Lion Causing App Issues - Gestures

Hi,
After installing Lion I found that 90% of my apps would crash within the 1st 20 seconds, i went to the Apple Store & spoke to a tech guy there & he said for me to re-install Lion again, which I've done. All was fine until I reset, now the problem is back again. I'm at my wits end with it & have basically paid £20 for my machine to become unusable.
From what i can see in the crash report it's something to do with the gestures?! Can anyone help, would be most appreciated.

I just updated tonight and have exact same problem. . No more gestures with 2 fingers etc.

Similar Messages

Mountain Lion causing apps not to work, how can I downgrade to Lion without Time Machine Back-up?

Since installing Mountain Lion, I have found applications that don't work. I want to go back to Mountain Lion, unfortunately I had trouble with my Time Machine back up hard drive a couple days after installing Mountain Lion and I don't have any back up to work from. Tried to go to App Store and redownload Lion from there under purchases, but I got message that said "You can’t upgrade this version of Mac OS X because a newer version is installed."
I have another mac that I can download the Lion install package to and then drag it over to this computer, so the question is, Will I be able to re-install Lion over the upgraded Mountain Lion without any problems?

Babowa - By On Screen, I mean it still shows up in the disk utility and reads the following:
MATSHITA DVD-R   UJ-898:
Firmware Revision:    HE13
Interconnect:    ATAPI
Burn Support:    Yes (Apple Shipping Drive)
Cache:    1024 KB
Reads DVD:    Yes
CD-Write:    -R, -RW
DVD-Write:    -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:    CD-TAO, CD-SAO, DVD-DAO
Media:    To show the available burn speeds, insert a disc and choose File > Refresh Information
There are several links here on the support forums with manyyy others having the same problem: https://discussions.apple.com/thread/4150905?start=30&tstart=0

Mountain Lion Server App - Issue with Time Machine Volume Selection

Besides my gripes that 10.7 Server or the 10.8 Server app are radically dumbed down versions of what 10.6 Server was capable of, the upgrade to 10.8 from 10.7 unexpectably broke my home time machine backup.
Am quite familiar with the prior server versions as we are still using 10.6 Server on a dozen or so Xserve's, plugging along nicely
This is for our house setup using a Mac Mini with an attached 8TB RAID managing media serving and time machine backups. For simplicity, the array is partitioned as a single volume and simply configuring a file sharing sharepoint as a Time Machine Volume. Simple and easy!
When upgrading to 10.8 and then installing the server app, the upgrade conveniently didn't migrate any file sharing settings, forcing me to set them up again. Easy enough, just took a couple of minutes, except that the share point I used for time machine backups has no more setting to turn it into a Time Machine volume.
As such, under the Time Machine tab, which shows only logical volumes, I simply can't back up to our existing backups.
I suppose I can re-partition the array to create a logical volume for TM backups, but I can't believe that there is no provision to change a sharepoint into a TM volume anymore.
Am trying to stay away from CLI settings as well as that defeats the purpose of the app.
Any thoughts or suggestions?
Wolfman

I have asked the hosts to move your post to the OS X Server forum.

HT4009 I keep getting a message to contact itunes support when I try to make an in app purchase. What could be causing this issue? My credit card is up to date and in app purchases aren't restricted.

I keep getting a message to contact itunes support when I try to make an in app purchase. What could be causing this issue? My credit card is up to date and in app purchases aren't restricted.

Have you tried contacting iTunes Support and asking them ? We are fellow users here on these forums, it could be due to a number of reasons, we won't know which one.
http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

IMAP issues in Lion Mail.app?

Hello...I've been dealing with a snarky email issue with Lion Mail.app for several months. The issue is that Lion Mail does not have the same email counts as the corresponding web mail server for that account shows, either grand total, or folder by folder.
Snow Leopard Mail, and Tiger Mail DO agree with the web server, and Thunderbird 8.0 installed in Lion does agree exactly with web mail.
Based on these observations, a lot of testing, and several deleting of email accounts and re-setting them up again, my feeling is that there is something wrong with Lion Mail.app's ability to handle IMAP
I certainly do like the Mail.app and it's my first choice, but I need to see an accurate view of my mail. Lion's Mail simply isn't giving it to me.
Any thoughts from those who've had an experience like this with Lion Mail.app? If you've had this problem and fixed it, how DID you fix it?
Thank you,
ray

After you click [+] to add an account, hold the option key and click [Continue]
"When all else fails, hold the option key!"

