Linux Install Error
I have downloaded web centre for linux and have attempted to install using a 10.2.x database for the content.
The operating system was checked against the requirements (and it also had a 10gAS 10.1.2 installation.)
Upon executing the web centre framework installation assistant, the opmn fails to start. The error indicates the port 6200 is in use. Executing netstat -a displays lots of sockets in a WAIT state. There were no other Oracle process running before install and the port was definitely free before running the OUI.
Has anyone seen this ?
Thanks,
Ben
Hi Mick,
I did attempt changing the localport setting (and restarting opmn), but I did not restart the database listener. I'll give it another go and let you know how it gets on.
Cheers,
Ben
Similar Messages
-
SUN Java WebServer on Linux install error
Hi All
I am trying to install SUN JavaWebServer 6.1 SP2 on linux.
My environment is
Red Hat Enterprise Linux ES release 3 (Taroon Update 6)
Kernel 2.4.21-37.ELsmp on an i686
I am logged in as root.
I got the software sun-webserver61-rh72[1].tar.gz from sun site, after extracting when run using
./setup
After I pass through
1. accepting license
2.express install option,
3. /opt/SUNWwbsvr as location
4.install all components [1. Sun ONE Web Server, Enterprise Edition (2)] screens
I get thie error
ERROR: AdminSysUser not specified in install cache [tmp/fileACNAs8]
ERROR. Failure installing Server Core. Do you want to continue [n]?
and the installer terminates.
Can someone plese tell me the problem here.
Regards
bibI could install it in a different machine (linux). However on the machine it failed, it never asked me to enter the user name. Where do I enter it.
On the machine where I was succesfull, i was prompted to enter admin user name.
Thanks
bib -
How to get past Crystal Reports Server 2008 Linux install error
Hi,
During the install of Crystal Reports Server 2008 on Red Hat Linux we select use an existing DB (Oracle) and it prompts for:
Crystal Reports Server 2008 Setup
Enter the information for your new CMS
Oracle TNSNAME :
[SANDBOX ] *
User ID :
[crystal_rpt ] *
Password :
which then gives me:
Crystal Reports Server 2008 Setup
ERROR
Failure to validate the database credential has a potential to crash the database at a later stage. Enter the correct information.
It doesn't let me get past this and just send me back to the previous screen. I've check and re-checked and the information TNSNAME, User ID, and Password are all correct. Now I can exit out the install and sqlplus to the database just fine with all that same information.
What does this error mean? And how do I get past it?
Thanks,
~JetHi Jet,
I've go the same problem. Have you solved this problem?
Regards,
Aldo -
Debian Gnu/Linux install error
One of our customer does have AIR installed, but gets the following when she double-clicks on our .air file:
----------------------------8<-----------------------------
Failed to open file "YNAB3_Live_3.5.1.1.air".
Failed to execute child process "/usr/bin/Adobe" (No such file or directory).
----------------------------8<-----------------------------
Can you offer any insight as to why the association with .air files might be messed up? Any way around it? Does this look familiar? Any advice would be greatly appreciated by me and of course her!
Many thanks,
TaylorOnly canonical paid the $$Microsoft fee so Ubuntu 12.04.4 64 bit and later will boot.
Other linux versions are locked out via secure boot. -
While installing ECC6.0 SR3 FOR LINUX an error occured
Hi all,
While installing ECC6.0 SR3 FOR LINUX an error occured. Error Details:
ERROR 2008-10-12 20:38:59.866
FCO-00011 The step createSecureStore with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR .WARNING 2008-10-13 18:17:26.006
Execution of the command "/opt/IBMJava2-amd64-142/bin/java -classpath /tmp/sapinst_instdir/ERP/SYSTEM/DB6/CENTRAL/AS/install/sharedlib/launcher.jar -Xmx256m com.sap.engine.offline.OfflineToolStart com.sap.security.core.server.secstorefs.SecStoreFS /tmp/sapinst_instdir/ERP/SYSTEM/DB6/CENTRAL/AS/install/lib:/tmp/sapinst_instdir/ERP/SYSTEM/DB6/CENTRAL/AS/install/sharedlib/exception.jar:/tmp/sapinst_instdir/ERP/SYSTEM/DB6/CENTRAL/AS/install/sharedlib/logging.jar:/tmp/sapinst_instdir/ERP/SYSTEM/DB6/CENTRAL/AS/install/sharedlib/tc_sec_secstorefs.jar create -s C31 -f /sapmnt/C31/global/security/data/SecStore.properties -k /sapmnt/C31/global/security/data/SecStore.key -enc -p XXXXXX" finished with return code 1. Output:
The java class is not found: com.sap.engine.offline.OfflineToolStart
ERROR 2008-10-13 18:17:26.011
CJS-30050 Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log:
The java class is not found: com.sap.engine.offline.OfflineToolStart.
