Linux forms6i server: triggers won't fire

Hi there:
We are having significant problems w/ our Redhat 6 linux box as our forms server. (We're opting for apache 1.3 instead of OAS (for right now).) The linux box is running 6i w/ patch 1.
The form appears fine and interacts w/ key strokes and tabs, but absolutely no trigger will fire. No when-button-pressed, no post-query, no key-next-items -- not a thing. If I take the exact same .fmx (compiled on a w2k box) to an NT box running forms 6i server, it works correctly.
Interestingly enough, when a new client loads the f60cgi base page, it prompts the user to download jinitiator 1.1.7.31, but in order to run the form, the client must have 1.1.7.30 (otherwise nothing happens). Maybe there is some sort of synch problem?
We're also using a netscape client since IE shows no cursor, and tabs don't work.
Any help greatly appreciated.
Thanks,
Charlton

Sorry, folks. Forgot the obvious. Compiling on the destination architecture fixed the problems.

Similar Messages

Forms6i Server Configuration

I have installed the 9iAS on Windows NT 4.0 Server. After installing the Forms6i Server inside this 9iAS, there is some configuration settings required. The document just say to modify the virtual path with the web listener, but there is no detail information on what section of the Apache httpd.conf to be modified. Please advise how to modify the httpd.conf for this, thanks.
Example:
Please configure the following virtual path with your web listener: /dev60html for physical directory D:\ORACLE\806\tools\web60\html.
SK

Rohit,
I don't think that its a good idea to ask over a Database forum, commands about of an o/s. Anyways, for starting, read this manual from Sun about the basic commands and more too,
http://docs.sun.com/app/docs/doc/806-7612/othercommands-69543?a=view
In addition to this, read these articles, not for Sun but still will be helpful
http://www.oracle.com/technology/pub/articles/calish-find.html
http://www.oracle.com/technology/pub/articles/advanced-linux-commands/part2.html
http://www.oracle.com/technology/pub/articles/advanced-linux-commands/part1.html
HTH
Aman....

Why READ_IMAGE_FILE is not working in Linux Appln Server?

Hello!
I have a form with a new_form_instance Trigger I wrote the read_image_file trigger to read a GIF file in an image item.It works fine on windows XP(development machine).I copied the GIF file to the same location where my fmx files are there in Linux application server.I copied and compilied my fmb file in linux application server.No compilation error is there.But when I run form from Linux the form hangs and my read_image_file command is at new form instance Trigger.I have checked the case sensitivity of the file and the permission etc in Linux.In windows Development machine the form runs successfully.What could be the problem.Please help.......
Jayashree

Hi
Incase if you find any server related error like "FRM-92101" happening on READ_IMAGE_FILE functionality, try to change the image item format from TIFF to BMP/JFIF.
Otherwise if you changed any Jinitiator or JRE Version, sign again for all the JAR Files and restart your server.

Can't Install Solution Manager on Suse Linux Enterprise Server 10 - JAVA

Hello everyone!
I've been trying to complete the pre-requisites in order to install Solution Manager SR2 on Suse Linux Enterprise Server 10 x64 - SP1.
There's only one last condition that I haven't met, and it's the Java Runtime Environment version...
I checked the recommended note 867110 and it says that i need to have installed the J2SDK 1.4.2_08.
SLES10 includes the 1.4.2_13, so I had to uninstall it, and download the right version from Sun Microsystem's official webpage.
When I installed the version 1.4.2_08, i'm not able to run SAPINST because there's no Java Runtime Environment running on the server.
I started to investigate and I found in some forums [NOT EXPLICITLY] that there's no port for J2SDK 1.4.2_08 on x64 linux systems.
I can't believe this is true because SLES10 is recommended by SAP to install Solution Manager, so I hope somebody can help me on this.
My specific question is: Does anybody know if is true that J2SDK 1.4.2_08 is NOT COMPATIBLE with x64 Linux?
In case of being true, is there any way to be able to run SAPINST ? because if I enable the version SLES brings built in, i'm able to run the SAPINST but it detects that i'm not running version 1.4.2_08 and doesn't allow me to continue installation.
I hope somebody can help me soon...
Regards!

