState(AbstractFlowExecutor.java:230)
         at oracle.install.commons.flow.DefaultFlowNavigator.goForward(DefaultFlowNavigator.java:58)
         at oracle.install.commons.flow.jewt.FlowWizard$1.run(FlowWizard.java:125)
         at oracle.install.commons.flow.jewt.FlowWizard$TransitionManager$1.run(FlowWizard.java:101)
         at java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:417)
         at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:269)
         at java.util.concurrent.FutureTask.run(FutureTask.java:123)
         at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:651)
         at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:676)
         at java.lang.Thread.run(Thread.java:637)
    ---# End Stacktrace #-----------------------------
    I tried to deinstall the failed installation through deinstall but get an error with that as well with a perl error. Currently I do not have any files under my oracle home.
    Any suggestions on how to proceed at this point would be really helpful.

    Hi Friend,
    Please check Pre-Requisites for Oracle 11g R2 database for Virtual Box. May be below link will give you some sort of idea.
    http://eudba.wordpress.com/2012/08/10/installing-oracle-11g-on-oracle-linux-6-with-asm-eng/
    Thanks
    LaserSoft

  • [Solved]wine install fails

    Wine install fails due to
    [cii@cii1 ~]$ sudo pacman -S wine
    resolving dependencies...
    looking for inter-conflicts...
    Targets (18): lib32-acl-2.2.51-2 lib32-attr-2.4.46-2 lib32-bzip2-1.0.6-1
    lib32-fontconfig-2.8.0-4 lib32-freetype2-2.4.10-1
    lib32-gcc-libs-4.7.1-4.1 lib32-gettext-0.18.1.1-2
    lib32-libice-1.0.8-1 lib32-libsm-1.2.1-1
    lib32-libxcursor-1.1.13-1 lib32-libxi-1.6.1-1
    lib32-libxrandr-1.3.2-2 lib32-libxrender-0.9.7-1
    lib32-libxt-1.1.3-1 lib32-mesa-8.0.3-3.2
    lib32-util-linux-2.21.2-1 lib32-zlib-1.2.7-1 wine-1.5.8-1
    Total Download Size: 0.13 MiB
    Total Installed Size: 247.69 MiB
    Proceed with installation? [Y/n] y
    :: Retrieving packages from multilib...
    lib32-mesa-8.0.3-3.... 4.2 KiB 38.7K/s 00:00 [######################] 100%
    (18/18) checking package integrity [######################] 100%
    error: failed to commit transaction (invalid or corrupted package)
    Errors occurred, no packages were upgraded.
    [cii@cii1 ~]$ sudo pacman -S wine --debug
    debug: parseconfig: options pass
    debug: config: attempting to read file /etc/pacman.conf
    debug: config: finish section '(null)'
    debug: config: new section 'options'
    debug: config: HoldPkg: pacman
    debug: config: HoldPkg: glibc
    debug: config: SyncFirst: pacman
    debug: config: arch: x86_64
    debug: config: finish section 'options'
    debug: config: new section 'catalyst'
    debug: config: finish section 'catalyst'
    debug: config: new section 'core'
    debug: config file /etc/pacman.conf, line 80: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: finish section 'core'
    debug: config: new section 'extra'
    debug: config file /etc/pacman.conf, line 84: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: finish section 'extra'
    debug: config: new section 'community'
    debug: config file /etc/pacman.conf, line 92: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: finish section 'community'
    debug: config: new section 'multilib'
    debug: config file /etc/pacman.conf, line 103: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: finish section 'multilib'
    debug: config: finished parsing /etc/pacman.conf
    debug: setup_libalpm called
    debug: option 'logfile' = /var/log/pacman.log
    debug: option 'gpgdir' = /etc/pacman.d/gnupg/
    debug: option 'cachedir' = /var/cache/pacman/pkg/
    debug: parseconfig: repo pass
    debug: config: attempting to read file /etc/pacman.conf
    debug: config: finish section '(null)'
    debug: config: new section 'options'
    debug: config: finish section 'options'
    debug: config: new section 'catalyst'
    debug: config: SigLevel: Never
    debug: config: finish section 'catalyst'
    debug: registering sync database 'catalyst'
    debug: database path for tree catalyst set to /var/lib/pacman/sync/catalyst.db
    debug: adding new server URL to database 'catalyst': http://catalyst.apocalypsus.net/repo/catalyst/x86_64
    debug: config: new section 'core'
    debug: config: SigLevel: PackageRequired
    debug: config file /etc/pacman.conf, line 80: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: finish section 'core'
    debug: registering sync database 'core'
    debug: database path for tree core set to /var/lib/pacman/sync/core.db
    debug: "/var/lib/pacman/sync/core.db.sig" is not readable: No such file or directory
    debug: sig path /var/lib/pacman/sync/core.db.sig could not be opened
    debug: missing optional signature
    debug: adding new server URL to database 'core': http://archlinux.supsec.org/core/os/x86_64
    debug: adding new server URL to database 'core': http://archlinux.surlyjake.com/archlinux/core/os/x86_64
    debug: adding new server URL to database 'core': http://cake.lib.fit.edu/archlinux/core/os/x86_64
    debug: adding new server URL to database 'core': http://cosmos.cites.illinois.edu/pub/archlinux/core/os/x86_64
    debug: adding new server URL to database 'core': http://ftp.osuosl.org/pub/archlinux/core/os/x86_64
    debug: adding new server URL to database 'core': http://hive.ist.unomaha.edu/archlinux/core/os/x86_64
    debug: config: new section 'extra'
    debug: config: SigLevel: PackageRequired
    debug: config file /etc/pacman.conf, line 84: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: finish section 'extra'
    debug: registering sync database 'extra'
    debug: database path for tree extra set to /var/lib/pacman/sync/extra.db
    debug: "/var/lib/pacman/sync/extra.db.sig" is not readable: No such file or directory
    debug: sig path /var/lib/pacman/sync/extra.db.sig could not be opened
    debug: missing optional signature
    debug: adding new server URL to database 'extra': http://archlinux.supsec.org/extra/os/x86_64
    debug: adding new server URL to database 'extra': http://archlinux.surlyjake.com/archlinux/extra/os/x86_64
    debug: adding new server URL to database 'extra': http://cake.lib.fit.edu/archlinux/extra/os/x86_64
    debug: adding new server URL to database 'extra': http://cosmos.cites.illinois.edu/pub/archlinux/extra/os/x86_64
    debug: adding new server URL to database 'extra': http://ftp.osuosl.org/pub/archlinux/extra/os/x86_64
    debug: adding new server URL to database 'extra': http://hive.ist.unomaha.edu/archlinux/extra/os/x86_64
    debug: config: new section 'community'
    debug: config: SigLevel: PackageRequired
    debug: config file /etc/pacman.conf, line 92: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: finish section 'community'
    debug: registering sync database 'community'
    debug: database path for tree community set to /var/lib/pacman/sync/community.db
    debug: "/var/lib/pacman/sync/community.db.sig" is not readable: No such file or directory
    debug: sig path /var/lib/pacman/sync/community.db.sig could not be opened
    debug: missing optional signature
    debug: adding new server URL to database 'community': http://archlinux.supsec.org/community/os/x86_64
    debug: adding new server URL to database 'community': http://archlinux.surlyjake.com/archlinux/community/os/x86_64
    debug: adding new server URL to database 'community': http://cake.lib.fit.edu/archlinux/community/os/x86_64
    debug: adding new server URL to database 'community': http://cosmos.cites.illinois.edu/pub/archlinux/community/os/x86_64
    debug: adding new server URL to database 'community': http://ftp.osuosl.org/pub/archlinux/community/os/x86_64
    debug: adding new server URL to database 'community': http://hive.ist.unomaha.edu/archlinux/community/os/x86_64
    debug: config: new section 'multilib'
    debug: config: SigLevel: PackageRequired
    debug: config file /etc/pacman.conf, line 103: including /etc/pacman.d/mirrorlist
    debug: config: attempting to read file /etc/pacman.d/mirrorlist
    debug: config: finished parsing /etc/pacman.d/mirrorlist
    debug: config: finish section 'multilib'
    debug: registering sync database 'multilib'
    debug: database path for tree multilib set to /var/lib/pacman/sync/multilib.db
    debug: "/var/lib/pacman/sync/multilib.db.sig" is not readable: No such file or directory
    debug: sig path /var/lib/pacman/sync/multilib.db.sig could not be opened
    debug: missing optional signature
    debug: adding new server URL to database 'multilib': http://archlinux.supsec.org/multilib/os/x86_64
    debug: adding new server URL to database 'multilib': http://archlinux.surlyjake.com/archlinux/multilib/os/x86_64
    debug: adding new server URL to database 'multilib': http://cake.lib.fit.edu/archlinux/multilib/os/x86_64
    debug: adding new server URL to database 'multilib': http://cosmos.cites.illinois.edu/pub/archlinux/multilib/os/x86_64
    debug: adding new server URL to database 'multilib': http://ftp.osuosl.org/pub/archlinux/multilib/os/x86_64
    debug: adding new server URL to database 'multilib': http://hive.ist.unomaha.edu/archlinux/multilib/os/x86_64
    debug: config: finished parsing /etc/pacman.conf
    debug: loading package cache for repository 'local'
    debug: added 419 packages to package cache for db 'local'
    debug: loading package cache for repository 'catalyst'
    debug: opening database archive /var/lib/pacman/sync/catalyst.db
    debug: added 8 packages to package cache for db 'catalyst'
    debug: loading package cache for repository 'core'
    debug: opening database archive /var/lib/pacman/sync/core.db
    debug: added 195 packages to package cache for db 'core'
    debug: loading package cache for repository 'extra'
    debug: opening database archive /var/lib/pacman/sync/extra.db
    debug: added 2785 packages to package cache for db 'extra'
    debug: loading package cache for repository 'community'
    debug: opening database archive /var/lib/pacman/sync/community.db
    debug: added 2570 packages to package cache for db 'community'
    debug: loading package cache for repository 'multilib'
    debug: opening database archive /var/lib/pacman/sync/multilib.db
    debug: added 144 packages to package cache for db 'multilib'
    debug: adding package 'wine'
    debug: adding package wine-1.5.8-1 to the transaction add list
    resolving dependencies...
    debug: resolving target's dependencies
    debug: started resolving dependencies
    debug: checkdeps: package wine-1.5.8-1
    debug: checkdeps: missing dependency 'lib32-fontconfig' for package 'wine'
    debug: checkdeps: missing dependency 'lib32-mesa' for package 'wine'
    debug: checkdeps: missing dependency 'lib32-libxcursor' for package 'wine'
    debug: checkdeps: missing dependency 'lib32-libxrandr' for package 'wine'
    debug: checkdeps: missing dependency 'lib32-libxi' for package 'wine'
    debug: checkdeps: missing dependency 'lib32-gettext' for package 'wine'
    debug: pulling dependency lib32-fontconfig (needed by wine)
    debug: pulling dependency lib32-mesa (needed by wine)
    debug: pulling dependency lib32-libxcursor (needed by wine)
    debug: pulling dependency lib32-libxrandr (needed by wine)
    debug: pulling dependency lib32-libxi (needed by wine)
    debug: pulling dependency lib32-gettext (needed by wine)
    debug: checkdeps: package lib32-fontconfig-2.8.0-4
    debug: checkdeps: missing dependency 'lib32-freetype2>=2.3.11' for package 'lib32-fontconfig'
    debug: pulling dependency lib32-freetype2 (needed by lib32-fontconfig)
    debug: checkdeps: package lib32-mesa-8.0.3-3.2
    debug: checkdeps: missing dependency 'lib32-libxt>=1.1.1' for package 'lib32-mesa'
    debug: checkdeps: missing dependency 'lib32-gcc-libs>=4.6.1' for package 'lib32-mesa'
    debug: pulling dependency lib32-libxt (needed by lib32-mesa)
    debug: pulling dependency lib32-gcc-libs (needed by lib32-mesa)
    debug: checkdeps: package lib32-libxcursor-1.1.13-1
    debug: checkdeps: missing dependency 'lib32-libxrender' for package 'lib32-libxcursor'
    debug: pulling dependency lib32-libxrender (needed by lib32-libxcursor)
    debug: checkdeps: package lib32-libxrandr-1.3.2-2
    debug: checkdeps: missing dependency 'lib32-libxrender' for package 'lib32-libxrandr'
    debug: checkdeps: package lib32-libxi-1.6.1-1
    debug: checkdeps: package lib32-gettext-0.18.1.1-2
    debug: checkdeps: missing dependency 'lib32-acl' for package 'lib32-gettext'
    debug: pulling dependency lib32-acl (needed by lib32-gettext)
    debug: checkdeps: package lib32-freetype2-2.4.10-1
    debug: checkdeps: missing dependency 'lib32-zlib' for package 'lib32-freetype2'
    debug: checkdeps: missing dependency 'lib32-bzip2' for package 'lib32-freetype2'
    debug: pulling dependency lib32-zlib (needed by lib32-freetype2)
    debug: pulling dependency lib32-bzip2 (needed by lib32-freetype2)
    debug: checkdeps: package lib32-libxt-1.1.3-1
    debug: checkdeps: missing dependency 'lib32-libsm' for package 'lib32-libxt'
    debug: pulling dependency lib32-libsm (needed by lib32-libxt)
    debug: checkdeps: package lib32-gcc-libs-4.7.1-4.1
    debug: checkdeps: package lib32-libxrender-0.9.7-1
    debug: checkdeps: package lib32-acl-2.2.51-2
    debug: checkdeps: missing dependency 'lib32-attr>=2.4.46' for package 'lib32-acl'
    debug: pulling dependency lib32-attr (needed by lib32-acl)
    debug: checkdeps: package lib32-zlib-1.2.7-1
    debug: checkdeps: package lib32-bzip2-1.0.6-1
    debug: checkdeps: package lib32-libsm-1.2.1-1
    debug: checkdeps: missing dependency 'lib32-libice' for package 'lib32-libsm'
    debug: checkdeps: missing dependency 'lib32-util-linux-ng' for package 'lib32-libsm'
    debug: pulling dependency lib32-libice (needed by lib32-libsm)
    debug: provider found (lib32-util-linux provides lib32-util-linux-ng)
    debug: pulling dependency lib32-util-linux (needed by lib32-libsm)
    debug: checkdeps: package lib32-attr-2.4.46-2
    debug: checkdeps: package lib32-libice-1.0.8-1
    debug: checkdeps: package lib32-util-linux-2.21.2-1
    debug: finished resolving dependencies
    debug: started sorting dependencies
    debug: sorting dependencies finished
    looking for inter-conflicts...
    debug: looking for conflicts
    debug: check targets vs targets
    debug: check targets vs targets
    debug: check targets vs db and db vs targets
    debug: check targets vs db
    debug: check db vs targets
    debug: checking dependencies
    debug: checkdeps: package lib32-zlib-1.2.7-1
    debug: checkdeps: package lib32-bzip2-1.0.6-1
    debug: checkdeps: package lib32-freetype2-2.4.10-1
    debug: checkdeps: package lib32-fontconfig-2.8.0-4
    debug: checkdeps: package lib32-libice-1.0.8-1
    debug: checkdeps: package lib32-util-linux-2.21.2-1
    debug: checkdeps: package lib32-libsm-1.2.1-1
    debug: checkdeps: package lib32-libxt-1.1.3-1
    debug: checkdeps: package lib32-gcc-libs-4.7.1-4.1
    debug: checkdeps: package lib32-mesa-8.0.3-3.2
    debug: checkdeps: package lib32-libxrender-0.9.7-1
    debug: checkdeps: package lib32-libxcursor-1.1.13-1
    debug: checkdeps: package lib32-libxrandr-1.3.2-2
    debug: checkdeps: package lib32-libxi-1.6.1-1
    debug: checkdeps: package lib32-attr-2.4.46-2
    debug: checkdeps: package lib32-acl-2.2.51-2
    debug: checkdeps: package lib32-gettext-0.18.1.1-2
    debug: checkdeps: package wine-1.5.8-1
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-zlib-1.2.7-1-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-zlib
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-bzip2-1.0.6-1-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-bzip2
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-freetype2-2.4.10-1-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-freetype2
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-fontconfig-2.8.0-4-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-fontconfig
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-libice-1.0.8-1-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-libice
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-util-linux-2.21.2-1-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-util-linux
