Linux Migration 11.5.10.2
We are planing moving our 11.5.10 with 10g RAC from Solaris to Linux, and I would like to hear from anyone who's done it already this kind of OS-OS migration, or knows of any good white papers which discuss it.
I have gone through my Threads in this forums but i did not see anyone discussed on RAC Migration.
Hi Chrle,
Could you please refer me any metalink documents to check pre_req's in new servers for RAC installation.This is covered in the installation document (which can be found in the link referenced above).
Not sure what Linux version you are planning to use, but if it is OEL/RHEL 5 then you could also refer to:
Requirements For Installing Oracle 10gR2 On RHEL/OEL 5 (x86) [ID 419646.1]
10gR2 RAC Install issues on Oracle EL5 or RHEL5 or SLES10 (VIPCA / SRVCTL / OUI Failures) [ID 414163.1]
Thanks,
Hussein
Similar Messages
-
UCCX windows to linux migration
Hi,
what data is migrated with using Pre-upgrade tool (windows to linux migration tool)?
I am concerned about hitorical data, is whole historical data migrated?
Migration from UCCX 7.0(1)SR5 to 8.0.
Regards,
WojciechHi,
Accoding to the uccx 8.0.2 upgrade guide I see that Phase 2 of the windows to linux upgrade includes resotring historical reporting (HR) data and recordings (audio files)
So the answer is yes
http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/crs/express_8_0/installation/guide/uccx802ug.pdf
page 21
Regards,
Christos -
Hello,
I'm interested in performing a move of our ZCM 11 primary server from the
Windows 32 bit platform to Linux running 64 bit. Does anyone know where
I might find any documentation of guidelines on this process?
PaulOn 03/02/2015 20:18, Paul wrote:
> I'm interested in performing a move of our ZCM 11 primary server from the
> Windows 32 bit platform to Linux running 64 bit. Does anyone know where
> I might find any documentation of guidelines on this process?
Whilst you say you want to move your "ZCM 11" server what's the exact
version of ZENworks that you're running?
Am I right in thinking that the move to 64-bit may be related to wanting
ZENworks 11 SP3?
Which OS (and version) do you have in mind for your (target) Linux server?
Whilst ZENworks only supports migrations between servers that have the
same OS (so Windows Server to Linux is not supported) that doesn't mean
it's not possible. Knowing the current and target versions will help us
advise further.
HTH.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks. -
Windows to Linux Migration advantages for 10gR2 database
Hi
My client currently on windows environment,
now they want to migrate OS to linux.
So kindly help me to identify the advantages of migration to linux.
Regards
Shaik833192 wrote:
Security wise what are the advantages available in Linux comparing with windows?Not to say that Linux is not targeted. But the basic advantage is that less attacks are aimed at Linux, than Windows. The latter is the de facto desktop o/s and as such is the taller tree that catches more of the wind and weather.
Besides that, both o/s's needs hardening after installation. Like Windows, Linux has a feature set that protects privilege programs against attacks (data/code injection) by unprivileged programs. It is called SELinux where SE stands for Security Enhanced.
Linux's default firewall is iptables and IMO a far better piece of software than the default Windows firewall. I even use iptables as a NAT load balancer for RAC.
How good security is, is however not about how "good" the o/s is. It is about how well you understand the risks. It is about how well you address these risks.
In other words, the only safe server is one without a stiffy drive, tape drive, DVD/CD drive, without any NICs, locked in a vault and thrown into the Puerto Rico Trench in the Atlantic ocean. ;-)
Any specific advantages are there for maintaining oracle database on linux environment?That would be a major issue in my environment. The Oracle servers I support are scattered across a very wide area and 1000's of km apart.
I need things like access (via various firewall) to Oracle servers, the ability to tunnel connections, persistent console sessions, a means to run GUI programs, powerful shell scripting, the ability to dynamically load and unload kernel drivers and a host more...