SharePoint 2013 Office Web App issue

We met an issue on Office Web App with SharePoint 2013.
Error message on the page:
Sorry, there was a problem and we can't open this document. If this happens again, try opening the Microsoft Word.
There is no related log in Windows Event viewer.
In SharePoint ULS log, related message as below:
08/12/2014 06:42:45.49 w3wp.exe (0x2C90) 0x2FE0 SharePoint Foundation Claims Authentication ahds8 Unexpected SPJsonWebSecurityBaseTokenHandler: Issuer name in token '00000003-0000-0ff1-ce00-000000000000@testrealm' doesn't match any of the registered issuer names for trusted sts 'collaboration metadata'. 7ba9aedb-4658-4a32-aaaa-20bcd0d52be6
08/12/2014 06:42:45.49 w3wp.exe (0x2C90) 0x2FE0 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Application Authentication Pipeline). Execution Time=7,5254676222816 7ba9aedb-4658-4a32-aaaa-20bcd0d52be6
08/12/2014 06:42:45.49 w3wp.exe (0x2C90) 0x2FE0 SharePoint Foundation Application Authentication ajezu Unexpected SPApplicationAuthenticationModule: Failed to authenticate request, unknown error. Exception details: System.IdentityModel.Tokens.SecurityTokenException: Issuer name is not registered at Microsoft.SharePoint.IdentityModel.SPJsonWebSecurityBaseTokenHandler.ValidateTokenIssuer(X509SecurityToken signingKey, String tokenIssuer) at Microsoft.SharePoint.IdentityModel.SPJsonWebSecurityBaseTokenHandler.ValidateToken(SecurityToken token) at Microsoft.SharePoint.IdentityModel.SPJsonWebSecurityTokenHandler.ValidateToken(SecurityToken token) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.TryExtractAndValidateToken(HttpContext httpContext, SPIncomingTokenContext& tokenContext) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.ConstructIC... 7ba9aedb-4658-4a32-aaaa-20bcd0d52be6
08/12/2014 06:42:45.49* w3wp.exe (0x2C90) 0x2FE0 SharePoint Foundation Application Authentication ajezu Unexpected ...laimsPrincipalAndSetThreadIdentity(HttpApplication httpApplication, HttpContext httpContext, SPFederationAuthenticationModule fam) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.AuthenticateRequest(Object sender, EventArgs e) 7ba9aedb-4658-4a32-aaaa-20bcd0d52be6
08/12/2014 06:42:45.49 w3wp.exe (0x2C90) 0x2FE0 SharePoint Foundation General 8nca Medium Application error when access /sites/111/_vti_bin/wopi.ashx, Error=Issuer name is not registered at Microsoft.SharePoint.IdentityModel.SPJsonWebSecurityBaseTokenHandler.ValidateTokenIssuer(X509SecurityToken signingKey, String tokenIssuer) at Microsoft.SharePoint.IdentityModel.SPJsonWebSecurityBaseTokenHandler.ValidateToken(SecurityToken token) at Microsoft.SharePoint.IdentityModel.SPJsonWebSecurityTokenHandler.ValidateToken(SecurityToken token) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.TryExtractAndValidateToken(HttpContext httpContext, SPIncomingTokenContext& tokenContext) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.ConstructIClaimsPrincipalAndSetThreadIdentity(HttpApplication httpApplication, HttpContext httpCont... 7ba9aedb-4658-4a32-aaaa-20bcd0d52be6
The farm is having 2 WFE. There is NLB setting up for them.
AAM has been set to Default.
OWA binding set to -AllowHttp, zone set to internal-http. AllowOAuthOverHttp set to true.
The strange thing is when days ago we finish the installation, we try the link http://{server_name}/somefolder/document.docx to do the test, it works fine.
But today we try the link http://{NLB_link}/somefolder/documnet.docx, above error occur.
We are not sure whether AAM setting cause this issue or some other reaone. But even we remove the AAM to use the Server Name in link, still above issue.
Any idea/comments would be appriciated.

