Linux TestDrive SAP NetWeaver 7.02 connection issue

Hi,
The demo URL 192.168.234.42:8042/sap/opu/sdata/IWFND/RMTSAMPLEFLIGHT/?sap-client=001&$format=xml is working fine in my linux vmware, but on my PC directly, it gives connection time out.
The port 8042 is open, the firewall is not running.
Anybody has any idea?
I can ping NPLHOST on my PC, but if I use the above port (or any other port), I don't get a connection.
Thanks,
Tamas

If ping NPLHOST is successful...is it resolving to the same IP address 192.168.234.42 or any other IP address
Did you make correct entries in each system's host files and tried?

Similar Messages

  • Linux Testdrive SAP NetWeaver 7.02 on DB2 LUW now available in SAP Shop

    You can find the DB6 based NW7.02 (SP09) Testdrive in www.sap.com/shop -> Knowledge Shop -> Documentation -> SAP NetWeaver -> SAP NetWeaver, material number is 50108304. Don't let yourself get fooled by the currently misleading description, 50108304 is the DB2 LUW based version. I will have that corrected. If you don't have a 64bit Linux system,  you can download SLES11 VM at http://download.novell.com/Download?buildid=x1e9uCQ4074~ run the virtual machine, e. g., with VMware Player.
    Have fun
    Manfred

    Hi Ulysees
    Thanks for letting me know. I take care that Suse will provide the users.txt file, still a bit reluctant to post the info directly in this thread. But some colleagues did that work for me, you can check http://www.sdn.sap.com/irj/scn/downloads?rid=/library/uuid/40cc99a8-c0d0-2e10-4d83-c5aad873599f for an instruction. There is a detailed How-To available on this page, which hast the root user passsword on page 10.
    Manfred
    Edited by: Manfred Stein on Jan 16, 2012 1:25 PM
    Edited by: Manfred Stein on Jan 16, 2012 1:29 PM

  • Linux TestDrive SAP NetWeaver 7.02 MaxDB available in SAP Shop

    We have just released a fresh version of our NetWeaver testdrive. Testdrive of NetWeaver 7.02 SPS7 is MaxDB based and can be ordered free of charge in SAP Knowledge Shop (www.sap.com/shop -> Knowledge Shop -> Documentation > SAP NetWeaver > SAP NetWeaver), material number is 50105321. A DB2 LUW version will follow within the next few weeks, we also work on a download version. We have tested with SLES10 and SLES11, RHEL6 and Ubuntu 10.10. Suse will provide a custom made SLES11 SP1 based virtual appliance with sufficient diskspace to home the testdrive. We have worked on a couple of simplifications to make the installation process even simpler than it was before.
    We await your feedback
    Manfred

    Hi Manfred,
    you mentioned, that SUSE would provide a custom made vmware image of SLES 11 SP1 to be used with this preview edition. Are there any news on wether and when this will be available ?
    regards,
    Jakob

  • Xcelsius 2008 SP3 and SAP Netweaver 7.01 Connection

    Hello everyone,
    Im getting the next spanish error "El sistema al que está conectado en estos momentos no es BW 7.02 ni posterior. Desconéctese y elija otro sistema.". Just when im trying to connect xcelsius 2008 and sap netweaver 7.01. I get this error when i try to set a SAP Netweaver BW Connection.
    My configuration is like this:
    Server Side:
    Windows Server Enterprise 2008 SP1 64 bits
    BusinessObjects Enterprise XI 3.1 SP2 FixPack 4
    Java Connector (Jco): 2.1.8 32 bits
    Integration Kit for SAP BusinessObjects XI 3.1 SP2 FixPack 4
    SAP GUI 710 Patch Level 14
    Client Side:
    OS: Windows 7
    Xcelsius Designer 2008
    Thanks a lot to everyone
    ramonms

    Ashish thanks for your reply,
    im not using a live office connection, my problem is from xcelsius directly.
    I try to connect using the sap native client (SAP LOGON APPLICATION) and i have no problem, it works fine.
    in the client side i also have installed SAP GUI 710 patch level 11 but also i tested with level patch 14
    thanks
    ramonms

  • Problem - NSP - SAP NetWeaver 7.0 - connection

    Hi All,
    I have installed SAP NetWeaver 7.0  abap trial version, installation went well, but unable to connect , getting the following probleem
    partner '127.0.0.1:sapdp00' not reached'
    some one please let me know how to solve it.
    Thanks
    jag

    Hi Vincent,
    I dont see Dev_disp but have dev_ms in - C:\SAP\NSP\DVEBMGS00\work and have other files like instsat, stderr0, stderr1, stderr2, sapstartlog.
    following note from dev_ms
    trc file: "dev_ms", trc level: 1, release: "700"
    Wed Jan 23 17:25:27 2008
    MsSSetTrcLog: trc logging active, max size = 20971520 bytes
    systemid   560 (PC with Windows NT)
    relno      7000
    patchlevel 0
    patchno    94
    intno      20050900
    make:      multithreaded, ASCII, optimized
    pid        7080
    ***LOG Q01=> MsSInit, MSStart (Msg Server 1 7080) [msxxserv.c   1824]
    MsInitAclInfo: acl file C:\SAP\NSP\SYS\global\ms_acl_info.DAT not found, unrestricted access
    MsGetOwnIpAddr: my host addresses are :
       1 : [9.xx.xx.xxx] xxx-xxxxxxxx22.xxx.com (HOSTNAME)
       2 : [xxx.0.0.1] localhost (LOCALHOST)
       3 : [xxx.xxx.1.xxx] IBM-xxxxxxxxx22.xxxx.ca.comcast.net. (NILIST)
    Wed Jan 23 17:25:28 2008
    MsHttpInit: full qualified hostname = xxx-xxxxxxxxx22.xxx.com
    HTTP logging is switch off
    set HTTP state to LISTEN
    MsHttpOwnDomain: own domain[1] = xxx.com
    ms/icf_info_server : deleted
    I listen to port sapmsNSP (3600) ***
    I listen to internal port 3900 (3900) ***
    HTTP port 8100 state LISTEN ***
    CUSTOMER KEY: >xxxxxxxx883<
    please let me know if any other info is needed.
    Thanks

