Linux Grid control and windows agents

Hi all,
I have a Linux based GC and want to communicate with agents on a windows server. Does this combination use SSH? how do you go about installing agents remotely in this configuration. Any help would be apreciated.
rgds
alan

It's possible to install agents remotely on Windows. See this metalink note:
How to Install/Configure Cygwin and 'ssh' Server on Windows for use with Grid Control Remote's Agent Deployment
Doc ID:389632.1
Werner

Similar Messages

  • Installing Grid Control and its agents in RAC

    Hi
    I have a RAC of 2 nodes in 10.2.0.5 . I need to install Grid Control in another server to manage the RAC.
    I have several questions....
    The agent and grid control to be install has to be in 10.2.0.5 as well ? or must be higher...
    I have to install the agent in all nodes of the RAC ? and after the grid control in another server ?
    Thanks

    WAIT...
    I was thinking same that Grid Installer will create the databasse or you can use the one if exists..
    but when I was reading a similar thread.. The Grid control installer has inside an Oracle Server ?
    someone mentioned that Grid Installer will not create repository database.
    It is better if you refer the document before make any further comments.

  • Grid Control on Windows 64bit

    Hi all,
    I very new on Grid Control because actual I only have one database to administrate so the Enterprise Manger is very fine.
    But in the future this will be expanded to 4 or 5 databases on different machines so I think the Grid Control will "help" me... Or I'm wrong?
    Now the thing is, that my company is using Windows 2003 R2 64bit as OS and the Databases will be 10.2.0.4 64bit.
    So now I'm on the Oracle Grid Control page and see, that Grid Control is not available for Windows in 64bit.
    So I think now, that I have to have an additional Windows 32bit Server for running Grid Control and the Agent’s as 64bit for Windows for the Databases.
    Or does someone have a different idea??
    Thanks for your help.
    Br
    Joerg

    Hi,
    thanks for your post.
    I have checked it on MetaLink and as you can see on the screenshot Windows x64 is not certified.
    So I think I have to run an additional Windows 2003 32bit.
    How ever... thanks.
    br
    Joerg

  • Downloading Linux Grid Control Agent and jdk

    Hi,
    Please let me know where can I download the following software.
    Linux Grid Control agent doanload 10_2_0_2_0
    jdk-6u21-linux-1586-rpm.bin
    oracleasmlib-2.0.2-1.i386.rpm
    Regards,
    VN

    This might help you.
    GC Agent: http://www.oracle.com/technetwork/oem/grid-control/downloads/agentsoft-090381.html
    Java: http://en.sourceforge.jp/projects/sfnet_crawlzilla/downloads/other/jdk-6u21-linux-i586-rpm.bin/
    ASMlib: http://www.oracle.com/technetwork/server-storage/linux/downloads/rhel5-084877.html this is 2.0.4.X, i don't think you 2.0.2.X is available now...
    btw, Please mark the thread as 'answered', if you feel you got your question answered. This will save the time of others who search for open questions to answer.
    Regards,
    CSM

  • How To Install/Configure OEM Grid Control On Windows

    Hi,
    I've downloaded OEM Grid Control for windows (32-bit) from oracle site.
    This .zip files has 3 more .zip files eg
    File Size
    3822442.zip 510 MB (535,208,588 bytes)
    3731596.zip 275 KB (282,502 bytes)
    3731593.zip 510 MB (535,047,905 bytes)
    Can you pls tell me which one is actual OEM Grid Control software, and what are the other .zip files ?
    Pls email me at [email protected]
    Your help greatly appretiated.
    Regards,

    You will be needing all three zip files. It will contain all files needed for installation of a repository Database Instance, the Management Server and an Management Agent.
    cheers
    Rob

  • 10gR2 Grid Control with previous Agents?

    I have 10gR2 Grid Control installed on a Linux Server. I want to use it to create a DataGuard standby database. The issue is that the primary database is 10gR2 on a HP-UX server using ASM and the standby database will also be 10gR2 on a HP-UX server using ASM. Will the 10gR2 Linux Grid Control be able to handle this since the agent on the primary will be 10.1.0.4? Note: 10gR2 is available for HP-UX but 10gR2 Grid Control is not yet available so that is why I have 10.1.0.4 agent.

