Linux guest does not get DHCP offer through a bridged internal switch, but Windows guests do (laptop).

I also got trouble getting networking to work on my laptop. It has one Gigabit LAN and one wireless network interface.
I cannot get my Linux guests, I tried CentOS 6.4, Ubuntu 13.10 and Debian 6, to get a DHCP offer from my DHCP server on my physical LAN. Manual configuration using static IP addresses works, but I need DHCP for my laptop.
I tried a Windows 8.1 Pro 64bit guest and the Windows Phone SDK 8.0 and both connected fine to the internet.
Here is what I tried:
With the ethernet cable disconnected I was connected to my wireless network or LAN with WPA2 personal authentication. On this physical LAN there was a DHCP server.
I created an internal Hyper-V switch and then I created a bridge between this switch and my wireless interface. I always used this switch as the single network connection for my VMs.
I am using Windows 8.1 Professional 64bit.
Why are only Linux guests affected and is there a solution? Thank you.

Hi faustbusserl,
"I cannot get my Linux guests, I tried CentOS 6.4, Ubuntu 13.10 and Debian 6, to get a DHCP offer from my DHCP server on my physical LAN. Manual configuration using static IP addresses works, but I need DHCP for my laptop."
Does it mean that you have created an external virtual switch for Linux guests and they can not get IP from DHCP ?
Did you try to use legacy network card for the linux VM to get IP from DHCP .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

My guests does not get internet access through my guest network

I have created a guest network on my time machine. The problem is that my guests don´t get internet access when they choose the network and type the password. I don´t understand why this is happening? My ordinary network is fully functional.

If you are using 7.6.3 firmware on the TC, the guest network does not actually work in bridge mode.. it looks like it does.. but nope, it doesn't.
Make sure the TC is the main router in the network.

SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012

Hi,
Please help me with the below issue, iam trying to deploy Service pack 1 on Windows 7 , 32 Bit OS
SP1 does not get installed when the machine is set to Japanese Language, software push through sccm 2012 , it does gets installed of installed manually, by remoting into the machine
also it gets installed through sccm when the machine is set to english language,
Thank you
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Hi Friends,
we are deploying the SP1 via SCCM 2012 , and the success rate is around 50 %, its a Light touch installation where user will initiate the installation via Software Center ( Web based )
i was able to gather few errors , and this are the errors which failed during SP1 Installation 0x800f0828,
some errors which sccm reports display are
11171
10008
10021-
17031 -
1602 - User Cancelled installation
113 - No more internal file identifiers available
10070 - File handle reference is no longer available
10050 - A socket operation encountered a dead network
11170 - The task sequence manager could not successfully complete execution of the task sequence
i could not find the reason for some of the errors, also i am looking for a fix/woraround if any
Also i have noticed that in few computers the task seq failed at a place where after the sp1 installation a reboot happens and then PGP BYPASS utility is uninstalled, it did not start the PGP bypass uninstall after reboot
is there a way to cut short the Task seq and keep it simple ?
right now its like this
1. checking for prerequisite : checks for OS Name and OS version
2. installs PGP Bootgaurd Bypass
3. System Restart
4. Installing Windows 7 Service Pack 1
5. Final Restart
6. uninstall PGP Bootgaurd Bypass
Regards
Tanoj
OSLM ENGINEER - SCCM 2007 & 2012

