Linux : Oracle 8.1.5 and JDK 1.2
Hi!
I want to access Oracle 8.1.5 with JDBC.
I have seen that ODBC for 8.1.5 only works with JDK 1.0.* and 1.1.*, but not with
1.2.*
A JDK 1.2 - driver is only available for Oracle 8.1.6.
The other driver which was proposed before (from http://www.openlinksw.com/) only runs under Windows, not under Linux.
So the only thing I could do is:
a) Use Oracle 8.1.6 -> is it available for Linux, if yes, where can I find it (or an Upgrad for 8.1.5)
b) Use JDK 1.1.* -> (I do not want to do this ...)
c) Find another third-party driver for JDK 1.2 under Linux -> does anyone know where I could get one?
If anyone knows a solution for a-c, can you please answer?
Thanks,
Alex
null
Oracle8iR2's JDBC works fine with Oracle8.1.5.
You can download the new JDBC driver.
null
Similar Messages
-
Oracle 8.1.5 and JDK 1.2 Thin Driver
We are doing some prototyping with Oracle 8.1.5, BEA WebLogic
6.1, and JDK 1.3. We needed to know what is the latest version
supported by the oracle thing client drivers for that
configuration.
Or are we the only users doing this and is it mandatory that we
migrate to Oracle 8.1.7?
Thanks,
Nikhil Kumar
Lead Architect
Delta Dental Plan of Michigan
[email protected]Check out the SQLJ FAQ at:
http://technet.oracle.com/tech/java/sqlj_jdbc/htdocs/faq.html
"ExceptionInInitializerError: NullPointerException"
(This is likely a general configuration issue, not something specific to your code.)
If you see the following stack trace:
unexpected error occurred... java.lang.ExceptionInInitializerError: java.lang.NullPointerException
at sqlj.framework.ClassFileReader.attribute_info(Compiled Code) ...
at sqlj.tools.Sqlj.statusMain(Compiled Code)
at sqlj.tools.Sqlj.main(Sqlj.java:117)
then you are likely running SQLJ version 8.1.5 or earlier under JDK 1.2.x or later.
You need to download the SQLJ 8.1.6 SDK patch, which contains a new translator.zip
version that you can use to replace the translator.zip from 8.0.5/7.3.4 or from JDeveloper 3.0.
null -
We work on Unix Solaris 2.7, Oracle 8.1.5
and a JDK 1.1.8.
We'd like to upgrade to JDK 1.2.2 .
Is it enough to change the only drivers , using the 8.1.6.0.1 release (jdbc816jdk12-sol_01.zip+ nls_charset12_01.zip ) ??
Or should I apply other upgrades from 8.1.5 to 8.1.6 ???Oracle8iR2's JDBC works fine with Oracle8.1.5.
You can download the new JDBC driver.
null -
Oci_jdbc: Oracle 8.0.5 and JDK 1.2.2
Hi,
I am trying to connect to Oracle 8.0.5 using JDK 1.2.2, both
running on the same AIX server. When 8.0.5 was installed there
were no Java components installed, so as suggested by someone I
copied the jdbc directory(which has the class12.zip) and
libocijdbc8.so to oracle/lib from a test install we have of 8.1.7.
I have set the CLASSPATH, LD_LIBRARY_PATH, and LIBPATH to point to
the classes12.zip and libocijdbc8.so. Looking at the Oracle JDBC
faq these versions of the drivers are needed from JDK 1.2.2. I
have run the JdbcCheckup.java program and get the following error.
I tried using the thin client but it can't find a listener object
or something similar. I have included the error generated below.
Any help would be appreciated to get this running as deadlines are
drawing near and this is the only part holding up the project.
Thanks,
Michael Chernecki
ADAPSYS L.P.
Please enter information to test connection to the database
Connecting to the database...Connecting...
