Linux Plug in?

The linux plugin download page seems to have a bad link:
fpdownload.macromedia.com server not found.
It's been like this for a few days for me. Any thoughts on
how to get the plugin?

Hi Dennis,
Thnaks for your support. Now I came to know absence of Installer option in Linux OS. What we can try is we create an Application to deploy the code.
Thanks,
Vivek

Similar Messages

  • Installing Oracle Linux 5.8 on Virtual Box

    I'm trying to install Oracle Linux 5.8 on Virtual Box. I have downloaded V31120-01 and burned to the DVD, I think successfully.
    However, when I start the Virtual machine, I get the Opening screen, "Oracle Linux" the little picture of the penguin guy, etc, so I think my DVD is good.
    The screen says, "To install or upgrade in graphical mode, press the <enter> key." So I do.
    Several lines of text flow across the screen, but then the process seems to stop with no prompt on what to do next or any indication that an error has occurred, it just stops.
    The last lines I can see are:
    ACPI: bus type pci registered
    PCI: Using configuration type 1
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: No dock devices found
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 5 devices
    usbcore: registered new driver usbfs
    usbcore: registerd new driver hub
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try 'pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPS0v4
    NetLabel: unlabeled traffic allowed by default
    ACPI: DMAR not present
    PCI-GART: No AMC northbridge found.
    NET: Registered protocol family 2
    I'm not sure if it's waiting for some input from me, or if there is a problem, but nothing happens beyond this point until I power down the virtual machine.

    There is no need to burn a DVD because Virtualbox can directly mount and boot from the .iso image you downloaded. It is usually a good idea to check the md5 checksum of your download with the number provided by the download page to verify your download is not corrupted. There are no problems installing any version of Oracle Linux under Virtualbox provided you have the right hardware. I suggest to check the Virtualbox documentation.
    Note: This is not a Virtualbox forum.

  • Java 64 bit plug-in

    The Blackdown Java project has a funtioning 64 bit plug-in for their JRE. The JRE is still at 1.4.2, but the plug-in works. The '03' release is the most current. The mirror list is here:
    http://www.blackdown.org/java-linux/java-linux-d2.html
    Don't use ftp.tux.org, it's painfully slow.

    jf/ wrote:
    AndyRTR wrote:You can do whatever you want with it. It won't go into official repos.
    erm... any reason why? care to explain?
    Hey. Three things I want to add to this discussion:
    1) Java works perfectly in Konqueror
    2) The Blackdown JRE is seriously buggy
    3) Sun caved and are trying to get the 64 bit Linux plug-in out with 1.6 (Mozilla only)

  • Long boot due to ata recognition problems [SOLVED]

    As the message says my boot is taking about 10 minutes, of which 95% of the time is spent trying to recognize ata4 device.
    I'm using the x86_64 version of arch, which works just fine on my laptop, and on my desktop - when it boots that is.
    Another thing that puzzles me is how am I getting those errors, considering I don't really have 4 ata drives, yet only two - hard disk and dvd rom.
    Anyway, this is my dmesg output :
    Linux version 2.6.24-ARCH (root@artin) (gcc version 4.3.0 (GCC) ) #1 SMP PREEMPT Sun Mar 30 10:50:22 CEST 2008
    Command line: root=/dev/sda1 ro vga=791
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
    BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
    BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
    BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    Entering add_active_range(0, 0, 159) 0 entries of 256 used
    Entering add_active_range(0, 256, 524000) 1 entries of 256 used
    end_pfn_map = 1048576
    DMI 2.4 present.
    ACPI: RSDP 000F9210, 0014 (r0 IntelR)
    ACPI: RSDT 7FEE3040, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
    ACPI: FACP 7FEE30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
    ACPI: DSDT 7FEE3180, 4BB6 (r1 INTELR AWRDACPI 1000 MSFT 100000E)
    ACPI: FACS 7FEE0000, 0040
    ACPI: HPET 7FEE7E80, 0038 (r1 IntelR AWRDACPI 42302E31 AWRD 98)
    ACPI: MCFG 7FEE7F00, 003C (r1 IntelR AWRDACPI 42302E31 AWRD 0)
    ACPI: APIC 7FEE7D80, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD 0)
    ACPI: SSDT 7FEE7F80, 015C (r1 PmRef Cpu0Ist 3000 INTL 20060912)
    ACPI: SSDT 7FEE8410, 02F1 (r1 PmRef CpuPm 3000 INTL 20040311)
    Entering add_active_range(0, 0, 159) 0 entries of 256 used
    Entering add_active_range(0, 256, 524000) 1 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    DMA32 4096 -> 1048576
    Normal 1048576 -> 1048576
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0 -> 159
    0: 256 -> 524000
    On node 0 totalpages: 523903
    DMA zone: 56 pages used for memmap
    DMA zone: 1354 pages reserved
    DMA zone: 2589 pages, LIFO batch:0
    DMA32 zone: 7108 pages used for memmap
    DMA32 zone: 512796 pages, LIFO batch:31
    Normal zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    ACPI: PM-Timer IO Port: 0x408
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 (Bootup-CPU)
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Setting APIC routing to flat
    ACPI: HPET id: 0x10b9a201 base: 0xfed00000
    Using ACPI (MADT) for SMP configuration information
    swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
    swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
    swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
    Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
    SMP: Allowing 4 CPUs, 2 hotplug CPUs
    PERCPU: Allocating 33200 bytes of per cpu data
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515385
    Kernel command line: root=/dev/sda1 ro vga=791
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 32768 bytes)
    hpet clockevent registered
    TSC calibrated against HPET
    time.c: Detected 2395.908 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    Checking aperture...
    Calgary: detecting Calgary via BIOS EBDA area
    Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    Memory: 2057296k/2096000k available (2958k kernel code, 38092k reserved, 1092k data, 248k init)
    SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1
    Calibrating delay using timer specific routine.. 4796.31 BogoMIPS (lpj=7990897)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 256
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    using mwait in idle threads.
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU0: Thermal monitoring enabled (TM1)
    SMP alternatives: switching to UP code
    Early unpacking initramfs... done
    ACPI: Core revision 20070126
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    Using local APIC timer interrupts.
    APIC timer calibration result 16638250
    Detected 16.638 MHz APIC timer.
    SMP alternatives: switching to SMP code
    Booting processor 1/2 APIC 0x1
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4793.45 BogoMIPS (lpj=7986329)
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU1: Thermal monitoring enabled (TM2)
    Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    net_namespace: 120 bytes
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using MMCONFIG at e0000000 - efffffff
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
    PCI quirk: region 0480-04bf claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 14 15)
    ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 14 15)
    ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 16 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    PCI-GART: No AMD northbridge found.
    ACPI: RTC can wake from S4
    Time: tsc clocksource has been installed.
    system 00:01: ioport range 0x4d0-0x4d1 has been reserved
    system 00:01: ioport range 0xa00-0xa7f has been reserved
    system 00:01: ioport range 0x880-0x88f has been reserved
    system 00:0c: ioport range 0x400-0x4bf could not be reserved
    system 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved
    system 00:0f: iomem range 0xf0000-0xfffff could not be reserved
    system 00:0f: iomem range 0xfed00000-0xfed000ff has been reserved
    system 00:0f: iomem range 0x7fee0000-0x7fefffff could not be reserved
    system 00:0f: iomem range 0x0-0x9ffff could not be reserved
    system 00:0f: iomem range 0x100000-0x7fedffff could not be reserved
    system 00:0f: iomem range 0xfec00000-0xfec00fff has been reserved
    system 00:0f: iomem range 0xfed14000-0xfed1dfff has been reserved
    system 00:0f: iomem range 0xfed20000-0xfed9ffff has been reserved
    system 00:0f: iomem range 0xfee00000-0xfee00fff could not be reserved
    system 00:0f: iomem range 0xffb00000-0xffb7ffff has been reserved
    system 00:0f: iomem range 0xfff00000-0xffffffff has been reserved
    system 00:0f: iomem range 0xe0000-0xeffff has been reserved
    PCI: Bridge: 0000:00:01.0
    IO window: d000-dfff
    MEM window: fa000000-fcffffff
    PREFETCH window: d0000000-dfffffff
    PCI: Bridge: 0000:00:1c.0
    IO window: b000-bfff
    MEM window: fdb00000-fdbfffff
    PREFETCH window: fdc00000-fdcfffff
    PCI: Bridge: 0000:00:1e.0
    IO window: c000-cfff
    MEM window: fde00000-fdefffff
    PREFETCH window: fdd00000-fddfffff
    ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 690k freed
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 [email protected]).
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:01:00.0
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:01.0:pcie00]
    Allocate Port Service[0000:00:01.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    Allocate Port Service[0000:00:1c.0:pcie03]
    vesafb: framebuffer at 0xd0000000, mapped to 0xffffc20010100000, using 3072k, total 262144k
    vesafb: mode is 1024x768x16, linelength=2048, pages=1
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    Linux agpgart interface v0.102
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    loop: module loaded
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    RPC: Registered udp transport module.
    RPC: Registered tcp transport module.
    Freeing unused kernel memory: 248k freed
    libata version 3.00 loaded.
    PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
    ACPI: PCI Interrupt 0000:02:00.1[b] -> GSI 17 (level, low) -> IRQ 17
    Switched to high resolution mode on CPU 1
    PCI: Setting latency timer of device 0000:02:00.1 to 64
    scsi0 : pata_jmicron
    Switched to high resolution mode on CPU 0
    scsi1 : pata_jmicron
    ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 17
    ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 17
    ata1.00: ATA-7: ST3200826A, 3.06, max UDMA/100
    ata1.00: 390721968 sectors, multi 0: LBA48
    ata1.01: ATAPI: HL-DT-ST DVDRAM GSA-4120B, A101, max UDMA/33
    ata1.00: configured for UDMA/100
    ata1.01: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA ST3200826A 3.06 PQ: 0 ANSI: 5
    scsi 0:0:1:0: CD-ROM HL-DT-ST DVDRAM GSA-4120B A101 PQ: 0 ANSI: 5
    ahci 0000:02:00.0: version 3.0
    ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    PCI: Setting latency timer of device 0000:02:00.0 to 64
    scsi2 : ahci
    scsi3 : ahci
    ata3: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe100 irq 16
    ata4: SATA max UDMA/133 abar m8192@0xfdbfe000 port 0xfdbfe180 irq 16
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 8 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 10 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 35 secs
    ata4: limiting SATA link speed to 1.5 Gbps
    ata4: classfication failed, assuming ATA
    ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
    ata4.00: qc timeout (cmd 0xec)
    ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata4: failed to recover some devices, retrying in 5 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 10 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 10 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 35 secs
    ata4: classfication failed, assuming ATA
    ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
    ata4.00: qc timeout (cmd 0xec)
    ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata4: failed to recover some devices, retrying in 5 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 10 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 10 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 35 secs
    ata4: classfication failed, assuming ATA
    ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
    ata4.00: qc timeout (cmd 0xec)
    ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata4: failed to recover some devices, retrying in 5 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 10 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 10 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 35 secs
    ata4: classfication failed, assuming ATA
    ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
    ata_piix 0000:00:1f.2: version 2.12
    ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi4 : ata_piix
    scsi5 : ata_piix
    ata5: SATA max UDMA/133 cmd 0xfa00 ctl 0xf900 bmdma 0xf600 irq 19
    ata6: SATA max UDMA/133 cmd 0xf800 ctl 0xf700 bmdma 0xf608 irq 19
    ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
    ACPI: PCI Interrupt 0000:00:1f.5[b] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1f.5 to 64
    scsi6 : ata_piix
    scsi7 : ata_piix
    ata7: SATA max UDMA/133 cmd 0xf300 ctl 0xf200 bmdma 0xef00 irq 19
    ata8: SATA max UDMA/133 cmd 0xf100 ctl 0xf000 bmdma 0xef08 irq 19
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.1[b] -> GSI 21 (level, low) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fd00
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fc00
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fb00
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
    usb 4-1: new low speed USB device using uhci_hcd and address 2
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 4 ports detected
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
    usb 4-1: string descriptor 0 read error: -71
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 6 ports detected
    usb 4-1: string descriptor 0 read error: -71
    usb 4-1: configuration #1 chosen from 1 choice
    usb 4-1: can't set config #1, error -71
    usb 4-1: USB disconnect, address 2
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    Driver 'sr' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:1:0: Attached scsi CD-ROM sr0
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    usb 4-1: new low speed USB device using uhci_hcd and address 3
    usb 4-1: configuration #1 chosen from 1 choice
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month
    r8169 Gigabit Ethernet driver 2.2LK loaded
    ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 21 (level, low) -> IRQ 21
    eth0: RTL8169sc/8110sc at 0xffffc20000024000, 00:16:17:b2:2b:11, XID 18000000 IRQ 21
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
    input: Power Button (FF) as /devices/virtual/input/input2
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /devices/virtual/input/input3
    ACPI: Power Button (CM) [PWRB]
    ACPI: Fan [FAN] (on)
    ACPI: SSDT 7FEE8380, 0087 (r1 PmRef Cpu1Ist 3000 INTL 20060912)
    ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
    ACPI Exception (processor_core-0816): AE_NOT_FOUND, Processor Device is not present [20070126]
    ACPI: Thermal Zone [THRM] (43 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 0:0:1:0: Attached scsi generic sg1 type 5
    ACPI: PCI Interrupt 0000:00:1f.3[b] -> GSI 19 (level, low) -> IRQ 19
    nvidia: module license 'NVIDIA' taints kernel.
    PPP generic driver version 2.4.2
    usbcore: registered new interface driver hiddev
    input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb4/4-1/4-1:1.0/input/input4
    lp: driver loaded but no devices found
    input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-1
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    ppdev: user-space parallel port driver
    ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:01:00.0 to 64
    NVRM: loading NVIDIA UNIX x86_64 Kernel Module 169.12 Thu Feb 14 17:51:09 PST 2008
    parport_pc 00:0a: reported by Plug and Play ACPI
    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    lp0: using parport0 (interrupt-driven).
    EXT3 FS on sda1, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 29294516k swap on /dev/sda3. Priority:-1 extents:1 across:29294516k
    r8169: eth0: link up
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    eth0: no IPv6 routers present
    That's the entire code, the part on which it holds on is :
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 8 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 10 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 35 secs
    ata4: limiting SATA link speed to 1.5 Gbps
    ata4: classfication failed, assuming ATA
    ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
    ata4.00: qc timeout (cmd 0xec)
    ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata4: failed to recover some devices, retrying in 5 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 10 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 10 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 35 secs
    ata4: classfication failed, assuming ATA
    ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
    ata4.00: qc timeout (cmd 0xec)
    ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata4: failed to recover some devices, retrying in 5 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 10 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 10 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 35 secs
    ata4: classfication failed, assuming ATA
    ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
    ata4.00: qc timeout (cmd 0xec)
    ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    ata4: failed to recover some devices, retrying in 5 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 10 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 10 secs
    ata4: classification failed
    ata4: reset failed (errno=-22), retrying in 35 secs
    ata4: classfication failed, assuming ATA
    ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 310)
    ata_piix 0000:00:1f.2: version 2.12
    ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
    Also I might add that on my first boot it didn't go this slow - I can't remember if I got the error or not though since I didn't pay attention.
    I don't think it's necessarily a hardware issue, even though this PC had it's issues with linux - had to flash my bios just so grub would detect hard drives, this doesn't seem like one of those.
    At least, I think it isn't since Mandriva booted just fine, and I don't think it's using a different kernel or some such, is it? Altough it was 32bit, but still, I find this quite odd.
    Now if this really is an error, not just buggy software, is there a way to ignore the error - I mean it boots up eventually anyway, just takes a hell of a lot of time.
    Last edited by gajo (2008-06-20 10:12:52)

    I'm going to bring up this issue again, still haven't fixed it and it remains unsolved with the newest kernel.
    The following links seem to have the same issue:
    http://www.ubuntu-forum.net/showthread.php?t=765486
    http://www.slackwarehelp.org/post-6750. … 194ecb9f80
    http://www.archlinux.it/forum/viewtopic.php?pid=11632
    http://www.linuxquestions.org/questions … 26-644368/
    Some of those threads link to this one as well, pretty much all seem to be unresolved or lack any given solution.
    One thing I noticed though, it seems that in nearly all cases the users report to have an MSI motherboard, coincidence? Hope so.
    Any clues on how one might fix this? Facts are, the kernel boots eventually, always, and it works like there is no problem; the issue is that it takes it's time, about 5-10 times the amount it would be normally (or before 2.6.x). Note that in the old kernel the delay was only about 5 seconds or less, with just one error message.
    Also, it seems to boot just fine in Windows, bit sad that Windows seems more stable/reliable eh?
    So where to next? I really want to fix this. It seems Google can't spit out the solution, should I report a bug to the kernel devs and pray that they look it up? Or perhaps it might be feasible to just change the source code of the kernel so it doesn't try 4 times for 10, 10, 30 seconds yet only once for 1 second? Surely it would be a matter of a simple for loop, just a matter of finding it!
    Please, even if you ain't got a solution to the particular issue, at least give me(and the people who google for the problem since this thread seems to be topping the results) an advice on what approach to take next, I'm fairly sure that everything can be fixed with common sense and a bit of C knowledge, only thing that's needed is a bit of experience.

  • The mouse is frozed

    hey
    i have the mouse Logitech mx500.
    i worked according the wiki (http://wiki.archlinux.org/index.php/Get … ns_Working)
    about month ago the mouse start to frozed.
    any idea?
    # nvidia-settings: X configuration file generated by nvidia-settings
    # nvidia-settings: version 1.0 (buildmeister@builder3) Wed Jun 13 18:40:26 PDT 2007
    # File generated by xorgconfig.
    # Copyright 2004 The X.Org Foundation
    # Permission is hereby granted, free of charge, to any person obtaining a
    # copy of this software and associated documentation files (the "Software"),
    # to deal in the Software without restriction, including without limitation
    # the rights to use, copy, modify, merge, publish, distribute, sublicense,
    # and/or sell copies of the Software, and to permit persons to whom the
    # Software is furnished to do so, subject to the following conditions:
    # The above copyright notice and this permission notice shall be included in
    # all copies or substantial portions of the Software.
    # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
    # The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
    # WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
    # OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    # SOFTWARE.
    # Except as contained in this notice, the name of The X.Org Foundation shall
    # not be used in advertising or otherwise to promote the sale, use or other
    # dealings in this Software without prior written authorization from
    # The X.Org Foundation.
    # Refer to the xorg.conf(5) man page for details about the format of
    # this file.
    # Module section -- this section is used to specify
    # which dynamically loadable modules to load.
    # Files section. This allows default font and rgb paths to be set
    # Server flags section.
    # Input devices
    # Core keyboard's InputDevice section
    # Core Pointer's InputDevice section
    # Other input device sections
    # this is optional and is required only if you
    # are using extended input devices. This is for example only. Refer
    # to the xorg.conf man page for a description of the options.
    # Section "InputDevice"
    # Identifier "Mouse2"
    # Driver "mouse"
    # Option "Protocol" "MouseMan"
    # Option "Device" "/dev/mouse2"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball"
    # Driver "magellan"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "spaceball2"
    # Driver "spaceorb"
    # Option "Device" "/dev/cua0"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen0"
    # Driver "microtouch"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "1412"
    # Option "MaxX" "15184"
    # Option "MinY" "15372"
    # Option "MaxY" "1230"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Section "InputDevice"
    # Identifier "touchscreen1"
    # Driver "elo2300"
    # Option "Device" "/dev/ttyS0"
    # Option "MinX" "231"
    # Option "MaxX" "3868"
    # Option "MinY" "3858"
    # Option "MaxY" "272"
    # Option "ScreenNumber" "0"
    # Option "ReportingMode" "Scaled"
    # Option "ButtonThreshold" "17"
    # Option "ButtonNumber" "1"
    # Option "SendCoreEvents"
    # EndSection
    # Monitor section
    # Any number of monitor sections may be present
    # Graphics device section
    # Any number of graphics device sections may be present
    # Standard VGA Device:
    # Device configured by xorgconfig:
    # Screen sections
    # Any number of screen sections may be present. Each describes
    # the configuration of a single screen. A single specific screen section
    # may be specified from the X server command line with the "-screen"
    # option.
    # ServerLayout sections.
    # Any number of ServerLayout sections may be present. Each describes
    # the way multiple screens are organised. A specific ServerLayout
    # section may be specified from the X server command line with the
    # "-layout" option. In the absence of this, the first section is used.
    # When now ServerLayout section is present, the first Screen section
    # is used alone.
    # Section "DRI"
    # Mode 0666
    # EndSection
    Section "ServerLayout"
    # The Identifier line must be present
    # Each Screen line specifies a Screen section name, and optionally
    # the relative position of other screens. The four names after
    # primary screen name are the screens to the top, bottom, left and right
    # of the primary screen. In this example, screen 2 is located to the
    # right of screen 1.
    # Each InputDevice line specifies an InputDevice section name and
    # optionally some options to specify the way the device is to be
    # used. Those options include "CorePointer", "CoreKeyboard" and
    # "SendCoreEvents".
    Identifier "Simple Layout"
    Screen 0 "Screen0" 0 0
    InputDevice "Evdev Mouse" "CorePointer"
    ##InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
    EndSection
    Section "Files"
    # The location of the RGB database. Note, this is the name of the
    # file minus the extension (like ".txt" or ".db"). There is normally
    # no need to change the default.
    # RgbPath "/usr/share/X11/rgb"
    # Multiple FontPath entries are allowed (which are concatenated together),
    # as well as specifying multiple comma-separated entries in one FontPath
    # command (or a combination of both methods)
    # FontPath "/usr/lib/X11/fonts/local/"
    # FontPath "/usr/lib/X11/fonts/misc/"
    # FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
    # FontPath "/usr/lib/X11/fonts/Speedo/"
    # FontPath "/usr/lib/X11/fonts/Type1/"
    # FontPath "/usr/lib/X11/fonts/TrueType/"
    # FontPath "/usr/lib/X11/fonts/freefont/"
    # FontPath "/usr/lib/X11/fonts/75dpi/"
    # FontPath "/usr/lib/X11/fonts/100dpi/"
    # The module search path. The default path is shown here.
    # ModulePath "/usr/lib/modules"
    FontPath "/usr/share/fonts/misc"
    FontPath "/usr/share/fonts/100dpi:unscaled"
    FontPath "/usr/share/fonts/75dpi:unscaled"
    FontPath "/usr/share/fonts/TTF"
    FontPath "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
    # This loads the DBE extension module.
    # This loads the miscellaneous extensions module, and disables
    # initialisation of the XFree86-DGA extension within that module.
    # This loads the font modules
    # Load "type1"
    # This loads the GLX module
    Load "glx"
    # This loads the DRI module
    # Load "dri"
    Load "dbe" # Double buffer extension
    SubSection "extmod"
    Option "omit xfree86-dga" # don't initialise the DGA extension
    EndSubSection
    Load "freetype"
    # Load "xtt"
    EndSection
    Section "ServerFlags"
    # Uncomment this to cause a core dump at the spot where a signal is
    # received. This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    # Option "NoTrapSignals"
    # Uncomment this to disable the <Ctrl><Alt><Fn> VT switch sequence
    # (where n is 1 through 12). This allows clients to receive these key
    # events.
    # Option "DontVTSwitch"
    # Uncomment this to disable the <Ctrl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    # Option "DontZap"
    # Uncomment this to disable the <Ctrl><Alt><KP_+>/<KP_-> mode switching
    # sequences. This allows clients to receive these key events.
    # Option "Dont Zoom"
    # Uncomment this to disable tuning with the xvidtune client. With
    # it the client can still run and fetch card and monitor attributes,
    # but it will not be allowed to change them. If it tries it will
    # receive a protocol error.
    # Option "DisableVidModeExtension"
    # Uncomment this to enable the use of a non-local xvidtune client.
    # Option "AllowNonLocalXvidtune"
    # Uncomment this to disable dynamically modifying the input device
    # (mouse and keyboard) settings.
    # Option "DisableModInDev"
    # Uncomment this to enable the use of a non-local client to
    # change the keyboard or mouse settings (currently only xset).
    # Option "AllowNonLocalModInDev"
    Option "Xinerama" "0"
    EndSection
    Section "InputDevice"
    # For most OSs the protocol can be omitted (it defaults to "Standard").
    # When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
    # uncomment the following line.
    # Option "Protocol" "Xqueue"
    # Option "Xleds" "1 2 3"
    # Option "LeftAlt" "Meta"
    # Option "RightAlt" "ModeShift"
    # To customise the XKB settings to suit your keyboard, modify the
    # lines below (which are the defaults). For example, for a non-U.S.
    # keyboard, you will probably want to use:
    # Option "XkbModel" "pc105"
    # If you have a US Microsoft Natural keyboard, you can use:
    # Option "XkbModel" "microsoft"
    # Then to change the language, change the Layout setting.
    # For example, a german layout can be obtained with:
    # Option "XkbLayout" "de"
    # or:
    # Option "XkbLayout" "de"
    # Option "XkbVariant" "nodeadkeys"
    # If you'd like to switch the positions of your capslock and
    # control keys, use:
    # Option "XkbOptions" "ctrl:swapcaps"
    # These are the default XKB settings for Xorg
    # Option "XkbRules" "xorg"
    # Option "XkbModel" "pc105"
    # Option "XkbLayout" "us"
    # Option "XkbVariant" ""
    # Option "XkbOptions" ""
    # Option "XkbDisable"
    ### Identifier "Keyboard1"
    ### Driver "kbd"
    ### Option "AutoRepeat" "500 30"
    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    ### Option "XkbRules" "xorg"
    ### Option "XkbModel" "pc101"
    ### Option "XkbLayout" "us"
    ### Option "XkbVariant" "uss"
    Identifier "Keyboard1"
    Driver "kbd"
    Option "XkbModel" "pc105"
    Option "XkbLayout" "us,il"
    Option "XkbOptions" "grp:alt_shift_toggle,grp_led:scroll"
    EndSection
    ##Section "InputDevice"
    # Identifier and driver
    # the following line.
    # Option "Protocol" "Xqueue"
    # Mouse-speed setting for PS/2 mouse.
    # Option "Resolution" "256"
    # Baudrate and SampleRate are only for some Logitech mice. In
    # almost every case these lines should be omitted.
    # Option "BaudRate" "9600"
    # Option "SampleRate" "150"
    # Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
    # horizontal wheel to buttons 6 & 7. Change if your mouse has more than
    # 3 buttons and you need to map the wheel to different button ids to avoid
    # conflicts.
    # Emulate3Timeout is the timeout in milliseconds (default is 50ms)
    # Option "Emulate3Buttons"
    # Option "Emulate3Timeout" "50"
    # ChordMiddle is an option for some 3-button Logitech mice
    # Option "ChordMiddle"
    ## Identifier "Mouse1"
    ## Driver "mouse"
    ## Option "Protocol" "Auto" # Auto detect
    # # Option "Device" "/dev/input/mice"
    # When using XQUEUE, comment out the above two lines, and uncomment
    ## Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    ##EndSection
    Section "InputDevice"
    Identifier "Evdev Mouse"
    Driver "evdev"
    Option "Name" "Logitech USB-PS/2 Optical Mouse"
    Option "CorePointer"
    EndSection
    #Section "InputDevice"
    # Identifier "Mouse1"
    # Driver "mouse"
    # Option "Protocol" "Auto" # Auto detect
    # Option "Device" "/dev/input/mice"
    # When using XQUEUE, comment out the above two lines, and uncomment
    # Option "ZAxisMapping" "4 5 6 7"
    # Emulate3Buttons is an option for 2-button mice
    #EndSection
    Section "Monitor"
    # HorizSync is in kHz unless units are specified.
    # HorizSync may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    # HorizSync 30-64 # multisync
    # HorizSync 31.5, 35.2 # multiple fixed sync frequencies
    # HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
    # VertRefresh is in Hz unless units are specified.
    # VertRefresh may be a comma separated list of discrete values, or a
    # comma separated list of ranges of values.
    # NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
    # USER MANUAL FOR THE CORRECT NUMBERS.
    Identifier "793df"
    HorizSync 31.5 - 64.3
    VertRefresh 50.0 - 70.0
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "DELL 2007WFP"
    HorizSync 30.0 - 83.0
    VertRefresh 56.0 - 76.0
    EndSection
    Section "Device"
    # The chipset line is optional in most cases. It can be used to override
    # the driver's chipset detection, and should not normally be specified.
    # Chipset "generic"
    # The Driver line must be present. When using run-time loadable driver
    # modules, this line instructs the server to load the specified driver
    # module. Even when not using loadable driver modules, this line
    # indicates which driver should interpret the information in this section.
    # The BusID line is used to specify which of possibly multiple devices
    # this section is intended for. When this line isn't present, a device
    # section can only match up with the primary video device. For PCI
    # devices a line like the following could be used. This line should not
    # normally be included unless there is more than one video device
    # intalled.
    # BusID "PCI:0:10:0"
    # VideoRam 256
    # Clocks 25.2 28.3
    Identifier "Standard VGA"
    Driver "vga"
    VendorName "Unknown"
    BoardName "Unknown"
    EndSection
    Section "Device"
    # unsupported card
    #VideoRam 262144
    # Insert Clocks lines here if appropriate
    Identifier "7600ga"
    Driver "nvidia"
    EndSection
    Section "Device"
    Identifier "Videocard0"
    Driver "nvidia"
    VendorName "NVIDIA Corporation"
    BoardName "GeForce 7600 GS"
    EndSection
    Section "Screen"
    Identifier "Screen 1"
    Device "7600ga"
    Monitor "793df"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 8
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1280x1024" "1024x768" "800x600" "640x480"
    EndSubSection
    EndSection
    Section "Screen"
    # Removed Option "metamodes" "1024x768_85 +0+0; 1024x768 +0+0; 800x600 +0+0; 640x480 +0+0"
    Identifier "Screen0"
    Device "Videocard0"
    Monitor "Monitor0"
    DefaultDepth 24
    Option "TwinView" "0"
    Option "metamodes" "1680x1050_60 +0+0; 800x600 +0+0; 640x480 +0+0"
    EndSection
    dmesg
    Linux version 2.6.23-ARCH (root@T-POWA-LX) (gcc version 4.2.2) #1 SMP PREEMPT Sun Nov 18 07:43:05 UTC 2007
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007fee0000 (usable)
    BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
    BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
    BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
    BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    1150MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000f5940
    Entering add_active_range(0, 0, 524000) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 524000
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 524000
    On node 0 totalpages: 524000
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 2301 pages used for memmap
    HighMem zone: 292323 pages, LIFO batch:31
    Movable zone: 0 pages used for memmap
    DMI 2.4 present.
    ACPI: RSDP 000F7620, 0024 (r2 Nvidia)
    ACPI: XSDT 7FEE30C0, 0044 (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
    ACPI: FACP 7FEEC480, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD 0)
    ACPI: DSDT 7FEE3240, 91E0 (r1 NVIDIA AWRDACPI 1000 MSFT 3000000)
    ACPI: FACS 7FEE0000, 0040
    ACPI: HPET 7FEEC680, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD 98)
    ACPI: MCFG 7FEEC700, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
    ACPI: APIC 7FEEC5C0, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD 0)
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 15:11 APIC version 16
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    Processor #1 15:11 APIC version 16
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    ACPI: IRQ14 used by override.
    ACPI: IRQ15 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    ACPI: HPET id: 0x10de8201 base: 0xfefff000
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
    swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
    swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
    swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
    Built 1 zonelists in Zone order. Total pages: 519907
    Kernel command line: root=/dev/sda2 ro vga=795
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 2009.278 MHz processor.
    spurious 8259A interrupt: IRQ7.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 2071656k/2096000k available (2445k kernel code, 23060k reserved, 817k data, 296k init, 1178496k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc0435000 - 0xc047f000 ( 296 kB)
    .data : 0xc0363479 - 0xc042fa5c ( 817 kB)
    .text : 0xc0100000 - 0xc0363479 (2445 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
    Calibrating delay using timer specific routine.. 4022.62 BogoMIPS (lpj=6701795)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU 0(2) -> Core 0
    CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Early unpacking initramfs... done
    ACPI: Core revision 20070126
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
    SMP alternatives: switching to SMP code
    Booting processor 1/1 eip 3000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 4020.99 BogoMIPS (lpj=6697594)
    CPU: After generic identify, caps: 178bfbff ebd3fbff 00000000 00000000 00002001 00000000 0000001f 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU 1(2) -> Core 1
    CPU: After all inits, caps: 178bfbff ebd3fbff 00000000 00000410 00002001 00000000 0000001f 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02
    Total of 2 processors activated (8042.61 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    Brought up 2 CPUs
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using MMCONFIG
    PCI: No mmconfig possible on device 00:18
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Transparent bridge - 0000:00:06.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
    ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 *11 14 15)
    ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15)
    ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
    ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
    ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
    ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 *11 14 15)
    ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
    ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
    ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
    ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 *10 11 14 15)
    ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
    ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
    ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
    ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
    ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
    ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
    ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
    ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 13 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    Time: hpet clocksource has been installed.
    Switched to high resolution mode on CPU 0
    Switched to high resolution mode on CPU 1
    pnp: 00:01: ioport range 0x1000-0x107f has been reserved
    pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
    pnp: 00:01: ioport range 0x1400-0x147f has been reserved
    pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
    pnp: 00:01: ioport range 0x1800-0x187f has been reserved
    pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
    pnp: 00:0b: iomem range 0xf0000000-0xf3ffffff could not be reserved
    pnp: 00:0c: iomem range 0xcde00-0xcffff has been reserved
    pnp: 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
    pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
    pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved
    PCI: Bridge: 0000:00:06.0
    IO window: disabled.
    MEM window: fde00000-fdefffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0a.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0b.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0c.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0d.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0e.0
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:0f.0
    IO window: a000-afff
    MEM window: fa000000-fcffffff
    PREFETCH window: e0000000-efffffff
    PCI: Setting latency timer of device 0000:00:06.0 to 64
    PCI: Setting latency timer of device 0000:00:0a.0 to 64
    PCI: Setting latency timer of device 0000:00:0b.0 to 64
    PCI: Setting latency timer of device 0000:00:0c.0 to 64
    PCI: Setting latency timer of device 0000:00:0d.0 to 64
    PCI: Setting latency timer of device 0000:00:0e.0 to 64
    PCI: Setting latency timer of device 0000:00:0f.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 1746k freed
    apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    apm: disabled - APM is not SMP safe.
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 [email protected]).
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:07:00.0
    PCI: Setting latency timer of device 0000:00:0a.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0a.0:pcie00]
    Allocate Port Service[0000:00:0a.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0b.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0b.0:pcie00]
    Allocate Port Service[0000:00:0b.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0c.0:pcie00]
    Allocate Port Service[0000:00:0c.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0d.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0d.0:pcie00]
    Allocate Port Service[0000:00:0d.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0e.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0e.0:pcie00]
    Allocate Port Service[0000:00:0e.0:pcie03]
    PCI: Setting latency timer of device 0000:00:0f.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:0f.0:pcie00]
    Allocate Port Service[0000:00:0f.0:pcie03]
    vesafb: framebuffer at 0xe0000000, mapped to 0xf8880000, using 10240k, total 262144k
    vesafb: mode is 1280x1024x32, linelength=5120, pages=0
    vesafb: protected mode interface info at c000:c300
    vesafb: pmi: set display start = c00cc336, set palette = c00cc3a0
    vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Console: switching to colour frame buffer device 160x64
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    loop: module loaded
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    serio: i8042 KBD port at 0x60,0x64 irq 1
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Freeing unused kernel memory: 296k freed
    libata version 2.21 loaded.
    pata_amd 0000:00:04.0: version 0.3.9
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    scsi0 : pata_amd
    scsi1 : pata_amd
    ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14
    ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15
    ata1.00: ATAPI: PIONEER DVD-RW DVR-111D, 1.23, max UDMA/66
    ata1.00: configured for UDMA/66
    ata2: port disabled. ignoring.
    scsi 0:0:0:0: CD-ROM PIONEER DVD-RW DVR-111D 1.23 PQ: 0 ANSI: 5
    sata_nv 0000:00:05.0: version 3.5
    ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 23 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:05.0 to 64
    scsi2 : sata_nv
    scsi3 : sata_nv
    ata3: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001dc00 irq 16
    ata4: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001dc08 irq 16
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:05.1[b] -> Link [APSJ] -> GSI 22 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:05.1 to 64
    scsi4 : sata_nv
    scsi5 : sata_nv
    ata5: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma 0x0001c800 irq 17
    ata6: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma 0x0001c808 irq 17
    ata5: SATA link down (SStatus 0 SControl 300)
    ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    ata6.00: ATA-7: WDC WD2500KS-00MJB0, 02.01C03, max UDMA/133
    ata6.00: 488397168 sectors, multi 1: LBA48
    ata6.00: configured for UDMA/133
    scsi 5:0:0:0: Direct-Access ATA WDC WD2500KS-00M 02.0 PQ: 0 ANSI: 5
    ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 21
    ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 21 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:05.2 to 64
    scsi6 : sata_nv
    scsi7 : sata_nv
    ata7: SATA max UDMA/133 cmd 0x0001c400 ctl 0x0001c002 bmdma 0x0001b400 irq 18
    ata8: SATA max UDMA/133 cmd 0x0001bc00 ctl 0x0001b802 bmdma 0x0001b408 irq 18
    ata7: SATA link down (SStatus 0 SControl 300)
    ata8: SATA link down (SStatus 0 SControl 300)
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCL] -> GSI 20 (level, low) -> IRQ 19
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    PCI: Setting latency timer of device 0000:00:02.1 to 64
    ehci_hcd 0000:00:02.1: EHCI Host Controller
    ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:02.1: debug port 1
    PCI: cache line size of 64 is not supported by device 0000:00:02.1
    ehci_hcd 0000:00:02.1: irq 19, io mem 0xfe02e000
    ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
    sd 5:0:0:0: [sda] Write Protect is off
    sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 5:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
    sd 5:0:0:0: [sda] Write Protect is off
    sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4 <<6>usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    sda5<6>hub 1-0:1.0: 10 ports detected
    sda6 >
    sd 5:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 0:0:0:0: Attached scsi CD-ROM sr0
    ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    ohci_hcd 0000:00:02.0: OHCI Host Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:02.0: irq 16, io mem 0xfe02f000
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 10 ports detected
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    usb 1-4: new high speed USB device using ehci_hcd and address 3
    usb 1-4: configuration #1 chosen from 1 choice
    hub 1-4:1.0: USB hub found
    hub 1-4:1.0: 4 ports detected
    usb 1-6: new high speed USB device using ehci_hcd and address 4
    usb 2-1: new low speed USB device using ohci_hcd and address 2
    forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
    ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:08.0 to 64
    forcedeth: using HIGHDMA
    usb 2-1: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver hiddev
    input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2
    input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-1
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    eth0: forcedeth.c: subsystem: 01043:8239 bound to 0000:00:08.0
    vboxdrv: Trying to deactivate the NMI watchdog permanently...
    vboxdrv: Successfully done.
    input: Power Button (FF) as /devices/virtual/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /devices/virtual/input/input4
    ACPI: Power Button (CM) [PWRB]
    ACPI: Fan [FAN] (on)
    ACPI: Thermal Zone [THRM] (40 C)
    PPP generic driver version 2.4.2
    sr 0:0:0:0: Attached scsi generic sg0 type 5
    sd 5:0:0:0: Attached scsi generic sg1 type 0
    i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
    i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
    ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
    ACPI: PCI Interrupt 0000:00:06.1[b] -> Link [AAZA] -> GSI 21 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:06.1 to 64
    rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one year, y3k
    parport_pc 00:09: reported by Plug and Play ACPI
    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    lp0: using parport0 (interrupt-driven).
    input: PC Speaker as /devices/platform/pcspkr/input/input5
    ppdev: user-space parallel port driver
    EXT3 FS on sda2, internal journal
    ReiserFS: sda3: found reiserfs format "3.6" with standard journal
    ReiserFS: sda3: using ordered data mode
    ReiserFS: sda3: journal params: device sda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda3: checking transaction log (sda3)
    ReiserFS: sda3: Using r5 hash to sort names
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda5, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda6, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    fuse init (API version 7.8)
    Linux agpgart interface v0.102
    nvidia: module license 'NVIDIA' taints kernel.
    ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
    ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [APC6] -> GSI 16 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:07:00.0 to 64
    NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
    it87: Found IT8716F chip at 0x290, revision 0
    it87: in3 is VCC (+5V)
    it87: in7 is VCCH (+5V Stand-By)
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    eth0: no IPv6 routers present

