Lion Kernel Panics - will an erase and install help?

Since upgrading to Lion and iCloud I have been experiencing kernel panics on my Macmini. I'm currently troubleshooting and believe I have concluded that the  my USB or Firewire attached drives (a WD My Book 2TB and a Drobo 2G respectively) are not the cause (because the kernal panics still happen when these are disconnected and not powered on). I am discounting that RAM is issue for now, because this hasn't changed since I bought the Mini in 2010.
So my investigations are focusing on software - I've already uninstalled several apps which I have read may cause issues (Logmein and WD RAID manager). I have also tried using Lion Cache Cleaner (LCC) but this in itself seems to be causing kernel panics, particulalry when using Clam AV to virus check the home and download directories. I've experienced 2 kernal panics using LCC (always at the Clam AV step) so I've given up on that.
I've tried looking at the panic logs but I can't interpret them, so I'm thinking my last option is to completely wipe my Mini hard drive and do a fresh install of Lion and rebuild my system from the ground up. Given the lack of success with my troubleshooting, and the fact that I installed Lion on top of Snow Leopard in the first instance, leads me to believe this is the safest option.
Is this the best approach or is there anything else I should try first? I have a clone and my data is backed up.

So out of the three issues I did the following:
com.DataRobotics.driver.iSCSIInitiator - I followed a procedure provided by Drobo support to completely erase and then reinstall the latest Lion Drobo Dashboard
com.Logitech.Control Centre.HID Driver - I ugraded to the latest Lion version
com.iospirit.driver.rbiokithelper - I couldn't actually find this in the location expected (~/Library/Preferences/) or anywhere else in my library for that matter. I think it was an app I must have deleted some time ago (Remote Buddy). So I downloaded the latest version of Remote Buddy for Lion, thinking that I could install and then unistall that to remove the driver. However, I did find the following kext which I removed (/System/Library/Extensions/RBIOKitHelper.kext)
I decided this was enough so I retested everything by running a complete TimeMachine backup. Unfortunately I got another kernel panic this morning. From the log below it looks like the Logitech driver has updated. The datarobitics (Drobo) driver looks the same but I'm assuming this is ok for now as I completely reinstalled it, so that leaves me with com.iospirit.driver.rbiokithelper as the culprit. I've just got to find the d*mn thing to delete it!! When I do I'll try a backup again, and failing that, erase and install Lion.
Obviously I can't really interpret the error log, but is there anything else which may be causing the issue?
Thu Nov  3 06:29:38 2011
panic(cpu 1 caller 0xffffff80002c266d): Kernel trap at 0xffffff800028fff0, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000040000028, CR3: 0x0000000022ab1000, CR4: 0x0000000000000660
RAX: 0x0000000000000001, RBX: 0x0000000000262000, RCX: 0xffffff800c9c0740, RDX: 0x000000000004e163
RSP: 0xffffff8078c63640, RBP: 0xffffff8078c63660, RSI: 0x00000000258f96a0, RDI: 0xffffff80042010b0