> SAPINST_JRE_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
>
> JAVA_HOME=/opt/IBMJava2-s390-142/jre/bin:$PATH
You downloaded the wrong version - the one you have is for Z-Linux(Linux running on the mainframe - not for x64).
You need to download the x86_64 (or AMD64) version.
Install the correct one and try on a new console:
export JAVA_HOME=/opt/IBMJava2-amd64-142
export PATH=$JAVA_HOME/bin:$PATH
Then execute
java -fullversion
and it should show the correct version.
Markus

Linux install server and solaris 10

Hi,
I am trying to learn Solaris as a student. I bought a SPARC (Netra T105 UltrasparcII) server on ebay which requires a network install as there is no cd-rom, or keyboard.
I only have a linux box (like I said, I'm a stingy student) to use as an install server, there is a few tutorials out there to try and do this, but none for Solaris 10. I have been hacking away at this for days, but cannot get it to install. I have the sparc server using RARP and then getting the /etc/bootparams file and downloading the boot files, but it does not get to locating the jumpstart files or the install files (I dont know if I can install from the terminal using the keyboard (without jumpstart) - I have not got that far yet).
I always get this, like it cannot find the install directory, I was wireshark on the linux boot server and see loads of NFS traffic after the TFTP download, but cannot seem to see what part it actually at. I have a detailed log at the bottom from putty. Any help greatly appreciated.Cheers
ERROR: bpgetfile unable to access network
/sbin/install-discovery: information: not found
Linux box setup:
/etc/bootparams
solaris root=192.168.2.10:/home/sunos/Solaris_10/Tools/Boot rootopts=rsize=32768 boottype=:in install=192.168.2.10:/home/sunos_install/Solaris_10/Product sysid_config=192.168.2.10:/home/sunos_install/jumpstart/sysidcfg install_config=192.168.2.10:/home/sunos_install/jumpstart/jumpstart.conf
TFTP setup from /tftpboot:
[root@robert tftpboot]# ll
total 232
lrwxrwxrwx 1 root root 8 Jun 10 13:55 C0A80214 -> inetboot
-rwxrwxrwx 1 root root 221280 Jun 10 13:47 inetboot
The Openboot can get ahold of the inetboot file and downloads and it and then loads it.
The following directories are exported through NFS
[root@robert sunos_install]# cat /etc/exports
#/home/nfs 192.168.2.0/24(ro,sync)
/home/sunos *(ro,no_root_squash)
/home/sunos_install *(ro,no_root_squash)
[root@robert tftpboot]# showmount -e localhost
Export list for localhost:
/home/sunos *
/home/sunos_install *
In /home/sunos, I have:
[root@robert sunos]# tree -L 2
|-- Solaris_10
| `-- Tools
|-- boot
| |-- hsfs.bootblock
| `-- sparc.miniroot
`-- lost+found
In /home/sunos_install, I have:
[root@robert sunos_install]# tree -L 2
|-- Solaris_10
| `-- Product
|-- jumpstart
| |-- jumpstart.conf
| `-- sysidcfg
`-- lost+found
[root@robert jumpstart]# cat jumpstart.conf
install_type initial_install
system_type server
partitioning explicit
filesys any 2000 /
filesys any 1500 swap
filesys any 1500 /var
filesys any 2000 /opt
geo N_America
cluster SUNWCreq
package SUNWgzip add
package SUNWless add
package SUNWman add
package SUNWbash add
package SUNWtcsh add
package SUNWzsh add
[root@robert jumpstart]# cat sysidcfg
system_locale=en_US
timezone=US/Pacific
terminal=xterms
name_service=NONE
timeserver=pool.ntp.org
security_policy=NONE
root_password=xxxx
network_interface=primary
{ hostname=js-test
ip_address=192.168.2.20
netmask=255.255.255.0
protocol_ipv6=yes}
Putty log file from console:
root server: 192.168.2.10 (192.168.2.10)
root directory: /home/sunos/Solaris_10/Tools/Boot
module /platform/sun4u/kernel/sparcv9/unix: text at [0x1000000, 0x10a096d] data at 0x1800000