    You should be able to get some more precise information from your Xorg logs, but I would bet it is related to the evdev driver. Some of the options in your xorg.conf no longer work with the latest version. For now you should be able to either map your mouse directly to the appropriate /dev/event* entry or change to the standard mouse driver, both of those methods should be in the wiki.
    You are supposed to be able to use the evdev driver without the input section of your xorg.conf by using dbus/hal autodetection, but AFAIK at the moment the xorg-server package still isn't compiled with hal support, so you would have to patch and rebuild the package.

  • PCI slot in Thinkpad Dock II unusable

    Hello, I have a Thinkpad a22m 2628-S1U which can be used with the Thinkpad Dock II. To avoid feeling tempted to buy a new laptop I bought that dock as well as an ATI Radeon x1550 to put in its PCI slot. These items were said to be compatible on http://thinkwiki.org the Linux thinkpad wiki.
    Now that I've tried it out, I'm starting to think the contributors to that site were windows users who didn't read the topic. Starting up docked gave the following lspci output (notice there's no radeon card):
    00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
    00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
    00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
    00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem
    00:04.0 PCI bridge: Texas Instruments PCI2032 PCI Docking Bridge
    00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
    00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
    00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
    00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
    00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
    01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
    08:01.0 IDE interface: Silicon Image, Inc. PCI0648 (rev 01)
    08:02.0 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
    08:02.1 CardBus bridge: Texas Instruments PCI1420 PC card Cardbus Controller
    0f:00.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
    For comparison, here's what my lspci looks like undocked:
    00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 03)
    00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 03)
    00:02.0 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:02.1 CardBus bridge: Texas Instruments PCI1450 (rev 03)
    00:03.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 09)
    00:03.1 Serial controller: Xircom Mini-PCI V.90 56k Modem
    00:05.0 Multimedia audio controller: Cirrus Logic CS 4614/22/24/30 [CrystalClear SoundFusion Audio Accelerator] (rev 01)
    00:07.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
    00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)
    00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)
    00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 03)
    01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02)
    02:00.0 Ethernet controller: Atheros Communications Inc. AR2413 802.11bg NIC (rev 01)
    So a few parts of the dock are getting detected but not the most important parts. The error that I think is related to the absence of the graphics card appears in dmesg. Look for the part about "cannot allocate resource region":
    Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
    PAT disabled. Not yet verified on this CPU type.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    Entering add_active_range(0, 0, 131056) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 131056
    HighMem 131056 -> 131056
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 131056
    On node 0 totalpages: 131056
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 992 pages used for memmap
    Normal zone: 125968 pages, LIFO batch:31
    HighMem zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    ACPI: PM-Timer IO Port: 0x1008
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    SMP: Allowing 0 CPUs, 0 hotplug CPUs
    PERCPU: Allocating 39464 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (0140e000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Detected 697.417 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514452k/524224k available (2120k kernel code, 9264k reserved, 744k data, 264k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03d3000 - 0xc0415000 ( 264 kB)
    .data : 0xc031225e - 0xc03cc380 ( 744 kB)
    .text : 0xc0100000 - 0xc031225e (2120 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay using timer specific routine.. 973.82 BogoMIPS (lpj=1622127)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080321
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0e80)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (973.82 BogoMIPS).
    net_namespace: 652 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
    PCI: Using configuration type 1 for base access
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    PCI: Transparent bridge - 0000:00:04.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 9 10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 7
    PCI: setting IRQ 7 as level-triggered
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:08:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:08:02.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
    PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
    PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    PCI: region 0000:08:02.0/9 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: region 0000:08:02.1/9 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: region 0000:08:02.0/10 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: region 0000:08:02.1/10 too large: 0x0000000000000000-0x0000000003ffffff
    PCI: Bridge: 0000:00:01.0
    IO window: 2000-2fff
    MEM window: 0xf0200000-0xf02fffff
    PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
    PCI: Bus 15, cardbus bridge: 0000:00:02.0
    IO window: 0x00001400-0x000014ff
    IO window: 0x00001c00-0x00001cff
    PREFETCH window: 0x30000000-0x33ffffff
    MEM window: 0x34000000-0x37ffffff
    PCI: Bus 19, cardbus bridge: 0000:00:02.1
    IO window: 0x00003400-0x000034ff
    IO window: 0x00003800-0x000038ff
    PREFETCH window: 0x38000000-0x3bffffff
    MEM window: 0x3c000000-0x3fffffff
    PCI: Bus 9, cardbus bridge: 0000:08:02.0
    IO window: 0x00004000-0x000040ff
    IO window: 0x00004400-0x000044ff
    PCI: Bus 13, cardbus bridge: 0000:08:02.1
    IO window: 0x00004800-0x000048ff
    IO window: 0x00004c00-0x00004cff
    PCI: Bridge: 0000:00:04.0
    IO window: 4000-4fff
    MEM window: disabled.
    PREFETCH window: disabled.
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:08:02.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    ACPI: PCI Interrupt 0000:08:02.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 662k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 264k freed
    input: AT Translated Set 2 keyboard as /class/input/input1
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    Switched to high resolution mode on CPU 0
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI interrupt for device 0000:08:01.0 disabled
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:<4>Driver 'sr' needs updating - please use bus_type methods
    sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.20
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    e100: eth0: e100_probe: addr 0xf0120000, irq 10, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
    Linux agpgart interface v0.103
    agpgart: Detected an Intel 440BX Chipset.
    agpgart: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to: cpufreq changes.
    /proc/exmap: insert
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    Clocksource tsc unstable (delta = 142862014 ns)
    ACPI: LNXTHERM:01 is registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (49 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Yenta: ISA IRQ mask 0x0038, PCI irq 11
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x0038, PCI irq 9
    Socket status: 30000006
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Yenta: CardBus bridge found at 0000:08:02.0 [1014:0148]
    PCI: Bus 9, cardbus bridge: 0000:08:02.0
    IO window: 0x00004000-0x000040ff
    IO window: 0x00004400-0x000044ff
    PREFETCH window: 0x40400000-0x407fffff
    MEM window: 0x40800000-0x40bfffff
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.0, mfunc 0x00001002, devctl 0x66
    irq 11: nobody cared (try booting with the "irqpoll" option)
    Pid: 1799, comm: modprobe Tainted: P 2.6.26-ARCH #1
    [<c015a764>] __report_bad_irq+0x24/0x90
    [<c015aa52>] note_interrupt+0x282/0x2c0
    [<c0159e70>] handle_IRQ_event+0x30/0x60
    [<c015b2c3>] handle_level_irq+0xd3/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c0159e57>] handle_IRQ_event+0x17/0x60
    [<c015b26d>] handle_level_irq+0x7d/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c015007b>] show_initstate+0xb/0x50
    [<e0bd4830>] yenta_probe_cb_irq+0x80/0xf0 [yenta_socket]
    [<e0bd4bbb>] ti12xx_override+0x23b/0x6a0 [yenta_socket]
    [<c0210ce3>] pci_setup_cardbus+0x103/0x190
    [<e0bd5f02>] yenta_probe+0x5f2/0x643 [yenta_socket]
    [<c01cfa11>] sysfs_find_dirent+0x21/0x30
    [<c01d09c5>] sysfs_create_link+0x85/0x120
    [<c020b700>] pci_match_device+0xa0/0xc0
    [<c020b816>] pci_device_probe+0x56/0x80
    [<c026a9a6>] driver_probe_device+0x86/0x1a0
    [<c026ab31>] __driver_attach+0x71/0x80
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a2d4>] bus_for_each_dev+0x44/0x70
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a836>] driver_attach+0x16/0x20
    [<c026aac0>] __driver_attach+0x0/0x80
    [<c0269c67>] bus_add_driver+0x1a7/0x220
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026accc>] driver_register+0x5c/0x130
    [<c020ba4d>] __pci_register_driver+0x3d/0x80
    [<c0150738>] sys_init_module+0x148/0x1ca0
    [<c01a4bfa>] seq_open+0x3a/0x90
    [<c01c2aa6>] pde_users_dec+0x16/0x50
    [<e0bc9000>] hotplug_slot_attr_show+0x0/0x30 [pci_hotplug]
    [<c0268610>] device_remove_file+0x0/0x20
    [<c0103f73>] sysenter_past_esp+0x78/0xb1
    =======================
    handlers:
    [<e0a5f340>] (snd_cs46xx_interrupt+0x0/0x1e0 [snd_cs46xx])
    [<e0bd57e0>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
    Disabling IRQ #11
    pccard: CardBus card inserted into slot 0
    ath_pci 0000:0f:00.0: enabling device (0000 -> 0002)
    ACPI: PCI Interrupt 0000:0f:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    USB Universal Host Controller Interface driver v3.0
    input: Video Bus as /class/input/input7
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    PPP generic driver version 2.4.2
    Uniform Multi-Platform E-IDE driver
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x278, irq 5 [PCSPP,TRISTATE]
    MadWifi: ath_attach: Switching rfkill capability off.
    NET: Registered protocol family 23
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=11
    IrDA: Registered device irda0
    nsc-ircc, Found dongle: Reserved
    ppdev: user-space parallel port driver
    Yenta: ISA IRQ mask 0x0018, PCI irq 10
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    Yenta: CardBus bridge found at 0000:08:02.1 [1014:0148]
    PCI: Bus 13, cardbus bridge: 0000:08:02.1
    IO window: 0x00004800-0x000048ff
    IO window: 0x00004c00-0x00004cff
    PREFETCH window: 0x40c00000-0x40ffffff
    MEM window: 0x41000000-0x413fffff
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.1, mfunc 0x00001002, devctl 0x66
    irq 11: nobody cared (try booting with the "irqpoll" option)
    Pid: 1799, comm: modprobe Tainted: P 2.6.26-ARCH #1
    [<c015a764>] __report_bad_irq+0x24/0x90
    [<c015aa52>] note_interrupt+0x282/0x2c0
    [<c0159e70>] handle_IRQ_event+0x30/0x60
    [<c015b2c3>] handle_level_irq+0xd3/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c014007b>] set_process_cpu_timer+0x2b/0xd0
    [<c0159e57>] handle_IRQ_event+0x17/0x60
    [<c015b26d>] handle_level_irq+0x7d/0x100
    [<c010712b>] do_IRQ+0x3b/0x70
    [<c01049c7>] common_interrupt+0x23/0x28
    [<c015007b>] show_initstate+0xb/0x50
    [<e0bd4830>] yenta_probe_cb_irq+0x80/0xf0 [yenta_socket]
    [<e0bd4aff>] ti12xx_override+0x17f/0x6a0 [yenta_socket]
    [<c0210ce3>] pci_setup_cardbus+0x103/0x190
    [<e0bd5f02>] yenta_probe+0x5f2/0x643 [yenta_socket]
    [<c01cfa11>] sysfs_find_dirent+0x21/0x30
    [<c01d09c5>] sysfs_create_link+0x85/0x120
    [<c020b700>] pci_match_device+0xa0/0xc0
    [<c020b816>] pci_device_probe+0x56/0x80
    [<c026a9a6>] driver_probe_device+0x86/0x1a0
    [<c026ab31>] __driver_attach+0x71/0x80
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a2d4>] bus_for_each_dev+0x44/0x70
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026a836>] driver_attach+0x16/0x20
    [<c026aac0>] __driver_attach+0x0/0x80
    [<c0269c67>] bus_add_driver+0x1a7/0x220
    [<c020b760>] pci_device_remove+0x0/0x40
    [<c026accc>] driver_register+0x5c/0x130
    [<c020ba4d>] __pci_register_driver+0x3d/0x80
    [<c0150738>] sys_init_module+0x148/0x1ca0
    [<c01a4bfa>] seq_open+0x3a/0x90
    [<c01c2aa6>] pde_users_dec+0x16/0x50
    [<e0bc9000>] hotplug_slot_attr_show+0x0/0x30 [pci_hotplug]
    [<c0268610>] device_remove_file+0x0/0x20
    [<c0103f73>] sysenter_past_esp+0x78/0xb1
    =======================
    handlers:
    [<e0a5f340>] (snd_cs46xx_interrupt+0x0/0x1e0 [snd_cs46xx])
    [<e0bd57e0>] (yenta_interrupt+0x0/0xe0 [yenta_socket])
    [<e0ae4e30>] (ath_intr+0x0/0x4810 [ath_pci])
    Disabling IRQ #11
    Yenta: ISA IRQ mask 0x0018, PCI irq 10
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 7 (level, low) -> IRQ 7
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 7, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    CMD648: IDE controller (0x1095:0x0648 rev 0x01) at PCI slot 0000:08:01.0
    ACPI: PCI Interrupt 0000:08:01.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
    CMD648: 100% native mode on irq 9
    ide0: BM-DMA at 0x3000-0x3007
    ide1: BM-DMA at 0x3008-0x300f
    Probing IDE interface ide0...
    usb 1-1: new full speed USB device using uhci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    Probing IDE interface ide1...
    usb 1-1.4: new low speed USB device using uhci_hcd and address 3
    usb 1-1.4: configuration #1 chosen from 1 choice
    ide0 at 0x3020-0x3027,0x3016 on irq 9
    ide1 at 0x3018-0x301f,0x3012 on irq 9
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    lp0: using parport0 (interrupt-driven).
    usbcore: registered new interface driver hiddev
    input: Logitech Logitech USB Optical Mouse as /class/input/input9
    input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.4
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    JFS: nTxBlock = 4027, nTxLock = 32219
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    For comparison here is my dockless dmesg:
    Linux version 2.6.26-ARCH (root@T-POWA-LX) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Tue Sep 9 10:15:21 UTC 2008
    PAT disabled. Not yet verified on this CPU type.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    Entering add_active_range(0, 0, 131056) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 131056
    HighMem 131056 -> 131056
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 131056
    On node 0 totalpages: 131056
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 992 pages used for memmap
    Normal zone: 125968 pages, LIFO batch:31
    HighMem zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    ACPI: PM-Timer IO Port: 0x1008
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    SMP: Allowing 0 CPUs, 0 hotplug CPUs
    PERCPU: Allocating 39464 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130032
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (0140e000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    Detected 697.425 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514452k/524224k available (2120k kernel code, 9264k reserved, 744k data, 264k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee4000 - 0xfffff000 (1132 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03d3000 - 0xc0415000 ( 264 kB)
    .data : 0xc031225e - 0xc03cc380 ( 744 kB)
    .text : 0xc0100000 - 0xc031225e (2120 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay using timer specific routine.. 1396.15 BogoMIPS (lpj=2326640)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080321
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0a20)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (1396.15 BogoMIPS).
    net_namespace: 652 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
    PCI: Using configuration type 1 for base access
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
    PCI: setting IRQ 5 as level-triggered
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    PCI: Bridge: 0000:00:01.0
    IO window: 2000-2fff
    MEM window: 0xf0200000-0xf02fffff
    PREFETCH window: 0x00000000f8000000-0x00000000fbffffff
    PCI: Bus 2, cardbus bridge: 0000:00:02.0
    IO window: 0x00001400-0x000014ff
    IO window: 0x00001c00-0x00001cff
    PREFETCH window: 0x30000000-0x33ffffff
    MEM window: 0x34000000-0x37ffffff
    PCI: Bus 6, cardbus bridge: 0000:00:02.1
    IO window: 0x00003000-0x000030ff
    IO window: 0x00003400-0x000034ff
    PREFETCH window: 0x38000000-0x3bffffff
    MEM window: 0x3c000000-0x3fffffff
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 662k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 264k freed
    input: AT Translated Set 2 keyboard as /class/input/input1
    Switched to high resolution mode on CPU 0
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:<4>Driver 'sr' needs updating - please use bus_type methods
    sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.20
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
    e100: eth0: e100_probe: addr 0xf0120000, irq 9, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
    Linux agpgart interface v0.103
    agpgart: Detected an Intel 440BX Chipset.
    agpgart: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to: cpufreq changes.
    /proc/exmap: insert
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    Clocksource tsc unstable (delta = 142842086 ns)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    ACPI: LNXTHERM:01 is registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (50 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    spurious 8259A interrupt: IRQ7.
    Yenta: ISA IRQ mask 0x0498, PCI irq 11
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x0498, PCI irq 5
    Socket status: 30000006
    pccard: CardBus card inserted into slot 0
    ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
    ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 5, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    input: Video Bus as /class/input/input7
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    PPP generic driver version 2.4.2
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    NET: Registered protocol family 23
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    IrDA: Registered device irda0
    nsc-ircc, Found dongle: Reserved
    MadWifi: ath_attach: Switching rfkill capability off.
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=11
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    lp0: using parport0 (interrupt-driven).
    ppdev: user-space parallel port driver
    JFS: nTxBlock = 4027, nTxLock = 32219
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    I've tried multiple options in the BIOS. You can select AGP or PCI as the card for the root display device. The default is PCI so if there's a docked PCI card at POST, the BIOS will use that for the root display device... otherwise it will use the built in card. You can also select the root display device as LCD or CRT or both. The default is CRT so if there is an external monitor that's where the bootloader menu and such will appear, otherwise the laptop's own display gets used. Even if I've understood these incorrectly, all combinations yield a PCI video card that is not detected by lspci.
    I've also tried loading the module dock right after thinkpad_acpi. It loads and appears in lsmod but it doesn't help the situation at all. It also doesn't add a dock file to /proc/acpi/ibm. I also tried passing pci=routirq to the kernel, whatever that does and I've tried changing the four PCI related IRQ numbers in the BIOS and this has not helped.

