Linux installation and display issues

PROBLEM:
During installation, the following error occurs:
No Java virtual machine could be found from your PATH
environment variable. You must install a VM prior to
running this program.
RESOLUTION:
Install Java 1.5 and make sure that it's in your PATH environment. To
doublecheck that Java 1.5, simply
type 'java -version'.
PROBLEM:
When opening any display view, the following error occurs and nothing shows
up:
ERROR GuardianApplication [main] : Registry does not exist, creating
default registry
Unhandled event loop exception
Reason:
No more handles (java.lang.UnsatisfiedLinkError:
/<GUARDIAN_INSTALL_DIR>/configuration/
org.eclipse.osgi/bundles/72/1/.cp/libswt-mozilla-gtk-3139.so: libstdc++.so.5:
cannot open shared
object file: No such file or directory)
RESOLUTION:
Add your browser's library dependencies by editing the /etc/ld.so.conf and
add /<PATH>/firefox or /
<PATH>/mozilla directory.
Example: /usr/lib/firefox-1.5.0.7
Make sure that the path to firefox or mozilla contains the
/usr/lib/firefox-1.5.0.7/libxpcom.so. After
that, run ldconfig command to update your library.
Install compat-libstdc++-33 library. For Fedora users, simply type: "yum
install compat-libstdc+
+-33.i386" as root. Relaunch Guardian.

I am really interested on comments. Anyway check also those sites about Linux on Toshiba notebooks:
http://linux.toshiba-dme.co.jp/linux/index.htm
http://newsletter.toshiba-tro.de/main/index.html

Similar Messages

Broken linux installation and not working start windows 7

Ok so lets try it again. I have my Win 7 Home premium - given with new computer. So, how can i change bootmanager or bootpartition? Some guy here told me it will help. Can someone tell me it step by step- my windows doesnt start. What happened? I installed
kali linux and stopped installation. It was ok. But I tried to install again and maybe linux locked some partition for itself. Now it stuck on black loading screen with windows logo. I tried factory settings, recovery but nothing helps. So i need help with
changing bootpartition in windows. Or if u think problem isnt in partition, please help. Thank you.

Hi, the fact you have a widnows logo is a good thing. It seems the bootloader is fine, but Windows might be confused because of changed partitions.
boot the Windows cd and use Startup repair
http://support.microsoft.com/kb/927392
http://windows.microsoft.com/en-us/windows/startup-repair-faq#1TC=windows-7
If that does not solve the issue, you can attempt to recover set the boot sectors using bootrec.
Note that Windows setup does not recognize linux partitions and might in some cases destroy data on them or disbale booting them.
If possible, could you post some more info on your failed Kali instalaltion? Did you reserve a partition or disk for it? Why did it fail?
MCP/MCSA/MCTS/MCITP

MacBook Pro Startup and Display Issues

I've been having some random problems with my MacBook Pro (2.16 GHz, 2 GB RAM, 100 GB 7200 rpm hard drive, ATI Radeon X1600 graphics). Specifically:
1. Lines across the screen and purple boxes sometimes appear.
2. The graphic effects (e.g. zooming a window) sometimes get "frozen" on the screen. In other words a remnant from the animation will stay until the window is refreshed.
3. The Mac sometimes freezes during the startup process. Sometimes the login screen will be unresponsive and other times the Mac will almost bootup but fail when loading startup items.
4. Less frequently the Mac will freeze randomly. I previously had iStat Menus installed and each time the MacBook Pro froze up it indicated both read and write disk activities.
Yesterday I decided to wipe the machine clean and start from scratch in case there were a software issue or corruption on the hard drive that was causing my woes. I completely erased my hard drive and even zeroed the entire disk to make sure everything was completely wiped out. I also disconnected all peripherals to simplify things as much as possible.
The first time I tried the reinstall everything completed successfully but the "Welcome" movie froze part way through. I then had problems running the install again. I was able to boot off the Leopard DVD, but the machine froze a couple of clicks into the install procedure. After numerous tries I was able to erase the hard drive once again and install Leopard. This completed successfully and I installed all updates.
The problems started to show up again almost immediately, however. I installed iLife and iWork and all the updates and had the computer freeze up on me again during a reboot. I also noticed that the display issues started to show up again even before installing any third-party software.
I've tried running disk tests with Drive Genius 2.1, but no errors have been reported. I've also used the freeware Rember program to run memory tests but have yet to see any errors. Sometimes my Mac powers up without any problems and once it's powered up it often stays running for days. The display issues appear quite frequently. I've using iStat Menus to keep an eye on the temperature sensors and everything appears to be normal - so it doesn't appear to be temperature related.
Fortunately the computer's still covered under the extended AppleCare warranty, but I would like to have some idea what's going on before I take it in just in case they're not able to reproduce the issues.
Any suggestions and insights would be GREATLY appreciated. Thanks in advance for reading my rather long-winded message.
Cheers,
Tim

