Lion installer hangs up
I installed anti virus software, ran a scan, it quaratinedx a file and now my installer hangs. Has anyone got a solution, can i download the installer?
There's far too little information to say anything. What anti-virus software? What file was quarantined? What installer is giving you trouble?
Similar Messages
-
Lion Installation Hangs Up at "checking Macintosh HD"
I am trying to install Lion and it keeps hanging up at "checking Macintosh HD". The progress report says, "Running OS Build", and sits there for hours.
I have a MacBook Pro circa mid 2010, Intel Core 2 Duo, 4Gb 1064 DDR3, and 165.06 Gb free space on my hard drive. I have rebooted. I have repaired permissions.
I'd like to avoid a clean load, if possible. Am I missing something here?Boot from a clone or your Install CD. Open Disk Utility and select Repair Drive.
If you don't have a clone, I highly advise you create a clone first. This will give you the opportunity to revert to Snow Leopard if needed. You can't boot from Time Machine.
Both of these applications can be used to create a clone. You will need an external drive for the backup.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html -
Installer hangs on calculating screen OSX 10.7 (Lion)
I have tried multiple times and multiple systems but installer always hangs when trying to install OSX with CS5 master collection.
If I do fresh install of 10.6 (Snow Leopard) I can install MC CS5. Then when I try to install 10.7 upgrade it hangs.
If I try to install fresh 10.6 then upgrade to 10.7 and install MC CS5 the installer hangs.
Is there any sort of workaround?
Thank you.This is actually occuring on 5 computers.
I have a 2 seat license and it installed and still installs fine on OSC 10.6.
The only one install that has worked is on OSX 10.7 server on a vmware virtual machine.
Same results trying to get the combination to work on all other machines.
The real kicker is that I can install MC CS5.0 on 10.6 fine.
And I have tried on machines with fresh installation as well as existing installation.
Any other ideas. -
Installation hangs - OSX upgrade on MacBook Air
I am attempting to upgrade OSX on my MacBook Air. The installation hangs at "Time remaining: Less than a minute" and eventually cycles off. The error log indicates "missing CoreServices." This has been going on for > 24 hours. Any advice?
Tried to upgrade a Macbook Air with 10.6.8 Snow Leopard to Mavericks from the Apple store. Nothing seemed to happen when clicking on the dowload button and the request APPEARED to hang. The download button changed to a light grey for a few seconds, then came back as a clickable download button. There was no progress bar in the downloads section. This problem is known to Apple but was not solved as of November 1, 2014.
In fact, the upgrade download button did trigger the download. The only indication one gets is in the dock, where the OS X icon will show only "Download... ". There is a minuscule progress bar under the icon and it will take 30 minutes or so before progress starts to show in blue!
If you use an internet wire connection with a router (without other computers connected), rapidly blinking lights on the router will confirm high traffic to the MacBook Air.
The complete download took over 3 hours, via the USB/ethernet port. I also made sure the computer had power supplied by the wall charger. For some reason, the download caused the light on the magnetic plug of the charger cable not to show red or green, and the battery remaining time was not operational on the computer screen.
Installation took more than double the time shown as remaining. You just have to be patient.
After rebooting, the fan was constantly on and the battery remaining time was still not functional on the header bar. It took about an hour for Spotlight to re-index the computer.
All upgrade activities completed, after restarting the computer, the fan was running loudly and the battery remaining time was not working.
I tried the following as recommended for a similar problem reported after installation of Mountain Lion. By pressing Control-Shift-Option and the power button all at once for a second, the computer switched off. Pressing the power button to restart the computer showed everything was back to normal: no fan noise, and the battery remaining time percentage works again. Plugging in the charger also brought again the red charging light. -
BI 7.0 Java Add-on installation hangs
Hi Guru's
While doing upgrade of BW 3.5 (Netweaver 2004) to BI 7.0 (Netweaver 2004s) during Java Add-on installation at "Database Instance Java Add-in" phase the installation hang on "Import Java dump" phase.
I have tried to kill and restart the installation 2-3 times and restarting the complete installation once again it stops at the same phase. Kindly let me know what can be the reason because we have not face this issue in DEV and QA environment. It is my production server.
