Lion: big problems with the network!

Since updating to Lion, I am experiencing difficulties with the network. My Kyocera task alfa 2500 cannot communicate properly with the Mac: it does print but cannot send scan to the Mac, it is just impossible for the printer/scanner to find the Mac. I hear it could be a problem with FTP which is not supported by the new OS Lion. How can I solve the problem?? Or is Apple going to resolve this problem????

Well, the problem relates to the Rosetta program eliminated by Apple in the Lion OS. When you try to rum the KM Scan to Mac.app you get:
"You can't open the application KM Scan to
Mac.app because PowerPC applications
are no longer supported."
So, I guess we (I encountered the same problem) will either have to wait out Kyocera-Mita for a scanner driver app, attempt write a new KM Scan to Mac.app for the Intel Macs; wait for somebody else to WRITE a new KM Scan to Mac.app for Intel Macs or just ***** about it.
Not a rosey situation.

Similar Messages

  • I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

    I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work

    Hello, Toro Silva. 
    Thank you for visiting Apple Support Communities.
    The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue.  Make sure to create a current backup prior to processing these steps.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Cheers,
    Jason H

  • Is there problems with the network/signal in TA3 Taunton area

    Is there problems with the network/signal in the TA3 Taunton area I have not had a signal all day and then to make contact with one of my children regarding school pick up.

    Unfortunately so. Spoke to EE today and the service may take up to 72 hours to get back to normal - which is unbelievable given how much we use our phones for day to day life! As they cannot do anything for us, to thank us for our patience they are asking us to monitor when the service resumes and get back to them (no doubt on their £ per min line) and let them know and they’ll credit us for the down time. Just Brilliant!!     

  • MOVED: Big problem with the bios

    This topic has been moved to BIOS.
    Big problem with the bios

    You're not alone... https://discussions.apple.com/thread/3391947?tstart=0

  • The problem with the network card.

    The problem with the network card.
    My laptop HP Pavilion dv7-1260ew network connection breaks .
    NIC is to blame .
    On that card could replace the old Intel 5100 to work with the network as a standard N.

    Pawełek wrote:
    The problem with the network card.
    My laptop HP Pavilion dv7-1260ew network connection breaks .
    NIC is to blame .
    On that card could replace the old Intel 5100 to work with the network as a standard N.
    This confusing which one are you asking about?
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • The network backup disk could not be accessed because there was a problem with the network username or password.

    Hardware Information:
              MacBook Pro - model: MacBookPro6,2
              1 2.66 GHz Intel Core i7 CPU: 2 cores
              4 GB RAM
    Video Information:
              NVIDIA GeForce GT 330M - VRAM: 512 MB
              Intel HD Graphics - VRAM: 288 MB
    Startup Items:
              HP Trap Monitor - Path: /Library/StartupItems/HP Trap Monitor
    System Software:
              Mac OS X 10.6.8 (10K549) - Uptime: up 0:0:48:37
    Disk Information:
              TOSHIBA MK5055GSXF disk0 : (465.76 GB)
                        (null) (disk0s1) <not mounted>: 200 MB
      MacBook Pro HD (disk0s2) /: 465.44 GB (440.47 GB free)
              MATSHITADVD-R   UJ-898 
    Have tried…
    re-setting Time Capsule (soft and hard) and power disconnect
    re-setting modem
    changing passwords in all relative locations
    deleteing file://localhost/Library/Preferences/com.apple.TimeMachine.plist
    deleteing all mention of Time Capsule in Keychain Access
    running KeyChain First Aid (no problem found)
    Restarting computer
    Time Capsule has a green light, other MacBook Pro backs up OK but this machine continues to receive above error message and will not Enter Time Machine producing the error message Your Time Machine backup disk can’t be found. Maybe I need to do something over or in a particular order? All help is appreciated!

    With the TC plugged by ethernet into the computer.. still in full isolation to the network and with factory reset.. you can do another to be sure.
    Please open the network preferences.. and check the IP the ethernet is getting from the TC.
    It should be 10.0.1.2
    I set it to this manually
    Don't worry about all the rest.
    If you open airport utility can it see the TC?
    YES
    If not then I think you have a major network issue on the computer.
    Assuming you can see the TC in airport utility.. go to manual setup and the disk tab. Does the disk register any issues.. SMART should show it has verified.
    Shows verified
    Now go to finder..
    Mount the drive manually via the top menu.. Go.. Connect to server.
    And type in the address.. SMB://10.0.1.1
    Did NOT work, however 10.0.1.2 did
    That should discover the drive and ask you for credentials which after a factory reset will just be public as the password. The drive should mount and you can then see it in finder.
    Yes, but I have been able to do this with the IP address being set automatically
    I would deliberately use SMB. The other alternative is AFP://10.0.1.1 but that seems to be more problematic at times..
    Once mounted point TM to the drive and see if it can find it and start the backup.. if it fails I think you have need to use the A5 in pondini's troubleshooting and see what you can do.
    It failed and A5 makes NO difference.
    A drive that won't mount is obviously not going to work.
    Pondini is welcome to make comments... sometimes my Mac terminology gets a bit loose.. !! My recent convert status is visible .. !!
    My other solutions.. since these are fairly old products.. the TC is more than 3years in all likelihood so outside warranty.. get a USB drive and plug it into the Mac and use TM to backup to that. If that works.. I would erase the hard disk in the TC and start over with both computers.. you will need to backup the other computer before you erase of course. Erasing and starting over does seem to help.
    If there are no other suggestions, I guess I will try erasing and starting over. Thank you both for ALL your advice.