I took my MacBook Pro in for repair and it turned out to be an issue with the logic board. I had the logic board replaced (fortunately it was covered under my extended AppleCare warranty) and these problems are a thing of the past.

Installation and Other Issues

I recently upgraded from Crystal 11.5 to Crystal 2008. Since then I have been battling a host of problems trying to make this work. This is the latest.
I had a problem running some older reports in a web application. I was getting the Login Failed error, which can mean about anything. So I was going to upgrade the report definition to the new Crystal 2008 format. Since I installed Crystal 2008, I have been having an issue with the report designer. The disoplay would not refresh the background. Whatever was on the screen when you opened the designer was in teh background and if you opened a dialog while in the designer, it remained on the screen even though the function completed successfully. This confusing display made the designer impossible to work with.
So I decided to reinstall Crystal 2008 to see if there was something wrong in the setup. I opend control panel and uninstalled all the crystal 2008 components, which included Crystal 2008 SP2, Crystal 2008 SP3 and one other component. All the uninstalls ran successfully. I still have Crystal Reports XI release 2 installed.
I tried to run the install for Crystal. The install runs fine until it comes to the section to register the dll's. Then it fails. Below is the first message that I get. After that I get the same message for every module to be registered.
Error 1904. Module C: u2018program Files\BusinessObjects\BusinessQbjects Enterprise 12.0\win32_x86\ReportConvTool .dll failed to register.
HRESULT -2147024770. Contact your support personnel.
I have every version of the .Net framework on this machine and they are all up to the most current level. I have Visual Studio 2005 and Visual Studio 2008 on this machine as well. I am an administrator, and I do not have permission issues.
I am getting very weary of dealing with Crystal Reports technical problems. Nothing should be this difficult to make it work out of the box. Can someone help me.

Hello,
PLEASE don't post the same question in multiple forums.
Install SP3 and test again and then search this for forum as well as Microsoft's site for the 1904 error. It's an MSIExec error code. Typically it's missing Windows dependencies or your PC needs to upgrade the MS Installer program.
Usually when dll's fail to register is because the OS is missing windows dependencies and likely the C++ runtime package.
Thank you
Don

