Linux won't install on G72

I've tried installing both Linux Mint and Ubuntu on my computer, but no matter what I try I have the same problem. I boot to the DVD or USB containing Linux, and the menu allowing me to choose what to do pops up just fine. I can pick if I want to boot Linux normally, boot in compatability mode, check the integrity of the DVD/USB, or boot to my local drive. No matter what, if I try to boot to Linux, it will process for about ten seconds or so, and then my computer powers off. Right in the middle of booting to Linux, my computer somehow rejects it and shuts down. I do not know what is causing this. It sounds like some sort of security feature that I'm unfamiliar with. In the Linux forum it was suggested that my BIOS is to blame. My BIOS version is F.48, which is the most recent suggested BIOS for my computer, according to HP. Linux also has some issues booting on computer with certain graphics cards, but that is fixed by simply adding "nomodeset" into the boot kernel, which didn't help me at all. I have Windows 7 on my main partition, Windows 10 Technical Preview on a second partition, and I was going to put Linux on a third partition. I don't think either of the Windows distributions would affect booting to a live CD though, since they don't have a chance to boot either. Has anyone else ever experience something like this? Does anyone have any ideas as to how I can go about in fixing this? I've tried everything I can think of and have done hours of research on this, and I have come up with nothing.

jfred3 wrote:
After doing some research, pretty much the only problem people had with installing Linux on machines with Windows 8 or newer was when they had problems with secure boot. Secure boot is a feature that can be enabled in the technical preview as well, however, since my machine is older than Windows 8 machines, it has a traditional BIOS instead of the UEFI firmware used by those machines to operate the secureboot feature. Therefore, my computer is incapable of running secure boot. I ended up double checking anyway, just for kicks, and sure enough secure boot is not being supported on my machine. Beyond that, I don't see how deleting a partition would help me gain access to a live cd, since they don't boot from the hard drive anyway.
You do know you can disable UEFI boot to Legacy boot if you want to install O/S that isn't Windows on it but then you will not get support for it. And if you install Linux you will have to go to a Linux forum and get support and help from them there.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Similar Messages

Adobe Air Linux won't install on Eee PC

Hi - I've been getting some advice on this from @smmehadi on
Twitter but it's hard 140 chars at a time...
I'm trying to install Air on my Eee PC 701, which runs
Xandros Linux. I know this isn't a supported distro but I know some
others have got it to work.
When I run the installer, running as root, I get the licence
panel and then click "I Agree". I then see the "Adobe AIR Setup"
panel and the progress indicator goes abot 3/4 of the way along
before it stops and displays the message: "Sorry, an error has
occurred" "An error occurred while installing Adobe AIR.
Installation maynot be allowed by your administrator. Please
contact your administrator"
As advised, I've done a chmod +x on the installer. I've tried
to capture the .airinstaller.log file but it doesn't exist. If I
created it, nothing is added to it by the installation.
I do have a bunch of files in /tmp/airCrashLogs - are they of
interest to you? I've also noticed some messages appearing in
~/.xsession-errors.
Many thanks,
Alan

Hi Alan,
First of all as your AIR installer is crashing, so please
check if you have sufficient free memory available (more then
around 200 MB to be on safer side).
The please repeat these steps on terminal:
1. touch ~/.airinstall.log
2. chmod +x Desktop/AdobeAIRInstaller.bin
3. Desktop/AdobeAIRInstaller.bin
this will popup the GUI for installation, proceed to the
point it goes
when installer has failed or crashed open the log file in any
editor
4. vim ~/.airinstall.log
or
gedit ~/.airinstall.log or kate ~/.airinstall.log
and copy the contents of log (~/.airinstall.log) and send
them to syed-attherateof-adobe-dotcom
-Syed