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-libsm-1.2.1-1-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-libsm
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxt-1.1.3-1-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-libxt
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-gcc-libs-4.7.1-4.1-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-gcc-libs
    debug: setting download size 138244 for pkg lib32-mesa
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxrender-0.9.7-1-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-libxrender
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxcursor-1.1.13-1-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-libxcursor
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxrandr-1.3.2-2-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-libxrandr
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxi-1.6.1-1-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-libxi
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-attr-2.4.46-2-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-attr
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-acl-2.2.51-2-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-acl
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-gettext-0.18.1.1-2-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg lib32-gettext
    debug: found cached pkg: /var/cache/pacman/pkg/wine-1.5.8-1-x86_64.pkg.tar.xz
    debug: setting download size 0 for pkg wine
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    debug: returning error 31 from alpm_db_get_pkg : could not find or read package
    Targets (18): lib32-acl-2.2.51-2 lib32-attr-2.4.46-2 lib32-bzip2-1.0.6-1
    lib32-fontconfig-2.8.0-4 lib32-freetype2-2.4.10-1
    lib32-gcc-libs-4.7.1-4.1 lib32-gettext-0.18.1.1-2
    lib32-libice-1.0.8-1 lib32-libsm-1.2.1-1
    lib32-libxcursor-1.1.13-1 lib32-libxi-1.6.1-1
    lib32-libxrandr-1.3.2-2 lib32-libxrender-0.9.7-1
    lib32-libxt-1.1.3-1 lib32-mesa-8.0.3-3.2
    lib32-util-linux-2.21.2-1 lib32-zlib-1.2.7-1 wine-1.5.8-1
    Total Download Size: 0.13 MiB
    Total Installed Size: 247.69 MiB
    Proceed with installation? [Y/n] y
    debug: using cachedir: /var/cache/pacman/pkg/
    :: Retrieving packages from multilib...
    debug: url: http://archlinux.supsec.org/multilib/os/x86_64/lib32-mesa-8.0.3-3.2-x86_64.pkg.tar.xz
    debug: maxsize: 138244
    debug: opened tempfile for download: /var/cache/pacman/pkg/lib32-mesa-8.0.3-3.2-x86_64.pkg.tar.xz.part (wb)
    downloading lib32-mesa-8.0.3-3.2-x86_64.pkg.tar.xz...
    debug: curl returned error 0 from transfer
    debug: response code: 200
    debug: using cachedir: /var/cache/pacman/pkg/
    checking package integrity...
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-zlib-1.2.7-1-x86_64.pkg.tar.xz
    debug: sig data: iQEcBAABAgAGBQJPokRtAAoJEH8tQ0uXQeisMKoIAKwa7/myZVxPxiIoP/atCYekMxcl2/LDKzaoCKNVdrUdUfLnaSLPnNDFOb0LcYAZjbFxruRvF1Ojtc1drwjxGjbRKnWD9RNC5fRd0ZN6V/+2agKg0nooQd2TMH7M2cVYZefQTFslULb1fJco/14YIarGrVsGjTO4T8B3QycVcKk4LFTuTt8i9ALbzEDxDim3sJeYySsH7FBwcD9vuLSONGeMQFKnKEYl9O2y93Bapcqk6oIsNY8vPxcbU3T/l3HsSssgS6ZG9oAeQbafiBRkeQKTZPfX98q9bySrLYHAtjkEsciGhf4kuGUriwfKIlm36xz89nn2Rrc08DAwxDAodmM=
    debug: GPGME version: 1.3.1
    debug: GPGME engine info: file=/usr/bin/gpg, home=/etc/pacman.d/gnupg/
    debug: checking signature for /var/cache/pacman/pkg/lib32-zlib-1.2.7-1-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1336034413
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC, Pierre Schmitz <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-bzip2-1.0.6-1-x86_64.pkg.tar.xz
    debug: sig data: iQEcBAABAgAGBQJOOV5HAAoJEOjxi6FhUTe8tKAIAOA82aijL1mPu0UlK3NSXQ7IqltDEZVI1V3RAB22+FBNngj19Bu5KRw2XOel9ObDif1+gXA0kYJLG0K/MIVO3zue9ueTruDGvaOPPwFcMX2b9wbKwcfbJL5rxWdE6OX97scD3e61XMTn0UbeinJG8HOS4INhVdTuctgpczcMTMkmkq7+Ov14PC1v4HFEHhMslpjtt8/+/q+CtXOLQVFQO1CL8oFF+2EqttA01lth3v+XIMUssOJfakxsB5coY2RstGfk49US6YZN8TqOfDDoM9wVoeVDRDQtts7cOnmGb3eJRk3AWRmjxRXsSqOs/nOAYHh34QA9LR5QqzmytjiM9Ko=
    debug: checking signature for /var/cache/pacman/pkg/lib32-bzip2-1.0.6-1-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: F4DDD6DDCEC320B665F502AAE8F18BA1615137BC
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1312382535
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: F4DDD6DDCEC320B665F502AAE8F18BA1615137BC, Ionut Biru <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-freetype2-2.4.10-1-x86_64.pkg.tar.xz
    debug: sig data: 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
    debug: checking signature for /var/cache/pacman/pkg/lib32-freetype2-2.4.10-1-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: CFA6AF15E5C74149FC1D8C086D1655C14CE1C13E
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1339841227
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: CFA6AF15E5C74149FC1D8C086D1655C14CE1C13E, Florian Pritz <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-fontconfig-2.8.0-4-x86_64.pkg.tar.xz
    debug: sig data: iQEcBAABAgAGBQJPMsOJAAoJEH8tQ0uXQeisrKUIAJYqx847RjgkMSvGYZBRooJtdvTPpvLilwG/VngfgQXEWSUhzIhKecmPkmCIaSBd3Fdh6ScLdX/TREUpqxhpX3BTddJk0TCRDKZE1AR3nP2IMNssB9hos8cKzmiOvkEUxRB1TUuzszwnp3nePyJLdeb/8PEeacxO6qHtOuSsvJrcjktwBgthM8GqzMjuvNwB8GnB9NYb3DRfAgcJy4UoY4y6+J58qzw9lElMc1v4WbAp0TR9PqrFXjNlb96j9oy/jXTTy63wGURPcLkY3xqrjnR5wrtD0zKbNy7D8P6Lg+xHZ/lEjahb1AmuW8H+BTA6Gdo1KjaNjTW7uAim9xSJ+1A=
    debug: checking signature for /var/cache/pacman/pkg/lib32-fontconfig-2.8.0-4-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1328726921
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC, Pierre Schmitz <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-libice-1.0.8-1-x86_64.pkg.tar.xz
    debug: sig data: iQEcBAABAgAGBQJPZe3GAAoJEAYJamrRzt2sQb4IALRdVJ8k6HvFXOLJGA5yPWGRVyn1dkaGXxfe9HEb9wMuzD+WvRfZhTGDL65yIemyRt9beR4jQJGmpm8WGxvikaM9bQ23Gjnh9rAd1uMymI2LX28A71YEijkazz00NVg5wRm6jIfb6NROMKsR9zit+JpYZrIZS1RUhmj9kP5c+MnNogDyrePT/OcWkAJng81/RlWZ/NVTVEedRiale6wdpLSZefKcro/F23hvCknUOaTFAUn7R6NwZqi7iD+S5SZAaxIuU2P9c0Pvw6U5ReEuvX3ABMbUO+bYVGFA+gRZtEzzhJimRrmTpZllRvYQHE/PAn21/YjuxhkOv5CBWCb6faI=
    debug: checking signature for /var/cache/pacman/pkg/lib32-libice-1.0.8-1-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: 535F8C0339450F054A4D282706096A6AD1CEDDAC
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1332080070
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: 535F8C0339450F054A4D282706096A6AD1CEDDAC, Laurent Carlier <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-util-linux-2.21.2-1-x86_64.pkg.tar.xz
    debug: sig data: iQEcBAABAgAGBQJP2w6FAAoJEB6yY4/1bAxTdAsH/3f62YRlJIlSngw9cSE7M/9Zw286SLlZe4Oxs7HQOvqxrG502XdSjGksdxhLLOu4bQo/EtgxmSBZGacj7KTTnH3sCPnD2s+pjLwsQuQ9CMyAk9kZ0rv93uRPiKusKjMWCdMMgHswJbkB13Je9I/u/X9E2eGpQVPREzhyiCZglJtP70/gXtT9s53wkIIHQGPemEsTSNRkinpJAmT3Ck4P5PECWU3G7KUBRO0k5faJEWM7oso7u3ZAFNS43nm3wVXjeHRpWQ0Kyl4Cd7DC9AukOs2AGT0mwoBqhpoU11B6YAYkKHZvnTK+Fcxcz78o5pOaK2aOngwhv2PRjegHTe2aQM8=
    debug: checking signature for /var/cache/pacman/pkg/lib32-util-linux-2.21.2-1-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: 487EACC08557AD082088DABA1EB2638FF56C0C53
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1339756165
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: 487EACC08557AD082088DABA1EB2638FF56C0C53, Dave Reisner <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-libsm-1.2.1-1-x86_64.pkg.tar.xz
    debug: sig data: iQEcBAABAgAGBQJPcD6IAAoJEH8tQ0uXQeis+sMH/jRQaC5dy9MGPDj8VnwIvONSi6/IWnFnuYQf2EMqkgA0ch3J/V7DUFZqh+o0IorgILCOC4laBuGpunccUptsUVG/0et9lbhAbF9nh08OhTsP18VWrcFfQfY7SQBvOj8ZJIgqj6Q/GLfUOkFo4icM8/S1/WPYgL2NWT1KYzVvWMrmmNifcN4iDulqBKtuFvsSH7d8QNaC8uLj0l7hO/lkFmDlabd8tPhn2en31cxwuALgTT3EniAhN0HuD4ds/smggkC+ysa9v5yr68Qexn9UcyMUxojYnTci0DVKe6LAG8cW6jNh9eN4/38hKsn+FopwRyFCAl2Z/79Bv3mHhU5cUco=
    debug: checking signature for /var/cache/pacman/pkg/lib32-libsm-1.2.1-1-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1332756104
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC, Pierre Schmitz <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxt-1.1.3-1-x86_64.pkg.tar.xz
    debug: sig data: iQEcBAABAgAGBQJPcD6hAAoJEH8tQ0uXQeispi4H/jsr+PJlIk4PufVsswlSRR5Cn176n41tv9RsdjKpBjZrnROXk9XcOki0Nbw/3m8Gjh7ARyF5MN6M6RrWv+10EiQ0UGLYA9tnPhNBthkSUARyIh7abipRuCJT3twEEYaLdYiYE99Ep8ZYuvEYnAitGoVj7KU9eK9KSCRlmylzDbAPU4mWOQbjPrOe0j/AH1SJcKwMH/DTl6NMTmh4bLYR9jhvSdL70zjHex2DpKndndYB/gboN8nV0783Xb1zMwzn3icV7Nd3dCSo3eiEukIRTL2q7Bddl93rLp+86vxBbFXxBtJF73H4vSoPEBViEUNIZnFU8yk5kPgucPMTfG3jGqs=
    debug: checking signature for /var/cache/pacman/pkg/lib32-libxt-1.1.3-1-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1332756129
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC, Pierre Schmitz <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-gcc-libs-4.7.1-4.1-x86_64.pkg.tar.xz
    debug: sig data: iQEcBAABAgAGBQJP+AxCAAoJEKXpKIxPpBX6E9wIAIFT9s8cRudfr1fYOp2VRGhNtERbrF+XW0L0xMTGDTeKYgp7DA+LOcHkhqBoyzJz/fgLbfUM0udNxg6qCwdHDe7sfoZOXLKjPZUXgxWtbqic5XcLgP0Z/COFJszhrnoLTV99jzy3lwHLDEk7NV5If8s7YVUHla5/LSsR5D4sti23EhWT0B/PSFHYsxijklrShWqnbELAoC7pQvdWnx8op1rZhDc8+nkd2FaMBleWVlRxhym2E1CNhPY2pbMXBsAuoX+6MH+fiK7b7v0lCVwUT7BTH7frJC3EQmKzuXCzD/nRjhcK45xYN6WZepPAflQKE1z+Liz/XOqXcr5Q8TNndQI=
    debug: checking signature for /var/cache/pacman/pkg/lib32-gcc-libs-4.7.1-4.1-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: 8218F88849AAC522E94CF470A5E9288C4FA415FA
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1341656130
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: 8218F88849AAC522E94CF470A5E9288C4FA415FA, Jan Alexander Steffens (heftig) <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: returning error 6 from _alpm_pkg_validate_internal : wrong or NULL argument passed
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxrender-0.9.7-1-x86_64.pkg.tar.xz
    debug: sig data: iQEcBAABAgAGBQJPcD33AAoJEH8tQ0uXQeisxWcIAKe3nQBGwv7E0Bj1Yg7w8NR6Qn0VWHCa6eGCzivBZC6N/FfNUz/QBB2xtsRdpHK15PjIVEu7TBSFznksSpNLxZgto/ZGto7iHWmMATgyedDlFispIeR8DcPHd/EuAddS/SoXaQq3vxEbYUkhclu9AnQJIKS+6OGcNufKLDBcNJ636JGH99w1yeIic97Xfxhvj7wQo5io0yRXi+PhT2KWSqw1nafPyXxRBLGRQZLWSLHITcSA3bXwSPxLo3c3v3MGgcUK4q8czenwGlOqSPCeXRGyiN3yyU0r474KGj5qEz1UDHsrvTXH0ZIjiYVzbmuKfqsCx6Pugjp73QM4JjyDZJs=
    debug: checking signature for /var/cache/pacman/pkg/lib32-libxrender-0.9.7-1-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1332755959
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC, Pierre Schmitz <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxcursor-1.1.13-1-x86_64.pkg.tar.xz
    debug: sig data: iQEcBAABAgAGBQJPcDgmAAoJEH8tQ0uXQeis7SgIAKYEyL/JifHsVuS136Ehgs/rvGHTww/DFmUdqpD4xiuepqyD+G+eRlOlwPA4DYRQiaRkifF1yFr8p6Tsu07LeTnJuLtayjzwLDpBMSO+nRETQdwijMzkXz35b4shLsvMJJc+m121INOva56LTbca8PeW49d3JqecNDE2KQ2cSzfMmvFbHADl/DSb+Hl/zt6L5a/aELLBvT8FAHf7fb8FyYdeFOAsq+0WbXy/Uee9OZc6vlQaUxjtgesRS/XBlHbMiX9NRPbeHQbtQERQCwOCN4UfLLhpNvMzBNf6UhxfNOoh62VXaDLhfaYRnWbN6l4+hRJbGSZ2fUR2FwKt4sSPpCo=
    debug: checking signature for /var/cache/pacman/pkg/lib32-libxcursor-1.1.13-1-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1332754470
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: 4AA4767BBC9C4B1D18AE28B77F2D434B9741E8AC, Pierre Schmitz <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxrandr-1.3.2-2-x86_64.pkg.tar.xz
    debug: sig data: iQEcBAABAgAGBQJPZfPuAAoJEAYJamrRzt2suJ4H/RQfZMuETuDRlK2QG+jrfJGc6VkH9A8pj9UZWyM94/n8SsX+IFzP0J7Rym8ErdzxWC+TRpcYMkPFwip8qqANmLsfm/erkzzbj+47ynkY/iLY1aRRfUIGNVmgOztbtOl6GmA/8HImUdLnsy9z4lOUEQcjQCHkQ6r2kt9FDeC8SMZPV5+0i52AWQHzGXOB61g8CNtgXNYPoPLx0VqhEeHdlk24WCX4WY0DIuE3LTxrQIqXDF9ivbx93bJ/oU6woiPQoIPvCo/z5O6vJtZ8Z1/RUZEeYDYf+T+7sqCYYMoMhv2nx/7zbxY1pfJudF5/p22mqT6J9tmIa+xubQpX8adalaw=
    debug: checking signature for /var/cache/pacman/pkg/lib32-libxrandr-1.3.2-2-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: 535F8C0339450F054A4D282706096A6AD1CEDDAC
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1332081646
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: 535F8C0339450F054A4D282706096A6AD1CEDDAC, Laurent Carlier <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-libxi-1.6.1-1-x86_64.pkg.tar.xz
    debug: sig data: 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
    debug: checking signature for /var/cache/pacman/pkg/lib32-libxi-1.6.1-1-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: CFA6AF15E5C74149FC1D8C086D1655C14CE1C13E
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1337011752
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: CFA6AF15E5C74149FC1D8C086D1655C14CE1C13E, Florian Pritz <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-attr-2.4.46-2-x86_64.pkg.tar.xz
    debug: sig data: iQEcBAABAgAGBQJO85p/AAoJEAYJamrRzt2sDKgIAKhpVKclFgrplruauivX5GnNjFiZI7hW+n8glKwI2ODLfk+pDBhp//8bcFMXaNPThpo9hmjfhBFYIjxlPeE8GXkVZO8RG57sPNdBcRYjjA2mJm1cZKVVGq+qDHStmMneg7xOQpkAOHDYlTRb8LTIVkAaIJLXHBG3xUq1hy6Ub+x738SZtXa9P4dZRGAHcu0+OkXjzADoTWX4UoOvFmHRNtmmVwqDEmOJFU48py5GTJEeDOAUlciC7X618MJuURNK3zMQt/bgbl4drlxTR1aj88M4B92le26TedyIGhpHiQDj4ypgH9jo9E+XK1YYH4SCEH6wCp0wRP1YUsfzseGWSDc=
    debug: checking signature for /var/cache/pacman/pkg/lib32-attr-2.4.46-2-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: 535F8C0339450F054A4D282706096A6AD1CEDDAC
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1324587647
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: 535F8C0339450F054A4D282706096A6AD1CEDDAC, Laurent Carlier <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-acl-2.2.51-2-x86_64.pkg.tar.xz
    debug: sig data: iQEcBAABAgAGBQJOtGQ7AAoJEAYJamrRzt2szZwH/jh6JYpBPx9KINShjXlzlTvmpuBIKEUKFlS1Wwe3D6pJ5hDMaMh7LjQma5bxVCpxdh/dI87u4838wHJNWUAv1Qj57f0VRo/N65Mc5X43s7gdJH+yJ5sQP54uiGhKvYcW2iJ0tmd/Iq+p7Yjb9Qe43CN3a5NPNPd5KUPWTSHlVML5ui4uxJEUAgESrhZ/3eMB7qyDZM9EN8JvkAIrNAFTq5dNHaD8+9WZG+Zfo9EyMrtM2E768YyR2a9So5ilyjFBYgVl7b7MEpQ+As5LmwY+bihiLxun6AZ9Xl8suGGstaULUW0ngdfPBbDe0JNR9HUIzzWQUOuLnYqXkBpNfKYfqBE=
    debug: checking signature for /var/cache/pacman/pkg/lib32-acl-2.2.51-2-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: 535F8C0339450F054A4D282706096A6AD1CEDDAC
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1320444987
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: 535F8C0339450F054A4D282706096A6AD1CEDDAC, Laurent Carlier <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: found cached pkg: /var/cache/pacman/pkg/lib32-gettext-0.18.1.1-2-x86_64.pkg.tar.xz
    debug: sig data: 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
    debug: checking signature for /var/cache/pacman/pkg/lib32-gettext-0.18.1.1-2-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: CFA6AF15E5C74149FC1D8C086D1655C14CE1C13E
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1322864785
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: CFA6AF15E5C74149FC1D8C086D1655C14CE1C13E, Florian Pritz <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: found cached pkg: /var/cache/pacman/pkg/wine-1.5.8-1-x86_64.pkg.tar.xz
    debug: sig data: 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
    debug: checking signature for /var/cache/pacman/pkg/wine-1.5.8-1-x86_64.pkg.tar.xz
    debug: 1 signatures returned
    debug: fingerprint: 8FC15A064950A99DD1BD14DD39E4B877E62EB915
    debug: summary: valid
    debug: summary: green
    debug: status: Success
    debug: timestamp: 1341354649
    debug: exp_timestamp: 0
    debug: validity: full; reason: Success
    debug: key: 8FC15A064950A99DD1BD14DD39E4B877E62EB915, Sven-Hendrik Haase <[email protected]>, owner_trust unknown, disabled 0
    debug: signature is valid
    debug: signature is fully trusted
    debug: returning error 33 from check_validity : invalid or corrupted package
    error: failed to commit transaction (invalid or corrupted package)
    Errors occurred, no packages were upgraded.
    debug: unregistering database 'local'
    debug: freeing package cache for repository 'local'
    debug: unregistering database 'catalyst'
    debug: freeing package cache for repository 'catalyst'
    debug: unregistering database 'core'
    debug: freeing package cache for repository 'core'
    debug: unregistering database 'extra'
    debug: freeing package cache for repository 'extra'
    debug: unregistering database 'community'
    debug: freeing package cache for repository 'community'
    debug: unregistering database 'multilib'
    debug: freeing package cache for 'multilib'
    Anyone have any hints for solving this?
    EDIT: running pacman update seems to have fixed this issue
    Last edited by duke11235 (2012-07-13 19:04:50)

