Lion - how get up to date.
I am still using Snow Leopard but have put Lion on a SuperDuper bootable clone on external drive (Lion has this whole drive to itself). I have just got it up to 10.7.3. The point is, the clone is getting more and more out of date and I am wondering what the best way is to get it up to date at some point? I have saved the Lion install file, so do not need to download again. Is this the way to do it - erase the Lion drive, put new SuperDuper clone (10.6.8) on it, install Lion on that, then get Lion up to date 10.7.3 or 10.7.4, whatever? Just wondered what the most elegant solution is. Thanks.
Something is getting lost in the details here....
When I say side by side, I mean two partitions.. both of them on an internal disk not with an external and internal disk.
Whne you ask "files on the Lion side are four months old", do you mean system files or applicaiton libraries like iTunes and your own peronal files? If you mean Lion system files you just need to install the 10.7.3 Combo update.
The easiest thing is to upgrade your old Snow Leopard 10.6.8 to Lion 10.7.3 , then sync with your backup.
Similar Messages
-
Just transferred my iTunes data from Snow Leopard to Lion ( Both same version of iTunes} and I am getting a message saying the iTunes will no longer sync Photos to my iPhone. Has something been changed as far as photo syncing?
hassiman wrote:
Just transferred my iTunes data from Snow Leopard to Lion
How?
Just copy the entire /Music/iTunes/folder (or use Migration Assistant to copy User folder).
What is the exact message? -
i keep getting "an error occurred when installing, please run program again" for OS X mountain lion, how can i fix the problem?
The Reset feature adds a folder on your desktop named Old Firefox Data. I recommend hanging onto that for a few weeks in case you discover something essential that the Reset feature left behind.
This article has a list of what is migrated and what is not during a Reset, in case you're curious: [[Reset Firefox – easily fix most problems]]. -
Just upgraded to Lion, how can I use my microsoft office especially excel. I'm getting messages that it's no longer supported. This is a BIG problem. Help, please.
Apple has made a serious error not advising people when the Lion upgrade occurs that their present software may/will not be compatible and advise the user of such before and allow a opt out.
All you can do (besides upgrading all your software) is backup your data off the machine (not to TimeMachine) and disconnect all drives.
Hold c boot off the 10.6 disk and erase your makers hard drive on the far left, (that's the entire drive of everything)
Partition tab: Option: GUID, format OS X extended and click apply so you get a new GUID (replacing the Lion one or trouble occurs later)
Quit and install 10.6, then go through setup and use the same name as before, then update to 10.6.8
Then c boot off the 10.6 disk again and use Disk Utility to Repair the disk the 10.6.8 update messed up.
Then install all your programs again from fresh sources and lastly your user files in the same main user folders as before (music, pictures, documents etc.)
Done as described will get you back just like it was before as close as possible, make SURE to use the same username or else your iTunes and other files get all messed up. Password and drive name can be different though if you wish.
Note: if you've upgraded from 10.5 to 10.6, then you don't get the free iLife as it's not on the 10.6.3 white disks, only on the disks that came with your machine. So that will have to be purchased and reinstalled or use Pacifist to extract it from the 10.5 disks.
This handy site can advise you what software doesn't work with the Lion.
http://roaringapps.com/apps:table -
How do I use Display Dialog to get back a date?
Can anyone tell me how to use Display Dialog to get back a date?
I am using the following code that does not work. It does not accept anything. And I have searched high and low for an answer to my question and found nothing.
repeat
display dialog "When should I remind you (date)?" default answer ""
try
if the text returned of the result is not "" then
set the requested_text to the date returned of the result as date
exit repeat
end if
on error
beep
end try
endrepeat
display dialog requested_text
The code is based on what I found in AppleScript 1-2-3 (page 300). It shows examples for getting text and numbers but not one for dates.
For what it is worth, my goal is to create a script that will convert an email from Evernote into an iCal Reminder. To do so, I want to ask the user (myself) for the reminder's date and time. I am assuming I need to ask for each separately. I also assume that once I get the date and time for the reminder, it should be relatively straightforward to 'make' a 'todo' with an alarm.
Thanks in advance.
-DavidHi David,
Try this:
repeat
set theCurrentDate to current date
display dialog "When should I remind you (date)?" default answer (date string of theCurrentDate & space & time string of theCurrentDate)
set theText to text returned of result
try
if theText is not "" then
set theDate to date theText -- a date object
exit repeat
end if
on error
beep
end try
end repeat
display dialog (date string of theDate & space & time string of theDate)
You might also have a look at this page of the AppleScript Language Guide.