    I did upgrade the kernel yesterday and it caused the syntax of dmesg to change somewhat. Here is a docked dmesg from 2.6.27:
    Linux version 2.6.27-ARCH (root@architect) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Oct 12 15:16:25 CEST 2008
    PAT WC disabled due to known CPU erratum.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    last_pfn = 0x1fff0 max_arch_pfn = 0x100000
    kernel direct mapping tables up to 1fff0000 @ 7000-d000
    RAMDISK: 00e4d000 - 00effb5b
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    mapped low ram: 0 - 1fff0000
    low ram: 00000000 - 1fff0000
    bootmap 00002000 - 00006000
    (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280]
    #4 [0000e4d000 - 0000effb5b] RAMDISK ==> [0000e4d000 - 0000effb5b]
    #5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
    #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
    #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
    #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x0001fff0
    HighMem 0x0001fff0 -> 0x0001fff0
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001fff0
    On node 0 totalpages: 130959
    free_area_init_node: node 0, pgdat c03d9580, node_mem_map c1000000
    DMA zone: 3967 pages, LIFO batch:0
    Normal zone: 125968 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (01402000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PERCPU: Allocating 39324 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    TSC: PIT calibration confirmed by PMTIMER.
    TSC: using PIT calibration value
    Detected 697.407 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514248k/524224k available (2151k kernel code, 9460k reserved, 844k data, 288k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03f3000 - 0xc043b000 ( 288 kB)
    .data : 0xc0319f76 - 0xc03ed360 ( 844 kB)
    .text : 0xc0100000 - 0xc0319f76 (2151 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 1395.93 BogoMIPS (lpj=2324690)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080609
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0e00)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (1395.93 BogoMIPS).
    net_namespace: 832 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=14
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
    PCI: 0000:00:02.0 reg 10 32bit mmio: [50000000, 50000fff]
    pci 0000:00:02.0: supports D1
    pci 0000:00:02.0: supports D2
    pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    PCI: 0000:00:02.1 reg 10 32bit mmio: [50100000, 50100fff]
    pci 0000:00:02.1: supports D1
    pci 0000:00:02.1: supports D2
    pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.1: PME# disabled
    PCI: 0000:00:03.0 reg 10 32bit mmio: [f0120000, f0120fff]
    PCI: 0000:00:03.0 reg 14 io port: [1800, 183f]
    PCI: 0000:00:03.0 reg 18 32bit mmio: [f0100000, f011ffff]
    PCI: 0000:00:03.0 reg 30 32bit mmio: [0, fffff]
    pci 0000:00:03.0: supports D1
    pci 0000:00:03.0: supports D2
    pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    PCI: 0000:00:03.1 reg 10 io port: [1840, 1847]
    PCI: 0000:00:03.1 reg 14 32bit mmio: [f0121000, f0121fff]
    pci 0000:00:03.1: supports D1
    pci 0000:00:03.1: supports D2
    pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.1: PME# disabled
    pci 0000:00:04.0: supports D1
    pci 0000:00:04.0: supports D2
    PCI: 0000:00:05.0 reg 10 32bit mmio: [f0122000, f0122fff]
    PCI: 0000:00:05.0 reg 14 32bit mmio: [f0000000, f00fffff]
    pci 0000:00:05.0: supports D1
    pci 0000:00:05.0: supports D2
    PCI: 0000:00:07.1 reg 20 io port: [1850, 185f]
    PCI: 0000:00:07.2 reg 20 io port: [1860, 187f]
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    PCI: 0000:01:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
    PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
    PCI: 0000:01:00.0 reg 18 32bit mmio: [f0200000, f0203fff]
    PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
    pci 0000:01:00.0: supports D1
    pci 0000:01:00.0: supports D2
    PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
    PCI: bridge 0000:00:01.0 32bit mmio: [f0200000, f02fffff]
    PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, fbffffff]
    PCI: 0000:08:01.0 reg 10 io port: [3020, 3027]
    PCI: 0000:08:01.0 reg 14 io port: [3014, 3017]
    PCI: 0000:08:01.0 reg 18 io port: [3018, 301f]
    PCI: 0000:08:01.0 reg 1c io port: [3010, 3013]
    PCI: 0000:08:01.0 reg 20 io port: [3000, 300f]
    pci 0000:08:01.0: supports D1
    pci 0000:08:01.0: supports D2
    PCI: 0000:08:02.0 reg 10 32bit mmio: [52000000, 52000fff]
    pci 0000:08:02.0: supports D1
    pci 0000:08:02.0: supports D2
    pci 0000:08:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:08:02.0: PME# disabled
    PCI: 0000:08:02.1 reg 10 32bit mmio: [53000000, 53000fff]
    pci 0000:08:02.1: supports D1
    pci 0000:08:02.1: supports D2
    pci 0000:08:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:08:02.1: PME# disabled
    pci 0000:00:04.0: transparent bridge
    PCI: bridge 0000:00:04.0 io port: [0, fff]
    PCI: bridge 0000:00:04.0 32bit mmio: [0, fffff]
    PCI: bridge 0000:00:04.0 32bit mmio pref: [0, fffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.DOCK._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 8 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:04.0 BAR 9 (0x0-0xfffff), disabling
    pnp 00:02: io resource (0x22-0x22) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:02: io resource (0x92-0x92) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:02: io resource (0xb2-0xb3) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp 00:0a: io resource (0x2e-0x2f) overlaps 0000:00:04.0 BAR 7 (0x0-0xfff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:08:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:08:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:04.0: BAR 7: can't allocate resource
    pci 0000:00:04.0: BAR 8: can't allocate resource
    pci 0000:00:04.0: BAR 9: can't allocate resource
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
    pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
    pci 0000:00:02.0: CardBus bridge, secondary bus 0000:0f
    pci 0000:00:02.0: IO window: 0x001400-0x0014ff
    pci 0000:00:02.0: IO window: 0x001c00-0x001cff
    pci 0000:00:02.0: PREFETCH window: 0x30000000-0x33ffffff
    pci 0000:00:02.0: MEM window: 0x34000000-0x37ffffff
    pci 0000:00:02.1: CardBus bridge, secondary bus 0000:13
    pci 0000:00:02.1: IO window: 0x003400-0x0034ff
    pci 0000:00:02.1: IO window: 0x003800-0x0038ff
    pci 0000:00:02.1: PREFETCH window: 0x38000000-0x3bffffff
    pci 0000:00:02.1: MEM window: 0x3c000000-0x3fffffff
    pci 0000:08:02.0: CardBus bridge, secondary bus 0000:09
    pci 0000:08:02.0: IO window: 0x004000-0x0040ff
    pci 0000:08:02.0: IO window: 0x004400-0x0044ff
    pci 0000:08:02.0: PREFETCH window: 0x48000000-0x4bffffff
    pci 0000:08:02.0: MEM window: 0x40000000-0x43ffffff
    pci 0000:08:02.1: CardBus bridge, secondary bus 0000:0d
    pci 0000:08:02.1: IO window: 0x004800-0x0048ff
    pci 0000:08:02.1: IO window: 0x004c00-0x004cff
    pci 0000:08:02.1: PREFETCH window: 0x4c000000-0x4fffffff
    pci 0000:08:02.1: MEM window: 0x44000000-0x47ffffff
    pci 0000:00:04.0: PCI bridge, secondary bus 0000:08
    pci 0000:00:04.0: IO window: 0x4000-0x4fff
    pci 0000:00:04.0: MEM window: 0x40000000-0x47ffffff
    pci 0000:00:04.0: PREFETCH window: 0x00000048000000-0x0000004fffffff
    pci 0000:00:02.0: power state changed by ACPI to D0
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:00:02.1: power state changed by ACPI to D0
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:08:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:08:02.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [0, ffffffff]
    bus: 01 index 0 io port: [2000, 2fff]
    bus: 01 index 1 mmio: [f0200000, f02fffff]
    bus: 01 index 2 mmio: [f8000000, fbffffff]
    bus: 01 index 3 mmio: [0, 0]
    bus: 0f index 0 io port: [1400, 14ff]
    bus: 0f index 1 io port: [1c00, 1cff]
    bus: 0f index 2 mmio: [30000000, 33ffffff]
    bus: 0f index 3 mmio: [34000000, 37ffffff]
    bus: 13 index 0 io port: [3400, 34ff]
    bus: 13 index 1 io port: [3800, 38ff]
    bus: 13 index 2 mmio: [38000000, 3bffffff]
    bus: 13 index 3 mmio: [3c000000, 3fffffff]
    bus: 08 index 0 io port: [4000, 4fff]
    bus: 08 index 1 mmio: [40000000, 47ffffff]
    bus: 08 index 2 mmio: [48000000, 4fffffff]
    bus: 08 index 3 io port: [0, ffff]
    bus: 08 index 4 mmio: [0, ffffffff]
    bus: 09 index 0 io port: [4000, 40ff]
    bus: 09 index 1 io port: [4400, 44ff]
    bus: 09 index 2 mmio: [48000000, 4bffffff]
    bus: 09 index 3 mmio: [40000000, 43ffffff]
    bus: 0d index 0 io port: [4800, 48ff]
    bus: 0d index 1 io port: [4c00, 4cff]
    bus: 0d index 2 mmio: [4c000000, 4fffffff]
    bus: 0d index 3 mmio: [44000000, 47ffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 714k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 288k freed
    Switched to high resolution mode on CPU 0
    input: AT Translated Set 2 keyboard as /class/input/input1
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    pata_acpi 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    pata_acpi 0000:08:01.0: PCI INT A disabled
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    Driver 'sr' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.21
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    e100 0000:00:03.0: PME# disabled
    e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1807kHz
    Linux agpgart interface v0.103
    agpgart-intel 0000:00:00.0: Intel 440BX Chipset
    agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to cpufreq changes
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    Clocksource tsc unstable (delta = 142865538 ns)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI0007:00: registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (24 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000006
    Yenta: CardBus bridge found at 0000:08:02.0 [1014:0148]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.0, mfunc 0x00001002, devctl 0x66
    irq 9: nobody cared (try booting with the "irqpoll" option)
    Pid: 1302, comm: modprobe Tainted: P 2.6.27-ARCH #1
    [<c015ce54>] __report_bad_irq+0x24/0x90
    [<c015d142>] note_interrupt+0x282/0x2c0
    [<c015c450>] handle_IRQ_event+0x30/0x60
    [<c015d9b3>] handle_level_irq+0xd3/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c0104927>] common_interrupt+0x23/0x28
    [<c03100d8>] cache_add_dev+0x272/0x44a
    [<c015c430>] handle_IRQ_event+0x10/0x60
    [<c015d95d>] handle_level_irq+0x7d/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c015cbc1>] setup_irq+0x121/0x250
    [<c0104927>] common_interrupt+0x23/0x28
    [<c015007b>] rt_mutex_adjust_prio_chain+0x20b/0x340
    [<e0c168cc>] yenta_probe_cb_irq+0x9c/0x110 [yenta_socket]
    [<e0c16c58>] ti12xx_override+0x238/0x6a0 [yenta_socket]
    [<e0c17fe2>] yenta_probe+0x622/0x673 [yenta_socket]
    [<c01d4012>] sysfs_add_one+0x12/0x50
    [<c01d40bd>] sysfs_addrm_start+0x6d/0xc0
    [<c0318f05>] _spin_unlock+0x5/0x20
    [<c020bce0>] pci_match_device+0xa0/0xc0
    [<c020c4b6>] pci_device_probe+0x56/0x80
    [<c026da76>] driver_probe_device+0x86/0x1a0
    [<c0318af4>] _spin_lock_irqsave+0x34/0x50
    [<c026dc01>] __driver_attach+0x71/0x80
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d3a4>] bus_for_each_dev+0x44/0x70
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d906>] driver_attach+0x16/0x20
    [<c026db90>] __driver_attach+0x0/0x80
    [<c026cd37>] bus_add_driver+0x1a7/0x220
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026dd9c>] driver_register+0x5c/0x130
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c020c6f7>] __pci_register_driver+0x47/0x90
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c010111a>] do_one_initcall+0x2a/0x160
    [<c0123480>] hrtick_start_fair+0x190/0x1b0
    [<c0126635>] check_preempt_wakeup+0xe5/0x120
    [<c0126def>] try_to_wake_up+0xaf/0x180
    [<c015474b>] sys_init_module+0x8b/0x1b0
    [<c0103ef3>] sysenter_do_call+0x12/0x33
    =======================
    handlers:
    [<c0229cfc>] (acpi_irq+0x0/0x1f)
    [<e0a663c0>] (snd_cs46xx_interrupt+0x0/0x1f0 [snd_cs46xx])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    Disabling IRQ #9
    pccard: CardBus card inserted into slot 0
    PCI: 0000:0f:00.0 reg 10 32bit mmio: [0, ffff]
    ath_pci 0000:0f:00.0: enabling device (0000 -> 0002)
    ath_pci 0000:0f:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    USB Universal Host Controller Interface driver v3.0
    input: Video Bus as /class/input/input7
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    Error: Driver 'pcspkr' is already registered, aborting...
    NET: Registered protocol family 23
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    IrDA: Registered device irda0
    nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
    PPP generic driver version 2.4.2
    Uniform Multi-Platform E-IDE driver
    MadWifi: ath_attach: Switching rfkill capability off.
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    ppdev: user-space parallel port driver
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=9
    Yenta: ISA IRQ mask 0x0038, PCI irq 11
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
    pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
    cmd64x 0000:08:01.0: IDE controller (0x1095:0x0648 rev 0x01)
    CMD64x_IDE 0000:08:01.0: PCI INT A -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    cmd64x 0000:08:01.0: 100% native mode on irq 9
    ide0: BM-DMA at 0x3000-0x3007
    ide1: BM-DMA at 0x3008-0x300f
    Probing IDE interface ide0...
    Probing IDE interface ide1...
    ide0 at 0x3020-0x3027,0x3016 on irq 9
    ide1 at 0x3018-0x301f,0x3012 on irq 9
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    Yenta: CardBus bridge found at 0000:08:02.1 [1014:0148]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:08:02.1, mfunc 0x00001002, devctl 0x66
    irq 9: nobody cared (try booting with the "irqpoll" option)
    Pid: 1302, comm: modprobe Tainted: P 2.6.27-ARCH #1
    [<c015ce54>] __report_bad_irq+0x24/0x90
    [<c015d142>] note_interrupt+0x282/0x2c0
    [<c015c450>] handle_IRQ_event+0x30/0x60
    [<c015d9b3>] handle_level_irq+0xd3/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c0104927>] common_interrupt+0x23/0x28
    [<c031007b>] cache_add_dev+0x215/0x44a
    [<c03100d8>] cache_add_dev+0x272/0x44a
    [<c015c430>] handle_IRQ_event+0x10/0x60
    [<c015d95d>] handle_level_irq+0x7d/0x100
    [<c010710b>] do_IRQ+0x3b/0x70
    [<c015cbc1>] setup_irq+0x121/0x250
    [<c0104927>] common_interrupt+0x23/0x28
    [<c015007b>] rt_mutex_adjust_prio_chain+0x20b/0x340
    [<e0c168cc>] yenta_probe_cb_irq+0x9c/0x110 [yenta_socket]
    [<e0c16b97>] ti12xx_override+0x177/0x6a0 [yenta_socket]
    [<e0c17fe2>] yenta_probe+0x622/0x673 [yenta_socket]
    [<c01d4012>] sysfs_add_one+0x12/0x50
    [<c01d40bd>] sysfs_addrm_start+0x6d/0xc0
    [<c0318f05>] _spin_unlock+0x5/0x20
    [<c020bce0>] pci_match_device+0xa0/0xc0
    [<c020c4b6>] pci_device_probe+0x56/0x80
    [<c026da76>] driver_probe_device+0x86/0x1a0
    [<c0318af4>] _spin_lock_irqsave+0x34/0x50
    [<c026dc01>] __driver_attach+0x71/0x80
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d3a4>] bus_for_each_dev+0x44/0x70
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026d906>] driver_attach+0x16/0x20
    [<c026db90>] __driver_attach+0x0/0x80
    [<c026cd37>] bus_add_driver+0x1a7/0x220
    [<c020c400>] pci_device_remove+0x0/0x40
    [<c026dd9c>] driver_register+0x5c/0x130
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c020c6f7>] __pci_register_driver+0x47/0x90
    [<e08be000>] yenta_socket_init+0x0/0x14 [yenta_socket]
    [<c010111a>] do_one_initcall+0x2a/0x160
    [<c0123480>] hrtick_start_fair+0x190/0x1b0
    [<c0126635>] check_preempt_wakeup+0xe5/0x120
    [<c0126def>] try_to_wake_up+0xaf/0x180
    [<c015474b>] sys_init_module+0x8b/0x1b0
    [<c0103ef3>] sysenter_do_call+0x12/0x33
    =======================
    handlers:
    [<c0229cfc>] (acpi_irq+0x0/0x1f)
    [<e0a663c0>] (snd_cs46xx_interrupt+0x0/0x1f0 [snd_cs46xx])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    [<e0c17880>] (yenta_interrupt+0x0/0xf0 [yenta_socket])
    [<e0b3fdf0>] (ath_intr+0x0/0x4880 [ath_pci])
    [<e0cf28a0>] (ide_intr+0x0/0x220 [ide_core])
    [<e0cf28a0>] (ide_intr+0x0/0x220 [ide_core])
    Disabling IRQ #9
    Yenta: ISA IRQ mask 0x0038, PCI irq 11
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
    cs: IO port probe 0x4000-0x4fff: clean.
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x47ffffff
    pcmcia: parent PCI bridge Memory window: 0x48000000 - 0x4fffffff
    uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 10, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    usb 1-1: new full speed USB device using uhci_hcd and address 2
    usb 1-1: configuration #1 chosen from 1 choice
    hub 1-1:1.0: USB hub found
    hub 1-1:1.0: 4 ports detected
    lp0: using parport0 (interrupt-driven).
    usb 1-1.4: new low speed USB device using uhci_hcd and address 3
    usb 1-1.4: configuration #1 chosen from 1 choice
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    usbcore: registered new interface driver hiddev
    input: Logitech Logitech USB Optical Mouse as /class/input/input9
    input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1.4
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    ACPI: EC: missing confirmations, switch off interrupt mode.
    JFS: nTxBlock = 4026, nTxLock = 32211
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    Note the "can't allocate resource areas"... And here is the new dockless dmesg:
    Linux version 2.6.27-ARCH (root@architect) (gcc version 4.3.2 (GCC) ) #1 SMP PREEMPT Sun Oct 12 15:16:25 CEST 2008
    PAT WC disabled due to known CPU erratum.
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
    BIOS-e820: 000000001fff0000 - 000000001fffec00 (ACPI data)
    BIOS-e820: 000000001fffec00 - 0000000020000000 (ACPI NVS)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    last_pfn = 0x1fff0 max_arch_pfn = 0x100000
    kernel direct mapping tables up to 1fff0000 @ 7000-d000
    RAMDISK: 00e4d000 - 00effb5b
    DMI 2.3 present.
    ACPI: RSDP 000F7160, 0014 (r0 PTLTD )
    ACPI: RSDT 1FFF53D5, 002C (r1 PTLTD RSDT 6040000 LTP 0)
    ACPI: FACP 1FFFEB65, 0074 (r1 IBM TP-13 6040000 0)
    ACPI: DSDT 1FFF5401, 9764 (r1 IBM TP-13 6040000 MSFT 100000C)
    ACPI: FACS 1FFFF000, 0040
    ACPI: BOOT 1FFFEBD9, 0027 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    0MB HIGHMEM available.
    511MB LOWMEM available.
    mapped low ram: 0 - 1fff0000
    low ram: 00000000 - 1fff0000
    bootmap 00002000 - 00006000
    (9 early reservations) ==> bootmem [0000000000 - 001fff0000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 000050c280] TEXT DATA BSS ==> [0000100000 - 000050c280]
    #4 [0000e4d000 - 0000effb5b] RAMDISK ==> [0000e4d000 - 0000effb5b]
    #5 [000050d000 - 0000510000] INIT_PG_TABLE ==> [000050d000 - 0000510000]
    #6 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
    #7 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000]
    #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
    Zone PFN ranges:
    DMA 0x00000000 -> 0x00001000
    Normal 0x00001000 -> 0x0001fff0
    HighMem 0x0001fff0 -> 0x0001fff0
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000000 -> 0x0000009f
    0: 0x00000100 -> 0x0001fff0
    On node 0 totalpages: 130959
    free_area_init_node: node 0, pgdat c03d9580, node_mem_map c1000000
    DMA zone: 3967 pages, LIFO batch:0
    Normal zone: 125968 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x1008
    SMP: Allowing 1 CPUs, 0 hotplug CPUs
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffb000 (01402000)
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    Allocating PCI resources starting at 30000000 (gap: 20000000:dff80000)
    PERCPU: Allocating 39324 bytes of per cpu data
    NR_CPUS: 16, nr_cpu_ids: 1, nr_node_ids 1
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129935
    Kernel command line: BOOT_IMAGE=arch ro root=802 hpet=force pci=routeirq acpi_osi=Linux panic=10
    ACPI: Added _OSI(Linux)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 8192 bytes)
    TSC: PIT calibration confirmed by PMTIMER.
    TSC: using PIT calibration value
    Detected 697.409 MHz processor.
    Console: colour VGA+ 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 514248k/524224k available (2151k kernel code, 9460k reserved, 844k data, 288k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
    lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
    .init : 0xc03f3000 - 0xc043b000 ( 288 kB)
    .data : 0xc0319f76 - 0xc03ed360 ( 844 kB)
    .text : 0xc0100000 - 0xc0319f76 (2151 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
    Calibrating delay loop (skipped), value calculated using timer frequency.. 1395.93 BogoMIPS (lpj=2324696)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 16K, L1 D cache: 16K
    CPU: L2 cache: 256K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20080609
    ACPI: Checking initramfs for custom DSDT
    ACPI: setting ELCR to 0200 (from 0e00)
    weird, boot CPU (#0) not listedby the BIOS.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    SMP disabled
    Brought up 1 CPUs
    Total of 1 processors activated (1395.93 BogoMIPS).
    net_namespace: 832 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: PCI BIOS revision 2.10 entry at 0xfd94f, last bus=7
    PCI: Using configuration type 1 for base access
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x9, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: 0000:00:00.0 reg 10 32bit mmio: [f4000000, f7ffffff]
    PCI: 0000:00:02.0 reg 10 32bit mmio: [50000000, 50000fff]
    pci 0000:00:02.0: supports D1
    pci 0000:00:02.0: supports D2
    pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    PCI: 0000:00:02.1 reg 10 32bit mmio: [50100000, 50100fff]
    pci 0000:00:02.1: supports D1
    pci 0000:00:02.1: supports D2
    pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:02.1: PME# disabled
    PCI: 0000:00:03.0 reg 10 32bit mmio: [f0120000, f0120fff]
    PCI: 0000:00:03.0 reg 14 io port: [1800, 183f]
    PCI: 0000:00:03.0 reg 18 32bit mmio: [f0100000, f011ffff]
    PCI: 0000:00:03.0 reg 30 32bit mmio: [0, fffff]
    pci 0000:00:03.0: supports D1
    pci 0000:00:03.0: supports D2
    pci 0000:00:03.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.0: PME# disabled
    PCI: 0000:00:03.1 reg 10 io port: [1840, 1847]
    PCI: 0000:00:03.1 reg 14 32bit mmio: [f0121000, f0121fff]
    pci 0000:00:03.1: supports D1
    pci 0000:00:03.1: supports D2
    pci 0000:00:03.1: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:00:03.1: PME# disabled
    PCI: 0000:00:05.0 reg 10 32bit mmio: [f0122000, f0122fff]
    PCI: 0000:00:05.0 reg 14 32bit mmio: [f0000000, f00fffff]
    pci 0000:00:05.0: supports D1
    pci 0000:00:05.0: supports D2
    PCI: 0000:00:07.1 reg 20 io port: [1850, 185f]
    PCI: 0000:00:07.2 reg 20 io port: [1860, 187f]
    pci 0000:00:07.3: quirk: region 1000-103f claimed by PIIX4 ACPI
    pci 0000:00:07.3: quirk: region 1040-104f claimed by PIIX4 SMB
    pci 0000:00:07.3: PIIX4 devres C PIO at 15e8-15ef
    pci 0000:00:07.3: PIIX4 devres I PIO at 03f0-03f7
    pci 0000:00:07.3: PIIX4 devres J PIO at 002e-002f
    PCI: 0000:01:00.0 reg 10 32bit mmio: [f8000000, fbffffff]
    PCI: 0000:01:00.0 reg 14 io port: [2000, 20ff]
    PCI: 0000:01:00.0 reg 18 32bit mmio: [f0200000, f0203fff]
    PCI: 0000:01:00.0 reg 30 32bit mmio: [0, 1ffff]
    pci 0000:01:00.0: supports D1
    pci 0000:01:00.0: supports D2
    PCI: bridge 0000:00:01.0 io port: [2000, 2fff]
    PCI: bridge 0000:00:01.0 32bit mmio: [f0200000, f02fffff]
    PCI: bridge 0000:00:01.0 32bit mmio pref: [f8000000, fbffffff]
    bus 00 -> node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11)
    ACPI: Power Resource [PSER] (off)
    ACPI: Power Resource [PSIO] (on)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:00: mem resource (0x0-0x9ffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc0000-0xc3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc4000-0xc7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xc8000-0xcbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xcc000-0xcffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd0000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd4000-0xd3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xd8000-0xd7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xdc000-0xdbfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe0000-0xe3fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe4000-0xe7fff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xe8000-0xebfff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xec000-0xeffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp 00:00: mem resource (0xf0000-0xfffff) overlaps 0000:00:03.0 BAR 6 (0x0-0xfffff), disabling
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    pci 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:00: iomem range 0x100000-0x1fffffff could not be reserved
    system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:02: ioport range 0x1000-0x103f has been reserved
    system 00:02: ioport range 0x1040-0x104f has been reserved
    system 00:02: ioport range 0xfe00-0xfe0f has been reserved
    system 00:09: ioport range 0x15e0-0x15ef has been reserved
    pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:01.0: IO window: 0x2000-0x2fff
    pci 0000:00:01.0: MEM window: 0xf0200000-0xf02fffff
    pci 0000:00:01.0: PREFETCH window: 0x000000f8000000-0x000000fbffffff
    pci 0000:00:02.0: CardBus bridge, secondary bus 0000:02
    pci 0000:00:02.0: IO window: 0x001400-0x0014ff
    pci 0000:00:02.0: IO window: 0x001c00-0x001cff
    pci 0000:00:02.0: PREFETCH window: 0x30000000-0x33ffffff
    pci 0000:00:02.0: MEM window: 0x34000000-0x37ffffff
    pci 0000:00:02.1: CardBus bridge, secondary bus 0000:06
    pci 0000:00:02.1: IO window: 0x003000-0x0030ff
    pci 0000:00:02.1: IO window: 0x003400-0x0034ff
    pci 0000:00:02.1: PREFETCH window: 0x38000000-0x3bffffff
    pci 0000:00:02.1: MEM window: 0x3c000000-0x3fffffff
    pci 0000:00:02.0: power state changed by ACPI to D0
    pci 0000:00:02.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    pci 0000:00:02.1: power state changed by ACPI to D0
    pci 0000:00:02.1: PCI INT B -> Link[LNKB] -> GSI 9 (level, low) -> IRQ 9
    bus: 00 index 0 io port: [0, ffff]
    bus: 00 index 1 mmio: [0, ffffffff]
    bus: 01 index 0 io port: [2000, 2fff]
    bus: 01 index 1 mmio: [f0200000, f02fffff]
    bus: 01 index 2 mmio: [f8000000, fbffffff]
    bus: 01 index 3 mmio: [0, 0]
    bus: 02 index 0 io port: [1400, 14ff]
    bus: 02 index 1 io port: [1c00, 1cff]
    bus: 02 index 2 mmio: [30000000, 33ffffff]
    bus: 02 index 3 mmio: [34000000, 37ffffff]
    bus: 06 index 0 io port: [3000, 30ff]
    bus: 06 index 1 io port: [3400, 34ff]
    bus: 06 index 2 mmio: [38000000, 3bffffff]
    bus: 06 index 3 mmio: [3c000000, 3fffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 714k freed
    Simple Boot Flag at 0x35 set to 0x1
    IBM machine detected. Enabling interrupts during APM calls.
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1006
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:00:00.0: Limiting direct PCI/PCI transfers
    pci 0000:00:03.0: Firmware left e100 interrupts enabled; disabling
    pci 0000:01:00.0: Boot video device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver4 ports, IRQ sharing disabled
    serial 00:0c: activated
    00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial 0000:00:03.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 288k freed
    Switched to high resolution mode on CPU 0
    input: AT Translated Set 2 keyboard as /class/input/input1
    ACPI: ACPI Dock Station Driver
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ata_piix 0000:00:07.1: version 2.12
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0x1850 irq 14
    ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0x1858 irq 15
    ata1.00: ATA-6: TOSHIBA MK1032GAX, AB211A, max UDMA/100
    ata1.00: 195371568 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/33
    ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T20L, NR02, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GA AB21 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T20L NR02 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    Driver 'sr' needs updating - please use bus_type methods
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ReiserFS: sda2: found reiserfs format "3.6" with standard journal
    ReiserFS: sda2: using ordered data mode
    ReiserFS: sda2: journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: sda2: checking transaction log (sda2)
    ReiserFS: sda2: Using r5 hash to sort names
    rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    Non-volatile memory driver v1.2
    thinkpad_acpi: ThinkPad ACPI Extras v0.21
    thinkpad_acpi: http://ibm-acpi.sf.net/
    thinkpad_acpi: ThinkPad BIOS 13ET14WW (1.00c), EC unknown
    Registered led device: tpacpi::thinklight
    thinkpad_acpi: another device driver is already handling bay events
    thinkpad_acpi: disabling subdriver bay
    Registered led device: tpacpi::power
    Registered led device: tpacpi:orange:batt
    Registered led device: tpacpi:green:batt
    Registered led device: tpacpi::dock_active
    Registered led device: tpacpi::bay_active
    Registered led device: tpacpi::dock_batt
    Registered led device: tpacpi::unknown_led
    Registered led device: tpacpi::standby
    input: ThinkPad Extra Buttons as /class/input/input2
    e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
    e100: Copyright(c) 1999-2006 Intel Corporation
    e100 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
    e100 0000:00:03.0: PME# disabled
    e100: eth0: e100_probe: addr 0xf0120000, irq 11, MAC addr 00:03:47:0f:de:3d
    eepro100.c:v1.09j-t 9/29/99 Donald Becker
    eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <[email protected]> and others
    Sound Fusion CS46xx 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    gameport: CS46xx Gameport is pci0000:00:05.0/gameport0, speed 1864kHz
    Linux agpgart interface v0.103
    agpgart-intel 0000:00:00.0: Intel 440BX Chipset
    agpgart-intel 0000:00:00.0: AGP aperture is 64M @ 0xf4000000
    [drm] Initialized drm 1.1.0 20060810
    pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    [drm] Initialized r128 2.5.0 20030725 on minor 0
    ath_hal: module license 'Proprietary' taints kernel.
    AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    fuse init (API version 7.9)
    Marking TSC unstable due to cpufreq changes
    ACPI: AC Adapter [AC] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input3
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input5
    ACPI: Sleep Button (CM) [SLPB]
    Clocksource tsc unstable (delta = 142862504 ns)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    processor ACPI0007:00: registered as cooling_device0
    ACPI: Processor [CPU] (supports 8 throttling states)
    thermal LNXTHERM:01: registered as thermal_zone0
    ACPI: Thermal Zone [THM0] (34 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    Yenta: CardBus bridge found at 0000:00:02.0 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.0, mfunc 0x00001000, devctl 0x66
    spurious 8259A interrupt: IRQ7.
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000020
    Yenta: CardBus bridge found at 0000:00:02.1 [1014:0130]
    Yenta: Using INTVAL to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:00:02.1, mfunc 0x00001000, devctl 0x66
    Yenta: ISA IRQ mask 0x00b8, PCI irq 9
    Socket status: 30000006
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    pccard: CardBus card inserted into slot 0
    PCI: 0000:02:00.0 reg 10 32bit mmio: [0, ffff]
    ath_pci 0000:02:00.0: enabling device (0000 -> 0002)
    ath_pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 9 (level, low) -> IRQ 9
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    input: PC Speaker as /class/input/input6
    USB Universal Host Controller Interface driver v3.0
    uhci_hcd 0000:00:07.2: PCI INT D -> Link[LNKD] -> GSI 10 (level, low) -> IRQ 10
    uhci_hcd 0000:00:07.2: UHCI Host Controller
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:07.2: irq 10, io base 0x00001860
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    piix4_smbus 0000:00:07.3: IBM system detected; this module may corrupt your serial eeprom! Refusing to load module!
    piix4_smbus: probe of 0000:00:07.3 failed with error -1
    Error: Driver 'pcspkr' is already registered, aborting...
    usb 1-1: new low speed USB device using uhci_hcd and address 2
    input: Video Bus as /class/input/input7
    usb 1-1: configuration #1 chosen from 1 choice
    ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
    IBM TrackPoint firmware: 0x0e, buttons: 3/3
    input: TPPS/2 IBM TrackPoint as /class/input/input8
    NET: Registered protocol family 23
    parport_pc 00:0d: activated
    parport_pc 00:0d: reported by Plug and Play ACPI
    parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
    nsc-ircc 00:0e: activated
    nsc-ircc, chip->init
    nsc-ircc, Found chip at base=0x02e
    nsc-ircc, driver loaded (Dag Brattli)
    IrDA: Registered device irda0
    nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
    PPP generic driver version 2.4.2
    MadWifi: ath_attach: Switching rfkill capability off.
    wifi0: Atheros AR2413 chip found (MAC 7.8, PHY 2112A 4.5, Radio 5.6)
    lp0: using parport0 (interrupt-driven).
    ath_pci: wifi0: Atheros 5212: mem=0x34000000, irq=9
    ppdev: user-space parallel port driver
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    usbcore: registered new interface driver hiddev
    input: Logitech Logitech USB Optical Mouse as /class/input/input9
    input,hidraw0: USB HID v1.11 Mouse [Logitech Logitech USB Optical Mouse] on usb-0000:00:07.2-1
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    JFS: nTxBlock = 4026, nTxLock = 32211
    Adding 1100444k swap on /dev/sda4. Priority:-1 extents:1 across:1100444k
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    conservative governor failed, too long transition latency of HW, fallback to performance governor
    thinkpad_acpi: requested hot key mask 0x0000ffff, forced to 0x00008000 (NVRAM poll mask is 0x00fb8000): no firmware mask support
    The strangest thing has also happened recently. The laptop refuses to use its own display when starting up in the dock unless an external monitor is plugged in. If a CRT is plugged in, the docked laptop starts up and shows the splash screen on its LCD. If no CRT is plugged in, turning on the docked laptop results in a blank screen. This might have happened because I fiddled with the BIOS which would make alot of sense but resetting the BIOS to default configuration hasn't fixed the problem. I also could have broken a pin but the last thing I remember doing before this happened is running cat /sys/module/snd_ac97_codec/parameters/power_save. It's one of those untouchable virtual files that causes a kernel oops when I try to read it sometimes. I have no idea how this would break the dock but it doesn't matter. Even if using the dock requires some external monitor jazz, I still want the card to be detected and it isn't.
    Sorry to bombard you with obscure information but I don't know where else to turn. I've asked on the thinkpad mailing list and IRC channel to no response and I've seen one other "knowledgeable person" mention these errors on the LKML. I will subscribe to that and ask him too. I'm just very surprised... this gave me the impression that what I wanted to do would work trivially and automatically on Linux and now I'm finding that it's broken for me and possibly every other Linux user. I will seek out thinkpad users from around here with all types of models and distros and see if they have any luck. So far Arch, Arch install CD and an ancient Ubuntu install CD don't work here. If anyone has this and can test it or can decipher some ideas from the posted output (new kernel parameters, new kernel config flags, new udev rules, new modules?) I'd really appreciate it.

