Linux upgrade not running for me :(

Hi,
Sorry, I already posted this in a different forum, but I think this is a better place for it.
I've been using JRE v1.4.2 in Redhat Linux, but have just installed v1.5.0. When I run "java -version" it still says I'm using version 1.4.2. How do I get the new version to run?
Robert.

Crossposted and resolved:
http://forum.java.sun.com/thread.jspa?threadID=716591

Similar Messages

Default logic not running for a particular team

Hello,
I have a financial consolidation application in BPC 7.5 NW. We have a particular problem, whereby the default logic is not running for one team when they are uploading data. The error message is "Error running default logic. Error converting records. The root element is missing".
Users in other teams are not affected by this and they are able to upload data successfully without any problems and are able to view converted records.
Can someone please explain how this is possible in BPC?
Also, our development consultant created 2 copies of the default logic in the Finance application. In the admin consol, one is called "Default.LGF" and the other one "DEF BU 9 Mar 2011.LGF". Can anyone kindly explain whether it is possible to have 2 copies of the default logic and if so, how does BPC decide which one to run.
In both versions of the default logic, the following code is inserted for FX translation:
// Query 6 - Perform currency translations - run currency translation stored procedure
*XDIM_MEMBERSET CATEGORY=%CATEGORY_SET%
*XDIM_MEMBERSET TIME=%TIME_SET%
*XDIM_MEMBERSET ENTITY=%ENTITY_SET%
*XDIM_MEMBERSET MEASURES=YTD
*RUN_PROGRAM CURR_CONVERSION
      CATEGORY = %CATEGORY_SET%
      CURRENCY = GBP
      TID_RA = %TIME_SET%
      RATEENTITY = GLOBAL
      OTHER = [ENTITY = %ENTITY_SET%]
*ENDRUN_PROGRAM
*COMMIT
Thank you very much.
Edited by: kashifmehmood on Jun 17, 2011 4:12 PM

Hi
1.Users in other teams are not affected by this and they are able to upload data successfully without any problems and are able to view converted records.
One of the reason may be there are some secured dimensions involved like Entity, which is not assigned to the team. Refer to the HTG document below:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207995e8-deb8-2d10-3cb9-8ab146c95a09?quicklink=index&overridelayout=true
2.Also, our development consultant created 2 copies of the default logic in the Finance application. In the admin consol, one is called "Default.LGF" and the other one "DEF BU 9 Mar 2011.LGF". Can anyone kindly explain whether it is possible to have 2 copies of the default logic and if so, how does BPC decide which one to run.
In my opinion your consultant created "DEF BU 9 Mar 2011.LGF" and maintained the logic in that logic file. To run the logic by default, he has to call the earlier logic file in DEFAULT.LGF.
*INCLUDE DEF BU 9 Mar 2011.LGF ( Nothing wrong in keeping the entire logic, but it is not required)
Logic file ""DEF BU 9 Mar 2011.LGF" can be called by DM packages.
Thanks

Analysis Engine Not running for IPS in AIPSSM Module

Hi all,
The Analysis Engine is not running for IPS module in AIPSSM Module. Please let me know how can i resolve this issue and get the analysis engine of IPS to running status.
Regards
Kiran

Hi Kiran,
Ideally, what you can do is to remove the configuration on the ASA that sends traffic to IPS.
The crash in sensorapp or analysis engine might be traffic, configuration related.
We can try to reboot the IPS with no load on it by stopping sending traffic to it.
You can remove the IPS policy from the ASA configuration.
http://tools.cisco.com/squish/2f7A3
What this will do is stop ASA from sending any traffic to IPS.
Now do the hw-module module 1 reset command.
See if the IPS module comes back up.
If that also fails, then you can re-image the module.
This will however erase the configuration on the module.
The re-image procedure for SSM module:
http://tools.cisco.com/squish/ee66a
Hope this helps.
Sid