Adobe Creative Suite 5.5 Master Collection Installation and support Issue

My windows 7 operating system became corrupted and I needed to do a fresh installation of both the operating system and the the creative suite.
After installing both the operating system and the creative suite I received an error saying that the program has not installed correctly and to contact support.
I contacted support and I was told support wouldn't help me correct the problem and to ask the forum on how to fix this issue.
Any help on how to resolve this issue would be great!
The files that didn't install correctly were:
WARNING: DW031: Payload:{61A3D10A-AA4D-4E4C-B9DB-6A08D318EA41} Photoshop Camera Raw (64 bit) 6.0.0.0 has been updated and has been selected for repair. The patch {32841ECE-EC28-42CD-A4DD-6CE832A7EA8D} Photoshop Camera Raw (64 bit)_6.3_AdobeCameraRaw6.0All-x64 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {42774483-D33C-46F7-8B20-FD0B1A3DAC25} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{61A3D10A-AA4D-4E4C-B9DB-6A08D318EA41} Photoshop Camera Raw (64 bit) 6.0.0.0 has been updated and has been selected for repair. The patch {32841ECE-EC28-42CD-A4DD-6CE832A7EA8D} Photoshop Camera Raw (64 bit)_6.3_AdobeCameraRaw6.0All-x64 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{2EBE92C3-F9D8-48B5-A32B-04FA5D1709FA} Adobe XMP Panels CS5 3.0.0.0 has been updated and has been selected for repair. The patch {42774483-D33C-46F7-8B20-FD0B1A3DAC25} Adobe XMP Panels CS5_3.1_AdobeXMPPanelsAll 3.1.0.0 will be uninstalled now.
WARNING: DW031: Payload:{3F023875-4A52-4605-9DB6-A88D4A813E8D} Camera Profiles Installer 6.0.0.0 has been updated and has been selected for repair. The patch {A189C479-C7CD-4E08-8CCF-D999B68C0C71} Camera Profiles Installer_6.3_AdobeCameraRawProfile6.0All 6.3.0.0 will be uninstalled now.
WARNING: DW031: Payload:{37AB3C65-E02C-4DCF-B0E0-4C2E253D8FA3} Photoshop Camera Raw 6.0.0.0 has been updated and has been selected for repair. The patch {FD58D99B-9927-4226-8E00-959A4F76BD89} Photoshop Camera Raw_6.3_AdobeCameraRaw6.0All 6.3.0.0 will be uninstalled now.
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.FE9047P-1019rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f8049309 1e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Master Collection CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {7202D4A7-F7E6-4e7a-B77D-7B1C4E8B5CA6} Adobe Flash Player 10 ActiveX 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\REDDWA~1\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or package vendor. Action NewCustomAction1, location: C:\Users\REDDWA~1\AppData\Local\Temp\InstallAX.exe, command: -install activex -msi
----------- Payload: {11C0657F-2BD4-4CBC-87F3-9455DC91886E} Recommended Common Fonts Installation x64 1.0.0.0 -----------
WARNING: DF054: Unable to read Adobe file version for file path 'C:\Windows\Fonts\RosewoodStd-Regular.otf'(Seq 60)
ERROR: DF012: Unable to find file(Seq 60)
ERROR: Error code: 2(Seq 60)
----------- Payload: {47CE893F-A0FF-4094-AA16-5209AEA7C7E0} Firefox Plugin CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at D:\Adobe CS5_5\payloads\AdobeContribute6.1-FFPlugin\OEM(Seq 32)
----------- Payload: {208DE3D5-541C-41B0-8595-7A608A6E4306} IE Plugin CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at D:\Adobe CS5_5\payloads\AdobeContribute6.1-IEPlugin\OEM(Seq 26)
----------- Payload: {4A4F91EA-5951-4C5C-B911-027D802817EB} Office Plugin CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at D:\Adobe CS5_5\payloads\AdobeContribute6.1-OfficePlugin\OEM(Seq 34)
----------- Payload: {DD309051-FACF-4A5E-87F1-C57154BB3DE8} Adobe Contribute CS5.1 6.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at D:\Adobe CS5_5\payloads\AdobeContribute6.1-mul\OEM(Seq 8283)
----------- Payload: {8DADF070-FE60-4899-8EF0-4242E7702F7D} Adobe Fireworks CS5.1 11.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at D:\Adobe CS5_5\payloads\AdobeFireworks11.1.0All\OEM(Seq 1215)
ERROR: DF023: Unable to delete backup file at "C:\adobeTemp\backup\adobetmp6552922255" Error 5 Access is denied.(Seq 74)
ERROR: DW063: Error committing command ARKDeleteFileCommand(Seq 74)
----------- Payload: {1C9D6B02-8B92-4E40-8B22-37D8C95430F0} Adobe Fireworks CS5.1_AdobeFireworks11.1.0en_USLanguagePack 11.1.0.0 -----------
WARNING: DF012: File/Folder does not exist at D:\Adobe CS5_5\payloads\AdobeFireworks11.1.0en_USLanguagePack\OEM(Seq 74)
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Flash Player 10 Plugin: Install failed
ERROR: DW050: - Adobe Flash Player 10 ActiveX: Install failed

Partrick Gray it from the error message you have posted there appears to be a problem with the Windows Installer Service. Please see Error "1721 [or 1722]: There is a problem with this...package" when installing | CS4 | Windows for additional details.

