Lion 10.7.4 Console: Could not find image named 'ForwardArrow'.

I found following message presented in syslog since today evening, however, the system is running fine so far.
12-5-22 下午10:25:44.345 Console: Could not find image named 'BackArrow'.
12-5-22 下午10:25:44.345 Console: Could not find image named 'ForwardArrow'.
could someone to explain what was caused this error message? and how can I solve the problem

It could mean that these two files are missing from the Console.app, where it should go into the folder Resources of the folder Contents. For some reasons, they don't seem to get installed with Lion under certain circumstances.
Right-click Console.app (in the Applications/Utilties folder) and open those folders, then copy the two files BackArrow.png and ForwardArrow.png into the Resources folder).
On my machines, this helped the messages go away (end even stopped some sporadic freezing :-)
I just took the corresponding files from the Console.app of my previous Snow Leopard installation (same place).
HTH

Similar Messages

"console: Could not find image 'BackArrow' " Does somebody know what it means ???, "console: Could not find image 'BackArrow' " Does somebody know what it means ???

Hi All. In my console appeared message "console: Could not find image 'BackArrow' ". Does somebody know what it means ???
BR

I believe this to be a bug in Console.app and that it started with 10.7.3 or 10.7.4. The message is generated by Console.app (Console: Could not…). On my system it is always these 2 messages and they are triggered by launching Console.app.
03.06.12 21:33:54,927 Console: Could not find image named 'BackArrow'.
03.06.12 21:33:54,927 Console: Could not find image named 'ForwardArrow'.
Try opening and closing Console.app a few times and you’ll see. I suppose this is just a bug where the app is trying to locate some of its resources which might just be icon images for back/forward that are (maybe) no longer used but still referenced.

"console: Could not find image 'BackArrow' " Does somebody know what it means ???

In my console appeared message "console: Could not find image 'BackArrow' ". Does somebody know what it means ???
BR

See
https://discussions.apple.com/thread/3970549?start=0&tstart=0

Could Not Find XObject named FM_0002

Hi, I was hoping that someone can help me. I am using Output Designer and Central 5.5. I recently tried to run a dat test through Central consisting of 4 different forms (5 pages in total). The third form was two pages long and when I scrolled through the PDF output page #4 I get the following message:
Could Not Find XObject named FM_0002_a0000n03
A0000N03 is the form name of the fourth and final form. However, the second page of the 3rd form does not appear (or more precisely the static text does not appear...all fields print). The final page of the document is fine. I can't figure out what could be causing this error. Has anyone come across this in the past? I'd appreciate any sort of help you could offer!
Thanks

Hi all
HP does have an automatic update feature for its computers. Maybe that is activated. See if there is something like an HP Update in your Startup programs under msconfig. I usually disable most everything in the Startup section anyway.
oto kiralama
kiralık oto
araba kiralama
minibüs kiralama
araç kiralama
kiralık araba
kiralık araç

Getting error message "Could not find XObject named 'n2'" in Adobe 8

Hello,
I have developed one component in VC++ which Signs PDF files.
But when i opened signed file(in Adobe 8), I am getting one alert saying
"Could not find XObject named 'n2'"
can any one tell me what's wrong in my Signed PDF file.
Origninal File is
http://www.2shared.com/file/4704539/19fa9557/Test.html
And Signed File is
http://www.2shared.com/file/4704538/6efda5c1/Signed-Test.html
Thanks in Advance

Hi all
HP does have an automatic update feature for its computers. Maybe that is activated. See if there is something like an HP Update in your Startup programs under msconfig. I usually disable most everything in the Startup section anyway.
oto kiralama
kiralık oto
araba kiralama
minibüs kiralama
araç kiralama
kiralık araba
kiralık araç

Could not find the xobject named '3'.

i am using Adobe Acrobat 6.0 Professional, and HP scanjet 2400. but after scan display this error "could not find the xobject named '3'." not create pdf file. way.

Found this post when troubleshooting the error message "Could not find Xobject named '3'". If anyone else runs into the same issue when creating a PDF by importing from a scanner, my issue was a bad cmos battery that set the incorrect date. I changed the date and time to current and was importing PDFs again.

