Linux FF34 - How to set sound levels to a lower default?

The FEBE firefox extension plays a beep sound when it's backing up. My backup is at midnight on a Sunday and the PC is in another room, but the noise when it beeps nearly lifts the roof offo fo my house. Likewise, there are many sites where the site set the sound volume to a default Full Volume such as this one https://grabien.com/story.php?id=19088 (try it) and I see this:
http://i.imgur.com/PVAhbYE.png << THe CubeUtils.
It always starts off at MAX VOLUME. How do I change the default volume to always start at say 30%?

You have my empathy! This used to be obvious in versions before Mavericks. Does Apple's silence on this mean they are becoming more Microsoft-like and removing convenient features? That the question of 8 people has gone unanswered for 8 months is unconscionable.

Similar Messages

C How to Set Isolation Level in the Connection String

How to Set Isolation Level in the Connection String using the "Microsoft OLE DB Provider for DB2 Version 4.0"?
We are trying to move from Crystal Reporting that run against a IBM DB2 database on a mainfram to SSRS reporting and we have downloaded the "Microsoft OLE DB Provider for DB2 Version 4.0" and then worked with the DB2 Administrator to create the
Packages. We only have access to use the "Read Uncommitted ("MSUR001") package. We were able to connect and pull data before he removed access to the other packages, but after setting access the Connection keeps trying to use
the 'Cursor Stability (MSCS001)" package. How do we change the Default to the "Read Uncommitted ("MSUR001") package??? Since it is keeps defaulting to the the other package
we can't connect to do it in the T-SQL query, it has to be set at the Connection String level.

Hi Dannyboy1263,
According to your description, you want to set the Transaction Isolation Level in Connection String. Right?
In Reporting Services, the Connection String for OLE DB Connection can only contains Provider, Data Source and Initial Catalog. There's no property for setting Transaction Isolation Level in the Connection String. Based on my knowledge, we can
only set the Transaction Isolation Level at Query level or set it by using code (C#, VB, Java...) to call the property of Connection. So unfortunately your requirement can't be achieved currently.
Reference:
OLE DB Connection Type (SSRS)
Data Connections, Data Sources, and Connection Strings in Reporting Services
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Setting sound level on Mac

I have been trying to set the sound level on a Mac.
But even though I set the sound level to 1 - the Mac sound
bar always goes to 70% of the total volume.
There is no way to set the sound level to anything lower than
70%

try this - paste into your messge window and hit return after
each line:
_sound.soundLevel = 7
put _sound.soundLevel
_sound.soundLevel = 2
put _sound.soundLevel
you should see:
-- 2
-- 7
if you use 'beep' after each setting you should hear it
change too.
Good luck

How to set the fiscal year period as default in variables

Hi All,
How to set the fiscal year period as default it shoud take previous period when the report is executed.
And also I need to do the same changes in reporting agent.
Could you please any one help me.
Points will be given.
Thanks!
Best regards,
Ajay.

Hi Ajay,
Create a customer exit variable.Write the code in the include 'zxrsru01' using system date.
take the system date from the system date variable and using that you can get the current fiscal year period.use this value and using string commands, you can get period.
subtract 1 from this value.Using this you can get the previous fiscal period..
Please let us know, if you need the coding part
Hope it helps
Thanks,
Teja

TS1574 How do set my Built-in microphone to default?

I am using a OS X Version 10.9.1 and i want to know how to set my Built-in Microphone to Default it's a simple question and no one seems to have an answer

Ok i can hear my voice now but the settings for the Built-in Microphone are not the same as before

MOVED: I have no sound /the sound level is VERY low: MSI K9MM-v

This topic has been moved to AMD64 ATI/SiS/VIA based board.
https://forum-en.msi.com/index.php?topic=115320.0

Go to Control panel, Administrative Tools, Computer Management, Disk Management and allocate remaining disk space.
OK, i can see around 22 GB of unallocated disk space. i will allocate the remaining disk space.
Check Volume from mixer settings, cable connections, Volume on your speakers.
I have checked and i've the sam problem. the volume in my speakers is maximum and no change. the sound level is VERY low. My speakers works because i have the test in my other PC.