  • Sap netweaver 7.01 installation issue

    Hi ,
    I installed sap netweaver 7.01 , I used to uninstall it and delete some folder manually because the installation was failed.
    I tried to install it again , but it doesn't install SAPDB folder , this part is skipped , it only install (sap folder) app server wich is about 350 Mo , the total should be about 20 Go !!!
    Plz help ...

    I created "sapdb" folder , and the installation goes correctly , but it ends with an error message ,
    here is what the log file shows , plz help :
    (Jan 17, 2009 7:55:10 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Jan 17, 2009 7:55:10 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Jan 17, 2009 7:55:20 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Jan 17, 2009 7:55:20 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Jan 17, 2009 7:55:30 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Jan 17, 2009 7:55:30 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Jan 17, 2009 7:55:40 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Jan 17, 2009 7:55:40 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Jan 17, 2009 7:55:50 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Jan 17, 2009 7:55:50 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Jan 17, 2009 7:56:00 PM), Install, com.sap.installshield.CheckServicesAction, err, CheckServicesAction(bean17): Expected service (SAPNSP_00) is not currently running
    (Jan 17, 2009 7:56:00 PM), Install, com.sap.installshield.CheckServicesAction, wrn, CheckServicesAction(bean17): Service SAPNSP_00 is not available, retry after 10 s.
    (Jan 17, 2009 7:56:10 PM), Install, com.sap.installshield.CheckServicesAction, err, An error occurred and product installation failed.  Look at the log file d:\SAP\NSP\log.txt for details.
    (Jan 17, 2009 7:56:10 PM), Install, com.sap.installshield.CheckServicesAction, err, ProductException: (error code = 601; message="Services failed to start (see the log for details)")
    STACK_TRACE: 12
    ProductException: (error code = 601; message="Services failed to start (see the log for details)")
         at com.sap.installshield.CheckServicesAction.install(CheckServicesAction.java:95)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    (Jan 17, 2009 7:56:12 PM), Install, com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct, err, An error occurred and product uninstallation failed.  Look at the log file d:\SAP\NSP\log.txt for details.
    (Jan 17, 2009 7:56:12 PM), Install, com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles, err, ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
    STACK_TRACE: 15
    ProductException: (error code = 200; message="Java error"; exception = [java.lang.Exception])
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.execute(StepWrapperInstallFiles.java:254)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllSteps(StepWrapperInstallFiles.java:224)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.executeAllUninstallationSteps(StepWrapperInstallFiles.java:192)
         at com.sap.installshield.sdcstepswrapper.StepWrapperInstallFiles.uninstall(StepWrapperInstallFiles.java:313)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.uninstallProductAction(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.processActionsFailed(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(Unknown Source)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(Unknown Source)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(Unknown Source)
         at com.installshield.wizard.service.AsynchronousOperation.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)

  • SAP Netweaver Developer Studio Version Issue

    Dear All,
    We need a clarification on SAP NWDS version to be installed on client machine.
    We have standalone SAP NW 7.3 (Enterprise Portal) server. Its SP level is sp00.
    To develop and deploy portal applications, Which NWDS version we need to use.
    We have the[ LINK|https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/nw/730/doc/auto_com.sap.netweaver.developerstudio.distribution.complete.extsoa_versions.html] to download NWDS
    Please let us know which NWDS version we need to download.
    We have SAP (NW 7.3 SP 00) EP Server. Can we use NWDS 7.3 SP02 to develop and deploy portal applications?
    Can we have NWDS version higher than NW server?

    Hello,
    we are using NWDI (with the SCA corresponding tio the respective server versions) for development.
    Can we use NWDS 7.3 for development of NW7.0 applications (=NWDS version is equal or higher) or do we need to use a developer studio with version corresponding exactly to the servers version?
    Regards,
    Manuel

