Linux Oracle RAC Issues with CRS
Using the Linux Oracle RAC install guide - I've finally installed my install on Linux for the Oracle RAC. Just one problem - now after 10 mins or so - one of my nodes loses communication which barks out a PRKH-1010 error after trying to run a status check on my nodes using the srvctl status nodeapps -n <servername> command.
any clues or ways to diagnose?
Hi!
The gsd relies on some files residing in /tmp/.oracle
Are they still there?
GSD is known to stop if they are absent.
cu
Andreas
Similar Messages
-
Oracle OEM issue with RAC Database
We're have Grid Control 11g on Linux. The issue that I've is when trying to access the "Top Activity" screen for node 1 of a 2-node RAC cluster. The general "Performance" tab displays, but the graphs will not get past "Loading". Furthermore, when you click "Top Activity", the page displays but with no graph and the following error:
ORA-12504-TNS:listener was not given the SID in CONNECT_DATA
Access to the screens which aggregate all instances or to node 2 specifically seems to work properly. This is case whether the SCAN listener is running on either node.
We have a 2-node RAC 11gR2 cluster w/ ASM and 3 SCAN listener. This is HP-UX
Enterprise Manager 11g is being run from another host, this is RHEL5bcm@bcm-laptop:~$ oerr ora 12504
12504, 00000, "TNS:listener was not given the SERVICE_NAME in CONNECT_DATA"
// *Cause: The listener was not configured with a default service and
// SERVICE_NAME was missing from the CONNECT_DATA received by the listener.
// *Action: Possible solutions are:
// - Configure DEFAULT_SERVICE parameter in LISTENER.ORA with a valid service
// name. Reload the listener parameter file using reload [<listener_name>].
// This should be done by the LISTENER administrator.
// - If using a service name, Check that the connect descriptor corresponding
// to the service name in TNSNAMES.ORA has a SERVICE_NAME or SID component
// in the CONNECT_DATA. -
I have installed Oracle RAC on VM Ware . I am facing problem during database connection after shutting down any node . It takes 7-8 minutes for making new connection after any node down.
Please find below crs_stat -t output
Name Type Target State Host
ora.DATA.dg ora....up.type ONLINE ONLINE rac1
ora....ER.lsnr ora....er.type ONLINE ONLINE rac1
ora....N1.lsnr ora....er.type ONLINE ONLINE rac1
ora.asm ora.asm.type ONLINE ONLINE rac1
ora....acdb.db ora....se.type ONLINE ONLINE rac1
ora.eons ora.eons.type ONLINE ONLINE rac1
ora.formtl.db ora....se.type ONLINE ONLINE rac1
ora.gsd ora.gsd.type ONLINE ONLINE rac1
ora....network ora....rk.type ONLINE ONLINE rac1
ora.oc4j ora.oc4j.type OFFLINE OFFLINE
ora.ons ora.ons.type ONLINE ONLINE rac1
ora.orcl.db ora....se.type ONLINE ONLINE rac1
ora....SM1.asm application ONLINE ONLINE rac1
ora....C1.lsnr application ONLINE ONLINE rac1
ora.rac1.gsd application ONLINE ONLINE rac1
ora.rac1.ons application ONLINE ONLINE rac1
ora.rac1.vip ora....t1.type ONLINE ONLINE rac1
ora....SM2.asm application ONLINE ONLINE rac2
ora....C2.lsnr application ONLINE ONLINE rac2
ora.rac2.gsd application ONLINE ONLINE rac2
ora.rac2.ons application ONLINE ONLINE rac2
ora.rac2.vip ora....t1.type ONLINE ONLINE rac2
ora....ry.acfs ora....fs.type ONLINE ONLINE rac1
ora.scan1.vip ora....ip.type ONLINE ONLINE rac1
One thing i noted that instance service is not running in crs_stat -t output .
After shutting down any node it give the error TNS-12514: TNS:listener does not currently know of service requested in connect descriptor . and it takes 7-8 for making any new connection.
Kindly suggest how i can resolve this issue.
Edited by: user10505923 on Aug 17, 2011 5:18 AMDepending on how your service was created you may need to register it with CRS:
srvctl add service -d db_name -s service_nameCan you post your listener info? output from issuing lsnrctl status and also your tnsnames or connect string you are using to connect?