Clients not receiving DHCP IP address from HREAP centrally Switched Guest SSID

Hi All,
I am facing a problem in a newly deployed branch site where the Clients are not receiving DHCP IP address from a centrally switched Guest SSID. I see the client status is associated but the policy manager state is in DHCP_REQD.
The dhcp pool is configured on the controller itself. The local guest clients are able to get DHCP and all works fine, the issue is only with the clients in the remote site. The Hreap APs are in connected mode. Could you please suggest what could be the problem. Below is the out of the debug client.
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Adding mobile on LWAPP AP 3c:ce:73:6d:37:00(1)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Reassociation received from mobile on AP 3c:ce:73:6d:37:00
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Changing ACL 'Guest-ACL' (ACL ID 0) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Applying site-specific IPv6 override for station 10:40:f3:91:7e:24 - vapId 17, site 'APG-MONZA', interface 'vlan_81'
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Applying IPv6 Interface Policy for station 10:40:f3:91:7e:24 - vlan 81, interface id 13, interface 'vlan_81'
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 Applying site-specific override for station 10:40:f3:91:7e:24 - vapId 17, site 'APG-MONZA', interface 'vlan_81'
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Changing ACL 'none' (ACL ID 255) ===> 'none' (ACL ID 255) --- (caller apf_policy.c:1393)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 STA - rates (8): 140 18 152 36 176 72 96 108 0 0 0 0 0 0 0 0
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Initializing policy
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 START (0) Change state to AUTHCHECK (2) last state AUTHCHECK (2)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 AUTHCHECK (2) Change state to L2AUTHCOMPLETE (4) last state L2AUTHCOMPLETE (4)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 L2AUTHCOMPLETE (4) Plumbed mobile LWAPP rule on AP 3c:ce:73:6d:37:00 vapId 17 apVapId 1
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 0.0.0.0 L2AUTHCOMPLETE (4) Change state to DHCP_REQD (7) last state DHCP_REQD (7)
*apfMsConnTask_3: May 24 13:26:49.372: 10:40:f3:91:7e:24 apfMsAssoStateInc
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 apfPemAddUser2 (apf_policy.c:222) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Idle to Associated
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 Scheduling deletion of Mobile Station: (callerId: 49) in 28800 seconds
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 Sending Assoc Response to station on BSSID 3c:ce:73:6d:37:00 (status 0) ApVapId 1 Slot 1
*apfMsConnTask_3: May 24 13:26:49.373: 10:40:f3:91:7e:24 apfProcessAssocReq (apf_80211.c:4672) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Associated to Associated
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) State Update from Mobility-Incomplete to Mobility-Complete, mobility role=Local, client state=APF_MS_STATE_ASSOCIATED
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) pemAdvanceState2 4183, Adding TMP rule
*apfReceiveTask: May 24 11:35:53.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Adding Fast Path rule
type = Airespace AP - Learn IP address
on AP 3c:ce:73:6d:37:00, slot 1, interface = 13, QOS = 3
ACL Id = 255, Jumbo F
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Fast Path rule (contd...) 802.1P = 0, DSCP = 0, TokenID = 7006 IPv6 Vlan = 81, IPv6 intf id = 13
*apfReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Successfully plumbed mobile rule (ACL ID 255)
*pemReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
*pemReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 Sent an XID frame
*apfMsConnTask_3: May 24 13:26:49.401: 10:40:f3:91:7e:24 Updating AID for REAP AP Client 3c:ce:73:6d:37:00 - AID ===> 1
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) DHCP Policy timeout
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Pem timed out, Try to delete client in 10 secs.
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 Scheduling deletion of Mobile Station: (callerId: 12) in 10 seconds
*osapiBsnTimer: May 24 13:28:59.315: 10:40:f3:91:7e:24 apfMsExpireCallback (apf_ms.c:599) Expiring Mobile!
*apfReceiveTask: May 24 13:28:59.315: 10:40:f3:91:7e:24 apfMsExpireMobileStation (apf_ms.c:4897) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Associated to Disassociated
*apfReceiveTask: May 24 13:28:59.315: 10:40:f3:91:7e:24 Scheduling deletion of Mobile Station: (callerId: 45) in 10 seconds
*osapiBsnTimer: May 24 13:29:09.315: 10:40:f3:91:7e:24 apfMsExpireCallback (apf_ms.c:599) Expiring Mobile!
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 Sent Deauthenticate to mobile on BSSID 3c:ce:73:6d:37:00 slot 1(caller apf_ms.c:4981)
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 apfMsAssoStateDec
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 apfMsExpireMobileStation (apf_ms.c:5018) Changing state for mobile 10:40:f3:91:7e:24 on AP 3c:ce:73:6d:37:00 from Disassociated to Idle
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Deleted mobile LWAPP rule on AP [3c:ce:73:6d:37:00]
*apfReceiveTask: May 24 13:29:09.316: 10:40:f3:91:7e:24 Deleting mobile on AP 3c:ce:73:6d:37:00(1)
*pemReceiveTask: May 24 13:29:09.317: 10:40:f3:91:7e:24 0.0.0.0 Removed NPU entry.

#does the client at the remote site roams between AP that connects to different WLC?
#type 9 is not good.
*pemReceiveTask: May 24 13:26:49.373: 10:40:f3:91:7e:24 0.0.0.0 Added NPU entry of type 9, dtlFlags 0x0
#Does your dhcp server getting hits.
#Also, get debug dhcp message & packet.
#Dhcp server is not responding.
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) DHCP Policy timeout
*apfReceiveTask: May 24 13:28:49.315: 10:40:f3:91:7e:24 0.0.0.0 DHCP_REQD (7) Pem timed out, Try to delete client in 10 secs.

