Lion, Finder quits when copying a folder with idlk files (indesign cs4)

I have a network volume on solaris which I backup folders to the local desktop. if I drag the folder to the desktop in lion, it gives permission issues once it gets to the idlk file, the finder resets, disconnects the network drive and does not copy. If i use snow leopard, the finder works fine and skips the the .idlk from all these guys having open files on the server. This is disruptive for my backups because often users have files open. How do i skip or ignore the .idlk files when I am backing up entire directories?

This sounds like a Lion bug...File it with Apple...
Can you use a tool other than the Finder to do the backup? Perhaps you could use an Applescript Droplet or something.
Then you could try some other tool (perhaps 'ditto') to do the copy. Worst case you can copy the folder to a temporary location on the hard drive and then copy that copy to the Solaris server...

Similar Messages

After installing Mountain Lion finder quits when I open desktop folder - why?

After installing Mountain Lion, finder quits when I open desktop folders. Not all folders.. I does it to new ones.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

When client open folder with html files to preview web site, some pictures are missing when previewed.

However all images are in "images"folder. Same images are missing when previewed in Firefox and Explorer.
Any idea why?
Thanks.

Are you sending this other person all of the image files in
the same relative location as they are on your local computer?
For instance, if you are sending them index.html and your
images are in a folder called images, you should be sending them a
Zip file with the following enclosed:
index.html
images (folder)
image1.gif
image2.jpeg
If you are sending this type of structure to your other
party, check the links in code view. Make sure they are relative.
If they are, on the index.html page they would look like
images/image1.gif. If it says anything like C:/ or something that
points to a local drive they you will need to make sure the image
are within the site definition and then save the files
again.

Bridge CS4 freezes when I open a folder with avi files

Whenever I navigate to a folder with avi files, Bridge CS4 freezes. I have tried resetting my preferences, changing the file associations, but it still hangs. Both Windows and Bridge are set up to associate avi files with VLC Media Player. The files open and play just fine in VLC. I am running CS4 on a Win XP Pro machine. It used to not be a problem and I could play avi files in Bridge. I'm not sure when the problem started since I don't shoot a lot of video. Any ideas?

Thx for that im gonna try it....but is there a way to do it without using toolbar or cmd-c...? i mean using only the mouse?why does it have to highlight the file even though i click a bit next to it....?using icon view i can right click next to the folder and i wont have a problem but with list view that i prefer using it will highlight the whole row.....and i dont find free space to right click cause i got many files

When i use view as list in finder and open a folder with many files i cant right click with mouse without selecting or highlighting a file....i just want to right click to paste an item or create a new folder...what can i do?

When i use view as list in finder and open a folder with many files i cant right click with mouse without selecting or highlighting a file....i just want to right click to paste an item or create a new folder...what can i do?

Thx for that im gonna try it....but is there a way to do it without using toolbar or cmd-c...? i mean using only the mouse?why does it have to highlight the file even though i click a bit next to it....?using icon view i can right click next to the folder and i wont have a problem but with list view that i prefer using it will highlight the whole row.....and i dont find free space to right click cause i got many files

Finder crash when opening any Folder

I am a very experienced mac user and this one has me stumped. Im posting here to see if anyone else has this problem.
Finder crashes when opening a folder on the desktop
Finder crashes when using any option from the Go menu (or key combo) except Airdrop.
Once Finder window is open on Airdrop any navigation to home folder or any other folder using side bar causes Finder to crash.
Using Go To Folder causes crash, even on hidden folder like /var
Finder is OK when opening files on desktop
All other apps can browse file system and open/save OK
Google Drive is not present on system (this used to be an issue a long time a go that caused similar symptoms in other threads)
Drop Box is installed. But issue occurs even when dropbox is not running
Using spotlight to open applications still works normally.
Clicking the Finder icon in the Dock results in a non-functional blank window entitled "Window", all tool buttons are disabled.
Repeatedly opening the same folder over and over results in the message "The last time you open Finder, it unexpectedly quite while reopening windows. Do you want to try to reopen its windows again? If you choose not to reopen windows, you may have to open and position the windows yourself" Two options "Don't Reopen" and "Reopen". Both buttons have no effect except to dismiss the dialog.
Steps Taken to fix:
Booted into recovery mode and performed repair disk and Permissions - Finder Still Crashes
Removed finder preference files using terminal
~/Library/Preferences/com.apple.finder.plist
~/Library/Preferences/com.apple.sidebarlists.plist
Recent changes to system:
iTunes 11.4 Installed with normal Software Update.
Possible Cause of Problem
Found app in iTunes that has File Sharing enabled and has a shared folder. Curious as to what was in the folder i dragged it to my desktop and double clicked. Im not sure if iTunes would have had enough time to copy the contents of the folder before i tried to open the folder. Finder crashed. This was the first time it happened.
iPhone app in iTunes that I picked in was "Ubersense".

