Lion can't see Time Machine drive that Snow Leopard does

We just set up a backup system for our group. It's a 8 Tb Pegasus drive attached to a Mac Mini Server. I have set up 4 Macs running Snow Leopard with no problems at all. Two systems are running Lion and I can not get Time Machine to see the backup drive. We are connecting via AFP on a network.
Any ideas or remedies? Thanks!

If I'm understanding correctly, your 4 SL machines work fine with the drive. Your Lion machines do not seem to able to see the drive in TM.
But your Mini server is a Lion server correct? It can browse and backup to the Pegasus on its own right?
The link Linc cited is related to an issue with older storage devices that use legacy AFP and no longer work properly with Lion machines. Even if the legacy is enabled you can only browse the drive and can set the drive for TM, but will not be allowed to use it for TM (TM errors will say as much). But this Promise Pegasus? is a brand new Thunderbolt using product entirely which subsequently makes me think that can't be the case at all.
Random thoughts:
How about LAN traffic firewall? Any chance you have the AFP port blocked internally?
I briefly flipped through a manual on the Pegasus... and it doesn't even offer any hints on time machine or shared usage. I guess there isn't anything particular on the disk side to do besides plug it in and the disk arrangements.
OS side... buggy sharepoint setups? TM usage is a selectable function for any particular sharepoint. I'm not sure how you are setting it, but have you tried to create a sharepoint on the Pegasus (a folder stored on it and not the root) and share it out with TM allowed? You should be able to see that at least.

Similar Messages

Can't see time machine drive and can't boot

Last week the internal hd on my Mac mini (mid-2010) began failing. I took it in and AppleCare replaced the drive. The genius told me they loaded 10.7.3 and I should be able to use Time Machine (TM) to bring it all back. So I go home, plug in my TM drive and the Mac can't see the drive the TM is on. And yet I know it recognizes the drive because if I turned it off it would give me the nasty warning about disconnecting before unmounting. So not knowing what to do I went and popped in the installation disc that came with my Mac mini (10.6), and booted with the cd. I told it to restore from TM, and this time it sees my drive and transfers the data. When it restarts I get the gray screen with a null (not permitted) sign. So I can't make heads or tails of it an decide that maybe I have to make a clean install and then upgrade to 10.7.4 and then try time machine (I'm grasping at straws now). Only when I attempt to to restart after installing 10.6 it go from a gray screen to a blue screen (of death) and just sits. I'm baffled and don't know what to do. Could my time machine disk, which was backing up a failing internal HD, have been bad? What do I do?

Hello:
If I were you (and I am not), I would bundle up the repaired computer and your Time Machine drive and take it in and ask the Apple person to bring it back to life. IMHO, that should have been done the first time.
Barry

After Kernal Panic can't see Time Machine Drive

I have a usb iSub speaker.
Apparently it is NOT compatible with Leopard but I have been following certain threads with interest as I hate to sell it just yet.
Yesterday there was a post that said if you go into Audio MIDI Setup and change some settings, then change them back- your iSub will work!
Well when I was in the Audio MIDI Setup utility I experienced a kernal panic (first since using Leopard)
After that I was not able to boot past the Grey Apple Screen.
I even left it overnight and it would not start.
I finally reverted to my old Tiger backup external drive- I booted to that, then started my Tiger DVD,
I ran Disk Utility, then Repaired permissions and I am back up and running.
My Time Machine hard drive is not showing on my desktop though! (I have 2 external drives- one is my old Tiger cloned back up with SuperDuper- the other is my TimeMacine backup)
I tried looking for it with DiskUtility but it is not seeing it either.
Any advice would be helpful at this point.
One other thing...it seems to be writing....the case the hard drive is in has lights on it and it is blinking..and I can hear it slightly.

Hello:
If I were you (and I am not), I would bundle up the repaired computer and your Time Machine drive and take it in and ask the Apple person to bring it back to life. IMHO, that should have been done the first time.
Barry

Migration Assistant in Lion won't recognize Time Machine backup from Snow Leopard

I just got an iMac with Lion. I am trying to use the Migration Assistant to move my files/apps etc from a Time Machine backup to the new computer. The MA will not recognize the backup drive - (external firewire 800). I can see the backup drive on my desktop but it does not show up as an option to choose in the Migration Assistant. Any idea what might be wrong. The backup is from an iMac running Snow Leopard and all the system software was last updated on Dec 9th. It think it is as current as I could get with Snow Leopard. Any ideas what is wrong?
Thanks,
Chad

