Linux commands to check box configuration

What are the linux commands to chekc the configuration of box, like memory, disk, OS etc

You should most find of them here: http://download-uk.oracle.com/docs/html/A97297_01/ch2_tun.htm#i17100
Message was edited by:
Pierre Forstmann

Similar Messages

  • LINUX commands for navigating Oracle_Database configuration assistant?

    I'm very new to the linux scene, but I'm very familiar with the NT Oracle side. I'm having trouble navigating around LInux looking for the commands to run Oracle. If anyone has any pointers on particulars I'd appreciate it. But to start, can someone tell me how to get the Database Configuration Assistant up in Linux on Oracle9i? I just completed installation of Oracle9i successfully(I think), but it hung on the Network configuration and Database Creation. I've found the Listener/TNS files, but I can't find the Configuration Assistant.
    Thanks to any who can help,
    Tom

    it should be in $ORACLE_HOME/bin/dbca (/opt/oracle/product/9.0.1/bin/dbca)
    I am doing this from memory so it might be off.

  • Grey out the input field as soon as check box checks on selection screen!

    HI Experts,
    In my report selection screen I have input_field1, input_field2, check_box1. Both input fields are mandatory fileds.
    My requireemnt is: If user as soon as checks the check_box1, the first input_field1 must go grey out (not allow allow to enter)!
    So I have assigned a user command to check box and assigned a modif-ID to the input_field1
    and wrote a LOOP AT SCREEN code as below,
    PARAMETERS show_all AS CHECKBOX USER-COMMAND flag.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME.
    PARAMETERS: p1 TYPE c LENGTH 10,
                p2 TYPE c LENGTH 10,
                p3 TYPE c LENGTH 10.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME.
    PARAMETERS: p4 TYPE c LENGTH 10 MODIF ID bl2,
                p5 TYPE c LENGTH 10 MODIF ID bl2,
                p6 TYPE c LENGTH 10 MODIF ID bl2.
    SELECTION-SCREEN END OF BLOCK b2.
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF show_all <> 'X' AND
           screen-group1 = 'BL2'.
           screen-active = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.
    But,am getting an error message saying "Enter all required fields"
    Pls. let me know how to fix this?
    Thank you

    I assume P1, P2 and P3 are marked as obligatory.
    You cannot achieve that. But here is an alternative to achieve a similar functionality.
    AT SELECTION-SCREEN.
      CHECK sy-ucomm EQ 'ONLI' OR sy-ucomm = 'SJOB' OR sy-ucomm = 'PRIN'.
      IF p1 is INITIAL or P2 is INITIAL or P3 is INITIAL.
        MESSAGE 'Enter all required fields' TYPE 'E'.
      ENDIF.
    AT SELECTION-SCREEN OUTPUT.
      LOOP AT SCREEN.
        IF show_all = 'X' AND
           screen-group1 = 'BL2'.
          screen-input = '0'.
        ENDIF.
        MODIFY SCREEN.
      ENDLOOP.

  • Payment Transaction check box in Posting Key configuration

    Hi all,
    Could you please enlighten me on the use of Payment transaction check box in posting key configuration screen.
    I would like to know what impact does it have if its checked and if unchecked.
    In F1 help its mentioned, Set this indicator in the posting keys for incoming payments, outgoing payments, payment differences (residual items) and payment clearing. - but I am need to know in which scenario this check box plays a role and its affect.
    Thanks,
    DSK

    Hi,
    Generally Payment Transaction checkbox will be checked for Payment Documents. Ex: PK -25 (Outgoing payment) and PK-35 (Incoming payment)
    Payment Transaction checkbox will be unchecked for Invoice Documents. Ex PK-01 (Sales Invoice) and PK-31 (Purchase Invoice)
    In this case, Default Payment Terms will be picked by system automatically at the time of invoice posting.
    Thanks
    Chandra

  • Oracle 10gR2 Installation on Linux 86(CHECKING NETWORK CONFIGURATION REQ)

    I tried to install oracle10gR2 on Redhat Linux X86 machine.
    In the middle of installation i got the following ERROR::
    checking network configuration requirements
    check complete: The overall result of this check is : Not Executed
    Recommendation: Oracle supports installation on systems with DHCP - assigned public IP addresses.
    However , the primary network Interface on the system should be configured with a static IP address
    in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the
    software on systems configured with DHCP
    Could anyone help me in this regard
    Thanks in Advance

    user12974178 wrote:
    checking network configuration requirements
    check complete: The overall result of this check is : Not Executed
    Recommendation: Oracle supports installation on systems with DHCP - assigned public IP addresses.
    However , the primary network Interface on the system should be configured with a static IP address
    in order for the Oracle Software to function properly. See the Installation Guide for more details on installing the
    software on systems configured with DHCP
    Could anyone help me in this regard
    Thanks in AdvanceYour problem is:
    "However , the primary network Interface on the system should be configured with a static IP address in order for the Oracle Software to function properly"
    Your solution is
    "See the Installation Guide for more details on installing the software on systems configured with DHCP"
    That book is at http://tahiti.oracle.com and the steps you need are in Chapter 2 of the Installation Guide for Linux.
    Now, I could assume this is Oracle 11gR2 and you are using Oracle Enterprise Linux 5 Update 4, but I won't. Assuming things gets me into trouble.

  • Strange check box behaviour on Linux

    Hi,
    I have a forms module (10g) that has a database block with a non-database checkbox. This checkbox has the following properties:
    -Value when checked: 1
    -Value when unchecked: 0
    -Check box mapping to other values: Unchecked
    -Initial value: 0
    On 10g iDS (Win2k), when the query is executed on that block, the checkbox is unchecked for all records, which is my expected behaviour.
    Running the same module on 10g ias server (Linux) against the same database shows all checkboxes checked!!
    I can bypass this by coding a post-query-trigger and setting the value to 0, but I would like to know if someone knows anything about that.
    Thanks in advance
    Gerald

    Thanks but didn't quite work.
    This is a Seam application so I have a ClientOfficeList class which looks like this.
    private static final String EJBQL = "select clientOffice from ClientOffice clientOffice";
    public ClientOfficeList() {
              clientOffice.setClientGroup(new ClientGroup());
              setEjbql(EJBQL);
              setRestrictionExpressionStrings(Arrays.asList(RESTRICTIONS));
              setMaxResults(25);
         } then the ClientOffice entity bean looks like this.
    I wasn't able to introduce a boolean property in the entity bean since it doesnt have a corresponding database column mapping
         public void setClientOffice(String clientOffice)
              this.clientOffice = clientOffice;
         @Column(name = "CLIENT_OFFICE_STATUS", nullable = false, length = 1)
         @NotNull
         public char getClientOfficeStatus()
              return this.clientOfficeStatus;
         }The xhtml looks like this
    <h:column>
                <f:facet name="header">
                    <ui:include src="layout/sort.xhtml">
                        <ui:param name="entityList" value="#{clientOfficeList}"/>
                        <ui:param name="propertyLabel" value="Office status"/>
                        <ui:param name="propertyPath" value="clientOffice.clientOfficeStatus"/>
                    </ui:include>
                </f:facet>
                <h:selectBooleanCheckbox value="#{_clientOffice.clientOfficeStatus}" />
            </h:column>

  • How to create command button called 'Remarks' and Check box in ALV GRID?

    Hi, Experts,
    Requirement is: in the ALVE GRID report output, user select a record by clicking the check box and pressing the button 'Remarks' it will take me into other transaction from the output list.
    Please help me out.
    Reward points.
    Sekhar

    Hi Chandra Shekar,
    Check the following sample program. 2 things to remember.
    1. Check the callback subroutine PF_STATUS_SET and create PF status for the program.and also ur REMARKS button in the application tool. Comments are made every where wherever those are needed. After creating Pf status execute the report.
    2.Once you select records by selecting checkboxes, u have to press on Refresh button( that is there on application toolbar), then only for selected records, CHECK field in the internal is updated. After that press on REMARKS button .
      REPORT zvenkat_alv_grid.
      TABLES:t001.
      "Types
      TYPES:
            BEGIN OF t_1001,
              check TYPE c,
              bukrs TYPE t001-bukrs,
              butxt TYPE t001-butxt,
              ort01 TYPE t001-ort01,
              land1 TYPE t001-land1,
            END OF t_1001.
      "Work area
      DATA:
            w_t001 TYPE t_1001.
      "Internal table
      DATA:
            i_t001 TYPE STANDARD TABLE OF t_1001.
      " ALV Declarations
    * Types Pools
      TYPE-POOLS:
         slis.
    * Types
      TYPES:
         t_fieldcat         TYPE slis_fieldcat_alv,
         t_events           TYPE slis_alv_event,
         t_layout           TYPE slis_layout_alv.
    * Workareas
      DATA:
         w_fieldcat         TYPE t_fieldcat,
         w_events           TYPE t_events,
         w_layout           TYPE t_layout.
    * Internal Tables
      DATA:
         i_fieldcat         TYPE STANDARD TABLE OF t_fieldcat,
         i_events           TYPE STANDARD TABLE OF t_events.
    *&    start of selection
      START-OF-SELECTION.
        PERFORM get_data.
    *&    end-of-selection.
      END-OF-SELECTION.
        PERFORM build_fieldcatlog.
        PERFORM build_events.
        PERFORM build_layout.
        PERFORM list_display.
    *&      Form  get_data
      FORM get_data .
        SELECT bukrs
               butxt
               ort01
               land1
          FROM t001
          INTO CORRESPONDING FIELDS OF TABLE i_t001
          UP TO 30 ROWS.
      ENDFORM.                    " get_data
    *&      Form  build_fieldcatlog
      FORM build_fieldcatlog .
        CLEAR:w_fieldcat,i_fieldcat[].
        PERFORM build_fcatalog USING:
                 'CHECK' 'I_T001' ' ',
                 'BUKRS' 'I_T001' 'BUKRS',
                 'BUTXT' 'I_T001' 'BUTXT',
                 'ORT01' 'I_T001' 'ORT01',
                 'LAND1' 'I_T001' 'LAND1'.
      ENDFORM.                    "BUILD_FIELDCATLOG
    *&      Form  BUILD_FCATALOG
      FORM build_fcatalog USING l_field l_tab l_text.
        w_fieldcat-fieldname      = l_field.
        w_fieldcat-tabname        = l_tab.
        w_fieldcat-seltext_m      = l_text.
        IF  l_field = 'CHECK'..
          w_fieldcat-checkbox = 'X'.
          w_fieldcat-edit     = 'X'.
        ENDIF.
        APPEND w_fieldcat TO i_fieldcat.
        CLEAR w_fieldcat.
      ENDFORM.                    " build_fieldcatlog
    *&      Form  build_events
    *       text
      FORM build_events.
        CLEAR :
              w_events, i_events[].
        w_events-name = 'TOP_OF_PAGE'."Event Name
        w_events-form = 'TOP_OF_PAGE'."Callback event subroutine
        APPEND w_events TO i_events.
        CLEAR  w_events.
        w_events-name = 'USER_COMMAND' .
        w_events-form = 'USER_COMMAND' .
        APPEND w_events TO i_events.
        CLEAR w_events.
        w_events-name = 'PF_STATUS_SET' .
        w_events-form = 'PF_STATUS_SET' .
        APPEND w_events TO i_events.
        CLEAR w_events.
      ENDFORM.                    "build_events
    *&      Form  build_layout
      FORM build_layout .
        w_layout-colwidth_optimize = 'X'.
        w_layout-zebra             = 'X'.
      ENDFORM.                    " build_layout
    *&      Form  list_display
      FORM list_display .
        DATA:
              l_program TYPE sy-repid.
        l_program = sy-repid.
        CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
          EXPORTING
            i_callback_program = l_program
            is_layout          = w_layout
            it_fieldcat        = i_fieldcat
            it_events          = i_events
          TABLES
            t_outtab           = i_t001
          EXCEPTIONS
            program_error      = 1
            OTHERS             = 2.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
      ENDFORM.                    " list_display
    *&      Form  top_of_page
      FORM top_of_page.
        DATA :
         li_header TYPE slis_t_listheader,
         w_header  LIKE LINE OF li_header.
        DATA:
              l_date TYPE char10.
        WRITE sy-datum TO l_date.
        w_header-typ  = 'H'.
        CONCATENATE sy-repid ':' 'From Date' l_date INTO w_header-info SEPARATED BY space.
        APPEND w_header TO li_header.
        CLEAR w_header.
        w_header-typ  = 'S'.
        w_header-info = sy-title.
        APPEND w_header TO li_header.
        CLEAR w_header.
        w_header-typ  = 'A'.
        w_header-info = sy-uname.
        APPEND w_header TO li_header.
        CLEAR w_header.
        CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
          EXPORTING
            it_list_commentary = li_header.
      ENDFORM.                    "top_of_page
    *&      Form  pf_status_set
      FORM pf_status_set    USING extab TYPE slis_t_extab.
        "Procedure to set own pf-status.
        "1.Goto Transaction code SE41
        "2.give program = SAPLKKBL and status = STANDARD_FULLSCREEN.
        "3.Click on Application toolbar STATUS button
        "4.Give ur program name Status name that is to be used in the program using SET pf-status statement
        "5.Create ur button REMARKS.
        SET PF-STATUS 'STATUS1' EXCLUDING extab.
      ENDFORM.                    "pf_status_set
    *&      Form  user_command
      FORM user_command USING ucomm LIKE sy-ucomm
                        selfield TYPE slis_selfield.
        CASE ucomm .
          WHEN 'REMARKS'."When u click on remarks button.
            LOOP AT i_t001 INTO w_t001 WHERE check = 'X'.
              WRITE :/ w_t001-bukrs, 'Checked'.
            ENDLOOP.
        ENDCASE.
      ENDFORM.                    "user_command
    I hope that it helps u .
    Regards,
    Venkat.O