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the o

When trying to PDF a webpage into a PDF, it does not work, I go through all the steps as normal, and It does nothing. I can repeat my action, where instead of "printing" to adobe, it saves the file, which it doesn't save it at all. I can't even find the original in my work folder. I need to know how to stop this from happeing and get it back to the way it has been working he last 6 months since i purchased this program.

Hi pissedadobeuser,
Does this issue occur with any particular web page?
Are you able to print the webpage to 'Adobe PDF' to convert it to pdf.
Which Browser version, OS version and Acrobat version are you using?
Regards,
Rave

JAR file does not get uploaded to client for my SERVLET generated APPLET

Some help please...
I have a servlet that generates the HTML code that contains an APPLET. This APPLET needs a JAR file that is listed under its ARCHIVE property. The SERVLET is in a JAR file that is in the same directory as the other needed JAR file. If I create a static HTML with the output of the SERVLET it works fine. But if go through Weblogic the needed JAR file does not get uploaded to the client so I get a java.lang.NoClassDefFoundError:and my APPLET does not load.
Q1: I am not sure what to put under the CODEBASE tag. I tried "." and I also tried "http://mymachine" but both did not work. I also tried without the CODEBASE tag. No luck. The SERVLET is bound to http://mymachine/servlet.
Q2: Does anyone have any suggestions on how to do this? Is there a way to force the browser to upload a certain JAR file?
Thanks...

It works!!
This is what I did:
The jar file in question was the weblogic.jar. I tried putting it under the lib directory of my war file but I had problems because the weblogic.jar contains other war files inside so when I tried to deploy my war file it also tried to deploy the inner war files which for some reason did not work. So I tried removing the war files from the weblogic.jar and this time I had no problems deploying my war file but I still could not find the classes I needed. So I tried moving the weblogic.jar to the root dir of my war file and it worked!! Now the trick here was: I did not set the CODEBASE AND I had the ARCHIVE paramenter set in TWO places like below:
<APPLET CODE = "marketmap.client.MarketMapApplet"
ARCHIVE = "weblogic.jar"
WIDTH = "657"
HEIGHT = "382"
ALIGN = "BOTTOM"
ALT = "APPLET tag not recognized">
</XMP>
<PARAM NAME = CODE VALUE = "MyApplet" >
<PARAM NAME = "type" VALUE="application/x-java-applet;version=1.2.2">
<PARAM NAME = "scriptable" VALUE="false">
<PARAM NAME = ARCHIVE VALUE="weblogic.jar">
</APPLET>
Actually if you do not place a parameter named ARCHIVE (at the end) it wil NOT work. I tried with multiple jar files listed and it works great too.
Anyway I figure I'd share. Thanks for the help too.
Lastly for people who choose not to upload the jar files to clients, you should look at the bea documentation on applets. It lists a classpath servlet that allows you to provide classes to the clients without having to force them to download the jar file.

SA520W does not get IP on optional WAN

We are using a SA520W as our primary router and have a fiber connection attached to the default WAN interface. We would like to improve our uptime using a secondary internet connection on the optional WAN interface.
We have bought a dovado tiny 4g router for this other connection. It acts as a dhcp server but the Cisco router does not get an IP from the dovado router. The router works as expected when connected to a normal computer. But somehow the cisco router doesnt get an IP.
I have also tried to set a static IP for the Cisco router but that didn't help either. The dovado router is setup do deliver ip in the range 192.168.0.2-254
Link is up but WAN state is Down. Any ideas?

Hello Christian,
What is the port configuration settings, set to 10/100/1000 Half or Full. If Auto try manually changing. Also you can try to clone the mac address, or set the mdi/mdix settings on the G4 router if possible.
Cisco Small Business Support Center
Randy Manthey
CCNA, CCNA - Security

Main speaker stopped working. Phone does not ring, sound only through earpiece/headphone. What to do?

main speaker stopped working. Phone does not ring, sound only through earpiece/headphone. What to do?

I spoke to the reseller today and they aggred to exchanged it. They didn't elaborate on the actual cause but thought that it had to be a hardware issue.
It could either be the issue that Euvix suggested or it could be as simple as the outer speaker is simply not working.
Anesi, did you use the phone before the upgrade? Looking at what you've written I take you didn't so I would go back and get it exchanged.

