Linux client can't cancel print jobs in print monitor

CUPS print server on Mac OS X server 10.4
CentOS 4.4 linux client
- Mac OS X server and CentOS linux client on different authentication sources
The CentOS 4.4 linux client is configured for CUPS printing and pointed to the Mac OS X server CUPS print service.
The linux client can successfully print to available printers servered by the Mac OS X server.
The linux client has a print monitor. Normal user on linux client cannot cancel print jobs thru this print monitor. Selection of print job and pressing the 'cancel' button do not effect a cancel. Admin user on Mac OS X print server can cancel the job from the print server.
Is authorization required for a client to cancel a CUPS print job on the client?
Is same authentication setup required for both client and server?
Thanks,
-Neil

Hi,
From the Desktop, hold down the Windows key and press R. Into the Run window, type services.msc and hit enter. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the document(s) have been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Similar Messages

Can not cancel print job hp officejet 8500 in windows 8

I can not cancel print job for a HP officejet 8500 in windows 8
This question was solved.
View Solution.

Hi,
From the Desktop, hold down the Windows key and press R. Into the Run window, type services.msc and hit enter. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the document(s) have been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can I cancel mail job from SOST queue and make its status to be error or red

Do you have any idea to cancel mail job from SOST queue and make its status to be error or red (msgno = 806) by using coding ??

veekwall wrote:
Hi,
I recently (over this past summer) updated my phone and plan with Verizon. I'm from Pittsburgh, Pennsylvania, and I got the phone in Pittsburgh. It is a Droid Eris and very nice. I got it and a month later I moved to Olympia, Washington for school. Since moving there, I have hardly been able to use it. The service is terrible and its been impossible to keep in touch with my family, I wasn't even able to call them over Thanksgiving. I'm also having to pay extra money so I can use the internet on my phone, but I can't even access the internet let alone make phone calls. It's really frustrating. I can't use my phone to keep in touch with everyone in Pittsburgh-and if I am ever in trouble I wouldn't be able to call for help, which makes me really nervous. Is there a way I can cancel my 2yr contract? Yes. Just visit a Verizon store, or dial *611 from your phone and let them know you would like to cancel your account. Would I have to pay a fee-and how much would that cost? Yes, Verizon no longer waives ETFs due to moving to an area without service, so you will probably have to pay an Early Termination Fee. Since you have a smartphone, it will probably be $350 less $10 for each month of service you have completed. The Customer Service rep you contact about cancelling will be able to tell you the exact amount. Would I have to go to the Verizon store I bought the phone from to do this or would I have to do this in Washington-where I am now living and having the problems? You can do it over the phone, or at a corporate Verizon store. Help!
-Victoria

Cannot cancel a job in Batch Monitor

I am trying to compress a .mov Movie File to a QuickTime. I used the wrong Settings: Apple Intermediate Codec (AIC) before I found the right Settings: Quick Time compatible 7. I clicked Cancel on the AIC job: it says"Canceling" but continues to Process. I rebooted 3 times, turned off the computer overnight, but this morning it still says Canceling and started Processing again.
What can I do to get rid of that AIC job and do the right thing?

Sounds similar to the problem I described in this thread.
This is how I deleted the entire queue when I couldn't cancel in Batch Monitor:
1) In the Finder, select the menu item Go->Go to Folder...
2) Enter /var/spool/qmaster
3) Trash the folder(s) that you see in that folder
4) In Compressor, select the menu item Compressor->Reset Background Processing...
Mac OS X (10.4.9)

ACS 3.3.4 with Linux client

I've got some problems with a Linux wireless network connection. NetworkManager is installed on the Linux laptop. PEAP profile is created.
When the default Character String in ACS points to "Self" or his own IP adress, the Linux client can authenticate and succesfully log in to the wireless network.
When the default "Character String" is set to an extended RADIUS server, the client cannot login anymore. I created a new "Character String" that contains the @domain.local suffix. It is not working. Same problem for a Nokia (Symbian) cellphone.
What can it be ?

ACS 3.0(4) is only supported on Windows 2000/NT and not 2003

NAC with Linux client

Hi,
I have some Linux clients. When they connects to the trusted network in the first time, they are redirected to NAC login page and are required to download java runtime. I set policies so that linux client can download java and install it, but after that, the web browers (firefox) on linux client still not allow NAC login page to be loaded.
What is the root cause in this case ?
Any guy can help me!
Best regards,
NamNT

Folks, the problem is due to the fact that there are no web agents available for linux at this time. You need to create a new user page for linux with all java options disabled ( such as the one for mac address checking , ip address refresh etc ) . Make this user page on the top of the list. Also, under clean access requirements, make sure 'require use of web agent' is disabled for linux. This way, there will be web redirection and authentication only for linux clients ( no posture possible for linux ).
Thanks,
Mani

ClassCastException on linux client

Here is the problem:
If I am running Web Logic on NT.... a separate client NT machine can get
context and make calls.
If I am running Web Logic on Linux.... a separate client NT machine can get
context and make calls.
But....
A linux client can get a context from both, but cannot "cast" the
myBeanHome.
Is there some special linux client setup that I am missing? My classpaths
seem to right and almost indentitcal with my NT client setup.
Thanks