module /platform/sun4u/kernel/sparcv9/genunix: text at [0x10a0970, 0x12615bf] data at 0x1867cc0
module /platform/sun4u/kernel/misc/sparcv9/platmod: text at [0x12615c0, 0x12615c7] data at 0x18bdf80
module /platform/sun4u/kernel/cpu/sparcv9/SUNW,UltraSPARC-IIi: text at [0x1261600, 0x126da07] data at 0x18be680
SunOS Release 5.10 Version Generic_139555-08 64-bit
Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
\|/Ethernet address = 8:0:20:c2:1b:b4
-Using default device instance data
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/mem = 1048576K (0x40000000)
avail mem = 846602240
root nexus = Netra t1 (UltraSPARC-IIi 440MHz)
pseudo0 at root
pseudo0 is /pseudo
scsi_vhci0 at root
scsi_vhci0 is /scsi_vhci
ramdisk0 at root
ramdisk0 is /ramdisk-root
root on /ramdisk-root:a fstype ufs
pseudo-device: dld0
dld0 is /pseudo/dld@0
pcipsy0 at root: UPA 0x1f 0x0
pcipsy0 is /pci@1f,0
PCI-device: pci@1,1, simba0
simba0 is /pci@1f,0/pci@1,1
SUNW,hme0 : PCI IO 2.0 (Rev Id = c1) Found
SUNW,hme0 : Local Ethernet address = 8:0:20:c2:1b:b4
PCI-device: network@1,1, hme0
hme0 is /pci@1f,0/pci@1,1/network@1,1
SUNW,hme1 : PCI IO 2.0 (Rev Id = c1) Found
SUNW,hme1 : Local Ethernet address = 8:0:20:c2:1b:b5
PCI-device: network@3,1, hme1
hme1 is /pci@1f,0/pci@1,1/network@3,1
PCI-device: ebus@1, ebus0
ebus0 is /pci@1f,0/pci@1,1/ebus@1
su0 at ebus0: offset 14,3803f8
su0 is /pci@1f,0/pci@1,1/ebus@1/su@14,3803f8
cpu0: UltraSPARC-IIi (portid 0 impl 0x12 ver 0x91 clock 440 MHz)
iscsi0 at root
iscsi0 is /iscsi
|pseudo-device: zfs0
zfs0 is /pseudo/zfs@0
Configuring devices.
/pseudo-device: devinfo0
devinfo0 is /pseudo/devinfo@0
PCI-device: pci@1, simba1
simba1 is /pci@1f,0/pci@1
pseudo-device: pseudo1
pseudo1 is /pseudo/zconsnex@1
/pci@1f,0/pci@1,1/network@1,1 (hme0) online
/pci@1f,0/pci@1,1/scsi@2 (glm0):
Rev. 3 Symbios 53c875 found.
PCI-device: scsi@2, glm0
glm0 is /pci@1f,0/pci@1,1/scsi@2
PCI-device: pci@1, pci_pci0
pci_pci0 is /pci@1f,0/pci@1/pci@1
su1 at ebus0: offset 14,3602f8
su1 is /pci@1f,0/pci@1,1/ebus@1/su@14,3602f8
ecpp0 at ebus0: offset 14,340278
ecpp0 is /pci@1f,0/pci@1,1/ebus@1/ecpp@14,340278
pseudo-device: fssnap0
fssnap0 is /pseudo/fssnap@0
pseudo-device: ramdisk1024
ramdisk1024 is /pseudo/ramdisk@1024
sd0 at glm0: target 1 lun 0
sd0 is /pci@1f,0/pci@1,1/scsi@2/sd@1,0
pseudo-device: winlock0
winlock0 is /pseudo/winlock@0
pseudo-device: llc10
llc10 is /pseudo/llc1@0
pseudo-device: lofi0
lofi0 is /pseudo/lofi@0
pseudo-device: fcp0
fcp0 is /pseudo/fcp@0
pseudo-device: fcsm0
fcsm0 is /pseudo/fcsm@0
pseudo-device: trapstat0
trapstat0 is /pseudo/trapstat@0
pseudo-device: pool0
pool0 is /pseudo/pool@0
pseudo-device: mem_cache0
mem_cache0 is /pseudo/mem_cache@0
pseudo-device: fcode0
fcode0 is /pseudo/fcode@0
-\i2c0 at ebus0: offset 14,600000
i2c1 at ebus0: offset 14,100000
i2cadc0 at i2c0: reg=0x0:0x9E, name=bus,address="0,9e"
i2cadc0 is /pci@1f,0/pci@1,1/ebus@1/i2c@14,600000/adc@0,9e
i2cgpio0 at i2c0: reg=0x0:0x70, name=bus,address="0,70"
i2cgpio0 is /pci@1f,0/pci@1,1/ebus@1/i2c@14,600000/gpio@0,70
i2cgpio1 at i2c0: reg=0x0:0x72, name=bus,address="0,72"
i2cgpio1 is /pci@1f,0/pci@1,1/ebus@1/i2c@14,600000/gpio@0,72
|/-\|/-\|/-Using RPC Bootparams for network configuration information.
Attempting to configure interface hme1...
\|/-\|/-WARNING: hme1: fault detected in device; service degraded
WARNING: hme1: No response from Ethernet network : Link down -- cable problem?
\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-Skipped interface hme1
Attempting to configure interface hme0...
Configured interface hme0
ERROR: bpgetfile unable to access network
/sbin/install-discovery: information: not found