    Ah, my mistake was an incorrect partition table back when I partitioned the disk. I did not make a partition table for GPT partitions.

  • Oracle Installed failed

    I am trying to install Oracle database on Linux and install failed with the following error:
    genclntsh: genclntsh: Could not locate /oracle/product/10g/network/admin/shrept.lst
    *** Error exit code 1

    There is a classic bug related to this.
    cat << EOS >/oracle/product/10g/network/admin/shrept.lst
    network : snaumihi_inithostinfo
    network : snaumbg_gmt
    network : naedpwd_encrypt
    network : naumbsb_bld_singlebyte
    network : ztapis
    EOS
    and retry button in OUI

  • Oracle Apps R12 post install fails.

    Hi All, I am trying to install Oracle Apps r12 on Ubuntu 8.10, after everything went good,,,the post install failed with all entries having red cross.
    it said
    HTTP server not responding
    JSP page is not responding
    Database file was created
    Login Page is not responding
    Help page is not responding
    environment file was not created
    Vitual Directory page not responding
    Can some please help me with this, i have been trying to install Oracle Apps R12 for a long long time.
    Thanks.

    Thanks for replying.
    I tried to install Oracle Enterprise Linux 5 but i was not able to connect to the internet with that OS so i chose Ubuntu 8.10. I have Intel wifi 5000 card,,,,which was not working in OEL 5. If you have any fix for that, then I will certainly switch to OEL 5.
    Please help.
    thanks.

  • "install failed: not enough install space" error

    I have a Palm Pre and am getting a "install failed: not enough install space" error when I try to install an app unless I remove one first.
    The phone shows that I have 5.8GB of space left.
    I'm guessing that this means there is a limit as to the number of apps that can be installed.
    Does any one know of any way to increase the number of apps that can be installed?
    If not I guess I'll kill some of the worthless Spring apps on there...
    Any help you can provide would be appreciated.
    Thanks!
    Christian 
    Post relates to: Pre p100eww (Sprint)
    Post relates to: Pre p100eww (Sprint)

    I am at WebOS 1.1.0. The app itself does not matter, i.e. I can uninstall an app and after that, I can add another. When I get the error, it does not matter what app I tried to install, from where, or what method.
    I can replicate the issue no matter how I try to install an app: 
    Through the official Palm store (developer mode on or off doesn't matter): I get an error "Sorry, Not Enough Memory. Please delete an application you have installed to make room"
    Through FileCoaster: I get an error "install failed: not enough install space" error" 
    Through the SDK "drop to install" method: a DOS window opens and it looks like it's installing the app, but it never shows on the phone, so the install seems to fail
    I haven't tried installing the app through Novaterm, if it helps narrowing down the issue, please let me know and I'll give that a shot.
    Based on Flipflop 84's comments, it seems like there seems to be a limited amount of space reserved for apps (since he has less apps than me and is getting the error) rather than the number of apps being the issue. 5.8GB of free space are somewhat worthless if I can't use the space for apps, so I'd like to allocate an additional Gig of that to apps.
    So I guess the question has changed to "how do I increase the amount of space available on the Pre for installing apps?"
    I would think that would be simple for the Linux Gurus out there that seem to be able to disect and analyze the WebOS down to the atom level, but surprisingly, I haven't been able to find any information on it (and I'm a Linux noob myself, so I'd have to clue where to start looking).
    If you guys need me to try anything or need more information on anything, please let me know. 
    I appreciate everyone's help with this!
    Christian 

  • Component SMS_Contol_manager and SMS_Notification_server install failed on SCCM2012