You should be able to find this doing a google search or on the sun website, however, we have still not certified the Linux client (see otn.oracle.com/products/forms and under the "papers" section there is a document "CLIENT PLATFORM STATEMENT OF DIRECTION" which documents which clients are certified. Having said that, I do know some customers are already working with the Linux clients.
Regards
Grant Ronald
Forms Product Management

Wireless Lan connection issue with Linux clients

Hi
In a large Wireless Lan enviroment for a university, we have 3 WISM moduls attached on a 6k hw - Manged by ACS v6.0.181.0
We recently upgraded the software version of the controllers from 4.x to 7.0.98.0 - the Emergency Image version is 5.2.157.0
Since then, the students with Linux clients have massive connection issue - repeated connection lost in a short time period.
However the students with Windows clients have no problem at all.
The studends report, that their linux clients getting so much of some kind of unnecessary broadcast traffic which can not be handled by the NIC - and the NIC goes down - and this happens all 5-10 minutes.
Affected Linux clients are: Ubuntu v10.10 - also OpenSuse, Fedora and Arch-linx with latest OS version.
Any Idea how I could solve this problem?
Thanks in advance for your help

Hi Nicolas
Thanks for your reply. The broadcast forwarding is disabled on WLC's.
Pls find below the attached picture, which shows the captured broadcast traffic on a linux client (sent by a student to me).
I'm not sure, if its really only the broadcast traffic, which the linux clients can not handle.
From my point of view, it seems also to be that the linux clients are somehow disadvantaged among the other clients like windows or mac, if they all trying to get a wireless connection.
But the fact is only the linux clients are affected - and this happens to the linux clients only in our wireless infrastructure.
Windows or Mac clients have no such problem at all
regards
Enis

I just upgraded and now can't cancel a print job.

The icon to delete is not there anymore. It was so easy to cancel. I'm trying to print a photo and it wanted to print on paper. That mistake will waste a lot of ink, so I want to cancel the job, but can't. Of course, I could unplug my printer, but obviously I don't want to have to do that every time I want to cancel a job. Help!

No it's not, that's the reason you should click the x if you want to cancel a print job. If is has already started, pausing it will pause a partially finished job. Subsequently canceling it may cause corrupted print output or a communications error the printer ought to handle.
If there is nothing in the print queue then the job has already been sent to the printer and your Mac is finished with it. In that case, use the printer's front panel control to cancel the job.

How to cancel printing jobs that are in the queue? Model is : HP Laserjet 3055

I wanted to print a 200 page book from my laptop, so I pluged in the printer to the laptop and pressed print on laptop. Then immediately decided not to print it, so I pressed cancel on printer. But the job has not been canceled at all. Every time I try to print something the it always starts with the job I wanted to cancel in the beginning. And on the laptop the message block asks if I wish to add to printing queue.
I would like to cancel the job that is sitting in the queue on the printer for good, if anyone can advise please help me, very desperate!!!
Thank you
Robertha
This question was solved.
View Solution.

Hi Robertha,
Open the printers folder, and then double click on the printer. Click printer, and then cancel all documents.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Pdf printing with linux client

hi,
i'm working with a SuSE 9.3 Client and I want to use PDF-Printing with the Acrobat Reader. With Windows Xp it works fine, but if i choose the PDF-Printer with the Linux-Client nothing happens. The PDF-Job exist in the cue. What do i have to do that it works?
P.S. I`am from germany ;-)

Thanks! But on which machine do i have to put the lp command?
Application-Server?
Tarantella Server?
Client?
I have put it on my Client! But nothinng happens.
My PATH --> /home/me/bin:/usr/local/sgdee:/usr/local/bin:/usr/bin:/usr/X11R6/bin:/bin:/usr/games:/opt/gnome/bin:/opt/kde3/bin:/usr/lib/jvm/jre/bin:/usr/lib/qt3/bin
my script -->
me@my-notebook:~> cat /usr/local/sgdee/lp
#!/bin/bash
LPINFILE=/tmp/.nclp.$$
PATH="/bin:/usr/bin:/usr/local/bin:/usr/bin/X11:/usr/X11R6/bin"
export PATH
[ -f $1 ] && mv $1 $LPINFILE
[ -f $2 ] && mv $2 $LPINFILE
echo "Print: $* -> $LPINFILE" >> /tmp/nclog.`logname`
echo "/usr/bin/xpdf -display $DISPLAY $LPINFILE; rm -f $LPINFILE" | at now
exit 0
me@my-notebook:~>

Print services and linux clients

Hi,
I'm installing a Windows Server 2012R2 as a printer server. It must give support to all kind of clients (windows, os x and linux).
Then, I must use event id 307 and 805 to count printed pages.
My question is related with event 307 and linux clients. I'm asking linux users to configure their CUPS to connect using samba printer, for example, \\server\printer001 but when I check event id, I get no file name (Remote Downlevel Document), and most important,
I get 0 printed pages in param8. I did some testing using IPP, but I were not able to configure a printer in linux (couldn't manage to make linux clients to validate with their domain user account when using IPP). I tried configuring printer on server to render
jobs in server with no luck. Tried PS drivers just in case it was easier to CUPS to send info to server, but no luck either.
So, basically, is there any way to configure server (or linux client) so I get page count in event 307 in printservice? If I must configure IPP printing, how may clients configure their printers to validate using domain accounts?
Thanks!