Message was edited by: Pierre L. -
How can i get the meta data from database?
Hi, all java and db experts,
I need to write a tool to generate java file which will be used to hold the resultset of a stored procedure of Oracle. Is there any API call or tools to connect to db and then get the meta data of the return cursor instead of reading stored procedure definition on my own?
Please help, thanks a lot.
Hannaif i execute a Oracle stored procedure, the resultset of a cursor is returned. It's easy to know the meta data at the runtime.
However, could i get the meta data about the resultset of a cursor before runtime? Such as by connecting to the database and ask it about meta data of a specified stored procedure?
Is it feasible?
DatabaseMetaData dbmd = conn.getMetaData();
ResultSet rs = dbmd.getProcedureColumns("", "%", "SP_NAME", "%");
while (rs.next()) {
String colName = rs.getString(4);
int colType = rs.getInt(5);
int colDataType = rs.getInt(6);
int colPrecision = rs.getInt(8);
int colLen = rs.getInt(9);
int colScale = rs.getInt(10);
long defaultValue = rs.getLong(11);
But what i get is a list of stored procedure parameters. In oracle, cursor is IN OUT parameter . How can i get the meta data about the resultset of cursor? -
How can I get the image data from Clipboard with LV
Anybody knows How can get the image data after pressd "print screen button" with LV?
I want to program a software which can save a image as a bmp or jpeg etc, and the image data is from pressed print screen button.
How to get it out from clipboard. I am trapping about. thanks in advance.
Try to make everything AutomaticYou can have a look at Rolf Kalbermatter's post here (give him stars) or, if you're using scripting, you can use the Application class Get Clipboard Image method.
Try to take over the world! -
How to Get the Current data into Planning Layout from the Planning cube
Hi,
I have a problem in BPS. I am selecting the data from cube based on Month org details but I want to see the latest data. How can i get this data into planning cube.
Like
data
Tran cal month org amt
1 jan a 100
1 feb a 200
if i want to read based on Tran org as input values I shoud get the below data but I am getting the previous data.
Tran cal month org amt
1 feb a 200
Kindly help me in this regard
Thanks
NaveenNaveen,
Are yo having issue when you save something in the layout, the data doesn't appear in the listcube ? Or do you have issue that the latest data you see in the cube doesn't appear in the layout ?
For the former issue, please look at your selections of listcube and for the second issue, please check your planning level definition, make sure all the restrictions you have applied are valid for this latest data to be presented in the layout.
Hope this helps.
Cheers
Srini -
How to get the actual data in ALV report
I am doing some upgradation work in that i am using Submit & And return and also i am using some function modules like LIST FROM MEMORY , LIST TO TXT wnd WRITE LIST , it gives output in normal list format , But i need to print in ALV report .
With the use of set table for 1st display i got the ALV report but not with actual data, (some junk value is showing) , So can any 1 suggest me how to get the actual data in ALV report, With the use of Any Function Module or with Coding,
with regards,Hi Saravana
I am sure you must be getting the values in tables of table parameters from every FM.
consolidate the values from tables of all FMs in one table and built ALV for that table only.
I hope this way you can show the actual data in ALV.
thanks
Lalit -
How to get the Delivery date in PO line Item in SAPScript
Hi Gurus,
I am working on PO Script (MEDRUCK). I copied the Standard to a Z form. ZMM_MEDRUCK, Now I need to print the the Header text at the end of MAIN window. I put Iem number along with the other line Item informmation like stanadrd PO Script MEDRUCK. I also want to show the delivey date with line Item, so Itried to use EKET-EINDT but it is returning the delivery date of last line item, means while printing the first line and other information it is showing the delivery date of the last line item, I tried with the PEKPO-EINDT it is also not working.
Can any body suggest me how i can get the delivery date for the respective line Item ?
Regards
Sonyactually your are picking up the correct data from Table EKET (EKET-EINDT) but your are printing that in item data loop for EKET might have already executed in your script and the header of that internal table consist the last entry of the table so for that. Fetch the delivery date explicite from the Table EKET when your in item level processing and print that.
For Example u can use this code.