User defined fields does not get added into database

Hello Experts
                          User defined fields does not get added into database , when i click add button it
shows data added sucessfully , but when i check data base no entry is made , only entry is made for
B1 fields , like DocEntry ,DocNum etc.., no entry is made for U_fields..
I have check every thing databound is also set to true
Actually first few 6 data was added properly but now its not geeting added for user fields
I have used 2 document row child table for 2 matrix and for remaining Document table
What might be the problem
reply soon
plz suggest

Hello sir
I have checked Default form , in that entry is made into database
but running the form in screen painter in preview mode or through coding it does not get added for user field
this id my binding code
LoadFromXML("updateopd.srf")
            oForm = SBO_Application.Forms.Item("updopd")
            oForm.DataBrowser.BrowseBy = "txtpatid"
            'Adding combo in Obervation
            oItem = oForm.Items.Item("txtpatid")
            oEdit2 = oItem.Specific()
            oEdit2.DataBind.SetBound(True, "@UPDATE", "U_PID")
            oItem = oForm.Items.Item("txtmnane")
            oEdit3 = oItem.Specific()
            oEdit3.DataBind.SetBound(True, "@UPDATE", "U_FName")
            oItem = oForm.Items.Item("txtlname")
            oEdit3 = oItem.Specific()
            oEdit3.DataBind.SetBound(True, "@UPDATE", "U_LName")
Plz suggest

[svn] 3130: Fix SDK-16700: Applying a matrix to a GraphicElement does not get applied immediately.

Revision: 3130
Author: [email protected]
Date: 2008-09-05 15:32:13 -0700 (Fri, 05 Sep 2008)
Log Message:
Fix SDK-16700: Applying a matrix to a GraphicElement does not get applied immediately.
Added explicit matrixChanged and displayObjectChanged flags to GraphicElement so we can reliably track changes to those items. Changed commitXY() to set the x and y properties directly on the display object rather than indirectly through the matrix. Setting through the matrix caused any non-rotation or scale transform to be lost.
Reviewer: Deepa
Checkintests: pass
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-16700
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/GraphicElement .as

:/ - I just said I can't post this on the business forum as I have tried, it it says my post doesn't conform to the rules, yet there isn't anywhere where it breaks them. I will already be in talks with a lawyer but I was wondering if a more amicable solution could be reached first

My macbook air is not getting internet connection through our home wifi It was working fine yesterday until I took the Air out of the house and used it on another wifi connection.

My macbook air is not getting internet connection through our home wifi. It was working fine yesterday until I took the Air out of the house and used it on another wifi connection. One question is how to delete some of the networks that I don't use. Would too many networks cause the internet connection to fail?
Thanks.

Would too many networks cause the internet connection to fail?
It shouldn't but sometimes deleting the list of networks actually does solve the problem you are describing. Have you turned WiFi off and then back on on the computer?

Ordered Quantity does not get copied to Invoice by DIAPI

Hi All,
I am stuck with an issue in Invoice creation using DI API by code.The field Ordered Qty (DB Filed INV1.OrderedQty) does not gets copied to Invoice line from delivery lines. But while we add invoice from delivery >Copy To> AR Invoice , it gets copied to Invoice lines. This OrderedQty field is not exposed through DI API, so we cant set that field throgh code. What I do in Invoice creation code is as follows.
SAPbobsCOM.Documents oINV;
                    oINV = (SAPbobsCOM.Documents)
                        modups.oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oInvoices);
                    oINV.CardCode = oDLN.CardCode;
                    for (int i = 0; i < oDLN.Lines.Count; i++)
                        oDLN.Lines.SetCurrentLine(i);
                        string str = oDLN.Lines.ItemCode;
                        if (i != 0)
                            oINV.Lines.Add();
                        //oINV.Lines.ItemCode = oDLN.Lines.ItemCode;
                        //oINV.Lines.Quantity = oDLN.Lines.Quantity;
                        oINV.Lines.BaseType = Convert.ToInt32(SAPbobsCOM.BoObjectTypes.oDeliveryNotes);
                        oINV.Lines.BaseEntry = oDLN.DocEntry;
                        oINV.Lines.BaseLine = oDLN.Lines.LineNum;
                        taxcode = oDLN.Lines.TaxCode;
if (DeliveryExpenseCount > 0)
                            for (int i = 0; i < DeliveryExpenseCount; i++)
                                oDLN.Expenses.SetCurrentLine(i);
                                if (i != 0)
                                    oINV.Expenses.Add();
                                //oINV.Expenses.ExpenseCode=i;
                                oINV.Expenses.ExpenseCode = oDLN.Expenses.ExpenseCode;
                                oINV.Expenses.LineTotal = oDLN.Expenses.LineTotal;
                                oINV.Expenses.TaxCode = oDLN.Expenses.TaxCode;
                                oINV.Expenses.BaseDocEntry = oDLN.DocEntry;
                                oINV.Expenses.BaseDocLine = oDLN.Expenses.LineNum;
                                oINV.Expenses.BaseDocType = 15;
int retVal = oINV.Add();
                    if (retVal != 0)
                        int lErrCode; string sErrCode;
                        modups.oCompany.GetLastError(out lErrCode, out sErrCode);
Any help will be appreciated..
Deepesh