ERROR 2008-10-13 18:17:26.235
FCO-00011 The step createSecureStore with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_SecureStore|ind|ind|ind|ind|8|0|createSecureStore was executed with status ERROR ( Last error reported by the step :Cannot create the secure store. SOLUTION: See output of log file SecureStoreCreate.log:
The java class is not found: com.sap.engine.offline.OfflineToolStart.). -
Oracle enterprise Linux and 10gR2 instalation error
I have installed Oracle Unbreakable Linux (from 4 CD's).
When tried to install Oracle 10gR2 I got error that displays when it's 83 % already installing:
Error in invoking target 'client_sharedlib' of makefile '/u01/app/oracle/oracle/product/10.2.0/db_1/network/lib/ins_net_client.mk
I have installed developement pack (aditional rpm packages installed), but I don't know what's happening.
I read on other forum (Error installing Oracle Client on Red Hat 4.0 that I might miss some package.
My system is fully 32 bit, so I think I do not need any 64 bit package, like suggested in that thread!?
Second question:
I thought that "Unbreakable Linux from Oracle" has all additional packages prepared for Oracle installation ...at least for current release 10gR2?
Is that true?
Third one:
If I use croatian keyboard, I cannot type "_" (underscore sign. How to have that (for me very important key)?
Thanks...
Message was edited by:
Funkymake.log:
(if [ "compile" = "binary" ] ; then \
/oracle/10g/bin/gennfgt > nnfgt.c ;\
TARGET_BINARY_INTERFACE= ;\
export TARGET_BINARY_INTERFACE ;\
gcc -c nnfgt.c ;\
-rm -f /oracle/10g/lib/nnfgt.o ;\
-mv nnfgt.o /oracle/10g/lib/ ;\
/usr/bin/ar rv /oracle/10g/lib/libn10.a /oracle/10g/lib/nnfgt.o ; fi)
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/oracle/10g//oracle/10g/bin/genclntsh
/oracle/10g/rdbms/lib/kpudfo.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
/usr/bin/make -f ins_net_client.mk client_sharedlib ORACLE_HOME=/oracle/10g//oracle/10g/bin/genclntsh
/oracle/10g/rdbms/lib/kpudfo.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
install.log:
INFO: /oracle/10g/bin/genclntsh
INFO: /oracle/10g/rdbms/lib/kpudfo.o: file not recognized: File format not recognized
collect2: ld returned 1 exit status
INFO: genclntsh: Failed to link libclntsh.so.10.1
make: *** [client_sharedlib] Error 1
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'client_sharedlib' of makefile '/oracle/10g/network/lib/ins_net_client.mk'. See '/oracle/oraInventory/logs/installActions2007-05-31_11-43-39AM.log' for details.
Exception Severity: 1
THX!
error pic:
http://i15.tinypic.com/4kx34a0.png
Message was edited by:
Funky -
Post-Install Error on EBS 12 - Login Page Error RW-50016 on Linux
Hi All,
Post-Install Error on EBS 12 - Login Page Error RW-50016 on Linux
Thanks in advance.set hostnme correctly
-
Cannot install oracle vpn on linux getting error kernel-sourcecode is neede
cannot install oracle vpn on linux getting error kernel-sourcecode is needed by gds_cisco_vpn_client-2.0-llrhel4.i386.. i already installed kernel-devel still it get the same error. pls help.
1. kernel (.rpm)
2. kernel-devel (.rpm) - containing only Makefiles and some kernel header files
3. kernel source rpm (src.rpm) - source for rebuilding the kernel
4. kernel-sourcecode (.rpm) - source-tree for developing custom kernels
are four different packages.
If you are running OEL-4 (2.6.9 kernel) and you have an ULN account, you can download kernel-sourcecode rpm from ULN. There is no kernel-sourcecode for OEL-5 available on ULN site.
