Lion and 32-bit driver for ISDN

ADSL is not available in my area, so I use a Hermstedt WebShuttle II ISDN USB terminal adapter. Its 32-bit universal binary driver works perfectly with Leopard 10.5.8. Hermstedt shut down in 2007 and, obviously, its products are no longer supported.
If I get a new Mac (with Lion), will the device work?

Hi:
You should be able to use all of the W7 32 bit drivers except the audio from the HP Probook 450 G0.
DO NOT USE ANY BIOS OR FIRMWARE DOWNLOADS FROM THIS LINK
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5359407&spf_p...
For the audio, accept the agreement, download and install the first file on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...

Similar Messages

  • Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

    Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

    I have the MacIntosh volume and the Boot Camp partition only.  I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive. 
    The tech at the Apple Store had a previous life as a MSCE and was very helpful.  I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard.  I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick. 
    I do not have another installation, so that is not an option.  I will try to create an external, I have plenty of hard drives around and see if I can get it done that way.  It might take me a week or two to get back to it, but I will comment back upon completion of that effort.  Thanks for your help....Dave Iverson

  • Windows 8.1 64-bit driver for Coprocessor on Mid 2009 Macbook Pro 5,4

    I have successfully installed Windows 8.1 Pro 64-bit onto my Mid 2009 Macbook Pro 5,4. The installer from BootCamp 5.0.533.5033 would not run, but I installed one-by-one the files under Apple and then ran the 64-bit nVidia installlers.  I have everything present and accounted for except for the 'Coprocessor.' 
    I have looked through the forums and everything seems to indicated that if you install the nVidia drivers it will install the driver for this but it doesn't.  Any thoughts/suggestions/solutions?

    For anyone who will find this post in the future, the Device Manager indicates that the 'Device Instance Path' is
    pci co-processor pci\ven_10de&dev_0aa3&subsys_cb7910de&rev_b1\3&21436425&0&1d
    Searching for that online, it appears that this is the nVidia MCP79 Co processor System.
    This driver did not install with version 306.37 that came with the BootCamp drivers.  I downloaded the current version from nVidia of 334.89 and that didn't work either.  I searched online and found a driver for an Alienware 17x that uses the same co processor and ran the installer which extracted the files for the nVidia chipset v. 15.57 for 64-bit Windows 7 and Vista to c:\dell\drivers\R273039 and pointed the Device Manager to this folder and it was able to successfully install the driver software for the Management Controller (drivers are listed under the SMU folder for the "PCI\VEN_10DE&DEV_0AA3" device).
    NVIDIA nForce System Management Controller
    I then proceeded to use Double Driver to backup the drivers in use by the system so that if I install Windows 8 on future systems I can use this rather than the round-about way of getting the driver installed on the system.

  • Windows 7 64-bit driver for Hp ENVY 15-q203tx

    can you give me windows 7 64-bit driver for Hp ENVY 15-q203tx.some our program and system is not working with windows 8.1

    Hi:
    See if the W7 x64 drivers and software from this model work on yours.  Don't use any BIOS or firmware files from this model.
    To install the graphics, you have to install the Intel chipset installation utility first and reboot.
    Then install the Intel HD graphics driver and reboot.
    Then install the Nvidia graphics driver and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=7200...

  • Existing 64 bits driver for PCI Synchro board Computer Conversions Corporation

    existing 64 bits driver for PCI Synchro board from Computer Conversions Corporation ?
    Thank's for your answer

    You will have to contact Computer Conversions Corporation for that information:
    http://www.computerconversions.com/ccc/index.html
    Microsoft does not produce the drivers for third party hardware.  That is the sole responsibility of the manufacturer.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Is there a 64 bit driver for an HP Laserjet 1000

    Hi,
    Is there a 64 bit driver for a laserjet 1000?

    http://h20000.www2.hp.com/bizsupport/TechSupport/D​riverDownload.jsp?lang=en&cc=uk&prodNameId=45675&t​...
    Say Thanks by clicking the Kudos Star. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    (Although I am an HP employee, I am speaking for myself and not for HP) I am not a expert on all our products, but I'll do my best to help you.