This happened to me after hard drive replacement under the Seagate Drive Recall at the local Apple Store. Here's what I learned from the process:
I Wagged the Mac home, fired it up (with naked OS installed at the Apple Store), and it wouldn't see my Time Machine drive with Setup Assistant - not on firewire 800 nor USB. Just a grey spinner that lasts forever. When I try just continuing anyway, it offers me something that looks plausible, but then puts up a dialog about duplicate user name, and no matter what I enter, it always says "that user already exists". So I think - maybe Migration Assistant. Complete the setup, create an account, watch the nice welcome movie. BAM - there's my Time Machine drive on the desktop. OK - it has to work . . . but no. Same behavior in Migration Assistant, plus the new OS offers to start making backups on my Time Machine disk - it's not recognizing it at all.
So - back to the Apple Store - let the genius figure it out. It turns out there are multiple problems. First, the "genius" who imaged my new machine picked 10.7.2 but my machine had 10.7.5 - turns out, it's not enough just to have right cat. Even a point release older OS may not recognize a newer Time Machine drive. The guy at the desk said "We have images of everything but the 10.7.2 has free iLife in it, so they like to use that one". What the heck? They don't image what you had originally as a matter of sane process?
Having figured that out, we re-image 10.7.5 at the store thinking we've fixed it. But no - Setup Assistant still won't see the Time Machine drive. Not on USB, not on Firewire. Not in a box, not with a fox.
So here's the second trick - newer machines have a recovery partion. see: http://www.apple.com/osx/recovery/ Boot with the option key held down, pick that partition, then you'll get a "system restore" option, to restore your whole system from a Time Machine backup. My drive was recognized by the recovery partition restore process when neither Setup nor Migration Assistant would. Obviously, there's something broken in Setup/Migration Assistant.
Takeaway:
- if you're getting a drive replaced by Apple, make sure they image *exactly* the same OS
- if Setup Assistant fails, use the recovery partition for system restore
- Use Recovery Disk Assistant http://support.apple.com/kb/DL1433 NOW to make yourself a recovery thumb drive just in case. With Apple's new "no media" approach to the OS, you're hosed without it.

Mac Pro early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb and Raid card Raid5 them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

On my Mac Pro, early 2008 2 x 2.8GHz Quad Core 10.7.5, replaced 4 x 500ghds with 4 x 3Tb. The Raid card Raid 5ed them OK but can not load time machine back up as it does not see any of the 4 drives, neither does disc utilities, any thoughts?

You don't see drives when using a hardware RAID only the volumes.
WD Green are not suitable for hardware RAID (or software RAID for that matter).
USB2 and TimeMachine are a disaster waiting to happen. I've used SATA (internal) and eSATA (using SATA PCIe cards) trouble-free.
I can't say I begin to understand your use or "choosing the install drive for the backup"
Install what?
You don't load TimeMachine. Maybe seems minor but that is not how to describe the behavior of software.
You read FAQ and How To http://www.apple.com/support/timemachine
Time Machine’s Gory Details:
https://www.apple.com/support/timemachine/
TimeMachine 101
https://support.apple.com/kb/HT1427
Lion Recovry & TimeMachine
http://www.apple.com/support/lion/installrecovery/
http://www.apple.com/support/lion/
How To Restore Your System
http://pondini.org/TM/14.htmlMac OS X v10.7 Lion
Pondini's Blog: Time Machine - Troubleshooting -- B5. Would you like to inherit (or re-use) the backup . . . ?

I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Is it possible to go back in time with Time Machine and reinstall Snow Leopard. Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?

I have a mid 2010 Macbook Pro running Snow Leopard and foolishly upgraded to Yosemite. Now have numerous problems. Is it possible to go back in time with Time Machine and reinstall Snow Leopard? Then upgrade to Lion or Mavericks? Any other ideas on how I can exit Yosemite?

Once you get yourself back to Snow Leopard, if you still want to upgrade somewhat, I would suggest the following:
1. Get an external hard drive that you can use for experiments with new OS versions. You could partition it into 2 or 3 partitions. You could then clone your existing Snow Leopard system to one partition using Carbon Copy Cloner (well worth $40) or SuperDuper ($25).
2. Buy OS X Mountain Lion for $20, through the Apple online store (I don't think it's available through the App Store). Apple has decided to make it very difficult for anyone to get Mavericks unless they have already downloaded it.
You will receive two e-mails from Apple, one containing a PDF with a redemption code, and one with the password you will need to unlock the PDF. Using the code, you will download Mountain Lion from the App Store, where it will appear among your Purchased items.
After ML finishes downloading, its installer app will launch itself. When you see this launch screen, QUIT the install app immediately! Go to your applications folder, find the Install OS X Mountain Lion app, and copy it to a safe location outside of your Applications folder. Keeping one or more copies will allow you to reinstall without unnecessary aggravation if you later need or want to do that. At this point, you can re-launch the Installer in the Applications folder and let it run. You can install it on a clean partition on your external HD, or you can allow it to upgrade the Snow Leopard clone you created on your external drive, or you can do both. This should allow you to test how everything works for as long as you like.
3. If you left yourself a free partition on your test drive, try a clean install of Yosemite and set everything up from scratch (do not migrate anything). This will allow you to see whether your problems with it were related to something in your Snow Leopard system.

Can i do a time machine back to snow leopard from Lion?

After hearing lots of good and bad about Lion, i've re-considered paying the 29 and doing an upgrade. Mostly because of the full screen two finger swipe feature.
would you agree that feature alone is worth the upgrade?
if i didn't like it, could i do a time machine back to snow leopard no problem? I don't have any installation discs.
Thanks for your feedback.

Lion has lots of good features, but the trouble is it has lost nice features too. You can ONLY tell what you think after a week or so of use.
"Going Back To Snow Leopard" is a LOT of work - you will have to use the DVD install disk that came with your computer to erase Lion and install SL from scratch. That means saving your valuables in SL first (Time Machine or some other external drive export like Carbon Copy Cloner). It takes hours of your day, but can be done.
Lion needs a lot of care (adjustments) to make it behave the way you like it - it is REALLY different at first, but there are ways to make it behave a LOT more like SL by tweaking options in System Preferences and so on. It also takes hours to index - leave your machine on for 24 hours after you first install Lion - it will speed up a lot quicker that way.

Macbook air can't see time machine?

macbook air can't see time machine?

Can it see the external drive? Look at Section B
Time Machine Troubleshooting

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work. Help?

I just restored my 13" MBP i5 at the apple store to the newest version of Lion after issues with a previous Time Machine backup from Snow Leopard- this time I created a new account and just ported files and folders, and now MS Office doesn't work.
^^ that's the main problem. Here's the full history.
I bought a new 13" i5 MBP, early 2011 edition. I had an old white Macbook 2.14 ghz core2duo on Snow Leopard. I attempted to port over my time machine backup, but encountered problems in that my User was inaccessible from the new computer after the import finished, and I had to go in and change the root password, etc, and for some reason or another, I couldn't install any programs at all from that administrator's account. By "couldn't" I mean I could install them, but upon installation they would never boot. So, I took it to the apple store and did a clean install from the most up to date Lion OSX. Then, I created a brand new admin account, instead of trying to import the old one, and things seemed great. Then, I just imported my old files from the TM backup, but not any system settings, permissions, or user data. Just my Docs, pics, vids, apps, and itunes stuff.
Here's where things get weird again. I imported this stuff under the name "old", but all of these folders have a red negative sign on them, marking them as restricted. So, from my main admin account, I cannot even peruse these folders. Since I didn't import user data, I can't sign in to the "old" account to change permissions. I already tried to change the permissions from system preferences, but that didn't change anything. And now, for whatever reason, of all the apps that were imported then, MS Office is the only set of apps that does not work. When I click on it, it just says there was a problem and asks if I'd like to send a report to apple. I tried reinstalling it to no avail. I'm an English student, so i really need access to Word. Can anyone help? The Apple store is a major detour for me and would like to fix this issue myself.

Most likely you have Office 2004 which are PPC-only applications and will not work in Lion. Upgrade to Office 2011. Other alternatives are:
Apple's iWork suite (Pages, Numbers, and Keynote.)
Open Office (Office 2007-like suite compatible with OS X.)
NeoOffice (similar to Open Office.)
LibreOffice (a new direction for the Open Office suite.)

I have an external Time Machine drive that I want to reformat. I can't remember the password. How can I do this. Disk Utility won't let me. Thanks.