Linux is not ready for the desktop - Mandriva devs

I just read this in the latest DistroWatch Weekly:
You wouldn't expect something like this to happen at any time, let alone on the eve of Mandriva Linux 2007 release. Last week, two Mandriva developers went on record saying that "Linux is not ready for the desktop". In a web log post entitled Why I'll never use Linux for my main desktop, Vincent Danen concluded: "This kind of thing is precisely why, for me, Linux belongs on the server. Now if those kernel-developing idiots would get their act together and give us a 2.6 kernel that was a) stable and b) supported for more than a week, then I'd really be pleased." Another Mandriva developer, Fabrice Facorat, agreed. In a post called Linux ready for Desktop? Of course not!, he had this to say: "For me when you have control over the environment and the hardware, Linux is ready: think servers, workstations, thin clients, kiosks. However when you have no control on the hardware, Linux is not ready because it somewhat lacks flexibility."
There you have it, right from the horse's mouth! From two guys who have been working for a Linux company, developing a popular desktop Linux distribution, for years! Yes, that's right, Mandriva Linux is not ready for your desktop! Don't waste your money buying it!
One really has to wonder about the future of a company which happily asks Gaël Duval to leave, yet is quite pleased to keep developers who publicly hint that they consider Linus Torvalds, Alan Cox and other kernel developers "idiots"! A perfect pre-release PR, non?
No comments... I just cannot find any words. :shock: :?

ughhhh. Mandrake have always sucked at marketing, they do themselves no favours. IMHO, they're becoming more and more irrelevant with each release. Once upon a time I might have reccomended mandrake to a newbie, but certainly not now. They've got great assets and a good base. The *potential* to become a good distro. But each release, stupid bugs make it through, and the improvements seem negligable.
Once of their better features is their huge repository of packages -- which is horrendously poorly advertised. You'll find nowhere in the GUI's or desktop a place to access their 'contrib' repo which is the equivalent of our extra, and contains a huge amount of packages. Also an important point for mandriva has been mandrakeusers.org/mandrivausers.org, which has been a huge community offering great support for newbies to mandrake, rather than directing them into the expensive mess that is known as the mandriva club. Mandriva have totally ignored this resource, and have made no attempt to support this board, upon which you'll find, I have quite a reasonable post count from back in my early days of Linux (mandriva 8.2 was first distro), and continuing on to now. It also exemplifies their (lack of) decent customer support.
The distro has had countless irritating bugs which pervaded through releases, and all sorts of utterly stupid ones that should never have made it through the testing process. They do little to help themselves with this. I've reported countless bugs, and all of them have been ignored for months. On their last release, they included the old rt2500 module, which at the time, hard locked SMP machines, and made my mandriva unbootable as it was loaded on boot. I filed a bug, marked it as high priority and it was utterly ignored for more than 6 months, so much so I had forgotten about it. Other bugs and emails have suffered a similar fate.
It's GUI tools, have become a complete mess, for example wireless, in 2006 release, was absolutely horrendous to configure, and had no support for WPA -- wpa_supplicant wasnt even on the CD's so people could configure it manually.
It's good to see they're finally ditching their old desktop theme, which they dragged on for far too long. It's always been absolutely hideous.
Their business model emphasises the 'club' far too much, making it difficult to even find a download on their site for the standard version, which has "Free" tacked all over it, as if to try and make you feel like a cheapskate. Doesnt help how they change their release cycle frequently either.
The stupidity of Mandriva just confounds me. PR like this does nothing to help them. They criticise the developers for not providing a 2.6 kernel that is stable. Maybe mandriva should look in their own backyard, and offer a distro that's remotely stable. Last time I used it, it had a horrendously old udev, hotplug, and a very slow hardware detection system. It still used bootsplash, which has been unmaintained for over two years, and included supermount, which Con Kolivas has disowned and again, has abandoned for years. They're hardly doing themselves favours patching their kernels with this out of date crap. Nor do they update them, I dont see mandriva offering updates to newer ones, which would no doubt fix many of the reported issues.
Alternatively they could do what other distros do and pitch in and help. Many of the kernel developers are also employees of other vendors, or have an important part in other distros, such as Daniel Drake and Robert Love. It'd be great for mandrake if they employed a kernel developer, because it's clear THEY are the ones who are the idiots.
I have no idea how they made it out of their bankrupcy, with the lacklustre state of their miserable distro, I think their days are numbered, unless they do something to change around their image and fix their product.
ok, im done.
James

