Linux, Solaris 8-10 Software Update Library Inactive

Hello All.
In the Navigation pane , in libraries , when i open Linux, Solaris 8-10 Software Update Library , the options on the left such as Upload config file , Upload local action and others are disabled.
I cannot click on them and perform an action! How can I get them enabled ?

Hello
I have same problem. Could you help us.

Similar Messages

  • Shared Library Error after software update

    After a software update check, I downloaded all recommendations which were the following: Java for Mac OS X 10.4 Release 5, iTunes 7.1, iPhoto Update 6.0.6, Security Update 2006-008 (PPC) 1.0, and Mac OS X Update (PPC) 10.4.9.
    But upon restarting, I get 2 popup windows entitled Application Launch Failure. The first says: The application "(null)" could not be launched because of a shared library error: "5>HP Communications><CarbonLib><CFMPriv_CarbonSound>". The second reads: The application "EEventManager" could not be launched because of a shared library error: "1<EEventManager><CarbonLib><CFMPriv_CarbonSound>". I also get one when I try to launch AOL from the desktop. It also has the string with CarbonSound in it.
    I tried reinstalling all of the updates and the Security update didn't work at all - which didn't seem to matter since it was an older version (I think??). I then reinstalled the OS update again, but this time I did the combo version. Still no luck. I looked into CarbonSound, but I haven't found anything current or relevant. Any suggestions? Thank you.
    1.25 ghz ppc g4   Mac OS X (10.4.9)  

    You might want to post your question in the Mac OS X v10.4 Tiger forum.

  • Did software update. iphoto won't open "You can't open your current photo library using this version of iPhoto

    did the usual software update on my mac (older)
      Model Name:          iMac
      Model Identifier:          iMac4,1
      Processor Name:          Intel Core Duo
      Processor Speed:          2 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          2 MB
      Memory:          2 GB
      Bus Speed:          667 MHz
      Boot ROM Version:          IM41.0055.B08
      SMC Version (system):          1.1f5
      Serial Number (system):          QP6300JZU2S
      Hardware UUID:          00000000-0000-1000-8000-0016CB8A01BF
    when I open iphoto, says
    You can’t open your current photo library using this version of iPhoto. You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iPhoto.
    software is up to date.  can't even access pics. 
    can this computer run the maverick version of iphoto?

    What system and iPhoto versions  do you have currently and what versions did you have before the software update?  What did you update?
    OT

  • When i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version.  What to do?

    when i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version.  What to do?

    Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
    Troubleshooting iTunes installation on Mac OS X

  • Software Update's Library Folder

    Quick question, where is the Software Update's library folder located?
    I have several applications that still show up in Software Update that I no longer need, such as printer driver updates despite removing the drivers from my computer some time ago, as well as other previously uninstalled software. I'm aware that I can opt to hide certain updates from appearing in Software Update, but I'd rather delete the files from my system altogether. Cheers.

    The only printer drivers you should see in the SU listing are those for printers listed in the Print & Fax prefPane. Delete any not connected and you should never see updates for those again. BTW, which applications are showing up that you deleted? Dumping Apple ones is an exercise in futility and save little if any HD space. just leave them where the installer puts them.

  • HAVE BEEN UNABLE TO RETRIEVE MY OLD LIBRARY OF PHOTOS, ALBUMS AND PROJECTS SINCE DOWNLOADING AN APERTURE 3 SOFTWARE UPDATE TWO DAYS AGO.  THE NEW LIBRARY ONLY HAS A FEW NEW PHOTOS IN ONE FOLDER  PLEASE ADVISE AS HOW TO RETRIEVE OLD APERTURE LIBRARY WITH

    HAVE BEEN UNABLE TO RETRIEVE MY OLD LIBRARY OF PHOTOS, ALBUMS AND PROJECTS SINCE DOWNLOADING AN APERTURE 3 SOFTWARE UPDATE TWO DAYS AGO.  THE NEW LIBRARY ONLY HAS A FEW NEW PHOTOS IN ONE FOLDER
    PLEASE ADVISE AS HOW TO RETRIEVE OLD APERTURE LIBRARY WITH ALL MY PHOTOS, ALBUMS AND PROJECTS

    Find the old Aperture library in the Finder and double click it to launch Aperture with that library set to the default.
    And check your caps look key.  It appears to be stuck.