(be sure to change any sensitive data to something generic but make sure you change it in all places to keep it consistent)
Also if you use the direct IP address or hostname in your connect string instead of the SCAN does the slowness go away? -
We have two node rac setup. We are facing issues with the second node. if both node are up then application is not able to connect with the database. if the second node is down then application is able to connect.
What is the reason of this abnormal behaviour ?
any suggestion ?
We have oracle 10g RAC ( Database version 10.2.0.4), CRS version 10.2.0.3
Please helporacle@ora1-oam # crsstat
HA Resource Target State
ora.cms.cms1.inst ONLINE ONLINE on ora1-oam
ora.cms.cms2.inst ONLINE ONLINE on ora2-oam
ora.cms.db ONLINE ONLINE on ora1-oam
ora.cms.db.cms.com.cms1.srv ONLINE ONLINE on ora1-oam
ora.cms.db.cms.com.cms2.srv ONLINE ONLINE on ora2-oam
ora.cms.db.cms.com.cs ONLINE ONLINE on ora1-oam
ora.myrio.db ONLINE ONLINE on ora1-oam
ora.myrio.db.myrio.com.cs ONLINE ONLINE on ora1-oam
ora.myrio.db.myrio.com.myrio1.srv ONLINE ONLINE on ora1-oam
ora.myrio.db.myrio.com.myrio2.srv ONLINE ONLINE on ora2-oam
ora.myrio.myrio1.inst ONLINE ONLINE on ora1-oam
ora.myrio.myrio2.inst ONLINE ONLINE on ora2-oam
ora.ora1-oam.ASM1.asm ONLINE ONLINE on ora1-oam
ora.ora1-oam.LISTENER_ORA1-OAM.lsnr ONLINE ONLINE on ora1-oam
ora.ora1-oam.gsd ONLINE ONLINE on ora1-oam
ora.ora1-oam.ons ONLINE ONLINE on ora1-oam
ora.ora1-oam.vip ONLINE ONLINE on ora1-oam
ora.ora2-oam.ASM2.asm ONLINE ONLINE on ora2-oam
ora.ora2-oam.LISTENER_ORA2-OAM.lsnr ONLINE ONLINE on ora2-oam
ora.ora2-oam.gsd ONLINE ONLINE on ora2-oam
ora.ora2-oam.ons ONLINE ONLINE on ora2-oam
ora.ora2-oam.vip ONLINE ONLINE on ora2-oam
ora.rms.db ONLINE ONLINE on ora1-oam
ora.rms.db.rms.com.cs ONLINE ONLINE on ora1-oam
ora.rms.db.rms.com.rms1.srv ONLINE ONLINE on ora1-oam
ora.rms.db.rms.com.rms2.srv ONLINE ONLINE on ora2-oam
ora.rms.rms1.inst ONLINE ONLINE on ora1-oam
ora.rms.rms2.inst ONLINE ONLINE on ora2-oam
ora.tmpl.db ONLINE ONLINE on ora1-oam
ora.tmpl.tmpl1.inst ONLINE ONLINE on ora1-oam
ora.tmpl.tmpl2.inst ONLINE ONLINE on ora2-oam
ora.vcas.db ONLINE ONLINE on ora1-oam
ora.vcas.db.vcas.com.cs ONLINE ONLINE on ora1-oam
ora.vcas.db.vcas.com.vcas1.srv ONLINE ONLINE on ora1-oam
ora.vcas.db.vcas.com.vcas2.srv ONLINE ONLINE on ora2-oam
ora.vcas.vcas1.inst ONLINE ONLINE on ora1-oam
ora.vcas.vcas2.inst ONLINE ONLINE on ora2-oam
ora.vmxcsmdb.db ONLINE ONLINE on ora1-oam
ora.vmxcsmdb.vmxcsmdb1.inst ONLINE ONLINE on ora1-oam
ora.vmxcsmdb.vmxcsmdb2.inst ONLINE ONLINE on ora2-oam
this is the status when both nodes were up..... -
ORACLE RAC FAILED WITH PRVF-4007- 11.1.0.7
Hi ,
We are in middle installing Oracle RAC on AIX 6.1 when run RAC verification utility .
cluvfy stage -post hwos -n node1,node2 -verbose
it generate error from user
Result: PRVF-4007 : User equivalence check failed for user "oracle"
Post-check for hardware and operating system setup was unsuccessful.
Checks did not pass for the following node(s):
Node1
I did ssh,rsh from both nodes then I face issue . I modified hosts.equiv
Now I can do rsh from both nodes and with node itself .