    we have try to uninstall client and remove the ccm namespace from wmi, and reisntall MP, no luck
    below log from mpmsi.log.lasterror
    === Verbose logging started: 8/27/2014  20:50:23  Build type: SHIP UNICODE 5.00.9600.00  Calling process: H:\Program Files\Microsoft Configuration Manager\bin\x64\rolesetup.exe ===
    MSI (c) (9C:58) [20:50:23:592]: Resetting cached policy values
    MSI (c) (9C:58) [20:50:23:592]: Machine policy value 'Debug' is 0
    MSI (c) (9C:58) [20:50:23:592]: ******* RunEngine:
               ******* Product: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (9C:58) [20:50:23:592]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (9C:58) [20:50:23:592]: Grabbed execution mutex.
    MSI (c) (9C:58) [20:50:23:594]: Cloaking enabled.
    MSI (c) (9C:58) [20:50:23:594]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (9C:58) [20:50:23:594]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (24:FC) [20:50:23:598]: Running installation inside multi-package transaction h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
    MSI (s) (24:FC) [20:50:23:598]: Grabbed execution mutex.
    MSI (s) (24:48) [20:50:23:599]: Resetting cached policy values
    MSI (s) (24:48) [20:50:23:599]: Machine policy value 'Debug' is 0
    MSI (s) (24:48) [20:50:23:599]: ******* RunEngine:
               ******* Product: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (s) (24:48) [20:50:23:599]: Machine policy value 'DisableUserInstalls' is 0
    MSI (s) (24:48) [20:50:23:603]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
    MSI (s) (24:48) [20:50:23:605]: SRSetRestorePoint skipped for this transaction.
    MSI (s) (24:48) [20:50:23:606]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer 3: 2
    MSI (s) (24:48) [20:50:23:607]: File will have security applied from OpCode.
    MSI (s) (24:48) [20:50:23:619]: SOFTWARE RESTRICTION POLICY: Verifying package --> 'h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi' against software restriction policy
    MSI (s) (24:48) [20:50:23:619]: SOFTWARE RESTRICTION POLICY: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi has a digital signature
    MSI (s) (24:48) [20:50:23:619]: SOFTWARE RESTRICTION POLICY: h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi is permitted to run because the user token authorizes execution (system or service token).
    MSI (s) (24:48) [20:50:23:619]: MSCOREE not loaded loading copy from system32
    MSI (s) (24:48) [20:50:23:621]: End dialog not enabled
    MSI (s) (24:48) [20:50:23:621]: Original package ==> h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
    MSI (s) (24:48) [20:50:23:621]: Package we're running from ==> C:\Windows\Installer\6257f6f.msi
    MSI (s) (24:48) [20:50:23:624]: APPCOMPAT: Compatibility mode property overrides found.
    MSI (s) (24:48) [20:50:23:624]: APPCOMPAT: looking for appcompat database entry with ProductCode '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'.
    MSI (s) (24:48) [20:50:23:624]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (24:48) [20:50:23:626]: Machine policy value 'TransformsSecure' is 1
    MSI (s) (24:48) [20:50:23:627]: Note: 1: 2262 2: MsiFileHash 3: -2147287038
    MSI (s) (24:48) [20:50:23:627]: Machine policy value 'DisablePatch' is 0
    MSI (s) (24:48) [20:50:23:627]: Machine policy value 'AllowLockdownPatch' is 0
    MSI (s) (24:48) [20:50:23:627]: Machine policy value 'DisableLUAPatching' is 0
    MSI (s) (24:48) [20:50:23:627]: Machine policy value 'DisableFlyWeightPatching' is 0
    MSI (s) (24:48) [20:50:23:627]: APPCOMPAT: looking for appcompat database entry with ProductCode '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'.
    MSI (s) (24:48) [20:50:23:627]: APPCOMPAT: no matching ProductCode found in database.
    MSI (s) (24:48) [20:50:23:627]: Transforms are not secure.
    MSI (s) (24:48) [20:50:23:628]: PROPERTY CHANGE: Adding MsiLogFileLocation property. Its value is 'h:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log'.
    MSI (s) (24:48) [20:50:23:628]: Command Line: CCMINSTALLDIR=h:\Program Files\SMS_CCM CCMSERVERDATAROOT=h:\Program Files\Microsoft Configuration Manager USESMSPORTS=TRUE SMSPORTS=80 USESMSSSLPORTS=TRUE SMSSSLPORTS=443 USESMSSSL=TRUE SMSSSLSTATE=0 CCMENABLELOGGING=TRUE
    CCMLOGLEVEL=1 CCMLOGMAXSIZE=1000000 CCMLOGMAXHISTORY=1 CURRENTDIRECTORY=H:\Program Files\Microsoft Configuration Manager\bin\x64 CLIENTUILEVEL=3 MSICLIENTUSESEXTERNALUI=1 CLIENTPROCESSID=6556
    MSI (s) (24:48) [20:50:23:628]: Product Code passed to Engine.Initialize:           ''
    MSI (s) (24:48) [20:50:23:628]: Product Code from property table before transforms: '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'
    MSI (s) (24:48) [20:50:23:628]: Product Code from property table after transforms:  '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}'
    MSI (s) (24:48) [20:50:23:628]: Product not registered: beginning first-time install
    MSI (s) (24:48) [20:50:23:630]: Machine policy value 'DisableMsi' is 1
    MSI (s) (24:48) [20:50:23:630]: Product {6CED3AB0-05AF-4C81-8DBE-A62661C26F40} is not managed.
    MSI (s) (24:48) [20:50:23:630]: MSI_LUA: Credential prompt not required, user is an admin
    MSI (s) (24:48) [20:50:23:630]: PROPERTY CHANGE: Adding ProductState property. Its value is '-1'.
    MSI (s) (24:48) [20:50:23:630]: Entering CMsiConfigurationManager::SetLastUsedSource.
    MSI (s) (24:48) [20:50:23:630]: User policy value 'SearchOrder' is 'nmu'
    MSI (s) (24:48) [20:50:23:630]: Adding new sources is allowed.
    MSI (s) (24:48) [20:50:23:630]: PROPERTY CHANGE: Adding PackagecodeChanging property. Its value is '1'.
    MSI (s) (24:48) [20:50:23:630]: Package name extracted from package path: 'mp.msi'
    MSI (s) (24:48) [20:50:23:630]: Package to be registered: 'mp.msi'
    MSI (s) (24:48) [20:50:23:631]: Note: 1: 2262 2: AdminProperties 3: -2147287038
    MSI (s) (24:48) [20:50:23:631]: Machine policy value 'AlwaysInstallElevated' is 0
    MSI (s) (24:48) [20:50:23:631]: User policy value 'AlwaysInstallElevated' is 0
    MSI (s) (24:48) [20:50:23:631]: Product installation will be elevated because user is admin and product is being installed per-machine.
    MSI (s) (24:48) [20:50:23:631]: Running product '{6CED3AB0-05AF-4C81-8DBE-A62661C26F40}' with elevated privileges: Product is assigned.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMINSTALLDIR property. Its value is 'h:\Program Files\SMS_CCM'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMSERVERDATAROOT property. Its value is 'h:\Program Files\Microsoft Configuration Manager'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding USESMSPORTS property. Its value is 'TRUE'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding SMSPORTS property. Its value is '80'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding USESMSSSLPORTS property. Its value is 'TRUE'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding SMSSSLPORTS property. Its value is '443'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding USESMSSSL property. Its value is 'TRUE'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding SMSSSLSTATE property. Its value is '0'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMENABLELOGGING property. Its value is 'TRUE'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMLOGLEVEL property. Its value is '1'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMLOGMAXSIZE property. Its value is '1000000'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CCMLOGMAXHISTORY property. Its value is '1'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CURRENTDIRECTORY property. Its value is 'H:\Program Files\Microsoft Configuration Manager\bin\x64'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CLIENTUILEVEL property. Its value is '3'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding MSICLIENTUSESEXTERNALUI property. Its value is '1'.
    MSI (s) (24:48) [20:50:23:631]: PROPERTY CHANGE: Adding CLIENTPROCESSID property. Its value is '6556'.
    MSI (s) (24:48) [20:50:23:631]: Machine policy value 'DisableAutomaticApplicationShutdown' is 0
    MSI (s) (24:48) [20:50:23:632]: PROPERTY CHANGE: Adding MsiRestartManagerSessionKey property. Its value is 'd8d0cefc1249514889002637bb750a41'.
    MSI (s) (24:48) [20:50:23:632]: RESTART MANAGER: Session opened.
    MSI (s) (24:48) [20:50:23:632]: PROPERTY CHANGE: Adding MsiSystemRebootPending property. Its value is '1'.
    MSI (s) (24:48) [20:50:23:632]: TRANSFORMS property is now:
    MSI (s) (24:48) [20:50:23:632]: PROPERTY CHANGE: Adding VersionDatabase property. Its value is '200'.
    MSI (s) (24:48) [20:50:23:633]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming
    MSI (s) (24:48) [20:50:23:634]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Favorites
    MSI (s) (24:48) [20:50:23:634]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts
    MSI (s) (24:48) [20:50:23:635]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Documents
    MSI (s) (24:48) [20:50:23:635]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts
    MSI (s) (24:48) [20:50:23:636]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent
    MSI (s) (24:48) [20:50:23:636]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo
    MSI (s) (24:48) [20:50:23:637]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Templates
    MSI (s) (24:48) [20:50:23:637]: SHELL32::SHGetFolderPath returned: C:\ProgramData
    MSI (s) (24:48) [20:50:23:638]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Local
    MSI (s) (24:48) [20:50:23:638]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Pictures
    MSI (s) (24:48) [20:50:23:639]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (s) (24:48) [20:50:23:640]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (s) (24:48) [20:50:23:640]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu\Programs
    MSI (s) (24:48) [20:50:23:641]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Start Menu
    MSI (s) (24:48) [20:50:23:641]: SHELL32::SHGetFolderPath returned: C:\Users\Public\Desktop
    MSI (s) (24:48) [20:50:23:642]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Administrative Tools
    MSI (s) (24:48) [20:50:23:643]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Startup
    MSI (s) (24:48) [20:50:23:643]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu\Programs
    MSI (s) (24:48) [20:50:23:644]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Start Menu
    MSI (s) (24:48) [20:50:23:644]: SHELL32::SHGetFolderPath returned: C:\Windows\system32\config\systemprofile\Desktop
    MSI (s) (24:48) [20:50:23:645]: SHELL32::SHGetFolderPath returned: C:\ProgramData\Microsoft\Windows\Templates
    MSI (s) (24:48) [20:50:23:645]: SHELL32::SHGetFolderPath returned: C:\Windows\Fonts
    MSI (s) (24:48) [20:50:23:645]: Note: 1: 2898 2: MS Sans Serif 3: MS Sans Serif 4: 0 5: 16
    MSI (s) (24:48) [20:50:23:648]: MSI_LUA: Setting MsiRunningElevated property to 1 because the install is already running elevated.
    MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding MsiRunningElevated property. Its value is '1'.
    MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding Privileged property. Its value is '1'.
    MSI (s) (24:48) [20:50:23:648]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (s) (24:48) [20:50:23:648]: Note: 1: 1402 2: HKEY_CURRENT_USER\Software\Microsoft\MS Setup (ACME)\User Info 3: 2
    MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding DATABASE property. Its value is 'C:\Windows\Installer\6257f6f.msi'.
    MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding OriginalDatabase property. Its value is 'h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi'.
    MSI (s) (24:48) [20:50:23:648]: Machine policy value 'MsiDisableEmbeddedUI' is 0
    MSI (s) (24:48) [20:50:23:648]: EEUI - Disabling MsiEmbeddedUI due to existing external or embedded UI
    MSI (s) (24:48) [20:50:23:648]: EEUI - Disabling MsiEmbeddedUI for service because it's not a quiet/basic install
    MSI (s) (24:48) [20:50:23:648]: Note: 1: 2205 2:  3: PatchPackage
    MSI (s) (24:48) [20:50:23:648]: Machine policy value 'DisableRollback' is 0
    MSI (s) (24:48) [20:50:23:648]: User policy value 'DisableRollback' is 0
    MSI (s) (24:48) [20:50:23:648]: PROPERTY CHANGE: Adding UILevel property. Its value is '2'.
    === Logging started: 8/27/2014  20:50:23 ===
    MSI (s) (24:48) [20:50:23:649]: Note: 1: 2203 2: C:\Windows\Installer\inprogressinstallinfo.ipi 3: -2147287038
    MSI (s) (24:48) [20:50:23:649]: APPCOMPAT: [DetectVersionLaunchCondition] Launch condition already passes.
    MSI (s) (24:48) [20:50:23:649]: PROPERTY CHANGE: Adding ACTION property. Its value is 'INSTALL'.
    MSI (s) (24:48) [20:50:23:649]: Doing action: INSTALL
    Action start 20:50:23: INSTALL.
    MSI (s) (24:48) [20:50:23:650]: Running ExecuteSequence
    MSI (s) (24:48) [20:50:23:650]: Doing action: System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933
    MSI (s) (24:48) [20:50:23:650]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933'
    MSI (s) (24:48) [20:50:23:650]: PROPERTY CHANGE: Adding System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933 property. Its value is 'C:\Windows\system32\'.
    Action start 20:50:23: System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933.
    MSI (s) (24:48) [20:50:23:651]: Doing action: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933
    Action ended 20:50:23: System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933. Return value 1.
    MSI (s) (24:48) [20:50:23:651]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933'
    MSI (s) (24:48) [20:50:23:651]: PROPERTY CHANGE: Adding SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933 property. Its value is 'C:\Windows\SysWOW64\'.
    Action start 20:50:23: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933.
    MSI (s) (24:48) [20:50:23:651]: Doing action: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3
    Action ended 20:50:23: SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933. Return value 1.
    MSI (s) (24:48) [20:50:23:652]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3'
    MSI (s) (24:48) [20:50:23:652]: PROPERTY CHANGE: Adding SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3 property. Its value is 'C:\Windows\SysWOW64\'.
    Action start 20:50:23: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3.
    MSI (s) (24:48) [20:50:23:652]: Doing action: System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3
    Action ended 20:50:23: SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3. Return value 1.
    MSI (s) (24:48) [20:50:23:652]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3'
    MSI (s) (24:48) [20:50:23:652]: PROPERTY CHANGE: Adding System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3 property. Its value is 'C:\Windows\system32\'.
    Action start 20:50:23: System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3.
    MSI (s) (24:48) [20:50:23:653]: Doing action: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61
    Action ended 20:50:23: System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3. Return value 1.
    MSI (s) (24:48) [20:50:23:653]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
    MSI (s) (24:48) [20:50:23:653]: PROPERTY CHANGE: Adding SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61 property. Its value is 'C:\Windows\SysWOW64\'.
    Action start 20:50:23: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61.
    MSI (s) (24:48) [20:50:23:653]: Doing action: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61
    Action ended 20:50:23: SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61. Return value 1.
    MSI (s) (24:48) [20:50:23:654]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61'
    MSI (s) (24:48) [20:50:23:654]: PROPERTY CHANGE: Adding System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61 property. Its value is 'C:\Windows\system32\'.
    Action start 20:50:23: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61.
    MSI (s) (24:48) [20:50:23:654]: Doing action: SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7
    Action ended 20:50:23: System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61. Return value 1.
    MSI (s) (24:48) [20:50:23:654]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7'
    MSI (s) (24:48) [20:50:23:654]: PROPERTY CHANGE: Adding SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 property. Its value is 'C:\Windows\SysWOW64\'.
    Action start 20:50:23: SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7.
    MSI (s) (24:48) [20:50:23:655]: Doing action: System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7
    Action ended 20:50:23: SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7. Return value 1.
    MSI (s) (24:48) [20:50:23:655]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7'
    MSI (s) (24:48) [20:50:23:655]: PROPERTY CHANGE: Adding System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 property. Its value is 'C:\Windows\system32\'.