And Linux does this the best for me.
Disadvantages of windows for maintaining oracle database?That again depends on your environment and requirements. There are many Oracle sites that are very happily running Windows.
In my environment - Windows would be a major limitation. For example, in order for db-to-db connectivity across networks I've written a shell script that creates a tunnel between these servers, and configured that script as a kernel respawn daemon - meaning that should the tunnel die and script terminate, the kernel will detect that and auto restart the script. (Oracle RAC's high availability daemon is run the same way on Linux)
To do this in Windows? The Windows o/s is like a car with the hood of the car welded shut. So it requires a lot more effort to get certain things done and working. With Linux this is not the case. Heck, you can even build a kernel that are custom tailored for running your Oracle database and storage/network/interconnect drivers and nothing else. With Windows, just changing the HAL is a big deal.
The usual reaction I get when saying that we use Linux is along the lines of "+Linux is not as robust and scalable as heavy weight commercial o/s like Windows or Solaris or <insert-name-here>+".
And in actual fact, the reverse is true. The only robust and scalable o/s on this planet is Linux - if we go according to Top500.org that lists the o/s families of the biggest, baddest and fastest super computers in the world. 459 out of these 500 are running Linux. That is 91.8% of the world biggest and fastest clusters. A mere 5 (1%) are using Windows.
Bottom line is that Linux is more than just capable. It is not inferior to Windows - especially not when vast majority of the most advance computer systems in the world are running Linux and not Windows. -
Weblogic SQLServer JDBC error during Solaris to Linux migration
We are in process of migrating our app from weblogic 92 on solaris to weblogic 92 on linux. Our app connects to a SQLServer db (SQL Server 2005) using a weblogic datasource configured with the weblogic sqlserver jdbc driver (weblogic.jdbc.sqlserver.SQLServerDriver)
But we are getting the following error on linux, whereas the same code works fine in solaris:
*[BEA][SQLServer JDBC Driver][SQLServer]The server failed to resume the transaction. Desc:3d00000019.*
The <Desc:xxxx>keeps changing but rest of the error message remains the same. Any suggestions?
I have tried searching the weblogic jdbc forums but no luck.Is this the same DBMS as is used in the working configuration?
I'd like to see the whole stacktrace.... -
Windows to Linux Migration for Apps Server - 11.5.10
Hello all,
Am trying to migrate our app server from WIndows 2000 to RH Linux. Am using the metalink doc id 238276.1 for this. Am encountering an error
"RC-00216: The Context File does not exist. Exiting."
Am not able to proceed any further. Have verified file path and permissions. Have setup some parts of the environment on the target with path for AD_TOP, APPL_TOP, CONTEXT etc.
Has anyone completed such a migration successsfully? Any pointers will be greatly appreciated.
Regards,
VijayHi Vijay,
Yes I have.
What is the java and perl version being used?
1 - which java
2 - java --version
3 - which perl
4 - per --version
The contextfile has been copied from the windows system does it have the correct permissions? Open the file and check if you see ^M (they should not exist)
You are executing the command as follows:
perl /data/hrtc/hrtcappl/ad/11.5.0/bin/adclonectx.pl migrate java=/usr contextfile=/data/hrtc/hrtcappl/admin/hrtc1_hrdev.xml
try:
cd /data/hrtc/hrtcappl/ad/11.5.0/bin/
perl adclonectx.pl migrate java=/usr contextfile=/data/hrtc/hrtcappl/admin/hrtc1_hrdev.xml
Also the location of JDK_TOP (/usr) seems a bit strange to me.....as I would expect something like /usr/jdk1.3.x/
Thanks!
KAR -
Z/OS to z/Linux migration problems.
Hello,
We had written an Enterprise Java application (EAR file) that was running on z/OS on the mainframe. It uses mappoint web service and it used to run fine.