But for ssh I cannot
Example from node1
ssh node1 date ( not work)
ssh node2 date ( work)
rsh node1 date ( work)
rsh node2 date ( work)
where do you think problem?
Edited by: user12010537 on 21/03/2011 12:30 ص
Edited by: user12010537 on 21/03/2011 12:31 صHi;
For your issue i suggest close your thread here as changing thread status to answere and move it to Forum Home » Grid Computing » RAC, ASM & Clusterware Installation which you can get more quick response
Regard
Helios -
RAC Issue with high Transaction OLTP + GC's
In the Lab i am testing in-house application with Oracle 10g.
Setup
- 2 Database servers (RHEL OS 3, IBM H/W, 4GB RAM)
- 2 in house Application servers (RHEL OS 3, IBM H/W, 4GB RAM)
- IBM Disk Array with 2Gbps fiber Cable Speed
- Cisco LAN Switch with 100mbps/sec Port
Application Detail-
-- Its a OLTP application.
-- Doing lots of insertion,update,delete,commit for each transaction.
-- With high application load,its doing 5000 DB tranactions/sec with database.
The following test scenario need to test
1. Start one application server and conenct with DB instance1 and push high load..
2. Start both application server and connect with DB Instance1b and push high load from both applications.
3. Start Both application server and connect with both DB servers ( For Ex.
(A1-DB1 & A2-DB2) and check the application compatibility with RAC environment ( Note- Here need to push very less db transaction data to DB servers).
4. Similar like 3 but with very high db transaction rate
Now these are the results
1. Full Success
2. Full Success
3. Full Success
4. Fail
Detail description of Case4 Failure.
When ever i am starting applications with high load, within few minutes application quesues are getting full and db instances are not able to handle load.
When i checked the Oracle ASH Report and then found following major events
1. gc buffer busy
2. gc current block busy
3. gc current multi block request
4. gc cr block 2-way
i checked the oracle documents and found three are major root cause for this issue.
-- Interconnect
-- Load issues
-- SQL Execution against a Large shared working set
But i am not sure, how i can come out from this issue.
If any one faced this issue with Oracle RAC. Please share your experience or give some suggestion to come out from this issue.
Rgds
Sumit
Bangalore,IndiaHi,
you can use fiber for interconnect, Once i have looked for this option but haven't implemented.......
in this case your global cache requests are too much. one thing more if is it possible then divide the load according to domains. like same queries on on node and other domain queries on second nodes...... e.g. reporting on node2 and oltp transations on node1.
and kindly look into it...
http://www.ardentperf.com/2007/09/12/gc-buffer-busy-waits-in-rac-finding-hot-blocks/ -
Issue with CRS Historical report scheduler
Hello guys,
I have a customer with ipccx 5.02 .
THe customer could execute manual reports but the scheduler reports doesnt work.
I follow the IPCCX troubleshooting guide :
1.Stop and start scheduler service.
2. Connectivity is fine.
I dont receivce any error from CRS client , i need little help im new in IPCC world?
Any suggestions please?
Thanks,
CarlosHi Anubhati,
PC is logged during the time that scheduled is programming and also is not in sleep mode.
I have download the CiscoSch log from CRS Historical report and i found i issue with license :
INFORMATIONAL Jan 19 2011|17:00:45 Authenticate [email protected]@default user on Application Server 10.181.55.247
104 ERROR Jan 19 2011|17:00:45 Getting of total available license info failed
105 ERROR Jan 19 2011|17:00:45 Historical Reporting Licenses Available(=0); Report cannot be generated.
I have the following license :
UCCX enhanced
IVR ports 150
Enhanced seat 22
CCX Maximum agents 300.
I generated a report for see how many agents is logged in = 15 .
Regards,
Carlos -
Hello, everyone.
I am having issues with running a DELETE statement on an Oracle 10g database.
DELETE
FROM tableA
WHERE ID in (1,2,3)
If there is only one ID for the IN clause, it works. But if more than one ID is supplied, I get an "SQL command not properly ended" error message. Here is the query as CF:
DELETE
FROM TRAINING
WHERE userID = <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#trim(form.userID)#">
AND TRAINING_ID in <cfqueryparam value="#form.trainingIDs#" cfsqltype="CF_SQL_INTEGER" list="yes">
Anyone work with Oracle that can help me with this? I'm an experienced MS-SQL developer; Oracle is new to me.