NJ -
Hi,
I am installing SAP 4.7 Enterprise on Red Hat 5.3 and Oracle 10.2.0.4. When I install 4.7 Enterpirse I have an error in catproc.sql phase like below: -
ERROR 2009-06-02 18:42:34
CJS-00084 SQL statement or script failed.<br>DIAGNOSIS: Error message: ORA-955 for defaultdestSQL> Rem bnainani 11/29/00 - specify compatible=8.0 for create_queue_tableSQL> Rem liwong 10/20/00 - add def$_destination.flagSQL> Rem bnainani 11/15/00 - specify compatible=8.0 for queue tableSQL> Rem narora 09/13/00 - add comment on new def$_destination columnsSQL> Rem liwong 09/01/00 - add master w/o quiesce: fixesSQL> Rem liwong 07/12/00 - add total_prop_time_latSQL> Rem liwong 06/29/00 - add total_txn_count, total_prop_timeSQL> Rem liwong 05/17/00 - add_master_db w/o quiesceSQL> Rem jstamos 05/17/00 - add_master_db w/o quiesceSQL> Rem elu 01/24/00 - add column apply_init to def$_destinationSQL> Rem alakshmi 12/02/99 - Bug 979398: Before-row insert trigger onSQL> Rem def$_propagatorSQL> Rem wesmith 10/31/98 - change shape of table def$_pushed_transactionsSQL> Rem jnath 02/23/98 - bug 601972: split anonymous pl/sql blocksSQL> Rem wesmith 01/21/98 - create def$_pushed_transactions table forSQL> Rem server-side RepAPISQL> Rem nbhatt 07/27/97 - change create_queuetable -> create_queue_tableSQL> Rem nbhatt 04/21/97 - change 'TRACKING' in CREATE_QUEUE to 'DEPENDENCYSQL> Rem nbhatt 04/21/97 - change syntax of create_queueSQL> Rem liwong 04/16/97 - Alter view system.AQ$DEF$_AQ{CALL,ERROR}SQL> Rem liwong 04/11/97 - Fixing defaultdest_primary typoSQL> Rem jstamos 04/10/97 - remove unneeded indexesSQL> Rem nbhatt 04/08/97 - change create_qtable to create_queuetableSQL> Rem jstamos 04/04/97 - tighter AQ integrationSQL> Rem liwong 04/02/97 - Add schema_name, package_name in def$_calldestSQL> Rem ato 03/31/97 - create_qtable interface changeSQL> Rem liwong 03/25/97 - remove batch_no from def$_tranorderSQL> Rem liwong 02/24/97 - pctversion --> 0 for def$_aqcall, def$_aqerrorSQL> Rem liwong 02/22/97 - Remove dropping view aq$def$_aqcallSQL> Rem ademers 02/07/97 - Remove constraint def$_calldest_callSQL> Rem liwong 01/11/97 - drop and create aq$def$_aqcall (temporary)SQL> Rem liwong 01/10/97 - Alter view aq$def$_aqcallSQL> Rem liwong 01/07/97 - Alter default value for batch_noSQL> Rem jstamos 12/23/96 - change temp$nclob colSQL> Rem jstamos 11/21/96 - nchar supportSQL> Rem sjain 11/11/96 - Remove dummy buffer # commentSQL> Rem asgoel 11/05/96 - Disable misc_tracking in def$_aqerrorSQL> Rem sjain 11/06/96 - deferror changesSQL> Rem vkrishna 10/28/96 - change STORED IN to STORE AS for lobSQL> Rem sjain 10/02/96 - Aq conversionSQL> Rem sbalaram 09/24/96 - ARPC performance - add foreign key indexSQL> Rem jstamos 09/06/96 - rename temp$lob and temporarily change nclobSQL> Rem sjain 09/03/96 - AQ conversonSQL> Rem ademers 08/02/96 - queue_batch default in def_destinationSQL> Rem ademers 07/29/96 - queue_batch default in def_callSQL> Rem ademers 07/29/96 - queue_batch defaultSQL> Rem jstamos 07/24/96 - add system.temp$lobSQL> Rem sbalaram 07/22/96 - create def$_aqcall and def$_aqerror tablesSQL> Rem jstamos 06/12/96 - LOB support for deferred RPCsSQL> Rem ldoo 06/28/96 - Comment out queue_table from def_tranorderSQL> Rem ademers 05/30/96 - create def_originSQL> Rem ademers 05/28/96 - fix def_destination col namesSQL> Rem ldoo 05/09/96 - New security modelSQL> Rem sjain 05/01/96 - add seq col to def_destinationSQL> Rem ademers 04/29/96 - add batch_no, dep_scn to def_callSQL> Rem jstamos 12/04/95 - 324303: use index to avoid sorting the queueSQL> Rem jstamos 08/17/95 - code review changesSQL> Rem jstamos 08/16/95 - add comments to tablesSQL> Rem wmaimone 01/04/96 - 7.3 mergeSQL> Rem hasun 01/31/95 - Modify tables.<br>SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
Also some error lines in ora_sql_results.log file like below:
Connected to an idle instance.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Disconnected
DOC> The following statement will cause an "ORA-01722: invalid number"
DOC> error and terminate the SQLPLUS session if the user is not SYS.