Hi Gordon,
Thank you for your reply.But it didnt fix the problem.The only change of previous code with this one was oINV.Lines.Add() method is called in the last of the loop.But it wont fix issue.
Updated on 20/10/2011
I have found the issue.The issue is causing if we update the resulting invoice's expense lines.
If we copy the expense lines from delivery and update any line with an amount it works fine and resulting invoice has "Ordered Qty" in its lines. Code is
for (int i = 0; i < DeliveryExpenseCount; i++)
                    oDoc.Expenses.SetCurrentLine(i);
                    if (i != 0)
                        oINV.Expenses.Add();
                    string s = oDoc.Expenses.TaxCode;
                    oINV.Expenses.TaxCode = oDoc.Expenses.TaxCode;
                    oINV.Expenses.BaseDocEntry = oDoc.DocEntry;
                    oINV.Expenses.BaseDocLine = oDoc.Expenses.LineNum;
                    oINV.Expenses.BaseDocType = 15;
                    oINV.Expenses.LineTotal = oDoc.Expenses.LineTotal;
                    if (radioButton2.Checked == true && i == 0)
                        oINV.Expenses.LineTotal = oDoc.Expenses.LineTotal + Convert.ToDouble(txtExp.Text);
But if the delivery has no expense lines or we are adding a new expense line to the invoice while invoice creation from delivery , the resulting invoice does not have "Ordered Qty " in its lines..
Code is
if (DeliveryExpenseCount > 0)
                        oINV.Expenses.Add();
                    oINV.Expenses.ExpenseCode = 1;
                    oINV.Expenses.TaxCode = taxcode;
                    oINV.Expenses.LineTotal = Convert.ToDouble(txtExp.Text);
If I try to add lines
oINV.Expenses.BaseDocEntry = oDoc.DocEntry;
oINV.Expenses.BaseDocType = 15;
to the above code it may show either "Internal error" or " No matching records found".
Is this a bug in DI API?