GP Preference Items Throwing "Could not find a part of the path" Error in GP Management Console

Hello,
For background, I recovered two Server 2008 R2 Domain Controllers in the same domain from a JRNL_WRAP_ERROR
using the BurFlags registry key as outlined in KB290762. The non-authoritative restore seemed to resolve NtFrs/replication challenges, as now the FRS and System logs are free from any major errors and "repadmin /showreps" output looks clean.
As part of the cleanup process I am going through and checking all the policy objects. Policy objects that leverage group policy preferences are
throwing an error when the settings are viewed in the management console:
The following errors were encountered:
An unknown error occurred while data was gathered for this extension. Details: Could not find a part of the path 'C:\Users\administrator.YOURDOMAIN\AppData\Local\Temp\2\ny0ho1ht.tmp'.
This occurs for existing Group Policy Preference objects and those that are newly created. It is important note if I go to edit the policy in question
the preference settings are available, it is viewing them in the management console that seems to be the issue. What concerns me here is that the file it is looking for is stored in the local temp directory and not the SYSVOL directory. With replication issues
behind me I am not sure how to address this last piece of the puzzle.
Any assistance in getting this squared away you be appreciated.
Thanks!
Jordan

DCDIAG /C outputs the following error in relation to the VerifyEnterpriseRefrences test:
Starting test: VerifyEnterpriseReferences
The following problems were found while verifying various important DN
references. Note, that these problems can be reported because of
latency in replication. So follow up to resolve the following
problems, only if the same problem is reported on all DCs for a given
domain or if the problem persists after replication has had
reasonable time to replicate changes.
[1] Problem: Missing Expected Value
Base Object:
CN=DC04,OU=Domain Controllers,DC=YOURDOMAIN,DC=local
Base Object Description: "DC Account Object"
Value Object Attribute Name: msDFSR-ComputerReferenceBL
Value Object Description: "SYSVOL FRS Member Object"
Recommended Action: See Knowledge Base Article: Q312862
[2] Problem: Missing Expected Value
Base Object:
CN=DC03,OU=Domain Controllers,DC=YOURDOMAIN,DC=local
Base Object Description: "DC Account Object"
Value Object Attribute Name: msDFSR-ComputerReferenceBL
Value Object Description: "SYSVOL FRS Member Object"
Recommended Action: See Knowledge Base Article: Q312862
LDAP Error 0x20 (32) - No Such Object.
I am evaluating the suggested KB now but am not sure it is related to the issue at hand but posted it for completeness.
All other tests pass.

Could not find installation information for this machine for lion

could not find installation information for this machine for lion after trying to reinstall lion ona new MacBook pro that come with lion

I guess Lion Internet Recovery has still some issues, maybe it's just my internet connection at home, but yesterday and this morning I was trying to restore Lion at home and the remaining time was of 54+ hours, and it never get to be less than 50 when it crashed..
I shut my computer down and headed to my office and once here, the remaining time showed as 1 and a half hour.
I finally was able to restart my Macbook Pro.
Maybe my router (at home), or mi ISP was blocking Lion Recovery tool or something like that... weird...
My last choice was going to take it to the AppleCare, it's good I didn't have to...
Thanks everyone!

Could not find Activity Tracing & Logging Console in EP

Hi All,
I have portal Admin rights and when I go to
<b>System Admnistrator>Monitoring>Portal</b>, I could not find
Logged on users, Activity Tracing, Logging Console in the Detailed Navigation. (but I could see and access Request Smmary, Request Overview, Component Overview, Thread Overview)
EP 6.0 SP11 is in use. Linux is the OS.
Does anyone know why I am unable to see all the iviews here.
Thanks for the help.
regards
suresh.

Hi Suresh,
In EP 6.0 SP2 these (logged on users, Activity tracing and logging console) options are available. But not available after that version. Only Request summary, Request overview, component overview, Thread overview are available.
Regards
Arun

I could not find network utility option in mavericks. i was using os x lion.there is a network utility option in utility menu.help me to find out the option in mavericks.

i could not find network utility option in mavericks. i was using os x lion.there is a network utility option in utility menu.help me to find out the option in mavericks.

Choose Go to Folder from the Finder's Go menu, provide /System/Library/CoreServices/Applications/ as the path, and open it.
(109612)

I have been unable to retrieve emails from my external disk. I entered the Time Machine and tried to go to April 2013, but could not find emails. I have Lion OS X 10.7.5 .Thanks!