Exception in thread "main" java.lang.UnsatisfiedLinkError: no
ocijdbc8 in java.library.path
at
java.lang.ClassLoader.loadLibrary(ClassLoader.java:1251)
at java.lang.Runtime.loadLibrary0(Runtime.java:473)
at java.lang.System.loadLibrary(System.java:771)
at
oracle.jdbc.oci8.OCIDBAccess.logon(OCIDBAccess.java:228)
at oracle.jdbc.driver.OracleConnection.<init>
(OracleConnection.java:246)
at
oracle.jdbc.driver.OracleDriver.getConnectionInstance(OracleDriver
.ja
va:365)
at
oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:260)
at
java.sql.DriverManager.getConnection(DriverManager.java:459)
at
java.sql.DriverManager.getConnection(DriverManager.java:139)
at JdbcCheckup.main(JdbcCheckup.java:35): The only oracle driver that vcan run with JDK 1.2.x is in the
OTN
: download area and is named "816SDK for JDK 1.2"
: it will work with the JDK 1.2.X using the JDBC 1.22 spec from
JDK
: 1.1.X.
: IT DOES NOT PROVIDE THE FULL JDBC 2.0 FEATURES/ FUNCTIONALITY
: THAT ARE INCLUDED IN THE JDK 1.2.X CLASSES.
Does anyone know which versions of Oracle this driver will work
with? I'm trying to use JDK 1.2 and Oracle 8.04 with the above
mentioned driver, but it's misbehaving on prepared statements:
I'm getting a 'ORA-8001 not all variables bound' error even
though I'm correctly specifying binary data (using
PreparedStatement.setBytes(..)) for a LONG RAW column...
Please don't tell me I have to upgrade my Oracle installation in
order to use JDBC with JDK 1.2.x
Feedback is greatly appreciated!
thanks!
// Tor Kleiberg
null -
Choosing oracle for linux ! what are merits and demerits
we are going to choose oracle for linux for our e-commerce site which will serve as search engin and shopping mall.
Thanks cgawoods for the advice...
I followed all the steps that you mentioned... Installing the Oracle client proved to be easy as pie on the Linux server, and connecting to the Oracle instance on the NT server was instantaneous with sqlplus... tnsping also finds the Oracle server without a hitch.
I also made the modifications to the coldfusion start script you mentioned, i.e. setting ORACLE_HOME, etc (which is also mentioned in Allaire's docs).
However.... (yes, here it comes) The DSN still comes up as 'failed' when I try to add a new one using the native drivers in the Coldfusion Administrator.
Do I need to do anything on the Oracle server side (NT) first in order to get things working?
I'm pretty stumped at this point as to why this won't work.
Thanks
DH
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by cgawoods ():
I've done Cold Fusion installs on Solaris 2.6, and am an OCP DBA. If you download the Oracle 8.0.5 EE (RedHat 5.2) or Oracle8i EE(Redhat 6.0-6.2) Server programs, you may use the "Server" installation as an Oracle Client. Once you get Oracle installed, you will need to configure the tnsnames.ora file to point to your remote database. Then, you will need to point Cold Fusion to the $ORACLE_HOME where you installed the Oracle Server software. You will want (and probably need) to use the "native" oracle driver for Cold Fusion instead of the ODBC driver. Once the Oracle installation is complete, and you can "tnsping" the Oracle instance on NT, you should be able to configure Cold Fusion to talk to your Oracle database. It's just a matter of reading Allaire's documentation on configuring Cold Fusion for use with Oracle at that point.<HR></BLOCKQUOTE>
null -
Downloading Linux Grid Control Agent and jdk
Hi,
Please let me know where can I download the following software.
Linux Grid Control agent doanload 10_2_0_2_0
jdk-6u21-linux-1586-rpm.bin
oracleasmlib-2.0.2-1.i386.rpm
Regards,
VNThis might help you.
GC Agent: http://www.oracle.com/technetwork/oem/grid-control/downloads/agentsoft-090381.html
Java: http://en.sourceforge.jp/projects/sfnet_crawlzilla/downloads/other/jdk-6u21-linux-i586-rpm.bin/
ASMlib: http://www.oracle.com/technetwork/server-storage/linux/downloads/rhel5-084877.html this is 2.0.4.X, i don't think you 2.0.2.X is available now...
btw, Please mark the thread as 'answered', if you feel you got your question answered. This will save the time of others who search for open questions to answer.