rmcnaught48 wrote:
Hi,
I am trying to learn Solaris as a student. I bought a SPARC (Netra T105 UltrasparcII) server on ebay which requires a network install as there is no cd-rom, or keyboard.
I only have a linux box (like I said, I'm a stingy student) to use as an install server, there is a few tutorials out there to try and do this, but none for Solaris 10. I have been hacking away at this for days, but cannot get it to install. I have the sparc server using RARP and then getting the /etc/bootparams file and downloading the boot files, but it does not get to locating the jumpstart files or the install files (I dont know if I can install from the terminal using the keyboard (without jumpstart) - I have not got that far yet).You can install using the keyboard with jumpstart. Without jumpstart you'd need local media (you can't enter the OS via the keyboard).
I always get this, like it cannot find the install directory, I was wireshark on the linux boot server and see loads of NFS traffic after the TFTP download, but cannot seem to see what part it actually at. I have a detailed log at the bottom from putty. Any help greatly appreciated.Cheers
ERROR: bpgetfile unable to access network
/sbin/install-discovery: information: not foundHmm. That looks like the image file is corrupt. Can you pull the image from media again? Can you see if there's a /sbin/install-discovery file in the image (usually under Tools/Boot/root). I recall there used to be a problem with that file.
Linux box setup:
/etc/bootparams
solaris root=192.168.2.10:/home/sunos/Solaris_10/Tools/Boot rootopts=rsize=32768 boottype=:in install=192.168.2.10:/home/sunos_install/Solaris_10/Product sysid_config=192.168.2.10:/home/sunos_install/jumpstart/sysidcfg install_config=192.168.2.10:/home/sunos_install/jumpstart/jumpstart.confIf you just want an interactive install (prompt for configuration/settings), you don't need sysid_config or install_config. Those are for automated installations.
TFTP setup from /tftpboot:
[root@robert tftpboot]# ll
total 232
lrwxrwxrwx 1 root root 8 Jun 10 13:55 C0A80214 -> inetboot
-rwxrwxrwx 1 root root 221280 Jun 10 13:47 inetboot
The Openboot can get ahold of the inetboot file and downloads and it and then loads it.
The following directories are exported through NFS
[root@robert sunos_install]# cat /etc/exports
#/home/nfs 192.168.2.0/24(ro,sync)
/home/sunos *(ro,no_root_squash)
/home/sunos_install *(ro,no_root_squash)
[root@robert tftpboot]# showmount -e localhost
Export list for localhost:
/home/sunos *
/home/sunos_install *That looks pretty good.
You do have the option of running VMware on linux, and putting a Solaris 10 image on it, then using that VM as your boot server. But the problem you're displaying doesn't appear to be related to the linux server.
Darren