What is the default AAM? Is it the server_name, or the NLB_Link? Might want to try having the NLB_Link as the primary (default) AAM if you haven't already?
Not sure if you have seen the Troubleshooting steps here:
http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx#tshoot
it discusses use of the PowerShell command:
New-OfficeWebAppHost (http://technet.microsoft.com/en-us/library/jj219459(v=office.15).aspx) which might be required for your NLB_Link.
Gavin.

IPhone iOS 8: Tapping on photo icon in messages app causes app to crash

Issue (?ios 8 bug?): Tapping on photo icon in messages app causes app to crash. Present in ios 8.0, and also still in ios 8.0.2. iPhone 6+ 64GB.
I just wondered if anyone else has been having this problem.
Initially it worked great. Tapping the photo button next to the text box in message should bring up a menu with your latest photos and other sharing options. However, after the first couple of days, tapping the button brought up the menu, the phone freezes, and then after a few seconds the photo app crashes.
Deleting most of my photos restored the function, but after another couple of days (and some more photos) it started happening again so I think perhaps it is related to the number of photos. After about 5-10 photos it loads the menu very slowly and its quite buggy. After 20+ photos it wont load the menu at all without freezing and the app crashing.
My iphone 6+ was set up as a new phone (not restored from back-up).
I hope this is some kind of bug that will be fixed in ios 8.0.3, but wondered if anyone else has the same problem or has any solutions?
My workaround at the moment is just to go the photos app and either copy and paste the photo into a message, or share the photo via the photos app.

I have this same issue with my 128 gb 6 plus. I've tried restoring as new on a few occasions, but to no avail. I did notice while my pc was synchronizing my apps, that the feature worked fine a few times until the synchronization was complete. I seriously hope that the numbers of photos limits one's use of the feature, because i purchased the 128 gb 6 plus so that i could keep photos at my ready.
Has anyone heard of a solution yet?

Mac Mini - Server running Lion - Network related issues

I have a mac mini running Lion. I am having a few issues that did not exist prior to an upgrade. But for the life of me, I can't figure it out.
The problems I'm having are as follows:
1. screen sharing times out. It works, then stops after a while. If I go in and uncheck, then recheck remote management, it'll work again, but only for a while.
2. neither the air port or the hardwired ethernet will obtain an ip via DHCP. Works fine once I put in a static, but will never obtain a dynamic address.
3. Homesharing on Itunes will turn off after a while, same as the screen sharing does..
4. Time Capsule is no longer found by the Mac Mini. My macbook pro see it no problem. It also keeps the itunes homeshare and can get DHCP addresses fine, so I know it's not a router issue that is causing the issues on the mac mini.
Thanks
James

well to be honest I wanted a server to run more aspects of what I do privately (rather tahn at work) rather than use hosted accounts from disparate hosted providers on line. In partcular wanted a mail server to handle multiple mail domains, wiki server, web sever as per mail server and I was interested in what they would provide for iphone ipad etc as I have a few that I wanted to link to a server rather than individual macs and pcs
I also thought that Apple might bring their abilities to creating a great UI for essentially linux operating systems to a server os.
from initial views though it might have been easier (cheaper) to go to ubuntu and just their server version of linux. Anyway I will persist - I will read through the stuff you guys have linked me to - colinsolutions appears to have aimed me at some useful stuff. Looks like a bigger "project" than i imagined - but I havent looked at UNIX since 1986 so if I have to get into the command line it wont kill me I am sure.
thanks for the input - if anyone else can suggets good resources that would be appreciated.
ps simon - i found that the name for the server with the .local extension is visibile from the mac via finder and allows me to connect to the shared folder. so my server is sdhome - the shared resource is sdhome.local ... not sure if this helps but...

XFi-2- Latest firmware (1.20.08) has caused some issues on 32GB model...

HXFi-2- Latest firmware (.20.08) has caused some issues on 32GB model... When I started my PC last night, it notified me that new firmware was avaliable so it downloaded it and installed it on my Xfi-2 32GB
According to the release notes, it was to add support for the 64 GB model as well as some general improvements.
I can't determine what the latest improvements were (anyone have any clues ) and the UI seems the same.....the only things that have changed are that my applications no longer work (when I go into the applications shortcut, it says there is no valid content: I haven't touched these folders etc and they are still populated with the three standard apps as far as I can tell)
The other thing (which may not be related to the firmware upgrade) is that my photos shortcut now pulls up some of my music folders that contain album art. Is this a feature or a bug (I don't want it to happen, I just want it to show photos within the 'photos' folder on the device).... I think it may have been caused by me simply dragging and dropping music folders onto the device using windows explorer rather than going through Centrale (slow!)
Cheers

Hi Timmo.
What release notes are you reading? I have seen no reference to improvements other than adding support for the new 64 GB model on this firmware version. From the description of the problems you have, it seems that your player has some sort of file system corruption on the internal flash. I would suggest reinstalling the firmware on your device after formatting it (formatting the device only should be enough, I think).
The size of the new firmware release, double than the size on the previous one, means that it probably has new features and applications that will be enabled on the future; however I doubt it means it has new features right now and hope it does not means we have two firmwares (on for the 64 GB model and other for the previous ones) as the SRM/AlphaBIOS pair on the Digital Alpha systems (an ugly hack on these superb computers, in my humble opinion) -- by the way, the new firmware does not require more space on the internal flash (I have 5077 MB available on mine with all firmware releases).
The behavior you describe about album art being shown on the photos shortcut happens with older firmware releases too; I prefer album art embedded on the audio files instead of being available as another file. I agree with you, only pictures under the photos directory should be shown as images.
Cheers.

In which community is it best to discuss mail.app issues?

In which community is it best to discuss mail.app issues?

You should ask in the forum for the version of OSX you are using:
OS X Yosemite
OS X Mavericks
OS X Mountain Lion
Mac OS X v10.7 Lion
Mac OS X v10.6 Snow Leopard

IPad App issue ..!! adt.bat -target ipa-app-store app hangsss..!!

Hi Team,
I have created an iPad App.
adt.bat -package -target ipa-app-store : makes an .ipa which installs on my iPad, but fails to run it brings up splash screen and halts
adt.bat -package -target ipa-test : makes an .ipa which installs on my iPad, but fails to run it brings up splash screen and halts
adt.bat -package -target ipa-test-interpreter : makes an .ipa which installs on my iPad and successfully runs
After issue, i create a simple app using just one label , still the same issue
I am using correct distribution provision and certificates .
help appreciated..!!

I did eventually figure it out. At the time I didn't know how to embed an XML file, so I was taking the file and converting it to a reallly long string. It was in the format of:
xmlString += "<xmlTag>stuff</xmlTag>";
xmlString += "<otherTag>stuff</otherTag>";
There were three files, the shortest of which was over 1000 lines long. For some reason the compiler just choked on that. If I had even one of them in there it wouldn't compile for the app store. The moment I removed them, everything could compile just fine. That was when I figured out how to just embed the XML files and everything has worked since. Interestingly, my compile times for test and debug mode dropped by half once I did that; so it was clearly causing some issues for the compiler in general.
If you don't have a file like the one I just described, I would recommend commenting out almost everything in your main file and compiling it. If you have an empty project, everything should compile correctly. Start adding things back in one at a time until you get the problem. That was how I ended up nailing down what was happening for us.

ADF mobile Client App: Issue about using db sequence for populating row_id

Hi,
I'm working on an ADF mobile client app POC project. In the mobile app, new record can be created, the column type for row_id is VARCHAR2(15), I used the db sequence created in MC db, converted the seq number to a string, then set row_id via initDefaults method.
The new records are created and row_ids are set with the proper sequence numbers when first time launching the client app in blackberry simulator. But if I exit the app and re-launch the app again, I got net.rim.device.api.database.DataTypeExpection when trying to create a new record.
Could anyone please help me and let me know what could cause this issue? What should be the proper way to populate the row_id? Appreciate your response in advance!
Jdev/ADFMobile extension version:
11.1.1.4.0 build 5860
mobile server version:
10.3.0.3
blackberry version:
BlackBerry JDE 5.0.0
BlackBerry Smartphone Simulators 6.0.0.141 (9800)
Code:
public class SOrgExtEOImpl extends EntityImpl {
protected void initDefaults() {
super.initDefaults();
SequenceImpl seq = new SequenceImpl("S_SIEBELMOBILE_S_ORG_EXT", getDBTransaction());
populateAttributeAsChanged(ROWID1, seq.getSequenceNumber().toString());
Log:
First time launching the MC app:
[FINE - adfnmc.bindings - BC4JIteratorBinding - createRow]
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 0 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 1 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 2 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 3 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 4 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 5 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 6 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 7 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 8 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 9 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 10 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 11 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 12 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 1 to 2010-12-20 14:58:13.0
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 3 to 2010-12-20 14:58:13.0
[FINE - adfnmc.model - SequenceImpl - create] Database SQLite doesn't support sequences natively; creating TableSequenceImpl for
S_SIEBELMOBILE_S_ORG_EXT
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 0 to 73501
[FINE - adfnmc.model - EntityImpl - getAttribute] Retrieved from siebel.mobile.SOrgExtEO.CreatedBy at index 2
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 2 to 1-11ZQ
[FINE - adfnmc.model - EntityImpl - getAttribute] Retrieved from siebel.mobile.SOrgExtEO.LastUpdBy at index 4
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 4 to 1-53Y
[FINE - adfnmc.model - EntityImpl - getAttribute] Retrieved from siebel.mobile.SOrgExtEO.BuId at index 5
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 5 to 1-1DG
[INFO - adfnmc.model - MetaObjectManager - findOrLoadMetaObject] MetaObject siebel.mobile.AccountAddressFKAssoc not found in cache, so
loading it from XML
[INFO - adfnmc.model - MetaObjectManager - findOrLoadMetaObject] MetaObject siebel.mobile.ActivityAccountFKAssoc not found in cache, so
loading it from XML
[FINE - adfnmc.bindings - BC4JIteratorBinding - notifyRowInserted]
[FINE - adfnmc.bindings - IteratorExecutableBindingImpl - rowInserted] IterBinding - AccountPageDef:AccountAddressView1Iterator
[FINE - adfnmc.bindings - IteratorExecutableBindingImpl - notifyRowInserted] IterBinding - AccountPageDef:AccountAddressView1Iterator
[FINE - adfnmc.bindings - RangeBindingImpl - rowInserted] AccountAddressView1
[FINE - adfnmc.bindings - RangeBindingImpl - notifyNewElement] AccountAddressView1, index:0
[FINE - adfnmc.ui - BBTable - newElement] relativeIndex = 0
[FINE - adfnmc.bindings - RangeBindingImpl - setVariableIndex] Begin, AccountAddressView1, listener: oracle.adfnmc.component.ui.BBTable$1
[FINE - adfnmc.bindings - SimpleContext$Variables - setVariable] Setting variable "row" to expression #
{AccountPageDef_AccountAddressView1_rowAlias}
[FINE - adfnmc.ui - BBOutputText - endInit]
Re-launching the MC app:
INFO - adfnmc.bindings - BC4JOperationBinding - execute] Preparing to execute OperationBinding id:'CreateInsert'
[FINE - adfnmc.bindings - BC4JIteratorBinding - createRow]
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 0 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 1 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 2 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 3 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 4 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 5 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 6 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 7 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 8 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 9 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 10 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 11 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 12 to
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 1 to 2010-12-20 15:08:35.0
[FINEST - adfnmc.model - EntityImpl - populateAttribute] Setting value at index 3 to 2010-12-20 15:08:35.0
[FINE - adfnmc.model - SequenceImpl - create] Database SQLite doesn't support sequences natively; creating TableSequenceImpl for
S_SIEBELMOBILE_S_ORG_EXT
[INFO - adfnmc.ui - ErrorHandlerImpl - reportException] BindingContainer: AccountPageDef, exception: oracle.adfnmc.AMCJboException
[WARNING - adfnmc.ui - ErrorHandlerImpl - reportException] [oracle.jbo.server.SequenceImpl$TableSequenceImpl.retrieveSequenceParamsFromDB]
oracle.adfnmc.AMCJboException: ADF-MNC-60109: Error retrieving sequence parameters for sequence S_SIEBELMOBILE_S_ORG_EXT
[WARNING - adfnmc.ui - ErrorHandlerImpl - reportException] oracle.adfnmc.java.sql.SQLException:
net.rim.device.api.database.DataTypeException:Datatype mismatch
[WARNING - adfnmc.ui - ErrorHandlerImpl - reportException] Unable to retrieve String at index 2
[WARNING - adfnmc.ui - ErrorHandlerImpl - reportException]
[FINE - adfnmc.ui - MessageBox - show] message=oracle.adfnmc.AMCJboException: ADF-MNC-60109: Error retrieving sequence parameters for
sequence S_SIEBELMOBILE_S_ORG_EXT
[FINE - adfnmc.ui - MessageBox - show] oracle.adfnmc.java.sql.SQLException: net.rim.device.api.database.DataTypeException:Datatype mismatch
[FINE - adfnmc.ui - MessageBox - show] Unable to retrieve String at index 2