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can read it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p) if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ +N.+ =//p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' '" L*/P*/*loginit*' 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

I have configured PDF Genrataor in LiveCycle 2.5. When I place a folder (which has doc file in it) in the IN folder..I expect the OUT to contain same folder (with pdf file in it), But it does not happen.

I have configured PDF Genrataor in LiveCycle 2.5. I have configured my watchedfolder endpoints.
When I place a folder (which has doc file in it) in the IN folder..I expect the OUT to contain same folder (with pdf file in it), But it does not happen. What I see in in the OUT folder I see a pdf file with the foldername and pdf extension....
Can anyone suggest.......

Why do we have to install 2 add ins for something that should be built in? Please add this to the next version or an update to this one even. We should see the full path of a bookmark when we search for it. Show Parent Folder alone isn't enough if you have sub folders, so I installed Go Parent Folder as well in case of sub folders.

MPEG folder with .m2v files after build required?

When you build a project, I noticed the folder MPEG being created. does DSP create an MPEG folder with .m2v files?
Now, do you need this folder even after you BUILD the project. I don't understand why, the build folder is nearly 3GB as it is?

If there is a chance that you will have to make changes to your project, you should keep it.
Otherwise you can throw it out.

Create folder with multiple files (was: folders)

Can you create a folder with multiple files and direct the page to go to the folder and then the reader can select the file they wish to choose? Example Council Mintes Folder with a file for each set of minutes. The hyperlink would open the folder and then the reader would select whch set of minutes they'd like to see.

You may not have access to it depending on your hosting company and plan, but if you did have the ability to change it you'd normally do it in the admin area of your hosting account which would update the proper files on your server.
You may also be able to do it manually, but the "how to" depends on the server type you are running.
EDIT: I'd still suggest using a server script (like the PHP I linked to) because the look of a directory with browsing turned on is pretty ugly and can't be changes since it's not a page on your site. With the PHP I linked to, you could have an actual page for your links, complete with your site's design, that simply lists the files from the specified directory. It's very simple to set up if you have PHP on your server.

Finder quits when draging a web photo into a folder??

folders go blank and re-appear or the finder quits and i have to click restore folders....never had this problem before i upgraded to mavericks.....any help would be welcomed....thanks

This sounds like a Lion bug...File it with Apple...
Can you use a tool other than the Finder to do the backup? Perhaps you could use an Applescript Droplet or something.
Then you could try some other tool (perhaps 'ditto') to do the copy. Worst case you can copy the folder to a temporary location on the hard drive and then copy that copy to the Solaris server...

My finder quits when accessing my Drobo External Hard Drive iMac Dual Core 24"

My Finder Quits Every time I access my External Drobo 8TB Firewire Drive. I have several other FireWire Drives online with it and have no problem with them. This happened soon after the 10.7.2 update. I have a lot of files on this drive. Could it be the number of files that is causing the problem? Is there a Limit onnumber of folders on the surface of a drive? Please help if you can, I am desperate to preserve my software. But I need to do something soon, Or else I will have to just reformat the drive so I can use it again. I don't really want to do that.
Thanks in advance for any comments or cures.
Rev

I had the same problem but only after I upgraded to Lion. I could see the files on my external drive on other Macs using older software. It seems that Lion wasn't seeing old files on the external drive. So we accessed the files on a Mac using Snow Leopard, copied all the files into one new folder on the same external hard drive and now they're there on Lion. Problem solved! I hope this helps

Finder Quits When Showing Image Preview

Since my upgrade to Leopard, Finder frequently quits.
For example: In frame view: I open a folder with many photos, before even looking at the frame-view preview (in the right), Finder quits.
Similarly, this happens when I'm changing views from List to Frame-View to Quick-View, etc.
This mainly happens with images (of all sizes.)
Any ideas?