    Yes , it is able to handle

  • Grid Control for windows

    Hi Experts,
    We're trying to download and install Oracle grid control for windows 64bit but we can't find any 64bit release!
    Can we safely download and install Enterprise Manager 11g Grid Control Release (11.1.0.1.0) - Windows 32bit from http://www.oracle.com/technetwork/oem/grid-control/downloads/index.html ? or should we be installing a different version??
    Should Grid control be installed on the DB server in the 1st place or should it be installed on another server?
    Current Oracle Software: 11.2.0.1 64bit.
    Server OS: Windows 2008 Server 64bit.
    Can you kindly let us know.
    Thanks

    We finally got our facts right..
    The Grid Control Enterprise Manager comes only in 32 bits.. However the Grid Control agent that needs to be installed on the DB server comes in 32/64bits and is supported under different OS platforms.
    Metalink (Doc ID 412431.1) shows the Oracle Enterprise Manager Grid Control Certification Checker/matrix that we found extremely useful.
    Enterprise Manager Grid Control comes with the basic features and is free to use. Any extra features are considered addons and do need to be properly licensed.
    Thanks

  • Installing Grid Control and managing DBs on desktop

    I want to install Grid Control, and manage DB on my own testing environment on desktops...I tried one time to install Grid Control on my desktop i become very slow. Now i am thinking to buy new Desktop dedicated for Grid Control only and see how it goes...any suggestions?
    2nd how i can access my DB on the other desktop? Like i should install agents on that...and how to configure....

    When teaching this class I typically have 6 pairs of students sharing a single P4 3Ghz with 4Gb of RAM gridserver. (combined 10.1.0.4 emrep with single OMS on RH 3 AS)
    THis is more than enough for the 150 or so targets that we configure during class
    The agents are deployed in any of several methods.(the install DVD is probabally the easiest for 1's and 2's) If you are monitoring a db expect to use about 150Mb of RAM for the agent. After setting up the agent ensure that your computer has local security policy configured so that "Login as Batch" is enabled for the user account that will be used for authentication to the desktop. (this also means that you need to have a windows password configured for that account as well).
    The database configuration is semi-automatic once you have the agent installed on the desktop (it's called discovery)

  • Figures in Grid Control and Enterprise Manager Console don't match!

    Hi,
    I have just installed Oracle 10g Grid Control and it is managing an existing database on another server. It appears to gather information as expected in most areas (I can look at the alert log through grid control and it is up to date to the nearest 60 seconds as I expect) but today I looked at how full my undo tablespace is and the figures seemed completely wrong. When looking through grid control it showed me that Undo was 20% full. When I looked in the old java console, it showed it was 30% full!
    Is there any reason why figures in Grid Control would not be accurate or up to date? I have no error messages and it seems to be gathering data fine.
    Is it more likely the old java console is not accurate? (I've always found it accurate in the past I think!).
    These are Solaris Sparc servers, Oracle 10.2.0.3 Grid Control monitoring an Oracle 10.2.0.3 database on a remote server via management agent.
    Thanks,
    Paula

    And this morning my old console says 21%, and the new Grid Control says 14%. So they both seem to be gathering the info and putting it out but they have completely different opinions on how much space is used. I think that makes the whole thing fairly useless. Not so glad I spent an age trying to get grid control set up now!!!
    Any thoughts much appreciated!!!!
    Thanks,
    Paula

  • Install of OEM 10g Grid controll on windows break my listener

    Hi!
    I install OEM 10g Grid controll to Windows 2000 server, successfully (a new database to the repository also was created by the installer).
    When I restart our server the service of the Listener did not started (it was set to automatic) and I did not able to start it.
    First I see the "Listener.log" and the trace file.
    The problem was that the listener intended to load adapter protokoll and refer to the "orantcp9.dll"!
    Because before the install I create a 10.1.0.2 database the path of the file point to the "Db_1\bin" and here is "orantcp10.dll" exists.
    The "orantcp9.dll" is exists in "em_1\bin".
    What and how can I fix?
    An additional question : during my secont installation I select to create the repository into an existing database, but the installer refuse it because my DB version was 10.1.0.2 and not 10.1.0.3.
    How can I create DB with 10.1.0.3 version on Windows?
    I am in a deadlock :-)
    Regards,
    Imre

    Try MetaLink Doc Id 284680.1
    The issue was that the EM Grid Control created an ORACLE_HOME environment variable. All you have to do is delete the variable, move the Database Oracle Home entries in the path to the front, and reboot the server.