DOC> Disconnect and reconnect with AS SYSDBA.
ERROR at line 1:
ORA-01432: public synonym to be dropped does not exist
ERROR at line 1:
ORA-00942: table or view does not exist
DOC> The following PL/SQL block will cause an ORA-20000 error and
DOC> terminate the current SQLPLUS session if the user is not SYS.
DOC> Disconnect and reconnect with AS SYSDBA.
ERROR at line 1:
ORA-01921: role name 'EXP_FULL_DATABASE' conflicts with another user or role
name
ERROR at line 1:
ORA-01434: private synonym to be dropped does not exist
ERROR at line 1:
ORA-04043: object DIANA does not exist
ERROR at line 1:
ORA-04043: object DIUTIL does not exist
ERROR at line 1:
ORA-04043: object DIUTIL does not exist
ERROR at line 1:
ORA-04043: object SUBPTXT2 does not exist
ERROR at line 1:
ORA-04043: object CREATE_TABLE_COST_COLUMNS does not exist
ERROR at line 1:
ORA-01434: private synonym to be dropped does not exist
And ora_sql.log file is:
connect / as sysdba ;
SHUTDOWN ABORT;
exit;
Executed successfully.
connect / as sysdba ;
SHUTDOWN IMMEDIATE;
exit;
Executed with error.
connect / as sysdba ;
STARTUP NOMOUNT;
exit;
Executed successfully.
connect / as sysdba ;
CREATE DATABASE MDP CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/MDP/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/MDP/sapdata1/temp_1/temp.data1' SIZE 1750M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/MDP/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/MDP/sapdata1/sysaux_1/sysaux.data1' SIZE 1000M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/MDP/origlogA/log_g11m1.dbf',
'/oracle/MDP/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('/oracle/MDP/origlogB/log_g12m1.dbf',
'/oracle/MDP/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('/oracle/MDP/origlogA/log_g13m1.dbf',
'/oracle/MDP/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('/oracle/MDP/origlogB/log_g14m1.dbf',
'/oracle/MDP/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
exit;
Executed successfully.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catalog.sql
exit;
Executed successfully.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catblock.sql
exit;
Executed successfully.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
The errors are like these. How can I correct these errors and continue to installation? Is the oracle version 10.2.0.4 not correct version to install 4.7 enterprise on Red Hat Linux 5.3?
Best regards,Hi Markus,
I found 5 ERROR. There are different lines.
First one:
<fld name="STATUS">
<strval><![CDATA[ERROR]]>
Second one:
CASE (= 'AUTOALLOCATE') RETURN (' AUTOALLOCATE '),
CASE (DEFAULT) RETURN (' ERROR ' + (tTablespaces.extMgmtAllocMode
Third one:
CASE (= 'DICTIONARY') RETURN (' DICTIONARY '),
CASE (DEFAULT) RETURN (' ERROR ' + (tTablespaces.extMgmtMode
Fourth one:
CASE (= 'AUTOALLOCATE') RETURN (' AUTOALLOCATE '),
CASE (DEFAULT) RETURN (' ERROR ' + (tTablespaces.extMgmtAllocMode
Fifth one:
CASE (= 'DICTIONARY') RETURN (' DICTIONARY '),
CASE (DEFAULT) RETURN (' ERROR ' + (tTablespaces.extMgmtMode
Which one will I change to OK? Must all off them change to OK?
Also is this problem about only these oracle error in your oppinion? For example in first line of ora_sql_results.log I have an error like below:
CJS-00084 SQL statement or script failed
Connected to an idle instance.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
But ORACLE_HOME and ORACLE_SID environment variable are ok. Also I can connect and start and stop database manually. There is no problem about it.
I installed anly Oracle patch 10.2.0.4. I didn't install any oracle interim patch. Should I have install oracle interim patch for Oracle 10.2.0.4?
Best regards, -
(EPG Install) Error while loading image
Hi,
I am facing "ORA-22288: file or LOB operation FILEOPEN failed" error while running apex_epg_config step. But all the steps before that (i.e. APEX Install [@apexins users users temp /i/] and change admin password) went all fine.