Regards,
CSM -
SOLUTION MANAGER 7.1 install on linux/oracle java error on ABAP IMPORT
Hello sdn experts, Im trying to install the Solution Manager 7.1 on linux/oracle, but It always stops at the abap import,
The error is in the Program "Migration Monitor", that exit with error.
Reviewing the logs, it seems that is trying to execute a java command line with a unrecognized option:
"Execution of the command "/opt/IBMJava2-amd64-142/bin/java -classpath migmon.jar -showversion -Xmx1024m com.sap.inst.migmon.imp.ImportMonitor -sapinst" finished with return code 1. Output:
JVMJ9VM007E Command-line option unrecognized : -Xjvm:j9vm23"
Usage : java [-options] class...
As you can see, the sdk used is from IBM, and it works for all other saps we have here.
Is the wrong jdk? Which I should use if its wrong?
If is the right jdk, how could I get rid of this option and change it?
Any idea would be appreciated.
Thank youHi Maurici,
have you checked this note already?
[https://service.sap.com/sap/support/notes/1159935|https://service.sap.com/sap/support/notes/1159935]
It is about your error message. ...
Best, Hannes -
Hello,
I am upgrading EBS 11i to 12i, Discoverer 4 to 11. After completing ebs installation and upgrade successfully, I am now working on the Oracle Fusion piece of the upgrade.
I have installed
1. JDK
2. Repository Creation Utility - RCU (schema)
3. Weblogic - WLS 10.3.6
4. Oracle Fusion - Discoverer 11g Release 1 Patchset 1 11.1.1.2.0 PFRD
5. Oracle Portal, Forms, Reports and Discoverer 11g Patchset 11.1.1.6.0 - Patchset 13517084
6. Executed config.sh and it failed with but continued.
During the Configuration of Oracle Fusion with config.sh there was failure at with "fails at creating data sources" and accidentally proceeded and all seem to go well until after shutting down the servers when Weblogic Managed Server is unable to start.
The start log indicated: "weblogic.store.PersistentStoreFatalException: [Store:280105]The persistent file store "_WLS_WLS_DISCO" cannot open file _WLS_WLS_DISCO000000.DAT." and I have been unable to find a solution for this error?
See log file error at https://dl.dropboxusercontent.com/u/15497130/oracle/ebs11/startManagedWebLogic.sh_nohup.out
If re-installation is my only option, then what are the steps to uninstall, and which components do I have to uninstall given that I had upgraded all the schemas involved?
MathiasHey,
You can always change the JDBC datasources in the Weblogic admin console . but have you recorded what is the specific error you got during the datasources creation .
I prefer...create a new user , give him sysdba privillages . Start RCU and create the DEV_DISCOVERER , DEV_DISCOVERER_PS schemas (prefix is your choice)
The Admin server will start . so go to admin console .
click services -> Data Sources
Check the data sources you have . edit each datasource and update the connection pool information .
after this you can start the Managed server WLS_DISCO
i believe this will solve this .........
if you still get issue again . you can try the link Using the WebLogic Persistent Store
Thanks
Naga -
Install and config issues with Oracle Portal, Forms, Reports and Discoverer
For a while now I've been struggling with migrating a testing database to a newer version.
And right now I'm pretty much stuck at trying to configure Oracle Portal, Forms Reports and Discoverer
What I've got:
Windows server 2008 R2 64bit
Oracle 11g database
Java 6u27 64bit
JDK 1.6 64bit (using this after 1.7 ended up throwing out bugs while trying to start a weblogic server)
JDK 1.7 64bit
Weblogic 10.3.5 (or so i think - I've installed from the wls1035_generic.jar from the oracle website)
PFRD 11.1.1.2 with 11.1.1.3 installed over it, installed without config
and a hanging up configuration
Basically I've been trying to install PFRD (only forms, reports and enterprise manager from it actually) but it kept failing once it got to the configuration stage, so I installed without config, applied 11.1.1.3 and now trying to run the config manually with the good old \bin\config.bat
Result - the config froze for approx.18 hours then failed
There isn't much useful info I could deduct from the logs, mostly just says one or more configuration parts failed. At one place it mentions trying to set up a domain and starting up an adminserver for it - and apparently that's where it hangs up and finally times out and fails.