Now we're moving the application to z/Linux. We have z/Linux images running as virtual machines on the mainframe. When the same application is run on z/Linux we get an unauthorized access. The authentication is failing.
Here are the details:
Original setup:
OS: z/OS on IBM mainframe.
Language: Enterprise Java.
New setup:
OS: z/Linux virtual machines on IBM mainframe.
Language: Enterprise Java.
Please let me know if you need any additional details.
Thank you.
Buzios Brazil
bus toronto niagara fallsWell, you have certainly landed in the wrong place here to post your question. Assuming the Linux you are running on your mainframe is a SLES version, then you should post in one of the SLES forums:
SUSE Linux Enterprise Server (SLES) - NOVELL FORUMS -
Mainframe to Linux migration of DB2 queries
Hi,
I wish to know the list of SQL query changes between DB2 Mainframe and DB2 Linux environments.
Thanks in advance for your help.
Regards,
Ashok.980405 wrote:
Hi,
I wish to know the list of SQL query changes between DB2 Mainframe and DB2 Linux environments.
Thanks in advance for your help.
Regards,
Ashok.consider finding & posting this issue on a DB2 forum; not this ORACLE forum -
Adrelink.sh fails after 32bit to 64bit migration Linux
You are running adrelink, version 120.43
Start of adrelink session
Date/time is Wed Dec 18 17:34:08 IST 2013
Log file is /u01/EBS11/R12/appl11/apps/apps_st/appl/admin/log/adrelink.log
Command line arguments are
"force=y" "ad all"
Operating System Information (output of 'uname -a'):
Linux migrate.evosys.co.in 2.6.32-300.10.1.el5uek #1 SMP Wed Feb 22 17:37:40
EST 2012 x86_64 x86_64 x86_64 GNU/Linux
Backup Mode is "file"
Removing extra variables from the environment...
adrelink will save the following variables (if set):
- Generic:
"PATH ORACLE_HOME TMPDIR TZ APPL_TOP APPLFENV PLATFORM LD_LIBRARY_PATH COBDIR
LIBPATH NLS_LANG JAVA_TOP PERL5LIB"
- Shell-Specific: "PS1 PS2 PS3 PS4 IFS MAILCHECK _ LOGNAME A__z"
Beginning pass 1.
Processing 361 environment variables...
349 removed; 12 saved.
Beginning pass 2.
Processing 12 environment variables...
0 removed; 12 saved.
Done removing extra environment variables.
Removing Application products' bin directories from PATH ...
Done removing Application products' bin directories from PATH
Reading Oracle Applications environment file
Your Oracle Applications environment file is
/u01/EBS11/R12/appl11/apps/apps_st/appl/EBS11_migrate.env
Removing $FND_TOP/$APPLBIN from PATH ...
Done removing $FND_TOP/$APPLBIN from PATH
Removing extra variables from the environment (again)...
adrelink will save the following variables (if set):
- Generic:
"PATH ORACLE_HOME TMPDIR TZ LD_LIBRARY_PATH COBDIR LIBPATH NLS_LANG JAVA_TOP
PERL5LIB"
- Shell-Specific: "PS1 PS2 PS3 PS4 IFS MAILCHECK _ LOGNAME A__z"
Beginning pass 1.
Processing 338 environment variables...
329 removed; 9 saved.
Beginning pass 2.
Processing 9 environment variables...
0 removed; 9 saved.
Done removing extra environment variables (again).
Re-reading critical environment variables ...
Done re-reading critical environment variables
ORACLE RDBMS Version 10.1.0.5.0
Oracle Reports Version 10.1.2
Oracle Applications Release 12
Current product is AD
LADLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/lib/libad.a
Current product is ALR
LALRLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/alr/12.0.0/lib/libalr.a
Current product is AP
LAPLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/ap/12.0.0/lib/libap.a
Current product is AR
LARLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/ar/12.0.0/lib/libar.a
LARSRW is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/ar/12.0.0/lib/xirar.o $(LARLIB)
Current product is BOM
LBOMLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/bom/12.0.0/lib/libbom.a
Current product is CRP
LCRPLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/crp/12.0.0/lib/libcrp.a
Current product is CZ
LCZLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/cz/12.0.0/lib/libcz.a
Current product is DDR
adrelink: Warning: not setting LDDRLIB
since /u01/EBS11/R12/appl11/apps/apps_st/appl/ddr/12.0.0/lib/libddr.a does
not exist
or cannot be read.