The environment is HP-UX IA64 with oracle 10g.
Thanks in advance.Hi Rajesh,
What stage is the installation hanging at ?
Please provide any error info from sapinst_dev.log
Check if java engine is installed and is up and running or not.. You could check the j2ee work directory under which you find j2ee stack related traces.
e.g. check std_server0 to see if the server is up or not
Please send more details
Regards,
Snehal -
CRM 2015 installation hangs without errors on Windows Server 2012 installed in a VM
I have installed a Windows Server 2012 and SQL Server 2012 on a VM using VMware Player and then installed Dynamics CRM 2013, working out all the configuration problems.
The installation hanged once without errors and when I tried it again it was installed, no problems. Dynamics CRM 2013 works without issue.
Then I copied the machine, uninstalled the Dynamics CRM 2013 and started installing CRM 2015. However this time without errors the installation hangs even though I tried more than 5 times.
There are no errors, installation program is not unresponsive and task manager shows nothing out of the ordinary.
I have also tried this on multiple physical and virtual PCs to no avail.Try to Delete the registry files of CRM before you start the installation : HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSCRM
-
I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation.
I own a late 2009 Macbook Pro, and it keeps freezing after OSX Lion installation. I will post my computer's 'specs' below. I installed Lion, from Snow Leopard, through the App store. The first week, it worked like a dream, and was loving my brand new computer, or so it seemed. I then began to run into problems, and I can't confirm this 100%, but I believe it was after I updated from 10.7.1, to 10.7.2.
The freezes are sporatic at best, and cannot be narrowed down to one app. I googled the issue about two weeks ago, and found a fix involving a temporary log-in, verifying the disk, restarting the computer holding CMD+R, and repairing the disk from there. That fixed the problem. For about three or four days. From there I brought my laptop to Best Buy, where I purchased the computer (start the groans, my dad wanted the accidental damage, and he was paying, there was no argument). My warranty there was still good, but all they were offering was to check my hard-drive, and possibly ship it out. That would not be good for me, as I am a High School student, who works online.
So I then decided to go to the Apple store, see what they said. They said a bunch of people had this problem, it would cost a lot to fix, as I would need a new Logic Board. This did not make any sense to me, as I knew it was Lion's fault, so why would they not make the L-2009MBP Logic Board compatible, and why are only a few people having this problem, well a lot more than a few, but I mean not everyone.
So I asked a friend about it, and we decided to run a back up, and erase the computer, and re-install Lion. Figuring maybe my data was corrupted during install. This helped for a day or two, and happened again. So this time, we backed up only files (music, pics, documents, etc.,) and did a fresh install. I got my computer back last night. Now, I am not saying that didn't help. Previously I would have frozen about 18 times well writing this, but I have not frozen once (hopefully I didn't just jinx myself). I have gone from about one freeze every 10-15 minutes (sometimes worse), to about one every 1-3 hours. Which, let's be honest is still a lot.
So, before I just decide to go and revert to Snow Leopard on my merry way, I ask, do any of you have any other ideas? Or guarenteed fixes? I know a guarentee is a hard thing to ask for, but I am desperate, my teachers are getting angry with me for not sending work, and I know this would help a lot of people. Thank you to those who read through my whole spiel, and thank you to those who will help me!
[Ps, while I am somewhat of a noob, I know my way around a computer, so any help, or knowledge you could bestow upon me is awesome. Especially DIY fixes. (if your only advice is, don't buy a mac at Best Buy, don't bother commenting)]
Macbook Pro
15-inch, 2.53GHz, Mid 2009
Processor: 2.53 GHz Intel Core 2 Duo
Memory: 4 GB 1067 MHz DDR3
Graphics: NVIDIA GeForce 9400M 256 MB
Software: Mac OS X Lion 10.7.2 (11C74)Once it is downloaded you need to restart the computer if it does not restart automatically. When it next starts up you should note a progress bar appearing below the Apple logo. When done the computer will restart once more. The new firmware should now be installed.
-
please help me!!!! my macbook pro 15 running on mountain lion is hanging a lot...sometimes when i use any app than it get freeze for some seconds...what should i do?
