Lion 10.7 - Proper driver for Dynex eSATA Expresscard adapter?

I just upgraded to OS X Lion today, and I'm having trouble talking to my external drive with my eSATA expresscard adapter. (see link below)
http://reviews.bestbuy.com/3545/8682393/dynex-2-port-esata-ii-expresscard-adapte r-reviews/reviews.htm
The adapter is detected as a "Mass Storage Controller," but I can't get any connectivity with my external drive. Has anyone had success with this/any expresscard adapter? Back to good ol' USB 2.0 for the time being I guess...
Thanks in advance!

I can confirm that this driver (SLI 3132 ver. 1.2.5.0) is working for my Dynex 2 port e-SATA II ExpressCard Adapter.
(Link to Mac specific driver page)
I haven't done any super heavy lifting with it yet, but so far so good.
Will report back if I see any issues over the next couple days of use.

Similar Messages

  • Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

    Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

    I have the MacIntosh volume and the Boot Camp partition only.  I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive. 
    The tech at the Apple Store had a previous life as a MSCE and was very helpful.  I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard.  I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick. 
    I do not have another installation, so that is not an option.  I will try to create an external, I have plenty of hard drives around and see if I can get it done that way.  It might take me a week or two to get back to it, but I will comment back upon completion of that effort.  Thanks for your help....Dave Iverson

  • Apple Online Store is selling Lion on a Thumb Drive for $69

    Apple Online Store is selling Lion on a Thumb Drive for $69. Does anyone know the size of the drive and if it is a USB2 or a USB3 drive?

    There are also ways for YOU to put Lion on a Thumb Drive.  I did.  A lot cheaper than going this route.  Just make sure you follow the instructions people have posted AFTER you download and BEFORE you install Lion.  I also made a Lion install DVD just in case.

  • GX630 boot from esata expresscard adapter

    Hi,
    i have GX630 with non functional sata ports (sata working for 5min and after that not).
    Now i booting from USB, but this is little slowly.
    I read many topics about booting ssd card from expresscard slot, and it works, but its much expensive for me.
    Can i boot from esata expresscard adapter (adapter supports booting)?
    Can bios in GX630 recognize this sata adapter?
    Thanks for reply

    Hi and welcome to Discussions,
    the EFI and SMC updates are specific for each Mac model.
    Therefor trying to apply an EFI update made for the newer MBP to an older one would either not work (because the Installer checks the model) or, if it installs, surely crash your MBP.
    Don't try it !!
    Since the newer MBPs uses a different (newer) Intel-chipset on the logic board, it is most likely that the ability to boot from eSATA Express Card is not implemented on the chipset that is in your 'older' MBP.
    Sorry
    Stefan

  • I cannot install Lion to a backup drive for my new Mac Mini

    I just bought the new Mac Mini with an i7 processor last week. I wanted to format a backup drive for it. When I tried to use the Lion Recovery partition on the new Mac Mini, I keep getting an error message that says it's incompatoble with the current model.
    I also tried to use the Lion thumbdrive I purchased from Apple to see if that can be used, but it also give me the incompatible message.
    Is there a special version of Lion that's only for the new Mac Mini's?
    Any help is appreciated!

    Read this, it will explain it: http://support.apple.com/kb/HT4905
    Mac mini (Mid 2011), MacBook Air (Mid 2011): Use Lion Recovery instead of OS X Lion USB Thumb Drive
    Last Modified: September 01, 2011
    Article: HT4905
    Summary
    Learn about using Lion Recovery or the built-in OS X Lion recovery partition rather than OS X Lion USB Thumb Drive with computers released after OS X Lion.
    Products Affected
    MacBook Air (13-inch, Mid 2011), MacBook Air (11-inch, Mid 2011), MacBook Air (Mid 2011), Mac mini (Mid 2011)
    Use Lion Recovery to restore Mac computers released after OS X Lion. If you attempt to use the OS X Lion USB Thumb Drive, a message will appear stating that you cannot install this version of OS X on your computer. This is correct behavior to make sure you install only the correct and most up-to-date version of Mac OS X on your computer.
    Note: You can also use the Lion Recovery Disk Assistant on your Mac to create a bootable image to make sure you recover the correct version of OS X Lion. To use the Lion Recovery Disk Assistant, you need to have your own USB drive.
    Additional Information
    If you have a network connection, you should receive the appropriate version of Mac OS X when using the built-in Recovery HD partition on Macs running Lion.
    Learn more about Lion Recovery.