How to set threshold level JPG images

Please I need help with setting the right threshold value for my images. I am new with Photoshop. I need to interpret images consisting of sand oil and water in a glass medium. I need to calculate in pixels the volume of each phase (oil and water) with time. I converted the image to threshold and by default the setting is 128 level. This gives a rather high pixel value for the black background. adjust to other levels like 70 makes the white image more. Does some know how I can determine the correct threshold level to reflect that in the original image?
Also how can set the threshold value to be the same for all the files (example 600 jpg files).
Thanks a lot
Engyy

Also how can set the threshold value to be the same for all the files (example 600 jpg files).
Create an action and use batch processing or import your images as a sequence and treat it as a video in the timeline. The rest is unclear. For all intents and purposes setting a threshold is completely arbitrary and factors like the color of the sand or whatever can influence it since e.g. red sand will naturally accentuate the red channel more than green and blue. Come to think of it, your methodology is rather unscientific in the first place, but providing one of your images as a sample reference might help people to be able to advise...
Mylenium

How to set isolation level in EJB?

          How to set the isolation level(Container Manager or Bean Manager) in EJB. Thanks


For 5.1, look at:
          http://www.weblogic.com/docs51/classdocs/API_ejb/EJB_environment.html#107261
          7
          http://www.weblogic.com/docs51/classdocs/API_ejb/EJB_reference.html#1061916
          "marshalli" <[email protected]> wrote in message
          news:3a59546d$[email protected]..
          >
          > How to set the isolation level(Container Manager or Bean Manager) in EJB.
          Thanks
          >
          >

How to Set Input Levels with FirePod and GarageBand

Hello ....
I/ve got Garageband and my Firepod 8 channel interface working ... but I need some tips .. especially on the relationship of input levels between my Firepod and Garageband ....
When I am setting input levels for a recording ... where should the input level be on the track in Garageband? .... Is that volume setting only for playback and mixing? .... or is it for the input as well ...
Thank you ....

Where should the initial input levels be set? ... Would you use the loudest
part of the song to do this? ...
Yes, as loud as possible without lighting the FP's clip leds.
When I mix the final product ... and change the volumes on the different
tracks.. aren't you then changing the input levels?
No, you're changing the output levels.
can't you red line and overload the track?
Yes, that's why each track has a fader, so that you don't clip.
Is there a master ouput level indicator
Yes, right over the Master Volume slider.
I guess you can't just put each track as loud as you want ... correct?
As loud as you want without clipping.
I would strongly suggest doing some web searches on "Mixing and Mastering" to learn more about how to mix, there's a TON of info floating around the web.

SSIS How to set Tolerance levels via parameters

Hi all
I am after some help as pretty new to SSIS. I need to write some validation requirements on data which needs to be in SSIS.
What I want to achieve is setting Tolerance levels on two fields.
Field A has a tolerance lvl of 0%
Field B has a tolerance lvl of 200%
Both the fields will need to update a status field if the tolerance rule is broken
These will need to be parametized as well.
Thanks in advance

Sorry not enough information
From what you provided, it sounds like a simple update statement to me which can be called from an execute sql task.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Can't set sound levels at startup

Hi All,
I've gone through the ALSA sound guide on Arch in some detail. I have sound working on my computer.
However, it starts muted at 0% everytime I boot up... despite using alsamixer to set the levels and saving the config with alsactl store and adding alsa to my rc.conf daemons.
On boot up I see the ALSA sound levels marked as [DONE]
Any ideas what's going wrong?

Here's an alternative.

How to set permission levels per site collection

Hello,
A site collection would have 700 sites , with the same (new) permission levels. Is there a way (apart from programming) to copy these permission levels?
Thank you.
Christos

Hello,
Check this link
http://social.technet.microsoft.com/Forums/en-US/bdb82f15-6d9c-47b3-b511-f8e019347895/how-to-set-permissions-to-list-item-sharepoint-programmatically
Thanks!

How to set recording levels?

I am recording electric guitars using small amps and Shure 57s and 58s through an Alesis MultiMix 8 FW. I'm looking for advice on setting the levels between the gain and level controls on the mixer and the level controls in GB. Should I set GB levels high, (maxed), and control it with the mixer, or set the mixer just below clipping and adjust with GB. Any suggestions would be appreciated.