  • /library/server/software update - can data be deleted?

    I run OS X Server 2.2.2 on my Mac mini. I discovered that i have turned on the option software update. As i don't use my Mac mini Server for Software Update distribution i disabled this service.
    Now i discovered that in folder
         /library/server/software update
    a lot of data is still stored. I tried also to delete the software updates available still in the disabled Software Update section within server admin.
    Can i delete manuall all these software update .pkg files?

    If you are not planning to offer this Service, Once you have turned off Software Update Service, you CAN delete these items.

  • IDVD 6 - can't acess photos or movies from my library after software update

    Any Way of turning back the clock?
    i purchased the iLife '06 package and since Apple brought out their new version i can't use it.
    when opening a new product with an old theme and click on "MEDIA" button and then" Photos" it gives a message 'Open iPhoto 2 or later or Aperture 1.5 or later to see photos from your iPhoto Aperture library list.'
    Grrrrrrrr!
    Message was edited by: Bellissimojo

    The software updates since i last used iDVD '06 (about 3 months ago) were the the updates prompted automatically from the apple website triggered by the system preferences.
    The iDVD '06 software has been remained on this computer since i bought it in '06 and has been used successfully before.
    This is a recent problem and i've recently tried a maintenance program (ONYX) which did'nt cure it and then tried installing MAC OS X and bundled software from the original discs(Which archived and restored my files and desktop exactly as they were as far as i could tell?) followed by software updates.
    This has resulted in a minor change - in the "select a media source options" The audio still comes up as normal showing my itunes library,The PHOTO button still gives the greyed out message "Open iPhoto 2 or later or Aperture 1.5 or later to see photos from your iPhoto Aperture library list."
    but when i click on the MOVIES option i get a spinning beachball which makes the APP hang untill i quit it.
    Any thoughts?

  • After doing a software update for iPhoto, some of the photos in my library appear distorted and stretched. I have tried repairing the library but they are still distorted. Has anyone else experienced this and found a solution?

    After doing a software update for iPhoto, some of the photos in my library appear distorted and stretched. I have tried repairing the library, rebuliding and repairing the thumbnails but they are still distorted. Has anyone else experienced this and found a solution?

    What upgrade did you apply?  As a test launch iPhoto with the Option key held down and create a new, test library.  Import some photos and test to see if the same problem persists. Does it?
    OT

  • ITunes Library wiped out after software update - Pls help !

    I set my iMac periodically runs auto software update, and after I run iTunes 6.0.5 (20) software update, I opened iTunes and a warning message says, "Files moved to iTunes Library Damaged 1", and the library is empty !!
    On further search, when I go into HD, a folder "iTunes Library" seem to have those previous songs. Looking thru the files, it seems as though they are all the songs I lost. Can I load these songs back to the iTunes Library, which is empty right now? Or are these damaged files?
    FYI - I previously had iLife'05, but thru periodic software updates, iTunes is now version 6.0.5 (20). Is this compatible with the specs of my mac?
    Kind of mad, b/c I literally just purchased songs and did not back them up....
    Any help or advice is welcome.
    Thanks!

    The first tip is to turn off the auto update features. The Mac OS will still go look but will ask you if you wnat to install. It is usually a good idea to wait a week or so after an update see what problems others are having.
    You tunes files are ok - it is the "iTunes Library" and the "iTunes Music ....xml" that are damaged. These are data base files that work with iTunes and other programs so they know where to go look if a program needs to use something in iTunes.
    When you open iTunes the 2 noted files above will be located in HD>User>Music>iTunes. you can just "add" the tunes back into the library and it should be ok. Note that you will lose your old info such as "date added" etc.
    You can go to the Apple Store online and select the Apple Software option to see the system requirements for iLife06.
    MJ

  • In running the Software Updater, I encountered an error: "System Extension cannot be used" ... System/Library/Extensions/AppleUSBEthernetHost.kext was installed improperly and cannot be used.