EM is not running for Oracle 10.2.0.5 on windows 2008 R2

Hi,
Recently, I installed oracle 10.2.0.4 on Windows 2008 R2 server followed by 10.2.0.5 patchset and 8350262 patch (to solve the problem of the expired certificate).
After the installation, I created listener and database. The EM was working fine for few hours but not running after that. Listener was running all the times.
I tried to to execute "emctl stop dbconsole" and "emctl start dbconsole".
The EM worked again. However, it down again after few hours. I have repeated this process many times but still cannot resolve the this.
I checked the logfiles in in the sysman/log. Herewith the output.
emagent.trc
2013-06-17 11:05:24 Thread-4100 WARN http: snmehl_connect: connect failed to (dkcopeoradb001.FALCKDKWEB:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2013-06-17 11:09:27 Thread-3520 ERROR ssl: nzos_Handshake failed, ret=28862
2013-06-17 11:09:27 Thread-3520 ERROR http: 296: Unable to initialize ssl connection with server, aborting connection attempt
Please advise and assist.
Thanks.
Regards,
Jia

70d23884-cf5e-4be4-9c7b-5572c797bae9 wrote:
Hi,
Recently, I installed oracle 10.2.0.4 on Windows 2008 R2 server followed by 10.2.0.5 patchset and 8350262 patch (to solve the problem of the expired certificate).
After the installation, I created listener and database. The EM was working fine for few hours but not running after that. Listener was running all the times.
I tried to to execute "emctl stop dbconsole" and "emctl start dbconsole".
The EM worked again. However, it down again after few hours. I have repeated this process many times but still cannot resolve the this.
I checked the logfiles in in the sysman/log. Herewith the output.
emagent.trc
2013-06-17 11:05:24 Thread-4100 WARN http: snmehl_connect: connect failed to (dkcopeoradb001.FALCKDKWEB:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2013-06-17 11:09:27 Thread-3520 ERROR ssl: nzos_Handshake failed, ret=28862
2013-06-17 11:09:27 Thread-3520 ERROR http: 296: Unable to initialize ssl connection with server, aborting connection attempt
Please advise and assist.
Thanks.
Regards,
Jia
Why are you bothering to install a de-supported version of Oracle? 10.2 is history and even 11.2 is at terminal release. The bookies are taking money on when 12c will be released.
When I googled "No connection could be made because the target machine actively refused it." I got many, many hits that look useful.

Job dependecny with Not running for other jobs condition

Hi,
I have a job chain which should run with the below conditions
1) at 19:00 GMT.
2) Also it has another dependency that it should check for job x and job y and both these job x and job y should not be running.
I checked for creating job locks and locks can be used for two jobs and it compliments each other and cannot be used in this case.
How do I set this dependency in this case.
Thanks.

Hello,
Then I don't understand the scenario.
So the 19:00 job can only start when job x and y are not running. But job x and y can start when the 19:00 job is running?
In that case create a pre-running action on the 19:00 job that checks if job x or y are running and waits for them to finish.
Regards Gerben

OC4j is not running for OBI10g (perfcounter problem)

Hi Gurus,
Earlier I could work with OBI EE 10g,
but now when I wanted to start OC4j
I continually get the following message pair:
2011-05-17 16:26:00.328 NOTIFICATION Oracle BI Presentation Server has stopped.
Perfcounter data is not collected.
2011-05-17 16:26:00.328 NOTIFICATION Oracle BI Server has started. Perfcounter d
ata is collected.
after the
- Scheduler BIPublisherScheduler_$_NON_CLUSTERED started.
11/05/17 16:25:52 Oracle Containers for J2EE 10g (10.1.3.1.0) initialized
But the BI server and the Presentation server seem to be working, but I am not able to work with presentation services.
Any ideas?
Many thanks in advance!
Best regards
Laszlo

Hi lczinkoc,
Did your question answered..?
Is your problem resolved..
I am also getting the same problem...
2011-05-24 17:59:04.738 NOTIFICATION Oracle BI Server has stopped. Perfcounter data is not collected.
*2011-05-24 17:59:14.738 NOTIFICATION Oracle BI Server has started. Perfcounter data is collected.*
011-05-24 17:59:44.738 NOTIFICATION Oracle BI Presentation Server has stopped.
Perfcounter data is not collected.
but Perfcounter data is collected: this does not happen for BI Presentation Server.