Installation and compatibility issues with photoshop CS4 - Win 8

I recently purchased a new computer with Windows 8. I am experiencing issues when attempting to install the downloaded and upgrade copy of photoshop CS4. Initially unpacking the software presented issues, but I believe they've been resolved - specifically I had to change the folder attribute from read only while unpacking, of course the tedium arose when this endeavor didn't seem to apply the new attributes to all subfolders and files. I percivered though by repeating it for each folder throughout. When I select the icon for the setup.exe file though the process ends as quickly as it began. I considered that it my have been seeking the previous version (in my case photoshop elements) so I sought to install it first, but as you may have guessed the old software is experiencing it's own compatibility issues. Does anyone know if photoshop CS4 will even work in Windows 8, and I hope someone will have already cleared this hurdle and can give me direction - please, I really am hoping for a life preserver here!
Thankyou, Chris
PS I did attempt to open one of the attached adobe reader files that came with the downloaded copy, but unfortunately they won't open prior to installation given they show the file size 0kb. I don't know if these files are simply acting as place holders for the cab files - or whether there remains an issue while unpacking the files to begin with.

If the executable doesn't even run, it's either being shut down by some security stuff on your system or can't find a component. Impossible to tell. whiel there may be compatibility issues, on a more general level CS4 should run on Win 8...
Mylenium

Two independent installation and performance issue

Hi,
We have installed two independent DBs (11gr2 enterprise 64 bit)on a large box with 80 cores 256GB RAM.
The data files for both DBs are on ram. The objective is to find if we can double perf number with two instances.
What we see is that when both instances are run the "log file sync" event takes 5 times more time (there are other wait events also go up).
db2: (when db2 running alone)
log file sync 202,445 21 0 .9 Commit
db2: (when db1 & db2 running together)
log file sync 267,512 97 0 4.5 Commit
The CPU load average -1 comes down from
14.1 to 1.68 though CPU utilization jumps from 41% to 82%.
There are two independent installations. We are trying to find out how one instance of DB can affect other (make other wait more), unless there is an underlying issue in the common resource used by both.
The SGAs should be allocated and accessed by DBs separately, right?
ipcs -m shows:
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
0xe93e5adc 262144 oracle 660 4096 0
0x13074fa0 491521 oracle 660 1612709888 0
0xcd05b8c4 622594 oracle 660 4096 0
if we turn off one db then
------ Shared Memory Segments --------
key shmid owner perms bytes nattch status
0x13074fa0 491521 oracle 660 1612709888 0
0xcd05b8c4 622594 oracle 660 4096 0
I am not very familiar oracle and do not know how to find memory layout of oracle DB. Any help/pointer is appreciated.
What is the best way to find out that two DBs do not share the same SGA/resources?
The two DBS have everything different except ora inventory.
Kallol Biswas
[email protected]
NucleoDyne Systems, Inc.

Without a lot more information there really isn't much one can say other than that, properly installed, the two should be completely independent of each other.
That said it seems that is not the case which takes us back to what none of us out here can know ... what isn't as you assume it should be.
What is most confusing to me is this statement:
The data files for both DBs are on ram. The objective is to find if we can double perf number with two instances.I have no idea what either sentence is intended to mean. The first because datafiles are not "on RAM" and the second because two instances will never double anything other than resource utilization and overhead.

Faulty Installation and Unique Issues

First of all, I'll tell you I'm in the middle of Nowhere, China and no one here knows what Apple, Mac, or FireWire means in Chinese or English. It's just not known here.
My MacBook suffered a loss of power today during an upgrade to Leopard that I had been putting off. Now I can start from the Installation Disc, but if I select "Macintosh HD" at startup, I eventually get delivered to a grey screen that goes nowhere. Starting from the disc to try to reinstall presents the problem of not enough storage space now that the faulty install has eaten up a good 7 or so GB. I tell you I'm in China because I can't find a FireWire here to use in Target Disk Mode and the government has issued a halt on the mailing of any electronic equipment until November 1, 2008, because of the Olympics. Now I have a brick instead of a MacBook that I'm not willing to clean install because it's LOADED with irreplaceable data that I can't transfer (to my knowledge, which is where you come in) at this point. I still have the option to run utilities when the installation disk is in, but am not experienced enough to know without your help how to make a backup to any kind of external disk from there. Also, if there's a way to just reverse what changes were made in the faulty installation from 10.4.11 to 10.5.1, I'd be more than happy to hear those or any other solutions you have to offer. Thanks a million!!

If you can boot with the install disks and can hook up an external HD, then use Disk Utility to create an image of the hosed internal HD (result of interrupted installation) onto the ext HD. Then, wipe and reinstall Leopard (since I'm assuming that you failed to make a bootable backup of your Tiger installation), boot into the installation, mount the disk image, and try to use the Migration Assistant to transfer user and network settings.