K8T Neo Won't install Windows XP - Linux works fine

OK, i just installed this MOBO, and I'm having a big problem. It boots up fine, finds everything in the BIOS, but it won't run or install Windows. I tried just using my old Windows XP install to begin with. I would get a stop error before the Loading Windows screen even came up. It wouldn't run in safe mode either. I don't remember exactly what the stop error was anymore. I then booted into Linux, and it runs fine. So, I decided to reinstall Windows. I put the CD in, it says press any key to boot from CD, and then it says "Checking hardware configuration" or something like that and freezes right there without giving an error. I have to manually reset the computer.
I tried deleting the Windows partition and running setup again with the same results. I even tried booting from a copy of the Windows disk, and tried installing Windows XP 64-bit edition as well. Same results with both. I reinstalled Linux because I messed up the boot record when I deleted the Windows partition, and the Linux install went flawlessly.
I have tried disabling SATA, USB, parallel ports, serial ports... everything I could think of in the BIOS. I've tried it with PnP OS support turned on and off. I've tried loosening the RAM settings as far as I can. Nothing seems to work.
It's obviously not a CD-ROM issue, because Linux installs fine. I've also tried multiple drives and media. Linux is also installed on the same HDD as the Windows partiton, so it shouldn't be a HDD problem. I've also tried swapping my Radeon 9800 out with a GeForce Ti 4600, and I've tried swapping the PSU supply out with another (although the other was only 250W).
For the life of me, I can't figure out what the problem may be. Anyone have any ideas?
- TIA

I really don't think it has anything to do with the PSU. I've been using this PSU for over 6 months now on this system (had a Soyo K8USA Dragon Ultra in there before... otherwise the same system) I've never had a problem, and I usually have a lot of crap running at once, e.g. DVD ripping/burning, file sharing, gaming, word processing, programming, browsing, etc., etc. Granted, it's not the best PSU in the world, but it gets the job done quite well. Also, now that Windows is installed, the problem has not reoccured.
The only thing I have noticed is that it takes quite a while to load the Windows loading screen now. This screen should come up almost immediately. Instead, there is about 30 seconds or so of waiting where all I see is a blank screen. Afterwards, everything runs fine. I have disabled the "show list of operating systems" option in Windows so that's not the issue.

Yosemite won't install due to a "S.M.A.R.T. drive problem that can't be repaired."

After downloading Yosemite successfully, it won't install due to a "S.M.A.R.T. drive problem that can't be repaired." It says to back up as much as possible and replace the drive. Everything works flawlessly with Mavericks. What gives??

If you are getting a S.M.A.R.T. error then you should be more worried about losing everything on your drive then about upgrading your Mac OS. Regardless of if you are running Mac OS, Linux, or Windows, you should never just disregard such a drive error. S.M.A.R.T. is designed to give you a warning that your drive is statistically having far more errors than normal and should be backed up immediately and typically replaced.
In your case, it's likely a coincidence that your drive is failing at the time you are attempting to upgrade to Yosemite. You should stop what you are doing, backup your drive (if you don't already have the backups that you should prior to any OS upgrade), and replace the hard drive prior to moving forward.
To make it clear, your hard drive is likely going to fail soon and you may lose everything on it at any moment. This failure has nothing to do with Yosemite or any Mac OS. All hard drives fail at some point. Hopefully this S.M.A.R.T. notice has given you the opportunity to solve a major problem before it gets worse.

FFMPEG won't install

Hi folks.
Just grabbed the May 2 snapshot of ffmpeg, and she won't install.
*make(6189) malloc: * vm_allocate(size=4272951296) failed (error code=3)*
*make(6189) malloc: * error: can't allocate region*
*make(6189) malloc: * set a breakpoint in szone_error to debug*
*make: * virtual memory exhausted. Stop.*
Thing is, my startup/scratch dirve has 167 GB free.
Anyway, I want to go back and get previous versions, but they don't have any previous versions posted, from what I gather. I don't use any of the Linux type of YUMs, so perhaps that's an option? Anybody have any notes on how to do that?
Thanks

No, the product you're troubleshooting is ffmpeg, and since you're apparently trying to compile the product from the source code, you really need to be addressing it on their web site. In any case, the iPhone forum isn't really the place for this question since it's not an iPhone issue per se. The Mac OS X forums would be a better place if for some reason you feel that you need to post in the Discussions.
But why are you bothering trying to build ffmpeg from the source code? Why not just use MPEG StreamClip which already contains all the necessary components? Or one of the many other pre-built video conversion utilities, many of which (as is StreamClip) free?