  • GRID Control and management  hostname

    With a HA deployment you have to set :
    emd.properties:#AgentListenOnAllNICs=FALSE
    This is ok for me but the servers have 3 differents IP adresses (3 differents hostname), one is foucuss for management tasks and this is not the name registered by the Agent.
    Do you know if it is possible to run host scripts (external jobs) with Grid Control and to specify the hostname where these jobs have to run by default the jobs will run on the hostname registered by the Agent.

    Hello,
    There is currently no support for CEP in Grid Control.
    andy

  • Problem with remote control and Windows 7 - HP Pavilion 6301eu

    I installed Windows 7 32-bit and my remote control does not work. I have tried all possible drivers and still nothing ... Photo driver attached. Does anyone have a link to the current drivers for the remote control and Windows 7? thank you

    Hi John:
    Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
    There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
    I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
    Thanks for your help though and if you have any other ideas, I'm all ears.
    Mark

  • How to install oracle10g grid control on windows

    i want,
    how to install oracle10g R3 grid control on windows
    in my server ,i have 4 database ..oracle10g R2 ..is running...

    http://download.oracle.com/docs/cd/B16240_01/doc/nav/portal_booklist.htm

  • Oracle 10.2.0.3 Grid Control and ReNew the IP Address

    Hello
    I have installed Grid Control and added few hosts and was working fine. But I have changed the IP address of Grid Server host. I mean I have been given new IP address for Grid Control host.
    I have changes the ip address in /etc/hosts and reboot the server. But Grid Control Console page is not coming up on IE. Help Please...
    Regards
    Sindhi

    It has been sorted out. As Grid Control use FQDN and it do not use IP address. Just I changes the IP address and FQDN was same. I was forgot to change IP address from Terminal Server where I was accessing Grid Control Console using IE. Thanks for you both to response my query.

  • Install Grid Control and use repository within a DataGuard configuration

    Hello,
    I need some information if anyone has experience in the following
    We have severel database running in DataGuard standby configuration.
    I want to install OMS 11.1 and use the repository in a primary and standby configuration.
    My configuration will look like this:
    host 1     Primary Repository database
         OMS service 1
    host 2     Standby Repository database
         OMS service 2
    During normal operation i want to have 2 OMS services running.
    Whenever a failover is necessary, i want to active my standby database and run OMS service 2.
    Can this be a working configuration?
    Any help is appreciated.
    Regards,
    Ben

    Hi.
    As far as I know, the dbconsole installed with the Oracle database applies for only one database on one server. The information accessed by the dbconsole relies within the sysman schema inside the actual database. For a database environment with 10 databases, it is possible to install grid control and manage all these databases despite version and OS. And I think that grid is a good solution to such an environment.
    The grid installation itself is a application server installation, and I suggest if possible that you separate the rdbms server and the server that contains the grid control.
    The repository database the grid control uses can either be installed in the 10g environment or in the grid control environment (server). You can place the repository in a new database in a separate ORACLE_HOME from the actual grid control application server.
    Good luck.
    rgds
    Kjell Ove

Maybe you are looking for

  • Instnce name in non-RAC environment

    Hi! In non-RAC environment V$INSTANCE.INSTANCE_NAME does not actually displays the name of the instance,that was set in INSTANCE_NAME parameter. It always displays DB_NAME instead. Is it any way to get instance_name that has service user connected to

  • Icons were all stacked in one place on desktop

    I needed to re-start my Mac.  When I did, all of the desktop icons were stacked on top of each other, occupying only one space on the desktop.  Not being very useful that way, I had to create a new folder, move all of them into the folder and then mo

  • Deep structure - assign component

    hi, I have a structure like: data: begin of wa_xxx,         rec like bkpf,         iba(10) TYPE c,         bba(10) TYPE c,       END OF wa_xxx. Now I would like to assign the strucutre like: field-symbols: <fs_1> like wa_xxx loop.... assign component

  • Magsafe and iGo (or other third party adapter)

    I'm not sure if this is the right place to post this plea, and I'm guessing it isn't, since I can't believe nobody else has said this before: Please either produce a Magsafe auto/car/air adapter for the or license the technology to a company like iGo

  • Flashplayer 11.2 and Flex 3.6 - surely it is possible?

    Hi We would love to use the new right click functionality in Flash 11.2 - but adding the compiler argument "swf-version" is not available in SDK 3.6. Having tried upgrading the application to 4.6 SDK this accepts the swf-version" param - BUT the MX c