Installing Oracle 8.1.7 on Red Hat Linux Advanced Server 2.1

Hello,
how the subject says I'd like to install Oracle 8.1.7 on Red Hat Linux Advanced Server 2.1. Can anybody of you say me where to find a good HOWTO/Documentation?? It would be nice if you help me!
Konstantin

This install is not on a Pentium 4
I'm trying to install on pentium III
Memory 512Mo
Hard Disk 20 Go
Thanks again

How to install Oracle 10g on to Red Hat Linux 5 Server

I'm new to both Linux and Oracle. I've been working on an installion of Oracle 10g on a Red Hat Linux 5 Server for about 2 weeks. I've been doing a lot of reading about installing Oracle on a Linux environment. I finally got to the installation portion and the Oracle Installer displayed a message that I had to have Red Hat 4 or 4 Enterprise to continue.
How can Install Oracle 10g onto a Red Hat 5 Linux Server"? Is there an option that I can use to bypass the OS checking?
Thanks

Unfortunately there is no way to access metalink without a valid account. You could then just try to skip preinstall requisites with this clause:
./runInstaller -ignoreSysPrereqs
or this method:
Copy the oraparam.ini from the installation source install/oraparam.ini to /tmp directory.
Edit the file /tmp/oraparam.ini so this file reads:
After
[Certified Versions]
Linux=redhat-3,SuSE-9,redhat-4,UnitedLinux-1.0,asianux-1,asianux-2,redhat-5
also, make sure you have these packages installed:
# rpm -ivh gcc-c++-4.1.1-52.el5.i386.rpm gcc-4.1.1-52.el5.i386.rpm
libstdc++-devel-4.1.1-52.el5.i386.rpm glibc-devel-2.5-12.i386.rpm
glibc-headers-2.5-12.i386.rpm libgomp-4.1.1-52.el5.i386.rpm
libXp-1.0.0-8.i386.rpm compat-libstdc++-296-2.96-138.i386.rpm
compat-libstdc++-33-3.2.3-61.i386.rpm
~ Madrid.

File Receiver channel, Append issue on Linux FTP server

Hi,
I have a File_ReceiverChannel_FTP_Order that is using the File Content Conversion message protocol.
I have setup the adapter to use File Construction Mode Append
When I run this on a windows FTP server, it is working as designed.
But when Im trying to use our Linux FTP server the append function does not work.
My adapter does not append but it is overwriting the content of the file!
Does any one know what to do about this?

Hi
i think you need to change the protocol as the linux system understand the NFS .
Thanks
sudhir sharma

Read_image_file command does works on Linux application server

Hello!
I have a form with a new_form_instance Trigger I wrote the read_image_file trigger to read a GIF file in an image item.It works fine on windows XP(development machine).I copied the GIF file to the same location where my fmx files are there in Linux application server.I copied and compilied my fmb file in linux application server.No compilation error is there.But when I run form from Linux the form hangs and my read_image_file command is at new form instance Trigger.I have checked the case sensitivity of the file and the permission etc in Linux.In windows Development machine the form runs successfully.What could be the problem.Please help.......
Jayashree