To print you have write the this code in Script item level printing window "MAIN" window
Following perform is called to get the line item delivery date in PO
{/: PERFORM GET_DEL_DATE IN PROGRAM ZPerform_prog
/: USING &EKPO-EBELN&
/: USING &EKPO-EBELP&
/: CHANGING &DEL_DATE&
/: ENDPERFORM}
{* Dellivery date &DEL_DATE& }
write the below code in the Z program "ZPerform_prog"
{ FORM get_del_date TABLES in_par STRUCTURE itcsy
out_par STRUCTURE itcsy.
READ TABLE in_par WITH KEY 'EKPO-EBELN'.
CHECK sy-subrc = 0.
$_po_no = in_par-value.
READ TABLE in_par WITH KEY 'EKPO-EBELP'.
CHECK sy-subrc = 0.
$_po_line = in_par-value.
SELECT *
FROM eket UP TO 1 ROWS WHERE ebeln EQ $_po_no AND ebelp EQ $_po_line.
$_del_date = eket-eindt.
CALL FUNCTION 'CONVERT_DATE_TO_EXTERNAL'
EXPORTING
date_internal = eket-eindt
IMPORTING
date_external = $_del_date
EXCEPTIONS
date_internal_is_invalid = 1
OTHERS = 2.
READ TABLE out_par WITH KEY 'DEL_DATE'.
CHECK sy-subrc EQ 0.
out_par-value = $_del_date.
MODIFY out_par
INDEX sy-tabix.
CLEAR : $_po_no , $_po_line ,$_del_date.
ENDSELECT.
ENDFORM. "GET_DEL_DATE } -
Hi, I have a new cell phone, I wanted to give my iphone to my father, instead of deleting the content on the iphone I have deleted the entire iphone. It starts up no more. iTunes will not recognize the iphone. How do I get my old data back onto the phone?
Place the device in DFU mode (google it) and restore as new.
-
Introduction
In SQL Server Reporting Services, we can define a mapping between the fields that are returned in the query to specific delivery options and to report parameters in a data-driven subscription.
For a report with a parameter (such as YEAR) that allow multiple values, when creating a data-driven subscription, how can we pass a record like below to show correct data (data for year 2012, 2013 and 2014).
EmailAddress Parameter
Comment
[email protected] 2012,2013,2014 NULL
In this article, I will demonstrate how to configure a Data Driven Subscription which get multi-value parameters from one column of a database table
Workaround
Generally, if we pass the “Parameter” column to report directly in the step 5 when creating data-driven subscription.
The value “2012,2013,2014” will be regarded as a single value, Reporting Services will use “2012,2013,2014” to filter data. However, there are no any records that YEAR filed equal to “2012,2013,2014”, and we will get an error when the subscription executed
on the log. (C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVER\Reporting Services\LogFiles)
Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportParameterException: Default value or value provided for the report parameter 'Name' is not a valid value.
This means that there is no such a value on parameter’s available value list, this is an invalid parameter value. If we change the parameter records like below.
EmailAddress Parameter Comment
[email protected] 2012 NULL
[email protected] 2013 NULL
[email protected] 2014 NULL
In this case, Reporting Services will generate 3 reports for one data-driven subscription. Each report for only one year which cannot fit the requirement obviously.
Currently, there is no a solution to solve this issue. The workaround for it is that create two report, one is used for view report for end users, another one is used for create data-driven subscription.
On the report that used create data-driven subscription, uncheck “Allow multiple values” option for the parameter, do not specify and available values and default values for this parameter. Then change the Filter
From
Expression:[ParameterName]
Operator :In
Value :[@ParameterName]
To
Expression:[ParameterName]
Operator :In
Value :Split(Parameters!ParameterName.Value,",")
In this case, we can specify a value like "2012,2013,2014" from database to the data-driven subscription.
Applies to
Microsoft SQL Server 2005
Microsoft SQL Server 2008
Microsoft SQL Server 2008 R2
Microsoft SQL Server 2012
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.For every Auftrag, there are multiple Position entries.
Rest of the blocks don't seems to have any relation.
So you can check this code to see how internal table lt_str is built whose first 3 fields have data contained in Auftrag, and next 3 fields have Position data. The structure is flat, assuming that every Position record is related to preceding Auftrag.
Try out this snippet.
DATA lt_data TYPE TABLE OF string.
DATA lv_data TYPE string.