CCP 2.6 Javascript error and display issues

Hello ,
I am atttempting to run CCP2.6 and have tried clearing cache on IE (temp internet/website files, cookies, history) and removed all Java files including trace/log files, chaced apps and applets , and installed apps and applets.Also ran CCP as admin. Essentially followed all guidelines to solution to discussion "CCP 2.5 Javascript Error" but has not resolved issue.
I still get the error below and the bottom 2/3 of the CCP screen is not displayed/rendered. Content is only rendered within a sliver of entire window size , at top part of the window. It appears as if Java should be rendering content at mid/bottom section of window but never does, although a tempory splash screen does appear as if it is "attempting".
netscape.javascript.JSException: No such method "invokeLaunchDashboard" on JavaScript object
at sun.plugin2.main.client.MessagePassingJSObject.newJSException(Unknown Source)
at sun.plugin2.main.client.MessagePassingJSObject.waitForReply(Unknown Source)
at sun.plugin2.main.client.MessagePassingJSObject.call(Unknown Source)
at com.cisco.xdm.CounterpointSDMApplet.init(CounterpointSDMApplet.java:310)
at com.sun.deploy.uitoolkit.impl.awt.AWTAppletAdapter.init(Unknown Source)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
I am using
System:
Windows 7 SP1
IE10
java version "1.7.0_21"
Flash 11.7.700.169
Looking forward to using the application.
Please Help!
Thanks
Pablo

Hello ,
I am atttempting to run CCP2.6 and have tried clearing cache on IE (temp internet/website files, cookies, history) and removed all Java files including trace/log files, chaced apps and applets , and installed apps and applets.Also ran CCP as admin.
But I still get the error below and the bottom 2/3 of the CCP screen is not displayed/rendered. Content is only rendered within a sliver of entire window size , at top part of the window. It appears as if Java should be rendering content at mid/bottom section of window but never does, although a tempory splash screen does appear as if it is "attempting".
netscape.javascript.JSException: No such method "invokeLaunchDashboard" on JavaScript object
at sun.plugin2.main.client.MessagePassingJSObject.newJSException(Unknown Source)
at sun.plugin2.main.client.MessagePassingJSObject.waitForReply(Unknown Source)
at sun.plugin2.main.client.MessagePassingJSObject.call(Unknown Source)
at com.cisco.xdm.CounterpointSDMApplet.init(CounterpointSDMApplet.java:310)
at com.sun.deploy.uitoolkit.impl.awt.AWTAppletAdapter.init(Unknown Source)
at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
I am using
System:
Windows 7 SP1
IE10
java version "1.7.0_21"
Flash 11.7.700.169
Looking forward to using the application.
Please Help!
Thanks
Pablo

CS5 Installation and Update issues

I am trying to re-install Photoshop CS5 onto my Win 7 Ultimate System. I know from previously installing it several years ago that there was an issue with installing it with Adobe Raeder on a system. Something to do with folder location issues. I have tried re-installing CS5 and it does install (apparently Reader issue solved(?)). Both 32bit and 64bit seem to install ok. I can open Photoshop and access the program.
Problem: When I try to do updates for the software, that are available, they download and then hang on install. The Adobe installer stops responding and nothing installs.
Could someone pleas assist me with this issue.
Thank You
System Information:
Win 7 Ultimate 64 bit, Service pack 1 and updates installed.
8 Gigs of system memory
1 Terabyte main drive - Photoshop location.
75 GB partion on seperate drive for Photoshop Cahe.
Nvidia GTX460 with 1GB memory
332.21 Nvidia WHQL driver

http://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
Have you tried manually updating?

Has the new Early 2013 Retina Macbook Pro still lag and display issues?

Hello. I've never had a Mac before and I'm thinking of buying the new "early 2013" 15-inch (2.7 Ghz, 16Gb Ram, $2799) Retina Macbook Pro. I live in Argentina but I'm going to NYC in a couple of weeks and I want to get one there. The thing is, that I can not be returning it 2 or 3 times like I read a lot of peple had to, because I'll be coming back home after 2 weeks and here they will only fix it, not replace it for a new one, and that could take months.
So, I want to know if you guys can help me decide if I should go for it or not, if these image retention and burn in and ui lag issues appear to be fixed with this new model or if it is still the same. If I don't buy this one I'll be getting the new Samsung Series 7 Chronos they showed in CES 2013, still not available in the market. Thanks a lot!