>
>
using 10gR2 on Sun-Solaris. Getting consistently "db file parallel read" over 35 ms as an average wait for the past few months. No performance issues as such.
Using RAID 1+0. DB Size is 2 TB. Transactions are OLTP/Batch
Is this metric high or normal. How to justify that..
Looking at your results it's not really possible to say.
db file parallel read is a request for a number of randomly distirbuted blocks, and the time for a read is the time for the last block of the set to be returned.
Without knowing how many blocks are being requested at a time you can't really determine what constitutes a reasonable time. Given that you say OLTP + Batch, and have a large volume of scattered reads, it's quite possible that you have some queries on the Batch side doing very large index range scans - which would allow for some very large db file parallel reads.
I take it from the use of statspack that you're not licensed for the diagnostic and performance packs; it would be easy to query v$active_session_history to get some idea of the number of blocks per request as this is given by the P2 parameter. As it is. you may be able to get a rough idea by messing about with the various "physical read" numbers in the Instance Activity section of statspack.
Regards
Jonathan Lewis

ICS upgrade causing RAZR issues

Since my 1AM update, my screen now flickers apps on and off. My wallpaper will flash, the apps will disappear and then reappear, and it's almost like they have a refresh rate to them.
At times I can't open my media files or my camera.
Anyone else having issues like this? Is there a fix or is this a known issue?

ever since my phone update a few days ago it runs super hot and the battery life is down to lasting only 2 hours. i looked on some other forums and i uninstalled the app killer and it help some with the heat but got a big boost on battery life, so start with that. however i am unable to view any of my pictures/videos i took prior to update even though it shows them in my files and it will not save new pictures either. i off loaded my sd to my computer and tried to fomat the card but its still not working either. havent tried to send a text with a pic yet cause it wont alow me to see them. also remove/disable any battery extenders or any type of of app like that. ics does all that already and i guess the two programs cause apps to turn on then off then on............

Calendar App Multitouch Gestures

Hey guys,
I noticed in the calendar app, multiouch gestures aren't working like they previously used too. Is it just me, or is the same the board? If so, that's pretty **** annoying, removing the swipe to change the month view
Any one else got the same issue? Or just me?

I've noticed this too.
Trawled the net and found no solution...

Error message is not telling which field causing the issue!

Hello
I am developing the Adobe Interactive Form and launching this form from WebDynPro ABAP application, fine.
This form has tonns of dropdown fields, mandatory fields, greyed out fields. Fine.
I am filling the list the drop-down fields from webdynpro ABAP, but, i am filling list for only 80% of the drop-down fields, rest 20 % is not filling at all (bcz, business want to have those 20% dropd-owns on the form by thinking going further they require, this moment they dont need so they dont want to fill the lists)
Now the form is launching on the browser, fine. But when user submits it i am getting the below erro:
The Entered Value Is Not on the List of Valid Values. (I am guessing this error is talking about the DROPDOWN fields only)
I hv tonns of drop-down fields, so, its very difficult for me to go and trace each and every drop-down fielld!! But, i checked all the populated/entered values in the drop-down fields, they are all fine. Sone dropd-down fields are GREYED OUT, they are defaulted from webdynpro ABAP
Pls. let me know How can know which field/drop-down is causing this issue? Wht are the possible causes for this error? Error is not telling which fields is making issue?
How can i trace and how can i fix it, pls. let me know
Thank you

Thank you for your tips.
But, as of my knowledge every thing (case sensitive, list box entries) are fine, not sure, why am getting this error! I will double chk again.
But, thing is.... actually, i have 4 pages, depending on the logged in user, i will HIDE the pages (say, for me the 3 rd page will be hidden), i am hiding the pages by using JavaScript in the form.
So, this error is not coming if i execute/launch all the 4 pages, but, its coming if i hide any page for any user!!
By chance, do we debug to figure out which FIELD is CAUSING issue/this error?
From where this message is coming, i mean, from the SAP's JAVA stack? Wht is the message ID and #?
or is it Adobe's/Form's error?
Thank you

Lion Causing App Issues - Gestures

Similar Messages

Maybe you are looking for