  • Where can i find windows 7 64 bit driver for macbook pro 8,1 ?

    Where can i find windows 7 64 bit driver for macbook pro 8,1 ?

    Boot Camp Assistant 4.x in Lion
    Apple Boot Camp Support

  • Apple Online Store is selling Lion on a Thumb Drive for $69

    Apple Online Store is selling Lion on a Thumb Drive for $69. Does anyone know the size of the drive and if it is a USB2 or a USB3 drive?

    There are also ways for YOU to put Lion on a Thumb Drive.  I did.  A lot cheaper than going this route.  Just make sure you follow the instructions people have posted AFTER you download and BEFORE you install Lion.  I also made a Lion install DVD just in case.

  • [SOLVED] Use the nouveafb as framebuffer and the nv driver for Xorg

    Hi! I'm using Arch on a JAMMA Arcade cabinet (one of those old arcade cabinet) so i need some strange video resolution to suit my needs.
    The best option is a 640x240 @ 60Hz vertical and 15Khz horizontal. Arcade screens must have an horizontal frequency of 15Khz or I'll fry my screen! Luckily i use a card called J-PAC that cut off the video signal if is not 15Khz.
    With Xorg there's no problem if i use the nv driver, using this Modeline do the trick:
    # 640x240x60.00 @ 15.240kHz Perfect screen mode for Xorg
    Modeline "640x240x60.00"  12.192000  640 656 720 800  240 244 248 254  -HSync +VSync
    I've found this modeline using a little program called umc: http://aur.archlinux.org/packages.php?ID=27550
    Instead Xorg crash randomly if I use the same modeline with the nouveau driver, sometimes at startup, other times during the Xorg session. I use some "no edid" options that let me use strange video resolutions but i don't know if this is bothering the nouveau driver or not, surely it isn't bothering the old dear nv driver.
    BUT WAIT!!!!
    The nv driver can be loaded only if the nouveau driver is not loaded!
    So if I use the nv driver for Xorg i lose the nouveafb, and the nouveafb is the only one that works for me 'cause i can't force a non standard video resolution like 640x240@60hz on vesa and uvesafb! At least this is what i've learned from the docs, tell me if i'm wrong: http://git.kernel.org/?p=linux/kernel/g … vesafb.txt
    For now the only thing that make the framebuffer works at 640x240 is this: video=DVI-I-1:640x240@60eMm but this kernel command works only with KMS and the nouveafb.
    So my question is, can i use the nouveau driver for framebuffer only ? and the NV driver for Xorg ?
    Or there is another approach ?
    I remind you that i need a resolution of 640x240 both on the framebuffer and on Xorg, i'm using an old GeForce4 Ti4600 that is supported by nouveau (chip NV20).
    Thank for your patience and your time. 
    Bye for now.
    Last edited by marcs (2011-06-28 12:05:13)

    Hi
    It seems (well for now all is stable)... that now I got a more stable situation loading the nouveau module directly from initramfs.
    I'm guessing that now this is the solution, is the only thing i've changed, now fbsplash works also on start. (yay!)
    For solution documenting, you can do the same doing like this:
    1. edit the /etc/mkinitcpio.conf file with nano, vim or whatever.
    2. Add at the MODULES="" the nouveau module like this: MODULES="nouveau"
    3. Add the modprobe.conf file to the FILES="" line, like this: FILES="/etc/modprode.d/modprobe.conf"
    4. OPTIONAL: If you are using fbsplash like me you must add at the HOOKS also the fbsplash script like this: HOOKS="base udev fbsplash ..." : look here: https://wiki.archlinux.org/index.php/Fbsplash
    5. OPTIONAL: On an arcade cabinet the best text font must be tiniest possible like an 8x8. I'm using cp865-8x8 wich is much better than Agafari-16 that is good for high resolutions. To use this console font as soon as possible you can add also consolefont to the HOOKS like, like this: HOOKS="...[stuff before] consolefont"; look here: https://wiki.archlinux.org/index.php/Fo … fault_font.
    6. Then you must remake the initramfs images doing this: mkinitcpio -p kernel26 (or whatever kernel you wan't to use as a model, i'm using kernel26-fbcondecor).
    To use fbcondecor, you can find the kernel26-fbcondecor package from AUR: http://aur.archlinux.org/packages.php?ID=15603 (please support this package)
    Xorg seems very stable for now. I'm using the nouveafb framebuffer with fbsplash on an old arcade cabinet and that's some fine eye candy man!
    PROBLEM SOLVED!
    BUT WAIT!!!
    I have to know now what's the difference between loading nouveau from initramfs... I don't know if the problem is related to nouveau or KMS or fbcondecor, or fbsplash, or the kernel I'm not so good to know that.
    Now can any kernel guru tell me what is the basic difference by loading a module from initramfs instead making the kernel load it, a part the fact that is loaded a bit earlier from initramfs. There are also difference between memory areas ?
    I'll send a bug report and how to reproduce it, but i guess that my configuration is a bit out of the mainstream...
    Thank to anyone that have taken a look at this post.