I have an iMac that had drive problems last winter. Took the iMac to the Apple Store and they reinstalled everything and now it works again. Only thing is that my external Time Machine drive is screwed up now. Its 1.5 TB.
I had the Time Machine drive partioned into two parts. One partion was for an emergency bootup using carbon copy cloner. That partion I can open and mounts on my desktop. The other partion was Time Machine. It once upon a time opened and mounted without a password.
It requests a password to unlock even though I never had it password protected before the iMac drive problems. And so now it won't mount the drive.
I can go to Disk Utilities and I can see Time Machine with both partions. The Carbon Copy partion is mounted. The Time Machine partion is not mounted. For this reason I can't select it and erase it.
What the heck am I supposed ot do now to erase it and start over. Any help would be appreciated. I really don't want to go and buy another drive.
Kevin

Triple-click anywhere in the line below to select it:
{ diskutil list; echo; diskutil cs list; } | open -f -a TextEdit
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V).
A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. The title of the window doesn't matter, and you don't need to post that.
If any personal information appears in the output, anonymize before posting, but don’t remove the context.

Migration assistant - doesn't see Time Machine drive

I'm using a netatalk based Time machine drive which works perfectly from my old 2006 MBP.
I'm trying to use Migration Assistant to restore the data to my new 2010 MBP. Time machine on both macs sees the netatalk drive, however, Migration Assistant does not - there is just an empty window with a spinning progress wheel.
Any ideas?

This seemed to be a problem with mounting the Time Machine sparsebundle from the old MBP.
I solved it by:
1. Launching Disk Utility,
2. Drag sparsebundle into the drive list on the left (takes ages, ignore spinning wheel)
3. select the sparsebundle
4. Click Repair
took a few hours, but now I can mount the image and once mounted manually, Migration Assistant sees it.
Although it makes sense, it's not obvious that you need to mount the disk image manually for Migration Assistant to see it when Time machine sees it as a destination without doing that step.

Time Machine Backup of snow leopard

Can i restore a Snow Leopard Time Machine backup using the Leopard Installation disks?
I screwed up some mac's at the office and need to repair it before anyone finds out :P
thanks

Again, since Snow Leopard has not been released, we cannot discuss any aspect of it except the feature information Apple has officially announced. If you are a registered Apple developer or authorized participant in an Apple seeding program, you have special forums available to you where you can ask questions about Snow Leopard.

Mountain Lion Mail - Can't see time machine recovered mailboxes

If anyone can please help!
Somehow upgrading to mountain lion I lost mail. I recovered these from time-machine. For a while I could see them in the left-most pane under a heading called Time Machine. But in archiving some old content this folder-header (like iCloud or on your mac) disappeared. I know that the mail is still there as I can search for it. Weirder still, if I create a new mail-box I can see a Time Machine folder under 'on your mac'. I just can't get to the mail! The screen-shot below shows two folders (one containing all my recovered mail sub-folders) in the 'create a new mailbox drop-down' but only one in the left-pane under 'on my mac'.
I really need to be able to use this mail; sort of why I backed it up....

Same problem here. After hitting the Restore-button in Time Machine to restore an e-mail, Time Machine is supposed to make a folder in Mail with the recoverd mail(s), but doesn't. Accessing by doing a search doesn't always lead to the restored file.
Mountain Lion OS X 10.8.2

Mac with new drive/system can't see Time Machine backup.

The drive on my wife's MacBook Air went bad and we got it replaced at the Apple Store. She started the Air, went to restore her files from her Time Machine/Time Capsule backup and her backup was not listed.
Then we tried again and the migration assistant says 'connection failed.'
I checked the volume from my Mac and the 'sparsebundle' is on the Time Capsule.
Any ideas?

This is a guess, but I'd try mounting that "sparsebundle" before you launch Migration Assistant.
If that doesn't help, check item #19 of Time Machine FAQ.

Can't see time machine files

I had my 2007 MacBook Pro backed up to an external hard drive with time machine, but didn't update it for almost a year and now it seems to have forgotten the device. I can't "go back in time" or see any files the user folder in the external hard drive. How can I see my stuff again?

Sallymuffin wrote:
Selecting the disk to browse from right clicking the icon didn't work either.
What do you mean? Does the disk not appear in the window? Or nothing happens when you select it and click Use Selected Disk? Or ??
If not, the backups may be corrupted (or, after a year, the drive may not be functioning properly -- most drive makers say they shouldn't go that long without being used for at least a bit every 90 days or so, as the bearings may lose their lubricant).
See if you can repair the backups, per #A5 in Time Machine - Troubleshooting.

Lion can't see Time Machine drive that Snow Leopard does

Similar Messages

Maybe you are looking for