  • Problems deploying with SDM on SAP Netweaver Testdrive on Linux

    Hello,
    I tried to deploy the System Analyzer (see SAP-Note 770702) for NW 04 on the SAP Netweaver Testdrive on Linux (Technology Preview SAP NetWeaver 04 - SAP Web Application Server on Linux and MaxDB).
    When I try to deploy it with the RemoteGui, the GUI hangs after the step 2 ('show deployment proposals for SCAs/SDA's to be deployed'). There is no error in the logfiles.
    When I try to deploy it on the command line (standalone modus), I get the following error:
    >>>
    Caught Exception: java.lang.NullPointerException
    java.lang.NullPointerException
            at com.sap.sdm.serverext.sdmprovided.DeplParamVarSubstProcessorImpl.doSubstitution(DeplParamVarSubstProcessorImpl.java:238)
            at com.sap.sdm.serverext.sdmprovided.DeplParamVarSubstProcessorImpl.findSubstitution(DeplParamVarSubstProcessorImpl.java:75)
            at com.sap.sdm.serverext.servertype.fs.cpo.CPOFSJavaFileSet.<init>(CPOFSJavaFileSet.java:58)
            at com.sap.sdm.serverext.servertype.fs.cpo.CPOFSJavaFileSets.<init>(CPOFSJavaFileSets.java:41)
            at com.sap.sdm.serverext.servertype.fs.cpo.CPOFSJavaFactory.createNewFileSets(CPOFSJavaFactory.java:24)
            at com.sap.sdm.serverext.servertype.fs.FSJavaDeploymentActionProcessor.<init>(FSJavaDeploymentActionProcessor.java:87)
            at com.sap.sdm.serverext.servertype.fs.FSJavaDeploymentActionHandler.createDeploymentActionProcessor(FSJavaDeploymentActionHandler.java:25)
            at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.createDeploymentActionProcessor(PhysicalDeploymentActionExecutor.java:104)
            at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.createDeploymentActionProcessor(DeploymentActionImpl.java:102)
            at com.sap.sdm.app.proc.deployment.states.StateRequestTargets.processEvent(StateRequestTargets.java:69)
            at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
            at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
            at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.processStartInstallation(DeployerImpl.java:168)
            at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:80)
            at com.sap.sdm.control.command.cmds.Deploy.execute(Deploy.java:182)
            at com.sap.sdm.control.command.decorator.AssureStandaloneMode.execute(AssureStandaloneMode.java:53)
            at com.sap.sdm.control.command.decorator.AssureOneRunningSDMOnly.execute(AssureOneRunningSDMOnly.java:61)
            at com.sap.sdm.control.command.decorator.SDMInitializer.execute(SDMInitializer.java:52)
            at com.sap.sdm.control.command.decorator.GlobalParamEvaluator.execute(GlobalParamEvaluator.java:60)
            at com.sap.sdm.control.command.decorator.AbstractLibDirSetter.execute(AbstractLibDirSetter.java:46)
            at com.sap.sdm.control.command.decorator.ExitPostProcessor.execute(ExitPostProcessor.java:48)
            at com.sap.sdm.control.command.decorator.CommandNameLogger.execute(CommandNameLogger.java:49)
            at com.sap.sdm.control.command.decorator.AdditionalLogFileSetter.execute(AdditionalLogFileSetter.java:65)
            at com.sap.sdm.control.command.decorator.AbstractLogDirSetter.execute(AbstractLogDirSetter.java:54)
            at com.sap.sdm.control.command.decorator.SyntaxChecker.execute(SyntaxChecker.java:37)
            at com.sap.sdm.control.command.Command.exec(Command.java:42)
            at SDM.main(SDM.java:21)
    Severe (internal) error. Return code: 16
    <<<
    Any ideas?
    Thank's a lot
    Peter

    Hi Peter,
    Testdrive is a manipulated version that may miss some parts. It is definitely not intended for installing any additional SAP software nor tools on it.
    Regards,
    Benny

  • SAP Netweaver 7.0 installation - serious issue (startsap db n4sadm)

    Hi,
    We are trying to setup SAP Netweaver 7.0 (Test Drive x-86 edition) on Fedora 12. We have successfully ran the "install.sh" file. The DB2 instance gets installed and we are able to start it as 'db2n4s' user using the 'db2start' command (we could as well stop using db2stop).
    But, we are facing issues when we start the db2 instance as prescribed by the SAP Netweaver installation guide for the following command.
    n4shost:n4sadm 52> startsap db n4shost
    Checking db6 db Database
    ABAP Database is not available via R3trans
    Starting SAP-Collector Daemon
    expand: write error: Broken pipe
    expand: write error
    * This is Saposcol Version COLL 20.94 700 - v2.00, Intel x86 with Linux, 2007/02/16
    * Usage:  saposcol -l: Start OS Collector
    *         saposcol -k: Stop  OS Collector
    *         saposcol -d: OS Collector Dialog Mode
    *         saposcol -s: OS Collector Status
    * Starting collector (create new process)
    saposcol on host pwc01 started
    Running /usr/sap/N4S/SYS/exe/run/startdb
    SQL1042C  An unexpected system error occurred.  SQLSTATE=58004
    Activate database failed
    R3trans connect failed
    DB startup failed
    Details of our DB2 instance
    [db2n4s@]$ ./db2licm -l
    Product name:                     "DB2 Enterprise Server Edition"
    License type:                     "CPU"
    Expiry date:                      "Permanent"
    Product identifier:               "db2ese"
    Version information:              "9.1"
    Annotation:                       "-3;(_c)"
    Features:
    DB2 Database Partitioning:        "Licensed"
    DB2 Performance Optimization ESE: "Not licensed"
    DB2 Storage Optimization:         "Licensed"
    DB2 Advanced Access Control:      "Not licensed"
    DB2 Geodetic Data Management:     "Not licensed"
    Homogeneous Federation for DB2:   "Licensed"
    DB2 Pure XML ESE:                 "Not licensed"
    Thanks,
    Sriram