    Action start 20:50:23: System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7.
    MSI (s) (24:48) [20:50:23:655]: Doing action: SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2
    Action ended 20:50:23: System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7. Return value 1.
    MSI (s) (24:48) [20:50:23:656]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2'
    MSI (s) (24:48) [20:50:23:656]: PROPERTY CHANGE: Adding SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2 property. Its value is 'C:\Windows\SysWOW64\'.
    Action start 20:50:23: SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2.
    MSI (s) (24:48) [20:50:23:656]: Doing action: System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2
    Action ended 20:50:23: SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2. Return value 1.
    MSI (s) (24:48) [20:50:23:656]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2'
    MSI (s) (24:48) [20:50:23:656]: PROPERTY CHANGE: Adding System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2 property. Its value is 'C:\Windows\system32\'.
    Action start 20:50:23: System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2.
    MSI (s) (24:48) [20:50:23:657]: Doing action: LaunchConditions
    Action ended 20:50:23: System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2. Return value 1.
    Action start 20:50:23: LaunchConditions.
    MSI (s) (24:48) [20:50:23:657]: Skipping action: CcmSwitchToRepairMode (condition is false)
    MSI (s) (24:48) [20:50:23:657]: Doing action: AppSearch
    Action ended 20:50:23: LaunchConditions. Return value 1.
    Action start 20:50:23: AppSearch.
    MSI (s) (24:48) [20:50:23:658]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:658]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:659]: PROPERTY CHANGE: Modifying CCMINSTALLDIR property. Its current value is 'h:\Program Files\SMS_CCM'. Its new value: 'C:\Windows\CCM\'.
    MSI (s) (24:48) [20:50:23:659]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:659]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\CCM\Embedded 3: 2
    MSI (s) (24:48) [20:50:23:659]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:659]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\Software\Microsoft\CCM\Logging\DebugLogging 3: 2
    MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:660]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\SMS\IIS 3: 2
    MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:660]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\SMS\MP 3: 2
    MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:660]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE32\SOFTWARE\Microsoft\SMS\MP 3: 2
    MSI (s) (24:48) [20:50:23:660]: Note: 1: 2262 2: Signature 3: -2147287038
    MSI (s) (24:48) [20:50:23:661]: Skipping action: CcmAbortIfEmbeddedExists (condition is false)
    MSI (s) (24:48) [20:50:23:661]: Doing action: CCPSearch
    Action ended 20:50:23: AppSearch. Return value 1.
    MSI (s) (24:48) [20:50:23:661]: Note: 1: 2205 2:  3: CCPSearch
    MSI (s) (24:48) [20:50:23:661]: Note: 1: 2228 2:  3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch`
    Action start 20:50:23: CCPSearch.
    MSI (s) (24:48) [20:50:23:661]: Doing action: RMCCPSearch
    Action ended 20:50:23: CCPSearch. Return value 0.
    MSI (s) (24:48) [20:50:23:662]: Note: 1: 2205 2:  3: CCPSearch
    MSI (s) (24:48) [20:50:23:662]: Note: 1: 2228 2:  3: CCPSearch 4: SELECT `Signature_` FROM `CCPSearch`
    Action start 20:50:23: RMCCPSearch.
    MSI (s) (24:48) [20:50:23:662]: Doing action: ValidateProductID
    Action ended 20:50:23: RMCCPSearch. Return value 0.
    Action start 20:50:23: ValidateProductID.
    MSI (s) (24:48) [20:50:23:662]: Skipping action: CcmSetInstallDir32 (condition is false)
    MSI (s) (24:48) [20:50:23:662]: Doing action: CcmSetInstallDir64
    Action ended 20:50:23: ValidateProductID. Return value 1.
    MSI (s) (24:48) [20:50:23:663]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CcmSetInstallDir64'
    MSI (s) (24:48) [20:50:23:663]: PROPERTY CHANGE: Adding TARGETDIR property. Its value is 'C:\Windows\CCM'.
    Action start 20:50:23: CcmSetInstallDir64.
    MSI (s) (24:48) [20:50:23:663]: Doing action: CcmSetInstallDirFromCmdLine
    Action ended 20:50:23: CcmSetInstallDir64. Return value 1.
    MSI (s) (24:48) [20:50:23:664]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CcmSetInstallDirFromCmdLine'
    MSI (s) (24:48) [20:50:23:664]: PROPERTY CHANGE: Modifying TARGETDIR property. Its current value is 'C:\Windows\CCM'. Its new value: 'C:\Windows\CCM\'.
    Action start 20:50:23: CcmSetInstallDirFromCmdLine.
    MSI (s) (24:48) [20:50:23:664]: Doing action: CcmSetPrimaryFolder
    Action ended 20:50:23: CcmSetInstallDirFromCmdLine. Return value 1.
    MSI (s) (24:48) [20:50:23:664]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'CcmSetPrimaryFolder'
    MSI (s) (24:48) [20:50:23:664]: PROPERTY CHANGE: Adding PRIMARYFOLDER property. Its value is 'TARGETDIR'.
    Action start 20:50:23: CcmSetPrimaryFolder.
    MSI (s) (24:48) [20:50:23:665]: Doing action: FindRelatedProducts
    Action ended 20:50:23: CcmSetPrimaryFolder. Return value 1.
    Action start 20:50:23: FindRelatedProducts.
    MSI (s) (24:48) [20:50:23:665]: PROPERTY CHANGE: Adding SMSSP1COLOCDOWNGRADE property. Its value is '{8864FB91-94EE-4F16-A144-0D82A232049D}'.
    MSI (s) (24:48) [20:50:23:666]: Skipping action: SmsDetectUnsupportedUpgrade (condition is false)
    MSI (s) (24:48) [20:50:23:666]: Skipping action: SmsDetectDowngrade (condition is false)
    MSI (s) (24:48) [20:50:23:666]: Skipping action: CcmDetectUnsupportedUpgrade (condition is false)
    MSI (s) (24:48) [20:50:23:666]: Doing action: SmsDetectColocationDowngrade
    Action ended 20:50:23: FindRelatedProducts. Return value 1.
    MSI (s) (24:48) [20:50:23:666]: Note: 1: 2235 2:  3: ExtendedType 4: SELECT `Action`,`Type`,`Source`,`Target`, NULL, `ExtendedType` FROM `CustomAction` WHERE `Action` = 'SmsDetectColocationDowngrade'
    Action start 20:50:23: SmsDetectColocationDowngrade.
    MSI (s) (24:48) [20:50:23:666]: Product: ConfigMgr Management Point -- A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
    A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
    Action ended 20:50:23: SmsDetectColocationDowngrade. Return value 3.
    Action ended 20:50:23: INSTALL. Return value 3.
    Property(S): UpgradeCode = {ABD0F60F-1622-4311-8989-106B60D784FF}
    Property(S): TARGETDIR = C:\Windows\CCM\
    Property(S): ALLUSERS = 1
    Property(S): ErrorDialog = ErrorDialog
    Property(S): ProductName = ConfigMgr Management Point
    Property(S): ProductCode = {6CED3AB0-05AF-4C81-8DBE-A62661C26F40}
    Property(S): PackageCode = {5CBAF9F8-A298-49C0-B874-D0F5F0F39DB4}
    Property(S): Manufacturer = Microsoft Corporation
    Property(S): ProductVersion = 5.00.7804.1000
    Property(S): ProductLanguage = 1033
    Property(S): SMSCWSREGKEYNAME = MPCWSPath
    Property(S): CcmCheckRepairNotInstalled_ActionText = Abort repair if the product has not been installed.
    Property(S): CcmSwitchToRepairMode_ActionText = Product has been installed. Switch to repair mode for this installation.
    Property(S): CcmSuppressReboot_ActionText = Suppress machine reboot after installation.
    Property(S): CcmCheckFreeDiskSpace_ActionText = Check if the target volumn has enough space for the installation.
    Property(S): CcmCheckFreeDiskSpace2_ActionText = Check if the target volumn has enough space for the installation.
    Property(S): CcmSetInstallDirFromCmdLine_ActionText = Property custom action for setting install directory from command line.
    Property(S): CcmCreateWmiNamespacesInit_ActionText = Processes the table CcmWmiNamespace and sends the context to CcmCreateWmiNamespaces.
    Property(S): CcmCreateWmiNamespaces_ActionText = Creates the WMI namespaces found in the CcmWmiNamespace table
    Property(S): CcmCreateWmiNamespacesRollback_ActionText = Calls CcmRemoveWmiNamespaces. Deletes the WMI namespaces.
    Property(S): CcmRemoveWmiNamespacesInit_ActionText = Processes the table CcmWmiNamespace and sends the context to CcmRemoveWmiNamespaces.
    Property(S): CcmRemoveWmiNamespaces_ActionText = Deletes WMI namespaces.
    Property(S): CcmRegisterWmiMofFilesInit_ActionText = Queues MOF files in the CcmWmiMofFile table to be compiled.
    Property(S): CcmRegisterWmiMofFile_ActionText = Compiles MOF files that were queued by CcmRegisterWmiMofFilesInit.
    Property(S): CcmWmiRollback_ActionText = Deletes the existin site policy config and then recompiles MOF to restore old WMI instances.
    Property(S): CcmDeleteWmiBackup_ActionText = Deletes the back up mof of the wmi namespace created for rolling back purposes.
    Property(S): CcmRemoveWmiObjectsInit_ActionText = Queries the CcmWmiObject table for WMI objects to be removed.
    Property(S): CcmRemoveWmiObjects_ActionText = Removes WMI objects found by CcmRemoveWmiObjectsInit.
    Property(S): CcmRemoveWmiObjectsRollback_ActionText = Calls CcmRemoveWmiObjects. Removes WMI objects found by CcmRemoveWmiObjectsInit.
    Property(S): CcmCreateIISVirtualDirectoriesInit_ActionText = Processes the CcmIISVirtualDirectory table and passes that information to CcmCreateIISVirtualDirectories to create the virtual directories.
    Property(S): CcmCreateIISVirtualDirectories_ActionText = Creates the virtual directories specified in the CcmIISVirtualDirectory table.
    Property(S): CcmRollbackIISVirtualDirectories_ActionText = Calls CcmRemoveIISVirtualDirectories. Removes IIS Virtual Directories found in CcmRemoveIISVirtualDirectoriesInit.
    Property(S): CcmRemoveIISVirtualDirectories_ActionText = Removes IIS Virtual Directories found in CcmRemoveIISVirtualDirectoriesInit.
    Property(S): CcmRemoveIISVirtualDirectoriesInit_ActionText = Queries the CcmIISVirtualDirectory table for IIS Virtual Directories to be removed.
    Property(S): CcmCreateIISApplicationPoolsInit_ActionText = Processes the CcmIISAplicationPool table and passes that context to CcmCreateIISAplicationPools custom action.
    Property(S): CcmCreateIISApplicationPools_ActionText = Creates the application pools specified in the CcmIISAplicationPools table.
    Property(S): CcmCreateIISApplicationPoolsRollback_ActionText = Calls CcmRemoveIISApplicationPools. Removes IIS Application Pools found in CcmRemoveIISApplicationPoolsInit.
    Property(S): CcmRemoveIISApplicationPoolsInit_ActionText = Queries the CcmIISApplicationPool table for IIS Application Pools to be removed.
    Property(S): CcmRemoveIISApplicationPools_ActionText = Removes IIS Application Pools found in CcmRemoveIISApplicationPoolsInit.
    Property(S): CcmDetectFilesInUseRemoveInit_ActionText = Detect if files are in used at uninstallation.
    Property(S): CcmDetectFilesInUseInit_ActionText = Detects file in use.
    Property(S): CcmDetectFilesInUse_ActionText = Moves files that are in use so that they will be deleted upon the next reboot.
    Property(S): CcmDetectFilesInUseRollback_ActionText = Rolls back files moved by CcmDetectFilesInUse.
    Property(S): CcmDetectFilesInUseCommit_ActionText = Commits action of CcmDetectFileInUse. After this we cannot rollback.
    Property(S): CcmDetectFilesInUseRemoveRollback_ActionText = Calls CcmDetectFilesInUseRollback. Rolls back the files moved by CcmDetectFilesInUse.
    Property(S): CcmDetectFilesInUseRemoveCommit_ActionText = Calls CcmDetectFilesInUseCommit. Commits action of CcmDetectFileInUse. After this the action cannot be rolled back.
    Property(S): CcmLookupAccountNames_ActionText = Looks up the name of the Administrators group, Users group, and Creator Owner account, then sets the properties CcmAdministratorGroupName, CcmUsersGroupName, and CcmCreatorOwnerAccountName.
    Property(S): CcmRegisterPerfCountersInit_ActionText = Processes the CcmPerfApplication table for components that will be registering a performance counter.
    Property(S): CcmRegisterPerfCounters_ActionText = Registers performance counters gathered in the CcmRegisterPerfCountersInit action
    Property(S): CcmUnregisterPerfCountersInit_ActionText = Processes the CcmPerfApplication table for components that will be unregistering a performance counter.
    Property(S): CcmUnregisterPerfCounters_ActionText = Removes performance counters gathered in the CcmUnregisterPerfCountersInit action
    Property(S): CcmRegisterPerfCountersRollback_ActionText = Rolls back any changes made by CcmRegisterPerfCounters if install fails.
    Property(S): CcmUnloadWmiProvidersInit_ActionText = Enumerates component table and builds a list of files that will be installed
    Property(S): CcmUnloadWmiProviders_ActionText = Enumerates all providers and unloads them, verifies they are unloaded, and then reloads them.
    Property(S): CcmTypelibRollbackInit_ActionText = Queues a list of type libraries to be registered on rollback.
    Property(S): CcmTypelibRollback_ActionText = In the event of install failing, this event rolls back the type libraries to the state before install started.
    Property(S): CcmSetObjectSecurityInit_ActionText = Queries the CcmObjectSecurity table and passes this information to CcmSetObjectSecurity.
    Property(S): CcmSetObjectSecurity_ActionText = Applying security permissions
    Property(S): CcmSetInstallDir32_ActionText = Property action for setting installation directory for Configuration Manager Client on 32-bit platform.
    Property(S): CcmSetInstallDir64_ActionText = Property action for setting installation directory for Configuration Manager Client on 64-bit platform.
    Property(S): CcmSetPrimaryFolder_ActionText = Property action for setting target installation folder.
    Property(S): PRIMARYFOLDER = TARGETDIR
    Property(S): VersionNT64 = 603
    Property(S): CCMINSTALLDIR = C:\Windows\CCM\
    Property(S): System64Folder.12C909B6_5F69_4C4D_8EC3_C225C1607933 = C:\Windows\system32\
    Property(S): SystemFolder.12C909B6_5F69_4C4D_8EC3_C225C1607933 = C:\Windows\SysWOW64\
    Property(S): CCMEXECFILEKEY = [#CcmExec_exe.A6940213_CD40_4753_8BA2_E803376DECC3]
    Property(S): CcmDetectUpgradeOldClient_Message = A previous version of the Configuration Manager Client is installed. Please upgrade the client to Configuration Manager 2012 before attempting to upgrade.
    Property(S): SmsDetectUpgradeOldMP_Message = A previous version of the Configuration Manager Management Point is installed. Please upgrade the management point to Configuration Manager 2012 before attempting to upgrade.
    Property(S): SmsDetectUnsupportedUpgrade_ActionText = Detect if a previous version of the Configuration Manager Management Point is installed before upgrading Configuration Manager Client.
    Property(S): CcmDetectUnsupportedUpgrade_ActionText = Detect if a previous version of the Configuration Manager Client is installed before upgrading Configuration Manager Management Point.
    Property(S): CcmAbortIfEmbeddedExists_ActionText = Abort installation if the Configuration Manager Client Embedded version is installed.
    Property(S): CcmRegisterHostingConfigurationInit_ActionText = Gathers configuration for Configuration Manager Client service to be registered on the system.
    Property(S): CcmRegisterHostingConfiguration_ActionText = Register configuration for Configuration Manager Client service.
    Property(S): CcmRegisterHostedApplicationsInit_ActionText = Gathers hosted out-of-proc DCOM applications running inside of Configuration Manager Client to be registered on the system.
    Property(S): CcmRegisterHostedApplications_ActionText = Register hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
    Property(S): CcmRegisterHostedApplicationsRollback_ActionText = Rollback the registration of hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
    Property(S): CcmRemoveHostedApplicationsInit_ActionText = Prepare to remove the registration of hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
    Property(S): CcmRemoveHostedApplications_ActionText = Remove the registration of hosted out-of-proc DCOM applications running inside of Configuration Manager Client.
    Property(S): CcmRegisterEndpointsInit_ActionText = Gathers information such as log file name on each endpoint to be registered on the system.
    Property(S): CcmRegisterEndpoint_ActionText = Registers endpoint gathered in the action CcmRegisterEndpointsInit with WMI.
    Property(S): CcmRegisterEndpointRollback_ActionText = In the event of a failed installation, this action rolls back the changes from CcmRegisterEndpoint.
    Property(S): CcmRemoveEndpointsInit_ActionText = Gathers information for each endpoint to be removed from the system.
    Property(S): CcmRemoveEndpoint_ActionText = Removes endpoint gathered in the action CcmRemoveEndpointsInit with WMI.
    Property(S): CcmRegisterSystemTasksInit_ActionText = Processes the CcmSystemTask table and passes this information to CcmRegisterSystemTask.