  • Help: XP driver for 3000 G410 wireless adapter

    Hi All,
    My recently bought g410 came with Vistra (only) drivers CD, while I'm installing winXP instead. I downloaded drivers from Lenovo website and everything worked except the winXP driver for "wireless network adapter" (all 3 of them: Gemtek, 3xxx, & 4xxx), the adapter was simply not recognized.
    When I look at g410 spec, it says something like "Wireless Network Type: InviLink 802.11BG", does it mean that it is another type of wireless network driver those available on Lenovo's site? If so, where can I get this driver? Can someone help, please?
    Thanks,
    fitro
    Solved!
    Go to Solution.

    Dear Silens,
    Have tried to install the vista driver for Gemtek, and YES, the wireless thing is working now! Thanks for the feedback.
    I notice that in the device manager, the device reads something like"Broadcom 802.11g" while from the specification, the wireless adapter should be 802.11bg (the letter "b" is missing from the description). I don't notice any performance issue though, however, would like to know if you have the same description as well?
    Dear Rex,
    I don't know how to start the system update software, do i need to download from any website?
    Thanks,
    fitro

  • Driver for USB Serial Parallel Adapter

    Hello,
    I have a ThinkPad X100e with Windows 7 pro and I would like to connect an USB Serial Parallel Adapter (IBM).
    My system don't recognize this device and I don't find a driver for it..
    Can you help me ?
    Thanks
    Have a nice day

    http://forums.lenovo.com/t5/Options-Accessories/Us​b-to-Serial-Parallel-adapter-drivers-FRU-41A4955/m​...
    Read the last post on how to install it. See if that works for you.  I used it on an x32 with 7 ultimate and I'm running an old printer off of it.
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Is there a driver for the thunderbolt ethernet adapter on a 2010 Macbook Air?

    The thunderbolt ethernet adapter is not being recognized on my 2010 Macbook Air running 10.6.8. Is there a driver for it?

    That's because there's no thunderbolt port on the 2010 MBair.  You need to buy the USB ethernet adapter.
    http://store.apple.com/us/product/MC704ZM/A

  • Lion and 32-bit driver for ISDN

    ADSL is not available in my area, so I use a Hermstedt WebShuttle II ISDN USB terminal adapter. Its 32-bit universal binary driver works perfectly with Leopard 10.5.8. Hermstedt shut down in 2007 and, obviously, its products are no longer supported.
    If I get a new Mac (with Lion), will the device work?

    Hi:
    You should be able to use all of the W7 32 bit drivers except the audio from the HP Probook 450 G0.
    DO NOT USE ANY BIOS OR FIRMWARE DOWNLOADS FROM THIS LINK
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359407&spf_p...
    For the audio, accept the agreement, download and install the first file on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...

  • Need proper driver for cd/dvd not working

    TOSHIBA SATELITE M45-S269  
    I saw a few different drivers in the download section related to sound/dvd but not sure which one is right. The two that I tried downloading were zip files full of hundreds of different files?
    I'm just looking for the right driver to reinstall to fix this yellow exclamation error next to my driver in device manager.
    Cant play music or game cd's properly anymore
    Thanks for any help

    Satellite M45-S269
    The optical drive is supported natively in Windows XP.
    Double-click it in Device Manager and tell us what Device status has. It's on the General tab of the Properties box.
    -Jerry

  • Please fix a proper driver for the Audigy 2 ZS Videoeditor, I'm tired of rebooting all the time

    For several months now, I have fought a battle against crackling and popping noise and I have not won yet. When booting up, the soundcard works and produces nice sound to my stereo receiver, but as soon as I start a new program or the screensaver starts the sound start sounding horribly with lots of crackling. The only way to fix it is to reboot but then after a while the crackling starts and it's back to rebooting.
    I have contacted support who advised me to update the bios, which I did. I have also tried several cleansweeps, finetuning of memory handling etc. Nothing works.
    I think it's about time to release an updated driver that works, because current version does not seem to work at all. I have seen on this forum that there are several others suffering from the same problem.
    Anyone has some other ideas?
    Thanks!