huevo_gnr wrote:
I just checked and I have the LG SJA2, too. I didn't notice any Image retention at first, I tested it with the chessboard test for 5 or 6 minutes, it showed no IR. But with 10 minutes I can see a bit of IR. Nothing that can affect the normal use of the computer, I mean I have to put the chessboard for 10 minutes and then change to grey to notice it, but it does exist and is the SJA2 from LG. If it doesn't get worst, I think it doesn't even matter. I just hope it doesn't get worst.
FWIW, I noticed that until I stopped looking at the chessboard before it switched; my eyes had image retention. But in that awfully long thread on the subject, some have insisted that if it's an LG, it's trouble so I guess there's no guarantee. (BTW, I was writing this when you tried the test again - ocular image retention?)
Not to hijack the thread, but shortly after I posted that "good news" about SJA2, my rMBP simply refused to start at all; it was totally inert. Charging, not charging, SMC reset, nothing helped. Tech support's only solution was bring it in to be fixed.
On a hunch, and remembering something about magnets in the top of the display activating a reed switch in the base, probably near the trackpad, I lifted the front of the Mac about 1/4" inch and let it drop. Bingo! The Mac has operated properly so far. I suspect the reed switch was stuck in the wrong position, and some evidence suggests it was that way out of the box and my fix corrected it.

Freezing and display issue

Dear All,
I had this imac from 2010. Now it's creating some issues. Daily when i start this Imac, its freeze on gray screen and its also show scrambled display. But after 5 or 6 time immediate power down and on. I am able to use the operating system. It’s a very strange problem after getting heat or something it able for use. I also reset the smc and Pram reset. I don’t think its operating system problem. Kindly suggest solution which work

This sounds possibly graphics related and sounds as though you are experiencing kernel panics.
Please post a copy of your latest kernel panic in your reply. To find the log, open Console application and look under System Diagnostic Reports. The log will start with "kernel_" and end in ".panic". Post the whole panic report in your reply.

GPMC Crashing and Display issues.

Today I went to open the GPMC on my Windows 8 Desktop and after going to edit a policy we have created all the menu items were blank. I could see the icons for them, but they had no name. After trying to navigate for a few moments MMC Crashes and gives me
this error in event viewer:
Faulting application name: mmc.exe, version: 6.2.9200.16384, time stamp: 0x5010a074
Faulting module name: ntdll.dll, version: 6.2.9200.16420, time stamp: 0x505aaa82
Exception code: 0xc0150010
Fault offset: 0x0007df5e
Faulting process id: 0xfc8
Faulting application start time: 0x01cdb7783eb3c748
Faulting application path: C:\WINDOWS\SysWOW64\mmc.exe
Faulting module path: C:\WINDOWS\SYSTEM32\ntdll.dll
Report Id: 8bacb439-236b-11e2-be6b-984be1ebad9b
Faulting package full name:
Faulting package-relative application ID:
with this information afterwords:
Fault bucket -1088739078, type 1
Event Name: APPCRASH
Response: Not available
Cab Id: 0
Problem signature:
P1: mmc.exe
P2: 6.2.9200.16384
P3: 5010a074
P4: ntdll.dll
P5: 6.2.9200.16420
P6: 505aaa82
P7: c0150010
P8: 0007df5e
P9:
P10:
Attached files:
C:\Users\pomeroyt\AppData\Local\Temp\WER66CC.tmp.WERInternalMetadata.xml
C:\Users\pomeroyt\AppData\Local\Temp\WER6C3B.tmp.appcompat.txt
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\AppCrash_mmc.exe_636e6b2f6e27a9c7f7e820f7a0adb57213626294_05c36ce6
Analysis symbol:
Rechecking for solution: 0
Report Id: 8bacb439-236b-11e2-be6b-984be1ebad9b
Report Status: 1
Hashed bucket: 098ebb650f3c851a055c696107776b03
I'm not really sure where to go from here. Has anyone else had this issue?
Were running a 2008 domain.