    Thanks for your quick reply.
    I actually went ahead one step in the problem. Now i am getting the following message when i try to start the sap.
    n4shost:n4sadm 55> startsap db n4shost
    Warning: Could not found virtuell host in ifconfig list
    Checking db6 db Database
    ABAP Database is not available via R3trans
    Starting SAP-Collector Daemon
    expand: write error: Broken pipe
    expand: write error
    * This is Saposcol Version COLL 20.94 700 - v2.00, Intel x86 with Linux, 2007/02/16
    * Usage:  saposcol -l: Start OS Collector
    *         saposcol -k: Stop  OS Collector
    *         saposcol -d: OS Collector Dialog Mode
    *         saposcol -s: OS Collector Status
    * Starting collector (create new process)
    saposcol on host pwc01 started
    Running /usr/sap/N4S/SYS/exe/run/startdb
    11/10/2010 14:17:12     0   0   SQL1063N  DB2START processing was successful.
    SQL1063N  DB2START processing was successful.
    Database activated
    R3trans connect failed
    DB startup failed
    Also i did the R3trans -d and have attached the log.
    4 ETW000 R3trans version 6.14 (release 700 - 11.04.07 - 14:28:00).
    4 ETW000 unicode enabled version
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 10.11.2010 - 14:19:38
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Wed Nov 10 14:19:38 2010                              83  0.000083
    4 ETW000  [dev trc     ,00000]  db_con_init called                                    21  0.000104
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                             29  0.000133
    4 ETW000  [dev trc     ,00000]  Loading DB library '/usr/sap/N4S/SYS/exe/run/dbdb6slib.so' ...
    4 ETW000                                                                              35  0.000168
    4 ETW000  [dev trc     ,00000]  load shared library (/usr/sap/N4S/SYS/exe/run/dbdb6slib.so), hdl 0
    4 ETW000                                                                             191  0.000359
    4 ETW000  [dev trc     ,00000]  Library '/usr/sap/N4S/SYS/exe/run/dbdb6slib.so' loaded
    4 ETW000                                                                              21  0.000380
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library /usr/sap/N4S/SYS/exe/run/dbdb6slib.so
    4 ETW000                                                                              27  0.000407
    4 ETW000  [dev trc     ,00000]  Version of '/usr/sap/N4S/SYS/exe/run/dbdb6slib.so' is "700.08", patchlevel (0.107)
    4 ETW000                                                                              85  0.000492
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library /usr/sap/N4S/SYS/exe/run/dbdb6slib.so
    4 ETW000                                                                              24  0.000516
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library /usr/sap/N4S/SYS/exe/run/dbdb6slib.so
    4 ETW000                                                                              27  0.000543
    4 ETW000  [dev trc     ,00000]  New connection 0 created                              18  0.000561
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              27  0.000588
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         20  0.000608
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              21  0.000629
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              25  0.000654
    4 ETW000  [dev trc     ,00000]  DB2 library successfully loaded DB2 library '/db2/db2n4s/sqllib/lib32/libdb2.so' successfully loaded
    4 ETW000                                                                            7545  0.008199
    4 ETW000  [dev trc     ,00000]  RLIMIT_STACK: current=10485760, max=0                 40  0.008239
    4 ETW000  [dev trc     ,00000]  DB6 (DB2 UDB) UNICODE database interface 700.08 [opt]
    4 ETW000                                                                              23  0.008262
    4 ETW000  [dev trc     ,00000]  DB6 shared library (dbdb6slib) patchlevels            15  0.008277
    4 ETW000  [dev trc     ,00000]    (0.8) DB6: V8.2.2 optguidelines in OPEN SQL (note 150037)
    4 ETW000                                                                              22  0.008299
    4 ETW000  [dev trc     ,00000]    (0.8) Support of SDBUPDEXCL (note 847616)           14  0.008313
    4 ETW000  [dev trc     ,00000]    (0.9) DB6: use export file for dbdb6slib (note 835135)
    4 ETW000                                                                              21  0.008334
    4 ETW000  [dev trc     ,00000]    (0.9) DB6: Core in getAndBindSQLDA (note 833183)
    4 ETW000                                                                              30  0.008364
    4 ETW000  [dev trc     ,00000]    (0.10) DB6: link dbdb6slib.dll on windows with libdb6.obj (note 761159)
    4 ETW000                                                                              22  0.008386
    4 ETW000  [dev trc     ,00000]    (0.10) DB6: DUPLICATE_KEY on MERGE -> repeat (note 851474)
    4 ETW000                                                                              21  0.008407
    4 ETW000  [dev trc     ,00000]    (0.15) DB6: wrong CAST for short string ABAP type (note 861905)
    4 ETW000                                                                              22  0.008429
    4 ETW000  [dev trc     ,00000]    (0.17) DB6: special characters in sidadm passwd (note 865839)
    4 ETW000                                                                              21  0.008450
    4 ETW000  [dev trc     ,00000]    (0.21) DB6: no SAP_INFO comments (note 873889)
    4 ETW000                                                                              22  0.008472
    4 ETW000  [dev trc     ,00000]    (0.22) DB6: hints: get correlation names from view texts (note 868888)
    4 ETW000                                                                              20  0.008492
    4 ETW000  [dev trc     ,00000]    (0.23) DB6: hints: get correlation names from view texts (note 868888)
    4 ETW000                                                                              22  0.008514
    4 ETW000  [dev trc     ,00000]    (0.26) DB6: DB6_DBSL_CLP_COMMAND STRING_BAD_REF (note 883402)