Settings --> Sounds

How to Set up Print As Image Registry Default.

This is a response to the archived post at:
martin hrubes, "How to customize printing by registry - print as image" #, 6 Nov 2007 2:28 am
I was trying to find out how to set the "Print As Image" advanced setting to be enabled by default. Here is what I discovered through trial and error.
1. The setting is stored per user and per printer. (i.e. it has to be set for each printer for each user.)
2. The registry setting is stored in the following key:
[HKEY_CURRENT_USER\Software\Adobe\Acrobat Reader\8.0\General\cPrintAsImage]
3. In this key, each printer has a separate binary value named s0, s1, s2, etc. The number increments by 1 for each printer added. If you open the value data, you will see it contains the name of the printer encoded in hex. (ex. hex coded for \\Server\Printer1)
My recomendation is to open a pdf file in reader, go to File -> Print ->Select Desired Printer -> Click "Advanced" Options -> Enable "Print As Image" -> Click OK - Click OK again. Repeat for each printer you want to
change.
**NOTE** If you don't click OK both times (i.e. cancel the print dialog), the change will not be saved. You have to actually print something to the printer. If you don't want to print something, make sure the printer is offline or not accessible (unplug the network, usb, parallel, serial cable) first. Once the printer has been changed, it will keep the setting until to you change it.
After you have set-up all of the desired printers, open RegEdit and navigate to the above key. Right click on it, and export it. Note the file name and location you are saving to. Close RegEdit. "Edit" (Right Click) the file just exported ("Opening" the file will just import it back into the registry.). Once opened, highlight and copy the registry key and all of the registry values. Paste the key and values at the end of the file. In one of the keys change "HKEY_CURRENT_USER\" to "HKEY_USERS\.DEFAULT\". Save and exit the file.
When imported this file will enable the "Print As Image" setting for the currently logged in user plus add the setting to the default users profile so any new users to the machine will have it enabled by default also. However, it will not add it to any other user profiles that already exist on the computer. To do this, either use a login script for domain computers or add the reg file to the "All Users Startup" folder.
It would be nice to have a setting in the deployment custimazation wizard to handle this, but for now we're stuck with enabling it the hard way.

Yes Spyla, please see this link http://www.404techsupport.com/2008/09/09/make-adobe-reader-and-adobe-acrobat-use-print-as- image-setting-by-default-2/comment-page-1/#comment-3112.
Allan, many thanks for your post, it certainly helped point me in the right direction. what I found though is that you do not need to tick the print as image box at any point during the setting up of this. All you need to do is add the registry key for whichever version of Adobe you are using for this to work. So basically. what you are saying for each instance of Adobe is regardless of whether or not the print as image is selected, the registry key is saying always print as image for the printer as specified by the hex code. I have found that for network printers, you have to include the full path i.e. \\<servername>\<printername> e.g \\testserver\printer1 and convert all of that to hex. With later versions (9 up over), they have allowed for the string name of the printer so that it is just plain text which also makes life easier.
What I do is apply this registry entry via Group Policy on a per room basis so that we only ever need to add one printer to the list. you could do this globally by adding all printers sequentially using s0, s1, s2 or t0, t1, t2 etc depending on which version you are using. The screenshot shows the registry key for 1 printer for Adobe Reader 8.
The value data is the binary code for the actual full printer name
This works a treat.
Hope this helps
Thanks

My pc sound level is very low on playback from dvd and most websites even though its at 100 percent

the playback level on dvd and most video streams is very low.(youtube seems ok)This is my second pavillion g7 w/ windows 7 .The first had a defective fan but the sound level was ok and there was a graphic eq section for sound control with other output options.I've yet to find that area on this pc in the month I,ve had it even though their identical computers.I,m at a loss for the cause of the problem.Headphones work fine but are annoying.

i use professional studio monitors to monitor the audio
the issue , is if i turn up the audio it will clip on premieres main output. so i cant turn it up any more.
the specific moment i took the screenshot the audio volume was at -18db, but even if it was up at 0db it would not even reach half volume on my computers main output
this is the case regardless of the nature of the audio, be it stock music, dialogue, or sound effects maybe there is a hidden master output that im unaware of

Linux FF34 - How to set sound levels to a lower default?

Similar Messages

Maybe you are looking for