  • Kernel 2.6.25 upgrade = MadWifi: unable to attach hardware [SOLVED]

    Hello,
    After I upgraded my kernel to 2.6.25 on my laptop with an Atheros AR242x, which I use normally use MadWifi with, stopped working. I am unable to get any wifi0 or ath0 device to show up in ifconfig. The most descriptive error I could pull up was "MadWifi: unable to attach hardware: 'Hardware didn't respond as expected' (HAL status 3)" out of dmesg, which you can see below. It was suggested in the IRC channel I compile MadWifi from testing out of abs which I did but it didn't seem to change anything.
    Linux version 2.6.25-ARCH (root@architect) (gcc version 4.3.0 (GCC) ) #1 SMP PREEMPT Sat Apr 19 15:39:26 CEST 2008
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
    BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 0000000037e80000 (usable)
    BIOS-e820: 0000000037e80000 - 0000000037e92000 (ACPI data)
    BIOS-e820: 0000000037e92000 - 0000000037f00000 (ACPI NVS)
    BIOS-e820: 0000000037f00000 - 0000000038000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    894MB LOWMEM available.
    Scan SMP from c0000000 for 1024 bytes.
    Scan SMP from c009fc00 for 1024 bytes.
    Scan SMP from c00f0000 for 65536 bytes.
    found SMP MP-table at [c00f7c60] 000f7c60
    Entering add_active_range(0, 0, 228992) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 228992
    HighMem 228992 -> 228992
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 228992
    On node 0 totalpages: 228992
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1757 pages used for memmap
    Normal zone: 223139 pages, LIFO batch:31
    HighMem zone: 0 pages used for memmap
    Movable zone: 0 pages used for memmap
    DMI present.
    ACPI: RSDP 000F7BB0, 0014 (r0 TOSINV)
    ACPI: RSDT 37E8AD9E, 0040 (r1 TOSINV TOSINV00 6040000 LTP 0)
    ACPI: FACP 37E91D8A, 0074 (r1 TOSINV Bonefish 6040000 ATI F4240)
    ACPI: DSDT 37E8BAC8, 62C2 (r1 TOSINV SB450 6040000 MSFT 100000E)
    ACPI: FACS 37E92FC0, 0040
    ACPI: APIC 37E91DFE, 0050 (r1 TOSINV APIC 6040000 LTP 0)
    ACPI: SLIC 37E91E4E, 0176 (r1 TOSINV TOSINV00 6040000 INV 0)
    ACPI: MCFG 37E91FC4, 003C (r1 TOSINV MCFG 6040000 LTP 0)
    ACPI: SSDT 37E8B5B0, 0518 (r1 PmRef Cpu0Cst 3001 INTL 20050228)
    ACPI: SSDT 37E8B351, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228)
    ACPI: SSDT 37E8ADDE, 0573 (r1 PmRef CpuPm 3000 INTL 20050228)
    ACPI: DMI detected: Toshiba
    ATI board detected. Disabling timer routing over 8254.
    ACPI: PM-Timer IO Port: 0x8008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 6:14 APIC version 20
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 40000000 (gap: 38000000:a8000000)
    PM: Registered nosave memory: 000000000009d000 - 000000000009e000
    PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
    PM: Registered nosave memory: 00000000000dc000 - 00000000000e0000
    PM: Registered nosave memory: 00000000000e0000 - 00000000000e4000
    PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227203
    Kernel command line: root=/dev/sda1 ro vga=773
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 1729.253 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 902908k/915968k available (2075k kernel code, 12516k reserved, 712k data, 268k init, 0k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf7e80000 ( 894 MB)
    .init : 0xc03bf000 - 0xc0402000 ( 268 kB)
    .data : 0xc0306cf8 - 0xc03b8e80 ( 712 kB)
    .text : 0xc0100000 - 0xc0306cf8 (2075 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    CPA: page pool initialized 1 of 1 pages preallocated
    SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
    Calibrating delay using timer specific routine.. 3462.16 BogoMIPS (lpj=5768270)
    Security Framework initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 1024K
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    using mwait in idle threads.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 9k freed
    ACPI: Core revision 20070126
    ACPI: Checking initramfs for custom DSDT
    CPU0: Intel(R) Celeron(R) M CPU 430 @ 1.73GHz stepping 0c
    Total of 1 processors activated (3462.16 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
    Brought up 1 CPUs
    net_namespace: 548 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using MMCONFIG for extended config space
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: BIOS _OSI(Linux) query ignored via DMI
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: EC: non-query interrupt received, switching to interrupt mode
    ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62
    ACPI: EC: driver started in interrupt mode
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Transparent bridge - 0000:00:14.4
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
    ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7) *0, disabled.
    ACPI: Power Resource [FN00] (off)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
    system 00:08: ioport range 0x1080-0x1080 has been reserved
    system 00:08: ioport range 0x220-0x22f has been reserved
    system 00:08: ioport range 0x400-0x401 has been reserved
    system 00:08: ioport range 0x40b-0x40b has been reserved
    system 00:08: ioport range 0x4d0-0x4d1 has been reserved
    system 00:08: ioport range 0x4d6-0x4d6 has been reserved
    system 00:08: ioport range 0x530-0x537 has been reserved
    system 00:08: ioport range 0xc00-0xc01 has been reserved
    system 00:08: ioport range 0xc14-0xc14 has been reserved
    system 00:08: ioport range 0xc50-0xc52 has been reserved
    system 00:08: ioport range 0xc6c-0xc6c has been reserved
    system 00:08: ioport range 0xc6f-0xc6f has been reserved
    system 00:08: ioport range 0xcd4-0xcd5 has been reserved
    system 00:08: ioport range 0xcd6-0xcd7 has been reserved
    system 00:08: ioport range 0xcd8-0xcdf has been reserved
    system 00:08: ioport range 0x8000-0x805f has been reserved
    system 00:08: ioport range 0x8210-0x821f has been reserved
    system 00:08: ioport range 0xf40-0xf47 has been reserved
    system 00:08: ioport range 0x280-0x293 has been reserved
    system 00:08: ioport range 0x87f-0x87f has been reserved
    system 00:09: iomem range 0xe0000-0xfffff could not be reserved
    system 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
    system 00:09: iomem range 0x0-0xfff could not be reserved
    PCI: Bridge: 0000:00:01.0
    IO window: 9000-9fff
    MEM window: 0xc0000000-0xc00fffff
    PREFETCH window: 0x00000000d0000000-0x00000000dfffffff
    PCI: Bridge: 0000:00:04.0
    IO window: disabled.
    MEM window: 0xc0100000-0xc01fffff
    PREFETCH window: disabled.
    PCI: Bus 6, cardbus bridge: 0000:05:06.0
    IO window: 0x0000a800-0x0000a8ff
    IO window: 0x0000ac00-0x0000acff
    PREFETCH window: 0x40000000-0x43ffffff
    MEM window: 0x44000000-0x47ffffff
    PCI: Bridge: 0000:00:14.4
    IO window: a000-afff
    MEM window: 0xc0200000-0xc02fffff
    PREFETCH window: 0x0000000040000000-0x0000000043ffffff
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    PCI: Enabling device 0000:05:06.0 (0000 -> 0003)
    ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 23 (level, low) -> IRQ 23
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    Unpacking initramfs... done
    Freeing initrd memory: 541k freed
    apm: BIOS not found.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:05.0: Boot video device
    PCI: Setting latency timer of device 0000:00:04.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:04.0:pcie00]
    vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 1536k, total 131072k
    vesafb: mode is 1024x768x8, linelength=1024, pages=169
    vesafb: protected mode interface info at c000:52fd
    vesafb: pmi: set display start = c00c536b, set palette = c00c53a5
    vesafb: pmi: ports = 9010 9016 9054 9038 903c 905c 9000 9004 90b0 90b2 90b4
    vesafb: scrolling: redraw
    vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /class/input/input1
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Freeing unused kernel memory: 268k freed
    No dock devices found.
    SCSI subsystem initialized
    libata version 3.00 loaded.
    ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:14.1 to 64
    scsi0 : pata_atiixp
    scsi1 : pata_atiixp
    ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8460 irq 14
    ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8468 irq 15
    Switched to high resolution mode on CPU 0
    ata2.00: ATAPI: PIONEER DVD-RW DVR-K17A, 1.50, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVR-K17A 1.50 PQ: 0 ANSI: 5
    sata_sil 0000:00:12.0: version 2.3
    PCI: Enabling device 0000:00:12.0 (0005 -> 0007)
    ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
    scsi2 : sata_sil
    scsi3 : sata_sil
    ata3: SATA max UDMA/100 mmio m512@0xc0507000 tf 0xc0507080 irq 22
    ata4: SATA max UDMA/100 mmio m512@0xc0507000 tf 0xc05070c0 irq 22
    ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata3.00: ATA-7: TOSHIBA MK8037GSX, DL230M, max UDMA/100
    ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata3.00: configured for UDMA/100
    ata4: SATA link down (SStatus 0 SControl 300)
    scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK8037GS DL23 PQ: 0 ANSI: 5
    Driver 'sd' needs updating - please use bus_type methods
    sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 2:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
    sd 2:0:0:0: [sda] Write Protect is off
    sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:<4>Driver 'sr' needs updating - please use bus_type methods
    sda1 sda2 < sda5 > sda3
    sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    sd 2:0:0:0: [sda] Attached SCSI disk
    EXT3-fs: INFO: recovery required on readonly filesystem.
    EXT3-fs: write access will be enabled during recovery.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: recovery complete.
    EXT3-fs: mounted filesystem with ordered data mode.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month
    ACPI: AC Adapter [ADP0] (off-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input2
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input3
    ACPI: Power Button (CM) [PWRB]
    input: Lid Switch as /class/input/input4
    ACPI: Lid Switch [LID]
    ACPI: Transitioning device [FAN0] to D3
    ACPI: PNP0C0B:00 is registered as cooling_device0
    ACPI: Fan [FAN0] (off)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: ACPI0007:00 is registered as cooling_device1
    ACPI: Processor [CPU0] (supports 8 throttling states)
    ACPI: LNXTHERM:01 is registered as thermal_zone0
    ACPI: Thermal Zone [TZ00] (59 C)
    ACPI: LNXTHERM:02 is registered as thermal_zone1
    ACPI: Transitioning device [FAN0] to D0
    ACPI: Unable to turn cooling device [f78183d8] 'on'
    ACPI: Thermal Zone [TZ01] (56 C)
    Marking TSC unstable due to: TSC halts in idle.
    sr 1:0:0:0: Attached scsi generic sg0 type 5
    sd 2:0:0:0: Attached scsi generic sg1 type 0
    ACPI: \_SB_.PCI0.IDE_.SECD.S_D0: found ejectable bay
    ACPI: \_SB_.PCI0.IDE_.SECD.S_D0: Adding notify handler
    ACPI: Error installing bay notify handler
    ACPI: Bay [\_SB_.PCI0.IDE_.SECD.S_D0] Added
    ACPI: \_SB_.PCI0.IDE_.SECD.S_D1: found ejectable bay
    ACPI: \_SB_.PCI0.IDE_.SECD.S_D1: Adding notify handler
    ACPI: Error installing bay notify handler
    ACPI: Bay [\_SB_.PCI0.IDE_.SECD.S_D1] Added
    Linux agpgart interface v0.103
    ACPI: device:1f is registered as cooling_device2
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    input: Video Bus as /class/input/input5
    ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 19
    ohci_hcd 0000:00:13.0: OHCI Host Controller
    ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:13.0: irq 19, io mem 0xc0504000
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    8139too Fast Ethernet driver 0.9.28
    input: PC Speaker as /class/input/input6
    ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:13.2: EHCI Host Controller
    ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2
    ehci_hcd 0000:00:13.2: irq 19, io mem 0xc0506000
    ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 8 ports detected
    ACPI: PCI Interrupt 0000:05:07.0[A] -> GSI 20 (level, low) -> IRQ 20
    ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 19
    ohci_hcd 0000:00:13.1: OHCI Host Controller
    eth0: RealTek RTL8139 at 0xf8b24800, 00:a0:d1:6d:dc:08, IRQ 20
    eth0: Identified 8139 chip type 'RTL-8100B/8139D'
    ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
    ohci_hcd 0000:00:13.1: irq 19, io mem 0xc0505000
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 4 ports detected
    fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    Symbol init_mm is marked as UNUSED, however this module is using it.
    This symbol will go away in the future.
    Please evalute if this is the right api to use, and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion.
    [fglrx] Maximum main memory to use for locked dma buffers: 802 MBytes.
    [fglrx] ASYNCIO init succeed!
    [fglrx] PAT is enabled successfully!
    [fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0
    8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    Yenta: CardBus bridge found at 0000:05:06.0 [1179:ff10]
    Yenta: Using CSCINT to route CSC interrupts to PCI
    Yenta: Routing CardBus interrupts to PCI
    Yenta TI: socket 0000:05:06.0, mfunc 0x01111002, devctl 0x44
    piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
    Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
    synaptics: Toshiba Satellite A100 detected, limiting rate to 40pps.
    input: SynPS/2 Synaptics TouchPad as /class/input/input7
    Yenta: ISA IRQ mask 0x0ef8, PCI irq 23
    Socket status: 30000006
    pcmcia: parent PCI bridge I/O window: 0xa000 - 0xafff
    cs: IO port probe 0xa000-0xafff: clean.
    pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xc02fffff
    pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x43ffffff
    ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:02:00.0 to 64
    ath5k_pci 0000:02:00.0: registered as 'phy0'
    cs: IO port probe 0x100-0x3af: clean.
    cs: IO port probe 0x3e0-0x4ff: clean.
    cs: IO port probe 0x820-0x8ff: clean.
    cs: IO port probe 0xc00-0xcf7: clean.
    cs: IO port probe 0xa00-0xaff: clean.
    ath5k phy0: failed to resume the MAC Chip
    ACPI: PCI interrupt for device 0000:02:00.0 disabled
    ath5k_pci: probe of 0000:02:00.0 failed with error -5
    ACPI: PCI Interrupt 0000:05:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
    ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
    hda_codec: Unknown model for ALC660VD/ALC861VD, trying auto-probe from BIOS...
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[c0200000-c02007ff] Max Packet=[2048] IR/IT contexts=[4/8]
    ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    wlan: trunk
    ath_pci: trunk
    PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
    ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:02:00.0 to 64
    MadWifi: unable to attach hardware: 'Hardware didn't respond as expected' (HAL status 3)
    ACPI: PCI interrupt for device 0000:02:00.0 disabled
    EXT3 FS on sda1, internal journal
    NTFS driver 2.1.29 [Flags: R/W MODULE].
    NTFS volume version 3.1.
    NTFS-fs error (device sda5): load_system_files(): Volume is dirty. Mounting read-only. Run chkdsk and mount in Windows.
    Adding 1004052k swap on /dev/sda3. Priority:-1 extents:1 across:1004052k
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[00080da0d16ddc08]
    warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
    hda-intel: Invalid position buffer, using LPIB read method instead.
    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    Last edited by JesseC (2008-04-25 17:25:52)

    tomk wrote:
    Thanks, I'll add it to my collection.
    I expect you blacklisted ath5k, right? Better the devil you know and all that, but I would give ath5k a try sometime. It's in mainline, and will eventually replace madwifi altogether.
    Yes I did, I eventually will have to go to ath5k but currently madwifi works without a problem so I see no real reason to move over at the moment. In other words, I'll let someone else be the beta tester on that project

  • / usage questions...

    Hello.
    I have 2 questions:
    1. I have noticed that my / partition's used space increased by ~10M from the last time I've checked it, from 111M to 121M. What could be the cause of that? (see the info below...)
    2. The output of df and du is not what I am expecting it to be. I.e. there are differences between the disk usage reported by these 2 commands on the / partition. What could be the cause of this? (see the info below...)
    Any reply or any RTFM re-dirrectioning is appreciated.
    TIA
    Info:
    [root@guns /]# df -h
    Filesystem Size Used Avail Use% Mounted on
    /dev/ide/host0/bus0/target0/lun0/part5
    189M 121M 68M 65% /
    none 235M 0 235M 0% /dev/shm
    tmpfs 235M 4.0K 235M 1% /tmp
    /dev/ide/host0/bus0/target0/lun0/part2
    31M 5.2M 24M 18% /boot
    /dev/ide/host0/bus0/target0/lun0/part6
    2.4G 713M 1.7G 30% /usr
    /dev/ide/host0/bus0/target0/lun0/part7
    1.9G 374M 1.5G 20% /var
    /dev/ide/host0/bus0/target0/lun0/part8
    57G 35G 23G 62% /home
    /dev/ide/host0/bus0/target0/lun0/part9
    957M 486M 472M 51% /opt
    [root@guns /]# ls
    bin boot dev etc home lib mnt opt proc root sbin sys tmp udev usr var
    [root@guns /]# du -sh bin/ dev/ etc/ lib/ mnt/ proc/ root/ sbin/ sys/ tmp/ udev/
    2.8M bin/
    0 dev/
    5.5M etc/
    64M lib/
    0 mnt/
    481M proc/
    12M root/
    5.2M sbin/
    du: cannot access `sys/bus/pci/drivers/Intel(R) 830M/845G/852GM/855GM/865G Framebuffer Driver': No such file or directory
    0 sys/
    4.0K tmp/
    0 udev/
    Here's my dmesg output in case it helps...
    Linux version 2.6.11.7-ARCH (root@earth) (gcc version 3.4.3) #1 SMP Sat Apr 9 13:37:54 PDT 2005
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000001dffc000 (usable)
    BIOS-e820: 000000001dffc000 - 000000001dfff000 (ACPI data)
    BIOS-e820: 000000001dfff000 - 000000001e000000 (ACPI NVS)
    BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    0MB HIGHMEM available.
    479MB LOWMEM available.
    On node 0 totalpages: 122876
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 118780 pages, LIFO batch:16
    HighMem zone: 0 pages, LIFO batch:1
    DMI 2.3 present.
    ACPI: RSDP (v000 ASUS ) @ 0x000f6b10
    ACPI: RSDT (v001 ASUS A7VI-VM 0x30303031 MSFT 0x31313031) @ 0x1dffc000
    ACPI: FADT (v001 ASUS A7VI-VM 0x30303031 MSFT 0x31313031) @ 0x1dffc080
    ACPI: BOOT (v001 ASUS A7VI-VM 0x30303031 MSFT 0x31313031) @ 0x1dffc040
    ACPI: DSDT (v001 ASUS A7VI-VM 0x00001000 MSFT 0x0100000b) @ 0x00000000
    ACPI: PM-Timer IO Port: 0xe408
    Allocating PCI resources starting at 1e000000 (gap: 1e000000:e1ff0000)
    Built 1 zonelists
    Kernel command line: root=/dev/hda5 vga=773 ro
    Local APIC disabled by BIOS -- you can enable it with "lapic"
    mapped APIC to ffffd000 (013e3000)
    Initializing CPU#0
    PID hash table entries: 2048 (order: 11, 32768 bytes)
    Detected 807.525 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Memory: 480548k/491504k available (4086k kernel code, 10360k reserved, 1236k data, 288k init, 0k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay loop... 1597.44 BogoMIPS (lpj=798720)
    Security Framework v1.0.0 initialized
    Capability LSM initialized
    Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
    CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
    CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 64K (64 bytes/line)
    CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 00000000 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Enabling fast FPU save and restore... done.
    Checking 'hlt' instruction... OK.
    ACPI: setting ELCR to 0200 (from 0e00)
    CPU0: AMD Duron(tm) Processor stepping 01
    per-CPU timeslice cutoff: 182.83 usecs.
    task migration cache decay timeout: 1 msecs.
    SMP motherboard not detected.
    Local APIC not detected. Using dummy APIC emulation.
    Brought up 1 CPUs
    CPU0 attaching sched-domain:
    domain 0: span 1
    groups: 1
    domain 1: span 1
    groups: 1
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xf10c0, last bus=1
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20050228
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Via IRQ fixup
    ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCI1._PRT]
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 12 devices
    PnPBIOS: Disabled by ACPI PNP
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    ** PCI interrupts are no longer routed automatically. If this
    ** causes a device to stop working, it is probably because the
    ** driver failed to call pci_enable_device(). As a temporary
    ** workaround, the "pci=routeirq" argument restores the old
    ** behavior. If this argument makes the device work again,
    ** please email the output of "lspci" to [email protected]
    ** so I can fix the driver.
    pnp: 00:02: ioport range 0xe400-0xe47f could not be reserved
    pnp: 00:02: ioport range 0xe800-0xe80f has been reserved
    pnp: 00:02: ioport range 0xe200-0xe27f has been reserved
    Simple Boot Flag at 0x3a set to 0x1
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    devfs: 2004-01-31 Richard Gooch ([email protected])
    devfs: boot_options: 0x1
    Installing knfsd (copyright (C) 1996 [email protected]).
    SGI XFS with ACLs, security attributes, no debug enabled
    SGI XFS Quota Management subsystem
    Initializing Cryptographic API
    Applying VIA southbridge workaround.
    PCI: Disabling Via external APIC routing
    vesafb: framebuffer at 0xf0000000, mapped to 0xde880000, using 1536k, total 32768k
    vesafb: mode is 1024x768x8, linelength=1024, pages=41
    vesafb: protected mode interface info at c000:7f88
    vesafb: scrolling: redraw
    vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    ACPI: Power Button (FF) [PWRF]
    ACPI: CPU0 (power states: C1[C1] C2[C2])
    ACPI: Processor [CPU0] (supports 16 throttling states)
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Linux agpgart interface v0.100 (c) Dave Jones
    agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
    agpgart: Maximum main memory to use for agp memory: 409M
    agpgart: AGP aperture is 64M @ 0xf8000000
    [drm] Initialized drm 1.0.0 20040925
    intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G chipsets
    intelfb: Version 0.9.2
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
    loop: loaded (max 8 devices)
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    spurious 8259A interrupt: IRQ7.
    VP_IDE: IDE controller at PCI slot 0000:00:07.1
    VP_IDE: chipset revision 6
    VP_IDE: not 100% native mode: will probe irqs later
    VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
    Probing IDE interface ide0...
    hda: Maxtor 6Y080L0, ATA DISK drive
    hdb: HL-DT-ST GCE-8481B, ATAPI CD/DVD-ROM drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: HL-DT-STDVD-ROM GDR8163B, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    Probing IDE interface ide2...
    Probing IDE interface ide3...
    Probing IDE interface ide4...
    Probing IDE interface ide5...
    hda: max request size: 128KiB
    hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(33)
    hda: cache flushes supported
    /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 >
    hdb: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    hdc: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
    libata version 1.10 loaded.
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard on isa0060/serio0
    psmouse.c: Failed to reset mouse on isa0060/serio1
    input: PS/2 Generic Mouse on isa0060/serio1
    psmouse.c: Failed to enable mouse on isa0060/serio1
    md: linear personality registered as nr 1
    md: raid0 personality registered as nr 2
    md: raid1 personality registered as nr 3
    md: raid10 personality registered as nr 9
    md: raid5 personality registered as nr 4
    raid5: measuring checksumming speed
    8regs : 1080.000 MB/sec
    8regs_prefetch: 1020.000 MB/sec
    32regs : 812.000 MB/sec
    32regs_prefetch: 764.000 MB/sec
    pII_mmx : 2168.000 MB/sec
    p5_mmx : 2904.000 MB/sec
    raid5: using function: p5_mmx (2904.000 MB/sec)
    raid6: int32x1 332 MB/s
    raid6: int32x2 410 MB/s
    raid6: int32x4 265 MB/s
    raid6: int32x8 253 MB/s
    raid6: mmxx1 675 MB/s
    raid6: mmxx2 1136 MB/s
    raid6: sse1x1 644 MB/s
    raid6: sse1x2 1058 MB/s
    raid6: using algorithm sse1x2 (1058 MB/s)
    md: raid6 personality registered as nr 8
    md: multipath personality registered as nr 7
    md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
    device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected]
    NET: Registered protocol family 2
    IP: routing cache hash table of 2048 buckets, 32Kbytes
    TCP established hash table entries: 16384 (order: 6, 262144 bytes)
    TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
    TCP: Hash tables configured (established 16384 bind 16384)
    NET: Registered protocol family 1
    NET: Registered protocol family 10
    IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    ACPI wakeup devices:
    PCI0 PCI1 UAR1 UAR2 USB0 USB1
    ACPI: (supports S0 S1 S4 S5)
    devfs_mk_dev: could not append to parent for md/0
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    ReiserFS: hda5: found reiserfs format "3.6" with standard journal
    ReiserFS: hda5: using ordered data mode
    ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max t
    rans age 30
    ReiserFS: hda5: checking transaction log (hda5)
    ReiserFS: hda5: Using r5 hash to sort names
    VFS: Mounted root (reiserfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 288k freed
    Adding 96380k swap on /dev/discs/disc0/part3. Priority:-1 extents:1
    Adding 96348k swap on /dev/discs/disc0/part10. Priority:-2 extents:1
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on hda2, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    ReiserFS: hda6: found reiserfs format "3.6" with standard journal
    ReiserFS: hda6: using ordered data mode
    ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max t
    rans age 30
    ReiserFS: hda6: checking transaction log (hda6)
    ReiserFS: hda6: Using r5 hash to sort names
    ReiserFS: hda7: found reiserfs format "3.6" with standard journal
    ReiserFS: hda7: using ordered data mode
    ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max t
    rans age 30
    ReiserFS: hda7: checking transaction log (hda7)
    ReiserFS: hda7: Using r5 hash to sort names
    ReiserFS: hda8: found reiserfs format "3.6" with standard journal
    ReiserFS: hda8: using ordered data mode
    ReiserFS: hda8: journal params: device hda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max t
    rans age 30
    ReiserFS: hda8: checking transaction log (hda8)
    ReiserFS: hda8: Using r5 hash to sort names
    ReiserFS: hda9: found reiserfs format "3.6" with standard journal
    ReiserFS: hda9: using ordered data mode
    ReiserFS: hda9: journal params: device hda9, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max t
    rans age 30
    ReiserFS: hda9: checking transaction log (hda9)
    ReiserFS: hda9: Using r5 hash to sort names
    Real Time Clock Driver v1.12
    8139too Fast Ethernet driver 0.9.27
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    ACPI: PCI interrupt 0000:00:0e.0[A] -> GSI 10 (level, low) -> IRQ 10
    eth0: RealTek RTL8139 at 0xded90000, 00:50:fc:cd:88:dd, IRQ 10
    eth0: Identified 8139 chip type 'RTL-8100B/8139D'
    Forcing 10Mbps half-duplex operation.
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
    PCI: setting IRQ 9 as level-triggered
    ACPI: PCI interrupt 0000:00:07.5[C] -> GSI 9 (level, low) -> IRQ 9
    PCI: Setting latency timer of device 0000:00:07.5 to 64
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    Initializing USB Mass Storage driver...
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    USB Universal Host Controller Interface driver v2.2
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
    ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 9 (level, low) -> IRQ 9
    uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    uhci_hcd 0000:00:07.2: irq 9, io base 0xd400
    uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 9 (level, low) -> IRQ 9
    uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
    uhci_hcd 0000:00:07.3: irq 9, io base 0xd000
    uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    usb 1-2: new low speed USB device using uhci_hcd and address 2
    usbcore: registered new driver hiddev
    usb 2-2: new full speed USB device using uhci_hcd and address 2
    scsi0 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:07.2-2
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    Disabled Privacy Extensions on device c05d68a0(lo)
    Vendor: USB MASS Model: STORAGE DEVICE Rev: 0.10
    Type: Direct-Access ANSI SCSI revision: 02
    Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
    usb-storage: device scan complete
    eth0: no IPv6 routers present

    The PC was indeed turned off between the two checks.
    However the first check was not performed right before the shutdown, but few hours before it.
    :idea:
    (...) varying from browser cache data increase to a cronjob like updatedb, or even you installing or downloading something.
    When I've read these words I have started to "scroll" back in my memory buffer and eventually I've remembered that the only thing I did as superuser was to download some Firefox extensions which (surprise or not...) summed up to ~12M.
    So we have the answer for this one too thanks to your hints
    PS: That's exactly the reason why I've made a small / partition - to keep a close eye on it's usage and to ring some allarms when needed.
    Again, thank you. 