Dispatcher Not running for XI

Hi Gurus,
I have a XI 3.5 system with Oracle 10.2 Database.
Errors
01) From MMC Dispatcher is not running
02) 'Work' Folder is also not accessible. Although the folder is showing almost 3.5 GB of Data but on clicking no files can be seen
R3trans -d is successfull, Oracle & listener is also running
Please suggest....
Regards,
Souren
Edited by: Souren on Jun 15, 2009 10:04 AM

The directory 'work' is not hidden or compressed. Same problem persists with this folder.
But now the system is up but dispatcher is yellow and following msg is showing.
"Running but dialog Queue Info Unavailable: j2ee all processes running"
The only thing that I did is I have re-initialise the auth to all SAP & Administrative users from OS level.
Please suggest
01) How to get access of the Work folder.
02) How to make the dispatcher green from yellow?
Regards,
Souren

Conversion routines do not run for ALV after upgrade

Hi,
We just upgraded from 4.6 to 6.0 and the custom created ALV reports which had fields like MATNR , VBELN , AUFNR now show leading Zeros. It seems the conversion routines are run before the list is displayed.
If we add the REF_FIELD and the table in the Field Catalog, it seems to work, but that would a big change as we would have to manually change all the reports. Any suggestions.
Regards,
SG

Thanks - our ticket should be getting closed out on it (our dba will be updating it), the scheduler has been running reliably since we took the steps in the doc mentioned.

SL Upgrade not ready for prime time - too many issues for no real value

I am thinking the upgrade to SL was a mistake -
On a macbook pro that was running acceptable. Decided to jump on the SL bandwagon....and I am finding reduced battery charge, a service the battery icon, battery times that jump up and down by 20-30 min in the status bar, system shut downs, loss of range on AE that we use for airtunes and when it connects, itunes cut outs as the device is 10 ft away!. Add in that both Rapidweaver and Quickboks for Mac dont run, many keychain errors, system crashes and al this for ..... for no real benefit!
On bright side I see is that I'm glad it was only $9.95 on the up to date program - $29 would have been a waste of that extra $20!
Hurry up Microsoft, er, Apple and get a fix out quickly!
next time, will wait till after the next bug fix as this seems to happen all the time!

I have to admit some confusion - you have way too much to keep backing up such that Time Machine wouldn't work? That seems the exact reason to use Time Machine - constant, automatic updates!
Did you try holding the option key? Like I said, the SL install/hard drive should have no effect on your ability to boot into Leopard, especially at this stage of the boot process. If you Mac Pro can't see your Leopard install at this stage, that suggest some hardware error - SL wouldn't even have booted at this point! But with Time Machine, the 200 gigs of data wouldn't be a problem - it could be pick what you needed fairly easily and you could narrow the data as needed.
I'm not sure what your issue is with "being testers" for Apple - certainly you knew that going into this OS upgrade, as you stated with Leopard. There are going to be issues, sometimes serious ones, with new OS upgrades - the vast majority of people might have no issues, but it's not impossible that you will. Certainly in my case, none of my day to day programs have crashed - even Photoshop CS opens like normal! Maybe it's because I did an archive and install with Leopard before my SL install, but I'm certainly not experiencing your issues.
If you don't want to Time Machine, then the easiest thing to do would be to erase the current SL install, clone the Leopard install to the other partition, and then try the upgrade holding the "C" key to boot from the DVD. But it looks like you're not really looking for help anymore. Hope all is well, nonetheless!

Another fix to try for Flash 10.1 not running for limited users

I tried these instructions from this website:
http://techreport.com/forums/viewtopic.php?f=30&t=73051&start=0&st=0&sk=t&sd=a
http://techreport.com/forums/viewtopic.php?f=30&t=73051&start=0&st=0&sk=t&sd=a Quote:
"The latest build of Flash is 10.1.82.76, a security update. The installation of that update created a permissions conflict on my system and at least one other which caused embedded Flash content to not display.
The fix for this is to uninstall Flash and then delete the following registry key (Admin rights will be required).
HKEY_CLASSES_ROOT\MIME\Database\Content Type\application/x-shockwave-flash
Then install Flash and the permission mask should now be correct. A quick test of embedded content will confirm."
After trying various ideas over the past three days, this was the only one that worked for me. For those unfamiliar, you can get to the registry key by doing Start/run/regedit. Then keep expanding each section til you get to this particular key. Right click on it and delete. You might want to set a restore point first, just in case things go wrong. Start/All Programs/Accessories/SystemTools/SystemRestore then choose create a restore point.