Firefox won't install on my computer

I've had firefox installed on my laptop forever. Lately, it's been having trouble updating firefox. I removed the firefox program and then tried to reinstall it on my laptop. I click on the download button and click run but nothing ever happens. I even tried saving the program and same thing. It saves I click on the setup and it still won't download. PLEASE HELP!!!!

Hello lynchsta ,
Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox program files and then install Firefox. Please follow these steps:
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
Or better yet, download the full setup file here: https://download.mozilla.org/?product=firefox-33.0.2-SSL&os=win&lang=en-US ( I assume that u use windows and language English US ) . For other builds: https://www.mozilla.org/en-US/firefox/all/
# Before trying to install it, delete the Firefox installation folder, which is located in one of these locations, by default:
#*'''Windows:'''
#**C:\Program Files\Mozilla Firefox
#**C:\Program Files (x86)\Mozilla Firefox
#*'''Mac:''' Delete Firefox from the Applications folder.
#*'''Linux:''' If you installed Firefox with the distro-based package manager, you should use the same way to uninstall it - see [[Installing Firefox on Linux]]. If you downloaded and installed the binary package from the [http://www.mozilla.org/firefox#desktop Firefox download page], simply remove the folder ''firefox'' in your home directory.
#Now, go ahead and reinstall Firefox:
##Double-click the downloaded installation file and go through the steps of the installation wizard.
##Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
<b>WARNING:</b>Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. 
Please report back to say if this helped you!
Thank you.

Windows Vista won't install Ipod

Latest version of Itunes 7.4.2 has been installed, unfortunately Windows Vista has located Ipod mini in "other devices" in "Device Manager", but it won't install the Ipod. I've reinstalled Iteune three times and searched the Windows Vista disk, but with no luck.
I'm on the verge of selling the ipod - any advice would be welcome.
Thanks

I suggest either getting a Mac or going back to Windows XP because Vista is known to have these problems.

My new blank hard drive won't install OSX from the disk?

For some reason my Mac book pro won't install OS through the install cd or through the flash drives. It will load the disk but then freeze when I click install. It won't load through the USB either. I have done multiple diagnostics at the mac store and they tell me that my hd is bad. Twice the hd was fresh out of the box and installed that day. I spoke to a supervisor via phone when I called apple care and he told me that unless I have all apple parts in the computer they can't accurately diagnose the issue. It feels like they're trying to con me into paying double for a "apple hd". What can I do to get my computer working?

I would purchase an external USB enclosure for the HDD. With the HDD in the enclosure, install OSX and then mount in your MacBook. If you continue to have problems, it could be a faulty internal SATA cable.

ITunes won't install (at all) on my Windows 8.1 64 bit computer

I've tried downloading iTunes for Windows 8.1 64-bit computers and it won't install on my machine. I did everything like I think I was supposed to ... but nothing happens. In addition I've tried connnecting my iPhone 5S to a USB port ... nothing good happens. My computer recognizes the iPhone but it won't do anything with it. Also I've tried the suggestions from "windows 8.1 itunes wont recognize iphone: Apple Support Communitites" which entertains that I can open control panel ... find Device Manager and try to install new driver software from my disk ... with the suggestion that I 'browse' and find "C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers. ... and "Apple" does not exist under Common Files of either "Program Files" or "Program Files (x86)"
So now what????