I'm a little clueless what to do about it as the logs don't say anything else of use I could understand. Any ideas there?Trying the step by step, the only difference between that and what i do seems to be the file copying (which I can't do - there is no windows\extra\ directory anywhere, the files mentionned seem to already be on their places and either only there, or exactly the same) and clistering
So far the news ain't good - the config process hangs on creating domain ->Step Creating Domain started
It isn't frozen per se - the process doesn't use up any processor time, memory consumption within bounds, it reacts to button clicks and all..it just doesn't do anything concerning the said domain
the last thing the .out file shows:
Creating a new AdminServer Object ...
AdminServer port is 7002
Starting the domain ...
LOADING DLL : E:\OracleDb\Middleware\develtools\install\config\\StartUtil64.dlland in the log:
[2011-09-08T11:57:03.456+02:00] [as] [NOTIFICATION] [] [oracle.as.install.engine] [tid: 14] [ecid: 0000J98U0KsFS8XLxuDCiW1EQ92r000005,0] Setting >valueOf(DOMAIN_PORT) to:7002. Value obtained from:USERit's the same it did last time, when after 18hours it woke up with .out saying:
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3173)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3033)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1644)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:634)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3143)
... 18 more
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 13 more
progress in calculate progress4
progress in calculate progress4
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.classic.ca.standard.StandardWorkFlowExecutor.execute(StandardWorkFlowExecutor.java:65)
at oracle.as.install.classic.ca.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:26)
at oracle.as.install.classic.ca.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:124)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:685)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:390)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 13 more
Going to execute executeAfterConfig
java.lang.IllegalStateException: Action:Application Configuration failed with error:Configure Classic Failed.
at oracle.as.install.engine.modules.configuration.client.ConfigAction.fail(ConfigAction.java:227)
at oracle.as.install.classic.ca.ClassicConfigMain.doExecute(ClassicConfigMain.java:129)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
In Config Module Finish Event...and the log continuing with some variable setting notifications and this:
[2011-09-08T08:27:45.272+02:00] [as] [ERROR] [] [oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager] [tid: 14] [ecid: >0000J93lRQOFS8XLxuDCiW1EPpn_000005,0] One or More configurations failed. Exitingthen again more traces and notifications until the end marking config as failed
I'm kinda paranoid about the double backslash in the dll path, but other than that no clue as to why the domain doesn't set up
the other link you mentionned seems to have no relevance yet
does that clear up anything for you though?
..can the lack of SOA suite have anything to do with the problem? -
Error configuration tools EPM 11.1.2.0.0 on Linux Oracle Enterprise 64bit
Dear all,
I have my Hyperion EPM 11.1.2.0.0 installed on server Linux Oracle Enterprise 64bit
the installation succeeded, until i try to run configuration, it wont show up. I already tried to run confgtool.sh, then it shows error message like below
============================================================================================
Launching the Hyperion Configuration Utility, please wait...
Running preconfig checks...
Running EPM_ORACLE_HOME check...
EPM_ORACLE_HOME environment variable value:
/home/hyperion/Oracle/Middleware/EPMSystem11R1
JAVA_HOME environment variable value:
/home/hyperion/Oracle/Middleware/EPMSystem11R1/../jdk160_11
EPM_ORACLE_HOME check succeeded
Running .oracle.products check... .oracle.products check succeeded Running Jars manifest check...