  • ALV with Check Boxes

    Can I get a sample program of ALV (oops) with check boxes in it. thank you.

    Types: begin of lt_io.
    include structure mara. " Your Structure
    Types: style_table type lvc_t_style.
    Types: end of lt_io.
    data: lt_io type table of lt_io,
    ls_layout type lvc_s_layo,
    lt_fcat type lvc_t_fcat,
    lo_grid type ref to cl_gui_alv_grid.
    field-symbols: <io> type lt_io,
    <fcat> type lvc_s_fcat.
    ... fill your output table ....
    ls_layout-stylefname = 'STYLE_TABLE'.
    loop at lt_io assigning <io>.
    PERFORM set_style USING 'CHECKBOX' "Your Filename
    CHANGING <io>.
    endloop.
    ... Fill Your Field Catalog lt_fcat
    read table lt_fcat assigning <fcat>
    where fieldname = 'CHECKBOX'.
    <fcat>-checkbox = 'X'.
    create grid control lo_grid.
    CALL METHOD lo_grid->set_table_for_first_display
    EXPORTING
    is_layout = ls_layout
    CHANGING
    it_fieldcatalog = lt_fcat
    it_outtab = lt_io[].
    FORM set_button_to_line
    USING iv_fieldname TYPE lvc_fname
    CHANGING cs_io TYPE io.
    DATA: ls_style TYPE lvc_s_styl,
    lt_style TYPE lvc_t_styl.
    ls_style-fieldname = iv_fieldname.
    if cs_io-checkbox = ' '.
    ls_style-style = cl_gui_alv_grid=>mc_style_enabled.
    else.
    ls_style-style = cl_gui_alv_grid=>mc_style_disabled.
    endif.
    ls_style-maxlen = 2.
    INSERT ls_style INTO TABLE io-style_table.
    ENDFORM. "set_icon_to_status_line
    [/code].
    A classical report is a program that generates a single list, which must contain all of the required detail information.
    1) This procedure may result in extensive lists from which the user has to pick the relevant data.
    2) For background processing, this is the only possible method. After starting a background job, there is no way of influencing the program.
    3) The desired selections must be made beforehand and the list must provide detailed information.
    4) For dialog sessions, there are no such restrictions.
    5) The user is present during the execution of the program and can control and manipulate the program flow directly.
    6) To be able to use all advantages of the online environment, classical reporting was developed into interactive reporting.
    ALV is Application List viewer. Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length. In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output. The report output can contain up to 90 columns in the display with the wide array of display options.
    Advantages.
    Collapse multiple reports into one, drastically cutting down your report development time
    Save many hours using built-in ALV sorting, subtotaling and filtering capabilities
    Add conditional structures into your ALV report: No programming required!
    Combine ALV with display variants to meet a wide range of reporting requirements more easily
    Dynamically reorder column layouts and add/subtract fields
    Enable users and analysts to save their own personalized variants
    All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
    1. SIMPLE REPORT.
    The important function modules are
    a. Reuse_alv_list_display
    b. Reuse_alv_fieldcatalog_merge
    c. Reuse_alv_events_get
    d. Reuse_alv_commentary_write
    e. Reuse_alv_grid_display
    A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
    The important parameters are :
    I. Export :
    i. I_callback_program : report id
    ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
    iii. I_callback_user_command : routine where the function codes are handled
    iv. I_structure name : name of the dictionary table
    v. Is_layout : structure to set the layout of the report
    vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
    vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
    II. Tables :
    i. t_outtab : internal table with the data to be output
    B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
    The Important Parameters are :
    I. Export :
    i. I_program_name : report id
    ii. I_internal_tabname : the internal output table
    iii. I_inclname : include or the report name where all the dynamic forms are handled.
    II Changing
    ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
    declared in the type pool SLIS.
    C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
    Parameters :
    I. Import :
    Et_Events : The event table is returned with all possible CALLBACK events
    for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
    II. Export :
    I_List_type :
    0 = simple list REUSE_ALV_LIST_DISPLAY
    1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
    2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
    3 = hierarchical-sequential block list
    REUSE_ALV_BLOCK_LIST_HS_APPEND
    D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
    Parameters :
    I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
    This internal table has three fields :
    Typ : ‘H’ – header, ‘S’ – selection , ‘A’ - action
    Key : only when typ is ‘S’.
    Info : the text to be printed
    E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
    Parameters : same as reuse_alv_list_display
    This is an example for simple list.
    2. BLOCK REPORT
    This is used to have multiple lists continuously.
    The important functions used in this report are:
    A. REUSE_ALV_BLOCK_LIST_INIT
    B. REUSE_ALV_BLOCK_LIST_APPEND
    C. REUSE_ALV_BLOCK_LIST_HS_APPEND
    D. REUSE_ALV_BLOCK_LIST_DISPLAY
    A. REUSE_ALV_BLOCK_LIST_INIT
    Parameters:
    I. I_CALLBACK_PROGRAM
    II. I_CALLBACK_PF_STATUS_SET
    III. I_CALLBACK_USER_COMMAND
    This function module is used to set the default gui status etc.
    B. REUSE_ALV_BLOCK_LIST_APPEND
    Parameters :
    Export :
    I. is_layout : layout settings for block
    II. it_fieldcat : field catalog
    III. i_tabname : internal table name with output data
    IV. it_events : internal table with all possible events
    Tables :
    i. t_outtab : internal table with output data.
    This function module adds the data to the block.
    Repeat this function for all the different blocks to be displayed one after the other.
    C. REUSE_ALV_BLOCK_LIST_HS_APPEND
    This function module is used for hierarchical sequential blocks.
    D. REUSE_ALV_BLOCK_LIST_DISPLAY
    Parameters : All the parameters are optional.
    This function module display the list with data appended by the above function.
    Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
    3. Hierarchical reports :
    Hierarchical sequential list output.
    The function module is
    A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
    Parameters:
    I. Export:
    i. I_CALLBACK_PROGRAM
    ii. I_CALLBACK_PF_STATUS_SET
    iii. I_CALLBACK_USER_COMMAND
    iv. IS_LAYOUT
    v. IT_FIELDCAT
    vi. IT_EVENTS
    vii. i_tabname_header : Name of the internal table in the program containing the
    output data of the highest hierarchy level.
    viii. i_tabname_item : Name of the internal table in the program containing the
    output data of the lowest hierarchy level.
    ix. is_keyinfo : This structure contains the header and item table field
    names which link the two tables (shared key).
    II. Tables
    i. t_outtab_header : Header table with data to be output
    ii. t_outtab_item : Name of the internal table in the program containing the
    output data of the lowest hierarchy level.
    slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using ‘REUSE_ALV_FIELDCATALOG_MERGE’.
    Important Attributes :
    A. col_pos : position of the column
    B. fieldname : internal fieldname
    C. tabname : internal table name
    D. ref_fieldname : fieldname (dictionary)
    E. ref_tabname : table (dictionary)
    F. key(1) : column with key-color
    G. icon(1) : icon
    H. symbol(1) : symbol
    I. checkbox(1) : checkbox
    J. just(1) : (R)ight (L)eft (C)ent.
    K. do_sum(1) : sum up
    L. no_out(1) : (O)blig.(X)no out
    M. outputlen : output length
    N. seltext_l : long key word
    O. seltext_m : middle key word
    P. seltext_s : short key word
    Q. reptext_ddic : heading (ddic)
    R. ddictxt(1) : (S)hort (M)iddle (L)ong
    S. datatype : datatype
    T. hotspot(1) : hotspot
    declarations for spl.group.
    GT_SP_GROUP TYPE SLIS_T_SP_GROUP_ALV
    GT_SORT TYPE SLIS_T_SORTINFO_ALV, "for sort
    DATA: LS_SORT TYPE SLIS_SORTINFO_ALV.
      CLEAR LS_SORT.
      LS_SORT-FIELDNAME = 'FIELD1'.
      LS_SORT-SPOS      = 1.
      LS_SORT-UP        = 'X'.
      ls_sort-subtot    = 'X'. "subtotal
      APPEND LS_SORT TO E06_LT_SORT.
      APPEND LS_SORT TO E06_LT_SORT.
      LS_SORT-FIELDNAME = 'FIELD2'.
      LS_SORT-SPOS      = 2.
      LS_SORT-UP        = 'X'.
      ls_sort-subtot    = 'X'. "subtotal
      APPEND LS_SORT TO E06_LT_SORT.
    for creating the group..
      DATA: LS_SP_GROUP TYPE SLIS_SP_GROUP_ALV.
      CLEAR  LS_SP_GROUP.
      LS_SP_GROUP-SP_GROUP = 'A'.
      LS_SP_GROUP-TEXT     = TEXT-005.
      APPEND LS_SP_GROUP TO E07_LT_SP_GROUP.
    and pass this info to FM...
    layout-sUBTOTALS_TEXT = 'SUbt...'
    and pass spl group info to fieldcatalog also...
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
                I_CALLBACK_PROGRAM      = G_REPID
                IS_LAYOUT               = GS_LAYOUT
                IT_FIELDCAT             = GT_FIELDCAT[]
                IT_SPECIAL_GROUPS       = GT_SP_GROUP[]
                IT_SORT                 = GT_SORT[]
    TYPES :
      BEGIN OF ty_vbak,
        vkorg TYPE vbak-vkorg,             " Sales organization
        kunnr TYPE vbak-kunnr,             " Sold-to party
        vbeln TYPE vbak-vbeln,             " Sales document
        netwr TYPE vbak-netwr,             " Net Value of the Sales Order
        waerk TYPE vbak-waerk,             " Document currency
      END OF ty_vbak.
    DATA:
      vbak    TYPE vbak,
      gt_vbak TYPE TABLE OF ty_vbak.
    SELECT-OPTIONS :
      s_vkorg FOR vbak-vkorg,              " Sales organization
      s_kunnr FOR vbak-kunnr,              " Sold-to party
      s_vbeln FOR vbak-vbeln.              " Sales document
    SELECTION-SCREEN :
      SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
    PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
    SELECTION-SCREEN END OF LINE.
    INITIALIZATION.
      v_1 = 'Maximum of records to read'.
    START-OF-SELECTION.
      PERFORM f_read_data.
      PERFORM f_display_data.
         Form  f_read_data