I am trying to install APEX 4.1 on "Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production".
I went through [url https://forums.oracle.com/forums/thread.jspa?messageID=9673913]this thread. But I am not passing /apex directory (apex directory is under "C:/Ash/Technical/Database/Oracle/apex4.1") , here is the outcome:
C:\Ash\Technical\Database\Oracle\apex4.1\apex>
11:33:41 sys@dev10db> @apex_epg_config.sql C:/Ash/Technical/Database/Oracle/apex4.1
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.21
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.03
Directory created.
Elapsed: 00:00:00.03
declare
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
No such file or directory
ORA-06512: at "SYS.XMLTYPE", line 296
ORA-06512: at line 18
Elapsed: 00:00:00.04
Commit complete.
Elapsed: 00:00:00.00
PL/SQL procedure successfully completed.
Elapsed: 00:00:01.14
declare
ERROR at line 1:
ORA-31001: Invalid resource handle or path name "/images"
ORA-06512: at "XDB.DBMS_XDB", line 473
ORA-06512: at line 37
Elapsed: 00:00:00.17
timing for: Load Images
Elapsed: 00:00:01.42
Session altered.
Elapsed: 00:00:00.00
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.48
Commit complete.
Elapsed: 00:00:00.01
Session altered.
Elapsed: 00:00:00.01
Directory dropped.
Elapsed: 00:00:00.07I am installing from my windows XP, but the db server is on Linux.
Error above (line 18) is actually on this line of "apex_epg_config_core.sql" (my db charset is UTF8)
filelist_xml xmltype := xmltype(bfilename(upload_directory_name,file_list),nls_charset_id('AL32UTF8'));
The error clearly suggest that the there is an issue with access my directory or file in that directory.
And I believe the 2nd error "ORA-31001: Invalid resource handle or path name "/images"", will go itself once the first one is resolved.
I went through the documentation and other forum threads, but I am stuck with this EPG install, it may be very silly thing that I may be missing, but any help in this matter would be highly appreciated.
Thanks,
Ash
Edited by: ash0602 on Sep 5, 2011 5:19 PMThanks Andy and Kiran for taking time to respond.
Andy, "@apex_epg_config.sql C:/Ash/Technical/Database/Oracle/" will not solve the problem, neither changing directory's name from apex4.1 to apex_4.1_en, as my directory structure till images is: "C:\Ash\Technical\Database\Oracle\apex4.1\apex\images".
Kiran, sorry but I do not understand the difference between what I have written what you mentioned above.
Though I understood the issue, when you see the apex underlying code (apex_epg_config_core.sql) it is actually creating a directory object ('APEX_IMAGES') in the database. While I was trying to refer the directory on my local windows PC ('C:\Ash\Technical\Database\Oracle\apex4.1\apex\images'). I then logged into the LINUX server and ran the command and it all went fine, see the response below:
SQL> @apex_epg_config /opt/oracle/product/11.2.0/db1
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as '/opt/oracle/product/11.2.0/db1/apex/images'
Directory created.
old 47: if '&IMGUPG' != '' then
new 47: if '' != '' then
old 48: l_mv_folder := '&IMGUPG';
new 48: l_mv_folder := '';
PL/SQL procedure successfully completed.
Commit complete.
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
timing for: Load Images
Elapsed: 00:00:31.78
Session altered.
PL/SQL procedure successfully completed.
Commit complete.
Session altered.
Directory dropped.Though I moved 1 step forward, but my apex login page (http://<server>:8080/apex/apex_admin => redirected to http://<server>:8080/apex/f?p=4550:10:<session>) refuse to come up as it is now showing "[url https://forums.oracle.com/forums/thread.jspa?threadID=1112378]apex is undefined" error.
I did the installation as [@apexins users users temp /i/] mentioned in the docs, and this is first install not the upgrade.
Any help on this ['apex' is undefined] (javascript error) would be really helpful.
Thanks,
Ash -
Errors - ORA-01034, ORA-27101 & Linux-x86_64 Error: 2: No such file or dir
I have installed Oracle 10g database and AS 10g on SUSE linux EE 10 (SP2)
When I try to log in as system/system using sqlplus locally on the server, it works fine. However, when I try the following I get error messages:
SQL> conn system/system@botsdb
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
I tried the same from my laptop through sqlplus and the error message is the same.
I checked if the database was up and to check this I executed follwing commands whicle still being logged as system/system:
SQL>Select * from v$database;
SQL>Select * from v$instance;
SQL>Select * from tab;
These do bring results. Also if I try to start up the database again, it gives error message that the database is already up. I have restarted the db number of times, checked if my listener was listening on the service BOTSDB and these all seem fine.