What is the full text of the error message?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

Creative Cloud Desktop app won't install error 207; Adobe server?

Is there a problem with some of Adobe.com servers? My employer just purchased a CC subscription for my work Mac, and the CC Desktop App won't install. I've restarted my Mac, quit all Adobe products, redownloaded the DMG file (creativecloudinstaller.dmg), and checked to make sure my firewall is off. But I still get an error message #207. My DNS servers are set to the same ones that other Macs in my group are set to, and they have CC on their Macs.
I don't know if it's related, but I can't load "adobe.com" in my browser, either. All other webpages are fine, including (obviously) this forum.
I am using OS 10.8.5, connected via Ethernet, and my browser is Chrome.

Thank you for your help, Ned. I also called Adobe help via phone, and he confirmed that my company's server needed to whitelist several Adobe sites. The company had revised their servers not long ago, and evidently did not transfer their old whitelists (which is why my coworkers had previously been able to access Creative Cloud). The phone support person emailed me a helpful list that I could forward to our company's tech support center—but the link you supplied in your response was also perfectly relevant.

CS4 master Collection won't install on XP

After paying the big bucks for this CS4 Master Collection software, I can't get it to install. I have 1.5 gig of ram, all slots full. Will it not install with that? The install won't let me install on a drive with 123 gig of free space, the install pop-up says there's not enough room please change location. I change it to another drive with 197 gig of open space and it won't install.
Customer service is closed until Monday...I'll be back in class and don't get out until 8pm every frickin weekday.
I'm working on a sony the runs 3.20 ghz with the 1.5 gig of RAM. I just reformated the harddrive but windows takes up the C: partition but the extention is 123 gig, and I have several other drives (with hundreds of gigs open) I've tried to put it on....it says they're too small.
I've tried to install the trial version and it does the same thing. I'm at my wits end with this!
If there's only one out there willing to help me I would really appreciate, because Adobe doesn't seem to give a fig about helping me.

How much free space is on the C:/drive? Without a lot of room you'll have a hard time installing any program even if you install it to a different drive. Windows needs lots of free space on C: for installing applications.
If you have little free space, then whoever set up that machine did a very poor job of it. There is no benefit at all to installing applications on a different drive than the operating system.
Bob

OVI Won't install on my XpressMusic 5730 (hangs at...

I am trying to install the OVI application on my phone so that I can download apps and games but it won't install. After the install it starts up and I see the loading screen but that is all that I get. I do get an icon for OVI but if I try to use it it just does the same thing. Does anyone know how to resolve this? I have tried doing a hard reset and that does not resolve the issue at all.

Hi Smileyfrog,
Could you be more specific about your issue.
Which operating system do u use?
Which model handset you use?
Which firmware version do you have in your mobile? ( *#0000# will reveal the details)
Are you trying to connect thru cable or thru Bluetooth?
Which version of OVI suite you use?
Go to OVI suite -> help -> About nokia OVI suite -> System information. Paste the information...
Please attach a screen-shot of the issue which you are mentioning.
Regards,
Diwa
If you like my post, kindly acknowlege the same by giving a kudos to me

I am trying to install Mavericks on my McbookAir, but it won't install, saying that my hd is used for time machine backups. I have an external HD connected to my mbAir that I'm using for time machine.

2012 Macbk air, with OSX 10.8.5. See my question above. Mavericks won't install on my Air's HD, says that both the HD - AND - the external HD (which has a different name from the laptop HD) are used for time machine backups. I've deleted my time machine plists, restarted, repaired permissions, turned time machine off, repeatedly selected the external drive in time machine preferences. HELP. (Install went perfectly on my desktop Mac, which also has an external HD for time machine).

I need to add that the only place I have the "Backups.backupdb" folder is on my backup external disk, and it's not on my HD :-( . If it were, I'd delete it!

TS1702 I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck.