Time spent for manifests parsing: 342 ms
Maximum jars depth achieved: 9, while restriction was: unrestricted
Parsed 417 manifests
Total jars and classpath entries encountered: 417
Total not-existing referenced classpath entries count: 56
Total classpath elements to check: 67
ERROR:
/home/hyperion/Oracle/Middleware/oracle_common/modules/oracle.dms_11.1.1/dms.jar
not exists; file depth: 2; referenced from /home/hyperion/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar
referenced from
/home/hyperion/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
ERROR:
/home/hyperion/Oracle/Middleware/oracle_common/modules/oracle.odl_11.1.1/ojdl.jar
not exists; file depth: 2; referenced from /home/hyperion/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_j2se.jar
referenced from
/home/hyperion/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
ERROR:
/home/hyperion/Oracle/Middleware/oracle_common/modules/org.apache.commons.beanutils_1.6.jar
not exists; file depth: 1; referenced from /home/hyperion/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
ERROR:
/home/hyperion/Oracle/Middleware/oracle_common/modules/oracle.http_client_11.1.1.jar
not exists; file depth: 2; referenced from /home/hyperion/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_soa.jar
referenced from
/home/hyperion/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
ERROR:
/home/hyperion/Oracle/Middleware/oracle_common/modules/oracle.jmx_11.1.1/jmxframework.jar
not exists; file depth: 2; referenced from /home/hyperion/Oracle/Middleware/EPMSystem11R1/common/jlib/11.1.2.0/epm_soa.jar
referenced from
/home/hyperion/Oracle/Middleware/EPMSystem11R1/common/config/11.1.2.0/configtool.jar
FATAL ERROR: Jars manifest check failed with message "Some referenced jars do not exist"
Exiting in 30 seconds
============================================================================================
i already create new user that have access to oracle middleware home (not ROOT user)
Any idea on this problem?
Thanks a lotDear John,
Thanks for replying
i've downloaded and extracted all files on edelivery.oracle.com sections Oracle EPM (11.1.2.0.0) Media Pack for Linux x86-64.
1st symptoms : i've installed it all, at the first attempt, Oracle HTTP Server always failed to install. But on the 2nd try it succeeded (install only oracle http server), so i assumed all part already installed well.
2nd symptoms : after installation, there is config button on the GUI, but after i click it, it only closed the GUI, and nothing happen. So i running configtool.sh from config directories. and it show the error.
For user account, already have full access to relevant directories.
I checked on every logs folder on hyperion home, there is no related logs for this installation. any idea where the install log is?
I can't find "oracle_common" folder, i think this is the root cause, because the error logs referring to jar files from this folder
Thanks
Edited by: nerv18 on Sep 17, 2010 10:24 AM -
WHERE ARE Linux Oracle Services (as in NT) ?
WHERE ARE the Linux Oracle Services created by the OUI (such as listener, db, apache, etc) and how cn i start / stop them automatically ?
Also, is there in any place "the oracle program group menus" like in WINDOWS START MENU, so we can see all programs installed ?
I Installed 9iAS release 2 in RedHat
ThanksI use 8.1.7 on LInux. There are dbshut and dbstart scripts in $ORACLE_HOME/bin and there is example of "service-script" in Installation Guiede. So you can create "service-scripts", put in in /etc/rc.d/init.d and usecommends like /etc/rc.d/init/oradb start/stop, besides it you can make links for this script in rc.0, rc.6, rc.3 etc.. (like other services). You may write me a letter ([email protected]) and I'll send you service-scripts, if you will have troubles.
-
Errors:Installing Oracle Portal, Forms, Reports and Discoverer on Win7
Someone can help me?
I installed Oracle Portal, Forms, Reports and Discoverer on Win7.
I have install:
jdk 64bit
Oracle db 11g (64bit)
Oracle Weblogic 1033 (wls1033_generic.jar)
Oracle Portal, Forms, Reports and Discoverer (ofm_pfrd_win_11.1.1.2.0_64/ofm_pfrd_win_11.1.1.3.0_64)
Configure Components Screen:I just choose the Oracle Forms/reports Oracle Forms/reports builder Enterprise Manager Oracle Web Cache .
Configure Ports Screen:Auto Port Configuration.
Specify Proxy Details Screen:No
Specify Application OID Screen:NO
But when I configure the "Configuring the Classic Instance" under the "Oracle Classic 11g-Home1". It's always pending in "Creating the domain". No any Error information.
the related log information:
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
LOADING DLL : C:\Oracle\Middleware\as_2\install\config\\StartUtil64.dllSince your weblogic is on version 10.3.3, you can only succesfully configure your fusion middleware when you are on version 11.1.1.3.