    While running the Software Updater, I encountered an error: "System Extension cannot be used" ... System/Library/Extensions/AppleUSBEthernetHost.kext was installed improperly and cannot be used. Can somebody help me resolve this error message. Would this error affect my ability to run FaceTime ?

    Seems pretty clear to me. Here's what you can try:
    Open Terminal in your Utilities folder. Paste the following at the prompt:
         sudo chown -R root:wheel /System/Library/Extensions/AppleUSBEthernetHost.kext
    Press RETURN. Enter admin password when prompted. It will not be echoed so type carefully. Press RETURN again.
    Restart the computer.

  • Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

    Since my last software update, my iphoto 11 will not import any photos from any source. The circle just spins...when I go to force quit, it says iphoto not responding. Backed up iphoto library, uninstalled and reinstalled iphoto. Still not working. Help!

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Can't open iphoto library after software update

    Hello, I recently updated to iPhoto 2.0.1 and now can't open my photo library. Here's the error msg i receive when i open the app: "You can't open your current photo library using this version of iPhoto. You have made changes to your photo library using a newer version of iPhoto. Please quit and use the latest version of iphoto."
    I only have 1 version of iphoto on my hd.
    Thanks!!
    Molly

    I only assumed the trouble stemmed from an auto software update. But when you say "a photo CD recently acquired" do you mean any CD with photos on it? I get a few of those a week in my line of work and have never had a problem before. Could a CD of images have corrupted my application?
    Also, I just got a new HD onto which all of my data was transferred, could this have precipitated the problem?
    This indeed is the something I was not telling you.
    Do let me know Brie Fly.
    Thank you.

  • Can I delete the iPhone & iPod software updates in my Library folder?

    Under "iTunes" in my home "Library" folder, there is almost a Gig's worth of software updates for the iPhone and the iPod. Can I safely delete these? After all, the updates have been installed on my devices already. I'm surprised they're not automatically deleted, actually.

    The easiest way will be to search VersionTracker for "iPod". You'll find a number of utilities that can transfer your tracks and your playlists from your iPod to your PC.
    It's also possible to do this manually, but the procedure is rather involved. If you're interested, though, see this thread:
    MacMuse: Computer crashed

  • BOBJ DATA INTEGRATOR XI R2 ACCELERATED FOR LINUX/SOLARIS software

    Hi All,
    I want to download BODI software for Linux/Solaris platfom but I can't find it.
    Please help me.
    Thanks & Best Regards.

    Hello,
    DI XI Rel.2 is out of Support and you cant download it anymore. I would recommend you migrate to Data Services XI 3.2 or attend the Ramp- Up for Data Services 4.0
    Maybe you contact your SAP Sales Rep. for both steps.
    Regards
    -Seb.

Maybe you are looking for

  • Site to Site VPN Setup: Error processing payload: Payload ID: 1

    Hello, I am currently getting the error Error processing payload: Payload ID: 1 when attempting to connect an old RV082 (local) to an ASA5520 (in lab). I'm not really sure what is causing this, going through what I've found via Google hasn't really h

  • How Can I get my JayBird Freedom Bluetooth Earbud Headset to Work with my MacBook Pro-Retina

    I have a 1st gen iPad and a relatively new MacBook Pro 15 Retina.  As well, I also have a Jaybird Freedom Bluetooth Earbud Headset (Mic/Stereo Speakers).  Finally, I have a Droid X (I'll explain in a minute why I mention this). My BT Earbuds can pair

  • Changing PO date to Actual GI date in Delivery from SALES ORDER(VA01)

    THe Actual Requirement is...Whenever I create a SALES Order with PO date this PO date should automatically trigger in Actual GI date field in Delivery. I just want to share my solution before I get some help from you Guys.. I have actually used a use

  • BELGIAN DOWN PAYMENT REQUEST --Need a feedback experience

    Hi all, The case concerns the down payment request in a belgian company code: 1/ The process begins with the posting of a FAZ document type from SD module (through transaction VF01) => Therefore a down payment request is posted in FI with special G/L

  • Create and Send  Bid Invitation

    Hello, Newbie here, so thanks in advance for any help. We are in design phase and trying to figure out what's feasible or not.  We want to automatically create a bid (RFQ) from an approved SC item.   We then want to send this bid (RFQ) to our middlew