  • [Kernel] USB and network trouble

    Hey all, i have some trouble getting my system fully running.
    I have a built in 3com network card, it uses the 3c59x module in the kernel (got it build into the kernel). I also have a usb cd writer. When i start writing my network fails after sometime. I came from vectorlinux to arch. In VL it worked without a prob. Here check my dmesg output. The most interesting is at the end.
    chitecture supported.
    Intel machine check reporting enabled on CPU#0.
    CPU: Intel Pentium III (Coppermine) stepping 06
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    ACPI: setting ELCR to 0200 (from 0808)
    checking if image is initramfs... it is
    Freeing initrd memory: 567k freed
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xfed9b, last bus=21
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20041105
    ACPI-0169: *** Error: No object was returned from [_SB_.LNKA._STA] (Node d3fdef00), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.LNKB._STA] (Node d3fdee00), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.LNKC._STA] (Node d3fded00), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.LNKD._STA] (Node d3fdec00), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.FDD_._STA] (Node c12f75a0), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.COM_._STA] (Node c12f7460), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.PRT_._STA] (Node c12f72e0), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.PRT1._STA] (Node c12f7200), AE_NOT_EXIST
    ACPI-0169: *** Error: No object was returned from [_SB_.PCI0.FNC0.PCC0._STA] (Node c12f7fe0), AE_NOT_EXIST
    ACPI: Interpreter enabled
    ACPI: Using PIC for interrupt routing
    ACPI-0169: *** Error: No object was returned from [_SB_.LNKE._PRS] (Node c12fc780), AE_NOT_EXIST
    ACPI: PCI Root Bridge [PCI0] (00:00)
    PCI: Probing PCI hardware (bus 00)
    ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
    ACPI: Power Resource [PIHD] (on)
    ACPI: Power Resource [PMHD] (off)
    ACPI: Power Resource [PDOC] (off)
    ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCI1._PRT]
    ACPI: Power Resource [PFAN] (off)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI-0169: *** Error: No object was returned from [_SB_.MEM_._CRS] (Node c12fc6a0), AE_NOT_EXIST
    pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
    PCI: setting IRQ 13 as level-triggered
    pnp: PnP ACPI: found 9 devices
    SCSI subsystem initialized
    Linux Kernel Card Services
    options: [pci] [cardbus] [pm]
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: Using ACPI for IRQ routing
    ** PCI interrupts are no longer routed automatically. If this
    ** causes a device to stop working, it is probably because the
    ** driver failed to call pci_enable_device(). As a temporary
    ** workaround, the "pci=routeirq" argument restores the old
    ** behavior. If this argument makes the device work again,
    ** please email the output of "lspci" to [email protected]
    ** so I can fix the driver.
    ACPI-0169: *** Error: No object was returned from [_SB_.MEM_._CRS] (Node c12fc6a0), AE_NOT_EXIST
    apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
    apm: overridden by ACPI.
    devfs: 2004-01-31 Richard Gooch ([email protected])
    devfs: boot_options: 0x1
    Initializing Cryptographic API
    Limiting direct PCI/PCI transfers.
    cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.4
    acpiphp_glue: can't get bus number, assuming 0
    Linux agpgart interface v0.100 (c) Dave Jones
    agpgart: Detected an Intel 440BX Chipset.
    agpgart: Maximum main memory to use for agp memory: 262M
    agpgart: AGP aperture is 256M @ 0xd0000000
    vesafb: framebuffer at 0xf0000000, mapped to 0xd4900000, using 6144k, total 8192k
    vesafb: mode is 1024x768x32, linelength=4096, pages=1
    vesafb: protected mode interface info at c000:8751
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    ACPI: AC Adapter [ADP1] (on-line)
    ACPI: Battery Slot [BAT1] (battery present)
    ACPI: Power Button (FF) [PWRF]
    ACPI: Lid Switch [LID]
    ACPI: Fan [FAN] (off)
    ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
    ACPI: Processor [CPU0] (supports C1 C2)
    ACPI: Thermal Zone [THRM] (66 C)
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered
    elevator: using anticipatory as default io scheduler
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
    loop: loaded (max 8 devices)
    ACPI: PCI interrupt 0000:00:0f.0[A]: no GSI - using IRQ 11
    3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
    0000:00:0f.0: 3Com PCI 3c905C Tornado at 0xfb00. Vers LK1.1.19
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    PIIX4: IDE controller at PCI slot 0000:00:05.1
    PIIX4: chipset revision 1
    PIIX4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfff0-0xfff7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xfff8-0xffff, BIOS settings: hdc:DMA, hdd:pio
    Probing IDE interface ide0...
    hda: TOSHIBA MK1516GAP, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: TOSHIBA DVD-ROM SD-C2402, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    Probing IDE interface ide2...
    ide2: Wait for ready failed before probe !
    Probing IDE interface ide3...
    ide3: Wait for ready failed before probe !
    Probing IDE interface ide4...
    ide4: Wait for ready failed before probe !
    Probing IDE interface ide5...
    ide5: Wait for ready failed before probe !
    hda: max request size: 128KiB
    hda: 23579136 sectors (12072 MB), CHS=23392/16/63, UDMA(33)
    hda: cache flushes not supported
    /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 >
    hdc: ATAPI 24X DVD-ROM drive, 128kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    PCI: Enabling device 0000:00:0b.0 (0000 -> 0002)
    ACPI: PCI interrupt 0000:00:0b.0[A]: no GSI
    Yenta: CardBus bridge found at 0000:00:0b.0 [1179:0001]
    Yenta: ISA IRQ mask 0x0cb8, PCI irq 0
    Socket status: 30000007
    PCI: Enabling device 0000:00:0b.1 (0000 -> 0002)
    ACPI: PCI interrupt 0000:00:0b.1[b]: no GSI
    Yenta: CardBus bridge found at 0000:00:0b.1 [1179:0001]
    Yenta: ISA IRQ mask 0x0cb8, PCI irq 0
    Socket status: 30000007
    ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    USB Universal Host Controller Interface driver v2.2
    ACPI: PCI interrupt 0000:00:05.2[D]: no GSI - using IRQ 11
    uhci_hcd 0000:00:05.2: Intel Corp. 82371AB/EB/MB PIIX4 USB
    uhci_hcd 0000:00:05.2: irq 11, io base 0xff80
    uhci_hcd 0000:00:05.2: new USB bus registered, assigned bus number 1
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    sl811: driver sl811-hcd, 06 Dec 2004
    usb 1-2: new full speed USB device using uhci_hcd and address 2
    usbaudio: device 2 audiocontrol interface 0 has 1 input and 0 output AudioStreaming interfaces
    usbaudio: valid input sample rate 8000
    usbaudio: valid input sample rate 48000
    usbaudio: valid input sample rate 44100
    usbaudio: valid input sample rate 22050
    usbaudio: valid input sample rate 11025
    usbaudio: device 2 interface 1 altsetting 1: format 0x00000010 sratelo 8000 sratehi 48000 attributes 0x01
    usbaudio: valid input sample rate 8000
    usbaudio: valid input sample rate 48000
    usbaudio: valid input sample rate 44100
    usbaudio: valid input sample rate 22050
    usbaudio: valid input sample rate 11025
    usbaudio: device 2 interface 1 altsetting 2: format 0x80000010 sratelo 8000 sratehi 48000 attributes 0x01
    usbaudio: registered dsp 14,3
    usbaudio: constructing mixer for Terminal 2 type 0x0101
    usbaudio: registered mixer 14,0
    usb_audio_parsecontrol: usb_audio_state at d3cb6560
    usbcore: registered new driver audio
    drivers/usb/class/audio.c: v1.0.0:USB Audio Class driver
    Initializing USB Mass Storage driver...
    usbcore: registered new driver usb-storage
    USB Mass Storage support registered.
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.0:USB HID core driver
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard on isa0060/serio0
    input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
    Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC).
    ACPI: PCI interrupt 0000:00:0c.0[A]: no GSI - using IRQ 11
    es1968: clocking to 48000
    unable to register OSS PCM device 0:0
    unable to register OSS mixer device 0:0
    ALSA device list:
    #0: ESS ES1978 (Maestro 2E) at 0xfc00, irq 11
    NET: Registered protocol family 2
    IP: routing cache hash table of 2048 buckets, 16Kbytes
    TCP: Hash tables configured (established 32768 bind 65536)
    NET: Registered protocol family 1
    NET: Registered protocol family 10
    IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    ACPI wakeup devices:
    USB VIY0 VIY1 MODM LAN LAN2 LID
    ACPI: (supports S0 S1 S3 S4 S4bios S5)
    ReiserFS: hda1: found reiserfs format "3.6" with standard journal
    ReiserFS: hda1: using ordered data mode
    ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda1: checking transaction log (hda1)
    ReiserFS: hda1: Using r5 hash to sort names
    VFS: Mounted root (reiserfs filesystem) readonly.
    Mounted devfs on /dev
    Freeing unused kernel memory: 192k freed
    Adding 40120k swap on /dev/discs/disc0/part5. Priority:-1 extents:1
    Adding 128480k swap on /dev/discs/disc0/part7. Priority:-2 extents:1
    Adding 128480k swap on /dev/discs/disc0/part8. Priority:-3 extents:1
    Real Time Clock Driver v1.12
    drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
    usbcore: registered new driver usbserial_generic
    usbcore: registered new driver usbserial
    drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
    Disabled Privacy Extensions on device c04cd0e0(lo)
    eth0: no IPv6 routers present
    ISO 9660 Extensions: Microsoft Joliet Level 3
    ISOFS: changing to secondary root
    usb 1-1: new full speed USB device using uhci_hcd and address 3
    scsi0 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 3
    usb-storage: waiting for device to settle before scanning
    Vendor: LITE-ON Model: LTR-48246K Rev: SKS7
    Type: CD-ROM ANSI SCSI revision: 00
    sr0: scsi3-mmc drive: 207x/48x writer cd/rw xa/form2 cdda tray
    Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
    Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
    usb-storage: device scan complete
    cdrom: This disc doesn't have any tracks I recognize!
    cdrom: This disc doesn't have any tracks I recognize!
    scsi: unknown opcode 0x01
    ISO 9660 Extensions: Microsoft Joliet Level 3
    ISOFS: changing to secondary root
    NETDEV WATCHDOG: eth0: transmit timed out
    eth0: transmit timed out, tx_status 00 status e601.
    diagnostics: net 0cf6 media 8880 dma 0000003a fifo 8000
    eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
    Flags; bus-master 1, dirty 1328(0) current 1328(0)
    Transmit list 00000000 vs. d3c97200.
    0: @d3c97200 length 8000049c status 0c01049c
    1: @d3c972a0 length 8000049c status 0c01049c
    2: @d3c97340 length 8000004d status 0c01004d
    3: @d3c973e0 length 8000004d status 0c01004d
    4: @d3c97480 length 80000049 status 0c010049
    5: @d3c97520 length 80000049 status 0c010049
    6: @d3c975c0 length 8000002a status 0001002a
    7: @d3c97660 length 80000049 status 0c010049
    8: @d3c97700 length 8000002a status 0001002a
    9: @d3c977a0 length 8000002a status 0001002a
    10: @d3c97840 length 8000004d status 0c01004d
    11: @d3c978e0 length 8000002a status 0001002a
    12: @d3c97980 length 8000002a status 0001002a
    13: @d3c97a20 length 8000002a status 0001002a
    14: @d3c97ac0 length 8000002a status 8001002a
    15: @d3c97b60 length 8000002a status 8001002a
    eth0: Resetting the Tx ring pointer.
    NETDEV WATCHDOG: eth0: transmit timed out
    eth0: transmit timed out, tx_status 00 status e601.
    diagnostics: net 0cf6 media 8880 dma 0000003a fifo 0000
    eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
    Flags; bus-master 1, dirty 1344(0) current 1344(0)
    Transmit list 00000000 vs. d3c97200.
    0: @d3c97200 length 8000002a status 0001002a
    1: @d3c972a0 length 8000002a status 0001002a
    2: @d3c97340 length 8000002a status 0001002a
    3: @d3c973e0 length 8000002a status 0001002a
    4: @d3c97480 length 80000036 status 00010036
    5: @d3c97520 length 80000036 status 00010036
    6: @d3c975c0 length 80000036 status 00010036
    7: @d3c97660 length 80000036 status 00010036
    8: @d3c97700 length 80000036 status 00010036
    9: @d3c977a0 length 80000036 status 00010036
    10: @d3c97840 length 80000036 status 00010036
    11: @d3c978e0 length 80000047 status 0c010047
    12: @d3c97980 length 80000082 status 00010082
    13: @d3c97a20 length 8000004e status 0001004e
    14: @d3c97ac0 length 8000004e status 8001004e
    15: @d3c97b60 length 8000004e status 8001004e
    eth0: Resetting the Tx ring pointer.
    NETDEV WATCHDOG: eth0: transmit timed out
    eth0: transmit timed out, tx_status 00 status e601.
    diagnostics: net 0cf6 media 8880 dma 0000003a fifo 0000
    eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
    Flags; bus-master 1, dirty 1360(0) current 1360(0)
    Transmit list 00000000 vs. d3c97200.
    0: @d3c97200 length 80000080 status 00010080
    1: @d3c972a0 length 8000004a status 0001004a
    2: @d3c97340 length 80000055 status 0c010055
    3: @d3c973e0 length 8000004a status 0001004a
    4: @d3c97480 length 8000002a status 0001002a
    5: @d3c97520 length 8000002a status 0001002a
    6: @d3c975c0 length 8000002a status 0001002a
    7: @d3c97660 length 80000055 status 0c010055
    8: @d3c97700 length 8000002a status 0001002a
    9: @d3c977a0 length 8000006c status 0001006c
    10: @d3c97840 length 80000036 status 00010036
    11: @d3c978e0 length 80000036 status 00010036
    12: @d3c97980 length 80000049 status 0c010049
    13: @d3c97a20 length 80000051 status 0c010051
    14: @d3c97ac0 length 80000049 status 8c010049
    15: @d3c97b60 length 80000051 status 8c010051
    eth0: Resetting the Tx ring pointer.
    NETDEV WATCHDOG: eth0: transmit timed out
    eth0: transmit timed out, tx_status 00 status e601.
    diagnostics: net 0cf6 media 8880 dma 0000003a fifo 0000
    eth0: Interrupt posted but not delivered -- IRQ blocked by another device?
    Flags; bus-master 1, dirty 1376(0) current 1376(0)
    Transmit list 00000000 vs. d3c97200.
    0: @d3c97200 length 80000049 status 0c010049
    1: @d3c972a0 length 80000051 status 0c010051
    2: @d3c97340 length 800000ae status 000100ae
    3: @d3c973e0 length 800000ae status 000100ae
    4: @d3c97480 length 80000042 status 00010042
    5: @d3c97520 length 8000006b status 0001006b
    6: @d3c975c0 length 8000006b status 0001006b
    7: @d3c97660 length 80000080 status 00010080
    8: @d3c97700 length 8000004e status 0001004e
    9: @d3c977a0 length 80000080 status 00010080
    10: @d3c97840 length 8000004e status 0001004e
    11: @d3c978e0 length 80000080 status 00010080
    12: @d3c97980 length 80000080 status 00010080
    13: @d3c97a20 length 8000006b status 0001006b
    14: @d3c97ac0 length 80000051 status 8c010051
    15: @d3c97b60 length 8000004a status 8001004a
    eth0: Resetting the Tx ring pointer.
    eth0: no IPv6 routers present
    When my network is down, the onlything to restore is is rebooting my computer. Restarting the network daemon does not work. Currently i don't have hotplug running, but with hotplug i encounter the same problem.
    I hope anybody can help me.
    Greetinx Atze

    It looks like the problem is with ACPI or you have a hardware IRQ conflict..
    check for a bios update for your Motherboard and check the bios settings.
    It might also help if you moved network card to another pci-slot.

  • D-Link DFE-530TX not working.

    I have got this problem since i bought this Ethernet adapter. I mainly boght it, because I wanted to run OpenBSD. But it just doesn't work. Theres i light when I plug my ethernet cable to it, but that it just about it.
    I have tried to disable my onboard ethernet controller (VIA Technologies Inc|VT3119 Gigabit Ethernet Controller), and add "pci=routeirq". But that hasn't worked at all.
    From 'lspci -vv
    01:07.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 86)
    Subsystem: D-Link System Inc: Unknown device 1403
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 32 (750ns min, 2000ns max), cache line size 08
    Interrupt: pin A routed to IRQ 19
    Region 0: I/O ports at a000 [size=256]
    Region 1: Memory at eb013000 (32-bit, non-prefetchable) [size=256]
    Expansion ROM at <unassigned> [disabled] [size=64K]
    Capabilities: <available only to root>
    And from 'dmesg'
    Linux version 2.6.12-ARCH (root@earth) (gcc version 3.4.3) #1 SMP Fri Jul 1 11:55:48 PDT 2005
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
    BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
    BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
    BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
    127MB HIGHMEM available.
    896MB LOWMEM available.
    On node 0 totalpages: 262128
    DMA zone: 4096 pages, LIFO batch:1
    Normal zone: 225280 pages, LIFO batch:31
    HighMem zone: 32752 pages, LIFO batch:15
    DMI 2.2 present.
    ACPI: RSDP (v000 Nvidia ) @ 0x000f7a20
    ACPI: RSDT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
    ACPI: FADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
    ACPI: MADT (v001 Nvidia AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff8300
    ACPI: DSDT (v001 NVIDIA AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
    ACPI: PM-Timer IO Port: 0x4008
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    Processor #0 6:10 APIC version 16
    ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: BIOS IRQ0 pin2 override ignored.
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
    ACPI: IRQ9 used by override.
    ACPI: IRQ14 used by override.
    ACPI: IRQ15 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000)
    Built 1 zonelists
    Kernel command line: root=/dev/discs/disc0/part1 devfs=nomount pci=routeirq vga=792 ro
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 65536 bytes)
    Detected 2166.913 MHz processor.
    Using pmtmr for high-res timesource
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 1032576k/1048512k available (4079k kernel code, 15160k reserved, 1270k data, 288k init, 131008k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay loop... 4292.60 BogoMIPS (lpj=2146304)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
    CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000020 00000000 00000000 00000000
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Checking 'hlt' instruction... OK.
    CPU0: AMD Athlon(tm) XP 3000+ stepping 00
    Total of 1 processors activated (4292.60 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 pin1=0 pin2=-1
    Brought up 1 CPUs
    CPU0 attaching sched-domain:
    domain 0: span 1
    groups: 1
    domain 1: span 1
    groups: 1
    NET: Registered protocol family 16
    PCI: PCI BIOS revision 2.10 entry at 0xfbb70, last bus=2
    PCI: Using configuration type 1
    mtrr: v2.0 (20020519)
    ACPI: Subsystem revision 20050408
    ACPI: Interpreter enabled
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    Boot video device is 0000:02:00.0
    ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [_SB_.PCI0.HUB0._PRT]
    ACPI: Power Resource [ISAV] (on)
    ACPI: PCI Interrupt Routing Table [_SB_.PCI0.AGPB._PRT]
    ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LSMB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
    ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
    ACPI: PCI Interrupt Link [APC3] (IRQs *1, disabled.
    ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
    ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
    ACPI: PCI Interrupt Link [APCF] (IRQs 20 21) *0, disabled.
    ACPI: PCI Interrupt Link [APCG] (IRQs 20 21) *0, disabled.
    ACPI: PCI Interrupt Link [APCH] (IRQs 20 21) *0, disabled.
    ACPI: PCI Interrupt Link [APCI] (IRQs 20 21) *0, disabled.
    ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21) *0, disabled.
    ACPI: PCI Interrupt Link [APCK] (IRQs 20 21) *0, disabled.
    ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
    ACPI: PCI Interrupt Link [APCL] (IRQs 20 21) *0, disabled.
    ACPI: PCI Interrupt Link [APCM] (IRQs 20 21) *0, disabled.
    ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21) *0, disabled.
    ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21) *0, disabled.
    ACPI: PCI Interrupt Link [APSI] (IRQs 22) *0, disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    pnp: PnP ACPI: found 13 devices
    PnPBIOS: Disabled by ACPI PNP
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
    ACPI: PCI Interrupt Link [APCS] enabled at IRQ 23
    ACPI: PCI Interrupt 0000:00:01.1[A] -> Link [APCS] -> GSI 23 (level, low) -> IRQ 23
    ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 21
    ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
    ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 20
    ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
    ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 21
    ACPI: PCI Interrupt Link [APSI] enabled at IRQ 22
    ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APSI] -> GSI 22 (level, high) -> IRQ 22
    ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
    ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
    ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
    ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
    ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low) -> IRQ 17
    ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
    ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
    ACPI: PCI Interrupt 0000:01:0a.1[B] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
    ACPI: PCI Interrupt 0000:01:0a.2[C] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
    ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
    ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
    pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
    pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
    pnp: 00:00: ioport range 0x4400-0x447f has been reserved
    pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
    pnp: 00:00: ioport range 0x4200-0x427f has been reserved
    pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
    pnp: 00:01: ioport range 0x5000-0x503f has been reserved
    pnp: 00:01: ioport range 0x5100-0x513f has been reserved
    apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    apm: overridden by ACPI.
    highmem bounce pool size: 64 pages
    inotify device minor=63
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    devfs: 2004-01-31 Richard Gooch ([email protected])
    devfs: boot_options: 0x0
    Installing knfsd (copyright (C) 1996 [email protected]" target="_new">[email protected]).
    JFS: nTxBlock = 8070, nTxLock = 64560
    SGI XFS with ACLs, security attributes, no debug enabled
    SGI XFS Quota Management subsystem
    Initializing Cryptographic API
    vesafb: framebuffer at 0xd0000000, mapped to 0xf8d00000, using 6144k, total 262144k
    vesafb: mode is 1024x768x32, linelength=4096, pages=1
    vesafb: protected mode interface info at c000:d4d0
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    ACPI: Power Button (FF) [PWRF]
    ACPI: Power Button (CM) [PWRB]
    ACPI: Fan [FAN] (on)
    ACPI: Thermal Zone [THRM] (45 C)
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Linux agpgart interface v0.101 (c) Dave Jones
    agpgart: Detected NVIDIA nForce2 chipset
    agpgart: AGP aperture is 128M @ 0xe0000000
    intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G chipsets
    intelfb: Version 0.9.2
    PNP: PS/2 Controller [PNP0303S2K,PNP0f13S2M] at 0x60,0x64 irq 1,12
    serio: i8042 AUX port at 0x60,0x64 irq 12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered
    Floppy drive(s): fd0 is 1.44M
    FDC 0 is a post-1991 82077
    RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
    loop: loaded (max 8 devices)
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    NFORCE2-U400R: IDE controller at PCI slot 0000:00:09.0
    NFORCE2-U400R: chipset revision 163
    NFORCE2-U400R: not 100% native mode: will probe irqs later
    NFORCE2-U400R: BIOS didn't set cable bits correctly. Enabling workaround.
    NFORCE2-U400R: BIOS didn't set cable bits correctly. Enabling workaround.
    NFORCE2-U400R: 0000:00:09.0 (rev a3) UDMA133 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hdaMA, hdbMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdcMA, hddMA
    Probing IDE interface ide0...
    hda: SAMSUNG SP1203N, ATA DISK drive
    hdb: Maxtor 6Y080P0, ATA DISK drive
    ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Probing IDE interface ide1...
    hdc: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
    hdd: DVD-ROM BDV316E, ATAPI CD/DVD-ROM drive
    ide1 at 0x170-0x177,0x376 on irq 15
    Probing IDE interface ide2...
    Probing IDE interface ide3...
    Probing IDE interface ide4...
    Probing IDE interface ide5...
    hda: max request size: 1024KiB
    hda: 234493056 sectors (120060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
    hda: cache flushes supported
    /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
    hdb: max request size: 128KiB
    hdb: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(133)
    hdb: cache flushes supported
    /dev/ide/host0/bus0/target1/lun0: p1 p2
    hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Uniform CD-ROM driver Revision: 3.20
    hdd: ATAPI 40X DVD-ROM drive, 512kB Cache
    libata version 1.11 loaded.
    sata_nv version 0.6
    ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [APSI] -> GSI 22 (level, high) -> IRQ 22
    PCI: Setting latency timer of device 0000:00:0b.0 to 64
    ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 22
    ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 22
    ata1: no device found (phy stat 00000000)
    scsi0 : sata_nv
    ata2: no device found (phy stat 00000000)
    scsi1 : sata_nv
    mice: PS/2 mouse device common for all mice
    md: linear personality registered as nr 1
    md: raid0 personality registered as nr 2
    md: raid1 personality registered as nr 3
    md: raid10 personality registered as nr 9
    md: raid5 personality registered as nr 4
    raid5: automatically using best checksumming function: pIII_sse
    pIII_sse : 5844.000 MB/sec
    raid5: using function: pIII_sse (5844.000 MB/sec)
    raid6: int32x1 894 MB/s
    raid6: int32x2 1093 MB/s
    raid6: int32x4 710 MB/s
    raid6: int32x8 687 MB/s
    raid6: mmxx1 1808 MB/s
    raid6: mmxx2 3082 MB/s
    raid6: sse1x1 1730 MB/s
    raid6: sse1x2 2816 MB/s
    raid6: using algorithm sse1x2 (2816 MB/s)
    md: raid6 personality registered as nr 8
    md: multipath personality registered as nr 7
    md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
    device-mapper: 4.4.0-ioctl (2005-01-12) initialised: [email protected]
    NET: Registered protocol family 2
    IP: routing cache hash table of 4096 buckets, 64Kbytes
    TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
    TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
    TCP: Hash tables configured (established 262144 bind 65536)
    NET: Registered protocol family 1
    NET: Registered protocol family 10
    Disabled Privacy Extensions on device c05dbde0(lo)
    IPv6 over IPv4 tunneling driver
    NET: Registered protocol family 17
    ACPI wakeup devices:
    HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
    ACPI: (supports S0 S1 S4 S5)
    devfs_mk_dev: could not append to parent for md/0
    md: Autodetecting RAID arrays.
    md: autorun ...
    md: ... autorun DONE.
    ReiserFS: hda1: found reiserfs format "3.6" with standard journal
    input: AT Translated Set 2 keyboard on isa0060/serio0
    input: PS2++ Logitech MX Mouse on isa0060/serio1
    ReiserFS: hda1: using ordered data mode
    ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda1: checking transaction log (hda1)
    ReiserFS: hda1: Using r5 hash to sort names
    VFS: Mounted root (reiserfs filesystem) readonly.
    Freeing unused kernel memory: 288k freed
    cdrom: open failed.
    cdrom: open failed.
    Adding 128512k swap on /dev/discs/disc0/part2. Priority:-1 extents:1
    ReiserFS: hda3: found reiserfs format "3.6" with standard journal
    ReiserFS: hda3: using ordered data mode
    ReiserFS: hda3: journal params: device hda3, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    ReiserFS: hda3: checking transaction log (hda3)
    ReiserFS: hda3: Using r5 hash to sort names
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    VIA Networking Velocity Family Gigabit Ethernet Adapter Driver Ver. 1.13
    Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.
    Copyright (c) 2004 Red Hat Inc.
    ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
    PCI: Via IRQ fixup for 0000:01:0b.0, from 10 to 2
    eth0: VIA Networking Velocity Family Gigabit Ethernet Adapter
    eth0: Ethernet Address: 00:50:8D:62:92:E4
    Velocity is AUTO mode
    ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
    Audigy2 value:Special config.
    usbcore: registered new driver usblp
    drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    kqemu: module license 'unspecified' taints kernel.
    QEMU Accelerator Module version 1.1.0, Copyright (c) 2005 Fabrice Bellard
    This is a proprietary product. Read the LICENSE file for more information
    Redistribution of this module is prohibited without authorization
    KQEMU installed, max_instances=4 max_locked_mem=129156kB.
    ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
    NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7667 Fri Jun 17 07:01:04 PDT 2005
    i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
    i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5100
    via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
    ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
    PCI: Via IRQ fixup for 0000:01:07.0, from 5 to 3
    eth1: VIA Rhine III at 0x1a000, 00:11:95:d8:3b:a6, IRQ 19.
    eth1: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
    USB Universal Host Controller Interface driver v2.2
    ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC3] -> GSI 18 (level, low) -> IRQ 18
    PCI: Via IRQ fixup for 0000:01:0a.0, from 10 to 2
    uhci_hcd 0000:01:0a.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
    uhci_hcd 0000:01:0a.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:01:0a.0: irq 18, io base 0x0000a800
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:01:0a.1[B] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
    PCI: Via IRQ fixup for 0000:01:0a.1, from 5 to 3
    uhci_hcd 0000:01:0a.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
    uhci_hcd 0000:01:0a.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:01:0a.1: irq 19, io base 0x0000ac00
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 21 (level, high) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:02.2 to 64
    ehci_hcd 0000:00:02.2: nVidia Corporation MCP2A USB Controller
    ehci_hcd 0000:00:02.2: debug port 1
    ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
    ehci_hcd 0000:00:02.2: irq 21, io mem 0xec004000
    PCI: cache line size of 64 is not supported by device 0000:00:02.2
    ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 8 ports detected
    ACPI: PCI Interrupt 0000:01:0a.2[C] -> Link [APC1] -> GSI 16 (level, low) -> IRQ 16
    PCI: Via IRQ fixup for 0000:01:0a.2, from 3 to 0
    ehci_hcd 0000:01:0a.2: VIA Technologies, Inc. USB 2.0
    ehci_hcd 0000:01:0a.2: new USB bus registered, assigned bus number 4
    ehci_hcd 0000:01:0a.2: irq 16, io mem 0xeb011000
    ehci_hcd 0000:01:0a.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 4 ports detected
    ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
    ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 21
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    ohci_hcd 0000:00:02.0: nVidia Corporation MCP2A USB Controller
    ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 5
    ohci_hcd 0000:00:02.0: irq 21, io mem 0xec002000
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 4 ports detected
    ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:02.1 to 64
    ohci_hcd 0000:00:02.1: nVidia Corporation MCP2A USB Controller (#2)
    ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 6
    ohci_hcd 0000:00:02.1: irq 20, io mem 0xec003000
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 4 ports detected
    eth0: no IPv6 routers present
    agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
    agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
    agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
    agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
    agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
    Velocity is AUTO mode
    eth0: Link autonegation speed 100M bps full duplex
    eth0: no IPv6 routers present
    Could anyone tell me the problem? I am not strong in this kind of hardware.