Thanks,
^_^Nevermind.. a co-worker just told me that I still have to use parenthesis around the values for the IN clause.
-
Oracle 10g - Issue with Timestamp
Hi All,We are having an issue with Oracle 10g and Hyperion Intelligence Explorer 8.3.1.133I can only use ODBC to connect to 10g. If I use SQL Net as my connection source I get the dreaded "An unknown error has occurred".Hyperion support tells us to roll back to 8i or just use ODBC until patch released.Anybody know of any workarounds?Regards,Mike
Nevermind.. a co-worker just told me that I still have to use parenthesis around the values for the IN clause.
-
Oracle text - issue with contains query
Hello,
Need urgent help.
Following code in my procedure is giving me error.
TYPE c_1 is ref cursor;
result_cursor c1;
i_text2 := 'NEW%';
open result_cursor for
'select /*+ INDEX_SS_DESC(e cad_addr_idx2 )*/
from cad_address
where
contains(text, {:i_text2}, 1) > 0
and rec_type in (1,2,3,4)
order by occur_count desc'
using
i_text2;
ORA-00936: missing expression
ORA-06512: at "AV_OWNER.MY_PROC", line 43
ORA-06512: at line 6
Oracle version is 11.2.0.3.0.
Thanks,check your table is 'text indexed' on this 'Text' column.To knoow more about 'text index' go to
http://docs.oracle.com/cd/B19306_01/text.102/b14217/ind.htm
Also refer to the below thread where someone had faced issues with CONTAINS clause.
ORA-20000: Oracle Text error: DRG-10599: column is not indexed -
Oracle RAC One with SAP?
Hello,
are there any plans to release RAC One with SAP?
Will it be included in the general Oracle RAC 11.2 release for SAP?
Who can tell me the (list) price for Oracle RAC One for SAP systems?
The note 527843 doesn't help with any of these questions.
Regards,
MarkHello,
I am especially interested in the licence policy of RAC One.
Will it be part of standard or extended licence ???
Generally RAC One is an Oracle Option that just limits the RAC with 2 nodes.
If SAP makes certification for "RAC" generally and not for "RAC One" this would be
no technical reason.
If somebody authorized can answer my question this would be great.
Best Regards
Andreas -
Hi ,
I used oracle as Relational DB for ODI, At first time when I am configuring it is fine , let when I restart my computer ..it is unable to connect .
The error I am getting is
java.sql.SQLException: Listener refused the connection with the following error:
ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
The Connection descriptor used by the client was:
localhost:1521:hyperion
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:280)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:328)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:361)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:595)
at com.sunopsis.sql.SnpsConnection.u(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.c(SnpsConnection.java)
at com.sunopsis.sql.i.run(i.java)
From the error I believe its the issue with Oracle db port number, Here hyperion is SID,
now how to check the listener port number, if it is varying then how to make the portnumber static.
how to reslove this issue.
Thank YouAre you sure the oracle listener is up and running.
You could try the following from command line
tnsping <net service name>
Cheers
John
http://john-goodwin.blogspot.com/ -
Linux NSS DB Issue with Personal User/Client Certificate Friendly Names.
I have an issue with the NSSDB lib and my browsers in which client certificates I use for an application (Nessus Vulnerability Scanner) show up in the list with the same friendly name/nickname, making it very difficult to distinguish which certificate goes with which server.
Each certificate is generated on a different server with a different hostname but the same username. Upon importing the certificate into my browser, or even the pk12util command, the first certificate will appear correctly. However, importing additional certificates will just reuse the nickname from the first certificate instead of the nickname I chose. I have tested many different scenarios, and it doesn't seem the problem is related at all to the content of the nickname, so I have no idea how to force it to work correctly. I've searched around and found some indications of "nickname conflicts" and things, but nothing that helps me resolve the issue. I'm not sure if it's a bug or if it's some weird condition I've encountered.Maybe try to ask on the mozilla.dev.tech.crypto news group.
*https://developer.mozilla.org/en-US/docs/NSS
*news://news.mozilla.org/mozilla.dev.tech.crypto
*http://groups.google.com/group/mozilla.dev.tech.crypto -
Oracle JInitiator issue with Firefox 3 and IE7 - not working!