Current product is DPP
adrelink: Warning: not setting LDPPLIB
since /u01/EBS11/R12/appl11/apps/apps_st/appl/dpp/12.0.0/lib/libdpp.a does
not exist
or cannot be read.
Current product is DT
LDTLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/dt/12.0.0/lib/libdt.a
Current product is ENG
LENGLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/eng/12.0.0/lib/libeng.a
Current product is FA
LFALIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/fa/12.0.0/lib/libfa.a
LFASRW is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/fa/12.0.0/lib/xirfa.o $(LFALIB)
Current product is FEM
LFEMLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/fem/12.0.0/lib/libfem.a
Current product is FF
LFFLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/ff/12.0.0/lib/libff.a
Current product is FND
LFNDLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a
LFNDSRW is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/fnd/12.0.0/lib/xirfnd.o $(LFNDLIB)
Current product is FTP
LFTPLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/ftp/12.0.0/lib/libftp.a
Current product is GL
LGLLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/gl/12.0.0/lib/libgl.a
Current product is GMA
LGMALIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/gma/12.0.0/lib/libgma.a
Current product is GMF
LGMFLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/gmf/12.0.0/lib/libgmf.a
Current product is GML
LGMLLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/gml/12.0.0/lib/libgml.a
Current product is IBY
LIBYLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/iby/12.0.0/lib/libiby.a
Current product is INL
adrelink: Warning: not setting LINLLIB
since /u01/EBS11/R12/appl11/apps/apps_st/appl/inl/12.0.0/lib/libinl.a does
not exist
or cannot be read.
Current product is INV
LINVLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/inv/12.0.0/lib/libinv.a
Current product is IZU
adrelink: Warning: not setting LIZULIB
since /u01/EBS11/R12/appl11/apps/apps_st/appl/izu/12.0.0/lib/libizu.a does
not exist
or cannot be read.
Current product is MRP
LMRPLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/mrp/12.0.0/lib/libmrp.a
Current product is MSC
LMSCLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/msc/12.0.0/lib/libmsc.a
Current product is MSO
LMSOLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/mso/12.0.0/lib/libmso.a
Current product is MSR
LMSRLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/msr/12.0.0/lib/libmsr.a
Current product is MST
LMSTLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/mst/12.0.0/lib/libmst.a
Current product is MTH
adrelink: Warning: not setting LMTHLIB
since /u01/EBS11/R12/appl11/apps/apps_st/appl/mth/12.0.0/lib/libmth.a does
not exist
or cannot be read.
Current product is MWA
LMWALIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/mwa/12.0.0/lib/libmwa.a
Current product is PA
LPALIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/pa/12.0.0/lib/libpa.a
Current product is PAY
LPAYLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/pay/12.0.0/lib/libpay.a
Current product is PO
LPOLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/po/12.0.0/lib/libpo.a
LPOSRW is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/po/12.0.0/lib/xirpo.o $(LPOLIB)
Current product is PON
LPONLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/pon/12.0.0/lib/libpon.a
Current product is QPR
adrelink: Warning: not setting LQPRLIB
since /u01/EBS11/R12/appl11/apps/apps_st/appl/qpr/12.0.0/lib/libqpr.a does
not exist
or cannot be read.
Current product is RG
LRGLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/rg/12.0.0/lib/librg.a
Current product is RRS
adrelink: Warning: not setting LRRSLIB
since /u01/EBS11/R12/appl11/apps/apps_st/appl/rrs/12.0.0/lib/librrs.a does
not exist
or cannot be read.