I have been unable to retrieve emails from my external disk. I entered the Time Machine and tried to go to April 2013, but could not find emails. I have Lion OS X 10.7.5 .Thanks!
Cecilia

I have been unable to retrieve emails from my external disk. I entered the Time Machine and tried to go to April 2013, but could not find emails. I have Lion OS X 10.7.5 .Thanks!
Cecilia

Warning Messages - Could not find schema information for the element applicationSettings - App.Config of a console app

This is my app.config file
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
   <configSections>
   <sectionGroup name="applicationSettings" type="System.Configuration.ApplicationSettingsGroup, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
   <section name="IntelBrandFX.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
   </sectionGroup>
   </configSections>
  <appSettings>
   <add key="connStr" value="Data Source=tmvnasql1.tmvn.com;Initial Catalog=brandplan;Integrated Security=True"/>
  </appSettings>
  <applicationSettings>
   <IntelBrandFX.Properties.Settings>
   <setting name="IntelBrandFX_rollupViewerService_extract" serializeAs="String">
   <value>https://viewer.rollup.com/omdsp2008/extract.asmx</value>
   </setting>
   </IntelBrandFX.Properties.Settings>
  </applicationSettings>
</configuration>
And the Warning messages are
Message 1 Could not find schema information for the element 'applicationSettings'.
Message 2 Could not find schema information for the element 'IntelBrandFX.Properties.Settings'.
Message 3 Could not find schema information for the element 'setting'.
Message 4 Could not find schema information for the attribute 'name'.
Message 5 Could not find schema information for the attribute 'serializeAs'.
Message 6 Could not find schema information for the element 'value'.
Althought they do no hinder me from successfully running the project. these messages are annoying. I have seen many articles on the web but could nowhere find the exact schemas for that the above elements that I could add to the DotNetConfig.xsd file.
Could somebody give me an idea how to create xsds for the elements above and include in the dotnetConfig.xsd.
I understand what needs to be done but not sure of the exact way to do it.
Thanks,

You don't need to modify the dotnetconfig.xsd. All you need to do is generate an XSD for your section and let VS know where it is at.
1) Create your XSD using any of the various tools available or by hand.
2) Copy your XSD into the <VSDir>\Xml\Schemas directory.
3) Create a catalog file for your schema.
4) Restart VS and it'll load the XSD and give you Intellisense.
Here's the MSDN documentation for it: http://msdn.microsoft.com/en-us/library/ms255821.aspx
Michael Taylor - 8/18/09
http://p3net.mvps.org

Could not find the main class JRE 1.6 only with console program into Contro

Hi,
I want replace JRE1.5-11 with JRE 1.6.
Applet is running correctly with JRE 1.6.
But when i want launching Java program located into "Parameters/Control Panel"
I have following error message "Could not find the main class JRE 1.6 "
Regards
Philippe

i wouldn't report a nullpointer to sun unless you're fairly confident there's some sort of bug. if main() can't be found it sounds to me like a config issue. if nullpointer, sounds like a code issue. post the code if you want, but i don't think sun will help you debug this.

Reinstall OS x "could not find installation information for this machine"

Early 2011 MacBook Pro upgraded (on-line) from Lion to Mountain Lion.
Going to Rocovery Console (Command+R) during startup and choose "Reinstall OS X".
Clicking Continue in OS X Mountain Lion window, clicling contionue in
"To download and restore OSX, your computers'elidgilibility will be veryfied with Apple"
and got error:
Could not find installation information for this machine.
Contact AppleCare.
Well, when I retirn from the office, AppleCare is not working anymore.
Any idea what to do?
Thanks.

Singapore ISP Singtel is having issues with Apple Internet Recovery.
There is a need to add proxy access via port 8080.
Since I can't even get into Recovery mode, this info doesn't help.
So, I call up Apple hotline and explain the whole picture.
Was fortunate that Apple has similar feedback from Singapore user.
So, was told to just bring down Mini to service provider.
Problem solved some what.
Service provider only reinstate the ori OS X Lion.
Back home, I download and install ML.
This time, made a copy of ML installer in USB stick for future usage.
I guess the only way around this is getting someone to just install Lion or ML, if Internet recovery doesn't work.

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden

Lion 10.7.4 Console: Could not find image named 'ForwardArrow'.

Similar Messages

Maybe you are looking for