    For several months now, I have fought a battle against crackling and popping noise and I have not won yet. When booting up, the soundcard works and produces nice sound to my stereo receiver, but as soon as I start a new program or the screensaver starts the sound start sounding horribly with lots of crackling. The only way to fix it is to reboot but then after a while the crackling starts and it's back to rebooting.
    I have contacted support who advised me to update the bios, which I did. I have also tried several cleansweeps, finetuning of memory handling etc. Nothing works.
    I think it's about time to release an updated driver that works, because current version does not seem to work at all. I have seen on this forum that there are several others suffering from the same problem.
    Anyone has some other ideas?
    Thanks!

  • Windows: how do I update the device driver for my video/display adapter?

    Installed video drivers may not always support the functionality of the latest Flash Player.  If Flash Player does not function correctly, updating the video drivers to the latest available version is one of the first steps to try.  Below are instructions how to update the video drivers on Windows systems.
    identify the manufacturer and type of your video card
    open Device Manager: Start | Run | enter devmgmt.msc
    open the Display Adapters drop-down; this will show you the installed video card:
    identify the device driver version
    right-click on your display adapter entry and select Properties
    click on the Driver tab; this will show you the driver version and date:
    go to the device manufacturer's support site and download the latest driver
    NVIDIA cards: NVIDIA driver download page, or auto-detect
    ATI cards: ATI driver download page, or auto-detect
    Intel cards: Intel driver download page, or auto-detect
    Matrox cards: Matrox driver download page
    VIA cards: VIA Arena driver download page (redirects to 3rd-party download site)
    SiS cards: SiS driver download page, or auto-detect
    S3 cards: S3 driver download page, or auto-detect (option 2 on the download page)
    follow the instructions on the manufacturer's support site
    Note: some of the auto-detect utilities linked above will only run on Internet Explorer.

    Hello, 
    Please download and run the HP Printer Install Wizard from www.hp.com/go/tools
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • HOW TO RECOVER DELETED DRIVER FOR SOUND CARD & PCMCI ADAPTER

    Hi
    How to recover a mistakenly deleted drivers for Sound card, PCMPCI and Other controller on IBM thinkpad ;Type: 1709-AB1? please help
    Thanks

    Here.
    I don't work for Lenovo. I'm a crazy volunteer!

  • Vista driver for Aironet 350 client adapter

    I want to run a 350 client adapter on Windows Vista. does anyone have a driver ?

    Currently, neither the Cisco Aironet Client Utility (ACU) or the Aironet Desktop Utility (ADU) are supported on the Microsoft Windows Vista Operating System.

  • Please suggest driver for microsoft lifecam studio for to work with live stream procaster

    I have microsoft life cam studio using to broadcast live through live stream procastrer. I am using mac mini with mac os lion 64bit.But default driver for this studio cam is not supporting to go live with proper crop and quality settings. Can anyone provide driver for this camera ?

    Hi, no idea really, but perhaps see if this could work for what you want...
    http://www.google.com/url?q=http://www.bensoftware.com/securityspy/&sa=U&ei=QUGH T4z4K4WciQL436yGAw&ved=0CBEQFjAA&usg=AFQjCNEC9fzmWGOiPtM0kRHyzfST3Kh5jQ

Maybe you are looking for

  • Copy files from mounted pc volume to mac

    Hi all, I have a problem with the following script: var xmlfile = File.openDialog("Choose XML"); var result = File(xmlfile).copy("~/Desktop/" + xmlfile.name); This result is false (can't be copied) when the file is an a mounted PC Volume. (/Users/Pub

  • Can't Edit Template

    About a week ago I created a template and have made edits to it on several occasions. However, while working with the template today, I suddenly couldn't access any portion of the template that was not an "editable area". In other words, the template

  • Custom MAX9601 Model problems

    I build this model using maxim's spice file. But when tested in simple 100MHz sine wave circuit, multisim show error: "Singular matrix" and "time step too small". Better Mass Spec From 31º17'55.82" N,121º30'15.92" E Attachments: Max9601.prz ‏277 KB

  • My iphone4 devices is not showing bluetooth on/off button

    Bluetooth doesnt showing on/off button

  • Can a iPhone 6 in Hong Kong usable in Malaysia ?

    i'm wondering if i buy a iPhone 6 in Hong Kong on 19 September when it launches. Can the phone works with Maxis, Digi etc carrier in Malaysia ?