I'm also having this problem. Error text from my system below. It's a fresh install of Windows 8, joined to our domain and updated. VMWare Tools was installed automaticaly, but not even antivirus aside from that. It seems I can use most of the
features of the console, I've even succesfully modified a GPO. If I select the comain in the left pane though, guarenteed crash. I've tried rebooting.
Anyone make any progress?
Problem signature:
Problem Event Name:
APPCRASH
Application Name:
mmc.exe
Application Version:
6.2.9200.16496
Application Timestamp:
50ece2e8
Fault Module Name:
gpmgmt.dll
Fault Module Version:
6.2.9200.16518
Fault Module Timestamp:
510ca9a6
Exception Code:
c0000005
Exception Offset:
0000000000154f4b
OS Version:
6.2.9200.2.0.0.256.4
Locale ID:
1033
Additional Information 1:
f5d5
Additional Information 2:
f5d5f2edea5447000260123656b930b4
Additional Information 3:
f883
Additional Information 4: f883ee6437fb5cbaf147d7c9ea29db21

Java and Display Issues in Plus

Hi everyone
Please reply whether you have or have not seen any of the following:
I'm working on a client site where we have some machines working just fine and others are giving corbaserver errors. Copying data from a worksheet into Excel using CTRL-C | CTRL-V does not seem to work for some machines and so they have to use the Copy and Paste buttons. Curiously, when they do this they get an additional empty column whereas on the machines where CTRL-C | CTRL-V works they don't get the blank column.
The other issue we are seeing is that after a short period of time, Plus stops running the queries automatically. Any change the user makes, such as adding a new item, adding a sort, moving a column position does not take effect until the Refresh button is clicked.
There is a combination of IE6 and IE7, with all machines being XP with most on SP2 and many on SP3.
I am suspicious of the XP SP3 when combined with IE7 but would like to know whether anyone else has experienced issues. We are running 10.1.2.3 with CP4 and our Java is Sun 1.6.0_15
Please reply with either a we are having no problems with this combination or whether you have noticed similar issues. If you have seen issues and got a fix or workaround please let me know. I'm also interested in knowing which combination of Java, Discoverer, operating system and IE works for you.
Best wishes
Michael

Michael,
Our production server was recently upgraded to 10.1.2.3, CP5 with Java 1.4.2_06. Prior to this upgrade we recommended that users function with I.E. 6.0 and Firefox 2.0. We experienced issues with later browser versions. On my personal workstation I have Windows XP, SP2, I.E. 6.0, Firefox 2.0 and now Java 1.6.0_16. We are now testing the later version of Java on our test OAS. And we are testing out the later browser versions as we speak. The first thing that I would recommend is to add the Java Runtime parameter of -Xmx256M, in the Java Control Panel. I had some session locks prior to my adding this parameter. I am testing access to both servers with Java 6 installed on my workstation. Access to Java 6 performed better after I added the runtime parameters. Access to Java 4 with I.E. gives a warning message and performs very slowly. Mozilla Firefox does to seem to care, no warning and similar performance as Java 6 on the server side. I have not done very much testing with I.E. 7.0 and Firefox 3.0 as of yet with the newer Java version. I am now accessing that environment and it is running very slowly. Part of the issue may be my PC performance but I do not like what I see. Way too slow. This is the browser functionality not the workbook execution time. I added the Java Runtime parameter of
-Xmx256M and it now performs better.
I did the Ctrl-C|Ctrl-V with both I.E. and Firefox and did not experience the problem you discribed. I aslo did not encounter the other problems that you reported. We the corbaserver errors in a Discoverer pop-up window, Java Console or OEM session log?
You may be correct with the SP3 as being at least one of the culprits. I do not have that patch on either workstation so I cannot test for you.
Jerre

PDF preview and display issue : NWDS CE 7.1 SP05+ALD 7.1

Hi All
I am creating a webdynpro java application in NWDS 7.1 SP 05. This application has an interactive form ui element. The livecycle designer version is 7.1 and reader versions tried are 8 and 9.
The issue is that the pdf preview in NWDS is blank and also I am getting blank white space instead of the form when i deploy the application on a browser.
I have used NWDS 7.1, SP05 + ALD 7.1 combination on another system and there i can see the form in NWDS pdf preview.
I am completely stuck, please let me know of any way out.
Thanks
Lisha

Hi,
Try to uninstall adobe life cycle designer and install it onceagain..
Even we faced some times this problem, but better to use higher version of adobe life cycle designer like 8.0 whiuch will be compatible to your NWDS version...
Hope this helps you in resolving the problem...
Regards,
Saleem

Linux installation and display issues

Similar Messages

Maybe you are looking for