    Property(S): CcmRegisterSystemTask_ActionText = Registers a System Task with WMI.
    Property(S): CcmRegisterSystemTaskRollback_ActionText = Rolls back the changes made by CcmRegisterSystemTask.
    Property(S): CcmRemoveSystemTasksInit_ActionText = Processes the CcmSystemTask table and passes this information to CcmRemoveSystemTask.
    Property(S): CcmRemoveSystemTask_ActionText = Deletes a System Task from WMI.
    Property(S): CcmRegisterProduct_ActionText = If product is registered in MSI database, then product is registered with WMI.
    Property(S): CcmRegisterProductRollback_ActionText = Calls CcmUnregisterProduct. Deletes the instance from the WMI in the Configuration Manager namespace using the ProductCode instance in the session.
    Property(S): CcmUnregisterProduct_ActionText = Deletes the instance from WMI in ccm namespace using the ProductCode instance in the session.
    Property(S): CcmRegisterComponentsInit_ActionText = Generates the list of components for CcmRegisterComponets action to register.
    Property(S): CcmRegisterComponents_ActionText = Registers components passed in from CcmRegisterComponentsInit
    Property(S): CcmRegisterComponentsRollback_ActionText = In the event of a failed installation, this action rolls back the changes from CcmRegisterComponents.
    Property(S): CcmUnregisterComponentsInit_ActionText = Generates the list of components for CcmUnregisterComponets action to unregister.
    Property(S): CcmUnregisterComponents_ActionText = Unregisters components passed in from the action CcmUnregisterComponentsInit.
    Property(S): CcmSetupLoggingInit_ActionText = Gathers log file information from the LogFile table and passes this information to CcmSetupLogging.
    Property(S): CcmSetupLogging_ActionText = Sets component logging information in WMI.
    Property(S): CcmStopService_ActionText = Stops the ccmexec service.
    Property(S): CcmStopServiceRollback_ActionText = Calls CcmStartService. Starts the ccmexec service.
    Property(S): CcmStartService_ActionText = Starts the ccmexec service.
    Property(S): CcmClearServiceSetupStamp_ActionText = Clear the time stamp for blocking the ccmexec service from starting up during upgrade.
    Property(S): CcmSetServiceConfigInit_ActionText = Gathers ServiceData and then queues actions CcmSetServiceConfig and CcmMigrateMessagingQueues.
    Property(S): CcmSetServiceConfig_ActionText = Sets WMI ServiceRootDir and configures CCMEXEC service.
    Property(S): CcmConfigDCOMInit_ActionText = Processes the CcmDCOMAplication table and  checks to see if the DCOM Component is being updated. If so, passes that information to custom action CcmConfigDCOM.
    Property(S): CcmConfigDCOM_ActionText = Configures registry key permissions for the DCOM Components passed from CcmConfigDCOMInit.
    Property(S): CcmFixupServiceConfigInit_ActionText = Gathers the services or load ordering groups which must be started before ccmexec starts.
    Property(S): CcmFixupServiceConfig_ActionText = Sets the services or load ordering groups which must be started before ccmexec can be started.
    Property(S): CcmRemoveService_ActionText = Removes BITS jobs and deletes the messaging queues.
    Property(S): CcmRemoveLanternDocuments_ActionText = Removing documents from Microsoft Policy Platform that have been submitted by Configuration Manager authority.
    Property(S): CcmSetPortConfigInit_ActionText = This custom action specifies the port the client should use when communicating with the management point and the server locator point.
    Property(S): CcmSetHttpsConfigInit_ActionText = This custom action configures the https port and http state.
    Property(S): CcmPreserveLastStateSerialNum_ActionText = Custom action to preserve last state message serial number.
    Property(S): CcmInitializePolicyInit_ActionText = Gather default policy information.
    Property(S): CcmInitializePolicy_ActionText = Sets and initializes default policy.
    Property(S): CcmMigratePolicySettingsInit_ActionText = Custom action to schedule the deferred execution of CcmMigratePolicySettings custom action.
    Property(S): CcmMigratePolicySettings_ActionText = Compiles Mof file to migrate root\ccm\Policy namespace schema from Pre-V4 Beta2 to V4 and above.
    Property(S): CcmMigratePolicySettingsCommit_ActionText = Just deletes the temporary MOF file.
    Property(S): CcmMigratePolicySettingsRollback_ActionText = Just deletes the temporary MOF file. Actual Rollback is done by the rollback action that rollbacks root\ccm namespace.
    Property(S): ExpandCcmExecFileKey_ActionText = Property action for setting CcmExec file key.
    Property(S): CcmMinAppVersion = 5.00.7000.0000
    Property(S): CcmMaxAppVersion = 5.00.9000.0000
    Property(S): SystemFolder.A6940213_CD40_4753_8BA2_E803376DECC3 = C:\Windows\SysWOW64\
    Property(S): System64Folder.A6940213_CD40_4753_8BA2_E803376DECC3 = C:\Windows\system32\
    Property(S): SystemFolder.F65FD590_5BEA_48BE_8408_26F7244E8B61 = C:\Windows\SysWOW64\
    Property(S): System64Folder.F65FD590_5BEA_48BE_8408_26F7244E8B61 = C:\Windows\system32\
    Property(S): USELEGACYSTATEMESSAGESTORE = 1
    Property(S): CcmValidateCustomWebSite_ActionText = This custom action validates that either the custom website or default website (if a custom website is not specified) can be used.
    Property(S): CcmValidateServerConfig_ActionText = Validates that IIS, BITS and WebDAV is installed and properly configured setup.
    Property(S): CcmLookupIISAnonymousAccountName_ActionText = Looks up the IIS AnonymousUserName and then sets the IISAnonymousUserAccount property to this value.
    Property(S): CcmSetServiceMPConfigInit_ActionText = Gathers Incoming and Outgoing directories and virtual directories for the MP. Queues the action CcmSetServiceMPConfig.
    Property(S): CcmSetServiceMPConfig_ActionText = Sets Incoming and Outgoing directories and virtual directories in WMI.
    Property(S): CcmSetServerDataRoot_ActionText = Property action for setting service data root folder.
    Property(S): CcmSetServerDataRootInstallDir_ActionText = Property action for setting service data folder.
    Property(S): CcmIncomingVDirName = CCM_Incoming
    Property(S): SystemFolder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = C:\Windows\SysWOW64\
    Property(S): System64Folder.BFC13682_FB8F_4455_9724_4DDBBBF713D7 = C:\Windows\system32\
    Property(S): CCMSERVERDATAROOT = h:\Program Files\Microsoft Configuration Manager
    Property(S): CcmSystemVDirName = CCM_System
    Property(S): CcmSystemRegVDirName = CCM_System_WindowsAuth
    Property(S): CcmSystemAltAuthVDirName = CCM_System_AltAuth
    Property(S): SMSCACHEDIR = Default
    Property(S): SMSCACHEFLAGS = Default
    Property(S): DISABLESITEOPT = Default
    Property(S): DISABLECACHEOPT = Default
    Property(S): SMSCACHESIZE = 5120
    Property(S): SmsShellNotify_ActionText = Notifies the shell for the file-association icon changes.
    Property(S): CCMINSTALLMSMQ = FALSE
    Property(S): CCMINSTALLMP = 1
    Property(S): ARPSYSTEMCOMPONENT = 1
    Property(S): ARPNOREMOVE = 1
    Property(S): ARPNOMODIFY = 1
    Property(S): CCMENABLELOGGING_Default = FALSE
    Property(S): CCMLOGLEVEL_Default = 1
    Property(S): CCMLOGMAXSIZE_Default = 2000000
    Property(S): CCMLOGMAXHISTORY_Default = 1
    Property(S): SecureCustomProperties = CCMENABLELOGGING;CCMLOGLEVEL;CCMLOGMAXHISTORY;CCMLOGMAXSIZE;CCMDEBUGLOGGING;CCMOSINSTALLPATHS;CCMINSTALLMSMQ;CCMINSTALLMP;SMSUPGRADEPRODUCTS;CCMSERVERDATAROOT;SMSUPLEVELPRODUCTS;USESMSPORTS;SMSPORTS;CCMHTTPPORT;SMSSP1COLOCDOWNGRADE;USESMSSSLPORTS;SMSSSLPORTS;SMSSSLSTATE;CCMHTTPSPORT;CCMHTTPSCERTNAME;SMSFWKUPGRADEFROMPREV4;CCMFWKUPGRADEFROMPREV4;CLIENTFWKUPGRADEFROMCM2007;SMSCWS;CCMSHAREMODE
    Property(S): AdminProperties = CCMENABLELOGGING;CCMLOGLEVEL;CCMLOGMAXHISTORY;CCMLOGMAXSIZE;CCMDEBUGLOGGING;CCMOSINSTALLPATHS;CCMINSTALLMSMQ;CCMINSTALLMP;CCMSERVERDATAROOT;CCMALLOWSILENTREBOOT;CCMHTTPPORT;CCMHTTPSPORT;CCMHTTPSCERTNAME;SMSCWS
    Property(S): CcmDefaultPolicyAuthorityPriority = 10
    Property(S): SmsDetectColocationDowngrade_Message = A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
    Property(S): SmsDetectColocationDowngrade_ActionText = Detect if a newer version of the Configuration Management Client is installed before installing the Configuration Manager Management Point.
    Property(S): SmsDetectDowngrade_ActionText = Check if a newer version of the Configuration Manager Client is already installed.
    Property(S): SmsMpRepairSucceeded_ActionText = Sends a wmi event to indicate MP repair succeeded.
    Property(S): SmsDetectMSXMLRebootRequired_ActionText = Tries to create an instance of SAXXMLReader to determine if a reboot is required.
    Property(S): SmsMpSetDefaultPolicyAuthority_ActionText = Set default policy authority for the Configuration Manager Management Point.
    Property(S): SmsMpSerializedKeyExist_ActionText = Wait for the Configuration Manager Management Point serialized key to exist.
    Property(S): ButtonText_Next = &Next >
    Property(S): ButtonText_Back = < &Back
    Property(S): ButtonText_Cancel = &Cancel
    Property(S): ButtonText_Finish = &Finish
    Property(S): ButtonText_Install = &Install
    Property(S): ButtonText_Close = &Close
    Property(S): ButtonText_OK = &OK
    Property(S): ButtonText_Abort = &Abort
    Property(S): ButtonText_Ignore = &Ignore
    Property(S): ButtonText_No = &No
    Property(S): ButtonText_Yes = &Yes
    Property(S): ButtonText_Retry = &Retry
    Property(S): ButtonText_Exit = &Exit
    Property(S): FilesInUse_Info = Setup has detected that it needs to update some files that are currently in use by other processes.
    To prevent having to reboot the machine, please close the following applications:
    Property(S): DefaultUIFont = DefaultDlgFont
    Property(S): DialogBox_Title = ConfigMgr Management Point Setup
    Property(S): WelcomeDialog_Info = This will install the ConfigMgr Management Point.
    Property(S): InstallDialog_Title = Install
    Property(S): InstallDialog_SubTitle = The product is now ready to install
    Property(S): InstallDialog_Info = Click Next to proceed.
    Property(S): ProgressDialog_Title = Please Wait
    Property(S): ProgressDialog_SubTitle = Setup is configuring your system.
    Property(S): CompleteDialog_Title = Setup Complete
    Property(S): CompleteDialog_SubTitle = Setup has finished updating your system.
    Property(S): CompleteDialog_Info = Setup was successful.
    Property(S): UserExitDialog_Title = Setup Aborted
    Property(S): UserExitDialog_SubTitle = Setup was cancelled
    Property(S): UserExitDialog_Info = The ConfigMgr Management Point setup was cancelled.
    Property(S): InstallErrorDialog_Title = Setup Aborted
    Property(S): InstallErrorDialog_SubTitle = Setup failed
    Property(S): InstallErrorDialog_Info = Setup encountered an error and could not continue.
    Property(S): SystemFolder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\Windows\SysWOW64\
    Property(S): System64Folder.1114972D_590D_4AB6_BA2E_779928CEDCC2 = C:\Windows\system32\
    Property(S): SMSSP1COLOCDOWNGRADE = {8864FB91-94EE-4F16-A144-0D82A232049D}
    Property(S): MsiLogFileLocation = h:\Program Files\Microsoft Configuration Manager\logs\mpMSI.log
    Property(S): ProductState = -1
    Property(S): PackagecodeChanging = 1
    Property(S): USESMSPORTS = TRUE
    Property(S): SMSPORTS = 80
    Property(S): USESMSSSLPORTS = TRUE
    Property(S): SMSSSLPORTS = 443
    Property(S): USESMSSSL = TRUE
    Property(S): SMSSSLSTATE = 0
    Property(S): CCMENABLELOGGING = TRUE
    Property(S): CCMLOGLEVEL = 1
    Property(S): CCMLOGMAXSIZE = 1000000
    Property(S): CCMLOGMAXHISTORY = 1
    Property(S): CURRENTDIRECTORY = H:\Program Files\Microsoft Configuration Manager\bin\x64
    Property(S): CLIENTUILEVEL = 3
    Property(S): MSICLIENTUSESEXTERNALUI = 1
    Property(S): CLIENTPROCESSID = 6556
    Property(S): MsiRestartManagerSessionKey = d8d0cefc1249514889002637bb750a41
    Property(S): VersionDatabase = 200
    Property(S): MsiSystemRebootPending = 1
    Property(S): VersionMsi = 5.00
    Property(S): VersionNT = 603
    Property(S): WindowsBuild = 9600
    Property(S): ServicePackLevel = 0
    Property(S): ServicePackLevelMinor = 0
    Property(S): MsiNTProductType = 3
    Property(S): MsiNTSuiteDataCenter = 1
    Property(S): WindowsFolder = C:\Windows\
    Property(S): WindowsVolume = C:\
    Property(S): System64Folder = C:\Windows\system32\
    Property(S): SystemFolder = C:\Windows\SysWOW64\
    Property(S): RemoteAdminTS = 1
    Property(S): TempFolder = C:\Windows\TEMP\
    Property(S): ProgramFilesFolder = C:\Program Files (x86)\
    Property(S): CommonFilesFolder = C:\Program Files (x86)\Common Files\
    Property(S): ProgramFiles64Folder = C:\Program Files\
    Property(S): CommonFiles64Folder = C:\Program Files\Common Files\
    Property(S): AppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\
    Property(S): FavoritesFolder = C:\Windows\system32\config\systemprofile\Favorites\
    Property(S): NetHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Network Shortcuts\
    Property(S): PersonalFolder = C:\Windows\system32\config\systemprofile\Documents\
    Property(S): PrintHoodFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Printer Shortcuts\
    Property(S): RecentFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\Recent\
    Property(S): SendToFolder = C:\Windows\system32\config\systemprofile\AppData\Roaming\Microsoft\Windows\SendTo\
    Property(S): TemplateFolder = C:\ProgramData\Microsoft\Windows\Templates\
    Property(S): CommonAppDataFolder = C:\ProgramData\
    Property(S): LocalAppDataFolder = C:\Windows\system32\config\systemprofile\AppData\Local\
    Property(S): MyPicturesFolder = C:\Windows\system32\config\systemprofile\Pictures\
    Property(S): AdminToolsFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Administrative Tools\
    Property(S): StartupFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Startup\
    Property(S): ProgramMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
    Property(S): StartMenuFolder = C:\ProgramData\Microsoft\Windows\Start Menu\
    Property(S): DesktopFolder = C:\Users\Public\Desktop\
    Property(S): FontsFolder = C:\Windows\Fonts\
    Property(S): GPTSupport = 1
    Property(S): OLEAdvtSupport = 1
    Property(S): ShellAdvtSupport = 1
    Property(S): MsiAMD64 = 6
    Property(S): Msix64 = 6
    Property(S): Intel = 6
    Property(S): PhysicalMemory = 5372
    Property(S): VirtualMemory = 4017
    Property(S): AdminUser = 1
    Property(S): MsiTrueAdminUser = 1
    Property(S): LogonUser = SYSTEM
    Property(S): UserSID = S-1-5-18
    Property(S): UserLanguageID = 1033
    Property(S): ComputerName = [servername]
    Property(S): SystemLanguageID = 1033
    Property(S): ScreenX = 1024
    Property(S): ScreenY = 768
    Property(S): CaptionHeight = 23
    Property(S): BorderTop = 1
    Property(S): BorderSide = 1
    Property(S): TextHeight = 16
    Property(S): TextInternalLeading = 3
    Property(S): ColorBits = 32
    Property(S): TTCSupport = 1
    Property(S): Time = 20:50:23
    Property(S): Date = 8/27/2014
    Property(S): MsiNetAssemblySupport = 4.0.30319.33440
    Property(S): MsiWin32AssemblySupport = 6.3.9600.16384
    Property(S): RedirectedDllSupport = 2
    Property(S): MsiRunningElevated = 1
    Property(S): Privileged = 1
    Property(S): DATABASE = C:\Windows\Installer\6257f6f.msi
    Property(S): OriginalDatabase = h:\Program Files\Microsoft Configuration Manager\bin\x64\mp.msi
    Property(S): UILevel = 2
    Property(S): ACTION = INSTALL
    === Logging stopped: 8/27/2014  20:50:23 ===
    MSI (s) (24:48) [20:50:23:717]: Note: 1: 1708
    MSI (s) (24:48) [20:50:23:717]: Product: ConfigMgr Management Point -- Installation operation failed.
    MSI (s) (24:48) [20:50:23:718]: Windows Installer installed the product. Product Name: ConfigMgr Management Point. Product Version: 5.00.7804.1000. Product Language: 1033. Manufacturer: Microsoft Corporation. Installation success or error status: 1603.
    MSI (s) (24:48) [20:50:23:721]: Deferring clean up of packages/files, if any exist
    MSI (s) (24:48) [20:50:23:721]: MainEngineThread is returning 1603
    MSI (s) (24:FC) [20:50:23:725]: RESTART MANAGER: Session closed.
    MSI (s) (24:FC) [20:50:23:725]: No System Restore sequence number for this installation.
    MSI (s) (24:FC) [20:50:23:726]: User policy value 'DisableRollback' is 0
    MSI (s) (24:FC) [20:50:23:726]: Machine policy value 'DisableRollback' is 0
    MSI (s) (24:FC) [20:50:23:726]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (24:FC) [20:50:23:726]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (24:FC) [20:50:23:726]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (24:FC) [20:50:23:727]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (9C:58) [20:50:23:728]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (9C:58) [20:50:23:728]: MainEngineThread is returning 1603
    === Verbose logging stopped: 8/27/2014  20:50:23 ===