Current product is WIP
LWIPLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/wip/12.0.0/lib/libwip.a
Current product is WPS
LWPSLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/wps/12.0.0/lib/libwps.a
Current product is WSM
LWSMLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/wsm/12.0.0/lib/libwsm.a
Current product is XDP
LXDPLIB is set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/xdp/12.0.0/lib/libxdp.a
LUSRLIB is /u01/EBS11/R12/appl11/apps/apps_st/appl/fnd/12.0.0/usrxit/libusr.a
Not linking Oracle Applications with any Oracle mail product
LALRSTUB is now set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/alr/12.0.0/lib/alstub.o
MAILLNK is now set to
/u01/EBS11/R12/appl11/apps/apps_st/appl/alr/12.0.0/lib/alstub.o
Creating prefix makefiles ...
adrelink: Warning - Cannot read $ORACLE_HOME/forms/lib32/env_forms.mk.
Full pathname is
"/u01/EBS11/R12/appl11/apps/tech_st/10.1.2/forms/lib32/env_forms.mk"
You cannot link the executable "f60webmx" in product
"Application Object Library" without this file.
Please verify that you have correctly installed Oracle Forms
Version 6.0 in your $ORACLE_HOME directory.
Continuing with adrelink...
adrelink: Warning - Cannot read $ORACLE_HOME/forms/lib32/ins_forms.mk.
Full pathname is
"/u01/EBS11/R12/appl11/apps/tech_st/10.1.2/forms/lib32/ins_forms.mk"
You cannot link the executable "f60webmx" in product
"Application Object Library" without this file.
Please verify that you have correctly installed Oracle Forms Version 6.0
in your $ORACLE_HOME directory.
Continuing with adrelink...
adrelink: Warning - Cannot read $ORACLE_HOME/reports/lib32/env_reports.mk.
Full pathname is
"/u01/EBS11/R12/appl11/apps/tech_st/10.1.2/reports/lib32/env_reports.mk"
You cannot link the executable "ar60run" (or "ar60runb", or "ar60desb")
in product "Application Object Library" without this file.
Please verify that you have correctly installed Oracle Reports 10.1.2
in your $ORACLE_HOME directory.
Continuing with adrelink...
adrelink: Warning - Cannot read $ORACLE_HOME/reports/lib32/ins_reports.mk.
Full pathname is
"/u01/EBS11/R12/appl11/apps/tech_st/10.1.2/reports/lib32/ins_reports.mk"
You cannot link the executable "ar60run" (or "ar60runb", or "ar60desb")
in product "Application Object Library" without this file.
Please verify that you have correctly installed Oracle Reports 10.1.2
in your $ORACLE_HOME directory.
Continuing with adrelink...
Done creating prefix makefiles
Starting link of product 'ad' on Wed Dec 18 17:34:13 IST 2013
Current product is ad
Current product _TOP is $AD_TOP
Current prodarea is /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0
Making a list of all executables in $AD_TOP/bin...
Done making executable list.
Backing up or removing executables...
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adadminnew
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adadmin.bak
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adcfginfo.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adchkcfg.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adchkutl.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adclone.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adconfig.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adctrlnew
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adctrl.bak
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adcustomizer.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adcustupld.pl
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adcvm.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adgensgn.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adgetlnxver.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adlibin.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adlibout.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adogdgen.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adownmt.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adpatchnew
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adpatch.bak
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adpatchnew.bak
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adproc.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adrelinknew.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adrelink.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adsctest.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adshell.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adsplicenew
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adsplice.bak
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adtmplreport.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adtopgen.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/aducsifm.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/aducssp.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adunload.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adutils.sh
rm -f /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adworker.bak
Done backing up or removing executables.