R8:  0xffffff800de3a858, R9:  0x0000000000000000, R10: 0xffffff8078c63eb8, R11: 0xffffff80002d8220
R12: 0xffffff80042010b0, R13: 0xffffff800cce9808, R14: 0xffffff8013c97720, R15: 0x0000000040000000
RFL: 0x0000000000010206, RIP: 0xffffff800028fff0, CS:  0x0000000000000008, SS:  0x0000000000000010
CR2: 0x0000000040000028, Error code: 0x0000000000000000, Faulting CPU: 0x1
Backtrace (CPU 1), Frame : Return Address
0xffffff8078c63300 : 0xffffff8000220702
0xffffff8078c63380 : 0xffffff80002c266d
0xffffff8078c63520 : 0xffffff80002d7a1d
0xffffff8078c63540 : 0xffffff800028fff0
0xffffff8078c63660 : 0xffffff800028bcb5
0xffffff8078c63970 : 0xffffff800056e62b
0xffffff8078c639b0 : 0xffffff80002ee08d
0xffffff8078c63b20 : 0xffffff80002eed4f
0xffffff8078c63d50 : 0xffffff80004eac99
0xffffff8078c63dc0 : 0xffffff8000318e4d
0xffffff8078c63e10 : 0xffffff800031066b
0xffffff8078c63e60 : 0xffffff8000561711
0xffffff8078c63ef0 : 0xffffff8000561cf7
0xffffff8078c63f50 : 0xffffff80005caa9b
0xffffff8078c63fb0 : 0xffffff80002d8363
BSD process name corresponding to current thread: backupd
Mac OS version:
11C74
Kernel version:
Darwin Kernel Version 11.2.0: Tue Aug  9 20:54:00 PDT 2011; root:xnu-1699.24.8~1/RELEASE_X86_64
Kernel UUID: 59275DFA-10C0-30B3-9E26-F7B5DFB1A432
System model name: Macmini3,1 (Mac-F22C86C8)
System uptime in nanoseconds: 9469092922359
last loaded kext at 1077524308432: com.apple.iokit.IOAVBFamily              1.0.0d22 (addr 0xffffff7f81003000, size 36864)
last unloaded kext at 131413126308: com.apple.driver.PioneerSuperDrive            3.0.1 (addr 0xffffff7f81bf9000, size 12288)
loaded kexts:
com.TrustedData.driver.VendorSpecificType00 1.4.0
com.iospirit.driver.rbiokithelper               1.8.0
com.DataRobotics.driver.iSCSIInitiator   1.4.33
com.Logitech.Control Center.HID Driver                3.5.0
com.apple.driver.AppleUSBCDC               4.1.15
com.apple.driver.AppleFireWireStorage               3.0.1
com.apple.driver.initioFWBridge              3.0.1
com.apple.driver.IOFireWireSerialBusProtocolSansPhysicalUnit 3.0.1
com.apple.driver.LSI_FW_500   3.0.1
com.apple.driver.Oxford_Semi 3.0.1
com.apple.driver.StorageLynx   3.0.1
com.apple.driver.AppleHWSensor           1.9.4d0
com.apple.filesystems.autofs    3.0
com.apple.driver.AudioAUUC    1.59
com.apple.driver.ApplePlatformEnabler               2.0.4d2
com.apple.driver.AGPM               100.12.42
com.apple.driver.AppleHDA       2.1.3f7
com.apple.driver.AppleUpstreamUserClient      3.5.9
com.apple.driver.AppleMCCSControl     1.0.26
com.apple.driver.ACPI_SMC_PlatformPlugin      4.7.5d4
com.apple.iokit.IOUserEthernet               1.0.0d1
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AudioIPCDriver             1.2.1
com.apple.GeForce        7.1.2
com.apple.driver.AppleLPC         1.5.3
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless      1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib                1.0.0d1
com.apple.BootCache   33
com.apple.iokit.SCSITaskUserClient        3.0.1
com.apple.iokit.IOAHCIBlockStorage      2.0.1
com.apple.driver.AirPortBrcm43224        500.36.11
com.apple.driver.AppleEFINVRAM          1.5.0
com.apple.driver.AppleFWOHCI               4.8.9
com.apple.driver.AppleUSBHub               4.5.0
com.apple.driver.AppleRTC        1.4
com.apple.driver.AppleAHCIPort             2.2.0
com.apple.driver.AppleUSBOHCI             4.4.5
com.apple.nvenet           2.0.17
com.apple.driver.AppleUSBEHCI              4.5.0
com.apple.driver.AppleHPET      1.6
com.apple.driver.AppleACPIButtons      1.4
com.apple.driver.AppleSMBIOS                1.7
com.apple.driver.AppleACPIEC 1.4
com.apple.driver.AppleAPIC      1.5
com.apple.driver.AppleIntelCPUPowerManagementClient         167.0.0
com.apple.nke.applicationfirewall           3.2.30
com.apple.security.quarantine  1
com.apple.driver.AppleIntelCPUPowerManagement     167.0.0
com.apple.iokit.IOAVBFamily     1.0.0d22
com.apple.iokit.IOEthernetAVBController            1.0.0d5
com.apple.iokit.IOUSBMassStorageClass              3.0.0
com.apple.iokit.IOSCSIBlockCommandsDevice   3.0.1
com.apple.iokit.IOFireWireSerialBusProtocolTransport  2.1.0
com.apple.iokit.IOFireWireSBP2               4.2.0
com.apple.kext.triggers                1.0
com.apple.driver.AppleHIDKeyboard     152.3
com.apple.driver.IOBluetoothHIDDriver               4.0.1f4
com.apple.driver.DspFuncLib     2.1.3f7
com.apple.driver.IOPlatformPluginFamily            4.7.5d4
com.apple.iokit.IOSurface           80.0
com.apple.iokit.IOBluetoothSerialManager         4.0.1f4
com.apple.iokit.IOSerialFamily   10.0.5
com.apple.iokit.IOSCSIParallelFamily      2.5.1
com.apple.driver.AppleSMC       3.1.1d8
com.apple.iokit.IOAudioFamily  1.8.3fc11
com.apple.kext.OSvKernDSPLib                1.3
com.apple.driver.ApplePolicyControl     3.0.16
com.apple.driver.AppleGraphicsControl               3.0.16
com.apple.iokit.IOFireWireIP     2.2.4
com.apple.driver.AppleHDAController   2.1.3f7
com.apple.iokit.IOHDAFamily     2.1.3f7
com.apple.nvidia.nv50hal            7.1.2
com.apple.NVDAResman             7.1.2
com.apple.iokit.IONDRVSupport              2.3.2
com.apple.iokit.IOGraphicsFamily            2.3.2
com.apple.driver.BroadcomUSBBluetoothHCIController               4.0.1f4
com.apple.driver.AppleUSBBluetoothHCIController        4.0.1f4
com.apple.iokit.IOBluetoothFamily         4.0.1f4
com.apple.iokit.IOUSBHIDDriver               4.4.5
com.apple.driver.AppleUSBComposite  3.9.0
com.apple.iokit.IOSCSIMultimediaCommandsDevice      3.0.1
com.apple.iokit.IOBDStorageFamily        1.6
com.apple.iokit.IODVDStorageFamily     1.7
com.apple.iokit.IOCDStorageFamily        1.7
com.apple.iokit.IOAHCISerialATAPI         2.0.1
com.apple.iokit.IOSCSIArchitectureModelFamily              3.0.1
com.apple.driver.XsanFilter        403
com.apple.iokit.IO80211Family  411.1
com.apple.iokit.IOFireWireFamily            4.4.5
com.apple.iokit.IOUSBUserClient             4.5.3
com.apple.driver.AppleEFIRuntime         1.5.0
com.apple.iokit.IOAHCIFamily    2.0.7
com.apple.iokit.IONetworkingFamily      2.0
com.apple.driver.NVSMU            2.2.9
com.apple.iokit.IOUSBFamily     4.5.3
com.apple.iokit.IOHIDFamily      1.7.1
com.apple.iokit.IOSMBusFamily                1.1
com.apple.security.sandbox       165.3
com.apple.kext.AppleMatch      1.0.0d1
com.apple.security.TMSafetyNet             7
com.apple.driver.DiskImages     331
com.apple.iokit.IOStorageFamily              1.7
com.apple.driver.AppleKeyStore             28.18
com.apple.driver.AppleACPIPlatform     1.4
com.apple.iokit.IOPCIFamily       2.6.7
com.apple.iokit.IOACPIFamily    1.4

Similar Messages

  • Will an archive and install help me?

    Since installing a new hard drive on my first gen macbook last year, and especially since installing Snow Leopard last summer, I have been plagued by beach balls and freezes and even the occasional kernel panic (OK, only one of those). Sometimes my computer works fine for several days or a week; sometimes, like today, it freezes three or more times. I've done everything I can think of - tech tool pro says the hardware is OK, as does disk utility on the Snow Leopard disk, PRAM and SMC have been reset time and again, I repair permissions nearly every day. Is there any reason to believe an archive and install might help me? Any other ideas?

    dobes918 wrote:
    Is there any reason to believe an archive and install might help me?
    no, but there is no reason either to believe that with SL there's something like an "archive & install". it's either erase & install or an upgrade install.
    after backing up my precious data, i would opt for the former.

  • How can I reformat my hard drive if erase and partition don't work in disk utility and I get an error when I try to erase and install from the Leopard install disk?  I have had several kernel panics, but the volume shows up in startup disk.

    I have had several kernel panics on my iBook G4; the panic message shows up just after the desktop appears. Although the startup volume shows up in Startup Disk, the installation disk reports an error when I attempt an erase and install. Disk utility is unable either to erase or partition the hard drive. The hard drive shows up in disk utility, but the startup volume doesn’t  HELP!!!

    Do you have the original system discs that came with the iBook when it was new?
    Which exact iBook model is it?
    You can choose from this list:
    http://www.everymac.com/systems/apple/ibook/index-ibook.html
    Erasing the disc and installing Mac OS X 10.5 will result in loss of the other applications (such as the iLife applications) which came pre-installed on the iBook.

  • If I erase and install Lion, will my exisiting Time Machine Back-up be overwritten?

    Since upgrading to Lion, I have experienced problems with permissions and having to repair the disk.
    I have decided to do an erase and install of Lion, but would like to clarify a few things about the time machine back up.
    Firstly, once the operating system has been re-installed (I do not intend to restore from backup), will my current time machine back up continue to operate or will a new back up need to take its place?
    Secondly, rather than restoring from the back up (as I have alot of redundant apps), am I able to select certain apps/app data to restore?  (If the answer to the above is 'Yes' then i assume that this could be done by entering time machine once I am up and running).
    Thanks

    First, it's unlikely that reinstalling Lion will solve your problems. But that's not the question.
    If you do erase and restore, you won't lose your TM backups, but TM will need to back up all your files, even if they were previously backed up. That may result in the deletion of many snapshots to free up space.

  • Kernel panic: Snow Leopard erase & install

    Continuous kernel panics when trying to erase and install Snow Leopard on my Mini. I tried it via disk and also a flash drive, but both ways end with kernel panic. Any ideas how to get past this?

    I can only tell you what I would infer from what you have reported which is a kernel panic when booting from an installer disc. This being the case then the computer is not functioning fine. Hardware can fail at any time. When it does then, yes, one moment it's working then the next moment it's not.
    If you've reported information that isn't correct or stated it in a way that's easy to misinterpret, then please expand on the situation. Are your installers good - do they work on another computer? Do the installers have a version of OS X that's compatible with the computer? For example, if the computer came with 10.6.3 installed when it was new, then you cannot boot it with a previous version of OS X.

  • HT1544 If I choose erase and install, will my i-tunes library be erased?

    Im running OSX 10.4.11 im upgrading to snow leopard, 10.6...from a "new" disc I bought used.If I choose to erase and install, am I going to lose my i-tunes music? I do want to erase the current administrator account and password, as I got my computer used without and discs or passwordes. my reason for going to snow leopard is to be able to download the current version of i-tunes. My 10.4.11 only allows me to go up to i-tunes 9.So i cant synch touch devices, ect. Also, i want to be the administrator with my own password. Will this work?

    Yes, Erase will do exactly what it says... erase everything.
    Just do an Install without erasing, but first...
    Reset OS X Password Without an OS X CD...
    http://theappleblog.com/2008/06/22/reset-os-x-password-without-an-os-x-cd/
    Admin Hack...
    http://www.hackmac.org/?q=node/4
    Starts up like the first time you buy a new Mac, but after filling in all that info again, you should have access to the computer and the other Users & files will still be there... give the new User a different name than an existing one.

  • Mail will not recognize mailboxes backed up before erase and install.

    Since my computer was starting to slow down, I figured it was a good time for the old erase and install. Rather than backup the whole "Mail" folder in the library as I should have done, I only backed up the "Mailboxes" and the "POP-address@..." folders. I also backed up the plist folder to go in /preferences/mail.
    Now mail won't recognize my old mailboxes. The preferences list clearly worked, and my mailbox folders even appear on the left in mail, but none of my messages are there. When I try to use the "import mailboxes" command in mail, it says that "No valid mail for mac os x were found." The messages are clearly in these folders because if I double click on an individual message, I can see it.
    Please help me to get back to my former world. I miss IMAP.

    David Gimeno Gost wrote:
    I also backed up the plist folder to go in /preferences/mail.
    This doesn’t make sense. com.apple.mail.plist, if that’s what you mean, is a file, not a folder, and it should be in ~/Library/Preferences/, not in “/preferences/mail”.
    When I try to use the "import mailboxes" command in mail, it
    says that "No valid mail for mac os x were found."
    Pay attention to the instructions that Mail displays when choosing Mail for Mac OS X as the data format. In the next step, Mail wants you to select the folder that contains the mailboxes to be imported (i.e. the folder where the .mbox folders to be imported reside), not the .mbox folders themselves nor the Messages folders within them. If you select the wrong folder, Mail says “No valid Mail for Mac OS X files were found” because it cannot find any .mbox folders within the folder you’re selecting.
    Yes, sorry, the file is in library/preferences.
    Your suggestion about paying attention to the folder that the mailboxes are IN worked like a charm. The only problem is that now I accidentally deleted my trash mailbox and can't figure out how to create a new one.
    Thank you so much for your help, and I apologize for my ineptitude.

  • IMac still broken after 10.5.7 problems and Erase and Install

    I had written the following at the end of a "solved" post when it was suggested that I start a new post instead. So here is what I had...
    Ok. I think my iMac was turned into a giant paper weight by 10.5.7.
    Here's what happened with the Archive and Install. The screen said "Calculating Time Remaining" and stayed there for over an hour. I searched the boards and found that I should try to create a partition with Disk Utility and then try again.
    So, I hard reset the computer and reboot off the Leopard DVD. I tried to make the partition but couldn't figure out how. Turns out I needed to click on the actual hard drive icon, not the existing Volume icon (which I discovered later). So, I checked the drive for repairs and it still checked out ok. I decided to erase the drive and go from there.
    While tinkering in the Utilities I noticed the Restore from Backup option. So, I plugged in my Firewire Time Machine drive and began a restore from the last time my System was using 10.5.6. The restore completed successfully and I was hopeful that things would be ok.
    I restarted the machine and it immediately went in to Open Firmware and the fans start spinning at full. So, I shake my head and decide to reset NVRAM. It tries to reboot and I have to hard restart it 3 or 4 times (as usual lately) and was able to reboot again off the Leopard install DVD.
    That's it, I thought. I'm going to erase and install OS X.
    I go back to Disk Utility and figure out how to partition the drive. I create a single partition and begin the process of Install OS X. It says starts fine and in about 40 minutes it is complete.
    Restart with fingers crossed! New OS, wiped drive... it HAS to work, right?
    Nope.
    Same problems... freezing on boot, fans loud, etc. I reset PRAM and SMU(SMC).
    Luckily I don't have any pressing work on my computer - someone who did would be quite angry with Apple that this was happening.
    For my part... I now have a wiped hard drive... all iTunes content, iPhoto content, all my apps, games, docs... GONE. I do have the Time Machine backup... but did it really have to come to this? I suppose my hard drive could be failing... but wouldn't the multiple disk checks have shown something?
    If there are any suggestions I'm all ears. I have reached the limits of my troubleshooting knowledge.
    Thanks,
    Jon
    Follow-up:
    After the computer had been off for several hours over night I decided to start it up again to see what would happen. At first it looked encouraging... got the startup chime, the Apple logo, the progress wheel.... then kernel panic.
    Several hard restarts later (to get the Leopard DVD out of the drive) and the iMac now sits, packed in it's original box, ready to go to the Apple Store.
    My question is this... does anyone think this might be a power supply issue?
    The reason I ask is that I exhausted ALL troubleshooting procedures that I can think of. These include:
    Replacing RAM, both DIMMs
    Reset PRAM and NVRAM and SMC
    Check hard drive using install DVD - OK
    Restore 10.5.6 from Time Machine drive - did not resolve issues
    Erase and Install OS X - did not resolve issue
    Plug iMac in to wall outlet versus power strip
    Removed all peripherals
    etc, etc
    I just can't believe that upgrading to 10.5.7 would hose my hardware. The iMac was working fine until 10.5.7 except the occasional crash of Halo on the larger maps.
    Totally stumped.
    Thanks,
    Jon

    Hello Joanne:
    A suggestion - reset the SMU:
    http://support.apple.com/kb/HT1767
    If that does not help, let me try to answer your questions.
    Wondering if I should roll back to 10.5.4 which is what I had, and, if so, how to do it?
    If you have Time Machine, use that (a copy before the problem). If you do not have TM (or a bootable clone) the way to go back is to do an archive and install:
    http://support.apple.com/kb/HT1710
    Also, I've downloaded the Safari update, which I know won't run on that, so would I even be able to get the old Safari back?
    The archive and install will do that. By the by, Safari 4 should run just fine on your system. It is faster than Safari 3.
    Barry

  • Startup problems, even after erase and install

    Hi, i have a polycarbonate black macbook (I think its of the last black ones that were sold), I used to have leopard 10.5.8, and windows xp on it with refit as the boot menu, recently I removed refit, and updated to snow leopard, around that time i started having problems at boot time, either i got stuck at the grey apple screen, or got a prohibitory sign, or most commonly, a kernel panic, that leaves no log by the way. About 1 in 5 tries actually boots up, so I thought I should go the windows way and erase and install. And the problem is still there, I ran a memtest from single user mode, and all ram ended ok.
    I have since reinstalled rEFIt, and the problem at least changed, when I turn on the mac, at least the rEFIt logo comes up, sometimes it does load fine, and after that if i choose mac os its exactly as before, if I choose legacy os I get the no boot disk found error (which is what i expect since the computer only has mac os x)
    As an aditional note, when the computer does boot, everything works completely normal, the only problems are at boot up time.
    EDIT: Just to add that I cant seem to run Apple hardware test, it just doesnt boot holding the D key from either install disk, not before having installed refit, nor after
    Hope someone can find some insight in this, im really worried that this could be some logic board failing, I really cant afford such an expense. Thanks, and sorry for the long post, I wanted to detail it as much as possible
    Message was edited by: carlosjoan91

    If your hardware test boot device was on the hard drive rather than the installer disc, then installing rEFIt may destroy the boot loader originally used causing the loss of an ability to boot into the test. You would likely need an old version of the installer disc that had the hardware test on the disc rather than on the hard drive.
    At this point the best thing for you to do is the following:
    Extended Hard Drive Preparation
    1. Boot from your OS X Installer Disc.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    Reinstall OS X and use Boot Camp Assistant to create a Windows volume instead of using rEFIt. You'll have fewer problems.

  • Kernel Panics! Even on clean install!!