    Thanks, Tim. However, I'm a consultant; it's not always my call. I just wanted to share what I had discovered, so someone else might benefit.
    Your tip would be best submitted at Mac OSX Hints as the info would remain publicly available. Where as this thread will be archived in a few months.
    I also do some mac consultancy and only recommend using tried and tested products that work out of the box without the need for installing extra drivers. Realtek chipsets have worked for the longest time and are found on the the cheapest of generic NICS.

  • Downloaded VM Template (EL5U3/DB 11.1.0.7/Agent 10.2.0.5/PVM) blocking

    Hi:
    I've downloaded and installed the Oracle paravirtualized VM template for EL5U3/DB 11.1.07/Agent 1.0.2.05 to a 2.1.5 VM Server. I have used the xm create -c vm.cfg command to start up the domU. After a short period of time, an xm list shows the status as blocked. The console shows this:
    Linux version 2.6.18-128.0.0.0.2.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-44)) #1 SMP Wed Jan 21 05:49:36 EST 2009
    BIOS-provided physical RAM map:
    Xen: 0000000000000000 - 0000000080800000 (usable)
    1328MB HIGHMEM available.
    727MB LOWMEM available.
    NX (Execute Disable) protection: active
    ACPI in unprivileged domain disabled
    Built 1 zonelists. Total pages: 526336
    Kernel command line: ro root=LABEL=/ S
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    CPU 0 irqstacks, hard=c0744000 soft=c0724000
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Xen reported: 2792.998 MHz processor.
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Software IO TLB disabled
    vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
    Memory: 2065604k/2105344k available (2126k kernel code, 30380k reserved, 875k data, 176k init, 1359880k highmem)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 6984.47 BogoMIPS (lpj=13968955)
    Security Framework v1.0.0 initialized
    SELinux: Initializing.
    selinux_register_security: Registering secondary module capability
    Capability LSM initialized as secondary
    Mount-cache hash table entries: 512
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 256K
    CPU: L3 cache: 8192K
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 13k freed
    Brought up 1 CPUs
    checking if image is initramfs... it is
    Freeing initrd memory: 5584k freed
    Grant table initialized
    NET: Registered protocol family 16
    ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06F2AA0 could not acquire Mutex [2] [20060707]
    No dock devices found.
    ACPI Exception (utmutex-0262): AE_BAD_PARAMETER, Thread C06F2AA0 could not acquire Mutex [2] [20060707]
    Brought up 1 CPUs
    PCI: setting up Xen PCI frontend stub
    ACPI: Interpreter disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI: disabled
    xen_mem: Initialising balloon driver.
    usbcore: registered new driver usbfs
    usbcore: registered new driver hub
    PCI: System does not support PCI
    PCI: System does not support PCI
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    audit: initializing netlink socket (disabled)
    type=2000 audit(1253809727.462:1): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Initializing Cryptographic API
    alg: No test for crc32c (crc32c-generic)
    ksign: Installing public key data
    Loading keyring
    - Added public key 5739E02E34E738D4
    - User ID: Oracle USA, Inc. (Kernel Module GPG key)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    rtc: IRQ 8 is not free.
    Non-volatile memory driver v1.2
    Linux agpgart interface v0.101 (c) Dave Jones
    RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
    Xen virtual console successfully installed as xvc0
    Event-channel device installed.
    Console: switching to colour frame buffer device 100x37
    input: Xen Virtual Keyboard/Mouse as /class/input/input0
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
    ide-floppy driver 0.99.newide
    usbcore: registered new driver hiddev
    usbcore: registered new driver usbhid
    drivers/usb/input/hid-core.c: v2.6:USB HID core driver
    PNP: No PS/2 controller found. Probing ports directly.
    i8042.c: No controller found.
    mice: PS/2 mouse device common for all mice
    md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
    md: bitmap version 4.39
    TCP bic registered
    Initializing IPsec netlink socket
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    XENBUS: Device with no driver: device/vbd/51712
    XENBUS: Device with no driver: device/vbd/51728
    XENBUS: Device with no driver: device/vbd/51744
    XENBUS: Device with no driver: device/vbd/51760
    XENBUS: Device with no driver: device/vif/0
    XENBUS: Device with no driver: device/console/0
    Freeing unused kernel memory: 176k freed
    Write protecting the kernel read-only data: 383k
    USB Universal Host Controller Interface driver v3.0
    SCSI subsystem initialized
    device-mapper: uevent: version 1.0.3
    device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: [email protected]
    device-mapper: dm-raid45: initialized v0.2429
    Registering block device major 202
    xvda: xvda1 xvda2 xvda3
    xvdb: xvdb1
    xvdc: xvdc1
    xvdd: xvdd1
    EXT3-fs: INFO: recovery required on readonly filesystem.
    EXT3-fs: write access will be enabled during recovery.
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: recovery complete.
    EXT3-fs: mounted filesystem with ordered data mode.
    SELinux: Disabled at runtime.
    type=1404 audit(1253810793.906:2): selinux=0 auid=4294967295 ses=4294967295
    At this point, it just hangs. I can't type anything in to the console.
    My vm.cfg is this:
    bootloader = '/usr/bin/pygrub'
    disk = ['file:/OVS/running_pool/110_dsrepo1/System.img,xvda,w',
    'file:/OVS/running_pool/110_dsrepo1/db11g.img,xvdb,w',
    'file:/OVS/running_pool/110_dsrepo1/oradata.img,xvdc,w',
    'file:/OVS/running_pool/110_dsrepo1/agent10g.img,xvdd,w',
    memory = '2048'
    name = '110_dsrepo1'
    on_crash = 'restart'
    on_reboot = 'restart'
    uuid = '37d0f14d-41fb-c7eb-93b1-34085b0af2fb'
    maxcpus = 1
    vcpus = 1
    vfb = ['type=vnc,vncunused=1,vnclisten=0.0.0.0,vncpasswd=dsrepomgr']
    vif = ['bridge=xenbr4,mac=00:16:3E:10:2B:8F,type=netfront']
    vif_other_config = []
    Can anyone help me figure out why the domU is just hanging/blocked?
    TIA

    pasinc wrote:
    Can anyone help me figure out why the domU is just hanging/blocked?It's not hanging (blocked just means it doesn't need the CPU) -- it's just switched into a graphic mode that the console view can't display. You can either VNC into the guest, or change the kernel boot parameters by removing rhgb quiet and replacing them with console=xvc0 -- this should allow you to see the full boot process and answer the first-boot interview questions without using VNC.
    You can get the VNC details by running: virsh dumpxml <domain ID> and you can get the domain ID from the xm list output.

  • How to get my wireless working ?

    hey guys today i had to connect using my wireless but I couldn't.
    So i follow this wiki http://wiki.archlinux.org/index.php/Wireless_Setup
    But when i typed lshwd
    lshwd
    00:00.0 Host bridge: Intel Corp.|Mobile Memory Controller Hub (intel-agp)
    00:02.0 VGA compatible controller: Intel Corp.|Mobile Integrated Graphics Controller (i810)
    00:02.1 Display controller: Intel Corp.|Mobile Integrated Graphics Controller (vesa)
    00:1b.0 Audio device: Intel Corp.|I/O Controller Hub High Definition Audio (snd-hda-intel)
    00:1c.0 PCI bridge: Intel Corp.|I/O Controller Hub PCI Express Port 1 (unknown)
    00:1c.1 PCI bridge: Intel Corp.|I/O Controller Hub PCI Express Port 2 (unknown)
    00:1d.0 USB Controller: Intel Corp.|I/O Controller Hub UHCI USB #1 (unknown)
    00:1d.1 USB Controller: Intel Corp.|I/O Controller Hub UHCI USB #2 (unknown)
    00:1d.2 USB Controller: Intel Corp.|I/O Controller Hub UHCI USB #3 (unknown)
    00:1d.3 USB Controller: Intel Corp.|I/O Controller Hub UHCI USB #4 (unknown)
    00:1e.0 PCI bridge: Intel Corp.|82801 Hub Interface to PCI Bridge (hw_random)
    00:1f.0 ISA bridge: Intel Corp.|Mobile I/O Controller Hub LPC (i8xx_tco)
    00:1f.2 IDE interface: Intel Corp.|Mobile I/O Controller Hub SATA cc=IDE (ata_piix)
    00:1f.3 SMBus: Intel Corp.|I/O Controller Hub SMBus (i2c-i801)
    01:0a.0 FireWire (IEEE 1394): Intel Corp.|I/O Controller Hub SMBus (unknown)
    01:0a.2 Generic system peripheral [0805]: Intel Corp.|I/O Controller Hub SMBus (unknown)
    01:0a.3 Mass storage controller: Intel Corp.|I/O Controller Hub SMBus (unknown)
    06:00.0 Ethernet controller: Marvell Technology Group Ltd.|88E8055 PCI-E Gigabit Ethernet Controller (sky2)
    004:001 USB Hub: Virtual|Hub (hub)
    002:001 USB Hub: Virtual|Hub (hub)
    003:002 USB Vendor Specific Class: 802.11 bg WLAN (unknown)
    003:001 USB Hub: Virtual|Hub (hub)
    001:001 USB Hub: Virtual|Hub (hub)
    ---:--- Mouse: Generic PS/2 Wheel Mouse [/dev/psaux] (msintellips/2)
    I couldn't discover what is my Wireless card..
    So which driver should I use with my wireless ?
    Thanks
    I don't no if it can be helpful but there is my dmesg
    Linux version 2.6.22-ARCH (root@workstation64) (gcc version 4.2.1) #1 SMP PREEMPT Fri Aug 31 19:54:09 UTC 2007
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
    BIOS-e820: 000000003f7d0000 - 000000003f7de000 (ACPI data)
    BIOS-e820: 000000003f7de000 - 000000003f800000 (ACPI NVS)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    119MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000ff780
    Entering add_active_range(0, 0, 260048) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 260048
    early_node_map[1] active PFN ranges
    0: 0 -> 260048
    On node 0 totalpages: 260048
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 239 pages used for memmap
    HighMem zone: 30433 pages, LIFO batch:7
    DMI 2.3 present.
    ACPI: RSDP 000F8A20, 0014 (r0 ACPIAM)
    ACPI: RSDT 3F7D0000, 0038 (r1 FSC PC 2000707 MSFT 97)
    ACPI: FACP 3F7D0200, 0084 (r2 FSC OEMFACP 2000707 MSFT 97)
    ACPI: DSDT 3F7D05B0, 43D5 (r1 X20IA X20IA005 5 INTL 2002026)
    ACPI: FACS 3F7DE000, 0040
    ACPI: APIC 3F7D0390, 005C (r1 FSC OEMAPIC 2000707 MSFT 97)
    ACPI: MCFG 3F7D03F0, 003C (r1 FSC OEMMCFG 2000707 MSFT 97)
    ACPI: SLIC 3F7D0430, 0176 (r1 FSC PC 2000707 MSFT 97)
    ACPI: OEMB 3F7DE040, 0114 (r1 FSC AMI_OEM 2000707 MSFT 97)
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 6:15 APIC version 20
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    Processor #1 6:15 APIC version 20
    ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 40000000 (gap: 3f800000:bf600000)
    Built 1 zonelists. Total pages: 258017
    Kernel command line: root=/dev/sda4 ro
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 1596.018 MHz processor.
    Console: colour VGA+ 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 1025092k/1040192k available (2393k kernel code, 14364k reserved, 783k data, 304k init, 122688k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff82000 - 0xfffff000 ( 500 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc0421000 - 0xc046d000 ( 304 kB)
    .data : 0xc035641f - 0xc041a1bc ( 783 kB)
    .text : 0xc0100000 - 0xc035641f (2393 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 3195.82 BogoMIPS (lpj=5324516)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
    monitor/mwait feature present.
    using mwait in idle threads.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Early unpacking initramfs... done
    ACPI: Core revision 20070126
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    CPU0: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz stepping 06
    SMP alternatives: switching to SMP code
    Booting processor 1/1 eip 3000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3203.02 BogoMIPS (lpj=5337639)
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
    monitor/mwait feature present.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 2048K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel(R) Core(TM)2 CPU T5200 @ 1.60GHz stepping 06
    Total of 2 processors activated (6399.84 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    migration_cost=57
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
    PCI: Not using MMCONFIG.
    PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
    PCI quirk: region 0480-04bf claimed by ICH6 GPIO
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 12 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    PCI: Cannot allocate resource region 7 of bridge 0000:00:1e.0
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    pnp: 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
    pnp: 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
    pnp: 00:08: iomem range 0xfed20000-0xfed8ffff has been reserved
    pnp: 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
    pnp: 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
    pnp: 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
    pnp: 00:09: iomem range 0xfee00000-0xfee00fff could not be reserved
    pnp: 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
    pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved
    pnp: 00:0b: iomem range 0xc0000-0xcffff could not be reserved
    pnp: 00:0b: iomem range 0xe0000-0xfffff could not be reserved
    pnp: 00:0b: iomem range 0x100000-0x3f7fffff could not be reserved
    Time: tsc clocksource has been installed.
    PCI: Bridge: 0000:00:1c.0
    IO window: e000-efff
    MEM window: feb00000-febfffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.1
    IO window: d000-dfff
    MEM window: fc000000-feafffff
    PREFETCH window: f4000000-faffffff
    PCI: Bridge: 0000:00:1e.0
    IO window: disabled.
    MEM window: fb700000-fbffffff
    PREFETCH window: f2000000-f3ffffff
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    PCI: Enabling device 0000:00:1c.1 (0106 -> 0107)
    ACPI: PCI Interrupt 0000:00:1c.1[b] -> GSI 17 (level, low) -> IRQ 17
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 1540k freed
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: disabled - APM is not SMP safe.
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 [email protected]).
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:00:02.0
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.1:pcie00]
    Allocate Port Service[0000:00:1c.1:pcie02]
    isapnp: Scanning for PnP cards...
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    loop: module loaded
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.0.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Freeing unused kernel memory: 304k freed
    input: AT Translated Set 2 keyboard as /class/input/input1
    libata version 2.21 loaded.
    ata_piix 0000:00:1f.2: version 2.11
    ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
    ACPI: PCI Interrupt 0000:00:1f.2[b] -> GSI 19 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi0 : ata_piix
    scsi1 : ata_piix
    ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
    ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
    ata1.00: ATA-7: WDC WD1200BEVS-22RST0, 04.01G04, max UDMA/133
    ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata1.00: configured for UDMA/133
    ata2.00: ATAPI: Slimtype DVDRW SSW-8015S, HSU1, max UDMA/33
    ata2.00: configured for UDMA/33
    scsi 0:0:0:0: Direct-Access ATA WDC WD1200BEVS-2 04.0 PQ: 0 ANSI: 5
    scsi 1:0:0:0: CD-ROM Slimtype DVDRW SSW-8015S HSU1 PQ: 0 ANSI: 5
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000c480
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    ACPI: PCI Interrupt 0000:00:1d.1[b] -> GSI 19 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000c800
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
    uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000c880
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1d.3 to 64
    uhci_hcd 0000:00:1d.3: UHCI Host Controller
    uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
    uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000cc00
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 2 ports detected
    usb 3-2: new full speed USB device using uhci_hcd and address 2
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    usb 3-2: configuration #1 chosen from 1 choice
    ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:06:00.0 to 64
    sky2 0000:06:00.0: v1.14 addr 0xfebfc000 irq 16 Yukon-EC Ultra (0xb4) rev 2
    sky2 eth0: addr 00:03:0d:63:84:09
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    fuse init (API version 7.8)
    ACPI: AC Adapter [AC0] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /class/input/input2
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /class/input/input3
    ACPI: Lid Switch [LID]
    input: Sleep Button (CM) as /class/input/input4
    ACPI: Sleep Button (CM) [SLPB]
    input: Power Button (CM) as /class/input/input5
    ACPI: Power Button (CM) [PWRB]
    ACPI: CPU0 (power states: C1[C1] C2[C2])
    ACPI: Thermal Zone [THRM] (53 C)
    Linux agpgart interface v0.102 (c) Dave Jones
    agpgart: Detected an Intel 945GM Chipset.
    agpgart: Detected 7932K stolen memory.
    agpgart: AGP aperture is 256M @ 0xd0000000
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 1:0:0:0: Attached scsi generic sg1 type 5
    intel_rng: FWH not detected
    Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
    input: SynPS/2 Synaptics TouchPad as /class/input/input6
    ACPI: PCI Interrupt 0000:00:1f.3[b] -> GSI 19 (level, low) -> IRQ 18
    PCI: Enabling device 0000:01:0a.0 (0015 -> 0017)
    ACPI: PCI Interrupt 0000:01:0a.0[A] -> GSI 18 (level, low) -> IRQ 20
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d0000-d07ff] Max Packet=[2048] IR/IT contexts=[8/8]
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    sdhci: SDHCI controller found at 0000:01:0a.2 [1217:7120] (rev 1)
    ACPI: PCI Interrupt 0000:01:0a.2[A] -> GSI 18 (level, low) -> IRQ 20
    sdhci:slot0: Unknown controller version (16). You may experience problems.
    mmc0: SDHCI at 0xf1100000 irq 20 PIO
    rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month
    input: PC Speaker as /class/input/input7
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d494000e58d]
    EXT3 FS on sda4, internal journal
    Adding 499792k swap on /dev/sda3. Priority:-1 extents:1 across:499792k
    sky2 eth0: enabling interface
    sky2 eth0: ram buffer 0K
    sky2 eth0: Link is up at 100 Mbps, full duplex, flow control rx
    [drm] Initialized drm 1.1.0 20060810
    ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
    [drm] Initialized i915 1.6.0 20060119 on minor 0
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver

    lspci -vv
    lspci -vv
    00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
    Subsystem: Uniwill Computer Corp Unknown device 9900
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
    Latency: 0
    Capabilities: <access denied>
    00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 [VGA])
    Subsystem: Uniwill Computer Corp Unknown device 9900
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at fb600000 (32-bit, non-prefetchable) [size=512K]
    Region 1: I/O ports at c400 [size=8]
    Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
    Region 3: Memory at fb680000 (32-bit, non-prefetchable) [size=256K]
    Capabilities: <access denied>
    00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
    Subsystem: Uniwill Computer Corp Unknown device 9900
    Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Region 0: Memory at 40000000 (32-bit, non-prefetchable) [disabled] [size=512K]
    Capabilities: <access denied>
    00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
    Subsystem: Uniwill Computer Corp Unknown device 9075
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at fb6fc000 (64-bit, non-prefetchable) [size=16K]
    Capabilities: <access denied>
    00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
    I/O behind bridge: 0000e000-0000efff
    Memory behind bridge: feb00000-febfffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: <access denied>
    00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 32 bytes
    Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: fc000000-feafffff
    Prefetchable memory behind bridge: 00000000f4000000-00000000faffffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: <access denied>
    00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Uniwill Computer Corp Unknown device 9072
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin A routed to IRQ 19
    Region 4: I/O ports at c480 [size=32]
    00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Uniwill Computer Corp Unknown device 9072
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin B routed to IRQ 18
    Region 4: I/O ports at c800 [size=32]
    00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Uniwill Computer Corp Unknown device 9072
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin C routed to IRQ 20
    Region 4: I/O ports at c880 [size=32]
    00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02) (prog-if 00 [UHCI])
    Subsystem: Uniwill Computer Corp Unknown device 9072
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin D routed to IRQ 16
    Region 4: I/O ports at cc00 [size=32]
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) (prog-if 01 [Subtractive decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Bus: primary=00, secondary=01, subordinate=02, sec-latency=32
    Memory behind bridge: fb700000-fbffffff
    Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff
    Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
    BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
    Capabilities: <access denied>
    00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
    Subsystem: Uniwill Computer Corp Unknown device 9072
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Capabilities: <access denied>
    00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02) (prog-if 80 [Master])
    Subsystem: Uniwill Computer Corp Unknown device 9072
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0
    Interrupt: pin B routed to IRQ 18
    Region 0: I/O ports at 01f0 [size=8]
    Region 1: I/O ports at 03f4 [size=1]
    Region 2: I/O ports at 0170 [size=8]
    Region 3: I/O ports at 0374 [size=1]
    Region 4: I/O ports at ffa0 [size=16]
    Capabilities: <access denied>
    00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
    Subsystem: Uniwill Computer Corp Unknown device 9072
    Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Interrupt: pin B routed to IRQ 18
    Region 4: I/O ports at 0400 [size=32]
    01:0a.0 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02) (prog-if 10 [OHCI])
    Subsystem: Uniwill Computer Corp Unknown device 300b
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 64, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at 000d0000 (32-bit, non-prefetchable) [size=4K]
    Region 1: Memory at fb7fe000 (32-bit, non-prefetchable) [size=2K]
    Capabilities: <access denied>
    01:0a.2 Generic system peripheral [0805]: O2 Micro, Inc. Integrated MMC/SD Controller (rev 01)
    Subsystem: Uniwill Computer Corp Unknown device 300b
    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+
    Interrupt: pin A routed to IRQ 20
    Region 0: Memory at f1100000 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>
    01:0a.3 Mass storage controller: O2 Micro, Inc. Integrated MS/xD Controller (rev 01)
    Subsystem: Uniwill Computer Corp Unknown device 300b
    Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+
    Interrupt: pin A routed to IRQ 5
    Region 0: Memory at fb7ff000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>
    06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 10)
    Subsystem: Uniwill Computer Corp Unknown device 6100
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
    Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 16
    Region 0: Memory at febfc000 (64-bit, non-prefetchable) [size=16K]
    Region 2: I/O ports at e800 [size=256]
    Expansion ROM at febc0000 [disabled] [size=128K]
    Capabilities: <access denied>
    Now I will try some drivers and i post here my results.
    tanks

  • New Installation : Login Delays and Wifi Problems

    Hey There,
    I just a HP Pavilion DV2850ET laptop computer and decided to run Arch on it. But I have 2 major problems as for now. I'll be very pleased if I get over them.
    1) When the kernel starts loading with vga=792 parameter on, 2 Arch Linux logo shows up instead of 1.. I don't think that this is normal.
    2) I've installed all packages with the newest ISO image release: Archlinux-i686-2007.08-2.core.iso - It's installed without any problems. When the login prompt appears (that I'm going to write root to do the rest of the installation for a while) I can't write anything for about 10-15 seconds. After the 10-15 seconds of waiting, I can write whatever I want.. But this happens all the time and I have to wait everytime I open the computer. I thought that maybe this could be something related with the kernel installed so I upgraded to testing. But nothing changed. This is the most annoying part actually..
    3) I have 07:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02) on the laptop. There are several modules for this card as far as I can see like: ipw3945, ipl3945, etc.. During the installation, I let hwdetect to fill modules part in rc.conf and it added these modules: sky2 iwl3945 snd-mixer-oss snd-pcm-oss snd-hwdep snd-page-alloc snd-pcm snd-timer snd snd-hda-intel soundcore - What are all these sound modules any way ? Are they really necessary ?
    Here are lspci and dmesg outputs. I hope they help..
    lspci:
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
    00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 03)
    00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
    00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
    00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
    00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 03)
    01:00.0 VGA compatible controller: nVidia Corporation GeForce 8400M GS (rev a1)
    05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8039 PCI-E Fast Ethernet Controller (rev 14)
    07:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
    08:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
    08:09.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
    08:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
    08:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    08:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
    dmesg:
    Linux version 2.6.23-ARCH (root@T-POWA-LX) (gcc version 4.2.2) #1 SMP PREEMPT Mon Oct 15 16:46:31 UTC 2007
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000ce000 - 00000000000d0000 (reserved)
    BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000007fec0000 (usable)
    BIOS-e820: 000000007fec0000 - 000000007fedf000 (ACPI NVS)
    BIOS-e820: 000000007fedf000 - 0000000080000000 (reserved)
    BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
    BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
    BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
    BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
    BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
    1150MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000f7e50
    Entering add_active_range(0, 0, 523968) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 523968
    Movable zone start PFN for each node
    early_node_map[1] active PFN ranges
    0: 0 -> 523968
    On node 0 totalpages: 523968
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 2301 pages used for memmap
    HighMem zone: 292291 pages, LIFO batch:31
    Movable zone: 0 pages used for memmap
    DMI present.
    ACPI: RSDP 000F7E20, 0024 (r2 PTLTD )
    ACPI: XSDT 7FED05BA, 0074 (r1 HPQOEM SLIC-MPC 6040000 LTP 0)
    ACPI: FACP 7FEDBC3A, 00F4 (r3 INTEL CRESTLNE 6040000 ALAN 1)
    ACPI: DSDT 7FED12C7, A8FF (r2 INTEL CRESTLNE 6040000 MSFT 3000000)
    ACPI: FACS 7FEDEFC0, 0040
    ACPI: HPET 7FEDBD2E, 0038 (r1 INTEL CRESTLNE 6040000 LOHR 5A)
    ACPI: MCFG 7FEDBD66, 003C (r1 INTEL CRESTLNE 6040000 LOHR 5A)
    ACPI: TCPA 7FEDBDA2, 0032 (r1 Intel CRESTLN 6040000 5A52)
    ACPI: TMOR 7FEDBDD4, 0026 (r1 PTLTD 6040000 PTL 3)
    ACPI: SLIC 7FEDBDFA, 0176 (r1 HPQOEM SLIC-MPC 6040000 HPQ 1)
    ACPI: APIC 7FEDBF70, 0068 (r1 PTLTD APIC 6040000 LTP 0)
    ACPI: BOOT 7FEDBFD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
    ACPI: SSDT 7FED0FEA, 02DD (r1 SataRe SataAhci 1000 INTL 20060912)
    ACPI: SSDT 7FED062E, 04E6 (r1 PmRef CpuPm 3000 INTL 20060912)
    ACPI: PM-Timer IO Port: 0x1008
    ACPI: HPET id: 0x8086a201 base: 0xfed00000
    Intel MultiProcessor Specification v1.4
    Virtual Wire compatibility mode.
    OEM ID: INTEL Product ID: S. Rosa CRB APIC at: 0xFEE00000
    Processor #0 6:15 APIC version 20
    Processor #1 6:15 APIC version 20
    I/O APIC #2 Version 32 at 0xFEC00000.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Processors: 2
    Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
    swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
    swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000ce000
    swsusp: Registered nosave memory region: 00000000000ce000 - 00000000000d0000
    swsusp: Registered nosave memory region: 00000000000d0000 - 00000000000e0000
    swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
    Built 1 zonelists in Zone order. Total pages: 519875
    Kernel command line: root=/dev/sda2 ro quiet vga=792 noapic nolapic
    mapped APIC to ffffb000 (fee00000)
    mapped IOAPIC to ffffa000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 1995.160 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 2071792k/2095872k available (2442k kernel code, 22764k reserved, 814k data, 296k init, 1178368k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff80000 - 0xfffff000 ( 508 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc0435000 - 0xc047f000 ( 296 kB)
    .data : 0xc0362839 - 0xc042e21c ( 814 kB)
    .text : 0xc0100000 - 0xc0362839 (2442 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
    Calibrating delay using timer specific routine.. 3994.51 BogoMIPS (lpj=6655229)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
    monitor/mwait feature present.
    using mwait in idle threads.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Early unpacking initramfs... done
    ACPI: Core revision 20070126
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    ACPI: setting ELCR to 0200 (from 0c00)
    CPU0: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
    SMP alternatives: switching to SMP code
    Booting processor 1/1 eip 3000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 3991.19 BogoMIPS (lpj=6649906)
    CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001 00000001
    monitor/mwait feature present.
    CPU: L1 I cache: 32K, L1 D cache: 32K
    CPU: L2 cache: 4096K
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e3bd 00000000 00000001 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    CPU1: Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping 0a
    Total of 2 processors activated (7986.70 BogoMIPS).
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    Brought up 2 CPUs
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: Using MMCONFIG
    Setting up standard PCI resources
    ACPI: EC: Look up EC in DSDT
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: System BIOS is requesting _OSI(Linux)
    ACPI: If "acpi_osi=Linux" works better,
    Please send dmidecode to [email protected]
    ACPI: Interpreter enabled
    ACPI: (supports S0 S3 S4 S5)
    ACPI: Using PIC for interrupt routing
    ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Transparent bridge - 0000:00:1e.0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
    ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 10 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    Time: tsc clocksource has been installed.
    pnp: 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
    pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
    pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
    pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
    pnp: 00:06: iomem range 0xfed00000-0xfed003ff could not be reserved
    PCI: Failed to allocate mem resource #6:20000@e0000000 for 0000:01:00.0
    PCI: Bridge: 0000:00:01.0
    IO window: 2000-2fff
    MEM window: cc000000-ceffffff
    PREFETCH window: d0000000-dfffffff
    PCI: Bridge: 0000:00:1c.0
    IO window: 3000-3fff
    MEM window: f2000000-f3ffffff
    PREFETCH window: f0000000-f1ffffff
    PCI: Bridge: 0000:00:1c.1
    IO window: 4000-4fff
    MEM window: f4000000-f40fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.2
    IO window: disabled.
    MEM window: disabled.
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1c.3
    IO window: disabled.
    MEM window: f4100000-f41fffff
    PREFETCH window: disabled.
    PCI: Bridge: 0000:00:1e.0
    IO window: disabled.
    MEM window: f4200000-f42fffff
    PREFETCH window: disabled.
    ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
    PCI: setting IRQ 10 as level-triggered
    ACPI: PCI Interrupt 0000:00:01.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
    PCI: setting IRQ 11 as level-triggered
    ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    ACPI: PCI Interrupt 0000:00:1c.1[b] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    ACPI: PCI Interrupt 0000:00:1c.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1c.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    PCI: Setting latency timer of device 0000:00:1e.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 0
    Freeing initrd memory: 1578k freed
    Simple Boot Flag at 0x36 set to 0x1
    apm: BIOS not found.
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 [email protected]).
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:01:00.0
    PCI: Setting latency timer of device 0000:00:01.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:01.0:pcie00]
    Allocate Port Service[0000:00:01.0:pcie02]
    Allocate Port Service[0000:00:01.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.0:pcie00]
    Allocate Port Service[0000:00:1c.0:pcie02]
    Allocate Port Service[0000:00:1c.0:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.1 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.1:pcie00]
    Allocate Port Service[0000:00:1c.1:pcie02]
    Allocate Port Service[0000:00:1c.1:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.2 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.2:pcie00]
    Allocate Port Service[0000:00:1c.2:pcie02]
    Allocate Port Service[0000:00:1c.2:pcie03]
    PCI: Setting latency timer of device 0000:00:1c.3 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:1c.3:pcie00]
    Allocate Port Service[0000:00:1c.3:pcie02]
    Allocate Port Service[0000:00:1c.3:pcie03]
    vesafb: framebuffer at 0xcd000000, mapped to 0xf8880000, using 6144k, total 14336k
    vesafb: mode is 1024x768x32, linelength=4096, pages=1
    vesafb: protected mode interface info at c000:b540
    vesafb: pmi: set display start = c00cb5a3, set palette = c00cb5fe
    vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    loop: module loaded
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    i8042.c: Detected active multiplexing controller, rev 1.1.
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX0 port at 0x60,0x64 irq 12
    serio: i8042 AUX1 port at 0x60,0x64 irq 12
    serio: i8042 AUX2 port at 0x60,0x64 irq 12
    serio: i8042 AUX3 port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Freeing unused kernel memory: 296k freed
    input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
    libata version 2.21 loaded.
    ahci 0000:00:1f.2: version 2.3
    ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
    ACPI: PCI Interrupt 0000:00:1f.2[b] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
    ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
    ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
    PCI: Setting latency timer of device 0000:00:1f.2 to 64
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    ata1: SATA max UDMA/133 cmd 0xf8830100 ctl 0x00000000 bmdma 0x00000000 irq 10
    ata2: SATA max UDMA/133 cmd 0xf8830180 ctl 0x00000000 bmdma 0x00000000 irq 10
    ata3: SATA max UDMA/133 cmd 0xf8830200 ctl 0x00000000 bmdma 0x00000000 irq 10
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-7: ST9160821AS, 3.BHD, max UDMA/100
    ata1.00: 312581808 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/100
    ata2: SATA link down (SStatus 0 SControl 300)
    ata3: SATA link down (SStatus 0 SControl 300)
    scsi 0:0:0:0: Direct-Access ATA ST9160821AS 3.BH PQ: 0 ANSI: 5
    ata_piix 0000:00:1f.1: version 2.12
    ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1f.1 to 64
    scsi3 : ata_piix
    scsi4 : ata_piix
    ata4: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011830 irq 14
    ata5: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011838 irq 15
    ata4.00: ATAPI: TSSTcorpCD/DVDW TS-L632M, 0A17, max MWDMA2
    ata4.00: configured for MWDMA2
    scsi 3:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-L632M 0A17 PQ: 0 ANSI: 5
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    USB Universal Host Controller Interface driver v3.0
    ACPI: PCI Interrupt 0000:00:1a.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1a.0 to 64
    uhci_hcd 0000:00:1a.0: UHCI Host Controller
    uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    uhci_hcd 0000:00:1a.0: irq 10, io base 0x00001840
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 2 ports detected
    ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1a.1[b] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1a.1 to 64
    uhci_hcd 0000:00:1a.1: UHCI Host Controller
    uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
    uhci_hcd 0000:00:1a.1: irq 11, io base 0x00001860
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1a.7[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1a.7 to 64
    ehci_hcd 0000:00:1a.7: EHCI Host Controller
    ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
    ehci_hcd 0000:00:1a.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1a.7
    ehci_hcd 0000:00:1a.7: irq 10, io mem 0xf4505c00
    ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 4 ports detected
    ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
    ACPI: PCI Interrupt 0000:00:1d.7[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.7 to 64
    ehci_hcd 0000:00:1d.7: EHCI Host Controller
    ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
    ehci_hcd 0000:00:1d.7: debug port 1
    PCI: cache line size of 32 is not supported by device 0000:00:1d.7
    ehci_hcd 0000:00:1d.7: irq 11, io mem 0xf4506000
    ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 6 ports detected
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda:sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 3:0:0:0: Attached scsi CD-ROM sr0
    ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.0 to 64
    uhci_hcd 0000:00:1d.0: UHCI Host Controller
    uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
    uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001880
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 2 ports detected
    sda1 sda2 sda3
    sd 0:0:0:0: [sda] Attached SCSI disk
    ACPI: PCI Interrupt 0000:00:1d.1[b] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:00:1d.1 to 64
    uhci_hcd 0000:00:1d.1: UHCI Host Controller
    uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
    uhci_hcd 0000:00:1d.1: irq 11, io base 0x000018a0
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 2 ports detected
    ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1d.2 to 64
    uhci_hcd 0000:00:1d.2: UHCI Host Controller
    uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
    uhci_hcd 0000:00:1d.2: irq 10, io base 0x000018c0
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    usb 4-5: new high speed USB device using ehci_hcd and address 3
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    usb 4-5: configuration #1 chosen from 1 choice
    usb 5-1: new low speed USB device using uhci_hcd and address 2
    usb 5-1: configuration #1 chosen from 1 choice
    usb 2-1: new full speed USB device using uhci_hcd and address 2
    usb 2-1: configuration #1 chosen from 1 choice
    ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:05:00.0 to 64
    sky2 0000:05:00.0: v1.18 addr 0xf4000000 irq 11 Yukon-FE (0xb7) rev 3
    sky2 eth0: addr 00:16:d3:f0:65:5b
    usb 7-2: new full speed USB device using uhci_hcd and address 2
    iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.0ds
    iwl3945: Copyright(c) 2003-2007 Intel Corporation
    ACPI: PCI Interrupt 0000:07:00.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    PCI: Setting latency timer of device 0000:07:00.0 to 64
    iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
    usb 7-2: configuration #1 chosen from 1 choice
    iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
    wmaster0: Selected rate control algorithm 'iwl-3945-rs'
    Bluetooth: Core ver 2.11
    NET: Registered protocol family 31
    Bluetooth: HCI device and connection manager initialized
    Bluetooth: HCI socket layer initialized
    Bluetooth: HCI USB driver ver 2.9
    usbcore: registered new interface driver hci_usb
    ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
    ACPI: PCI Interrupt 0000:00:1b.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
    PCI: Setting latency timer of device 0000:00:1b.0 to 64
    ACPI: AC Adapter [ADP1] (on-line)
    ACPI: Battery Slot [BAT0] (battery present)
    input: Power Button (FF) as /devices/virtual/input/input2
    ACPI: Power Button (FF) [PWRF]
    input: Lid Switch as /devices/virtual/input/input3
    ACPI: Lid Switch [LID0]
    input: Sleep Button (CM) as /devices/virtual/input/input4
    ACPI: Sleep Button (CM) [SLPB]
    ACPI: SSDT 7FED0CA8, 027A (r1 PmRef Cpu0Ist 3000 INTL 20060912)
    ACPI: SSDT 7FED0B14, 010F (r1 PmRef Cpu0Cst 3001 INTL 20060912)
    ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
    ACPI: SSDT 7FED0F22, 00C8 (r1 PmRef Cpu1Ist 3000 INTL 20060912)
    ACPI: SSDT 7FED0C23, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20060912)
    ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
    Marking TSC unstable due to: possible TSC halt in C2.
    Time: hpet clocksource has been installed.
    ACPI: Thermal Zone [TZS0] (54 C)
    ACPI: Thermal Zone [TZS1] (65 C)
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sr 3:0:0:0: Attached scsi generic sg1 type 5
    usbcore: registered new interface driver hiddev
    Linux agpgart interface v0.102
    input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-1/5-1:1.0/input/input5
    input: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1d.0-1
    usbcore: registered new interface driver usbhid
    drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
    ACPI: PCI Interrupt 0000:00:1f.3[C] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
    input: PS/2 Mouse as /devices/virtual/input/input6
    input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input7
    input: Video Bus as /devices/virtual/input/input8
    ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    input: Video Bus as /devices/virtual/input/input9
    ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k
    ACPI: PCI Interrupt 0000:08:09.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
    sdhci: Secure Digital Host Controller Interface driver
    sdhci: Copyright(c) Pierre Ossman
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[f4200000-f42007ff] Max Packet=[2048] IR/IT contexts=[4/4]
    sdhci: SDHCI controller found at 0000:08:09.1 [1180:0822] (rev 22)
    ACPI: PCI Interrupt 0000:08:09.1[b] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    mmc0: SDHCI at 0xf4200800 irq 10 DMA
    EXT3 FS on sda2, internal journal
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[07e40a00fd365135]
    Clocksource tsc unstable (delta = -266484522 ns)
    atkbd.c: Unknown key pressed (translated set 2, code 0xd9 on isa0060/serio0).
    atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
    atkbd.c: Unknown key released (translated set 2, code 0xd9 on isa0060/serio0).
    atkbd.c: Use 'setkeycodes e059 <keycode>' to make it known.
    usb 4-4: new high speed USB device using ehci_hcd and address 5
    usb 4-4: configuration #1 chosen from 1 choice
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Initializing USB Mass Storage driver...
    scsi5 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 5
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    scsi 5:0:0:0: Direct-Access SanDisk Cruzer Micro 0.1 PQ: 0 ANSI: 2
    sd 5:0:0:0: [sdb] 2001888 512-byte hardware sectors (1025 MB)
    sd 5:0:0:0: [sdb] Write Protect is off
    sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
    sd 5:0:0:0: [sdb] Assuming drive cache: write through
    sd 5:0:0:0: [sdb] 2001888 512-byte hardware sectors (1025 MB)
    sd 5:0:0:0: [sdb] Write Protect is off
    sd 5:0:0:0: [sdb] Mode Sense: 03 00 00 00
    sd 5:0:0:0: [sdb] Assuming drive cache: write through
    sdb: sdb1 sdb2
    sd 5:0:0:0: [sdb] Attached SCSI removable disk
    sd 5:0:0:0: Attached scsi generic sg2 type 0
    usb-storage: device scan complete

    At this moment, I believe the ipw3945 module and it's deamon work better than the iwf3945. So you can start changing this. In the module line in rc.conf change iwf to ipw. In the deamons line add before the network deamon ipw3945d and youre done.
    The double archlogo is standard I think, got them too

  • System doesn't boot kernel26beyond

    Since a week or so, my system doesn't boot, unless I press <enter> and the power button a few times during the process.
    Once it has booted, everything works fine, but it is highly annoying nevertheless.
    it seems to have something to do with loading my hardware.
    Boot freezes after these log messages:
    Jul 23 12:18:49 (none) Linux version 2.6.17-beyond (root@sara) (gcc version 4.1.1) #1 SMP PREEMPT Sat Jul 22 22:14:12 EST 2006
    Jul 23 12:18:49 (none) BIOS-provided physical RAM map:
    Jul 23 12:18:49 (none) BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    Jul 23 12:18:49 (none) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    Jul 23 12:18:49 (none) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    Jul 23 12:18:49 (none) BIOS-e820: 0000000000100000 - 000000001ff40000 (usable)
    Jul 23 12:18:49 (none) BIOS-e820: 000000001ff40000 - 000000001ff50000 (ACPI data)
    Jul 23 12:18:49 (none) BIOS-e820: 000000001ff50000 - 0000000020000000 (ACPI NVS)
    Jul 23 12:18:49 (none) 0MB HIGHMEM available.
    Jul 23 12:18:49 (none) 511MB LOWMEM available.
    Jul 23 12:18:49 (none) On node 0 totalpages: 130880
    Jul 23 12:18:49 (none) DMA zone: 4096 pages, LIFO batch:0
    Jul 23 12:18:49 (none) Normal zone: 126784 pages, LIFO batch:31
    Jul 23 12:18:49 (none) DMI 2.3 present.
    Jul 23 12:18:49 (none) ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f5df0
    Jul 23 12:18:49 (none) ACPI: RSDT (v001 A M I  OEMRSDT  0x09000406 MSFT 0x00000097) @ 0x1ff40000
    Jul 23 12:18:49 (none) ACPI: FADT (v001 A M I  OEMFACP  0x09000406 MSFT 0x00000097) @ 0x1ff40200
    Jul 23 12:18:49 (none) ACPI: OEMB (v001 A M I  OEMBIOS  0x09000406 MSFT 0x00000097) @ 0x1ff50040
    Jul 23 12:18:49 (none) ACPI: DSDT (v001  1ABSP 1ABSP001 0x00000001 MSFT 0x02000001) @ 0x00000000
    Jul 23 12:18:49 (none) ACPI: PM-Timer IO Port: 0x408
    Jul 23 12:18:49 (none) Allocating PCI resources starting at 30000000 (gap: 20000000:e0000000)
    Jul 23 12:18:49 (none) Detected 1276.987 MHz processor.
    Jul 23 12:18:49 (none) Built 1 zonelists
    Jul 23 12:18:49 (none) Kernel command line: root=/dev/hda4 ro
    Jul 23 12:18:49 (none) Found and enabled local APIC!
    Jul 23 12:18:49 (none) mapped APIC to ffffd000 (fee00000)
    Jul 23 12:18:49 (none) Enabling fast FPU save and restore... done.
    Jul 23 12:18:49 (none) Enabling unmasked SIMD FPU exception support... done.
    Jul 23 12:18:49 (none) Initializing CPU#0
    Jul 23 12:18:49 (none) Event source pit configured with caps set: 07
    Jul 23 12:18:49 (none) PID hash table entries: 2048 (order: 11, 8192 bytes)
    Jul 23 12:18:49 (none) Console: colour VGA+ 80x25
    Jul 23 12:18:49 (none) Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
    Jul 23 12:18:49 (none) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
    Jul 23 12:18:49 (none) Memory: 514844k/523520k available (1921k kernel code, 8120k reserved, 725k data, 184k init, 0k highmem)
    Jul 23 12:18:49 (none) Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Jul 23 12:18:49 (none) Calibrating delay using timer specific routine.. 2197.93 BogoMIPS (lpj=1098965)
    Jul 23 12:18:49 (none) Security Framework v1.0.0 initialized
    Jul 23 12:18:49 (none) Mount-cache hash table entries: 512
    Jul 23 12:18:49 (none) CPU: After generic identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
    Jul 23 12:18:49 (none) CPU: After vendor identify, caps: afe9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
    Jul 23 12:18:49 (none) CPU: L1 I cache: 32K, L1 D cache: 32K
    Jul 23 12:18:49 (none) CPU: L2 cache: 2048K
    Jul 23 12:18:49 (none) CPU: After all inits, caps: afe9fbbf 00000000 00000000 00000040 00000180 00000000 00000000
    Jul 23 12:18:49 (none) Intel machine check architecture supported.
    Jul 23 12:18:49 (none) Intel machine check reporting enabled on CPU#0.
    Jul 23 12:18:49 (none) Checking 'hlt' instruction... OK.
    Jul 23 12:18:49 (none) SMP alternatives: switching to UP code
    Jul 23 12:18:49 (none) Freeing SMP alternatives: 16k freed
    Jul 23 12:18:49 (none) checking if image is initramfs... it is
    Jul 23 12:18:49 (none) Freeing initrd memory: 404k freed
    Jul 23 12:18:49 (none) ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    Jul 23 12:18:49 (none) ACPI: setting ELCR to 0200 (from 0c30)
    Jul 23 12:18:49 (none) CPU0: Intel(R) Pentium(R) M processor 1.60GHz stepping 06
    Jul 23 12:18:49 (none) SMP motherboard not detected.
    Jul 23 12:18:49 (none) lapic max_delta_ns: 1345393639
    Jul 23 12:18:49 (none) Event source pit new caps set: 01
    Jul 23 12:18:49 (none) Event source lapic configured with caps set: 06
    Jul 23 12:18:49 (none) Brought up 1 CPUs
    Jul 23 12:18:49 (none) migration_cost=0
    Jul 23 12:18:49 (none) NET: Registered protocol family 16
    Jul 23 12:18:49 (none) ACPI: bus type pci registered
    Jul 23 12:18:49 (none) PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
    Jul 23 12:18:49 (none) Setting up standard PCI resources
    Jul 23 12:18:49 (none) ACPI: Subsystem revision 20060127
    Jul 23 12:18:49 (none) ACPI Error (evregion-0303): No handler for Region [ECOR] (dff2e63c) [EmbeddedControl] [20060127]
    Jul 23 12:18:49 (none) ACPI Error (exfldio-0279): Region EmbeddedControl(3) has no handler [20060127]
    Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.PCI0.SBRG.EC0_.ACS_] (Node dff27900), AE_NOT_EXIST
    Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.AC__._INI] (Node dff27420), AE_NOT_EXIST
    Jul 23 12:18:49 (none) ACPI: Interpreter enabled
    Jul 23 12:18:49 (none) ACPI: Using PIC for interrupt routing
    Jul 23 12:18:49 (none) ACPI: PCI Root Bridge [PCI0] (0000:00)
    Jul 23 12:18:49 (none) PCI: Probing PCI hardware (bus 00)
    Jul 23 12:18:49 (none) ACPI Error (evregion-0303): No handler for Region [ECOR] (dff2e63c) [EmbeddedControl] [20060127]
    Jul 23 12:18:49 (none) ACPI Error (exfldio-0279): Region EmbeddedControl(3) has no handler [20060127]
    Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.PCI0.SBRG.EC0_.BATS] (Node dff278e0), AE_NOT_EXIST
    Jul 23 12:18:49 (none) ACPI Error (psparse-0517): Method parse/execution failed [_SB_.BAT0._STA] (Node dff245c0), AE_NOT_EXIST
    Jul 23 12:18:49 (none) ACPI Error (uteval-0158): Method execution failed [_SB_.BAT0._STA] (Node dff245c0), AE_NOT_EXIST
    Jul 23 12:18:49 (none) PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
    Jul 23 12:18:49 (none) PCI quirk: region 0500-053f claimed by ICH4 GPIO
    Jul 23 12:18:49 (none) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
    Jul 23 12:18:49 (none) Boot video device is 0000:01:00.0
    Jul 23 12:18:49 (none) PCI: Transparent bridge - 0000:00:1e.0
    Jul 23 12:18:49 (none) PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
    Jul 23 12:18:49 (none) Please report the result to linux-kernel to fix this permanently
    Jul 23 12:18:49 (none) PCI: Bus #07 (-#0a) is hidden behind transparent bridge #02 (-#02) (try 'pci=assign-busses')
    Jul 23 12:18:49 (none) Please report the result to linux-kernel to fix this permanently
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
    Jul 23 12:18:49 (none) ACPI: Embedded Controller [EC0] (gpe 28) interrupt mode.
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P2._PRT]
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0P1._PRT]
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 6 7 11 12)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKC] (IRQs *10 12)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 6 10)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKE] (IRQs 6 11) *0, disabled.
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7) *0, disabled.
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7) *0, disabled.
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKH] (IRQs 4 6 *10 12)
    Jul 23 12:18:49 (none) Linux Plug and Play Support v0.97 (c) Adam Belay
    Jul 23 12:18:49 (none) pnp: PnP ACPI init
    Jul 23 12:18:49 (none) pnp: PnP ACPI: found 15 devices
    Jul 23 12:18:49 (none) SCSI subsystem initialized
    Jul 23 12:18:49 (none) PCI: Using ACPI for IRQ routing
    Jul 23 12:18:49 (none) PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
    Jul 23 12:18:49 (none) pnp: 00:09: ioport range 0x480-0x48f has been reserved
    Jul 23 12:18:49 (none) pnp: 00:09: ioport range 0x5c0-0x5cf has been reserved
    Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x540-0x55f has been reserved
    Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x400-0x47f could not be reserved
    Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x480-0x48f has been reserved
    Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x500-0x53f has been reserved
    Jul 23 12:18:49 (none) pnp: 00:0d: ioport range 0x4c0-0x4cf has been reserved
    Jul 23 12:18:49 (none) PCI: Bridge: 0000:00:01.0
    Jul 23 12:18:49 (none) IO window: d000-dfff
    Jul 23 12:18:49 (none) MEM window: ff800000-ff8fffff
    Jul 23 12:18:49 (none) PREFETCH window: ce900000-de9fffff
    Jul 23 12:18:49 (none) PCI: Bus 3, cardbus bridge: 0000:02:01.0
    Jul 23 12:18:49 (none) IO window: 00001000-000010ff
    Jul 23 12:18:49 (none) IO window: 00001400-000014ff
    Jul 23 12:18:49 (none) PREFETCH window: 32000000-33ffffff
    Jul 23 12:18:49 (none) MEM window: 34000000-35ffffff
    Jul 23 12:18:49 (none) PCI: Bus 7, cardbus bridge: 0000:02:01.1
    Jul 23 12:18:49 (none) IO window: 00001800-000018ff
    Jul 23 12:18:49 (none) IO window: 00001c00-00001cff
    Jul 23 12:18:49 (none) PREFETCH window: 36000000-37ffffff
    Jul 23 12:18:49 (none) MEM window: 38000000-39ffffff
    Jul 23 12:18:49 (none) PCI: Bridge: 0000:00:1e.0
    Jul 23 12:18:49 (none) IO window: 1000-1fff
    Jul 23 12:18:49 (none) MEM window: ff900000-ff9fffff
    Jul 23 12:18:49 (none) PREFETCH window: dea00000-deafffff
    Jul 23 12:18:49 (none) PCI: Enabling device 0000:00:1e.0 (0106 -> 0107)
    Jul 23 12:18:49 (none) PCI: Setting latency timer of device 0000:00:1e.0 to 64
    Jul 23 12:18:49 (none) PCI: Enabling device 0000:02:01.0 (0000 -> 0003)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 4
    Jul 23 12:18:49 (none) PCI: setting IRQ 4 as level-triggered
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4
    Jul 23 12:18:49 (none) PCI: Setting latency timer of device 0000:02:01.0 to 64
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
    Jul 23 12:18:49 (none) PCI: setting IRQ 11 as level-triggered
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:02:01.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
    Jul 23 12:18:49 (none) PCI: Setting latency timer of device 0000:02:01.1 to 64
    Jul 23 12:18:49 (none) NET: Registered protocol family 2
    Jul 23 12:18:49 (none) IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
    Jul 23 12:18:49 (none) TCP established hash table entries: 16384 (order: 5, 196608 bytes)
    Jul 23 12:18:49 (none) TCP bind hash table entries: 8192 (order: 4, 98304 bytes)
    Jul 23 12:18:49 (none) TCP: Hash tables configured (established 16384 bind 8192)
    Jul 23 12:18:49 (none) TCP reno registered
    Jul 23 12:18:49 (none) apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    Jul 23 12:18:49 (none) apm: overridden by ACPI.
    Jul 23 12:18:49 (none) VFS: Disk quotas dquot_6.5.1
    Jul 23 12:18:49 (none) Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Jul 23 12:18:49 (none) Installing knfsd (copyright (C) 1996 [email protected]).
    Jul 23 12:18:49 (none) Initializing Cryptographic API
    Jul 23 12:18:49 (none) io scheduler noop registered
    Jul 23 12:18:49 (none) io scheduler anticipatory registered
    Jul 23 12:18:49 (none) io scheduler deadline registered
    Jul 23 12:18:49 (none) io scheduler cfq registered (default)
    Jul 23 12:18:49 (none) vesafb: ATI Technologies Inc., P10 , 01.00 (OEM: ATI MOBILITY RADEON 9600   )
    Jul 23 12:18:49 (none) vesafb: VBE version: 2.0
    Jul 23 12:18:49 (none) vesafb: protected mode interface info at c000:5680
    Jul 23 12:18:49 (none) vesafb: pmi: set display start = c00c56ee, set palette = c00c5728
    Jul 23 12:18:49 (none) vesafb: pmi: ports = d810 d816 d854 d838 d83c d85c d800 d804 d8b0 d8b2 d8b4
    Jul 23 12:18:49 (none) vesafb: no monitor limits have been set
    Jul 23 12:18:49 (none) vesafb: scrolling: redraw
    Jul 23 12:18:49 (none) Console: switching to colour frame buffer device 128x48
    Jul 23 12:18:49 (none) vesafb: framebuffer at 0xd0000000, mapped to 0xe0880000, using 6144k, total 65536k
    Jul 23 12:18:49 (none) fb0: VESA VGA frame buffer device
    Jul 23 12:18:49 (none) ACPI: AC Adapter [AC] (on-line)
    Jul 23 12:18:49 (none) ACPI: Battery Slot [BAT0] (battery present)
    Jul 23 12:18:49 (none) ACPI: Battery Slot [BAT1] (battery absent)
    Jul 23 12:18:49 (none) ACPI: Power Button (FF) [PWRF]
    Jul 23 12:18:49 (none) ACPI: Lid Switch [LID]
    Jul 23 12:18:49 (none) ACPI: Sleep Button (CM) [SLPB]
    Jul 23 12:18:49 (none) ACPI: Power Button (CM) [PWRB]
    Jul 23 12:18:49 (none) ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
    Jul 23 12:18:49 (none) ACPI: CPU0 (power states: C1[C1] C2[C2])
    Jul 23 12:18:49 (none) ACPI: Thermal Zone [THRM] (94 C)
    Jul 23 12:18:49 (none) isapnp: Scanning for PnP cards...
    Jul 23 12:18:49 (none) isapnp: No Plug & Play device found
    Jul 23 12:18:49 (none) Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    Jul 23 12:18:49 (none) serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 4 (level, low) -> IRQ 4
    Jul 23 12:18:49 (none) floppy0: no floppy controllers found
    Jul 23 12:18:49 (none) RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    Jul 23 12:18:49 (none) loop: loaded (max 8 devices)
    Jul 23 12:18:49 (none) PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12
    Jul 23 12:18:49 (none) i8042.c: Detected active multiplexing controller, rev 1.1.
    Jul 23 12:18:49 (none) serio: i8042 AUX0 port at 0x60,0x64 irq 12
    Jul 23 12:18:49 (none) serio: i8042 AUX1 port at 0x60,0x64 irq 12
    Jul 23 12:18:49 (none) serio: i8042 AUX2 port at 0x60,0x64 irq 12
    Jul 23 12:18:49 (none) serio: i8042 AUX3 port at 0x60,0x64 irq 12
    Jul 23 12:18:49 (none) serio: i8042 KBD port at 0x60,0x64 irq 1
    Jul 23 12:18:49 (none) mice: PS/2 mouse device common for all mice
    Jul 23 12:18:49 (none) TCP bic registered
    Jul 23 12:18:49 (none) NET: Registered protocol family 1
    Jul 23 12:18:49 (none) NET: Registered protocol family 17
    Jul 23 12:18:49 (none) Using IPI No-Shortcut mode
    Jul 23 12:18:49 (none) Suspend2 Core.
    Jul 23 12:18:49 (none) Time: tsc clocksource has been installed.
    Jul 23 12:18:49 (none) Suspend2 Compression Driver loading.
    Jul 23 12:18:49 (none) Time: acpi_pm clocksource has been installed.
    Jul 23 12:18:49 (none) Event source pit disabled
    Jul 23 12:18:49 (none) Event source lapic configured with caps set: 08
    Jul 23 12:18:49 (none) hrtimers: Switched to high resolution mode CPU 0
    Jul 23 12:18:49 (none) Suspend2 Encryption Driver loading.
    Jul 23 12:18:49 (none) Suspend2 Swap Writer loading.
    Jul 23 12:18:49 (none) Suspend2 FileWriter loading.
    Jul 23 12:18:49 (none) ACPI wakeup devices:
    Jul 23 12:18:49 (none) SMBS MODM P0P2 CBC1 USB1 USB2 USB3
    Jul 23 12:18:49 (none) ACPI: (supports S0 S3 S4 S5)
    Jul 23 12:18:49 (none) Freeing unused kernel memory: 184k freed
    Jul 23 12:18:49 (none) input: AT Translated Set 2 keyboard as /class/input/input0
    Jul 23 12:18:49 (none) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    Jul 23 12:18:49 (none) ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Jul 23 12:18:49 (none) ICH4: IDE controller at PCI slot 0000:00:1f.1
    Jul 23 12:18:49 (none) PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
    Jul 23 12:18:49 (none) PCI: setting IRQ 10 as level-triggered
    Jul 23 12:18:49 (none) ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
    Jul 23 12:18:49 (none) ICH4: chipset revision 3
    Jul 23 12:18:49 (none) ICH4: not 100% native mode: will probe irqs later
    Jul 23 12:18:49 (none) ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    Jul 23 12:18:49 (none) ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
    Jul 23 12:18:49 (none) Probing IDE interface ide0...
    Jul 23 12:18:49 (none) Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
    Jul 23 12:18:49 (none) input: SynPS/2 Synaptics TouchPad as /class/input/input1
    Then I have to press enter and the powerbutton (asus M6) a few times, and then, a line at a time a couple of messages appear, then after "udev events" has passed, boot proceeds normally.
    Jul 23 12:18:49 (none) hda: IC25N060ATMR04-0, ATA DISK drive
    Jul 23 12:18:49 (none) ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
    Jul 23 12:18:49 (none) Probing IDE interface ide1...
    Jul 23 12:18:49 (none) hdc: MATSHITADVD-RAM UJ-830S, ATAPI CD/DVD-ROM drive
    Jul 23 12:18:49 (none) ide1 at 0x170-0x177,0x376 on irq 15
    Jul 23 12:18:49 (none) hda: max request size: 512KiB
    Jul 23 12:18:49 (none) hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
    Jul 23 12:18:49 (none) hda: cache flushes supported
    Jul 23 12:18:49 (none) hda: hda1 hda2 <hda5> hda3 hda4
    Jul 23 12:18:49 (none) hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
    Jul 23 12:18:49 (none) Uniform CD-ROM driver Revision: 3.20
    Jul 23 12:18:49 (none) kjournald starting.  Commit interval 5 seconds
    Jul 23 12:18:49 (none) EXT3-fs: mounted filesystem with ordered data mode.
    Jul 23 12:18:49 (none) usbcore: registered new driver usbfs
    Jul 23 12:18:49 (none) usbcore: registered new driver hub
    Jul 23 12:18:49 (none) Initializing USB Mass Storage driver...
    Jul 23 12:18:49 (none) usbcore: registered new driver usb-storage
    Jul 23 12:18:49 (none) USB Mass Storage support registered.
    Jul 23 12:18:49 (none) Linux agpgart interface v0.101 (c) Dave Jones
    Jul 23 12:18:49 (none) fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    Jul 23 12:18:49 (none) [fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
    Jul 23 12:18:49 (none) [fglrx] module loaded - fglrx 8.26.18 [Jun 22 2006] on minor 0
    Jul 23 12:18:49 (none) usbcore: registered new driver usblp
    Jul 23 12:18:49 (none) drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
    Jul 23 12:18:49 (none) Capability LSM initialized
    Jul 23 12:18:49 (none) fuse init (API version 7.6)
    Jul 23 12:18:49 (none) input: PC Speaker as /class/input/input2
    Jul 23 12:18:49 (none) NET: Registered protocol family 23
    Jul 23 12:18:49 (none) nsc-ircc, chip->init
    Jul 23 12:18:49 (none) nsc-ircc, Found chip at base=0x02e
    Jul 23 12:18:49 (none) nsc-ircc, driver loaded (Dag Brattli)
    Jul 23 12:18:49 (none) nsc_ircc_open(), can't get iobase of 0x2f8
    Jul 23 12:18:49 (none) nsc-ircc, Found chip at base=0x02e
    Jul 23 12:18:49 (none) nsc-ircc, driver loaded (Dag Brattli)
    Jul 23 12:18:49 (none) nsc_ircc_open(), can't get iobase of 0x2f8
    Jul 23 12:18:49 (none) pnp: Device 00:07 disabled.
    I am using mkinitcpio already: /boot/grub/menu.lst:
    # (0) Arch Linux
    title  Arch Linux
    root   (hd0,2)
    kernel /vmlinuz26beyond root=/dev/hda4 ro
    initrd /kernel26beyond.img
    my /etc/mkinitcpio.conf:
    MODULES=""
    BINARIES=""
    FILES=""
    HOOKS="base udev autodetect ide filesystems"
    I tried removing scsi and sata, since my root is on an ide disk. But the problem persists.
    also recreating an image using mkinitcpio or reinstalling the kernel26beyond package using pacman doesn't help.
    Does anyone have any idea what might be wrong and how this problem might be resolved.
    It seems like a trivial issue since the systems basically works fine otherwise. However, I can't figure it out by myself, I have tried for a week.
    Any help would be greatly appreciated.

    I'm not sure if this will help you, but I suddenly was having a lot of trouble booting. My system would just freeze with a blinking cursor. I thought it had something to do with my floppy drive because if I changed the boot priority in my bios to boot from the hard disk 1st, the system would boot but would hang for a very long time in areas, and as long as 5 minutes loading uevents. I suspected this was a udev problem.
    I issued a few commands to reset udev, thinking maybe recent updates didn't take effect, which did the trick...
    # udevtrigger
    # udevcontrol reload_rules
    After that, everything is back to normal. I'm still learning about udev and I'm still fuzzy about a lot of the techy stuff.

  • Can't connect to new router...

    Hi
    I've just installed a new intranet here at my place and one of the changes is that my computer must connect to another router now. While everything works perfect in both Knoppix and windows, I can't get Arch to connect....
    I've collected all files to show you my situation (I think):
    rc.conf:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_GB.utf8"
    HARDWARECLOCK="localtime"
    TIMEZONE="Europe/Brussels"
    KEYMAP="be-latin1.map.gz"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # Scan hardware and load required modules at bootup
    MOD_AUTOLOAD="yes"
    # Module Blacklist - modules in this list will never be loaded by udev
    MOD_BLACKLIST=(pcmcia)
    # Modules to load at boot-up (in this order)
    # - prefix a module with a ! to blacklist it
    MODULES=(ath_pci fglrx powernow-k8)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    HOSTNAME="icarus"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
    # interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
    lo="lo 127.0.0.1"
    eth0="dhcp"
    INTERFACES=(lo eth0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.123.254"
    #gateway="default gw 192.168.1.1"
    ROUTES=(gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network-profiles
    #NET_PROFILES=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(@syslog-ng iptables @network !netfs @hal @crond !ifplugd @alsa @ddclient @denyhosts @sshd @mpd @powernowd)
    # End of file
    lspci -vvv section for my network card:
    02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
    Subsystem: Unknown device 1631:d008
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
    Latency: 64 (8000ns min, 16000ns max)
    Interrupt: pin A routed to IRQ 19
    Region 0: I/O ports at 8800 [size=256]
    Region 1: Memory at ff3ef400 (32-bit, non-prefetchable) [size=256]
    Expansion ROM at 50000000 [disabled] [size=64K]
    Capabilities: <access denied>
    ifconfig output:
    eth0 Link encap:Ethernet HWaddr 00:13:D3:8B:9E:89
    inet addr:192.168.123.1 Bcast:192.168.123.255 Mask:255.255.255.0
    UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
    RX packets:2 errors:0 dropped:0 overruns:0 frame:0
    TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:1000
    RX bytes:690 (690.0 b) TX bytes:994 (994.0 b)
    Interrupt:19 Base address:0x400
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:68 errors:0 dropped:0 overruns:0 frame:0
    TX packets:68 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:3998 (3.9 Kb) TX bytes:3998 (3.9 Kb)
    lsmod:
    Module Size Used by
    nls_cp437 5888 1
    vfat 10880 1
    fat 45852 1 vfat
    cpufreq_userspace 3536 1
    ipt_REJECT 3968 1
    ipt_LOG 6144 8
    nf_conntrack_ipv4 14092 6
    xt_state 2432 6
    nf_conntrack 52872 2 nf_conntrack_ipv4,xt_state
    nfnetlink 4760 2 nf_conntrack_ipv4,nf_conntrack
    xt_limit 2560 10
    xt_tcpudp 3328 22
    iptable_filter 2688 1
    iptable_mangle 2560 0
    ip_tables 10452 2 iptable_filter,iptable_mangle
    x_tables 11908 6 ipt_REJECT,ipt_LOG,xt_state,xt_limit,xt_tcpudp,ip_tables
    isofs 31040 0
    zlib_inflate 16256 1 isofs
    tda827x 6916 1
    saa7134_dvb 15884 0
    dvb_pll 12292 1 saa7134_dvb
    ohci1394 31408 0
    ieee1394 81720 1 ohci1394
    video_buf_dvb 4996 1 saa7134_dvb
    dvb_core 71976 1 video_buf_dvb
    tda1004x 15492 2 saa7134_dvb
    snd_seq_oss 29312 0
    snd_seq_midi_event 6528 1 snd_seq_oss
    snd_seq 46672 4 snd_seq_oss,snd_seq_midi_event
    snd_seq_device 6924 2 snd_seq_oss,snd_seq
    ppdev 7556 0
    lp 9348 0
    tuner 61352 0
    usb_storage 79296 1
    snd_pcm_oss 37024 0
    snd_mixer_oss 14592 1 snd_pcm_oss
    firewire_ohci 15360 0
    firewire_core 36032 1 firewire_ohci
    crc_itu_t 2304 1 firewire_core
    pcspkr 2944 0
    saa7134 119244 1 saa7134_dvb
    ppp_generic 23828 0
    slhc 5760 1 ppp_generic
    ide_core 112580 1 usb_storage
    8139cp 19584 0
    8139too 23168 0
    mii 4864 2 8139cp,8139too
    video_buf 20356 3 saa7134_dvb,video_buf_dvb,saa7134
    compat_ioctl32 1536 1 saa7134
    ir_kbd_i2c 7184 1 saa7134
    ir_common 30084 2 saa7134,ir_kbd_i2c
    videodev 26752 1 saa7134
    v4l2_common 15744 3 tuner,saa7134,videodev
    v4l1_compat 14084 2 saa7134,videodev
    parport_pc 35556 1
    parport 31304 3 ppdev,lp,parport_pc
    serio_raw 5764 0
    psmouse 35984 0
    snd_atiixp 15884 2
    snd_ac97_codec 95652 1 snd_atiixp
    ac97_bus 2432 1 snd_ac97_codec
    snd_pcm 69124 4 snd_pcm_oss,snd_atiixp,snd_ac97_codec
    snd_timer 19332 3 snd_seq,snd_pcm
    snd 45028 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_atiixp,snd_ac97_codec,snd_pcm,snd_timer
    soundcore 6496 1 snd
    snd_page_alloc 7816 2 snd_atiixp,snd_pcm
    rtc_cmos 7328 0
    rtc_core 14984 1 rtc_cmos
    rtc_lib 2944 1 rtc_core
    sg 26652 0
    k8temp 4864 0
    i2c_piix4 7948 0
    i2c_core 20352 8 tda827x,saa7134_dvb,dvb_pll,tda1004x,tuner,saa7134,ir_kbd_i2c,i2c_piix4
    ehci_hcd 30732 0
    tsdev 6720 0
    ati_agp 7308 0
    ohci_hcd 19588 0
    evdev 8192 4
    thermal 10888 0
    fan 3844 0
    button 6160 0
    battery 8324 0
    ac 4100 0
    powernow_k8 13972 0
    freq_table 3984 1 powernow_k8
    processor 24788 2 thermal,powernow_k8
    fglrx 726624 11
    agpgart 27224 2 ati_agp,fglrx
    wlan_scan_sta 12416 0
    ath_rate_sample 13312 1
    ath_pci 104744 0
    wlan 195504 4 wlan_scan_sta,ath_rate_sample,ath_pci
    ath_hal 231264 3 ath_rate_sample,ath_pci
    usbcore 112520 4 usb_storage,ehci_hcd,ohci_hcd
    ext3 119432 3
    jbd 54312 1 ext3
    mbcache 6916 1 ext3
    sr_mod 14756 0
    cdrom 34336 1 sr_mod
    sd_mod 22784 8
    pata_atiixp 5888 2
    sata_sil 8456 4
    ata_generic 5380 0
    libata 108084 3 pata_atiixp,sata_sil,ata_generic
    and dmesg output after a fresh bootup:
    Linux version 2.6.22-ARCH (root@workstation64) (gcc version 4.2.1) #1 SMP PREEMPT Fri Aug 31 19:54:09 UTC 2007
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
    BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
    BIOS-e820: 000000003ffd0000 - 000000003ffde000 (ACPI data)
    BIOS-e820: 000000003ffde000 - 0000000040000000 (ACPI NVS)
    BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
    127MB HIGHMEM available.
    896MB LOWMEM available.
    found SMP MP-table at 000ff780
    Entering add_active_range(0, 0, 262096) 0 entries of 256 used
    Zone PFN ranges:
    DMA 0 -> 4096
    Normal 4096 -> 229376
    HighMem 229376 -> 262096
    early_node_map[1] active PFN ranges
    0: 0 -> 262096
    On node 0 totalpages: 262096
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 4064 pages, LIFO batch:0
    Normal zone: 1760 pages used for memmap
    Normal zone: 223520 pages, LIFO batch:31
    HighMem zone: 255 pages used for memmap
    HighMem zone: 32465 pages, LIFO batch:7
    DMI 2.3 present.
    ACPI: RSDP 000F90C0, 0014 (r0 ACPIAM)
    ACPI: RSDT 3FFD0000, 0038 (r1 A M I OEMRSDT 7000520 MSFT 97)
    ACPI: FACP 3FFD0200, 0084 (r2 A M I OEMFACP 7000520 MSFT 97)
    ACPI: DSDT 3FFD0430, 397A (r1 0AAAA 0AAAA000 0 INTL 2002026)
    ACPI: FACS 3FFDE000, 0040
    ACPI: APIC 3FFD0390, 005C (r1 A M I OEMAPIC 7000520 MSFT 97)
    ACPI: MCFG 3FFD03F0, 003C (r1 A M I OEMMCFG 7000520 MSFT 97)
    ACPI: SSDT 3FFD3DB0, 0D6E (r1 ATI ATIPATCH 1 INTL 2002026)
    ACPI: OEMB 3FFDE040, 0056 (r1 A M I AMI_OEM 7000520 MSFT 97)
    ATI board detected. Disabling timer routing over 8254.
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    Processor #0 15:7 APIC version 16
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
    ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    Allocating PCI resources starting at 50000000 (gap: 40000000:bf780000)
    Built 1 zonelists. Total pages: 260049
    Kernel command line: root=/dev/sda1 rootfstype=ext3 ro vga=795 clock=pit
    Warning! clock= boot option is deprecated. Use clocksource=xyz
    mapped APIC to ffffd000 (fee00000)
    mapped IOAPIC to ffffc000 (fec00000)
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Detected 2189.023 MHz processor.
    Console: colour dummy device 80x25
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 1034320k/1048384k available (2393k kernel code, 13332k reserved, 783k data, 304k init, 130880k highmem)
    virtual kernel memory layout:
    fixmap : 0xfff82000 - 0xfffff000 ( 500 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
    lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
    .init : 0xc0421000 - 0xc046d000 ( 304 kB)
    .data : 0xc035641f - 0xc041a1bc ( 783 kB)
    .text : 0xc0100000 - 0xc035641f (2393 kB)
    Checking if this processor honours the WP bit even in supervisor mode... Ok.
    Calibrating delay using timer specific routine.. 4382.14 BogoMIPS (lpj=7301039)
    Security Framework v1.0.0 initialized
    Mount-cache hash table entries: 512
    CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 1024K (64 bytes/line)
    CPU: After all inits, caps: 078bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000001
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    Compat vDSO mapped to ffffe000.
    Checking 'hlt' instruction... OK.
    SMP alternatives: switching to UP code
    Freeing SMP alternatives: 11k freed
    Early unpacking initramfs... done
    ACPI: Core revision 20070126
    ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
    CPU0: AMD Athlon(tm) 64 Processor 3700+ stepping 01
    Total of 1 processors activated (4382.14 BogoMIPS).
    ENABLING IO-APIC IRQs
    ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
    ..MP-BIOS bug: 8254 timer not connected to IO-APIC
    ...trying to set up timer (IRQ0) through the 8259A ... failed.
    ...trying to set up timer as Virtual Wire IRQ... works.
    Brought up 1 CPUs
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
    PCI: Not using MMCONFIG.
    PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=2
    PCI: Using configuration type 1
    Setting up standard PCI resources
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    PCI: Probing PCI hardware (bus 00)
    PCI: Transparent bridge - 0000:00:14.4
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
    Linux Plug and Play Support v0.97 (c) Adam Belay
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp: PnP ACPI: found 15 devices
    ACPI: ACPI bus type pnp unregistered
    SCSI subsystem initialized
    PCI: Using ACPI for IRQ routing
    PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    ACPI: RTC can wake from S4
    pnp: 00:08: iomem range 0xfff80000-0xffffffff could not be reserved
    pnp: 00:0b: ioport range 0xe00-0xe7f has been reserved
    pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
    pnp: 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
    pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
    pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
    pnp: 00:0e: iomem range 0xc0000-0xcffff could not be reserved
    pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
    pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
    Time: pit clocksource has been installed.
    PCI: Bridge: 0000:00:02.0
    IO window: 7000-7fff
    MEM window: ff200000-ff2fffff
    PREFETCH window: bff00000-dfefffff
    PCI: Bridge: 0000:00:14.4
    IO window: 8000-8fff
    MEM window: ff300000-ff3fffff
    PREFETCH window: 50000000-500fffff
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
    TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    checking if image is initramfs... it is
    Freeing initrd memory: 481k freed
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: overridden by ACPI.
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.1
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    Installing knfsd (copyright (C) 1996 [email protected]).
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    Boot video device is 0000:01:00.0
    PCI: Setting latency timer of device 0000:00:02.0 to 64
    assign_interrupt_mode Found MSI capability
    Allocate Port Service[0000:00:02.0:pcie00]
    vesafb: framebuffer at 0xc0000000, mapped to 0xf8880000, using 7680k, total 262144k
    vesafb: mode is 1280x1024x24, linelength=3840, pages=67
    vesafb: protected mode interface info at c000:5977
    vesafb: pmi: set display start = c00c5a0b, set palette = c00c5a57
    vesafb: pmi: ports = 7810 7816 7854 7838 783c 785c 7800 7804 78b0 78b2 78b4
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    Console: switching to colour frame buffer device 160x64
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
    RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
    loop: module loaded
    input: Macintosh mouse button emulation as /class/input/input0
    PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    input: AT Translated Set 2 keyboard as /class/input/input1
    TCP cubic registered
    NET: Registered protocol family 1
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    Freeing unused kernel memory: 304k freed
    libata version 2.21 loaded.
    sata_sil 0000:00:11.0: version 2.2
    ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 23 (level, low) -> IRQ 16
    scsi0 : sata_sil
    scsi1 : sata_sil
    ata1: SATA max UDMA/100 cmd 0xf881ec80 ctl 0xf881ec8a bmdma 0xf881ec00 irq 16
    ata2: SATA max UDMA/100 cmd 0xf881ecc0 ctl 0xf881ecca bmdma 0xf881ec08 irq 16
    ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata1.00: ATA-7: WDC WD1600JS-00MHB1, 10.02E01, max UDMA/133
    ata1.00: 312581808 sectors, multi 16: LBA48
    ata1.00: configured for UDMA/100
    ata2: SATA link down (SStatus 0 SControl 300)
    scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-00M 10.0 PQ: 0 ANSI: 5
    ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 17
    scsi2 : sata_sil
    scsi3 : sata_sil
    ata3: SATA max UDMA/100 cmd 0xf8826880 ctl 0xf882688a bmdma 0xf8826800 irq 17
    ata4: SATA max UDMA/100 cmd 0xf88268c0 ctl 0xf88268ca bmdma 0xf8826808 irq 17
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link down (SStatus 0 SControl 300)
    ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
    PCI: Setting latency timer of device 0000:00:14.1 to 64
    scsi4 : pata_atiixp
    scsi5 : pata_atiixp
    ata5: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ff00 irq 14
    ata6: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ff08 irq 15
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
    sd 0:0:0:0: [sda] Write Protect is off
    sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 < sda5 > sda3 sda4
    sd 0:0:0:0: [sda] Attached SCSI disk
    ata5.00: ATA-6: ST3160021A, 8.01, max UDMA/100
    ata5.00: 312581808 sectors, multi 16: LBA48
    ata5.00: configured for UDMA/100
    ata6.00: ATAPI: _NEC DVD_RW ND-3530A, 2.01, max UDMA/33
    ata6.00: configured for UDMA/33
    scsi 4:0:0:0: Direct-Access ATA ST3160021A 8.01 PQ: 0 ANSI: 5
    sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
    sd 4:0:0:0: [sdb] Write Protect is off
    sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 4:0:0:0: [sdb] 312581808 512-byte hardware sectors (160042 MB)
    sd 4:0:0:0: [sdb] Write Protect is off
    sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
    sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdb: sdb1 sdb2 sdb3 sdb4
    sd 4:0:0:0: [sdb] Attached SCSI disk
    scsi 5:0:0:0: CD-ROM _NEC DVD_RW ND-3530A 2.01 PQ: 0 ANSI: 5
    sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 5:0:0:0: Attached scsi CD-ROM sr0
    kjournald starting. Commit interval 5 seconds
    EXT3-fs: mounted filesystem with ordered data mode.
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    ath_hal: module license 'Proprietary' taints kernel.
    ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133)
    wlan: 0.8.4.2 (0.9.4)
    ath_pci: 0.9.4.5 (0.9.4)
    ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 20 (level, low) -> IRQ 19
    ath_pci: switching rfkill capability off
    ath_rate_sample: 1.2 (0.9.4)
    ath_pci: switching per-packet transmit power control off
    wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
    wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    wifi0: turboG rates: 6Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
    wifi0: H/W encryption support: WEP AES AES_CCM TKIP
    wifi0: mac 7.9 phy 4.5 radio 5.6
    wifi0: Use hw queue 1 for WME_AC_BE traffic
    wifi0: Use hw queue 0 for WME_AC_BK traffic
    wifi0: Use hw queue 2 for WME_AC_VI traffic
    wifi0: Use hw queue 3 for WME_AC_VO traffic
    wifi0: Use hw queue 8 for CAB traffic
    wifi0: Use hw queue 9 for beacons
    wifi0: Atheros 5212: mem=0xff3f0000, irq=19
    Linux agpgart interface v0.102 (c) Dave Jones
    [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
    [fglrx] USWC is disabled in module parameters
    [fglrx] PAT is disabled!
    [fglrx] module loaded - fglrx 8.40.4 [Jul 31 2007] on minor 0
    ACPI: duty_cycle spans bit 4
    ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
    powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3700+ processors (version 2.00.00)
    powernow-k8: 0 : fid 0xe (2200 MHz), vid 0x6
    powernow-k8: 1 : fid 0xc (2000 MHz), vid 0x8
    powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xa
    powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
    input: Power Button (FF) as /class/input/input2
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /class/input/input3
    ACPI: Power Button (CM) [PWRB]
    ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
    ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 20
    ohci_hcd 0000:00:13.0: OHCI Host Controller
    ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
    ohci_hcd 0000:00:13.0: irq 20, io mem 0xff6fe000
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 4 ports detected
    ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 20
    ohci_hcd 0000:00:13.1: OHCI Host Controller
    ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:13.1: irq 20, io mem 0xff6fd000
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 4 ports detected
    sd 0:0:0:0: Attached scsi generic sg0 type 0
    sd 4:0:0:0: Attached scsi generic sg1 type 0
    sr 5:0:0:0: Attached scsi generic sg2 type 5
    ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 20
    ehci_hcd 0000:00:13.2: EHCI Host Controller
    ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
    ehci_hcd 0000:00:13.2: irq 20, io mem 0xff6fc000
    ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 8 ports detected
    piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
    usb 3-2: new high speed USB device using ehci_hcd and address 2
    usb 3-2: configuration #1 chosen from 1 choice
    usb 2-3: new full speed USB device using ohci_hcd and address 2
    rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month
    PPP generic driver version 2.4.2
    8139too Fast Ethernet driver 0.9.28
    ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 19
    eth0: RealTek RTL8139 at 0xf913e400, 00:13:d3:8b:9e:89, IRQ 19
    eth0: Identified 8139 chip type 'RTL-8100B/8139D'
    8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
    usb 2-3: configuration #1 chosen from 1 choice
    ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 21 (level, low) -> IRQ 21
    firewire_ohci: Added fw-ohci device 0000:02:04.0, OHCI version 1.10
    ACPI: PCI Interrupt 0000:00:14.5[b] -> GSI 17 (level, low) -> IRQ 22
    firewire_core: created new fw device fw0 (0 config rom retries)
    input: PC Speaker as /class/input/input4
    input: ImExPS/2 Logitech Wheel Mouse as /class/input/input5
    parport_pc 00:07: reported by Plug and Play ACPI
    parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
    Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
    ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    Initializing USB Mass Storage driver...
    scsi6 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    scsi7 : SCSI emulation for USB Mass Storage devices
    usb-storage: device found at 2
    usb-storage: waiting for device to settle before scanning
    usbcore: registered new interface driver usb-storage
    USB Mass Storage support registered.
    Linux video capture interface: v2.00
    saa7130/34: v4l2 driver version 0.2.14 loaded
    ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 21 (level, low) -> IRQ 21
    saa7133[0]: found at 0000:02:01.0, rev: 208, irq: 21, latency: 64, mmio: 0xff3ef800
    saa7133[0]: subsystem: 1043:4857, board: ASUSTeK P7131 Dual [card=78,autodetected]
    saa7133[0]: board init: gpio is 0
    input: saa7134 IR (ASUSTeK P7131 Dual) as /class/input/input6
    saa7133[0]: i2c eeprom 00: 43 10 57 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
    saa7133[0]: i2c eeprom 10: 00 01 20 00 ff 20 ff ff ff ff ff ff ff ff ff ff
    saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 cb ff ff ff ff
    saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 00 ff ff ff ff ff ff
    saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
    tuner 1-004b: chip found @ 0x96 (saa7133[0])
    tuner 1-004b: setting tuner address to 61
    tuner 1-004b: type set to tda8290+75a
    lp0: using parport0 (interrupt-driven).
    ppdev: user-space parallel port driver
    tuner 1-004b: setting tuner address to 61
    tuner 1-004b: type set to tda8290+75a
    saa7133[0]: registered device video0 [v4l2]
    saa7133[0]: registered device vbi0
    saa7133[0]: registered device radio0
    DVB: registering new adapter (saa7133[0]).
    DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
    tda1004x: setting up plls for 48MHz sampling clock
    scsi 6:0:0:0: Direct-Access Seagate External Drive PQ: 0 ANSI: 0
    sd 6:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
    sd 6:0:0:0: [sdc] Write Protect is off
    sd 6:0:0:0: [sdc] Mode Sense: 27 00 00 00
    sd 6:0:0:0: [sdc] Assuming drive cache: write through
    sd 6:0:0:0: [sdc] 312581808 512-byte hardware sectors (160042 MB)
    sd 6:0:0:0: [sdc] Write Protect is off
    sd 6:0:0:0: [sdc] Mode Sense: 27 00 00 00
    sd 6:0:0:0: [sdc] Assuming drive cache: write through
    sdc: sdc1
    sd 6:0:0:0: [sdc] Attached SCSI disk
    sd 6:0:0:0: Attached scsi generic sg3 type 0
    usb-storage: device scan complete
    scsi 7:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
    sd 7:0:0:0: [sdd] Attached SCSI removable disk
    sd 7:0:0:0: Attached scsi generic sg4 type 0
    scsi 7:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
    sd 7:0:0:1: [sde] Attached SCSI removable disk
    sd 7:0:0:1: Attached scsi generic sg5 type 0
    scsi 7:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
    sd 7:0:0:2: [sdf] Attached SCSI removable disk
    sd 7:0:0:2: Attached scsi generic sg6 type 0
    scsi 7:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
    sd 7:0:0:3: [sdg] Attached SCSI removable disk
    sd 7:0:0:3: Attached scsi generic sg7 type 0
    usb-storage: device scan complete
    tda1004x: found firmware revision 29 -- ok
    EXT3 FS on sda1, internal journal
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sdb4, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    kjournald starting. Commit interval 5 seconds
    EXT3 FS on sda4, internal journal
    EXT3-fs: mounted filesystem with ordered data mode.
    Adding 522072k swap on /dev/disk/by-path/pci-0000:00:11.0-scsi-0:0:0:0-part5. Priority:-1 extents:1 across:522072k
    ip_tables: (C) 2000-2006 Netfilter Core Team
    Netfilter messages via NETLINK v0.30.
    nf_conntrack version 0.5.0 (8190 buckets, 65520 max)
    eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
    Unknown InputIN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:11:6b:27:96:74:08:00 SRC=192.168.123.254 DST=255.255.255.255 LEN=331 TOS=0x00 PREC=0x00 TTL=64 ID=64771 PROTO=UDP SPT=67 DPT=68 LEN=311
    Unknown InputIN=eth0 OUT= MAC=ff:ff:ff:ff:ff:ff:00:11:6b:27:96:74:08:00 SRC=192.168.123.254 DST=255.255.255.255 LEN=331 TOS=0x00 PREC=0x00 TTL=64 ID=65027 PROTO=UDP SPT=67 DPT=68 LEN=311
    Marking TSC unstable due to: cpufreq changes.
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=48113 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=48114 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=48117 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Clocksource tsc unstable (delta = -90943342 ns)
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=7077 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=64 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=44
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.130.129 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    Unknown OutputIN= OUT=eth0 SRC=192.168.123.153 DST=195.130.129.161 LEN=75 TOS=0x00 PREC=0x00 TTL=64 ID=31572 DF PROTO=UDP SPT=32768 DPT=53 LEN=55
    My router's IP is 192.168.123.254 but if I ping that address or I try to connect to the web interface on that address to configure the router I can't get any connection...  I've also tried to specify all paramaters directly in rc.conf (eth0="eth0 192.168.123.1 netmask 255.255.255.0 broadcast 192.168.123.255") but that didn't help neither.
    I'm kind of out of ideas on how to solve this... I hope someone here will help me getting out of windows (the only OS on my pc with internet FTM).

    I'm so stupid... I should've thought about iptables... I'm reconfiguring them now, thank you very much!

Maybe you are looking for

  • Pls help me this is an urgent  requirement on  ALV GRID

    Hi all   Here i am sendig my requirement pls help me on coding .. Report Assignment For ELTPs: Selection criteria : Circle id : Select option without interval and mandatory SPR Id :  Select option without interval Project Status :  Parameter Output r

  • Does a connector from the Solo 15 to MacBook Pro exist?

    Is anyone familiar with the Solo 15 from Brunton? If so can you let me know if an appropriate connector for a MacBook Pro exist? I've been trying for years to connect my Mac to Brunton's SolarRolls without any success. Now I'm thinking of getting Bru

  • Keychain has been deleted after ipad ios upgrade

    I am using an iMac with a 3.2 GHz processor, 4 GB memory, with Mac OS X version 10.7.5. Yesterday, I connected my iPad and did the upgrade. It now appears that all the data in the keychain has been erased.  I have tried to enter the apple ID in the i

  • Problems downloading Flash Player for Wii

    I've been having trouble downloading flashplayer for my wii.  The wii's OS is Opera.... or at least what runs its internet browser.  I'm constantly getting and error 240020... I don't understand what else to do

  • Sun Access Manager Resource & password resets

    Hi, I've got IDM 7.1 and AM 7.1, with a Sun Access Manager Realm resource. The LDAP directory (DS EE 6.0) sitting behind the AM resource has been set up to "Require Password Change at First Login and After Reset". However, if a user in IDM changes th