Hardware Information:
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
System Software:
OS X 10.8.2 (12C60) - Uptime: 0 days 1:17
Disk Information:
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (424.92 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
FireWire Information:
Kernel Extensions:
Problem System Launch Daemons:
[failed] com.apple.coresymbolicationd.plist
Problem System Launch Agents:
[failed] com.apple.afpstat.plist
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.rcd.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
[loaded] com.adobe.CS5ServiceManager.plist
[loaded] com.google.keystone.agent.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.facebook.videochat.Akshay.plist
[loaded] com.microsoft.LaunchAgent.SyncServicesAgent.plist
User Login Items:
Sony Ericsson Bridge Helper
BitTorrent
uTorrent
3rd Party Preference Panes:
Flash Player
Java
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
googletalkbrowserplugin.plugin
JavaAppletPlugin.plugin
npgtpo3dautoplugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
User Internet Plug-ins:
Google Earth Web Plug-in.plugin
Picasa.plugin
Bad Fonts:
None
Top Processes:
14.6 % WindowServer
6.9 % coreaudiod
6.4 % uTorrent
1.9 % WebProcess
1.4 % iTunes
1.2 % EtreCheck
0.5 % fontd
0.2 % NotificationCenter
0.1 % Dock
0.0 % Microsoft -
HT1338 Mountain Lion installation was interrupted - can't restart the download.
My Mountain Lion installation was interrupted. Now, when I try to download, it won't do it. After clicking "Download" it pauses for a moment, and then nothing happens.
Any suggestions? Thanks!
- Jeff TThe server is too busy and your connection timed out with the server. Try doing this at night because there is less traffic.
-
Oracle VM 3 Manager installation hangs Step 8 of 9 on Weblogic error
Hi all,
I am installing Oracle VM 3.0.3 Manager component for Oracle VM on RHEL 5.5 64 bit Linux OS platform.
1) The installation hangs on the following step
Step 6 of 9 : Oracle VM ...
Retrieving Oracle VM Manager Application ...
Extracting Oracle VM Manager Application ...
Installing Oracle VM Manager Core ...
Step 7 of 9 : Domain creation ...
Creating Oracle WebLogic Server domain ...
Starting Oracle WebLogic Server 11g ...
Configuring data source 'OVMDS' ...
Creating Oracle VM Manager user 'admin' ...
Step 8 of 9 : Deploy ...
Deploying Oracle VM Manager Core container ...
2) Reviewing the OVM 3.0.3 Manager installation logs shows the following errors:
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Connecting to t3://localhost:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'base_adf_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Location changed to edit tree. This is a writable tree with
DomainMBean as the root. To make changes you will need to start
an edit session via startEdit().
For more help, use help(edit)
Connecting to t3://localhost:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'base_adf_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Location changed to edit tree. This is a writable tree with
DomainMBean as the root. To make changes you will need to start
an edit session via startEdit().
For more help, use help(edit)
Starting an edit session ...
Started edit session, please be sure to save and activate your
changes once you are done.
Saving all your changes ...
Saved all your changes successfully.
Activating all your changes, this may take a while ...
The edit lock associated with this edit session is released
BUILD FAILED
weblogic.Deployer$DeployerException: weblogic.deploy.api.tools.deployer.DeployerException: Task 0 failed: [Deployer:149026]deploy application ovm_core on AdminServer.
Target state: deploy failed on Server AdminServer
java.lang.Exception: [DeploymentService:290051]The commit message for the deployment '1,331,919,570,897' could not be completed because the deployment timed out.
at weblogic.deploy.service.internal.adminserver.AdminRequestStatus.signalCommitFailed(AdminRequestStatus.java:1007)
at weblogic.deploy.service.internal.statemachines.adminserver.AwaitingCommitResponses.requestTimedOut(AwaitingCommitResponses.java:42)
at weblogic.deploy.service.internal.adminserver.AdminRequestImpl.requestTimedout(AdminRequestImpl.java:354)
at weblogic.deploy.service.internal.RequestImpl$TimeoutMonitor.timerExpired(RequestImpl.java:242)
at weblogic.timers.internal.TimerImpl.run(TimerImpl.java:273)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
3) Previous weblogic errors that caused the OVM 3.0.3 Manager installation to hang and fail:
Your environment has been set.