Hi,
I'm accessing the oracle apps server through VPN using a Windows Vista system running Firefox 3 and IE 7. I'm able to log on and access the self service pages correctly. But I'm unable to access the form based pages. If I use the JInitiator 1.3.1.21, both browsers crash (though Firefox says missing plugin and mentions this version only). On installing higher versions of the plugin (28, 30), IE 7 keeps giving the message "installing components...oajinit.exe" and there is no more progress.
Could anyone please let me know what could be the issue and how to resolve it.
Thanks in advance!As I don't have access to metalink yet, can you tell me for my configuration what is certified and what browser I should use? I already mentioned that my OS is Vista and I have IE7. I realise that IE6 cannot run on Vista and now Firefox 3 cannot be used. So what JInitiator should I use for IE 7?The currently supported desktops for Release 11i include:
- Win2K / WinXP + IE6 / Firefox 2.x
- WinXP + IE7 / Firefox 2.x
- Mac OS X v10.3.9 + Safari 1.3 and higher
- Mac OS X v10.4.7 + Safari 2.0 and higher
- Vista desktop clients running the native JRE plug-in on IE 7 ***
*** Oracle JInitiator Not Certified for Vista Desktops: Oracle JInitiator 1.3 will not be certified for Vista desktops. Jinitiator 1.3 is based on JDK 1.3. JDK 1.3 is not compatible with Vista. No new updates to JInitiator are planned for Vista.
Firefox 2 Certified on Vista for Oracle E-Business Suite
http://blogs.oracle.com/stevenChan/2008/04/firefox_2_certified_on_vista_f.html
Windows Vista + IE7 Certified with E-Business Suite
http://blogs.oracle.com/stevenChan/2007/11/windows_vista_ie7_certified_wi.html -
Oracle Per5formance Issue With Huge Data
Hi Everyone,
I needed one help from the techies here.
The issue I am facing is, I have got a set of oracle queries that I needed to execute often.
Previously the things were fine as the number of records were less.
But now I have gone into deep trouble as the new dump I have got is having tremendous amount of data.
For example one of the table my query used has got 8000000 records.
Can anyone tell me about the ways that I can use to improve the perforance level.
Most of the tables i have already seen are using indexes.
Thanks in Advanceuser12280955 wrote:
For example one of the table my query used has got 8000000 records.So? The number of rows does not determine performance.
SQL> set timing on
SQL> select count(*) from daily_xxxxx;
COUNT(*)
2332931003
Elapsed: 00:00:09.94Approx 1,125,793 I/O calls (majority logical and not physical) were needed and performed in 10 seconds.
Compare this to the following:
SQL> select count(*) from all_objects;
COUNT(*)
72873
Elapsed: 00:00:10.29A tiny percentage of rows in comparison with the 1st query above. 1,473,899 I/O calls make (majority also logical).
What are the common factors here? Elapsed execution time and the amount of I/O done. The execution time has nothing to do with the number of rows processed.
So if number of rows are effecting your database's performance, then your database design and physical implementation is not optimal - as it does not provide optimal I/O paths to the desired result sets that need to be determined by the database. In other words, the design is not scalable. Relational design is inherently scalable - when done correctly.
So I would think you need to review your design - both logical and physical.
Maybe you are looking for
-
Dear Friends, iam trying to crate a contineous check boxes using repeater command, and connecting an array as data provider. <mx:Repeater id="rp" dataProvider="{ac}" startingIndex="1"> <mx:CheckBox id="chk" label="label1" color="0xffffff" height="20"
-
How to connect an early 2009 MacBook Pro to a TV via HDMI
I have the cables and adapter but am only getting one image when all is hooked up.......what else need I do? I've seen youtube instructions but I seem to lack the "arrangement menu under the "displays" preference....... Is this MacBook unable to run
-
The current set up is that I have my home network both in wired and wireless mode. All MACs are connected wireless through the dual band router (2.4 GHz) and have access to a wireless shared printer. I have also wired connected my TV through the rou
-
Need help on how to a user can control a video clip using their mouse
I need help. I've got a video clip of a rotating 3D object(left to right) and i would like the user to be able to control the rotation of the object using their mouse. I've looked everywhere and i'm at a lost. Can anyone help me Here is a link to wha
-
I can't print the form correctly in Russian
Hello I have paid account for FormsCentral. Some of my forms are in Russian. I can create forms, my clients can fill in the forms and I can view the responses on the screen without any problem. But when I try print response or transform in in pdf I g