For me, attempting the following:
  READ_IMAGE_FILE('bullet_ball_glass_blue.gif', 'GIF', 'IMAGE7');
gives this error:
  FRM-47109: Cannot locate image file bullet_ball_glass_blue.gif
Changing my command to:
  READ_IMAGE_FILE('bullet_ball_glass_blue.gif', 'URL', 'IMAGE7');
loads the image successfully.
If you truly are not getting an error message (mine appears in the status bar), then perhaps the file is being found, but the image format is not recognized or otherwise incompatible. Test this by loading one of the the images that load successfully into your iconic buttons. If that image loads successfully into your image item, fix the problem GIF image. (Recreate or open & resave with a graphics program, etc.)
If this does not appear to be the problem, the only things I can think of are for you to confirm that, in formsweb.cfg:
  1. The archive_jini entry includes your image JAR
  2. If imageBase=DocumentBase, change to imageBase=codebase
The second change may temporarily break your iconic buttons. This can be fixed by updating the buttons' Iconic Filename properties specifying only relative paths found within the JAR. Since my image is stored in the root of my JAR, no path need be specified. Had I placed my image in a subdirectory within my JAR, named images, my call would have to be changed to the following:
  READ_IMAGE_FILE('images/bullet_ball_glass_blue.gif', 'URL', 'IMAGE7');
I'm not sure whether any of these suggestions will help, but since I had no problems, I suspect it's simply a matter of differing configurations. The two items that I listed are the only two likely differences I could think of.
Eric Adamson
Lansing, Michigan

Problems compiling and running 9i forms on 10g Linux app server

Hi all,
we are about to move our 9i developed forms application from W2k 9ias RL2 to a 10g linux application server. It seems that we are having very much trouble with the fact that file names are case-sensitive under linux. Our forms are designer-generated and afterwards modified using forms developer under win2k. Therefore these forms have designer plls attached (OFG*.pll). In addition, we use a few custom plls and an object library (*.olb). We managed to compile our fmbs to fmx using f90genm.sh on linux, but getting FRM-40735 and ORA-06508 errors at runtime. FORMS90_PATH in default.env is correct.
We took one fmb to narrow things down. Steps we took on development machine:
- Rename all plls to a format of uppercase name and lowercase extension (e.g. OFGBSL.pll)
- Reattach plls to the form
After that
- Move fmb and plls to linux machine
- compile the fmb without errors
At runtime, we get a ORA-06508 in a trigger that calls CGFK$LKUP_QRY.EXTEND_WHERE. This procedure is located in OFGTEL.pll. OFGTEL.pll has OFGMES.pll attached. We tried to compile OFGTEL.pll, but getting errors due to the fact that table CG_REF_CODES is not present in our db (we don't use it).
Other plls like OFGBSL.pll and our custom pll work well (proved by debugging).
Can anybody give us some hints or step-by-step instructions on how to move our application to linux, especially how to make OFGTEL.pll usable?
Thanks in advance
Gerald Krieger

Here is a part of code from OFGTEL.pll
IF (curr_value IS NOT NULL) THEN
SELECT decode(RV_HIGH_VALUE, NULL, RV_LOW_VALUE, curr_value)
, RV_MEANING
INTO new_value
, P_MEANING
FROM CG_REF_CODES
WHERE ( (RV_HIGH_VALUE IS NULL AND
/* this will compare them as chars, as the */
/* abbreviation will most often be a char */
curr_value IN (RV_LOW_VALUE, RV_ABBREVIATION)) OR
(to_number(curr_value) BETWEEN
to_number(RV_LOW_VALUE) AND to_number(RV_HIGH_VALUE))
AND ROWNUM = 1
i think the unix .pll and Win .pll are not the same

Connect Win Server 2008 R2 AD to linux ldap server

I have the need to do the opposite of what I am finding most users doing. Instead of connecting a remote linux ldap client to a windows server 2008 Active Directory server I need to connect my windows server AD to my linux ldap server. Once this connection
has been established I need for a user to be able to log in to the windows server and have their home directory on the linux box be mounted and available for the user to access their home directory and files.
I have also heard there might need to be some changes done on the ldap schema on the linux server to satisfy the windows AD. Is this true?
Does anyone have any information on how to configure the windows server (2008 R2) to do this? I am under the gun, time-wise, to get this implemented and working correctly. Any help would be GREATLY appreciated.