Dbacockpit overview pane does not get populated

Hi guys,
I have already gone through the several other threads on sdn which repeat the same issue here but I am not able to find a solution via them. Can any one give me some leads into this...
-- CHANGES DONE --
We applied all relevant support packs which were part of Support stack 13. This involved also patching SAP BASIS from 10 to 13. Also NW04S 700 kernel was upgraded to patch 114 (SAPEXE and SAPEXEDB SAR packages)
STATEMENT OF PROBLEM(S)
Tcode dbacockpit does not refresh data in the overview pane.
note: db02old still works and we are able to refresh stats from there but dbacockpit overiew pane does not get populated.
Also post support packs: sap_collector_for_performance runs successfully but reports in job log database system is not supported
When we do a refresh via dbacockpit, the job refresh space statistics ends with a compute bcd overflow dump.
CHECKS ALREADY MADE
--Note 1066044 for the BCD overflow dump does not help. We are already at BASIS pack 13 and the correction contained in the note is already in place. As
per the note since are already at BASIS SP13 we should not be facing this. Why are we facing this then ?
--Note 868063
Call report rsoracup; put in con_name=DEFAULT; operatio=CREATE;F8 did this.
--Note 1002840.(checks done as per note)
a) Check if SAP_Collector_for_perfmonitor is scheduled hourly
It completes successfully but gives job log below
1/16/2007 12:06:14 Job started
1/16/2007 12:06:14 Step 001 started (program RSCOLL00, variant , user ID DDIC)
1/16/2007 12:06:14 Clean_Plan:Cleanup of DB13 Plannings
1/16/2007 12:06:14 Clean_Plan:started by RSDBPREV on server
1/16/2007 12:06:14 Clean_Plan:Cleaning up jobs of system xxx
1/16/2007 12:06:14 Clean_Plan:finished
1/16/2007 12:06:15 Database system not supported
1/16/2007 12:06:17 Job finished
Why ?? (we got oracle 10.2.0.2)
b) se16 -> table TCOLL. Check if entery RSORACOL exists.
It does exist as below
RNAME RSORACOL
RENUM 1
SYTYP S
ALTSY
DAYOW XXXXXXX
TIMOD XXXXXXXXXXXXXXXXXXXXXXXX
c)SE16 -> table ORA_MON_DBCON. Check for enrry con name: DEFAULT.
It does exist as below
CON NAME DEFAULT
STATUS A
MAX RUNTIME 1,800
MAX UPLOAD 1,000,000
LOG LIFE 100
DESCRIPTION Local database. R/3 system available.
d)se16 -> table db02_coll_plan. Check if all the entries have status A and there are 64 entries. This is ok
--Note 1042725
SE16-> PROGDIR for Name= 'LSDBORA3F03'; Set field EDTX to blank
All entries have EDTX blank but there is no entry 'LSDBORA3F03
Despite all the above checks I am unable to get the dbacockpit to refresh. Does anyone have any ideas. Will putting in the latest DBSL shared library patch for oracle solve this... I did SAPEXE and EXEDB.SAR latest. Any ideas...?
Cheers, Vikram
[email protected]

For this issue it's still not working for me in Sanbox BI. I got a SAP message open for this. But I got it to work on Dev and TST systems. There was one mistake I was making. This may not be the cause though but just for your info. When we go to dbacockpit, click on collector setup icon. And there when we give connection name = "default" and then action as "create connection", I was not saving the variant. Click save and give a name to the variant like "refresh stats" or something. Then click refresh icon so that the "Refresh space statistics" will run in background. When I saved the variant on dev and test BI I did not end with a BCD overflow dump for the "refresh space statistics" job.The refresh space stat job needs to find the variant name.And this then populated the dbacockpit -> space -> overview pane. Although the "perf for monitor" job still has log entries "db system not supported" that doesn't matter. It's probably a message we can ignore.
Also if you are still facing prob, check these.
You say you are on SP12 which SP component are you referring to (stack number ?. BASIS ? BW ?). Make note I have done the support stack 13 which contains upto the BW patch upto 15 and upto BASIS patch 13. Note 1066044 says if you have BASIS 13 you won't face this problem .
Is your "perf for collector" job running without issues. That is a prereq to the "Refresh space stats" job. Try to troubleshoot that as well. I think the refresh stats job has to find the data in table MONI which gets populated via "perf for collector" (RSCOLL00).
regards, Vikram

G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11

Hi,
G/L Account mentioned on line level does not get hit in Journal entry on GRPO and AP Invoice in SAP B1 9.0 PL - 11
I am creating an independent AP Invoice, there are two issues:
1. On line level G/L Account field is not open for selection
2. I have then selected and updated the account on Form Settings. Same account gets updated on line level.
In Journal Entry selected G/L account on line level shall be hitted. But it does not put any effect on JE. Accounting is set by Warehouse. It picks up accounts from warehouse only.
Need help its urgent.
Thanks in advance.

Invoice is Item Type.
G/L Accounts are set by Warehouse. But if explicitly we are want to change the account on line level in that case, it is not getting reflected in Journal entry. On AR Invoice same scenario works perfectly. On line level I can change the accounts explicitly and have the effect on Journal entries.
Issue seems to be on AP side only.
As required please find attached the screen shots.
JEwith mapped GL Account on Warehouse
JEwith different GL Account on line Level via Form Settings
Thanks & Regards
Sonil

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases?

I am part of a family sharing setup. Can I have my own payment method so the organizer does not get charged for my purchases? If so, how do I set this up?

Yes. Just redeem gift cards so that your own account always has a sufficient credit balance. Here is how it works:
Family purchases and payments
After you set up your family, any time a family member initiates a new purchase it will be billed directly to your account unless that family member has gift or store credit. First, their store credit will be used to pay the partial or total bill. The remainder will bill to the family organizer's card.

Linux guest does not get DHCP offer through a bridged internal switch, but Windows guests do (laptop).

Similar Messages

Maybe you are looking for