It is very intriguing that when @BOTSDB is attached while connecting, the connection fails.
Can someone please guide me to sort this error?
Thanks and kind regards,
AparnaHi
I am answering all the three questions here.
1) No of instances on the machine, I understand it is 1.
2) Results of lsnrctl status
oracle@linuxserver:~> lsnrctl status
LSNRCTL for Linux: Version 10.1.0.4.2 - Production on 28-JUL-2010 09:19:33
Copyright (c) 1991, 2004, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=linuxserv.dcdm.mu)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.1.0.4.2 - Production
Start Date 27-JUL-2010 11:24:12
Uptime 0 days 21 hr. 55 min. 20 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/app/ora10ginfra/network/admin/listener.ora
Listener Log File /oracle/app/ora10ginfra/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=linuxserver.dcdm.mu)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "metarep.dcdm.mu" has 1 instance(s).
Instance "metarep", status READY, has 3 handler(s) for this service...
The command completed successfully
--Note that lsnrctl status command was issued after loading 10ginfra.env file.
Please note that the listener for the database is set as DBLISTENER and lsnrctl status DBLISTENER was executed after loading 10gdb.env file. The results of lsnrctl status DBLISTENER are as follows:
oracle@linuxserver:~> . ./10gdb.env
oracle@linuxserver:~> lsnrctl status DBLISTENER
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 28-JUL-2010 09:24:44
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=172.16.107.123)(PORT=1650)))
STATUS of the LISTENER
Alias DBLISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 27-JUL-2010 15:11:28
Uptime 0 days 18 hr. 13 min. 15 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/app/ora10gdb/network/admin/listener.ora
Listener Log File /oracle/app/ora10gdb/network/log/dblistener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.16.107.123)(PORT=1650)))
Services Summary...
Service "BOTSDB" has 1 instance(s).
Instance "BOTSDB", status UNKNOWN, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
3) The output of ps -ef |grep pmon is
oracle@linuxserver:~> ps -ef |grep pmon
oracle 12524 12091 0 09:16 pts/1 00:00:00 grep pmon
oracle 12525 1 0 Jul27 ? 00:00:00 ora_pmon_metarep
oracle 25776 1 0 Jul27 ? 00:00:00 ora_pmon_BOTSDB
The contents of listener.ora in two different Oracle Homes (one for AS infrastrcuture and another one for database) are as follows:
oracle@linuxserver:/oracle/app/ora10ginfra/network/admin> vi listener.ora
# listener.ora Network Configuration File: /oracle/app/ora10ginfra/network/admin/listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/app/ora10ginfra)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = linuxserv.dcdm.mu)(PORT = 1521))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC))
oracle@linuxserver:/oracle/app/ora10gdb/network/admin> vi listener.ora
# Generated by Oracle configuration tools.
SID_LIST_DBLISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = /oracle/app/ora10gdb/)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = BOTSDB)
(ORACLE_HOME = /oracle/app/ora10gdb/)
DBLISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.107.123)(PORT = 1650))
Kind regards,
Aparna -
Oracle 10G Linux runInstaller Error in writing to directory
RDBMS Version: 10.1.0.3.0
Operating System and Version: Enterprise Red Hat Linux 4.0
Linux runInstaller Error in writing to directory
Steps :-
1. Downloaded the Install 10.1.0.3 for Linux X86
2. Followed the Instructions as per B15521-01
3. When running runInstaller got below Error
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8or UnitedLinux-1.0
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at /tmp/OraInstall2005-06-28_01-40-22PM/installActions2005-06-28_01-40-22PM.log
4. Found Patch 4153257 after unzipping the file and running as below got another error
$ ./runInstaller -paramFile /home/oracle/p4153257
Starting Oracle Universal Installer...
No pre-requisite checks found in oraparam.ini, no system pre-requisite checks will be executed.
The Java RunTime Environment was not found at 0/bin/java. Hence, the Oracle Universal Installer cannot be run.
Please visit http://www.javasoft.com and install JRE version 1.3.1 or higher and try again.