  • Problem with the network (streaming-mirroring)

    Hello guys, im really new in this whole posting my questions so hopefully im doing it right.
    I have a Apple Tv 2nd gen  and it was working like magic untill i changed my network.
    I used to have severall routers which meant several networks (more or less) but when i bought the new equipmens I had the great idea to have only one router (Linksys N6500) and a access point that i used as a repeater (TPlink TL-wa901nd) the network works great for the AppleTV and the computers but when i try to mirror or stream any content my computer says that the AppleTV does not exist in the network some times and others it does but when i try to stream it, dissapears.
    My guess is that the AppleTV and the computer are connecting to different access points (computer to router - Apple Tv to AP or reverse) and therefore not finding eachother, and i have been trying everything to make them encounter eachother and then stay like that (they miss eachother alot ).
    Any opinions
    Thanks in advance...

    Connecting to different base stations shouldn't be a problem providing your network only has one DHCP server. Have you set your second router up in bridge mode.

  • A problem with the network adapter, help please

    I have an hp touchsmart pc 600 1040uk and today i woke up to find that the network adapter (nVIDIA) dissapeared and no local area connection. Also i can not connect to the wireless network
    I tried everything starting by restarting my router then removing all the cables and retarting the pc. Also tried adding a new device and everything didnt work. I even restored the pc to the factory settings and after starting over new still there is no local area network, just the wireless and bluetooth adapters and the wireless did not connect
    Another problem is that when i restored the pc to factory settings the recovery program asked me to backup my pc and I did the backup and saved it in an external hard disk, and now I cant restore that back coz it dosent appear in the window of backups to restore
    Plllllllllllllllllllllllllllllllllllllllllease help me, thanks

    I found this on another post by "Scott", and it worked. 
    http://support.apple.com/kb/TS2048?viewlocale=en_US
    Sure did take some searching to get to the answer.

  • HT6195 Big problem with the last security update, how can I solve the problem?

    Yesterday I installed the last system update in my secondary computer, a Macbook Pro (OS 10.8.5, if I remember well), from that moment is impossible to restart it. How can I solve the problem?
    Today Apple is worst than Windows, but is considerably more expensive! I am seriously considering to change to Windows, in less than 3 months I had serious problems with two Apple computers and I changed 4 computers (always Apple) in less than 6 years.

    tmjavier,
    feel free to use whichever operating system best suits your needs. Since this is a user-to-user forum, whether you use OS X or Windows will affect no one’s bottom line here.
    Regarding your MacBook Pro, you can try booting it into Recovery mode by holding down a Command key and the R key as it starts up. Once the  OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk’s boot partition (typically called “Macintosh HD”). On the right-hand side, press the Verify Disk button if it’s not greyed out; if it is greyed out, or if it reports that errors were found, press the Repair Disk button. Once the verification/repair is completed, exit Disk Utility and select Restart from the Apple menu to restart in normal mode. Is it able to reach the login screen now?

  • Big Problems with the Serial Port

    I'm Spanish and my English is not very good, I'm sorry but I need your help.
    I want to connect two computers (my desktop and my handbook) with the serial port (COM2 in both sides).
    I have the cable.
    I have installed JBuilder 7 in both computers.
    I have installed "commapi"
    I'm running SimpleWrite.java (the example from Sun) in one of them and SimpleRead.java in the other.
    I don't get in any moment receive any data.
    I execute first SimpleRead and I can see what this process is waiting something. After, I execute SimpleWrite (many times), this process star and stop correctly but never the first aplication receives nothing.
    I am trying for four days, I am desespereted.
    I need your help is very important to me. I don't understand what is happening!!!!. This is my e-mail: [email protected]
    Thank you very much.
    NOTE: my handbook has just one serial port, before had a winmodem but it was eliminated.

    hi,
    when your notebook has only one port, how do u know that this port is COM2? I think u gave a wrong parameter for the SimpleReader or SimpleWriter so one send data to a port (say COM1) but the other receives data from another port (say COM2).
    regards,
    eedych