    FORM f_read_data.
      SELECT vkorg kunnr vbeln netwr waerk
          UP TO p_max ROWS
        INTO TABLE gt_vbak
        FROM vbak
       WHERE kunnr IN s_kunnr
         AND vbeln IN s_vbeln
         AND vkorg IN s_vkorg.
    ENDFORM.                               " F_READ_DATA
         Form  f_display_data
    FORM f_display_data.
      TYPE-POOLS: slis.                    " ALV Global types
      DEFINE m_fieldcat.
        add 1 to ls_fieldcat-col_pos.
        ls_fieldcat-fieldname   = &1.
        ls_fieldcat-ref_tabname = 'VBAK'.
        ls_fieldcat-do_sum      = &2.
        ls_fieldcat-cfieldname  = &3.
        append ls_fieldcat to lt_fieldcat.
      END-OF-DEFINITION.
      DEFINE m_sort.
        add 1 to ls_sort-spos.
        ls_sort-fieldname = &1.
        ls_sort-up        = 'X'.
        ls_sort-subtot    = &2.
        append ls_sort to lt_sort.
      END-OF-DEFINITION.
      DATA:
        ls_fieldcat TYPE slis_fieldcat_alv,
        lt_fieldcat TYPE slis_t_fieldcat_alv,
        lt_sort     TYPE slis_t_sortinfo_alv,
        ls_sort     TYPE slis_sortinfo_alv,
        ls_layout   TYPE slis_layout_alv.
      m_fieldcat 'VKORG' ''  ''.
      m_fieldcat 'KUNNR' ''  ''.
      m_fieldcat 'VBELN' ''  ''.
      m_fieldcat 'NETWR' 'X' 'WAERK'.
      m_fieldcat 'WAERK' ''  ''.
      m_sort 'VKORG' 'X'.                  " Sort by vkorg and subtotal
      m_sort 'KUNNR' 'X'.                  " Sort by kunnr and subtotal
      m_sort 'VBELN' ''.                   " Sort by vbeln
      ls_layout-cell_merge = 'X'.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
                is_layout   = ls_layout
                it_fieldcat = lt_fieldcat
                it_sort     = lt_sort
           TABLES
                t_outtab    = gt_vbak.
    ENDFORM.                  
    Check out these sample programs
    BCALV_GRID_01
    This program illustrates how the events for print processing PRINT_TOP_OF_PAGE,
    PRINT_END_OF_PAGE, PRINT_TOP_OF_LIST,PRINT_END_OF_LIST are handled. The
    corresponding handler methods control the appearance of the list printed.
    BCALV_GRID_02
    Show a detail list in an amodal window. There is no second dynro needed in contrast to
    BCALV_GRID_03.
    BCALV_GRID_03
    This program implements a function on event DOUBLE_CLICK. According to the selected line data
    from table SBOOK is selected and displayed by a second ALV Control in a dialog dynpro.
    BCALV_GRID_04
    Illustrates the use of exceptions (lights or leds). According to the values of SFLIGHT-SEATSOCC, the
    lights are set to 1 (red), 2 (yellow) or 3 (green).
    BCALV_GRID_05
    Demonstrate the creation of an own toolbar button.
    BCALV_GRID_06
    Demonstrate the creation of an own context menu.
    BCALV_GRID_07
    Append a menu button to the standard toolbar.
    BCALV_GRID_08
    Append a menu with default button to the standard toolbar. It is exactly the same as
    BCALVC_TB_WITH_MENU except for methods HANDLE_MENU_BUTTON and HANDLE_TOOLBAR.
    Editable ALV grids
    BCALV_EDIT_01
    This report illustrates the simplest case of using an editable/noneditable ALV Grid Control.
    BCALV_EDIT_02
    This report illustrates how to set chosen cells of an ALV Grid Control editable.
    BCALV_EDIT_03
    In this example the user may change values of fields SEATSOCC (occupied seats) and/or PLANETYPE.
    The report checks the input value(s) semantically and provides protocol messages in case of error
    BCALV_EDIT_04
    This report illustrates how to add and remove lines to a table using the ALV Grid Control and how to
    implement the saving of the new data.
    BCALV_EDIT_05
    This example shows how to use checkboxes within an ALV Grid Control. You learn:
    (1) how to define a column for editable checkboxes for an attribute of your list
    (2) how to evaluate the checked checkboxes
    (3) how to switch between editable and non-editable checkboxes
    BCALV_EDIT_06
    This example shows how to define a dropdown listbox for all cells of one column in an editable ALV
    Grid Control.
    BCALV_EDIT_07
    This example shows how to define dropdown listboxes for particular cells of your output table.
    BCALV_EDIT_08
    This report implements an ALV Grid Control with an application specific F4 help. The following aspects
    are dealt with:
    (1) how to replace the standard f4 help
    (2) how to pass the selected value to the ALV Grid Control
    (3) how to build an f4 help, whose value range depend on a value of another cell.
    Check this link tooo
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/07/23/oopsALVin+ABAP&showComments=true
    The ALV Grid Control is a tool with which you can output non-hierarchical lists in a
    standardized format. The list data is displayed as a table on the screen.
    The ALV Grid Control offers a range of interactive standard list functions that users need
    frequently (find, sort, filter, calculate totals and subtotals, print, print preview, send list,
    export list (in different formats), and so on. These functions are implemented in the
    proxy object class. You as the programmer have the possibility to turn off functions not
    needed. In most cases the implementations of the standard functions provided by the
    control are sufficient. However, if required, you can adjust these implementations to
    meet application-specific needs.
    You can add self-defined functions to the toolbar, if necessary.
    The ALV Grid Control allows users to adjust the layout of lists to meet their individual
    requirements (for example, they can swap columns, hide columns, set filters for the
    data to be displayed, calculate totals, and so on). The settings (list customizing) made
    by a specific user are called a display variant. Display variants can be saved on a userspecific
    or on a global basis. If such display variants exist for a list, they can be offered
    to the user for selection. If a display variant is set as the default variant, the associated
    list is always displayed based on the settings of this variant.
    2. REUSE_ALV_LIST_DISPLAY
    REUSE_ALV_GRID_DISPLAY
    REUSE_ALV_FIELDCATALOG_MERGE
    REUSE_ALV_COMMENTARY_WRITE
    3. Use of Field Catalog is to determines the technical properties & add formating information of the column.
    6. all the definition of internal table, structure, constants are declared in a type-pool called SLIS.
    7.fieldcat-fieldname
    fieldcat-ref_fieldname
    fieldcat-tabname
    fieldcat-seltext_m
    5. Form user_command using r_ucomm like sy-ucomm rs_selfield type slis_selfield.
    Sap provides a set of ALV (ABAP LIST VIEWER) function modules which can be put into use to embellish the output of a report. This set of ALV functions is used to enhance the readability and functionality of any report output. Cases arise in sap when the output of a report contains columns extending more than 255 characters in length.
    In such cases, this set of ALV functions can help choose selected columns and arrange the different columns from a report output and also save different variants for report display. This is a very efficient tool for dynamically sorting and arranging the columns from a report output.
    The report output can contain up to 90 columns in the display with the wide array of display options.
    The commonly used ALV functions used for this purpose are;
    1. REUSE_ALV_VARIANT_DEFAULT_GET
    2. REUSE_ALV_VARIANT_F4
    3. REUSE_ALV_VARIANT_EXISTENCE
    4. REUSE_ALV_EVENTS_GET
    5. REUSE_ALV_COMMENTARY_WRITE
    6. REUSE_ALV_FIELDCATALOG_MERGE
    7. REUSE_ALV_LIST_DISPLAY
    8. REUSE_ALV_GRID_DISPLAY
    9. REUSE_ALV_POPUP_TO_SELECT
    Purpose of the above Functions are differ not all the functions are required in all the ALV Report.
    But either no.7 or No.8 is there in the Program.
    How you call this function in your report?
    After completion of all the data fetching from the database and append this data into an Internal Table. say I_ITAB.
    Then use follwing function module.
    CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
    I_CALLBACK_PROGRAM = 'Prog.name'
    I_STRUCTURE_NAME = 'I_ITAB'
    I_DEFAULT = 'X'
    I_SAVE = 'A'
    TABLES
    T_OUTTAB = I_ITAB.
    IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC .
    ENDIF.
    ENDFORM. " GET_FINAL_DATA
    The object F_IT_ALV has a field, the activity ACTVT, which can
    contain four permitted values: 01, 02, 03 and 70. Each of the
    activities 01, 02 and 70 controls the availability of particular
    functions (in the menu and the toolbar) of the ALV line item list:
    a) 01: "Settings -> Display variant -> Save..."
    b) 02: "Settings -> Display variant -> Current..." and
    "Settings -> Display variant -> Current header rows "
    c) 70: "Settings -> Display variant -> Administration..."
    Activity 03 corresponds to the minimum authorization, which is the
    most restricted one: The user can only select layouts which have
    been configured already. In particular, all of the other functions
    named above are inactive with activity 03.
    Now if you want to permit a user to change the column selection and
    the headers as well as to save the layout thus created, for example,
    but if you do not want to permit the user to administrate the
    layouts, you grant him or her the authorization for activities 01
    and 02.
    Check this link it will be mosty usefull for u
    http://www.sap-img.com/fu017.htm
    check this link
    http://abapprogramming.blogspot.com/
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5dc3e690-0201-0010-1ebf-b85b3bed962d
    Changing width of a custom container dynamically
    Display Page numbers in ALV
    Insert picture in selection screen.
    Logo in OO ALV Grid
    check these links
    http://www.sapfans.com/forums/viewtopic.php?t=20386
    http://www.sapfans.com/forums/viewtopic.php?t=85191
    http://www.sapfans.com/forums/viewtopic.php?t=88401
    http://www.sapfans.com/forums/viewtopic.php?t=17335
    Try these links
    Simple ALV report
    http://www.sapgenie.com/abap/controls/alvgrid.htm
    http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
    ALV
    1. Please give me general info on ALV.
    http://www.sapfans.com/forums/viewtopic.php?t=58286
    http://www.sapfans.com/forums/viewtopic.php?t=76490
    http://www.sapfans.com/forums/viewtopic.php?t=20591
    http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