I tried to download the upgrade, now it won't install and I can not access my documents. It said Vi did not have enough space for the upgrade so I made room but still no luck. If I delete the ap and reinstall I will lose my stuff. Any ideas? It won't open so I can email it to myself.

What upgrade are you trying to install? Your profile shows iOS 5.1.1, which is the current max iOS.
 Cheers, Tom

Application (WMF 3.0) won't install during maintenance window, but will install when there is no maintenance window

Hi All,
I'm just getting into the Application model in SCCM 2012 R2 and I like what I see so far, but i'm running into an issue. When i set up an Application for WMF 3.0 with a prerequisite of .Net 4.0 and deploy it to a set of test systems that do not have
any maintenance windows applied to it, it works great. If it doesn't have .Net 4.0 it installs both that and WMF 3.0 and reboots. If it already has .Net 4.0, it will skip that and just install WMF 3.0 and reboot.
However, if i deploy it to systems that have a maintenance window applied, the application recognizes that it needs .Net and WMF 3.0 or just WMF 3.0, but it never actually runs.
Here is the applicable entry from the appintenteval.log, and i've bolded the line where it shows that WMF 3.0 is not installed
ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66/12 :- Title = WMF 3.0, Direct seleted dependencies = ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558/7 title=.Net
4.0,    AppIntentEval   4/24/2014 8:20:19 AM   1768 (0x06E8)
ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66/12 :- Current State = NotInstalled, Applicability = Applicable, ResolvedState = Installed, ConfigureState = NotNeeded, Title = WMF 3.0   AppIntentEval
4/24/2014 8:20:19 AM   1768 (0x06E8)
ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558/7 :- Current State = Installed, Applicability = Applicable, ResolvedState = Available, ConfigureState = NotNeeded, Title = .Net 4.0   AppIntentEval
4/24/2014 8:20:19 AM   1768 (0x06E8)
ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/Application_de66c10e-111e-4d68-95a8-5cee3f144081/13 :- Current State = NotInstalled, Applicability = Applicable, ResolvedState = Installed, ConfigureState = NotNeeded, Title = WMF 3.0   AppIntentEval
4/24/2014 8:20:19 AM   1768 (0x06E8)
ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/RequiredApplication_de66c10e-111e-4d68-95a8-5cee3f144081/13 :- Current State = NonCompliant, Applicability = Applicable, ResolvedState = Compliant, ConfigureState = NotNeeded, Title = ApplicationIntentPolicy
AppIntentEval   4/24/2014 8:20:19 AM   1768 (0x06E8)
and here are the entries from the AppDiscovery.log that are relevant:
Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558" AND Revision = 7)"   AppDiscovery
4/24/2014 8:20:19 AM   2776 (0x0AD8)
    Performing detection of app deployment type .Net 4.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558, revision 7) for system.   AppDiscovery   4/24/2014 8:20:19
AM   2776 (0x0AD8)
+++ Discovered application [AppDT Id: ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558, Revision: 7]   AppDiscovery   4/24/2014 8:20:19 AM   2776 (0x0AD8)
+++ Detected app deployment type .Net 4.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_4e541fdb-f444-4c5f-91f9-82c358325558, revision 7) for system.   AppDiscovery   4/24/2014 8:20:19 AM
2776 (0x0AD8)
Entering ExecQueryAsync for query "select * from CCM_AppDeliveryType where (AppDeliveryTypeId = "ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66" AND Revision = 12)"   AppDiscovery
4/24/2014 8:20:19 AM   2508 (0x09CC)
    Performing detection of app deployment type WMF 3.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66, revision 12) for system.   AppDiscovery   4/24/2014 8:20:19
AM   2508 (0x09CC)
+++ Application not discovered. [AppDT Id: ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66, Revision: 12]   AppDiscovery   4/24/2014 8:20:19 AM   2508
(0x09CC)
+++ Did not detect app deployment type WMF 3.0(ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66, revision 12) for system.   AppDiscovery   4/24/2014 8:20:19 AM
2508 (0x09CC)
   ActionType - Install will use Content Id: Content_c6b448d0-7b59-4796-bb29-3f7fbfa6e70d + Content Version: 1 for AppDT "WMF 3.0" [ScopeId_DDF2880D-575F-42D9-A30B-E026F0EFDA4F/DeploymentType_0418fd00-0911-41d8-97f5-d7f04f58bd66],
Revision - 12   AppDiscovery   4/24/2014 8:20:20 AM   2508 (0x09CC)
I have a 2 hour maintenance window applied to this system. From the serviceWindowManager.log:
OnIsServiceWindowAvailable called with: Runtime:7200, Type:2   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
No Service Windows exist for this type. Will check if the program can run in the All Programs window...   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
        Biggest Active Service Window has ID = {02B82DF5-3360-4BCC-8154-9258F0B856C3} having Starttime=04/24/14
08:20:00   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
            Duration is 0 days, 02 hours, 00 mins, 00 secs   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
FindBiggestMergedTimeWindow called with TimeStart=04/24/14 08:20:21 and TimeEnd=04/24/14 10:20:00   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
        Biggest Chainable Service Window for Type=1 not found   ServiceWindowManager   4/24/2014 8:20:21 AM   1768 (0x06E8)
I'm not sure what else to try next and appreciate any help anyone can offer.