So (1) restart the install of fusion middleware 11.1.1.2, (2) choose install type INSTALL ONLY, (3) start installation of fusion middleware 11.1.1.3 and finally (4) configure fusion middleware using AS_ORACLE_HOME\bin\config.bat -
Help in Installing Oracle Portal,Forms,Reports and Discoverer(11.1.1.2.0)
Hi,
I am trying to install Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Linux x86-64.
I have installed weblogic 10.3.5 generic jar file.
When i try to install forms and reports server the configuration step fails while creating weblogic domain.
Please help me installing portal and reports.
Is there any patch i am missing or the weblogic version is incorrect?
Thanks.You cannot configure Fmw 11.1.1.2 against WLS 10.3.5. They are not supported nor compatible.
If you want to use WLS 10.3.5, you need to "install" 11.1.1.2, but do not configure. That is an installation option. After you have successfully installed 11.1.1.2 you will need to patch it to 11.1.1.6. After patching, you then can run the configuration (config.bat).
http://docs.oracle.com/cd/E23943_01/install.1111/e10421/install.htm#CLINS256
Version 11 is far more complex than previous versions. I strongly encourage everyone to review the product documentation before trying to install. You can also refer to the following MyOracleSupport note:
Steps to Maintain Oracle Fusion Middleware 11g Release 1 (11.1.1) (Doc ID 1073776.1) -
Linux+Oracle:Unable to start the DSCManager
Hello
I installed LCES on Linux+Oracle.When start Jboss,some errors like this:
2007-08-02 11:51:01,493 ERROR [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public abstract java.lang.Object com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionCMTAdapterLocal.doRequiresNe w(com.adobe.idp.dsc.transaction.TransactionDefinition,com.adobe.idp.dsc.transaction.Transa ctionCallback) throws com.adobe.idp.dsc.DSCException:
com.adobe.idp.DocumentError: The document pointing to the file "/opt/jboss_adobe_new/server/all/svcnative/DocumentStorage/docm1185965642591/0538f4740b03 e39d8e86e521ff9aa9cc" has expired. Consider increasing the document disposal timeout.
at com.adobe.idp.DocumentFileBackend.checkFileExistance(DocumentFileBackend.java:256)
at com.adobe.idp.DocumentFileBackend.copy(DocumentFileBackend.java:263)
at com.adobe.idp.Document.passivate(Document.java:744)
at com.adobe.idp.Document.passivate(Document.java:691)
^^^^^^^
and
2007-08-02 11:51:01,572 ERROR [org.jboss.ejb.plugins.LogInterceptor] RuntimeException in method: public abstract java.lang.Object com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterLocal.doRequiresNe w(com.adobe.idp.dsc.transaction.TransactionDefinition,com.adobe.idp.dsc.transaction.Transa ctionCallback) throws com.adobe.idp.dsc.DSCException:
ALC-DSC-000-000: com.adobe.idp.dsc.DSCRuntimeException: Internal error.
at com.adobe.idp.dsc.registry.component.impl.ComponentRegistryImpl$11.doInTransaction(Compon entRegistryImpl.java:665)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doRequiresNew (EjbTransactionBMTAdapterBean.java:218)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Caused by: java.lang.ClassNotFoundException: com.adobe.idp.scheduler.SchedulerServiceImpl
at com.adobe.idp.dsc.DSContainerSearchPolicy.searchClassUsingImportExport(DSContainerSearchP olicy.java:446)
at com.adobe.idp.dsc.DSContainerSearchPolicy.searchClassUsingParentLast(DSContainerSearchPol icy.java:300)
^^^^^^^^^^^^^^
and
2007-08-02 11:51:01,633 ERROR [com.adobe.idp.dsc.startup.DSCStartupServlet] DSC Startup failed. Reason: Internal error.
2007-08-02 11:51:01,643 WARN [com.adobe.idp.dsc.startup.DSCStartupServlet] Unable to start the DSCManager
Can somebody help me?
Thanks.One suggestion I can make is to re-deploy the solution components (DSCs).
- Jayan -
JDeveloper 11g and JDK 1.4.2_16
Hi! I just created a new simple app in JDev 11g and selected the JDK 1.4.2_16 for the model project. I created a set of business components from tables, built the project and them attempted to run the AppModule tester.