Relinking all modules in product ad ...
make -f /u01/EBS11/R12/appl11/apps/apps_st/appl/admin/out/link_ad_13405.mk all
Starting link of all ad executables on Wed Dec 18 17:34:13 IST 2013
cc You_need_to_edit_adrelink_to_set_LDFLAGS -o
/u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adaimgr.new
/u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/lib/aimain.o \
/u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/lib/libad.a
/u01/EBS11/R12/appl11/apps/apps_st/appl/fnd/12.0.0/lib/libfnd.a -lsql10
-lclntsh `cat /u01/EBS11/R12/appl11/apps/tech_st/10.1.2/lib/ldflags`
-lnsslb10 -lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/u01/EBS11/R12/appl11/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10
-lvsn10 -lcommon10 -lgeneric10 -lmm -lcore10 -lxml10 -lunls10 -lsnls10
-lnls10 -lcore10 -lnls10 `cat
/u01/EBS11/R12/appl11/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lnro10 `cat
/u01/EBS11/R12/appl11/apps/tech_st/10.1.2/lib/ldflags` -lnsslb10
-lncrypt10 -lnsgr10 -lnzjs10 -ln10 -lnnz10 -lnl10 -lclient10 -lnnetd10
-lvsn10 -lcommon10 -lgeneric10 -lcore10 -lxml10 -lunls10 -lsnls10 -lnls10
-lcore10 -lnls10 -lclient10 -lnnetd10 -lvsn10 -lcommon10 -lgeneric10
-lcore10 -lxml10 -lunls10 -lsnls10 -lnls10 -lcore10 -lnls10 `cat
/u01/EBS11/R12/appl11/apps/tech_st/10.1.2/lib/sysliblist` -ldl -lm -lpthread
cc: You_need_to_edit_adrelink_to_set_LDFLAGS: No such file or directory
make: *** [/u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin/adaimgr]
Error 1
Done with link of all ad executables on Wed Dec 18 17:34:13 IST 2013
Relink of all modules failed.
See error messages above (also recorded in log file) for possible
reasons for the failure. Also, please check that the Unix userid
running adrelink has read, write, and execute permissions
on the directory /u01/EBS11/R12/appl11/apps/apps_st/appl/ad/12.0.0/bin,
and that there is sufficient space remaining on the disk partition
containing your Oracle Applications installation.
Done with link of product 'ad' on Wed Dec 18 17:34:13 IST 2013
adrelink is exiting with status 1
End of adrelink session
Date/time is Wed Dec 18 17:34:13 IST 2013
"already we edited adrelinknew.sh with CPP_LDFLAGS=' -L$(ORACLE_HOME)/lib -L$(ORACLE_HOME)/lib/stubs -lclntsh -Wl,--noinhibit-exec'"
Linux:5.8 64-bit
database: 11.1.0.7
Application: R12.1.1
Do the needfull,
Thanks in advance.Hi Yoonas,
i already edited adrelinknew.sh. and per above mentioned doc Linux
make -f /u01/EBS11/R12/appl11/apps/apps_st/appl/admin/out/link_ad_13405.mk all this make is failing.
as per above mentioned doc i have verified $APPL_TOP/admin/adpltfrm.txt and envinromentfile
both contain same for Platform : LINUX_X86-64.
so is there any other files or settings do i need to perform.
Thanks, -
Migration to Arch Linux without extra partition requirement
Hello every body.
I'm currently making somes linux migration distribution, which means, installing on the current root partition Arch Linux and then having the possibility to switch from one to the other one just like you would have 2 distros on separate partitions. As you can imagine it's a interesting challenge. For me it is a must since I do not have any disk free needer want to create any new partitions. Moreover, the all process is possible to be done remotetly.
They is an available detail explaination how I proceed at http://kiao.no-ip.info/depot/arch.
Just be aware it is continuously updated as I'm doing the migration.
Any comment are welcome
Thierry
Last edited by kiao (2007-07-10 12:26:30)Have you looked at the wiki for installing the arch32 bit enviornment on arch64 ?