Thanks. I checked that setting and i have it set to false, so i don't think that's it.
I've done a little more experimenting. I've changed my maintenance window back to 30 minutes. Prior to the MW opening, i'll run an application evaluation deployment cycle on the system. It will show the system as required WMF 3.0 but since
the MW isn't open, it won't install at the time.
When the MW opens, i'll watch the ServiceWindowManager.log and it sees that it's a 30 minute MW and that the run time is 15 minutes but it still says the program can't run:
ActiveServiceWindow has 1800 seconds left   ServiceWindowManager   4/24/2014 2:20:00 PM   2032 (0x07F0)
Program can run! Setting *canProgramRun to TRUE   ServiceWindowManager   4/24/2014 2:20:00 PM   2032 (0x07F0)
OnIsServiceWindowAvailable called with: Runtime:900, Type:6
ServiceWindowManager   4/24/2014 2:20:00 PM   2032 (0x07F0)
        Biggest Active Service Window for Type=6 not found   ServiceWindowManager   4/24/2014 2:20:00 PM   2032 (0x07F0)
Program cannot Run! Setting *canProgramRun to FALSE   ServiceWindowManager   4/24/2014 2:20:00 PM   2032 (0x07F0)
OnIsServiceWindowAvailable called with: Runtime:900, Type:2   ServiceWindowManager   4/24/2014 2:22:32 PM   816 (0x0330)
If however, i kick off another application evaluation deployment cycle on the system during the open MW, the deployment kicks off right away and finishes.
Program can run! Setting *canProgramRun to TRUE   ServiceWindowManager   4/24/2014 2:22:32 PM   2940 (0x0B7C)
OnIsServiceWindowAvailable called with: Runtime:900, Type:3   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
No Service Windows exist for this type. Will check if the program can run in the All Programs window...   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
        Biggest Active Service Window has ID = {02B82DF5-3360-4BCC-8154-9258F0B856C3} having Starttime=04/24/14 14:20:00   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
            Duration is 0 days, 00 hours, 30 mins, 00 secs   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
ActiveServiceWindow has 1571 seconds left   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
Program can run! Setting *canProgramRun to TRUE   ServiceWindowManager   4/24/2014 2:23:49 PM   816 (0x0330)
This is not the behavior i would expect. I would think that if the client knows it has a pending application deployment that is required, when the MW opened up, it would start the install immediately or close to the beginning of the MW. It shouldn't
need to have an application evaluation deployment cycle kicked off during the MW.

Linux won't install on G72

Similar Messages

Maybe you are looking for