  • Windows 7 64 bits driver for hp colour laserjet 2840

    Where to find Window 7 64-bit driver for HP Colour LaserJet 2840 all-in-one printer full complete version?

    Hello B-I-F,
    The drivers for the HP Color Laserjet 2840 are already "built" into Windows 7. Here is a link regarding how to install them:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
    Also, for future reference, the HP Color LaserJet 2800 All-in-One Printer series are commercial printers. I recommend posting in the forum for HP Business Support for a better chance at finding a solution.
    Here is the link to the Commercial Laserjet board:
    http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
    If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

  • Windows 7 64 bit driver for the Zen Vision M?

    - Where EXACTLY can I find the Windows 7 64-bit driver for the Zen Vision M? My new computer came with it installed in Windows Media Player 2, but the driver became corrupt. I can't seem to find that driver on the Creative or Microsoft download websites. Please Help!

    The driver is nati've to Windows. Creative does not write the MTP driver. I would suggest re-install WMP2 or contact Microsoft for advice if it is corrupt. As for software to use the player on a 64 Win 7system? there is nothing for the Vision M. You may want to read this page? http://support.creative.com/KB/showarticle.aspx?sid=605&h=3

  • How to scan my computer and external hard drives for pictures with out importing duplicates.

    how do i scan my computer and external hard drives for pictures with out importing duplicates.

    iPhoto doesn't scan anywhere. It imports files offered to it. If it spots a duplicate it will warn you.

  • I have just installed Lion and the text window for the web address in safari has disappeared.  Anyone know how to get it back?

    I have just installed Lion and the text window for web addresses in safari has disappeared.  Any ides how to getit back?

    Select Customize Toolbar from the View menu, select the item and drag into the toolbar. Place where you want it to be.

  • 64 Bit Driver for MSI GeForce NX6800GS-TD256E

    I need a 64 bit driver for MSI GeForce NX6800GS-TD256E.
    Any idea where can I get it as I can't even find it in the official site.. Or MSI GeForce NX6800GS-TD256E does not support 64 bit?

    DreamKid,
    Download the latest nVidia ForceWare Drivers
    Take Care,
    Richard

  • How to install Windows 7 64 bit driver for Canon i9100 Printer?

    When I try to install my Canon i9100 printer on my HP laptop running Windows 7 Professional 64 bit, Windows cannot locate a driver.  Visiting the Canon website, I find an update module for the Windows driver.  Canon says the printer MUST be installed using Windows Updater before their driver update can be installed.  I have tried everything, but I cannot get Windows to find a driver.  Windows Updater says that my computer is Up To Date.
    What am I doing wrong?
    Thank you,
    David

    Hi Honeycutt,
    The Windows 7 driver for your i9100 is only available from Microsoft through Windows Update.  Please try Microsoft's web page for assistance with troubleshooting this:
    http://windows.microsoft.com/en-us/windows7/find-and-install-printer-drivers
    If you continue to have difficulties, please contact our support group using the following link:
    http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Maybe you are looking for