    A newer version of the Configuration Manager Client is installed. Cannot continue installing this version of the management point.
    Action ended 20:50:23: SmsDetectColocationDowngrade. Return value 3.
    Action ended 20:50:23: INSTALL. Return value 3.
    The installer certainly thinks that you still have a previous ConfigMgr client installed. Perhaps you haven't completely removed it. Use ccmclean.exe from the SMS 2003 tool kit.
    If that fails, why not just rebuild the server - you've said that this is a fresh install. I don't like too much messing at the beginning. This can be difficult enough - you need to start with a clean installation of the product.
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • ProClarity 6.3 PAS install fails on Windows Server 2012

    We are trying to install PAS 6.3 on Windows Server 2012 and the install fails with the following error
    The following requirements are missing:
    Windows Server 2003 SP1
    We have successfully installed on Windows Server 2008 R2, so it really isn't a Windows Server 2003 SP1 issue.
    Has anyone successfully installed on Windows Server 2012?  Is there a way to force the installer not to check for the OS?
    Thanks.
    Kevin

    I have a PAS server running in Windows 2012, by doing exactly the same pre-requisites  that you do in Windows 2008 r2 (iis, Framework, SQL ADO 2005 / 2008). With the Windows Server 2003 SP1 message you can avoid it by doing a really simple thing that
    is right click the setup file --> properties, and head to the "Compatibility Tab" and run it with compatibility mode Windows 7, also run it with Admin permissions. This let you pass by the message and let you install the product.  Remember, after  the
    installation, you need to check all the IIS config, folder permissions, that you did in Windows 2008 x64  installation. Also, the App pool needs to work with .NET 2.0 not 4.0. 
    Good luck! 
    Byron
    BNavas

  • G5 10.5.8 Combo Update codec overrun - install fails

    Hi,
    I still have my first mac, a Power Mac G5, but it has been acting as a center speaker stand for some time now. A couple of years ago it started playing up, I spent hours and pounds trying to fix it, gave up and bought a shiny new iMac. So with the festive season upon us and orders to tidy up, I thought I'd have one last try at fixing it before turning it into a drinks cabinet.
    As I recall, it all started to go wrong one day when I tried to download a large update to something. When I tried to install the update I got a Codec Overrun error and/or a Corrupt File message. As it stands today the machine is running a clean install of OSX 10.5.6 and I am failing to install the MacOSXUpdCombo10.5.8.dmg upgrade. I currently have 2 copies of the update.
    One copy on the desktop  was downloaded directly from the Apple support site. The .dmg opens and verifies OK and I can launch the MacOSXUpdCombo10.5.8.pkg. This runs through the installation sequence, past the password but finally comes up with an error message "Install Failed. The installer could not validate the contents of the 'MacOSXUpdCombo10.5.8' package. Contact the software manufacturer for assistance."
    Another copy in my downloads folder, put there by the Software Updater, doesn't get that far. It comes up with "Warning,The following disk image failed to mount. Image - MacOSXUpdCombo10.5.8.dmg, Reason - codec overrun."
    So far I have tried:-
    Memory - run third party memory checker application (can't remember which one) and found no faults.Tried different set of memory cards
    Hard disk - run all the disk check and repair utilities, re-formatted, repartitioned. Tried a different hard disk.
    OSX 10.5.6 - reinstalled from original disks several times.
    MacOSXUpdCombo10.5.8 - downloaded via Software Updater process and direct from Apple Support website. Downloaded via wi-fi, ethernet, different Mac, different PC. Always get the exact same file size.
    Resetting the PRAM etc
    New standby battery
    Installing in Safe Mode
    Swearing.
    None of this has worked. I get some different error messages but they are all variations of "codec overrun", "corrupt file" or "Install failure"
    Anyone got any other ideas? Or should I just get on with the drinks cabinet conversion?
    Thanks

    That message isn't a space available message. If you bring up Disk Utility, how does it say the partition is formatted, ie, partition format, write status, and partition map scheme? Assume SMART status is verified, yes?

  • Family Pack Leopard install fails G4 Dual 1.2Ghz

    All, I purchased the Leopard family pack and have successfully installed it on an Intel Macbook Pro and a G5 2.3Ghz DP machine - flawless, no problems during installation or after.
    However, any attempt to install on a G4 Dual 1.2Ghz + 2Gb of RAM + just bought a Seagate 500Gb Barracuda internal drive (well within the designated technical requirements), I've tried the following.
    1. Booting the G4 off the Leopard install DVD, I get the following error: Failed Install message = "The Installer could not validate the contents of the Essentials Package...".
    I can never get beyond this point. After receiving this error, the internal disk isn't even recognized on the bus - I have to pull the disk out, put it in an external case to reformat it. I've even tried a low level format and also had Seagate replace the disk thinking it was defective.
    2. I then thought it may be an issue with putting the Seagate disk in cable select mode versus master / slave configuration. The Seagate is the only hard drive in the machine. I have tried both cable select and master/slave configuration - both freeze after install, etc. without fail.
    3. Tried installing Leopard on the G4 by connecting it to the G5 in target disk mode. It installed, but routinely just freezes (NEVER had this issue with Tiger on this machine).
    I do see lots of people posting issues with the "The Installer could not validate the contents of the Essentials Package..." error.
    For the record, after successful Leopard install using technique #1 and #3 - I am also unable to run the Migration assistant - it fails every time with a kernel panic. I'm not having any trouble with the Leopard install media on any of the other 2 machines, nor did I have issues running the migration assistant.
    Any ideas are appreciated. thx,

    themdg - you said you put back your 2-512 original RAM cards and tried to install Leopard and the install failed. But my original, factory-installed RAM was third-party RAM which prevented me from installing Leopard, giving the “essentials” error. Only when I purchased RAM from Apple, and used only that RAM to install, could I get it to work correctly.
    Check your original RAM. If it is not the Apple brand, it may not work because of that, even if it was the factory-installed RAM.
    After I installed Leopard with only the Apple RAM, I added back the third-party RAM and I’ve been running Leopard flawlessly since.
    It seems the installation software, which meticulously checks the installer disk for flaws, should also check the RAM to see if the installation will be successful (i.e., check to see if it is going to produce the “essentials” error) and also check to see if you have enough valid RAM to install, before it begins installation, and to let the user know there will be a problem unless the RAM is changed to valid cards.
    I “assumed” I had enough valid RAM when I first tried to install Leopard because I had a G5, but it had only 256 MB of non-Apple brand RAM (minimum of 512 is required). A direct check of that by the installer and letting me know it was a problem would have saved me a lot of trouble checking lots of other potential problems, like a bad installer disk, a third-party drive, etc., before I figured out it was insufficient and incompatible RAM for the installation.
    I read the minimal requirements for installation of Leopard and probably someone will say I should have checked all those before I tried the installation, but I didn’t, as I’m sure many others have not, because we “assume” Apple had tested it and would prevent us from making any mistake like this.
    Previously Apple made their software and hardware to “just work” by providing error messages before we made an error and we have come to rely on that. But they overlooked this problem on this update. It’s the first time I’ve had a problem with an update from Apple.
    I’m still a loyal Apple user, but I’ll check requirements a little closer with future updates.

  • SCOM agent install fails Error 80070035 - the network path was not found

    I have deployed SCOM 2012 agents to most servers (2008, 2008 R2, 2012, 2012R2) in our estate but some either fail to install or are not monitored. I assume the two problems are related, but for now I am concentrating on the servers that fail completely.
    Installation is from the Discovery Wizard and I have about 20 servers that fail of various server versions.
    So looking at one specific server that is failing to install the agent - a 2008 standard service pack 2
    The firewall in on and file and printer sharing is enabled for domain, remote administration is enabled for domain
    I added a specific rule to allow TCP 5723 and 5724
    DCOM is enabled
    I can Ping the target server from the SCOM server by both name and FQDN - both return the same IP and our DNS server has only one entry for this server
    I can browse to the admin share \\server\C$ from the SCOM Server, using the same account that I specify for the agent install that is a domain admin with rights on this server (and on the other servers the agent
    did install to) and the server has plenty of disk space available
    I am not sure what else to look at so would welcome any ideas
    Thanks