    2. How do I program double click in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=11601
    http://www.sapfans.com/forums/viewtopic.php?t=23010
    3. How do I add subtotals (I have problem to add them)...
    http://www.sapfans.com/forums/viewtopic.php?t=20386
    http://www.sapfans.com/forums/viewtopic.php?t=85191
    http://www.sapfans.com/forums/viewtopic.php?t=88401
    http://www.sapfans.com/forums/viewtopic.php?t=17335
    4. How to add list heading like top-of-page in ABAP lists?
    http://www.sapfans.com/forums/viewtopic.php?t=58775
    http://www.sapfans.com/forums/viewtopic.php?t=60550
    http://www.sapfans.com/forums/viewtopic.php?t=16629
    5. How to print page number / total number of pages X/XX in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
    6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
    http://www.sapfans.com/forums/viewtopic.php?t=64320
    http://www.sapfans.com/forums/viewtopic.php?t=44477
    7. How can I set the cell color in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=52107
    8. How do I print a logo/graphics in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=81149
    http://www.sapfans.com/forums/viewtopic.php?t=35498
    http://www.sapfans.com/forums/viewtopic.php?t=5013
    9. How do I create and use input-enabled fields in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=84933
    http://www.sapfans.com/forums/viewtopic.php?t=69878
    10. How can I use ALV for reports that are going to be run in background?
    http://www.sapfans.com/forums/viewtopic.php?t=83243
    http://www.sapfans.com/forums/viewtopic.php?t=19224
    11. How can I display an icon in ALV? (Common requirement is traffic light icon).
    http://www.sapfans.com/forums/viewtopic.php?t=79424
    http://www.sapfans.com/forums/viewtopic.php?t=24512
    12. How can I display a checkbox in ALV?
    http://www.sapfans.com/forums/viewtopic.php?t=88376
    http://www.sapfans.com/forums/viewtopic.php?t=40968
    http://www.sapfans.com/forums/viewtopic.php?t=6919
    For More alv report examples check these Tcodes LIBS, BIBS Here u can find more number of examples on alv reports of different kinds
    check this sample code for intercative alv report
    TYPE-POOLS: SLIS.
    *type declaration for values from ekko
    TYPES: BEGIN OF I_EKKO,
           EBELN LIKE EKKO-EBELN,
           AEDAT LIKE EKKO-AEDAT,
           BUKRS LIKE EKKO-BUKRS,
           BSART LIKE EKKO-BSART,
           LIFNR LIKE EKKO-LIFNR,
           END OF I_EKKO.
    DATA: IT_EKKO TYPE STANDARD TABLE OF I_EKKO INITIAL SIZE 0,
          WA_EKKO TYPE I_EKKO.
    *type declaration for values from ekpo
    TYPES: BEGIN OF I_EKPO,
           EBELN LIKE EKPO-EBELN,
           EBELP LIKE EKPO-EBELP,
           MATNR LIKE EKPO-MATNR,
           MENGE LIKE EKPO-MENGE,
           MEINS LIKE EKPO-MEINS,
           NETPR LIKE EKPO-NETPR,
           END OF I_EKPO.
    DATA: IT_EKPO TYPE STANDARD TABLE OF I_EKPO INITIAL SIZE 0,
          WA_EKPO TYPE I_EKPO .
    *variable for Report ID
    DATA: V_REPID LIKE SY-REPID .
    *declaration for fieldcatalog
    DATA: I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
          WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV.
    DATA: IT_LISTHEADER TYPE SLIS_T_LISTHEADER.
    declaration for events table where user comand or set PF status will
    be defined
    DATA: V_EVENTS TYPE SLIS_T_EVENT,
          WA_EVENT TYPE SLIS_ALV_EVENT.
    declartion for layout
    DATA: ALV_LAYOUT TYPE SLIS_LAYOUT_ALV.
    declaration for variant(type of display we want)
    DATA: I_VARIANT TYPE DISVARIANT,
          I_VARIANT1 TYPE DISVARIANT,
          I_SAVE(1) TYPE C.
    *PARAMETERS : p_var TYPE disvariant-variant.
    *Title displayed when the alv list is displayed
    DATA:  I_TITLE_EKKO TYPE LVC_TITLE VALUE 'FIRST LIST DISPLAYED'.
    DATA:  I_TITLE_EKPO TYPE LVC_TITLE VALUE 'SECONDRY LIST DISPLAYED'.
    INITIALIZATION.
      V_REPID = SY-REPID.
      PERFORM BUILD_FIELDCATLOG.
      PERFORM EVENT_CALL.
      PERFORM POPULATE_EVENT.
    START-OF-SELECTION.
      PERFORM DATA_RETRIEVAL.
      PERFORM BUILD_LISTHEADER USING IT_LISTHEADER.
      PERFORM DISPLAY_ALV_REPORT.
    *&      Form  BUILD_FIELDCATLOG
          Fieldcatalog has all the field details from ekko
    FORM BUILD_FIELDCATLOG.
      WA_FIELDCAT-TABNAME = 'IT_EKKO'.
      WA_FIELDCAT-FIELDNAME = 'EBELN'.
      WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
      WA_FIELDCAT-TABNAME = 'IT_EKKO'.
      WA_FIELDCAT-FIELDNAME = 'AEDAT'.
      WA_FIELDCAT-SELTEXT_M = 'DATE.'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
      WA_FIELDCAT-TABNAME = 'IT_EKKO'.
      WA_FIELDCAT-FIELDNAME = 'BUKRS'.
      WA_FIELDCAT-SELTEXT_M = 'COMPANY CODE'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'IT_EKKO'.
      WA_FIELDCAT-FIELDNAME = 'BUKRS'.
      WA_FIELDCAT-SELTEXT_M = 'DOCMENT TYPE'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'IT_EKKO'.
      WA_FIELDCAT-FIELDNAME = 'LIFNR'.
      WA_FIELDCAT-NO_OUT    = 'X'.
      WA_FIELDCAT-SELTEXT_M = 'VENDOR CODE'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
    ENDFORM.                    "BUILD_FIELDCATLOG
    *&      Form  EVENT_CALL
      we get all events - TOP OF PAGE or USER COMMAND in table v_events
    FORM EVENT_CALL.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
         I_LIST_TYPE           = 0
       IMPORTING
         ET_EVENTS             = V_EVENTS
    EXCEPTIONS
       LIST_TYPE_WRONG       = 1
       OTHERS                = 2
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    "EVENT_CALL
    *&      Form  POPULATE_EVENT
         Events populated for TOP OF PAGE & USER COMAND
    FORM POPULATE_EVENT.
      READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'TOP_OF_PAGE'.
      IF SY-SUBRC EQ 0.
        WA_EVENT-FORM = 'TOP_OF_PAGE'.
        MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
    WA_EVENT-FORM.
      ENDIF.
      READ TABLE V_EVENTS INTO WA_EVENT WITH KEY NAME = 'USER_COMMAND'.
      IF SY-SUBRC EQ 0.
        WA_EVENT-FORM = 'USER_COMMAND'.
        MODIFY V_EVENTS FROM WA_EVENT TRANSPORTING FORM WHERE NAME =
    WA_EVENT-NAME.
      ENDIF.
    ENDFORM.                    "POPULATE_EVENT
    *&      Form  data_retrieval
      retreiving values from the database table ekko
    FORM DATA_RETRIEVAL.
      SELECT EBELN AEDAT BUKRS BSART LIFNR FROM EKKO INTO TABLE IT_EKKO.
    ENDFORM.                    "data_retrieval
    *&      Form  bUild_listheader
          text
         -->I_LISTHEADEtext
    FORM BUILD_LISTHEADER USING I_LISTHEADER TYPE SLIS_T_LISTHEADER.
      DATA HLINE TYPE SLIS_LISTHEADER.
      HLINE-INFO = 'this is my first alv pgm'.
      HLINE-TYP = 'H'.
    ENDFORM.                    "build_listheader
    *&      Form  display_alv_report
          text
    FORM DISPLAY_ALV_REPORT.
      V_REPID = SY-REPID.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
         I_CALLBACK_PROGRAM                = V_REPID
      I_CALLBACK_PF_STATUS_SET          = ' '
         I_CALLBACK_USER_COMMAND           = 'USER_COMMAND'
         I_CALLBACK_TOP_OF_PAGE            = 'TOP_OF_PAGE'
         I_GRID_TITLE                      = I_TITLE_EKKO
      I_GRID_SETTINGS                   =
      IS_LAYOUT                         = ALV_LAYOUT
         IT_FIELDCAT                       = I_FIELDCAT[]
      IT_EXCLUDING                      =
      IT_SPECIAL_GROUPS                 =
      IT_SORT                           =
      IT_FILTER                         =
      IS_SEL_HIDE                       =
        i_default                         = 'ZLAY1'
         I_SAVE                            = 'A'
        is_variant                        = i_variant
         IT_EVENTS                         = V_EVENTS
        TABLES
          T_OUTTAB                          = IT_EKKO
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    "display_alv_report
    *&      Form  TOP_OF_PAGE
          text
    FORM TOP_OF_PAGE.
      CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
        EXPORTING
          IT_LIST_COMMENTARY       = IT_LISTHEADER
       i_logo                   =
       I_END_OF_LIST_GRID       =
    ENDFORM.                    "TOP_OF_PAGE
    *&      Form  USER_COMMAND
          text
         -->R_UCOMM    text
         -->,          text
         -->RS_SLEFIELDtext
    FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
    RS_SELFIELD TYPE SLIS_SELFIELD.
      CASE R_UCOMM.
        WHEN '&IC1'.
          READ TABLE IT_EKKO INTO WA_EKKO INDEX RS_SELFIELD-TABINDEX.
          PERFORM BUILD_FIELDCATLOG_EKPO.
          PERFORM EVENT_CALL_EKPO.
          PERFORM POPULATE_EVENT_EKPO.
          PERFORM DATA_RETRIEVAL_EKPO.
          PERFORM BUILD_LISTHEADER_EKPO USING IT_LISTHEADER.
          PERFORM DISPLAY_ALV_EKPO.
      ENDCASE.
    ENDFORM.                    "user_command
    *&      Form  BUILD_FIELDCATLOG_EKPO
          text
    FORM BUILD_FIELDCATLOG_EKPO.
      WA_FIELDCAT-TABNAME = 'IT_EKPO'.
      WA_FIELDCAT-FIELDNAME = 'EBELN'.
      WA_FIELDCAT-SELTEXT_M = 'PO NO.'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
      WA_FIELDCAT-TABNAME = 'IT_EKPO'.
      WA_FIELDCAT-FIELDNAME = 'EBELP'.
      WA_FIELDCAT-SELTEXT_M = 'LINE NO'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
      WA_FIELDCAT-TABNAME = 'I_EKPO'.
      WA_FIELDCAT-FIELDNAME = 'MATNR'.
      WA_FIELDCAT-SELTEXT_M = 'MATERIAL NO.'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'I_EKPO'.
      WA_FIELDCAT-FIELDNAME = 'MENGE'.
      WA_FIELDCAT-SELTEXT_M = 'QUANTITY'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'I_EKPO'.
      WA_FIELDCAT-FIELDNAME = 'MEINS'.
      WA_FIELDCAT-SELTEXT_M = 'UOM'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
    WA_FIELDCAT-TABNAME = 'I_EKPO'.
      WA_FIELDCAT-FIELDNAME = 'NETPR'.
      WA_FIELDCAT-SELTEXT_M = 'PRICE'.
      APPEND WA_FIELDCAT TO I_FIELDCAT.
      CLEAR WA_FIELDCAT.
    ENDFORM.                    "BUILD_FIELDCATLOG_EKPO
    *&      Form  event_call_ekpo
      we get all events - TOP OF PAGE or USER COMMAND in table v_events
    FORM EVENT_CALL_EKPO.
      CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
       EXPORTING
         I_LIST_TYPE           = 0
       IMPORTING
         ET_EVENTS             = V_EVENTS
    EXCEPTIONS
      LIST_TYPE_WRONG       = 1
      OTHERS                = 2
      IF SY-SUBRC <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH

  • Check Box or  Drow Radio Button on Bex Query

    Hi Experts,
    Does anyone know to how to put a "Check Box" or  "Drow Radio Button" variable on query selection screen?
    The user want to switch the order data between open and completed on a same report by a check box / radio button.
    Thnaks

    Hi Linkzhou,
    Why don't you directly use a var on Actual Delivery Date & include/exclude on # cases to report open/closed shipments.
    Alternatively, You can achieve the same without making changes to backend, if you are ok with using WAD. In WAD 7, you can use a DropDown webitem instead of a RadioButton/Checkbox webitem since you cannot assign a Command on selection from a RadioButton/Checkbox webitem. Also, you would need to design the same in a web template since this will not be made available on your query selection screen.
    In the DropDown webitem, use Data Binding Type -> 'Fixed List of Options' , here you can configure
    Open -> under Action use Command 'SET_SELECTION_STATE_SIMPLE', choose your Actual Delivery Date char, Sign -> INCLUDING, Operator -> Equals, Equals -> Member Name, Member Name -> Direct Input -> # [Not Assigned]
    Closed -> under Action use Command 'SET_SELECTION_STATE_SIMPLE', choose your Actual Delivery Date char, Sign -> EXCLUDING, Operator -> Equals, Equals -> Member Name, Member Name -> Direct Input -> # [Not Assigned]
    Now when the user selects Open option from the DropDown webitem, the data provider query will be filtered for open shipments & vice versa for Closed option.
    --Priya

  • Does Pacman Have A Command To Check For Left Over Dependencies?

    Does pacman have a command to check for left over dependencies?
    I know that when you remove something it's checking for dependencies and I've seen it show these before, but I swear I removed something that had dependencies and it don't show any and just removed only the single program.
    So basically I wanted to know if there are any pacman cmds like this to check the system with and clean it up?
    THANKS
    P.S. I didn't notice anything like this in the Wiki, only for cleaning out the cache....

    jasonwryan wrote:
    DasFox wrote:One I was reading the Wiki and I overlooked the information.
    I saw no evidence of that: you might have mentioned it in your post...
    Also I'm not your noob or your boy, I'm a middle age man that's been using Linux 10 years, running a Slack box most packages and kernel all custom compiled only running OpenBox...
    So next time you want to start telling people to do the basic research before posting, stop and think that maybe they've done it already.
    Again, there was no evidence of you having done any research: without evidence there is no reason to assume what the observed behaviour contradicts...
    So I've RTFM, just be careful with your choice of words and attitude, being the MOD doesn't give you rights to SPIT on people!
    Your perception about being insulted is your own - my post contains nothing insulting or offensive, just a very clear answer to your question.
    P.S. And if you were being nice in your odd sort of way I also don't appreciate it, because when we gone out and done the research and overlooked something we have every right to come here and ask and not be told like you've done.
    You have every right to ask questions; we have every right to insist that you follow the Forum Etiquette when doing so: https://wiki.archlinux.org/index.php/Fo … ow_to_Post
    No you didn't reply which you could of simply done, or asked if I read the Wiki which would of been the proper thing, not telling me to RTFM!
    I'm like this at times because I've seen it all to often....
    Next time before telling someone, ask them, in case they forget to mention it to you...
    Anyhow let's move on....
    P.S. So I can remove those packages without a problem?
    Last edited by DasFox (2010-11-26 06:16:08)