CALL METHOD cl_gui_frontend_services=>gui_upload
EXPORTING
filename = 'C:\temp\test.txt'
CHANGING
data_tab = lt_data
EXCEPTIONS
OTHERS = 19.
CHECK sy-subrc EQ 0.
TYPES:
BEGIN OF ty_str,
a1 TYPE string,
a2 TYPE string,
a3 TYPE string,
p1 TYPE string,
p2 TYPE string,
p3 TYPE string,
END OF ty_str.
DATA: lt_str TYPE TABLE OF ty_str,
ls_str TYPE ty_str,
lv_block TYPE string,
lv_flag TYPE boolean.
LOOP AT lt_data INTO lv_data.
CASE lv_data.
WHEN '[Version]' OR '[StdSatz]' OR '[Arbeitstag]' OR '[Pecunia]'
OR '[Mita]' OR '[Kunde]' OR '[Auftrag]' OR '[Position]'.
lv_block = lv_data.
lv_flag = abap_false.
WHEN OTHERS.
lv_flag = abap_true.
ENDCASE.
CHECK lv_flag EQ abap_true.
CASE lv_block.
WHEN '[Auftrag]'.
SPLIT lv_data AT ';' INTO ls_str-a1 ls_str-a2 ls_str-a3.
WHEN '[Position]'.
SPLIT lv_data AT ';' INTO ls_str-p1 ls_str-p2 ls_str-p3.
APPEND ls_str TO lt_str.
ENDCASE.
ENDLOOP. -
I have made a burn folder with photos exported from I-photo. It now shows in information, that the date created and modified is different from the original digitized date. How can I get the original date to show in the info from Finder?
The Finder reports File information. The date and time of the photo are in the Photo's Exif metadata. The Finder has no awareness of this. All photos apps on any system do.
Regards
TD -
How to get current row data in table control
Hi , expert ,
I am professional in oracle , but now I am a new guy in SAP ABAP .
I have a question in UI
How to get current row data and click pushbutton in table control to open next screen ?
I want to get the current data and open next screen to carry out detail detail .
Thansk for all your suggestion .GET CURSOR LINE SY-CUROW .
READ TABLE internal_table index SY-CUROW. -
How to get selected row data of an ADF table in HashMap?
Hi,
Can anyone please tell me how to selected row data of an ADF table in HashMap like :
Object obj = pageTable.getSelectedRowData();
JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)obj;
Now in above code I want the convert rowData in HashMap.
Can anyone please tell me how to do that? Its urgent.
Thanks,
VikVik,
No need to ask the same question 3 times...
In [url http://forums.oracle.com/forums/message.jspa?messageID=4590586]this post, Nick showed you how to get the Row.
If it were so urgent, you could have done a little reading of the javadocs to come up with code like this (not tested, up to you to do that)
HashMap m = new HashMap();
Row r = get it like Nick showed you to;
Object values[]=r.getAttributeValues();
String names[]=r.getAttributeNames();
for (int i=0; i<r.getAttributeCount(); i++)
m.put(names, values[i]);
Maybe you are looking for
-
Exchange 2013 SP1 Installation Error in "Mailbox Role: Transport service"
I tried an installation last week on a Windows Server 2008 R2 but was unable to get it to work. With the value of hindsight, I am inclined to think the error was more with the Web Site making EAC unavailable. I subsequently got it installed in my per
-
My iMac osx 10.4.11 no longer recognizes my iphone
I've been using my iMac for my iPhone 3GS for 2 years, suddenly it no longer recognizes my iPhone when I try to update it. I'd appreciate any assistance.
-
Problems with the home button and generally freezing and shutting down often.
I have had this iPad 2 for around 3 months. After about a month I noticed that I was having to press the home button multiple times in order to get it to respond. It is now at a stage where I have to press it as many as 12-13 times. It's won't do thi
-
Black Line going through middle of screen, getting bigger by the day.
Hi, I was wondering if you would be able to help me fix this problem. My HP Omni 120-1034 Desktop PC was working fine until 2 weeks ago when a thin lack line appeared through the middle of the screen going horizontally. It is getting darker and bigg
-
Solaris 10 06/06 x86 install Unable to run cmd: /usr/sbin/sysidput
Hello, When I install Solaris 10 06/06 on my x86 machine, I follow all of the prompts. Eventually , I get to a place in the X Windows GUI where I enter my IP, netmask, Router IP, DNS server IPs, domain, and search list. I get an error at the end of t