Hello,
please ask in your Linux LDAP forums to get these details.
If you have an AD question then please ask it here.
This
posting is provided "AS IS" with no warranties or guarantees , and confers no rights.
Microsoft Student
Partner 2010 / 2011
Microsoft Certified Professional
Microsoft Certified Systems Administrator:
Security
Microsoft Certified Systems Engineer:
Security
Microsoft Certified Technology Specialist:
Windows Server 2008 Active Directory, Configuration
Microsoft Certified Technology Specialist:
Windows Server 2008 Network Infrastructure, Configuration
Microsoft Certified Technology Specialist:
Windows Server 2008 Applications Infrastructure, Configuration
Microsoft Certified Technology Specialist:
Windows 7, Configuring
Microsoft Certified IT Professional: Enterprise
Administrator
Microsoft Certified IT Professional: Server Administrator
Microsoft Certified Trainer

Install Oracle 10g on Suse Linux Enterprise Server 10

Will 10g install on Suse Linux Enterprise Server 10? If so, what setting do I need to change to get it to install?

Yes, it will install. Oracle supports it.Apparently they forgot to tell support. Certify still holds at SLES 9.
http://www.oracle.com/technology/support/metalink/index.html
It's possible to make it work. However, I usually watch http://www.novell.com/products/server/oracle/matrix.html for info.

Oracle 9.2.0.1 on Redhat Linux ADVANCED SERVER -PATCHES

HI
Can some one help me out,
is Oracle 9.2.0.1 on Redhat Linux ADVANCED SERVER , is having some patch
set to work on Developer2000,
if so,please let me know where in we get the same
tks
narayana rao

hi,
I am trying to install oracle 9i rel2 on red hat adv server 2.1
Installation and Linking looks fine and during configuration ,
the database configuration assistant fails with 'End of Communication channel'.
This makes the software not usable as we get the same error while trying to connect to the database too..
any ideas?Check the "Oracle Installation Errors" section at
http://www.puschitz.com/OracleOnLinux.shtml
In this section I explain what I did about the
"end-of-file on communication channel" error
on RH AS.
Any feedback on this problem and solution is appreciated.
Werner

I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.

I installed Oracle database 10g on SuSE Linux Enterprise Server 8 edition.
But this massage pop up when I used my browser first time before start database.
Actually when I clicks on yes to start database.
The web browser you are using is not optimized for this release of Oracle enterprise manager. It is recommended that you use one of the following:
* Microsoft Internet Explorer version 5.5, 6.0 or higher
* Netscape Navigator version 7 and higher
*Mozilla version 1.3.1 and higher
Dose any one know hoe to upgrade mozilla or install internet explorer 5.5, 6.0 or higher or SLES 8.
Regards,
D

You can download package for your distribution (for example) from http://www.mozilla.org or directly from SuSE ftp server ftp://ftp.suse.com/pub/suse/i386/9.1/suse/i586
IE for linux does not exist.

Unable to install j2sdk-1.4.2 in Redhat Enterprise Linux advanced server v3

When trying to extract j2sdk-1_4_2 on RedHat Enterprise Linux advanced server, I got the message
Do you agree to the above license terms? [yes or no]
tail: bash: No such file or directory
Unpacking...
Checksumming...
1
The download file appears to be corrupted. Please refer
to the Troubleshooting section of the Installation
Instructions on the download page for more information.
Please do not attempt to install this archive file.
The RHEL is with kernel 2.4.21-37. I got the same error message on extracting both binary code and the rpmfile.
Is it because of the command "tail +511 $0 > $outname" ? And any experienses on how to fix it?
Thanks in advance.

checksum have to be exactyly right. Downloading by IE causes often errors - use firefox in downloading and calculate checksum.

Linux forms6i server: triggers won't fire

Similar Messages

Maybe you are looking for