    Hi Petro,
    I have a Agent installation failure cheat sheet, For your error 80070035 it is said to perform a manual installation.
    So i would like to understand which version of SCOM is this ? 2007 R2 or 2012 or 2012 r2 ?
    Also check if your agents have the WMI service started and enabled ?
    Also if yours is a SCOM 2007 R2 do you have a RMS & MS in your management group ? If yes then Pushing the agent installation from MS may cause such issue. So would suggest you push the installation from RMS.
    Also check if your Network connectivity meets the minimum requirement as recommended by SCOM. Below is applicable for Both SCOM 2007 R2 & SCOM 2012 & 2012 R2.
    Component A
    Component B
    Minimum Requirement
    Root management server or management server
    Agent
    64 Kbps
    Root management server or management server
    Agentless
    1024 Kbps
    Root management server or management server
    Database
    256 Kbps
    Also check if you have any Anti virus / Firewall which is blocking the install / communication. If yes disabe or add the "Monitoringhost.exe to the safe list or what your feature is.
    Check if you have another IP assigned to the NIC card and remove it tempraurly andchecl.
    Also post the event logs of the Agents which are in not monitored state for analysis.
    SCOM Agent installation failure error codes
    Error
    Error Code(s)
    Remediation Steps
    The MOM Server could not execute WMI Query "Select * from Win32_Environment where
    NAME='PROCESSOR_ARCHITECTURE'" on computer server.domain.com
    Operation: Agent Install
    Install account: domain\account
    Error Code: 80004005
    Error Description: Unspecified error
    80004005
    1.  Check the PATH environment variable.  If the PATH statement is very long, due to lots of installed third party software - this can
    fail.  Reduce the path by converting any long filename destinations to 8.3, and remove any path statements that are not necessary.
    2.  The cause
    could be corrupted Performance Counters on the target Agent.
    To rebuild all Performance counters including extensible and third party counters in Windows Server 2003, type the following commands at a command
    prompt. Press ENTER after each command.
    cd
    \windows\system32
    lodctr /R
    Note /R is uppercase.
    Windows Server 2003 rebuilds all the counters because it reads all the .ini files in the C:\Windows\inf\009 folder for the English operating system.
    How to manually rebuild Performance Counter Library values
    http://support.microsoft.com/kb/300956
    3.  Manual agent install. 
    The MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
    computer “servername.domain.com”
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: 800706BA
    Error Description: The RPC server is unavailable.
    8004100A
    800706BA
    1.  Ensure agent push account has local admin rights
    2.  Firewall is blocking NetBIOS access
    3.  Inspect WMI health and rebuild repository if necessary
    4.  Firewall is blocking ICMP  (Live OneCare)
    5.  DNS incorrect
    The MOM Server failed to open service control manager on computer "servername.domain.com". Access is Denied
    Operation: Agent Install
    Install account: DomainName\User Account
    Error Code: 80070005
    Error Description: Access is denied.
    80070005
    80041002
    1.  Verify SCOM agent push account is in Local Administrators group on target computer.
    2.  On Domain controllers will have to work with AD team to install agent manually if agent push account is not a domain admin.
    Disable McAfee antivirus during push
    The MOM Server failed to open service control manager on computer "servername.domain.com".
    Therefore, the MOM Server cannot complete configuration of agent on the computer.
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: 800706BA
    Error Description: The RPC server is unavailable.
    800706BA
    1.  Firewall blocking NetBIOS ports
    2.  DNS resolution issue.  Make sure the agent can ping the MS by NetBIOS and FQDN.  Make sure the MS can ping the agent by NetBIOS
    and FQDN
    3.  Firewall blocking ICMP
    4.  RPC services stopped.
    The MOM Server failed to acquire lock to remote computer servername.domain.com. This means there is already an agent management operation proceeding
    on this computer, please retry the Push Agent operation after some time.
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: 80072971
    Error description: Unknown error 0x80072971
    80072971
    This problem occurs if the LockFileTime.txt file is located in the following folder on the remote computer:
    %windir%\422C3AB1-32E0-4411-BF66-A84FEEFCC8E2
    When you install or remove a management agent, the Operations Manager 2007 management server copies temporary files to the remote computer. One
    of these files is named LockFileTime.txt. This lock file is intended to prevent another management server from performing a management agent installation at the same time as the current installation. If the management agent installation is unsuccessful and
    if the management server loses connectivity with the remote computer, the temporary files may not be removed. Therefore, the LockFileTime.txt may remain in the folder on the remote computer. When the management server next tries to perform an agent installation,
    the management server detects the lock file. Therefore, the management agent installation is unsuccessful.
    http://support.microsoft.com/kb/934760/en-us
    The MOM Server detected that the following services on computer "(null);NetLogon" are not running. These services are required for push
    agent installation. To complete this operation, either start the required services on the computer or install the MOM agent manually by using MOMAgent.msi located on the product CD.
    Operation: Agent Install
    Remote Computer Name: servername.domain.com Install account: DOMAIN\account
    Error Code: C000296E
    Error Description: Unknown error 0xC000296E
    C000296E
    1.  Netlogon service is not running.  It must be set to auto/started
    The MOM Server detected that the following services on computer
    "winmgmt;(null)" are not running
    C000296E
    1.  WMI services not running or WMI corrupt
    The MOM Server detected that the Windows Installer service (MSIServer) is disabled on computer "servername.domain.com". This service is
    required for push agent installation. To complete this operation on the computer, either set the MSIServer startup type to "Manual" or "Automatic", or install the MOM agent manually by using MOMAgent.msi located on the product CD.
    Operation: Agent Install
    Install account: DOMAIN\account
    Error Code: C0002976
    Error Description: Unknown error 0xC0002976
    C0002976
    1.  Windows Installer service is not running or set to disabled – set this to manual or auto and start it.
    The Agent Management Operation Agent Install failed for remote computer servername.domain.com.
    Install account: DOMAIN\account
    Error Code: 80070643
    Error Description: Fatal error during installation.
    Microsoft Installer Error Description:
    For more information, see Windows Installer log file "C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameAgentInstall.LOG
    C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameMOMAgentMgmt.log" on the Management Server.
    80070643
    1.  Enable the automatic Updates service…. Install the agent – then disable the auto-updates service if desired.
    Call was canceled by the message filter
    80010002
    Install latest SP and retry. One server that failed did not have Service pack installed
    The MOM Server could not find directory \\I.P.\C$\WINDOWS\. Agent will not be installed on computer "name". Please verify the required
    share exists.
    80070006
    1.  Manual agent install
    Possible locking on registry?
    http://www.sysadmintales.com/category/operations-manager/
    Try manual install.
    Verified share does not exist.
    The network path was not found.
    80070035
    1.  Manual agent install
    The Agent Management Operation Agent Install failed for remote computer "name". There is not enough space on the disk.
    80070070
    1.  Free space on install disk
    The MOM Server failed to perform specified operation on computer "name". The semaphore timeout period has expired.
    80070079
    NSlookup failed on server. Possible DNS resolution issue.
    Try adding dnsname to dnssuffix search list.
    The MOM Server could not start the MOMAgentInstaller service on computer "name" in the time.
    8007041D
    80070102
    NSlookup failed on server. Possible DNS resolution issue.
    Verify domain is in suffix search list on management servers.
    The Agent Management Operation Agent Install failed for remote computer "name"
    80070643
    1.  Ensure automatic updates service is started
    2.  Rebuild WMI repository
    3.  DNS resolution issue
    The Agent Management Operation Agent Install failed for remote computer "name". Another installation is already in progress.
    80070652
    Verify not in pending management. If yes, remove and then attempt installation again.
    The MOM Server detected that computer "name" has an unsupported operating system or service pack version
    80072977
    Install latest SP and verify you are installing to Windows system.
    Not discovered
    Agent machine is not a member of domain
    Ping fails
    1.  Server is down
    2.  Server is blocked by firewall
    3.  DNS resolving to wrong IP.
    Fail to resolve machine
    1.  DNS issue
    The MOM Server failed to perform specified operation on computer "name". Not enough server storage…
    8007046A
    1.  This is typically a memory error caused by the remote OS that the agent is being installed on.
    There are currently no logon servers available to service the logon request.
    8007051F
    1.  Possible DNS issue
    This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version
    of the Windows Installer service.
    8007064D
    1.  Install Windows Installer 3.1
    The network address is invalid
    800706AB
    Possible DNS name resolution issue.
    Tried nslookup on server name and did not get response.
    Verify domain is in suffix search list on management servers.
    The MOM Server failed to perform specified operation on computer servername.domain.com
    80070040
    1.  Ensure agent push account has local admin rights
    The MOM Server detected that the actual NetBIOS name SERVERNAME is not same as the given NetBIOS name provide for remote computer SERVERNAME.domain.com.
    80072979
    1.  Correct DNS/WINS issue.
    2.  Try pushing to NetBIOS name
    Gautam.75801

  • ITunes 10.6.1 install failed

    The system attempted to automatically update iTunes recently. It failed. I was busy at the time so I didn't really pay any attention to it. Fast forward a few days to now. When I launch iTunes, I am told "This copy of iTunes is corrupted or is not installed correctly. Please reinstall iTunes." I tried to do just that. I downloaded the 10.6.1 installer from Apple and attempted to install it. Again, the installation failed. Below are the Console messages. How do I correct this problem? I have already repaired disk permissions, verified the disk, and rebooted. The most notable things I did recently were:
    1) Updated Xcode from the App Store app. When the download and update completed, I accidentally hit the update all button in the App Store app again causing Xcode to start downloading. I immediately paused the download. The paused download disappeared from the App Store app's available updates list but it did appear in Launchpad. I tried to delete paused download from Launchpad and it didn't appear to work but somehow, it is now nowhere to be found in Launchpad.
    2) Streamed videos from my MacBook to my new Apple TV. Incidentally, the Apple TV malfunctioned (all icons but Computers and Settings were displayed) and I had to reset it to factory defaults. It works again.
    3/30/12 11:27:06.200 PM Installer: iTunes  Installation Log
    3/30/12 11:27:06.200 PM Installer: Opened from: /Volumes/iTunes 10.6.1/Install iTunes.pkg
    3/30/12 11:27:06.453 PM Installer: Performance: Please update this scripting addition to supply a value for ThreadSafe for each event handler: "/Library/ScriptingAdditions/SIMBL.osax"
    3/30/12 11:27:08.509 PM Installer: InstallerStatusNotifications plugin loaded
    3/30/12 11:27:19.290 PM Installer: ================================================================================
    3/30/12 11:27:19.290 PM Installer: User picked Standard Install
    3/30/12 11:27:19.290 PM Installer: Choices selected for installation:
    3/30/12 11:27:19.290 PM Installer:           Upgrade: "iTunes"
    3/30/12 11:27:19.290 PM Installer:           Upgrade: "Apple Mobile Device Support"
    3/30/12 11:27:19.290 PM Installer:           Upgrade: "iTunes"
    3/30/12 11:27:19.290 PM Installer: ================================================================================
    3/30/12 11:27:24.120 PM Installer: Configuring volume "Lion"
    3/30/12 11:27:24.133 PM Installer: Free space on "Lion": 170.99 GB (170993594368 bytes).
    3/30/12 11:27:24.133 PM Installer: Create temporary directory "/var/folders/63/fs0yw4ld62xdpyp0ysk7jcd00000gn/T//Install.560hqV9Ph"
    3/30/12 11:27:24.139 PM Installer: IFPKInstallElement (5 packages)
    3/30/12 11:27:24.315 PM authorizationhost: SFBuiltinEntitled: Installer.app is not entitled for system.install.apple-software
    3/30/12 11:27:24.342 PM authorizationhost: SFBuiltinEntitled: Installer.app is not entitled for system.install.app-store-software
    3/30/12 11:27:24.369 PM authorizationhost: SFBuiltinEntitled: Installer.app is not entitled for system.install.app-store-software
    3/30/12 11:27:24.370 PM com.apple.SecurityServer: Failed to authorize right 'system.install.app-store-software' by client '/System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/Resources/installd' [568] for authorization created by '/System/Library/CoreServices/Installer.app' [560]
    3/30/12 11:27:24.373 PM installd: PackageKit: ----- Begin install -----
    3/30/12 11:27:48.648 PM xpchelper: could not open dyld map file: (null)
    3/30/12 11:27:50.142 PM sudo:     root : TTY=unknown ; PWD=/private/tmp/PKInstallSandbox.MNraFl/Scripts/com.apple.pkg.AppleMobileDeviceSupport.yxOS2Q ; USER=root ; COMMAND=/bin/launchctl unload //System/Library/LaunchDaemons/com.apple.usbmuxd.plist
    3/30/12 11:27:50.000 PM kernel: Kext com.apple.driver.AppleMobileDevice not found for unload request.
    3/30/12 11:27:50.000 PM kernel: Kext com.apple.driver.AppleUSBEthernetHost not found for unload request.
    3/30/12 11:27:54.582 PM shove: [source=file] failed _RelinkFile(/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root/Applications/iTunes.app/Contents/Resources/Spanish.lproj/CDInfo.nib/keyedobjects.nib, /Applications/iTunes.app/Contents/Resources/Spanish.lproj/CDInfo.nib/keyedobjects.nib): Operation not permitted
    3/30/12 11:27:54.585 PM shove: srcPath = /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root/Applications/iTunes.app/Contents/Resources/Spanish.lproj/CDInfo.nib/keyedobjects.nib NSFileOwnerAccountID=0 NSFileHFSTypeCode=0 NSFileSystemFileNumber=7909127 NSFileExtensionHidden=0 NSFileSystemNumber=234881028 NSFileSize=12863 NSFileGroupOwnerAccountID=0 NSFileOwnerAccountName=root NSFileCreationDate=2012-03-21 07:31:07 +0000 NSFilePosixPermissions=420 NSFileHFSCreatorCode=0 NSFileType=NSFileTypeRegular NSFileGroupOwnerAccountName=wheel NSFileReferenceCount=1 NSFileModificationDate=2012-03-21 07:31:07 +0000
    3/30/12 11:27:54.586 PM shove: dstPath = /Applications/iTunes.app/Contents/Resources/Spanish.lproj/CDInfo.nib/keyedobjects.nib NSFileOwnerAccountID=0 NSFileHFSTypeCode=0 NSFileSystemFileNumber=6522007 NSFileExtensionHidden=0 NSFileSystemNumber=234881028 NSFileSize=12863 NSFileGroupOwnerAccountID=0 NSFileOwnerAccountName=root NSFileCreationDate=2012-03-07 06:13:35 +0000 NSFilePosixPermissions=420 NSFileHFSCreatorCode=0 NSFileType=NSFileTypeRegular NSFileGroupOwnerAccountName=wheel NSFileReferenceCount=1 NSFileModificationDate=2012-03-07 06:13:35 +0000
    3/30/12 11:27:54.587 PM shove: dstParentPath = /Applications/iTunes.app/Contents/Resources/Spanish.lproj/CDInfo.nib NSFileOwnerAccountID=0 NSFileSystemFileNumber=1255061 NSFileExtensionHidden=0 NSFileSystemNumber=234881028 NSFileSize=2270062258 NSFileGroupOwnerAccountID=0 NSFileOwnerAccountName=root NSFileCreationDate=1972-02-24 19:55:33 +0000 NSFilePosixPermissions=493 NSFileAppendOnly=1 NSFileType=NSFileTypeDirectory NSFileGroupOwnerAccountName=wheel NSFileReferenceCount=50889 NSFileModificationDate=1970-01-10 05:55:04 +0000 NSFileImmutable=1 XATTR=com.apple.FinderInfo
    3/30/12 11:27:54.587 PM com.apple.installd: Operation not permitted
    3/30/12 11:27:55.044 PM installd: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=120 "An unexpected error occurred while moving files to the final destination." UserInfo=0x7fb87b913c20 {NSLocalizedDescription=An unexpected error occurred while moving files to the final destination., arguments=(
        "-f",
        "-s",
        "/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root",
    ), NSUnderlyingError=0x7fb87b914c80 "The operation couldn’t be completed. Operation not permitted"} {
        NSLocalizedDescription = "An unexpected error occurred while moving files to the final destination.";
        NSUnderlyingError = "Error Domain=NSPOSIXErrorDomain Code=1 \"The operation couldn\U2019t be completed. Operation not permitted\"";
        arguments =     (
            "-f",
            "-s",
            "/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root",
    3/30/12 11:27:55.415 PM Installer: Install failed: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.
    3/30/12 11:27:55.571 PM Installer: IFDInstallController AD3348B0 state = 7
    3/30/12 11:27:55.571 PM Installer: Displaying 'Install Failed' UI.
    3/30/12 11:27:55.573 PM Installer: 'Install Failed' UI displayed message:'The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.'.
    3/30/12 11:27:55.588 PM Installer: The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.

    This problem is resolved. I deleted the old iTunes (with write permissions turned on for my account) and reinstalled successfully. Removing the deleted iTunes from Trash was troublesome even with root but after playing around with permissions and flags, I was able to remove it.

Maybe you are looking for