: No such file or directory
5. Then Copied the oraparam.ini to the folder where the original oraparam.ini file was present ie /tmp/orcl/Disk1/install
6. After running the installer again got below error
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8, UnitedLinux-1.0 or redhat-4
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 3409 MB Passed
Checking swap space: must be greater than 150 MB. Actual 2055MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2005-06-28_01-53-49PM. Please wait ...sh: /tmp/orcl/Disk1/install/unzip: No such file or directory
Error in writing to directory /tmp/OraInstall2005-06-28_01-53-49PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
7. Saw the Error that it was looking for unzip in /tmp/orcl/Disk1/install so Created a Soft link
8. Still the other Error exists ie as below. Well the DIR is created and oracle user has written files. So not sure why it says check disk space or directory is writable.
$ ./runInstaller
Starting Oracle Universal Installer...
Checking installer requirements...
Checking operating system version: must be redhat-2.1, redhat-3, SuSE-9, SuSE-8, UnitedLinux-1.0 or redhat-4
Passed
All installer requirements met.
Checking Temp space: must be greater than 80 MB. Actual 3409 MB Passed
Checking swap space: must be greater than 150 MB. Actual 2055MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 65536 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2005-06-28_02-23-50PM. Please wait ...
Error in writing to directory /tmp/OraInstall2005-06-28_02-23-50PM. Please ensure that this directory is writable and has atleast 60 MB of disk space. Installation cannot continue.
: Success
$ ls -al /tmp/OraInstall2005-06-28_02-23-50PM
total 40
drwxr-xr-x 3 oracle oinstall 4096 Jun 28 14:23 .
drwxrwxrwt 44 root root 4096 Jun 29 04:03 ..
-rwxr-xr-x 1 oracle oinstall 4036 Jun 28 14:23 command_output_27899
drwxr-xr-x 2 oracle oinstall 4096 Jun 28 14:23 images
-rwxr-xr-x 1 oracle oinstall 528 Jun 28 14:23 installActions2005-06-28_02-23-50PM.logI am not sure what was wrong in the Initial download of the Install.
I did it again and this time it came properly and all the files in the install directory ie unzip was present and the Installer came up properly. -
Patch install error
As part of the Upgrading developer 6i with E-Business 11i
I was asked to apply patch 4586086
The following command failed
make -f cus_forms60w.mk libso_install
make: *** No rule to make target `libso_install'. Stop.
I was asked to
To Check X version
===================
Linux:
rpm -qa|grep openmotif
openmotif-2.1.30-4_MLI 7.1
openmotif-2.1.30-11
openmotif-devel-2.1.30-11
I am running SUSE Linux
Is it important to have only the above.....
Could I not have the latest version of openmotif ?
Please guide meHi
This is my current situation.
I installed the patches recommended by you.
Currently the output of rpm -qa|grep motif is
oracle@test-app:/apps11510/dev/devora/8.0.6/bin> rpm -qa|grep motif
openmotif-libs-2.2.2-519.4
openmotif-2.2.2-519.4
openmotif21-libs-2.1.30MLI4-119.4
I am applying patches as per document 125767.1
I think I must have made some mistake in the sequence of steps or some other error....
First let me give some details about my environment
We have two servers
a) test-db
This runs Oracle database and
Reports Server and
Concurrent Manager and
Reports review agent
b) test-app
This runs Forms Metric Server and
Forms Server Listener and
Forms Metric client and
Report Review agent and
HTTP Web server and
Discoverer Server and
Fulfillment server
I am confident that I have correctly followed all steps 1 - 5 of the
document 125767.1
Now step 6
I have installed all the following patches on ONLY test-app
6194129 and
7343387 and
7156414 and
6125732 and
6857221 and
3830807 and
4586086 ( This is where it failed)
Question - Should I have installed these patches on both servers test-app and test-db
Question - should all the patches mentioned in the document be applied
(6194129,7343387,7156414,6125732,6857221,3830807,4586086)
as part of step 6 and step 7 and then move to step 8 ? -
Failure to install CD 3 of Linux install set
Downloaded four zip files from the following location:
http://edelivery.oracle.com/linux
Unzipped them to the ISO files and then burned the four CDs - no problem and the CDs were validated as okay. During the install CD1 - no problem, CD2 - no problem, CD3- problem - wrong CD was the error message. So redownloaded, unzipped, and reburned CD3. Redo and precisely the same error.
THEN went to the following location and downloaded the five ISO images from here and burned the corresponding CDs.
http://linux.us.oracle.com/isofs/RedHat/RHEL4/i386/ES/U4
Burned the five CDs and they validated as okay. Install - CD1 - no problem, CD2 - no problem, CD3- problem - wrong CD was the error message. Precisely the same thing as above.
THEN - took both sets of CDs, and instead of my home machine I took them to an ed center and attempted the install on a spare machine and get exactly the same errors as above.