    4 ETW000                                                                              22  0.008536
    4 ETW000  [dev trc     ,00000]    (0.27) DB6: activate value compression (note 886231)
    4 ETW000                                                                              20  0.008556
    4 ETW000  [dev trc     ,00000]    (0.28) DB6: optimization guidelines on views part 2 (note 868888)
    4 ETW000                                                                              22  0.008578
    4 ETW000  [dev trc     ,00000]    (0.30) DB6: no SQL trace for SQLCancel (note 892111)
    4 ETW000                                                                              21  0.008599
    4 ETW000  [dev trc     ,00000]    (0.33) DB6: append SAP_TA comment (note 873889)
    4 ETW000                                                                              22  0.008621
    4 ETW000  [dev trc     ,00000]    (0.34) DB6: activate value compression with quoted names (note 886231)
    4 ETW000                                                                              21  0.008642
    4 ETW000  [dev trc     ,00000]    (0.36) DB6: Repeat isolated DDL statements after SQL0911 (note 901338)
    4 ETW000                                                                              22  0.008664
    4 ETW000  [dev trc     ,00000]    (0.41) DB6: add V9 to list of supported DB2 releases (note 912386)
    4 ETW000                                                                              23  0.008687
    4 ETW000  [dev trc     ,00000]    (0.50) DB6: reread passwords for secondary connections (note 931742)
    4 ETW000                                                                              22  0.008709
    4 ETW000  [dev trc     ,00000]    (0.52) DB6: double quote table names in optguidelines (note 868888)
    4 ETW000                                                                              33  0.008742
    4 ETW000  [dev trc     ,00000]    (0.54) DB6: error handling in DBSL CLP (note 940260)
    4 ETW000                                                                              22  0.008764
    4 ETW000  [dev trc     ,00000]    (0.69) DB6: technical support of DB2 CLI driver (note 962892)
    4 ETW000                                                                              23  0.008787
    4 ETW000  [dev trc     ,00000]    (0.73) DB6: log table name on TRUNCATE failure (note 970743)
    4 ETW000                                                                              22  0.008809
    4 ETW000  [dev trc     ,00000]    (0.79) DB6: column type XML in index size calculation (note 982993)
    4 ETW000                                                                              27  0.008836
    4 ETW000  [dev trc     ,00000]    (0.82) DB6: CAST for SSTRING data types (note 989568)
    4 ETW000                                                                              21  0.008857
    4 ETW000  [dev trc     ,00000]    (0.86) DB6: long runtimes for R3szchk (note 1000847)
    4 ETW000                                                                              22  0.008879
    4 ETW000  [dev trc     ,00000]    (0.88) DB6: patch collection Dec 06 (note 1005574)
    4 ETW000                                                                              22  0.008901
    4 ETW000  [dev trc     ,00000]    (0.96) DB6: patch collection Jan 07 (note 1017852)
    4 ETW000                                                                              22  0.008923
    4 ETW000  [dev trc     ,00000]    (0.97) DB6: CLP commands with DB2 CLI Driver (note 1024102)
    4 ETW000                                                                              21  0.008944
    4 ETW000  [dev trc     ,00000]    (0.99) DB6: SUBSTITUTE VALUES with FAE statements (note 1028779)
    4 ETW000                                                                              21  0.008965
    4 ETW000  [dev trc     ,00000]    (0.107) DB6: patch collection Apr 07 (note 1047194)
    4 ETW000                                                                              31  0.008996
    4 ETW000  [dev trc     ,00000]  Supported features:                                   16  0.009012
    4 ETW000  [dev trc     ,00000]  ..retrieving configuration parameters                 19  0.009031
    4 ETW000  [dev trc     ,00000]  ..done                                                70  0.009101
    4 ETW000  [dev trc     ,00000]  Running with UTF-8 Unicode                            15  0.009116
    4 ETW000  [dev trc     ,00000]  *** ERROR in DB6Connect[dbdb6.c, 1634] CON = 0 (BEGIN)
    4 ETW000                                                                           31472  0.040588
    4 ETW000  [dev trc     ,00000]  &+     DbSlConnectDB6( SQLConnect ): [IBM][CLI Driver] SQL30082N  Security processing failed with reason "15" ("PROCESSIN
    4 ETW000                                                                              25  0.040613
    4 ETW000  [dev trc     ,00000]  &+     G FAILURE").  SQLSTATE=08001                                                                               
    4 ETW000                                                                              23  0.040636
    4 ETW000  [dev trc     ,00000]  &+                                                                               
    4 ETW000                                                                              25  0.040661
    4 ETW000  [dev trc     ,00000]  &+                                                                               
    4 ETW000                                                                              24  0.040685
    4 ETW000  [dev trc     ,00000]  &+                                                                               
    4 ETW000                                                                              22  0.040707
    4 ETW000  [dev trc     ,00000]  *** ERROR in DB6Connect[dbdb6.c, 1634] (END)          26  0.040733
    4 ETW000  [dbdb6.c     ,00000]  *** ERROR => DbSlConnect to 'N4S' as 'sapn4s' failed
    4 ETW000                                                                              60  0.040793
    2EETW169 no connect possible: "DBMS = DB6                              --- DB2DBDFT = 'N4S'"
    Thanks,
    Sriram