I think it's basically a decription of what your wanting to do. Even though it was written for just adding a minimal 32 bit install within arch 64, you could use the steps to install a complete sytem within another.
http://wiki.archlinux.org/index.php/Arc … bit_system -
Hi all: I will soon be migrating an OES2sp3 server to OES11sp1. I have read through the migration docs but still I have a few questions I need answered/clarified.
1. When installing OES11 on the target server, I have to give it a name and bring it into the tree. When the migration takes place, will all instances of the target server, both in OES and SLES, get renamed to that of the source server? Most notably the internal server CA_default certificate, which gets named during OES installation.
2. Prior to migration and docs say to create the driver store and print manager on the target server. Do I just give them a temp name as the transfer ID task will rename everything when it runs?
3. The server being migrated is our CA server. My plan was to move the CA to a different server temporarily to another OES server, and once the migration is finished, move it back. Does that seem reasonable?
Thanks, Chris.I hate when I do that.
>>> smflood<[email protected]> 12/12/2013 6:06 PM >>>
cmosentine;2297649 Wrote:
> Hi all: I will soon be migrating an OES2sp3 server to OES11sp1. I have
> read through the migration docs but still I have a few questions I need
> answered/clarified.
Given that you are asking about migrating from OES2 SP3 to OES11 SP1
then I suggest reposting in the OES11 (Linux) Migration forum @
https://forums.novell.com/novell-pro...oes-migration/
as this is a NetWare-related forum.
HTH.
Simon
Novell Knowledge Partner
If you find this post helpful and are logged into the web interface,
please show your appreciation and click on the star below. Thanks.
smflood's Profile: https://forums.novell.com/member.php?userid=617
View this thread: https://forums.novell.com/showthread.php?t=473395 -
Migration / Upgrade process
Environment:
Existing GroupWise 8.02hp3 (all agents and monitor w/ messenger w/ GWAVA) on
physical server running 32-bit OES2sp2. There is a single domain (only 65
users), single PO, single GWIA and single WebAccess.
I also have a BES server (5.0.1) as a VM, and mobility sync server running
on a physical machine (but planning to virtualize it as well).
Target:
I would like to run everything virtualized (though that isn’t the thrust
of the problem) GroupWise 2012 on a VMware virtual machine running 64-bit
OES11 with GWAVA running on a separate virtual appliance.
Here is what I think I need to do:
1. Install the OES 11 server (as a VM).
2. Migrate GW 8 to the new OES 11 server. (The migration utility, does it
work for Linux to Linux migration?)
3. Make sure things for the BES and mobility sync server are running
correctly (setting changes, etc.).
4. Install GWAVA 6 appliance and get it functioning correctly
5. Upgrade to GW 2012.
This is a simplified outline, but have I got it anywhere close to right?
What changes do I need to make in this plan? What "gotchas" do I need to
look out for? Should I consider separating out any of the GW functions onto
other VM’s (for potential growth) or keep it all together?Daniel,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Migrating OLAP From 32 To 64 Bits
Hii.,
Im upgrading my Apps from 11.5.10.2 to 12.1.3, also Database is upgrading from 10.2.0.5 to 11.2.0.2.
After that i'l migrate it from 32 bit linux to 64 bit EL 5.
For migration i'l be following the note Migrating Oracle E-Business Suite R12 from Linux 32-bit to Linux 64-bit [ID 471566.1],
As mentioned in the note, *is it necessary for me to Migrating OLAP From 32 To 64 Bits like the steps mentioned in Migrating OLAP From 32 To 64 Bits [ID 352306.1].*
Or can i skip the OLAP migration.
Can anyone help me in this..
Waiting for your suggestions.Kindly reply.