Hi,
Sorry for delaying in reply.
Linux clients see page count. I've paused printing and checked some documents. Property page from a linux client document shows as this:
Documents sent from windows clients show same but they've document name and page count.
SPL archive copied from spooler printer on Windows server shows that info is present too:
%!PS-Adobe-3.0
%%Creator: cairo 1.9.5 (http://cairographics.org)
%%CreationDate: Thu Jun 19 14:15:48 2014
%%DocumentData: Clean7Bit
%%LanguageLevel: 2
%%DocumentMedia: Letter 612 792 0 () ()
%%Orientation: Portrait
%%For: (testuser)
%%Title: (Phaser 5500 Descarga del archivo)
%RBINumCopies: 1
%%Pages: (atend)
%%BoundingBox: (atend)
%%EndComments
%%BeginProlog
%%BeginFeature: *JobPatchFile 1
% Default Definitions
userdict /xerox$pagedevice <<
/MediaClass null
/MediaPosition null
/PageSize [612 792]
/TraySwitch true
/ManualFeed false
/ImagingBBox null
/ProcessColorModel /DeviceGray
/DeviceRenderingInfo currentpagedevice 1 index get 1 dict copy
/PostRenderingEnhance false
/Install {
xerox$old_install xerox$flip {
currentpagedevice /PageSize get aload pop translate 180 rotate
} if
>> put
<--- snip snip REMOVED FOR SIMPLICITY snip snip ------>
showpage
%%Trailer
%%Pages: 1
%%BoundingBox: 0 0 612 792
%%EOF
Linux client used official PPD file downloaded from xerox webpage for linux
cups. Windows server uses Xerox Global Print Driver PS 5347.600.0.0 type 3 with
Render print jobs on client computers as suggested by Alan before.
Any other idea?

Cannot cancel print job on network B9180

I have a B9180 network connected printer with an IP number. A print job is registered and cannot be printed or cancelled from the computer that created the job. I have cancelled the job on the printer using the X button because it would not cancel from the computer.. The computer has been restarted, but the print job is still registered in the printer cue (Vista 64) for the printer. I can select the job and select cancel, the printer says it is cancelling, but does not complete the cancel.
I cannot print any new jobs due to the bad job shown in the cue.
Can someone tell me how can I cancel the bad print job and clear the cue on the computer? I have tried everything I know.
Thanks
Solved.

By Pravin Chalise
Big Computer, Kirtipur, Kathmandu, Nepal
Please go through instructions carefully:
Ist Method:
a) Open your computer and go to printer (control pannl (your printer))
b) Double click printer icon. It lists all the print jobs.
c) Right click your que job>choose 'Delete' or 'Cancle'
2nd Method:
a) Go to spool folder eg: C:\WINDOWS\system32\spool\PRINTERS (in most cases)
b) select all jobs which are in que.... and simply delete them.
Thanks !!
(tested on my computer at Canon LBP 2900)

Canceling Print jobs.

I have an HP 6500 e710n and it is setup to eprint. In my list of print jobs there is one that is pending. I can't get it to print and I can't get it to cancel. Get an error message that says Can't cancel job. How do I get rid of it because when I try to email newer jobs to the printer I get an email that says printing delayed because printer is printing, and I think it's that one pending print job doing it to me.
Thanks
Russ

i have the same problem.
what we can do?

I have a Canon MG6360 but error message says to cancel printing. How do I cancel print job from my iPad. Help please

I Have a Canon MG6360 air printer but unable to print last job. Error message says to cancel printing but how do I do this from my iPad? Help welcome please.

My hotmail was working properly until one month ago , then I do not what happens ... My mistake has been to cancel that account and try to re-load it... I am blocked at "unable to verify account details".
I read and follow carefully all your steps here above but it is not working!!
I also try to ask securiry code to mocrosoft and put it instead of hotmail password when creating new Ipad account but nothing.
I try to go everywhere on microsfot pages and on my mail account setting but I can not find any help from there. From PC is working
I try to choose "other" from the list of account and insert there hotmail account, both indicated adsHOTMAIL or OUTLOOK, but in this case it tells me "username or password for POP3.live.com are uncorrect.... what is POP3.live.com??
I already try everything find in the net here and elsewhere ... I have hotmail account since years can not thik to change it .... Some other help?? Some indication I have not yet try?
Why does not appear OUTLOOOK from the choice of default account in the "add account section"????!??!????

Linux client can't cancel print jobs in print monitor

Similar Messages

Maybe you are looking for