  • Problem with the network

    sorry for my inglish  :oops:
    1.- i install the base system and then rp-pppoe
    2.- run adsl-setup and the user name, passwd
    3.- i try adsl-start but time out
    4.- try modprobe 8139too but time out agin
    what i can do ????
    the version is arch0.5.

    im using 0.5 because i don´t have enouth time for download the last version 
    about the problem, add that in rc.conf, "8139too", and "alias eth0 8139too" in modules.conf, but, nothing hapend 
    the time outis when try with "adsl-start", if try with "/etc/rc.d/adsl start" then BUSY, "/etc/rc.d/adsl stop" FAILED.
    only with gentoo(give up) and now arch happend this problem  :?

  • I have a problem with the network on iphone 3gs, even when I can not call you ring someone

    bejtush.k

    If I understand correctly, you are in Romania and the phone was bought from Sweden.  In order to unlock that device, you have to have the carrier in Sweden unlock it.  If your phone just won't power on, then wjosten has provided the steps needed to try and power it on.  Otherwise, if you want the phone "unlocked" or if it has been "jailbroken" or an unauthorized version of software has been put on the iphone, nobody can help you here. 

  • HT1414 I am unable to install a newer version for my Iphone 4S error tells me something was wrong with the network?

    I am unable to update my software to a newer version.  I keep getting an error message stating there is a problem with the network?  I am using my verizon internet service to update and it's not letting me?

    Are you doing through the phone, or itunes? What version of ios are you running now?

  • Problems with the postal code in address iview ESS.

    I would greatly appreciate if someone answer this threat. I am having this big problem with the address iview. It is not possible to change the postal code in the address iview.

    Can you explain the issue? Means for which country this issue is coming. We faced similar issue. There is some bug in ESS/MSS package itself. You send me details of issue at [email protected] I will reply you back with OSS message answered by SAP if that is a bug.

  • Problem with the synchronization by Desktop Software (6.1.0.35)

    Hi, i have a big problem with the  synchronization by Desktop Software (6.1.0.35).
    When I installed DS i set to folder sync photos not as
    ... Documents / BlackBerry / photo (created by default),
    but i chose
    ... Documents / Pictures / Photos from the BlackBerry (created by me).
    Basically now I try to change the import folder of images, but it appears the error that is
    "Can not set a folder to import to a higher level of import folder"
    I tried deleting / Photos from the BlackBerry, and not finding my DS it says:
    "The import folder is not available ... etc.." and tells me to change it or with the button or the Media tab of the Device menu> Options.
    I do it but the message is always the same: "Unable to set a higher level of import folder to import folder"
    I find it an absurd bug and ask to help me solve it. Thanks

    Well folks. I've had enough.
    The 9780 is a great phone, it's easy to use, practical and dependable. However, the Desktop Manager software has been giving me too many sleepless nights. On two occassions I must add: once at the end of last year when I bought it and only managed to solve it by myself after 4 weeks of trawling through online forums, blogs and other BB help sites and the recent one was last week when I tried to install it on my new Windows 7 notebook.
    I know this is not entirely the fault of RIM, Microsoft also has a part to play. But considering the state of technology these days, it shouldn't have to be so difficult. I want a phone and software that makes my life easier and not have to be a slave to it by trying days and nights to solve its problems.
    Hence, I have officially decom my phone and gotten an iPhone 4 instead. The switch ain't that difficult for me as I have always been platform neutral. As long it fits my needs, does it job well and doesn't give me too much headache, I'm cool with it.
    Ciao folks!

Maybe you are looking for

  • How to refer java class in c++

    Dear All, We have the requirement to access one java class from c++ program. Please share your ideas which will take me towards the right direction. Thanks in advance

  • Exporting symbols

    I have graphics symbol that were created in an other flash file but that I am reusing in a new project I have done that several times without problem but now everytime I export it the original bitmaps don't appear in my render (the graphic symbols ar

  • Why can't I order prints anymore through iPhoto?

    for years now i have ordered 4x6 photos for my albums at home. i just tried to order quite a few and noticed that under "share" the "order print" button is gone. What happened to it? and will it be coming back?

  • File type on Yosemite iCloud drive

    Hello, before upgrading to Yosemite, I want to check what file types I can use on iCloud drive. I work a lot with Sketchup and Layout, it would be great if i could keep the files on Drive and then work on them on either my MBP or my iMac. Presumably

  • App World -- unable to download paid applicatio​ns

    I'm a curve 9380 user from Turkey. I recently tried to buy an application from the App World. There was a error message: "There was a problem connecting to the payment system. Your transaction has not been processed. Please try again later (Error Id: