Lion dvd image

Ok now you tell me how can i reinstall my Mac Mini 2011 with a line with this performance:
Down: 640kbit
Up: 256
It take about 8h to download.
I'd like to download a dvd image of Lion 10.7 from here but a popup appear and say me that i can't install it.
So, where can i find a correct dvd image?
Thank you and sorry for my english.

There is no DVD image. You download the installer from the App Store. DO NOT install. Go to the Applications folder and make a copy of the installer (select, CTRL- or RIGHT-click, select Duplicate.) Move the copy to a safe location. You may now install Lion or quit the installer. If you install Lion then the installer will be deleted automatically at the end of the installation.
You can make a bootable USB flash drive or DVD from the installer by following the instructions here: Burning A Lion Boot Disc.

Similar Messages

  • Lion is going to be available via app store for download. Will it be possible to burn a dvd image from that?, Lion is going to be available via app store for download. Will it be possible to burn a dvd image from that?

    Lion is going to be available via app store for download. Will it be possible to burn a dvd image from that?, Lion is going to be available via app store for download. Will it be possible to burn a dvd image from that?

    Possibly.  See this Web page.
    By the way, you seem to have been misled by the poor field labeling of this forum software into trying to type your entire post into the "subject" field.  Next time you might want to type just a short summary of your post into that field.

  • I made a mistake. i installed windows using boot camp without os x lion dvd. what should i do? help pls

    i made a mistake. i installed windows using boot camp without os x lion dvd. what should i do? help pls
    Re: can i install windows for pc on my mac or do i need the windows for mac? 

    There is no Lion DVD. Start Boot Camp Assistant and select the menu item to download the Windows Support Software.
    Read and follow the Boot Camp Installation Guide. http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf

  • DVD image question

    Hey this might be a question that should be posted within some other category but I wasnt sure if a pertucar ilife application has the capability.
    I have a mini dvd that has 2 sides and i would like to combine it into one single layer dvd. The total for the mini dvd is under 4 gigs.
    I wanted to know what program would allow me to do something like this. I tried toast 9 thinking they have the multiple dvd image functionality but that seems to be if 1 was windows and another was a mac image then it can combine it into 1 that both can read or something like that.
    That isnt what i am looking for. I have a 2 sided mini dvd that i would like to combine into 1 single regular dvd. Could I use iDVD or would I have to use something else.
    Also toast seems to make dvd images with a .toast extension that any other program doesnt recognize (other then taost).
    Help would be greatly appreciated.

    Here's how to do it with Toast. What you'll get is one DVD with two titles, but you can tell Toast to continuously play the titles so there won't be any break between them.
    1. Insert the mini DVD disc and choose DVD with the top button of the Toast Media Browser.
    2. When something appears in the browser window drag it to the Toast's Video window with DVD video selected as the format. You'll see a progress bar as Toast extracts the MPEG video files from the mini DVD.
    3. When that is done turn the mini disc over and repeat steps 1 and 2.
    4. Now that you have the content of the mini disc in the Toast window, edit the descriptions, scroll the thumbnail to a desired image and choose the menu style you want.
    5. Choose Save as Disc Image if you want to preview how it looks in DVD Player before burning to DVD. You mount the disc image by control-clicking on it and choosing Mount It.
    I have changed the .toast extension on video DVD disc images to .iso and they work fine with my LaCie Silverscreen that can automatically mount and play .iso images.

  • Very large DVD image/folder ( dvd9 in size)

    I'm having problems making an bluray folder or image that is readable by anything!, (using encore).
    So In encore i changed the project format to DVD and set the disc size to custom = 20G !
    My mediaplayer (popcorn hour) did play it OK, incl first-play, menus and subtitles, but i wonder if anyone else have experience with generating DVD image or folder which are large than dvd9 ?
    (obviously you can not burn it, but who does that nowadays anyway)
    /per

    ..to answer my own question: the 20G 'DVD' played very well...
    now I wonder if the player wil accept H264 encoding instead of MPEG2
    ..if so, i guess the only difference to bluray would be the lack of popup menus ?

  • HELP...DVD image file compression settings for youtube.

    HELP...I am mounting a DVD Image from a file on the HD. I would like to compress to use on Youtube.
    What are the best settings? I have a account with YT which allows for more than the 15minute standard. I will be uploading 2hrs worth at times
    Can I batch compress several mounted images?
    I'm using Compressor bu if it is easier I have Handbrake and Mpeg SteamClip.
    Thanks
    Bill
    [email protected]

    Compressor has a preset for youTube videos... Pick the one that closely matches your video:
    Compressor YouTube settings has Frame Reorder set to on by default. YouTube doesn't like Frame Reorder, set it to off. Here are YouTube guidelines for Video set to them:
    http://support.google.com/youtube/bin/static.py?hl=en&topic=1728570&guide=172858 5&page=guide.cs
    Click the links to the left for more info about encoding videos.

  • Mounting dvd image

    hi,
    I have this dvd image I'd like to loop mount. Unfortunately all I get is this error:
    [root] $ mount -t iso9660 -o loop DISC1.ISO files/
    mount: wrong fs type, bad option, bad superblock on /dev/loop0,
    or too many mounted file systems
    (could this be the IDE device where you in fact use
    ide-scsi so that sr0 or sda or so is needed?)
    [root] $
    To me it seems the command is correct. how to fix this?
    .murkus

    phrakture wrote:the type is different for DVD I think - not iso9660 but something UDF
    Thanks, but I forgot to tell that udf doesn't work either.. same error with both:
    [root] $ mount -t udf -o loop DISC1.ISO files/
    mount: wrong fs type, bad option, bad superblock on /dev/loop0,
    or too many mounted file systems
    (could this be the IDE device where you in fact use
    ide-scsi so that sr0 or sda or so is needed?)
    [root] $
    .murkus

  • Remote Install of OEL from DVD image?

    I have a linux server that has CentOS 5.3 64 bit installed. I do not have physical access to it. I can't mount a DVD.
    But I do have access to ssh, yum and can install anything on it.
    Can I download the Oracle Enterprise Linux 64 bit DVD image from OUL Network and install from the image without creating a DVD and putting it in the drive?
    Is there a simple solution?
    Thanks
    SG

    Please visit the http://linux.oracle.com site and follow the link to download a new "up2date" RPM package in the "Switching From Red Hat Network" link.
    Install it on your server and:
    # /usr/sbin/up2dateand take a nap.
    If you do not have a ULN subscription, you can do a network-based install using the:
    boot: linux askmethodtechnique; Google for "linux askmethod" for details. There are also detailed steps in the Red Hat installation guide over at http://www.redhat.com if you prefer.

  • Pav. dv3888nr horizontal line on DVD image and other glitchy things

    Whenever I play DVDs I have problems. Lately, its been a horizontal line or split across the DVD image.  I also get all kinds of burps and hiccups, and picture separation from sound that is usually solved by tapping in the mousepad.  (Weird!) This gizmo is still under warranty but I'm out of the country for a few more weeks.

    Yes, Apple is working on it. The information I gathered from AppleCare is that there is a "capture" procedure in US for those who don't like the lines on their machine.
    At this time, as there is not such a procedure in Europ, my decision is to return mine. The only way to return your PB is to call the AppleStore from which you bought it and ask them for a refund (if you are within the 7 or 14 days depending on the Country you bought it from) or an exchange .
    Applecare will only accept a repair, by the local Apple Certified center, but AppleCare is country specific which means that an applecare bought in Europ will not work elsewhere. Personnally, I declined the repair, because we all know that the defect has not been identified yet by Apple US, so that you can imagine what the local repair center could do !!!
    PS : I just identified the EXACT same line issue at my working place on a Sony LCD screen connected to a G5 DP 2Ghz. Strangely enough, the LCD has also colour set up problems. Moreover the same configuration at home (same SONY screen, G5 DP 1,8 Ghz) has no lining problem. This is the definitive proof to me that every lined screen are defective, even if hundred of them have been recently released.
    PB 1.5 Ghz & 1.65 DL, G5 DP 1.8Ghz , G4 400   Mac OS X (10.4.3)   airport express, iPod 3 & video

  • Trying to Import iDVD dvd Image to another Computer.

    I do not have a DVD Burner in my Computer, so I created the DVD Image hoping that I could transfer this image to my other PC which does have a DVD burner....but it is not letting me. Something about "file could not be moved because ""Videos" cannot be modifie" Any help would be appreciated.

    Never Mind I found the Answer...
    http://homepage.mac.com/geerlingguy/macsupport/mac_help/pages/0023-convert_dmg_imgiso.html

  • (Mountain) Lion DVD

    I'd like to purchase an official Lion or Mountain Lion DVD to update my Mac mini  which currently runs on 10.5.8.
    So it's impossible to download as there is no App Store for Os X on my iTunes (or perhaps I'm overlooking something?).
    All hints and tips are welcome!
    Thanks
    Kurt

    You download via the Mac App Store, not iTunes. First you must upgrade to Snow Leopard 10.6.8 per the below instructions. Then you will find the App Store application in your Applications folder and on the Dock.
    Upgrade Paths to Snow Leopard, Lion, and/or Mountain Lion
    You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.
    Upgrading to Lion
    If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
    You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax.  It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
         Lion System Requirements
           1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
               or Xeon processor
           2. 2GB of memory
           3. OS X v10.6.6 or later (v10.6.8 recommended)
           4. 7GB of available space
           5. Some features require an Apple ID; terms apply.
    Upgrading to Mountain Lion
    To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
         OS X Mountain Lion - System Requirements
           Macs that can be upgraded to OS X Mountain Lion
             1. iMac (Mid 2007 or newer)
             2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
             3. MacBook Pro (Mid/Late 2007 or newer)
             4. MacBook Air (Late 2008 or newer)
             5. Mac mini (Early 2009 or newer)
             6. Mac Pro (Early 2008 or newer)
             7. Xserve (Early 2009)
         Are my applications compatible?
             See App Compatibility Table - RoaringApps.
         Am I eligible for the free upgrade?
             See Apple - Free OS X Mountain Lion upgrade Program.
         For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

  • Back up a dvd image made with 1.5 to as data to dvd-r disc .....

    i ran out of space and i started backing upo my images into dvd media as data.
    i noticed that my image on the hd was usually about 4.0 to 4.5gb , when burned into the dvd media the image size would only show about 400mb.
    that was weird to me.
    so in my first need to make a copy od image i trasfered the image back to hd and the used encore to burn the image back.
    the dvd seems the ok even the size of data shows aver 4gb again but only the first chapter plays, is like some corruption has happened.
    any body has a fix for this ?
    i try copying the video is folder to hd i get errors
    try to do a dvd shrink error can not read the disc.
    help.
    p. s. is the dvd image only suppose to work is is storage in the hd only ?
    the user manual does not specify any of this.......

    i ran out of space and i started backing upo my images into dvd media as data.
    i noticed that my image on the hd was usually about 4.0 to 4.5gb , when burned into the dvd media the image size would only show about 400mb.
    that was weird to me.
    so in my first need to make a copy od image i trasfered the image back to hd and the used encore to burn the image back.
    the dvd seems the ok even the size of data shows aver 4gb again but only the first chapter plays, is like some corruption has happened.
    any body has a fix for this ?
    i try copying the video is folder to hd i get errors
    try to do a dvd shrink error can not read the disc.
    help.
    p. s. is the dvd image only suppose to work is is storage in the hd only ?
    the user manual does not specify any of this.......

  • Removing a DVD Image from a drive?

    Hello everyone!
    Recently I wanted to wipe my MacBook Pro, and do a clean install of Snow Leopard. However doing so proved difficult, because my DVD drive recently gave out and stopped ejecting disks (Had to open her up and take out the drive completely). Anyways, in order to do a clean install, I had to create an image of my Install DVD On an external hard drive, and wipe the computer in target disk mode from another mac.
    The clean install worked perfectly, although now my external Hard Drive is stuck with the DVD Image of the snow leopard install disk on it. I would just wipe the drive, however it has about 450 GB worth of data on it (When I put the Install DVD image on the drive I chose not to erase the current data) and I would just get another hard drive to back up my data and reformat the drive, but currently I do not have another drive to transfer the files to.
    I would just delete the Snow Leopard install disk files, but everytime I plug in the hard drive, it pops up like an install disk and its quite annoying. In the mean time the hard drive still works perfectly, its just annoying always having to close the "Install OS X Snow Leopard" window each time I plug in the drive. (Note: If I remove the install disk files from the drive, the Hard drive still pops up like an install disk when its plugged in)
    So my question is this, (I know I'm finally getting to my point haha) is there any way I can remove the "Install Disk" image from my hard drive without having to wipe the entire drive? Or am I just going to have to get another hard drive to back up all my data and reformat it? Thanks for your help guys, looking forward to your replies.
    Regards,
    -LS
    Other System Info:
    ~Computer
    Model: MacBook Pro 3,1
    Make: 15" Discrete Model
    Processor: Intel Core 2 Duo (2.2 GHz)
    RAM: 4 GB
    ~External Hard Drive
    Model: Western-Digital My Book
    Size: 500 GB (Capacity); 33 GB (Free)

    Thanks for your reply Neville.
    I am currently able to read and write the files on the drive, and I am able to delete the Mac OS X install files. However even after I do so, whenever I plug in my external hard drive, it always pops up like a mounted .DMG file, instead of popping up like a hard drive.
    Also by default I use the "List" view in the finder. But whenever I access the drive, it shows the files in "Icon" view since I added the Mac OS X install disk image to the drive =(.

  • [HELP] need TX2 recovery DVD/Image

    [HELP] need TX2 recovery DVD/Image HP won't repair it b/c i dont have the original software....can someone provide me an image or i will pay $ for DVD plz full model is TX2-1024CA

    That is a notebook PC. Maybe this document will help? http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00810334&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
    ... an HP employee expressing his own opinion.
    Please post rather than send me a Message. It's good for the community and I might not be able to get back quickly. - Thank you.

  • Lion DVD - Use by someone else

    I've successfully downloaded/installed Lion, and even created both a install DVD and USB stick.
    A friend has purchased and tried to download Lion.  If I give him a copy of the Lion DVD, can he use that without any problems?

    A similar question was asked elsewhere - MacRumors.  The reponse was that the installer package is the same download for everyone.  it was indicated at the end of the installation, when your computer logs into Apple, that's where your eligibility is verified.  i.e. it's not hard coded into your installation download.
    Thoughts?

Maybe you are looking for

  • Change in Terms of payment for Vendors / Customers

    Dear Friends, If the Terms of Payments are changed in Vendor / Customer master data then what will be the effect on below situation : 1.   How will any open Purchase Orders and any open Sales Orders be updated? 2.  How will processed, yet open custom

  • How do I correct the error message: Activation Limit reached for creative suite

    I have the software loaded on only TWO computers. A desktop computer running Win-XP and a recently purchased Win 8 laptop running windows 8 any help would be greatly appreciated.

  • WSDL generation wizard does nothing...

    I am attempting to use the beta 3 software to connect to Exchange 2007. Unfortunately, I dont see a dialog on the WSDL wizard to enter uid & password. I presume I can simply put "https://" in the uri field (Exchange requires https) but Exchange also

  • Définir les infos sur plusieurs éléments du menu d'exécution

    Bonjour à tous, Je souhaite agir sur les éléments d'un menu d'exécution. J'utilise jusqu'à présent la fonction « Définir les infos de l'élément de menu », mais en raison d'un grand nombre d'éléments, je dois souvent dupliquer cette fonction, et ça co

  • Arch freezing after install

    Hi! I have installed Arch and after restart it freezes when loading modules. Sometimes it loads them and fails in some configuring part, don't remember exactly what configuration. If i get it booted it freezes few minutes later. I have installed it m