  • Clearing Check box

    Hi,
    I have to create the credit memo based on user selected records. My program is doing it, but I am having two problems,
    1)After creating the credit memo it is not clearing those records, if I choose next set it is adding 2nd time selected records to the first time selected records and adding to previous credit memo number.
    2)If the credit memo number is already there to a record, it should not allow the same record to create another CM.
    Please help me to solve these.
    Thanks,
    Neelu.
    REPORT zsd_creditmemo  NO STANDARD PAGE HEADING.
    TABLES: zppprice, kna1.
    TYPES: BEGIN OF ty_zprice,
              mandt  TYPE mandt,
              vkorg  TYPE vkorg,
              vtweg  TYPE vtweg,
              spart  TYPE spart,
              kunnr  TYPE kunnr,
              matnr  TYPE matnr,
              crdate TYPE zcrdate,
              efdate TYPE zefdate,
              sprice TYPE zprice3,
              eprice TYPE zprice4,
              eohqty TYPE zquantity1,
              aohqty TYPE zquantity2,
              auart  TYPE auart,
              bstkd  TYPE bstkd,
              werks  TYPE werks_d,
              augru  TYPE augru,
              xblnr  TYPE xblnr,
              crmemo TYPE vbeln,
              index  TYPE sy-index,
         END OF ty_zprice.
    DATA: it_ztable TYPE TABLE OF zppprice WITH HEADER LINE,
          gt_zprice TYPE TABLE OF zppprice  WITH HEADER LINE,
          gt1_zprice TYPE TABLE OF zppprice,
          gt2_zprice TYPE TABLE OF ty_zprice,
          gt3_zprice TYPE TABLE OF ty_zprice,
          gt4_zprice TYPE TABLE OF ty_zprice,
          gs_zprice TYPE zppprice,
          gs_zprice1 TYPE ty_zprice,
          ls_zprice TYPE ty_zprice,
          wa LIKE zppprice.
    DATA: salesdocument      TYPE bapivbeln-vbeln.
    DATA: header             LIKE bapisdhd1.
    DATA: headerx            LIKE bapisdhd1x.
    DATA: item               LIKE bapisditm  OCCURS 0 WITH HEADER LINE.
    DATA: itemx              LIKE bapisditmx OCCURS 0 WITH HEADER LINE.
    DATA: partner            LIKE bapiparnr  OCCURS 0 WITH HEADER LINE.
    DATA: return1            LIKE bapiret2    OCCURS 0 WITH HEADER LINE.
    DATA: lt_schedules_in    TYPE STANDARD TABLE OF bapischdl
                                  WITH HEADER LINE.
    DATA: lt_schedules_inx   TYPE STANDARD TABLE OF bapischdlx
                                  WITH HEADER LINE.
    DATA: conditions1        LIKE bapicond OCCURS 0 WITH HEADER LINE.
    DATA: order_text         LIKE bapisdtext OCCURS 0 WITH HEADER LINE.
    DATA: lv_index TYPE sy-index,
          v_tabix TYPE sytabix,
          chbox(1)  TYPE c VALUE ' ',
          repid     TYPE sy-repid,
          lv_itemno TYPE i VALUE 10,
          lv_pprice TYPE zprice3,
          lv_lines  TYPE i,
          lv_flg     TYPE c,
          lv_cnt TYPE i.
    repid = sy-repid.
    PERFORM displaydata.
    AT USER-COMMAND.
      CASE sy-ucomm.
        WHEN 'CMEMO'.
          DESCRIBE TABLE gt_zprice LINES lv_cnt.
    *      lv_index = 1.
          DO lv_cnt TIMES.
            lv_index = sy-index + 1.
            READ LINE lv_index FIELD VALUE chbox.
            IF chbox = 'X'.
              READ TABLE gt_zprice INTO gs_zprice1 INDEX sy-index.
              IF sy-subrc EQ 0.
                gs_zprice1-index = sy-index.
                APPEND gs_zprice1 TO gt2_zprice.
                CLEAR gs_zprice1.
              ENDIF.
    *          ELSE.
    *          WRITE: /01(253) 'Please Select At least One Record'.
            ENDIF.
            clear chbox.
          ENDDO.
          gt4_zprice[] = gt2_zprice[].
          SORT gt2_zprice BY vkorg vtweg spart kunnr.
          DELETE ADJACENT DUPLICATES FROM gt2_zprice
                          COMPARING vkorg vtweg spart kunnr.
          DESCRIBE TABLE gt2_zprice LINES lv_lines.
          IF lv_lines = 1.
            LOOP AT gt4_zprice INTO gs_zprice1.
              AT NEW kunnr.
                MOVE 'Y' TO lv_flg.
              ENDAT.
              IF lv_flg EQ 'Y'.
                PERFORM headerdata.
                PERFORM texts.
                CLEAR lv_flg.
              ENDIF.
              PERFORM itemdata.
              APPEND gs_zprice1 TO gt3_zprice.
            ENDLOOP.
            PERFORM call_function.
            PERFORM update_pricetable.
            PERFORM errorcheckandcommit.
            PERFORM displaydata.
    *   WRITE: /01(253) 'Please Select Again To Create Another Credit Memo'.
            REFRESH gt2_zprice.
            CLEAR chbox.
            CLEAR lv_lines.
          ELSE.
    *          WRITE: /01(253) 'Please Select Same Customer'.
            REFRESH gt2_zprice.
            CLEAR chbox.
            EXIT.
          ENDIF.
      ENDCASE.
    *&      Form  headerdata
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM headerdata.
    * header data
    * Sales document type
      header-doc_type = gs_zprice1-auart.
      headerx-doc_type = 'X'.
    * Sales organization
      header-sales_org = gs_zprice1-vkorg.
      headerx-sales_org = 'X'.
    * Distribution channel
      header-distr_chan  = gs_zprice1-vtweg.
      headerx-distr_chan = 'X'.
    * Division
      header-division = gs_zprice1-spart.
      headerx-division = 'X'.
    * Customer PO Number
      header-purch_no_c = gs_zprice1-bstkd.
      headerx-purch_no_c = 'X'.
    * Order Reason
      header-ord_reason = gs_zprice1-augru.
      headerx-ord_reason = 'X'.
    * Ref Doc Number
      header-ref_doc_l = gs_zprice1-xblnr.
      headerx-ref_doc_l = 'X'.
      headerx-updateflag = 'I'.
    ENDFORM.                    " headerdata
    *&      Form  Texts
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM texts.
    *Texts
      order_text-itm_number  = '000000'.
      order_text-text_id = '0001'.
      order_text-langu = sy-langu.
      order_text-text_line = gs_zprice1-xblnr.
      APPEND order_text.
    ENDFORM.                    " Texts
    *&      Form  itemdata
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM itemdata.
    * Partner data
    * Sold to
      partner-partn_role = 'AG'.
      partner-partn_numb = gs_zprice1-kunnr.
      APPEND partner.
    * ITEM DATA
      itemx-updateflag = 'I'.
    * Line item number.
      item-itm_number = lv_itemno.
      itemx-itm_number = 'X'.
    * Material
      item-material = gs_zprice1-matnr.
      itemx-material = 'X'.
    * Plant
      item-plant    = gs_zprice1-werks.
      itemx-plant   = 'X'.
    * Quantity
      item-target_qty = gs_zprice1-eohqty.
      itemx-target_qty = 'X'.
      APPEND item.
      APPEND itemx.
    *Fill schedule lines
      lt_schedules_in-itm_number = lv_itemno.
      lt_schedules_in-sched_line = '0001'.
      lt_schedules_in-req_qty    = gs_zprice1-eohqty.
      APPEND lt_schedules_in.
    *Fill schedule line flags
      lt_schedules_inx-itm_number  = lv_itemno.
      lt_schedules_inx-sched_line  = '0001'.
      lt_schedules_inx-updateflag  = 'I'.
      lt_schedules_inx-req_qty     = 'X'.
      APPEND lt_schedules_inx.
    *Conditions
      lv_pprice = gs_zprice1-sprice - gs_zprice1-eprice.
      conditions1-itm_number  = lv_itemno.
      conditions1-cond_type   = 'ZCPP'.
      conditions1-cond_value  = lv_pprice.
      conditions1-currency    = 'USD'.
      conditions1-cond_unit   = 'EA'.
      conditions1-cond_p_unt = 1.
      APPEND conditions1.
      lv_itemno = lv_itemno + 10.
    ENDFORM.                    " itemdata
    *&      Form  call_function
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM call_function.
      CALL FUNCTION 'SD_SALESDOCUMENT_CREATE'
           EXPORTING
                sales_header_in     = header
                sales_header_inx    = headerx
           IMPORTING
                salesdocument_ex    = salesdocument
           TABLES
                return              = return1
                sales_items_in      = item
                sales_items_inx     = itemx
                sales_partners      = partner
                sales_schedules_in  = lt_schedules_in
                sales_schedules_inx = lt_schedules_inx
                sales_conditions_in = conditions1
                sales_text          = order_text.
    ENDFORM.                    " call_function
    *&      Form  errorcheck
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM errorcheckandcommit.
    * Check the return table.
      LOOP AT return1 WHERE type = 'E' OR type = 'A'.
        EXIT.
      ENDLOOP.
      break singireddyn.
      IF sy-subrc = 0.
        WRITE: / 'Error in creating document'.
      ELSE.
    *Commit the work.
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
             EXPORTING
                  wait = 'X'.
      ENDIF.
    ENDFORM.                    " errorcheckandcommit
    *&      Form  update_pricetable
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM update_pricetable.
      LOOP AT gt3_zprice INTO ls_zprice.
        READ TABLE gt_zprice INTO gs_zprice INDEX ls_zprice-index.
        IF sy-subrc EQ 0.
          v_tabix = sy-tabix.
          gs_zprice-crmemo = salesdocument.
          MODIFY gt_zprice
          FROM gs_zprice INDEX v_tabix TRANSPORTING crmemo.
        ENDIF.
      ENDLOOP.
    *  REFRESH:gt3_zprice.
      LOOP AT gt_zprice.
        wa-vkorg = gt_zprice-vkorg.
        wa-vtweg = gt_zprice-vtweg.
        wa-spart = gt_zprice-spart.
        wa-kunnr = gt_zprice-kunnr.
        wa-matnr = gt_zprice-matnr.
        wa-crdate = gt_zprice-crdate.
        wa-efdate = gt_zprice-efdate.
        wa-sprice = gt_zprice-sprice.
        wa-eprice = gt_zprice-eprice.
        wa-eohqty = gt_zprice-eohqty.
        wa-aohqty = gt_zprice-aohqty.
        wa-auart = gt_zprice-auart.
        wa-bstkd = gt_zprice-bstkd.
        wa-werks = gt_zprice-werks.
        wa-augru = gt_zprice-augru.
        wa-xblnr = gt_zprice-xblnr.
        wa-crmemo = gt_zprice-crmemo.
        MODIFY zppprice FROM wa.
        CLEAR: wa, zppprice.
      ENDLOOP.
    ENDFORM.
    *&      Form  Displaydata
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM displaydata.
      SET PF-STATUS 'LIST'.
      NEW-PAGE LINE-SIZE 253.
      SELECT * FROM zppprice
               INTO TABLE gt_zprice.
      WRITE: /01(253) sy-uline.
      LOOP AT gt_zprice INTO gs_zprice.
        SELECT SINGLE name1 FROM kna1 INTO kna1-name1
                       WHERE kunnr = gs_zprice-kunnr.
        WRITE: /01 sy-vline,
                02 chbox AS CHECKBOX,
                04 sy-vline,
                05 gs_zprice-vkorg,
                10 sy-vline,
                11 gs_zprice-vtweg,
                14 sy-vline,
                15 gs_zprice-spart,
                18 sy-vline,
                19 gs_zprice-kunnr,
                30 sy-vline,
                31 kna1-name1,
                67 sy-vline,
                68 gs_zprice-matnr,
                87 sy-vline,
                88 gs_zprice-crdate,
                98 sy-vline,
                99 gs_zprice-efdate,
                110 sy-vline,
                111 gs_zprice-sprice,
                127 sy-vline,
                128 gs_zprice-eprice,
                145 sy-vline,
                146 gs_zprice-eohqty,
                157 sy-vline,
                158 gs_zprice-aohqty,
                169 sy-vline,
                170 gs_zprice-auart,
                175 sy-vline,
                176 gs_zprice-bstkd,
                212 sy-vline,
                213 gs_zprice-werks,
                218 sy-vline,
                219 gs_zprice-augru,
                223 sy-vline,
                224 gs_zprice-xblnr,
                241 sy-vline,
                242 gs_zprice-crmemo,
                253 sy-vline.
    *    CLEAR zppprice.
      ENDLOOP.
      WRITE: /01(253) sy-uline.
    *  CLEAR zppprice.
    *  CLEAR chbox.
    ENDFORM.                    " Displaydata

    Hello Neelu,
    once user select check box and it will create credit memo,so selected records it contains one value would be 'X'.,
    After BAPI FM use delete command where field = 'X'. so it will delete those records. so now you have remaining records.
    do not use exit or someother command,here you are just deleting the internal table data  and so no worries.
    <b>it any of the selected records have CM number can I come out of the loop and exit.</b>
    look at real time requirement ,some time user will select one check box and create credit memo ,again he will select other check boxes too. so use simple delete command.
    Thanks
    Seshu

  • Check boxes are not being displayed in any list applets

    Issue: The check boxes are not being displayed in any list applets in the system. A check box can be marked in the system, but as soon as the user clicks anywhere outside of the box the check box 'visibly' disappears. If you hover the mouse over the check box it displays a 'Y'. However, check boxes are working fine for the form applet, the issue is only with the list applet.
    I verified the checkboxes work fine in the thick client and in production. However, it is the testing environment, which belongs to client, that is showing the above behavior. I think there is some setting that is missing for them. But I am unable to figure it. I would really appreciate if someone could help !!
    Thanks in advance

    One way that you could make it work (just tried it out again) is to use the windings font
    and use the checkboxes from there. However, you need to register the font with xml publisher. In the template builder for Word, you can put a configuration file under:
    C:\Program Files\Oracle\XML Publisher Desktop\Template Builder for Word\config
    (depnding on your installation). The file should have the name xdo.cfg or xdoconfig.xml.
    There is an example file: xdo example.cfg that you rename and change accoringly.
    The font is there setup for windows 2000 as an example. Select the correct font
    path - for my XP it is:
    <font family="Wingdings" style="normal" weight="normal">
    <truetype path="C:\WINDOWS\fonts\wingding.ttf" />
    </font>
    Then you can put the symbols into your RTF template and it will be rendered.
    At least it worked for me - with 5.6.2. (Availbable on Wednesday or Thursday), but
    I am pretty sure I tried it before with 5.5.
    Didn't have the 5.5 manual with me - so I have to check what that says again..
    Hope it helps,
    Klaus

  • Selection using check box in std ALV grid!

    Hi all,
    I have written a custom report to show the O/p in ALV grid.
    This is my code:
    TABLES :zpo_loi.
    TYPE-POOLS : slis.
    TYPE-POOLS: icon.
    TABLES : sscrfields.
    DATA : ls_composer TYPE ssfcompop,
               ls_control TYPE ssfctrlop.
    DATA : wa_return TYPE TABLE OF bapiret2  ,
            wa_address TYPE bapiaddr3.
    DATA : wa_crmd_orderadm_h TYPE zpo_loi,
           it_po TYPE TABLE OF crmd_orderadm_h,
           wa_po TYPE bbp_pds_header.
    DATA : it_tab TYPE TABLE OF zpo_loi.
    DATA :  it_data TYPE TABLE OF crmd_orderadm_h,
            wa_data TYPE bbp_pds_header,
            et_data TYPE bbps_sf_po_output.
    DATA : w_formname TYPE tdsfname ,
           w_sfname TYPE rs38l_fnam.
    DATA :it_po_no TYPE TABLE OF select_be_obj_id,
          wa_it_po_no  LIKE LINE OF it_po_no.
    DATA :r_itab TYPE ddshretval OCCURS 0.
    DATA : it_output LIKE TABLE OF zloi,
           wa_output TYPE zloi.
    DATA : w_answer TYPE c.
    DATA : g_repid LIKE sy-repid,
          g_title TYPE lvc_title,
          g_set_pf_stat TYPE slis_formname VALUE 'SET_PF_STATUS',
          g_user_command TYPE slis_formname VALUE 'USER_COMMAND',
          g_layout TYPE slis_layout_alv,
          g_print_alv TYPE slis_print_alv,
          g_variant LIKE disvariant,
          c_char_a(1) VALUE 'A',
          c_char_x(1) VALUE 'X',
          itab_alv_sort TYPE slis_t_sortinfo_alv,
          itab_alv_fcat TYPE slis_t_fieldcat_alv.
    *       Internal tables          Begin with IT_                       *
    DATA : it_fcat TYPE slis_t_fieldcat_alv,                           "---ALV
           it_disp TYPE TABLE OF zloi.
    *       Work Area for Internal tables      Begin with WA_             *
    DATA : wa_fcat TYPE slis_fieldcat_alv ,              "---ALV
           wa_layout           TYPE lvc_s_layo,               "---ALV
           wa_it_disp LIKE LINE OF it_disp.
    DATA : it_sf_po TYPE TABLE OF crmd_orderadm_h,
           wa_sf_po TYPE bbp_pds_header.
    *SELECTION-SCREEN:
    *  BEGIN OF SCREEN 500 AS WINDOW TITLE title,
    *  END OF SCREEN 500.
    *DATA : functxt TYPE smp_dyntxt.
    SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS sel_po FOR zpo_loi-zobject_id.
    SELECTION-SCREEN END OF BLOCK b1.
    SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
    PARAMETERS : pr_loi RADIOBUTTON GROUP grp1 USER-COMMAND ucom,
                 pr_fondo RADIOBUTTON GROUP grp1.
    SELECTION-SCREEN END OF BLOCK b2.
    *       At selection-screen output                                    *
    AT SELECTION-SCREEN OUTPUT.
      IF pr_fondo = 'X'.
        REFRESH sel_po.
        LOOP AT SCREEN.
          IF screen-name = text-003 OR screen-name = text-004.
            screen-input = '0'.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ELSEIF pr_loi = 'X'.
        LOOP AT SCREEN.
          IF screen-name = text-003 OR screen-name = text-004.
            screen-input = '1'.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ENDIF.
    *       At selection-screen on radiobutton                            *
    AT SELECTION-SCREEN ON RADIOBUTTON GROUP grp1.
      IF pr_fondo  = 'X'.
        REFRESH sel_po.
        LOOP AT SCREEN.
          IF screen-name = text-003 OR screen-name = text-004.
            screen-input = '0'.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ELSEIF pr_loi = 'X'.
        LOOP AT SCREEN.
          IF screen-name = text-003 OR screen-name = text-004.
            screen-input = '1'.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ENDIF.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_po-low.
      PERFORM populate_table.
      PERFORM f4_help.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_po-high.
      PERFORM populate_table.
      PERFORM f4_help.
    *       At selection-screen                                           *
    AT SELECTION-SCREEN.
    *---CHECKING THE INPUT >>>
      IF sy-ucomm = 'ONLI'.
        PERFORM f002-check_input.
        PERFORM f001-check.
      ENDIF.
    *&      Form  POPULATE_TABLE
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM populate_table .
      SELECT zobject_id
               description
      FROM zpo_loi
      INTO CORRESPONDING FIELDS OF TABLE it_tab.
      SORT it_tab BY zobject_id ASCENDING.
    ENDFORM.                    " POPULATE_TABLE
    *&      Form  F4_HELP
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM f4_help .
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
        EXPORTING
          ddic_structure = ' '
          retfield       = 'ZOBJECT_ID'
          dynpprog       = sy-repid
          dynpnr         = sy-dynnr
          dynprofield    = 'A'
          value_org      = 'S'
        TABLES
          value_tab      = it_tab
          return_tab     = r_itab.
    ENDFORM.                                                    " F4_HELP
    *&      Form  F001-CHECK
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM f001-check .
      IF pr_fondo = 'X'.
        PERFORM display_expiring_fondos.
      ELSEIF pr_loi = 'X'.
        PERFORM fetch_po_det.
        PERFORM build_fcat.
        PERFORM alv_display.
      ENDIF.
    ENDFORM.                    " F001-CHECK
    *&      Form  F002-CHECK_INPUT
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM f002-check_input .
      IF pr_loi = 'X'.
        REFRESH it_po.
        IF sel_po-low IS NOT INITIAL.
          SELECT object_id
          FROM crmd_orderadm_h
          INTO CORRESPONDING FIELDS OF TABLE it_po
          WHERE object_type = 'BUS2201'
          AND object_id = sel_po-low.
          IF sy-subrc NE 0.
            IF sel_po-high IS NOT INITIAL.
              SELECT object_id
              FROM crmd_orderadm_h
              INTO CORRESPONDING FIELDS OF TABLE it_po
              WHERE object_type = 'BUS2201'
              AND  object_id = sel_po-high.
              IF sy-subrc NE 0.
                MESSAGE e009(zsrm).
              ENDIF.
            ENDIF.
            MESSAGE e007(zsrm).
          ENDIF.
        ELSE.
          MESSAGE e010(zsrm).
        ENDIF.
        IF sel_po-high IS NOT INITIAL.
          SELECT object_id
          FROM crmd_orderadm_h
          INTO CORRESPONDING FIELDS OF TABLE it_po
          WHERE object_type = 'BUS2201'
          AND  object_id = sel_po-high.
          IF sy-subrc NE 0.
            MESSAGE e008(zsrm).
          ENDIF.
        ENDIF.
      ENDIF.
    ENDFORM.                    " F002-CHECK_INPUT
    *&      Form  FETCH_PO_DET
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM fetch_po_det .
      REFRESH it_po.
      it_po_no[] = sel_po[].
      DATA : w_count TYPE i,
             w_lines TYPE c,
             wa_header TYPE bbp_pds_po_header_d.
      REFRESH : it_po,it_output.
      IF sel_po-high IS NOT INITIAL.
        SELECT object_id
               description
               posting_date
               created_by
        FROM crmd_orderadm_h
        INTO CORRESPONDING FIELDS OF TABLE it_po
        WHERE object_type = 'BUS2201'
        AND object_id BETWEEN sel_po-low AND sel_po-high.
      ELSE.
        SELECT object_id
               description
               posting_date
               created_by
        FROM crmd_orderadm_h
        INTO CORRESPONDING FIELDS OF TABLE it_po
        WHERE object_type = 'BUS2201'
        AND object_id = sel_po-low.
      ENDIF.
      w_lines = sy-dbcnt.
      w_count = 1.
      DO.
        IF w_count LE w_lines.
          READ TABLE it_po INTO wa_po INDEX w_count.
          MOVE wa_po-object_id TO wa_output-zzpono.
          MOVE wa_po-description TO wa_output-zzpodesc.
          MOVE wa_po-posting_date TO wa_output-zzpodate.
          MOVE wa_po-created_by TO wa_output-zzpocreator.
          CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
            EXPORTING
              i_object_id = wa_output-zzpono
            IMPORTING
              e_header    = wa_header.
          CALL FUNCTION 'BAPI_USER_GET_DETAIL'
            EXPORTING
              username = wa_output-zzpocreator
            IMPORTING
              address  = wa_address
            TABLES
              return   = wa_return.
          CLEAR wa_output-zzpocreator.
          CONCATENATE wa_address-firstname '   '  wa_address-lastname INTO wa_output-zzpocreator .
          MOVE wa_header-total_value TO wa_output-zzpoval.
          MOVE wa_header-currency TO wa_output-zzpocur.
          APPEND wa_output TO it_output.
          w_count = w_count + 1.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
    ENDFORM.                    " FETCH_PO_DET
    *&      Form  BUILD_FCAT
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM build_fcat .
      g_repid = sy-repid.
      g_title = 'Print LOI details'.
      g_print_alv-no_print_listinfos = 'X'.
      g_variant-report = sy-repid.
      g_variant-variant = sy-title.
      CLEAR g_layout.
      g_layout-f2code = ' '.
      wa_layout-zebra       = 'X'.
      g_layout-flexible_key = 'X'.
      g_layout-colwidth_optimize = 'X'.
      g_layout-detail_initial_lines = 'X'.
      g_layout-box_fieldname = 'ZZCHECK'.
      REFRESH it_fcat.
    *Po no
      CLEAR wa_fcat.
      wa_fcat-fieldname = 'ZZPONO' .
      wa_fcat-tabname = 'IT_DISP'.
      wa_fcat-seltext_m  = 'Purchase Order'.
    *wa_fcat-seltext_s = 'Purchase Order.
      wa_fcat-icon = 'X'.
      wa_fcat-col_pos = '2'.
      wa_fcat-outputlen = 10.
      APPEND wa_fcat TO it_fcat.
    *Description
      CLEAR wa_fcat.
      wa_fcat-fieldname = 'ZZPODESC' .
      wa_fcat-tabname = 'IT_DISP'.
    *wa_fcat-seltext_l = 'Description'.
      wa_fcat-seltext_m = 'Description'.
    *wa_fcat-seltext_s = 'Description'.
      wa_fcat-col_pos = '3'.
      wa_fcat-outputlen = 10.
      APPEND wa_fcat TO it_fcat.
    *Posting date
      CLEAR wa_fcat.
      wa_fcat-fieldname = 'ZZPODATE' .
      wa_fcat-tabname = 'IT_DISP'.
      wa_fcat-seltext_l = 'Posting Date'.
      wa_fcat-seltext_m = 'Posting Date'.
    *wa_fcat-seltext_s = 'Posting Date'.
      wa_fcat-col_pos = '4'.
      wa_fcat-outputlen = 8.
      APPEND wa_fcat TO it_fcat.
    *value
      CLEAR wa_fcat.
      wa_fcat-fieldname = 'ZZPOVAL' .
      wa_fcat-tabname = 'IT_DISP'.
    *wa_fcat-seltext_l = 'PO value'.
      wa_fcat-seltext_m = 'PO value'.
    *wa_fcat-seltext_s = 'PO value'.
      wa_fcat-col_pos = '5'.
      wa_fcat-outputlen = 15.
      wa_fcat-no_zero = 'X'.
      APPEND wa_fcat TO it_fcat.
    *Currency
      CLEAR wa_fcat.
      wa_fcat-fieldname = 'ZZPOCUR' .
      wa_fcat-tabname = 'IT_DISP'.
    *wa_fcat-seltext_l = 'PO Currency'.
      wa_fcat-seltext_m = 'PO Currency'.
    *wa_fcat-seltext_s = 'PO Currency'.
      wa_fcat-col_pos = '6'.
      wa_fcat-outputlen = 5.
      APPEND wa_fcat TO it_fcat.
    *Creator
      CLEAR wa_fcat.
      wa_fcat-fieldname = 'ZZPOCREATOR' .
      wa_fcat-tabname = 'IT_DISP'.
    *wa_fcat-seltext_l = 'Buyer'.
      wa_fcat-seltext_m = 'Buyer'.
    *wa_fcat-seltext_s = 'Buyer'.
      wa_fcat-col_pos = '7'.
      wa_fcat-outputlen = 12.
      APPEND wa_fcat TO it_fcat.
    ENDFORM.                    " BUILD_FCAT
    *&      Form  ALV_DISPLAY
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM alv_display .
      SORT it_output BY zzpono.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program       = g_repid
          i_callback_pf_status_set = g_set_pf_stat
          i_callback_user_command  = g_user_command
          i_grid_title             = g_title
          is_layout                = g_layout
          it_fieldcat              = it_fcat[]
          is_variant               = g_variant
          is_print                 = g_print_alv
        TABLES
          t_outtab                 = it_output[]
        EXCEPTIONS
          program_error            = 1
          OTHERS                   = 2.
      IF sy-subrc <> 0.
      ENDIF.
    ENDFORM.                    " ALV_DISPLAY
    *&      Form  user_command
    *       text
    *      -->R_UCOMM      text
    *      -->RS_SELFIELD  text
    FORM user_command USING r_ucomm LIKE sy-ucomm
    rs_selfield TYPE slis_selfield.                             "#EC CALLED
      DATA: gd_repid LIKE sy-repid, "Exists
      ref_grid TYPE REF TO cl_gui_alv_grid.
      IF ref_grid IS INITIAL.
        CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
          IMPORTING
            e_grid = ref_grid.
      ENDIF.
      IF NOT ref_grid IS INITIAL.
        CALL METHOD ref_grid->check_changed_data .
      ENDIF.
      rs_selfield-refresh = 'X'.
      CASE r_ucomm.
        WHEN 'PRINTLOI'.
          PERFORM call_sf.
        WHEN 'BACK'.
          CALL SELECTION-SCREEN 1000.
        WHEN 'CANCEL'.
          CALL SELECTION-SCREEN 1000.
        WHEN 'EXIT'.
          CALL SELECTION-SCREEN 1000.
      ENDCASE.
    ENDFORM.                    "user_command
    *&      Form  set_pf_status
    *       text
    *      -->RT_EXTAB   text
    FORM set_pf_status USING rt_extab TYPE slis_t_extab.
      SET PF-STATUS 'ZALV' EXCLUDING rt_extab.
      SET TITLEBAR 'ZALV'.
    ENDFORM.                    "set_pf_status
    *&      Form  CALL_SF
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM call_sf .
      REFRESH it_sf_po.
      LOOP AT it_output INTO wa_output WHERE zzcheck = 'X'.
        wa_sf_po-object_id = wa_output-zzpono.
        APPEND wa_sf_po TO it_sf_po.
      ENDLOOP.
      w_formname = 'ZSR_EBP_DOCU_LETTEROFINTENT1'.
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = w_formname
        IMPORTING
          fm_name            = w_sfname
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
      IF sy-subrc <> 0.
      ENDIF.
      ls_composer-tdnewid = 'X'.
      ls_control-no_dialog = 'X'.
      LOOP AT it_sf_po INTO wa_sf_po.
        CALL FUNCTION w_sfname
          EXPORTING
            control_parameters = ls_control
            output_options     = ls_composer
            wa_object          = wa_sf_po
          EXCEPTIONS
            formatting_error   = 1
            internal_error     = 2
            send_error         = 3
            user_canceled      = 4
            OTHERS             = 5.
        IF sy-subrc <> 0.
        ENDIF.
      ENDLOOP.
    ENDFORM.                    " CALL_SF
    *&      Form  DISPLAY_EXPIRING_FONDOS
    *       text
    *  -->  p1        text
    *  <--  p2        text
    FORM display_expiring_fondos .
      SET PF-STATUS 'ZLOI'.
      SET TITLEBAR 'ZLOI'.
      TYPES : BEGIN OF ty_output1,
                guid TYPE bbp_guid,
                object_id TYPE crmt_object_id_db,
                description TYPE crmt_process_description,
                posting_date TYPE crmt_posting_date,
                zzfondo_dat TYPE zfondo_dat,
                created_by TYPE crmt_created_by,
               END OF ty_output1.
      DATA : it_output1 TYPE TABLE OF ty_output1,
             wa_output1 TYPE ty_output1,
              w_lines,
              w_count,
              it_fondo TYPE TABLE OF zsr_fondo,
              it_temp_fondo TYPE TABLE OF zsr_fondo,
              wa_temp_fondo TYPE zsr_fondo,
              wa_fondo TYPE zsr_fondo,
              w_diff TYPE p,
              wa_header1  TYPE bbp_pds_po_header_d.
      CONSTANTS : c_otype(8) VALUE 'BUS2201'.
      REFRESH : it_output1,it_temp_fondo,it_fondo.
      SELECT b~zzfondo_dat
             a~guid
             a~object_id
             a~description
             a~posting_date
             a~created_by
      INTO CORRESPONDING FIELDS OF TABLE it_output1
      FROM bbp_pdhsc AS b
      LEFT OUTER JOIN crmd_orderadm_h AS a ON b~guid = a~guid
      AND a~object_type = c_otype.
      LOOP AT it_output1 INTO wa_output1.
        CALL FUNCTION '/SDF/CMO_DATETIME_DIFFERENCE'
          EXPORTING
            date1            = sy-datum
            date2            = wa_output1-zzfondo_dat
          IMPORTING
            datediff         = w_diff
          EXCEPTIONS
            invalid_datetime = 1
            OTHERS           = 2.
        IF sy-subrc <> 0.
        ENDIF.
        IF w_diff <= '7'.
          wa_temp_fondo-zzpono = wa_output1-object_id.
          APPEND wa_temp_fondo TO it_temp_fondo.
        ENDIF.
      ENDLOOP.
    *select the final entries for PO whose FONDO is expiring
      DESCRIBE TABLE it_temp_fondo LINES w_lines.
      w_count = 1.
      DO.
        IF w_count LE w_lines.
          READ TABLE it_temp_fondo INTO wa_temp_fondo INDEX w_count.
          IF sy-subrc = 0.
            CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
              EXPORTING
                i_object_id = wa_temp_fondo-zzpono
              IMPORTING
                e_header    = wa_header1.
            wa_fondo-zzpono = wa_temp_fondo-zzpono.
            wa_fondo-zzpodesc = wa_header1-description.
            wa_fondo-zzpodate =  wa_header1-posting_date.
            wa_fondo-zzexpdate = wa_header1-zzfondo_dat.
            wa_fondo-zzpoval = wa_header1-total_value.
            wa_fondo-zzpocur = wa_header1-currency.
            wa_fondo-zzpocreator = wa_header1-created_by.
            CLEAR : wa_address.
            REFRESH wa_return.
            CALL FUNCTION 'BAPI_USER_GET_DETAIL'
              EXPORTING
                username = wa_header1-created_by
              IMPORTING
                address  = wa_address
              TABLES
                return   = wa_return.
            CLEAR wa_fondo-zzpocreator.
            CONCATENATE wa_address-firstname '   '  wa_address-lastname INTO wa_fondo-zzpocreator .
            w_count = w_count + 1.
            APPEND wa_fondo TO it_fondo.
          ENDIF.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_structure_name = 'ZSR_FONDO'
          i_grid_title     = 'EXPIRING FONDOS'
        TABLES
          t_outtab         = it_fondo[]
        EXCEPTIONS
          program_error    = 1
          OTHERS           = 2.
      IF sy-subrc <> 0.
      ENDIF.
    ENDFORM.                    " DISPLAY_EXPIRING_FONDOS
    Now in my ALV grid o/p i can see the check box but if i select one row and then try to select another the first one gets deselected.
    Can anybody tell me what is missing?