Thanks in advanceHi;
Similar issue mention at below link:
How To Find Out If OLAP is Being Used And How To Remove OLAP (Doc ID 739032.1
10g database on 32 bit linux migration to 64 bit linux on 11g
I belive its better to go wiht SR for confirm OLAP issue. It could be great if you share what they suggest here
Regard
Helios -
Autoconfig failed after migration
autoconfig failed with below errors.
AutoConfig could not successfully execute the following scripts:
Directory: /euu01/app/euapplqa1/euqacomn/admin/install/EUQA_euebsappqa201
txkMultinode.sh INSTE8_SETUP 1
wdbsvr.sh INSTE8_SETUP 1
[PROFILE PHASE]
AutoConfig could not successfully execute the following scripts:
Directory: /euu01/app/euapplqa1/euqacomn/admin/install/EUQA_euebsappqa201
abmwebprf.sh INSTE8_PRF 1
affrmprf.sh INSTE8_PRF 1
afwebprf.sh INSTE8_PRF 1
amswebprf.sh INSTE8_PRF 1
ibywebprf.sh INSTE8_PRF 1
icxwebprf.sh INSTE8_PRF 1
jtfictx.sh INSTE8_PRF 1
oksfrmprf.sh INSTE8_PRF 1
The following error is in most of the scrips.
ERROR:
ORA-12154: TNS:could not resolve service name
Thanks in advanceAIX to LINUX migration at the apps
yes it is RAC DB. we are able to connect to apps from apps tier to DB. see below results.
[euapplqa1@euebsappqa201 EUQA_euebsappqa201]$ sqlplus apps
SQL*Plus: Release 8.0.6.0.0 - Production on Wed Apr 6 10:34:30 2011
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
SQL> exit
Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
[euapplqa1@euebsappqa201 EUQA_euebsappqa201]$ sqlplus apps@EUQA
SQL*Plus: Release 8.0.6.0.0 - Production on Wed Apr 6 10:34:53 2011
(c) Copyright 1999 Oracle Corporation. All rights reserved.
Enter password:
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options -
Migration from Oracle 8i/Windows to Oracle 11g/Solaris
Hi,
We got an client requirement to migarte the Oracle 8i/Windows 2000 platform to Oracle 11g/Solaris platform.
Whether anyone involed in migartion of windows to solaris.Also i would like to know the feasible steps for migarting.
Please help out.
With regards,
SuryaHi,
Please refer to (Note: 238276.1 - Migrating to Linux with Oracle Applications Release 11i) to migrate the application tier. For the database tier, use export/import and upgrade the database then -- Please see old threads for similar discussion.
Linux Migration
http://forums.oracle.com/forums/search.jspa?threadID=&q=238276.1&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein
Maybe you are looking for
-
What is easiest way to set up a remote network between countries online?
What is easiest way to set up a remote network between countries online? My main Mac is in England, UK and I'm spending time in the USA with my Mac laptop for 3 months. I'm in the USA right now, but neighbour in the UK has keys to my apartment so he
-
Windows Vista: Bluescreen with iTunes
Installed iTunes 7.02 on Windows Vista (RTM) and wanted to import the XML library which I exported before on XP. result is a Windows Vista Blue screen. A I also do get a blue screen when just importing a larger folder into the library (one or two fol
-
How to cummulate sales orders for creating one planned order.
Hello friends, My scenario is make to stock. I use sales orders for creating plan only. I want to cummulate all sales orders of one finish material and create one planned order for that material when i run mrp. How can i do this? Thanks
-
Java.lang.VerifyError with JDK1.3.1_02
Hi all, I was using a third part ".jar" in my application and I started getting a java.lang.verifyError. I was wondering what are the various reasons that can cause this error to show up. I have jotted down the possibilities I can think of, but due t
-
Does Garageband add compression when it mixes down?
I was wondering if, when you've finished your recordings and you export to an .aiff file Garageband does any default peak-level compressing (or indeed low-volume-level upping) as part of the overall process? I've never noticed any in terms of the dif