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
user: weblogic
timeout: 300
Connecting to t3://localhost:7001 with userid weblogic ...
This Exception occurred at Fri Mar 16 10:33:13 PDT 2012.
Connecting to t3://localhost:7001 with userid weblogic ...
This Exception occurred at Fri Mar 16 10:34:27 PDT 2012.
Connecting to t3://localhost:7001 with userid weblogic ...
Successfully connected to Admin Server 'AdminServer' that belongs to domain 'base_adf_domain'.
Warning: An insecure protocol was used to connect to the
server. To ensure on-the-wire security, the SSL port or
Admin port should be used instead.
Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
For more help, use help(domainRuntime)
Current status is RUNNING
Disconnected from weblogic server: AdminServer
03-16 10:34 system.process DEBUG system.process.run stderr:
javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://localhost:7001: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused; No available router to destination]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:788)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:366)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at weblogic.management.scripting.WLSTHelper.populateInitialContext(WLSTHelper.java:520)
at weblogic.management.scripting.WLSTHelper.initDeprecatedConnection(WLSTHelper.java:573)
at weblogic.management.scripting.WLSTHelper.initConnections(WLSTHelper.java:313)
at weblogic.management.scripting.WLSTHelper.connect(WLSTHelper.java:203)
at weblogic.management.scripting.WLScriptContext.connect(WLScriptContext.java:61)
at weblogic.management.scripting.utils.WLSTUtil.initializeOnlineWLST(WLSTUtil.java:147)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Any ideas how to resolve these issues so that I can successfully install OVM 3.0.3 Manager?Issue resolved had to disable Linux firewall
-
Windows 7 installation hangs on 'completing installation' in boot camp
hi
i am trying to install windows 7 ultimate 32 bit using boot camp and each time i have tried (except on one occasion) the installation has hanged on the 'completing installation' stage. i initially had this problem, then one time it worked, but then i had to wipe my boot camp partition and start again, and since then no joy in installing windows 7 again.
when the installation hangs it sounds like the install DVD is making a whirring sound as though there is an issue reading the DVD. but i have tried two different windows 7 install DVDs in both drives on my Mac Pro and i keep getting the same problem.
i have tried installing without any peripherals plugged in, including my cinema display, but still no joy, except for that one occasion, when i am not aware of having done anything different.
the boot camp partition is 32GB, and i have the same issue whether starting the installation using the boot camp assistant, or just booting from the Windows DVD and formatting the boot camp partition during the install.
can anyone help me troubleshoot this?
thanks
nickOn a Mac Pro with four hard disks, you would be better off devoting an entire HDD to Windows. You do not even need to start the Boot Camp Assistant application.
However, that does not appear to be the problem. Perhaps the size of your Windows partition is a bit on the smallish side. Why so small? Have you tried a larger partition? Going larger would be a good experiment to help drill down to the installation problem.
Try to eliminate anything under your control that could be part of the problem.
At 32GB that's the borderline between being permitted to use FAT32 formatting and being required to employ NTFS. Presumably, you allowed the installer to use NTFS. In fact I think Win7 requires NTFS. Switch the partition size a little down or a little up to eliminate that as a possible glitch point. Just a thought and probably a stupid one but you never know...
An afterthought: Can you get hold of a FireWire DVD optical drive. Maybe the internal drive is faulty. -
I am trying to install Adobe Reader my wife's laptop but "installer" hangs up and fails with a blank black screen. The machine is capable and has a Vista OS. My wife blames the machine and wants to "throw it out." She's an idiot but I need to get this fixed.
run the cleaner (Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then retry installing.
-
Installation hangs with Third Party Source component
Hi,
The installation hangs when it is installing Third Party Source (57%) in my environment.
This is my environment:
1. Solaris 10 x86 5/08
2. SunStudio12ml-solaris-x86-200709-pkg.tar
3. Installation method: single user, graphical user interface
4. Hardware: VMware Workstation 6.0.2, CPU 1.5G, memory 400M
I searched in SunStudio12ml-solaris-x86-200709-pkg.tar, and I could not find SPROrdbks package which belongs to Third Party Source component.
