Lion compatible with Cisco VPN?

Is Lion compatible with Cisco VPN Client 4.9.01?

Yes. Boot up in 32 bit mode and the Cisco VPN client 4.9 will work in Lion.
Restart the mac and hold the 3 and 2 buttons and you'll be in 32 bit mode. The vpn client should work.

Similar Messages

  • Is Mt. Lion compatible with Final Cut Pro 7?

    I am currently running Lion (10.7.5) on a 27" iMac 3.4 Ghz.
    Is Mt. Lion compatible with Final Cut Pro 7 and FCS 3? Will these programs still run or will they be not supported by the new OS as has been the case with past apps when a new OS is introduced?
    Thanks,
    Phil

    I have a 2gig HD for backing up my system HD . The backup HD is partitioned into 20 - 1 gig partitions. I use the Carbon Copy Cloner app to make a clone copy of the system HD. Never had a problem. If I need to I can boot from one of the clone partition or copy file from.
    (Just make sure your FPC media and video files are on a external HD (firewire for example) other than a USB 2 HD. FCP does't work properly with USB 2 drives.)

  • Is lion compatible with CS4 and C1Pro

    Just wondering if  Lion compatible with Photoshop CS4 and Capture 1 pro 6.2.x?

    all Adobe products have more or less issues in Lion. The only one 99% compatible is CS5.x, the latest.
    Everything before CS3 will not even run, because it is PowerPC and Lion does not run PPC apps anymore. CS3 and above are Intel compatible. CS5 introduced first 64bit support on Intels ( Lion is fully 64bit )
    Adobe has a Website with issues on Lion : http://kb2.adobe.com/cps/905/cpsid_90508.html
    Your other product I do not know, sorry.

  • Is mountain lion compatible with snow leopard?

    is mountain lion compatible with snow leopard? can you use the same version of iTunes

    VMware and Toaster can be upgraded to versions that will run on Mountain Lion.
    I was not able to find anything on PalmPilot for Mountain Lion. Of course seeing as how it is at least 15 years old that doesn't surprise me.
    As I see you want to run two operating systems which means rebooting to use them just for PalmPilot. IMHO that is a lot of effort on your part for a very small gain.
    Allan

  • Is Lion Compatible with snow leopard software games, other software?

    Is Lion Compatible with snow leopard software games, other software?

    There is a compatibility list here:
    http://roaringapps.com/apps:table

  • Does Supervisor Engine 6L-E compatible with Cisco Ws-C4506 Non-E switch?

    Does Supervisor Engine 6L-E compatible with Cisco Ws-C4506 Non-E switch?

    Yes, it is compatible with non-e chassis.
    see below:
    The Cisco Catalyst 4500 Supervisor Engine 6L-E is also compatible with classic Cisco Catalyst 4500 line cards, chassis (3-, 6-, and 7-slot), and power supplies, providing full investment protection.
    link to data sheet:
    http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-series-switches/data_sheet_c78-530856.html
    HTH

  • Why isn't moutain lion compatible with the macbook?  I have lion installed.

    Why isn't moutain lion compatible with the macbook?  I have lion installed.

    This is Apple's not so subtle hint that they will not begin to not supporting your machine anymore...

  • Is OSX lion compatible with microsoft office for mac 2008

    Can anybody out there please give me a definitive answer to this question: Is OSX Lion compatible with Microsoft Office for Mac 2008? The technical support people of both Apple and Microsoft could not provide me wth a useful answer to a question that must interest hundreds of thousands of people, if not millions. I don't want to download the new OS and then encounter nasty problems.

    Yes. The only problem you could face, is if you want to reinstall MS Office 2008 on Lion - this is not possible, because the installer runs on Rosetta, which is no longer supported in Lion. But if you already have Office installed, there should be absolutely no problems.

  • Boot camp with Cisco VPN client and smart card

    Looking at a Macbook or Macbook Air and the only reason I need to run windows is to be able to access my work network through the Cisco VPN client and my Smartcard then use remote desktop. From my understanding if I run Bootcamp it should work am I correct? Im going to an Apple store tomorrow hopefully they can help too.
    Thanks

    mrbacklash wrote:
    Ok with that being said will the MBA 11.6 1.4ghz have the guts to make it run mostly internet based programs over the VPN connection?
    I think if you are running apps over the Internet the bottleneck will be the Internet and your VPN bandwidth. Your computer can certainly execute faster than Internet communications.
    Besides, Internet or remote applications run on the remote server. All your local computer does is local processing of the data if necessary.
    Message was edited by: BobTheFisherman

  • Problem with Cisco VPN client and HP elitebook 2530p windows 7 64-bit

    Hi there
    I have a HP Elitebook 2530p which i upgraded to windows 7 64-bit. I installed the Cisco VPN client application (ver. 5.0.07.0290 and also 64-bit) and the HP connection manager to connect to the internet through a modem Qualcomm gobi 1000 (that is inside the laptop). When I connect to the VPN, it connects (I write the username and password) but there is no traffic inside de virtual adapter for my servers. When I connect to the internet through wire or wireless internet, I connect de VPN client and there is no problem to establish communication to my servers.
    I tried everything, also change the driver and an earlier version of the HP connection manager application. I also talked to HP and they told me that there was a report with this kind of problem and it was delivered to Cisco. I don’t know where is the problem.
    Could anyone help me?
    Thanks to all.

    You can try to update Deterministic Network Enhancer to the below listed release which supports
    WWAN Drivers.
    http://www.citrix.com/lang/English/lp/lp_1680845.asp.
    DNE now supports WWAN devices in Win7.  Before downloading the latest version of DNEUpdate from the links below,  be sure you have the latest
    drivers for your network adapters by downloading them from the vendors’ websites.
    For 64-bit: ftp://files.citrix.com/dneupdate64.msi
    Hope that helps.

  • Connect sequence with Cisco VPN & BT FON

    I have an issue with the connection sequence using Cisco VPN & BT Openzone/FON
    I cannot connect the VPN until I have logged in to BT FON/Openzone
    This would be ok, but I use a tabbed browser & it is trying to connect all tabs at once over an unsecured link. Also, when (not if) the connection drops I am in the same position.
    It should be possible to connect the VPN first, then the browser
    Thanks in advance,
             Alan 
    Solved!
    Go to Solution.

    The VPN client connection cannot be established without a path to BT Openzone, which hosts the VPN server.
    That`s just the way VPNs work, you have a server and a client.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Mac Pro kernel Panic with Cisco VPN Client

    After Having to rebuild my new Mac Pro 3 times I finally found that it was the Cisco VPN Client that was released for Intel in Feb. of this year that does not play nice with the new machines. Don't install or if it's too late boot into Safe Boot mode by holding your shift key during startup and then follow the instructions at the link below.
    http://itinfo.mit.edu/answer.php?id=8171

    Just a heads-up;
    the new Cisco VPN Client has now been released and fixes this issue.
    The version 4.9.01.0030 specifically resolves the following bugs:
    CSCsd51113 feature unity nonwindows set mtu vpnclient.ini field
    CSCsd51126 unity mac ppp intel fails with mismatch log message 10.4
    CSCsc56445 unity mac rebranding volume name voids rebranding files
    CSCsf19841 unity mac does not support 64 bit mac pro platform
    Cheers,
    Dan

  • IP Communicator doesn't work with Cisco VPN Client

    Hi,
    Im having problem to connect  IP Communicator (either ver 2 or 7 )whenever using Cisco VPN Client 5.0.06.0160 for windows
    the IPC didn't register to the CUCM
    There's nothing showing on the screen
    but whenever im using  Anyconnect VPN Client, it works perfectly
    The remote side is using ASA5505
    Anyone can help ??
    Thanks

         It's probably an issue with the ASA configuration in your "group-policy attributes".  The "split-tunnel-network-list value" is pointing to an access list without the subnet for the call manager.  While your ssl group-policy for webvpn has a "split-tunnel network-list value" access-list which does contain the subnet for the call manager.
         The other issue could be that your using different ip pools for ipsec and ssl vpn.  The ip pool subnet that you might be giving out for ipsec might not be in your "no nat" acl.
    Jason

  • VPN 720 error with win 8 with Cisco VPN client 5.0.07.0440

    Hello,
    I have Win 2008 configured as RRAS- VPN server, with win 7/8 VPN clients.
    half of these client machines are also running "Cisco VPN client 5.0.07.0440"
    all win 7 machines works fine however most of Win 8 will not connect to windows VPN, if they also have Cisco VPN client 5.0.07.0440 intsalled.
    Any suggestion.
    Thanks

    Workaround to this problem is:
    1)- Unintsall Cisco VPN client from win 8
    2)- reset IP stack

  • Is Boot Camp 4.0 (OSX Lion) compatible with a 2006 iMac?

    Just made a clean install of OSX Lion and am trying to install Windows XP using Boot Camp. When I try to download Windows Support Software I get, "Can't install Windows Support Software because it is not currently available from the Software Update".
    Is Boot Camp 4.0 not compatible with my 2006 (White) iMac? If not, can I install an older version of Boot Camp, is there another workaround or do I have to return to Snow Leopard?

    Lion's Boot Camp Assistant will download Boot Camp 4, which does not support Windows XP.
    Assuming your Mac came with Leopard, you will instead use the Boot Camp drivers from the disk that came with your Mac.  Partition your disk using the Boot Camp Assistant or whatever partitioning utility you want.  Insert the Windows disk and reboot while holding down the Option key, then select the Windows disk.  Install Windows XP as normal.  When Windows install is finished, insert the OSX disk that came with your Mac and install the Boot Camp drivers.

Maybe you are looking for

  • IPod playlist = no podcast content

    iTunes (11.0.3.42) on Windows XP iTouch 64 GB iOS 6.1.3 These are recent updates. playlists on the iPod no longer receive podcast content that is set up for them in iTunes.  What this means is, the podcasts are on the iPod and iTunes, the podcasts do

  • CIF-Stop Sales orders going over to SCM

    We are only doing the Demand Planning in SCM. There is a master data integration model in R/3 and this job runs overnight. We only CIF over material masters via RIMODGEN. Stock and Sales orders are not set for transfer to APO. However when I check SM

  • Using the States Example how can I set Selected to Maryland Without RowNumber

    Let's use the states example for the sake of everyone having the code in front of them. If I am returning a value from the database that I am writting out to the application like this <%out.write("STATE_NAME"); %> how can I set the selected value to

  • Modifying Floor Plan Manager

    Hello, I want to modify certain ESS service (like modifying the Overview page)which are based on FPM, now for that do I need to import PCUI_GP sca under the Software components for Development or it should be under Required Software components in NWD

  • HR ESS Group

    Hello everyone, hoping one of you can answer my question. I need to add an employee to our ESS Group in HR. Everything else is set - she has a UMR, password disabled, assigned to the ESS authorization group in the UMR etc.... 1) How do I add a user t