I got the following error:
/usr/java/j2sdk1.4.2_16/bin/java -server -classpath /opt/app/oracle/product/jdevstudio1111/BC4J/jlib/bc4jtester.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/bc4jsyscat.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/db-ca.jar:/opt/app/oracle/product/jdevstudio1111/jlib/jdev-cm.jar:/opt/app/oracle/product/jdevstudio1111/lib/xmlparserv2.jar:/opt/app/oracle/product/jdevstudio1111/jlib/ohj.jar:/opt/app/oracle/product/jdevstudio1111/jlib/help-share.jar:/opt/app/oracle/product/jdevstudio1111/jlib/share.jar:/opt/app/oracle/product/jdevstudio1111/jlib/jewt4.jar:/opt/app/oracle/product/jdevstudio1111/jlib/oracle_ice.jar:/opt/app/oracle/product/jdevstudio1111/jlib/ojmisc.jar:/opt/app/oracle/product/jdevstudio1111/ide/lib/idert.jar:/opt/app/oracle/product/jdevstudio1111/ide/lib/javatools.jar:/usr/java/j2sdk1.4.2_16/jre/lib/rt.jar:/usr/java/j2sdk1.4.2_16/jre/lib/i18n.jar:/usr/java/j2sdk1.4.2_16/jre/lib/sunrsasign.jar:/usr/java/j2sdk1.4.2_16/jre/lib/jsse.jar:/usr/java/j2sdk1.4.2_16/jre/lib/jce.jar:/usr/java/j2sdk1.4.2_16/jre/lib/charsets.jar:/usr/java/j2sdk1.4.2_16/jre/classes:/home/mcruz/development/11g/SessionTest11g/.adf:/home/mcruz/development/11g/SessionTest11g/Model/classes:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/adf-share-support.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/adf-share-ca.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/adf-share-base.jar:/opt/app/oracle/product/jdevstudio1111/jlib/identitystore.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/bc4jmt.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/bc4jwizard.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/groovy-all-1.0.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/bc4jct.jar:/opt/app/oracle/product/jdevstudio1111/jlib/commons-el.jar:/opt/app/oracle/product/jdevstudio1111/jlib/jsp-el-api.jar:/opt/app/oracle/product/jdevstudio1111/jlib/oracle-el.jar:/opt/app/oracle/product/jdevstudio1111/jlib/resourcebundle.jar:/opt/app/oracle/product/jdevstudio1111/lib/java/api/jaxb-api.jar:/opt/app/oracle/product/jdevstudio1111/lib/java/api/jsr173_api.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/lib/activation.jar:/opt/app/oracle/product/jdevstudio1111/lib/java/shared/sun.jaxb/2.0/jaxb-xjc.jar:/opt/app/oracle/product/jdevstudio1111/lib/java/shared/sun.jaxb/2.0/jaxb-impl.jar:/opt/app/oracle/product/jdevstudio1111/lib/java/shared/sun.jaxb/2.0/jaxb1-impl.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/adfshare.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/adfm.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/jlib/adfui.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/adfbinding.jar:/opt/app/oracle/product/jdevstudio1111/adfdt/lib/adfdtatrt.jar:/opt/app/oracle/product/jdevstudio1111/adfdt/lib/adftransactionsdt.jar:/opt/app/oracle/product/jdevstudio1111/adfdt/lib/adfdt_common.jar:/opt/app/oracle/product/jdevstudio1111/mds/lib/mdsrt.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/jazn.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/jazncore.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/jps-api.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/jps-common.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/jps-internal.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/jps-fmw.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/jps-unsupported-api.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/lib/jacc-api.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/lib/oc4j-unsupported-api.jar:/opt/app/oracle/product/jdevstudio1111/jdbc/lib/ojdbc5dms.jar:/opt/app/oracle/product/jdevstudio1111/jlib/orai18n.jar:/opt/app/oracle/product/jdevstudio1111/jlib/ojdl.jar:/opt/app/oracle/product/jdevstudio1111/jlib/dms.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/lib/bc4jdomorcl.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/jlib/bc4jdatum.