  • SAP NetWeaver 7.01 ABAP Trial Version on Vista Ultimate Issue

    Hi,
    I am trying to install SAP NetWeaver 7.01 ABAP Trial Version on windows vista ultimate 32 bit. when i check MaxDBSAPNWPREV.log
    Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst: starting installation phase of package SQLDBC 77 7.7.04.23 32 bit
    Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst: -----------------------------------------------------------------
    Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst:
    Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst: start real extraction of "C:/sapdb/NSP/_tempLocation/SQLDBC77.TGZ"
    Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-09 06:04:44 pgm/
    Tue Mar 17 08:30:19 GMT 2009 MaxDB sdbinst: extracting: -rwxr-xr-x       655360 2008-07-09 04:24:09 pgm/libSDBLoader77.dll
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: -rwxr-xr-x      1642496 2008-07-09 04:24:03 pgm/libSQLDBC77.dll
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-09 06:04:44 sdk/
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-09 06:04:44 sdk/fastload/
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-09 06:04:44 sdk/fastload/lib/
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: -rw-r--r--        23124 2008-07-09 04:24:09 sdk/fastload/lib/libSDBLoader77.lib
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-09 06:04:44 sdk/sqldbc/
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-09 06:04:44 sdk/sqldbc/lib/
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: -rw-r--r--       146580 2008-07-08 23:51:15 sdk/sqldbc/lib/libSQLDBC77.lib
    Tue Mar 17 08:30:20 GMT 2009 MaxDB sdbinst: extracting: drwxr-xr-x            0 2008-07-09 06:04:44 symbols/
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: extracting: -rw-r--r--      4041728 2008-07-09 04:24:08 symbols/libSDBLoader77.pdb
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: extracting: -rw-r--r--      7539712 2008-07-09 04:24:02 symbols/libSQLDBC77.pdb
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: checking unpacked archive... ok
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: installation of MaxDB Software finished successfully Tu, Mar 17, 2009 at 14:00:20
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: creating database NSP...
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: getInstalledReleasesWin(): wrong version format
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: ERROR: Backup check for  'C:\sapdb\NSP\_tempLocation\load\load_datasave' failed:
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: File not found: C:\sapdb\NSP\_tempLocation\load\load_datasave
    Tue Mar 17 08:30:21 GMT 2009 MaxDB sdbinst: installation exited abnormally  at Tu, Mar 17, 2009 at 14:00:20
    Tue Mar 17 08:30:22 GMT 2009 MaxDB: Error during call to sdbinst, rc= 1
    Tue Mar 17 08:30:22 GMT 2009 MaxDB: Done with call_sdbinst
    Tue Mar 17 08:30:22 GMT 2009 MaxDB: rc of sdbinst = 1
    Tue Mar 17 08:30:22 GMT 2009 MaxDB: Start of CallSdbuninst
    Tue Mar 17 08:30:22 GMT 2009 MaxDB: IndepProgPath: C:/sapdb/programs
    Tue Mar 17 08:30:22 GMT 2009 MaxDB: dbmcli path: C:/sapdb/programs/pgm/dbmcli.exe
    Tue Mar 17 08:30:22 GMT 2009 MaxDB: Calling check for db_enum in case of an abort
    Tue Mar 17 08:30:25 GMT 2009 MaxDB: nsp doesn't exist. Nothing to do !
    Tue Mar 17 08:30:25 GMT 2009 MaxDB: rc of Method: 3
    Tue Mar 17 08:30:25 GMT 2009 MaxDB: IndepProgPath = C:/sapdb/programs
    MaxDB: dbmcli_path = C:/sapdb/programs/pgm/dbmcli.exe
    MaxDB: Database instance to drop: :NSP:
    MaxDB: Instroot of NSP is: null
    MaxDB: sdbuninst_option = :3
    MaxDB: 0=uninstall all, 1=uninstall Kernel package, 2=drop database only, 3=do nothing
    Tue Mar 17 08:30:25 GMT 2009 MaxDB: End of CallSdbuninst
    Tue Mar 17 08:30:25 GMT 2009 MaxDB: End of uninstallation
    What could be the issue
    as the error says File not found: C:\sapdb\NSP\_tempLocation\load\load_datasave
    i am not able to find the folder in my system.
    Regards