Where did the images come from? Perchance out of Adobe's image management program? Did you add any info to them? There is a serious incompatiblity going on between image info formats from Adobe and the Finder. One hopes this will get fixed with the 10.5.2 update. See this thread, among many:
http://discussions.apple.com/thread.jspa?messageID=6144463
Not good.
Francine
Francine
Schwieder

Finder issues when copying large amount of files to external drive

When copying large amount of data over firewire 800, finder gives me an error that a file is in use and locks the drive up. I have to force eject. When I reopen the drive, there are a bunch of 0kb files sitting in the directory that did not get copied over. This is happens on multiple drives. I've attached a screen shot of what things look like when I reopen the drive after forcing an eject. Sometime I have to relaunch finder to get back up and running correctly. I've repaired permissions for what it's worth.
10.6.8, by the way, 2.93 12-core, 48gb of ram, fully up to date. This has been happening for a long time, just now trying to find a solution

Scott Oliphant wrote:
iomega, lacie, 500GB, 1TB, etc, seems to be drive independent. I've formatted and started over with several of the drives and same thing. If I copy the files over in smaller chunks (say, 70GB) as opposed to 600GB, the problem does not happen. It's like finder is holding on to some of the info when it puts it's "ghost" on the destination drive before it's copied over and keeping the file locked when it tries to write over it.
This may be a stretch since I have no experience with iomega and no recent experience with LaCie drives, but the different results if transfers are large or small may be a tip-off.
I ran into something similar with Seagate GoFlex drives and the problem was heat. Virtually none of these drives are ventilated properly (i.e, no fans and not much, if any, air flow) and with extended use, they get really hot and start to generate errors. Seagate's solution is to shut the drive down when not actually in use, which doesn't always play nice with Macs. Your drives may use a different technique for temperature control, or maybe none at all. Relatively small data transfers will allow the drives to recover; very large transfers won't, and to make things worse, as the drive heats up, the transfer rate will often slow down because of the errors. That can be seen if you leave Activity Monitor open and watch the transfer rate over time (a method which Seagate tech support said was worthless because Activity Monitor was unreliable and GoFlex drives had no heat problem).
If that's what's wrong, there really isn't any solution except using the smaller chunks of data which you've found works.

Copy to folder WITH metadata

I was clearing off some photos I rarely use into a folder I was going to store on my ext drive. Afterwards I realized I had put some on there that I needed. When I reimported them they went to the end of the line rather than where they originally were.
I was wondering how to export them to a folder with the metadata intact.
Thanks in advance
Rob

Rob
WHy not have a second iPhoto Library on the external drive?
Simply copy the iPhoto Library Folder from your Pictures folder to the External. Then, hold down the option (or alt) key key and launch iPhoto. Select 'Choose Library' and navigate to the external.
Now you have a secnd library on the HD. From it, delete any pics you don't want in it.
Then repeat the option (or alt) key trick and select 'Choose Library' again. This time navigate to the Pictures Folder and pen that Library. From it, delete the pics you don't want there.
iPhoto Library Manager will make the proces of moving pics and metadata from library to library much simpler.
Regards
TD

Finder quits when try to access windows share

Hi all,
One of our G5 with 10.4.4, have a typical trouble.When the user try to access a windows server share, the finder quits.All other users with G5, 10.4.4 has no troubles with accessing the same server.I created a test account with the particular user who has the trouble, and it works fine with the windows server. Any one has an input to this?
Thanks in Advance,
Zac.

Hi Zac,
You might have better luck in the sharing and networking forum.
Richard
AL PB, 1.5GHz, 1GB RAM; G5, Dual 1.8GHz, 1 GB RAM Mac OS X (10.4.5)

Lion, Finder quits when copying a folder with idlk files (indesign cs4)

Similar Messages

Maybe you are looking for