I suspect this is the root cause of my installation problem. I restart the installation, and I do not select to install Third Party Source component. But the installation process now hangs when it is installing Performance Library (56%). I don't what is the root cause :P
Can anyone help me?
Thank you very much!
Regards,
O2CabinHi,
You could find log in the /var/sadm/install/logs directory. Probably it helps you.
(for example: /var/sadm/install/logs/Sun_Studio_Ceres_software_install.B09161643)
Unfortunately the SunStudio12 installer could have problems with virtual environments.
The Sun Studio is distributed as tar.bz2 archive (for latest Express it is wrapped into sh script).
You could just unpack it. The only difference is that there no packages are created.
Could this helps you?
Also if you use OpenSolaris you could install Sun Studio from IPS.
Thank you -
B1DIEvent Service on Windows Server 2008 x64 - installation hanging
I'm trying to install the B1DIEvent Service on a Windows 2008 x64 Server but the installation is not completing. It does create the directories in the SAP folder but the installer hangs at roughly 95%.
It seems to not be able to register the service on the server.
Does anyone know if there would be compatability issues with Wondows 2008 Server x64? Or are there any speciffic steps that I can take to install this?
I have installed MSMQ on the server.
Any help would be appreaciated.
Best wishes
Edu van ZylHi Edu,
Did you followed the instructions compiled in the other threads showing how to recompile the dll???
Just follow step by step what is described there, it should work.
DI EVENT SERVICE ON 64 SERVER
1. Change compilation option to x64
2. You have to replace the following 2 lines modified marked with:
char msg[ 398 ]; // Old was mgs[378]
sock, msg, 398, 0, (const struct sockaddr*)&sAddr, sizeof(struct
sockaddr_in));
3. Replace the old dll by the new one compiled
4. Don't forget to register the dll (after compiling and copying in the right folder):
C:\WINDOWS\SysWOW64>regsvr32.exe "C:\Program Files (x86)\SAP\SAP Business
One DI Event Service\SAP Business One DI Event Server\SBO_SP_TransactionNotification\B1DIEventsSender.dll"
Both Ad and Andres succeeded to do it.
Hope it helps
Trinidad. -
Photoshop Elements 11 Installer hangs.
Photoshop Elements 11 Installer hangs at;
Status: Installing Elements 11 Organizer
Shortcut: ARPPRODUCTICON.exe
and will proceed no further........
Ran Adobe Support Advisor while it is hung and it just keeps running, Cancel install with task manager, run Adobe Support Advisor and nothing is found.
Trying to install on Laptop - MS Windows 7 Home Premium, 64-bit SP1, AMD Turion II Dual-Core Mobile M520, 4.0 GB Raam, ATI Mobility Radeon HD 4650 Series, 2.30 GhzHi Mesmoid,
Right click on setup and run as admin. If still the same issue then perform selective startup and try installing again: http://windows.microsoft.com/en-in/windows-vista/run-selective-startup-using-system-config uration .
Regards,
Romit Sinha
Maybe you are looking for
-
how do i fix my ipod's screen it looks lik black on white and i can barely c the screen.?!
-
My Hitachi external drive does not show up in my Dell Lapto Device Manager
I have a Dell external drive which is Hitachi Model 72323. I was happy with it until I used bit locker to add a password on it. After that it worked a couple of times then my computer will not recognize the drive again. It does not even show up in my
-
Access to non-apple system prefs
We are in a corporate environment. When setting up new Macs we turn off access to the System Preferences using the Accounts Control Panel. We want to prevent users from changing Network settings, Sharing options, etc. that we setup up for our company
-
How to Avoid wrong spell MD values at Qry selection
Hi all, The issue is at Query Selection: We set: Query def. Filter value selection = Only values in infoprovider Query Execution Filter Val. Selectn = Only values in InfoProvider I want to see only Info provider(TD) values not Master values @ Qry sel
-
Problem launching iTunes PLEASE HELP!!!
hi, this is my first time with an ipod and i haven't had difficulties until now. When ever i try to launch iTunes, there is an error and it says: iTunes cannot run because it has detected a promblem with your audio configuration. i tried to re-instal