    Hello every body... i´m facing with the same problem and i thinank i´ve just tried everything with no success... 2 days ago i installed ABAP Trial without problems, everything works fine and yesterday i was able to login and practice a little bit. At the end of the day i run the tc SGEN to compile the system and when the jobs ended i shutdown the db and the computer.
    This morning i´m not able to stats the db, it´s impossible... i´ve just tried many things that i´ve seen in different post but the error still appears... any idea ? please help me... it´s very important for me to have the ABAP Trial working.
    System
    Windows XP Pro SP2.
    HD 100GB.
    Here is my dbm file (...the end of the file to see the error).
    My user is assigned to SDB Operators.
    If i try to start the service manually the system says that service it has been started and stopped because there is nothing to do... any idea ?
    Thanks in advance
    Joaquin Casas
    2009-04-11 12:52:24 0x00000e88 INF          1 DBMSrvCo A DBM Server client connection was established at 2009-04-11 12:52:24 (client process has process ID 3456 on computer sapquim).
    2009-04-11 12:52:24 0x00000e88 INF        283 DBMSrv   Command 'db_online' is being executed.
    2009-04-11 12:52:27 0x00000e88 INF          1 DBMKnl   Sending an administrative statement to the database
                        0x00000e88 INF          8 DBMKnl   Statement:  RESTART
    2009-04-11 12:52:33 0x00000e88 ERR          3 DBMKnl   Received the result of an administrative statement from the database
                        0x00000e88 ERR          9 DBMKnl   Statement:  RESTART
                        0x00000e88 ERR         10 DBMKnl   Returncode: -902
                        0x00000e88 ERR          5 DBMKnl   Errortext:  I/O error
    2009-04-11 12:52:33 0x00000e88 ERR     -24580 DBMSrv   ERR_COMMAND_FAILED: Command 'db_online' has ended and failed with return code -24988.
                        0x00000e88 ERR     -24988 DBMSrv   ERR_SQL: SQL error
                        0x00000e88 ERR     -24778 DBMSrv   -902,I/O error
                        0x00000e88 ERR     -24778 DBMSrv   3,Database state: OFFLINE
                        0x00000e88 ERR     -24778 DBMSrv   Internal errorcode, Error code 9050 "disk_not_accessible"
                        0x00000e88 ERR     -24778 DBMSrv   20017,RestartFilesystem failed with 'I/O error'
    2009-04-11 12:52:33 0x00000e88 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 3456 on computer sapquim).
    2009-04-11 12:53:02 0x00000900 INF          1 DBMSrvCo A DBM Server client connection was established at 2009-04-11 12:53:02 (client process has process ID 3368 on computer sapquim).
    2009-04-11 12:53:02 0x00000900 INF        283 DBMSrv   Command 'db_online' is being executed.
    2009-04-11 12:53:05 0x00000900 INF          1 DBMKnl   Sending an administrative statement to the database
                        0x00000900 INF          8 DBMKnl   Statement:  RESTART
    2009-04-11 12:53:11 0x00000900 ERR          3 DBMKnl   Received the result of an administrative statement from the database
                        0x00000900 ERR          9 DBMKnl   Statement:  RESTART
                        0x00000900 ERR         10 DBMKnl   Returncode: -902
                        0x00000900 ERR          5 DBMKnl   Errortext:  I/O error
    2009-04-11 12:53:11 0x00000900 ERR     -24580 DBMSrv   ERR_COMMAND_FAILED: Command 'db_online' has ended and failed with return code -24988.
                        0x00000900 ERR     -24988 DBMSrv   ERR_SQL: SQL error
                        0x00000900 ERR     -24778 DBMSrv   -902,I/O error
                        0x00000900 ERR     -24778 DBMSrv   3,Database state: OFFLINE
                        0x00000900 ERR     -24778 DBMSrv   Internal errorcode, Error code 9050 "disk_not_accessible"
                        0x00000900 ERR     -24778 DBMSrv   20017,RestartFilesystem failed with 'I/O error'
    2009-04-11 12:53:11 0x00000900 INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 3368 on computer sapquim).
    2009-04-11 12:54:00 0x00000fec INF          1 DBMSrvCo A DBM Server client connection was established at 2009-04-11 12:54:00 (client process has process ID 3596 on computer sapquim).
    2009-04-11 12:54:00 0x00000fec INF        283 DBMSrv   Command 'db_online' is being executed.
    2009-04-11 12:54:01 0x00000fec INF          1 DBMKnl   Sending an administrative statement to the database
                        0x00000fec INF          8 DBMKnl   Statement:  RESTART
    2009-04-11 12:54:07 0x00000fec ERR          3 DBMKnl   Received the result of an administrative statement from the database
                        0x00000fec ERR          9 DBMKnl   Statement:  RESTART
                        0x00000fec ERR         10 DBMKnl   Returncode: -902
                        0x00000fec ERR          5 DBMKnl   Errortext:  I/O error
    2009-04-11 12:54:07 0x00000fec ERR     -24580 DBMSrv   ERR_COMMAND_FAILED: Command 'db_online' has ended and failed with return code -24988.
                        0x00000fec ERR     -24988 DBMSrv   ERR_SQL: SQL error
                        0x00000fec ERR     -24778 DBMSrv   -902,I/O error
                        0x00000fec ERR     -24778 DBMSrv   3,Database state: OFFLINE
                        0x00000fec ERR     -24778 DBMSrv   Internal errorcode, Error code 9050 "disk_not_accessible"
                        0x00000fec ERR     -24778 DBMSrv   20017,RestartFilesystem failed with 'I/O error'
    2009-04-11 12:54:07 0x00000fec INF          2 DBMSrvCo A DBM Server client connection was released (client process has process ID 3596 on computer sapquim).

  • XCelsius 2008 connectivity to SAP Netweaver BW

    Hi All
    I have installed xcelsius 2008 SP2(trial version) and trying to connect it to our BI (Netweaver 7.02) system through SAP NETWEAVER BW connectivity provided in xcelsius.
    While connecting it gives an "error : 2032" . I have some questions regarding it :
    1.  Does licensed version is necessary for making a connection ?
    2.  Do we need to install some Webserver like Apache TOMCAT to run it successfully ?
    3.  If answer to  point 2 is yes , then how can i move forward to config the TOMCAT and establish the connection ?
    4.  The prerequisite , NW 7.0 EhP1 SP5 with ABAP and Java stacks , on server side , means Portal(Java) + BI(ABAP) system or something else ? 
    As per note 1408384 , i have checked wsnavigator for bicsremote connectivity , that is working fine.
    Thanks in advance.