    Hi,
    Try like changing  this
    insted of
    g_layout-f2code = ' '.
    use this
    g_layout-f2code = 'DISP'. " Sets fcode for when double
    and
    g_layout-f2code = '&ETA'. " it will display POPUP screen
    Best Regards
    Ranga
    Edited by: Ranga Swamy on Nov 1, 2008 11:07 PM
    Edited by: Ranga Swamy on Nov 1, 2008 11:17 PM

  • How to read the check box value in alv report

    hi experts,
    i m working on one alv report where i m using the check box for field selection in alv display.
    but i don't know how to read the only selected fields.
    wa_fieldcat-fieldname = 'BOX'.
      wa_fieldcat-tabname = 'IT_HEADER'.
      wa_fieldcat-seltext_m = 'Box'.
      wa_fieldcat-checkbox = 'X'.
      wa_fieldcat-input = 'X'.
      wa_fieldcat-edit = 'X'.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
      wa_fieldcat-fieldname = 'AUFNR'.
      wa_fieldcat-tabname = 'IT_HEADER'.
      wa_fieldcat-seltext_m = 'Sales Doc'.
      wa_fieldcat-hotspot = 'X'.
      APPEND wa_fieldcat TO i_fieldcat.
      CLEAR wa_fieldcat.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
         i_callback_program                = v_repid
         I_CALLBACK_PF_STATUS_SET          = 'SET_PF_STATUS'
         i_callback_user_command           = 'USER_COMMAND'
         i_callback_top_of_page            = 'TOP_OF_PAGE'
         it_fieldcat                       = i_fieldcat[]
         i_save                            = 'A'
         it_events                         = v_events
        TABLES
          t_outtab                          = it_header
    EXCEPTIONS
      PROGRAM_ERROR                     = 1
      OTHERS                            = 2
    *&      Form  USER_COMMAND
          text
         -->R_UCOMM    text
         -->,          text
         -->RS_SLEFIELDtext
    FORM user_command USING r_ucomm LIKE sy-ucomm
    rs_selfield TYPE slis_selfield.
      CASE r_ucomm.
    when '&RELEAS'.
    endcase
    endform.
    i gone through some already posted que for same problem i tried options like
    loop at it_header.
    endloop.
    but i m getting box field empty.
    is there i missed something? plz sugeest.. if u have any other solution plz post...

    Have this code in your user command fm:
    * For capturing changed data
      CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
        IMPORTING
          e_grid = w_grid.
      CALL METHOD w_grid->check_changed_data
        IMPORTING
          e_valid = w_valid.
      IF w_valid = 'X'.
    loop at itab where mark = 'X'.
    endloop.
    ENDIF.
    Regards,
    Ravi

  • PO/ S.Location and GR msg check box in 'delivery/invoice' tab of header dat

    Hi all,
    Under which case the below 2 fields are required to b filled while creating a PO apart from making them mandatory fieds in document type settings.
    1. GR msg check box in 'delivery/invoice' tab of header data
    2. Storage Location data in item details
    in me59n, system unable process p.req to PO becoz it is mandatory to fill these two fields.

    Hi,
    1. GR message check box issues message to the buyer after every the goods receipt against the PO.
    Message type has to be configured for this functionality.
    2. If you are managing stock of material at storage location level , then you will need to maintain this at PO item level.
    Regards,
    Maheshwari

Maybe you are looking for

  • Service Desk Messages are not generating

    Hi All, I have done BPM to monitor some of the batch jobs of the satellite system in the Solman production system. i have defined notifications(service desk messages) so that i will get a ticket when some job will get cancelled. Same Configuration i

  • Stepper motor closed loop control using 7344

    I have some question about the closed loop control of stepper motor using 7344. From the NI website I got that closed loop steppers work differently from closed loop servos. Instead of adjusting the output on each PID iteration like a servo system, c

  • IPod won't sync purchased music, games, or video?

    Ok so i plugged my iPod in a few days ago to my computer to sync it. everything was going well until- "Some of the items in the iTunes library were not copied to the iPod because you are not authorized to play them on this computer." Now, i went into

  • 11g gateway for ODBC returns SYNTAX ERROR on query

    Hi, I have made a database link to an odbc link on a 11g gateway. The odbc driver for the database in question is called connx, a third party driver to connect to RMS files on an old vax. The odbc driver works fine as I tested it independently of the

  • Help!  looking for internet camera compatible with Mac

    I need help! I purchased a Mac recently and so far I am very happy with it. However, we just had a baby and I'd like to see and hear my baby from my computer at work. At work we use PCs and at home we havea iBook G4. I bought a D-link wireless G inte