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/lib/servlet.jar:/opt/app/oracle/product/jdevstudio1111/jlib/commons-cli-1.0.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/lib/commons-collections.jar:/opt/app/oracle/product/jdevstudio1111/jlib/xmlef.jar:/opt/app/oracle/product/jdevstudio1111/lib/xml.jar:/opt/app/oracle/product/jdevstudio1111/rdbms/jlib/xdb.jar:/opt/app/oracle/product/jdevstudio1111/javacache/lib/cache.jar:/opt/app/oracle/product/jdevstudio1111/diagnostics/lib/ojdl.jar:/opt/app/oracle/product/jdevstudio1111/j2ee/home/lib/pcl.jar:/opt/app/oracle/product/jdevstudio1111/ucp/lib/ucp.jar:/opt/app/oracle/product/jdevstudio1111/lib/java/shared/oracle.javatools/11.1.1.0.0/dafrt.jar:/opt/app/oracle/product/jdevstudio1111/lib/java/shared/oracle.javatools/11.1.1.0.0/javatools-nodeps.jar:/opt/app/oracle/product/jdevstudio1111/BC4J/jlib/bc4jui.jar:/opt/app/oracle/product/jdevstudio1111/dvt/lib/dvt-client.jar:/opt/app/oracle/product/jdevstudio1111/dvt/lib/dvt-utils.jar:/opt/app/oracle/product/jdevstudio1111/jlib/LW_PfjBean.jar: oracle.jbo.jbotester.MainFrame -X 116D6D52C8E -H jar:file:/opt/app/oracle/product/jdevstudio1111/jdev/doc/studio_doc/ohj/bc4j_f1.jar!/bc4j_f1.hs
Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/jbo/jbotester/MainFrame (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Process exited with exit code 1.
Am I to assume that jdk1.4.x is no longer supported in JDeveloper and that I should start using JDK1.5.x? But apps built with JDK1.5.x are not supported in AppServer 10.1.2.0.2, which is J2EE 1.3 compliant... Does that mean that JDeveloper 11g is suitable only for apps deployed on OAS 10.1.3.x and above? (OAS 10.1.3.x is J2EE 1.4 compliant, and OAS 11g will be J2EE 5.x compliant).
Comments please.
Thx!be on OracleAs 10.1.3 at a minimum<<The problem (for us) with Oracle AS 10.1.3 is that Portal 10.1.4 will not run on it (not certified). We want to take advantage of ADF RC and we hope to be able to produce JSF portlets or "portletized" apps. But at the moment we are "stuck" with 10.1.2.0.2 and JDK 1.4.x/J2EE1.3...
While you can have a 10.1.2 farm and add a 10.1.3 separate instance it is not a clean/complete integration (you can't manage all services from the 10.1.2 farm EM and others; this is what I've seen so far, IMO).
We can't wait for OAS 11g to come out and take a look at that. And I certainly hope that Portal will be certifed on 11g so that we can just jump there.
Another wish: WebCenter functionality in Portal, or Portal/WebCenter rolled out into one.
Maybe you are looking for
-
Hi , I am trying to create a new web app using Central Administration in Sharepoint 2010 and getting an error "The password supplied with the username was not correct. Verify that it was entered correctly and try again". I tried running this command
-
2.0 & iTunes 7.1 Screwed Original iPhone Big Time!
It seems a lot of people are having issues with 2.0 and 7.1 iTunes but wondering if anyone is seeing these issues. I've add my original iPhone since Day 1 release (yes, 4 hours in line) and have been preaching the praises of Apple and this phone for
-
Flash player for 64 bit Windows 7
I have Windows 7 with the 64 bit that also lets you use the 32 bit. It automatically updated to the latest version of flash player but now my settings manager won't work. I have to clear it before I can get on Facebook. Even if it has nothing in the
-
How to use relative pathnames in a webb application?
We have made a webb application with Netbeans. It was developed on Windows, but will be deployed on Linux. In the application, a file is created from the pathname C:/Documents and Settings/xeyvalm/CRMtester/res/parameters.txt. I want to avoid the har
-
My file is read only how do i turn it off?
the only page that appears under www.simon-gideons.com is read only how do i turn that off so i can edit that page?