function(){return A.apply(null,[this].concat($A(arguments)))}
GCMarion wrote:
I tried these instructions from this website:
http://techreport.com/forums/viewtopic.php?f=30&t=73051&start=0&st=0&s k=t&sd=a
http://techreport.com/forums/viewtopic.php?f=30&t=73051&start=0&st=0&s k=t&sd=a Quote:
"The latest build of Flash is 10.1.82.76, a security update. The installation of that update created a permissions conflict on my system and at least one other which caused embedded Flash content to not display.
The fix for this is to uninstall Flash and then delete the following registry key (Admin rights will be required).
HKEY_CLASSES_ROOT\MIME\Database\Content Type\application/x-shockwave-flash
Then install Flash and the permission mask should now be correct. A quick test of embedded content will confirm."
After trying various ideas over the past three days, this was the only one that worked for me. For those unfamiliar, you can get to the registry key by doing Start/run/regedit. Then keep expanding each section til you get to this particular key. Right click on it and delete. You might want to set a restore point first, just in case things go wrong. Start/All Programs/Accessories/SystemTools/SystemRestore then choose create a restore point.

Depreciation not run for single asset-Why

Hi Experts,
Could anybody advise me why I am unable to run depreciation of single asset,(AFAB and repeat run used)
However.I can ran depreciation of all assets of the company code(all are working fine),
So Please suggest me how can I run depreciation for a single asset (Any specific configuration?)
Note:-
When I am checking AW01N I found depreciation of a asset has been posted for period-15(spl period)
But for other asset -depreciation has not been posted for period-15(showing planned only and revaluation amount also showin in plan ,done through AB01)
So I am trying to post the depreciation for the period -15,
So that after depreciation posting revaluation amount also can go in posted amount(revaluation amount showing in plan only as depreciation has not been posted for the period-15)
Please advise
Thanks and Regards

Hi,
As per standard SAP, depreciation can be run at company code level and not at asset level.
If you just want to check the nature of posting, you can give a single asset and run in 'Test Run' mode.
Regards,
Sridevi

Gather schema stats not running for custom schema's in EBS 12.1.1

Hi All,
We are running Gather schema stats program periodically in our EBS system with Schama name as "ALL", but it is not generating the statistics for the custom schema. We have custom schema registered in our EBS application. Can you please let us know if there is any issue with our setup or this is standard behaviour of Gather schama stats concurrent program.
Thanks,

Hi,
At how much percent ur using with Gather schema stats program like 10%,20%(in Gather schema stats program form)...I think there are no updates on the tables of that custom schema thats why the gather schema progam ignored it..can u check were there updates?
Regards

Fireworks CS5.1 will not run for a specific user.

I am in the IT dept. of my organization and we have Adobe Creative Suite 5.5 installed on many systems. On one particular system, we installed the CS5.5 Web Premium suite and when the end user (who is not an administrator on their workstation) started to use it, she found that Fireworks CS5.1 will not load. When she clicks on it to launch it, it starts to load, then she gets the spinning beachball and the application stops responding.
I created a local (non-AD) account on her machine with admin privileges, and when she logs into it, Fireworks immediately loads and works properly.
Our security rules do not allow users to operate as administrators on their workstations. So my question is - what can I do to get Fireworks to load and run properly for a standard user account?
Interestingly, all other CS5.5 apps seem to work just fine for her.
Bob Reed

Have you tried giving the user administrative privileges?

Firefox will not run for mulitple instances of the SAME user account on Windows Multipoint Server 2011

We have an HP MS6200 MulitSeat PC
It is running Microsoft Windows MultiPoint Server 2011 (which appears to be a tweaked version of Windows 7)
It is set up in a computer lab, and students log in using their shared room account - ie multiple instances of the same user accounts are running on the PC at the same time.
The first student to run Firefox can work with it without problem.
However when another student tries to start firefox they get the following message:
Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

Thanks for the quick reply.
I managed to get this to work by using:
"C:\Program Files (x86)\Mozilla Firefox\firefox.exe" -profile "%temp%\ffprof" -no-remote
This works because Windows assigns a different temp location for each instance of a user
Thanks for your help

Linux upgrade not running for me :(

Similar Messages

Maybe you are looking for