    Hi Karan,
    we are also facing this issue which is getting on our nerves.
    Our BI Backend has EHP2.
    We have also tried different versions of Xcelsius 2008 (3.2, 3.4, 4).
    No chance. After the password entry to our BI backend the system is working. And it ends without getting the query (meta) data  inside. We only see the query names. But after choosing they are not opening.
    Authorizations in Backend and Portal should be fine.
    The web services seem to run.
    So we absolutely have no idea.
    The evaluation version I also dont have. Because I could connet to another BI an could read the query.
    We are wordless. Stay tuned..
    Best regards Harry

  • Max allowed No of rows in SAP NetWeaver BW Connection

    Hi Experts,
    I am building a dashboard using SAP Netweaver BW Connection.
    Query results in approx 4000 rows of data.(we know its not preferred to go with >512 rows of data but client is ok with the performance issue because of more data).
    When i publish the dashboard its showing initializing.... and not moving any further.
    I have changed the max. no of rows in the xcelcius(File->Preferences->Excel options->5000).
    Please help me in solving this problem ASAP.
    Thanks a ton in advance,
    Bhargava Bommidi.
    Edited by: BHARGAVA  BOMMIDI on Mar 31, 2010 11:42 AM

    Hi Bhargav,
    I'm also facing the same issue.
    Have done all the process given in,SAP Note 1307538.Also changed necessary parameters in Xcelsius.(File->Pref.->Excel Options)
    Still the issue is... LiveOffice brings the whole data (approx.>1500 rows) in excel successfully,but when I run the dashboard through parameter/ prompt to webi report it again truncates row after 512 rows.
    Looking fwd for help.
    Regards,
    Chitra

  • Error 2032 in SAP Netweaver BI Connection

    I am using an xcelsius dashboard through a BICS connection. I am able to connect to a BEx query and publish this dashboard to SAP BW system. I also able to launch this dashboard in IE and everything works fine for next 30 min. I am able to go to multiple tabs in the dashboard and trigger various queries etc. However, after exactly 30 min, I get the error 2032. The exact error text says:
    An error has occurred.
    For more information, contact the file creator or your system administrator.
    Error: Error #2032
    Connection Type: SAP NetWeaver BI Connection
    I am unable to find any such settings on the BW server side which can break the connection after 30 min. Also, BO is not involved as it's published on BW server itself. So, I am confused about what could be the reason and how to fix it.
    Thanks in advance for your help.
    Regards
    Akhilesh

    Hi All,
    We were getting the same issue (Error #2032, while connecting to Bex query from DashboardDesign tool, "The First Post"),
    The issue got resolved by installing  "patch 14 for DashboardDesign 4.0 SP2".
    You guys can try the same.
    Thanks
    Riyaz

  • Using 2 data (SAP Netweaver BW) connections in Xcelsius dashboard

    I have a situation when using 2 data (SAP Netweaver BW) connections in Xcelsius dashboard.
    Break-down of issue:
    I have a toggle button in our Sales dashboard which displays Top Ten Customers versus Bottom Ten Customers.  I use the value of the toggle button to trigger the data connections.  When a user clicks the toggle button for Top Ten Customers the value of the toggle button would be a 1 which would trigger a BW query to capture sales data for the Top Ten Customers.  When a a user clicks the toggle button for Bottom Ten Customers the value of the toggle button would be a 0 which would trigger a BW query to capture sales data for the Bottom Ten Custoemrs.  NOTE: all the key figures in both querys use a scaling factor of 1000.  So for example, if invoiced sale has a value of 100,000 the scaling factor of a 1000 would display this key figure with a value of a 100.  The issue I am having with the dashboard is when I click the toggle botton for the Top ten Customers, the value shows as 100 and if i click the toggle button for Bottom ten Customers the value would show as 100,000.  I need the toggle button to show the values using the scaling factor coming from the BW queries for both Top Ten Customers and Bottom Ten Customers. It's only using the 1000 scaling factor coming from the Top Ten Customers.
    Any help on this issue would be graetly appreciated... 
    Thanks,
    Joe

    Hi, I get both. I think the errors are connected. On the one hand it is not possible to create any SAP NetWeaver BW connection, because you cannot enter the connection details- just as in the screen above. The only option you have is to use the "browse" button, but then the blank error appears.
    When trying to open a Dashboard from Portal you have to use SAP->Open and then SAP GUI should appear, but here I get the error "Could not open from SAP" instead. I have installed BEx and SAP GUI of course, reinstalled all of them two times just as recommended above, also reinstalled MS Excel, Flash, Java. Furthermore I tried to repair the installation and to change between different editions, personal, departmental etc.
    In the meantime I think it should not be possible at all to connect to BW with the departmental license key. Can somebody confirm that?

  • Voting Thread for the SAP NetWeaver ABAP Developer Edition for Linux

    Hi Everyone,
    as Mario Herger suggested in the discussion to his Blog [New Community Developer License is available|/people/mario.herger/blog/2010/01/20/new-community-developer-license-is-available] I start the topic requesting a SAP NetWeaver ABAP Developer Edition for Linux.
    Best regards
    Gregor

    I think having a pre-packaged VMWare machine running on Windows or Linux would be great as it would help a lot of the non-Basis consultants get a system up and running. Perhaps even offer it as an AMI package on AWS so that hardware is not an issue.
    I'd also like to see the traditional installation packages offered as many technical consultants use the build as a process to look at installation issue and post installation configuration.
    I think both the pre-built and build it from scratch approaches have an audience here on SDN and I'd like to see both being offered.
    In fact I'm just looking at the new license options one of which come with the DVD's which is ideal but at a price!
    Thanks,
    George M-A

Maybe you are looking for