What is going on - seems like it always CD3 (regardless of the number of CDs) that croaks - how do I get Linux installed?
THANKS for any help - Ken CooperDid any of you ever solve this problem ? -
I have same issue with CD 3, no matter what I try it claims to be unable to read the darn thing !
The packages it has failed on so far is XDELTA / ZSH / SENDMAIL - all from CD3
I have tried burning a new CD3 copy -> same thing.
I changed the CD drive of the server. Dunno why it would accept CD1 and CD2 but not CD3 - anyway it didnt work either !
Tried using both CD's in another PC and was able to extract and view the faulted packages without a glitch !?!
I'm lost for clues . . .
Now i'll try fetching the CD3 again and burn a third copy....
And then i'll try to choose to few things that it might not need cd3.
If that also fails i'll throw everything away and ask them to use MySQL or MSSQL :)
Is there any way to copy the stuff to harddisk and run install from there !?
- just point me to the manual if I overlooked that possibility :) ? -
? Linux Install via vncviewer post install ? device xvda was unreadable ?
Thanks in advance:
Using 64 bit new server/ I've successfully installed version 2.1 64bit of VM Server.
During the virt-install --vnc
# mount -o ro,loop /OVS/running_pool/rac1/rhel-5.1-server-x86_64-disc1.iso /el/EL5x86_64
# service iptables stop
# service portmap restart
# service nfs restart
# exportfs *:/el/EL5x86_64
What is the name of your virtual machine? : rac1
How much RAM should be allocated: 8000
What would you like to use as the disk (path)? /OVS/running_pool/rac1/rac.img
How large would you like the disk (/OVS/running_pool/rac1/rac1.img (gigabytes)? 100
Would you like to enable graphics support? (yes or no): yes
What is the install location? nfs:192.168.1.11:/el/EL5x86_64
Then I set the DISPLAY=<client-ip>:0.0
The /etc/exports contains: /el/EL5x86_64 *(rw,no_root_squash)
During the Linux Install
1. I configure the IP for the Guest OS install
2. Configure TCP/IP for the new Guest OS
I Get a Warning on the Red Hat Enterprise Linux 5
The Partition table on device xvda was unreadable to create new partitions it must be initialized, causing the loss of ALL DATA on this drive.
I choose: YES
Because it will not allow me to choose NO
Then I get the following:
Remove Linux partitions on selected drives and create default layout
The Select the drive(s) to use for this installation
I see
Check for xvda 102399 MB Xen Virtual Block Device
Then I get the ERROR:
The file system-config-services-0.9.4-1.el5.noarch.rpm can not be opened.
I appreciate advice heterthe rpm package, system-config-services-0.9.4-1.el5.0.1.noarch.rpm is not in the first disk,but in second ISO file.
.../Enterprise-R5-U1-Server-x86_64-disc2.iso/Server/system-config-services-0.9.4-1.el5.0.1.noarch.rpm
so you need change to second ISO file. or you may download EL5.1 DVD,and need not switch iso file since all rpm packages in one ISO file.
Maybe you are looking for
-
Bank details printed on invoice
Hi Friends, Please can you tell me from where bank details are printed on invoice, In case of one of my co. ,bank details are not correctly printed on invoice , i checked vendor master ( we are having co.codes created as vendor & customer, for inter
-
Cancellation of GR (161 Movement)
Hi Experts, We have posted a MIGO (161 movement) and posted credit memo also. Now we want to cancel that MIGO. When I am cancelling the MIGO "Deficit of PU IR quantity 85.000 NOS". But I suppost material should be added in our store location stock no
-
ColdFusion Archives option is missing
Hi, I have a CF7 Standard installed on Windows 2003 Server with IIS 5.1. I noticed that under Packaging and Deployment menu in Coldfusion Administrator, the only option listed is J2EE archives. ColdFusion Archives option is missing. Any idea as why C
-
Pocessing message on same server in HA
Hi. I set up the PI hA environment as Note 1052984. After this configuration, Sender adapter(running server A) send to integration Engine "running on serverA" or "running on server B". And the integration Engine(running server A) send to receiver ada
-
Database Home page display : The database target is currently unavailable
Hello, I Installed OEM Gird 11g on an Windows 2008 R2 version Installed : - Oracle Enterprise Manager Grid Console 11.1.0.1.0 - WebLogic Platform 10.3.2.0 - Oracle WebTier and Utilities CD 11.1.1.2.0 To make it running I have to disable IPV6 ! One th