    Can anyone help me here? I've always been plagued by kernel panics since I've had this machine, and assumed it was caused by bad software/drivers. But now I've done a clean erase and install of both 10.3.9 and 10.4, I'm STILL getting kernel panics.. no other hardware is being used and no softwarte installed at all.. computer passess hardware checks and disk had permissions repaired.. here are the logs, for anyone who can read them Thanks for any help you might give!
    Wed Sep 27 07:20:12 2006
    panic(cpu 0): Uncorrectable machine check: pc = 000000009025B5A8, msr = 000000004000F030, dsisr = 42000000, dar = 00000000056D6000
    AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
    L2FIR = 0000000000000000, BusFir = 0000000000000000
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00083498 0x0008397C 0x0001EDA4 0x0009160C 0x00090D78 0x0009402C
    Proceeding back via exception chain:
    Exception state (sv=0x1FF7FA00)
    PC=0x9025B5A8; MSR=0x4000F030; DAR=0x056D6000; DSISR=0x42000000; LR=0x901C2258; R1=0xBFFFEE90; XCP=0x00000008 (0x200 - Machine check)
    Kernel version:
    Darwin Kernel Version 7.9.0:
    Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
    Wed Sep 27 11:52:06 2006
    panic(cpu 0): Uncorrectable machine check: pc = 00000000000035A4, msr = 0000000042003000, dsisr = 42000000, dar = 0000000019A73000
    AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
    L2FIR = 0000000000000000, BusFir = 0000000080000000
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00083498 0x0008397C 0x0001EDA4 0x0009160C 0x000908F8 0x0009402C
    Proceeding back via exception chain:
    Exception state (sv=0x264C4000)
    PC=0x000035A4; MSR=0x42003000; DAR=0x19A73000; DSISR=0x42000000; LR=0x000033F4; R1=0xBFFFE1B0; XCP=0x00000008 (0x200 - Machine check)
    Backtrace:
    backtrace terminated - frame not mapped or invalid: 0xBFFFE1B0
    Kernel version:
    Darwin Kernel Version 7.9.0:
    Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
    titanium 1Ghz   Mac OS X (10.3.9)  

    Welcome to Apple Discussions!
    It appears your inquiry has already been answered here:
    http://discussions.apple.com/message.jspa?messageID=3216392#3216392
    Please don't crosspost unless asked to.
    I will add more suggestions on that thread.

  • Backing up before and erase and install of 10.5, viable strategy?

    I have been having some stability/start-up problems lately on my powerbook G4 (wouldn't boot after downloading and installing latest update to OS10.5, took it to apple store they ran some tests, said it didn't appear to be a hardware issue and they did an archive and install and it allowed me to boot the machine again but have experienced kernel panic when restarting since then) and was considering an erase and install of OS 10.5 (currently running 10.5 but bought the machine with 10.3, updated to 10.4 a few years back, and updated to 10.5 this past holiday season so I figure it could use a fresh start).
    Up until this point I haven't had a backup strategy in place but the threat of losing by music / picture collection and other important documents has inspired me to get an external drive to back up my data. I was planning on using this drive to make a bootable copy of my current internal drive using superduper and using that with migration assistant to restore my apps, preferences, settings, and files after I have done an erase and install on the internal HD and had a few questions:
    1. Will this work?
    2. Is it a good idea given the problems i have described?
    3. Can migration assistant copy over non-OSX apps such as my iLife programs, MS Office, MATLAB?
    4. Would using Time Machine be a better option?
    Any input would be greatly appreciated.
    Tim

    Thanks all, sounds like this might should work, just want to make sure I don't have to manually reinstall MS office as I no longer have the disk or keys. As there some piece of info that I should write down that would allow me to reinstall MS office without purchasing a new license?
    MS Office should work after an import from Migration Assistant. Of course, if it doesn't you could always:
    1) Talk with Microsoft. If you registered your purchase, they can reissue the keys, or
    2) Use OpenOffice or NeoOffice (free office suites that are quite compatible and functional), or
    3) Use iWork (the Apple office suite that is great for presentations and documents and "ok" for spreadsheets).
    Cheers,
    Rodney

  • Cant erase and install cleanly. some type of hijack itseems.

    m trying to erase and install cleanly. i know the procedure, done it many times due to the fact some very malicious and tech savvy individual has a beef with me for some reason. the attacks are worse and worse. its debilitating actually. not a game anymore. i was able to save a piece of all messages log during install. much different than previous install logs. the system works although i have very limited authority. and oddities re: preference panes,( its shows it as locked yet i ca change security setting even in std user account. only some terminal commands are operable even under sudo. (error message"command not found") e.g.: env, open, history, rm, ls -A, etc..... no function.
    PLEASE NOTE : I UNDERSTAND THE SEVERITY OF THIS AND REALIZE THERE MAY NOT BE ANY RESPONSES OR RESOLUTIONS. IN ANY CASE THANKS A MILLION FOR YOUR TIME.
    SORRY BOUT THE LENGTH....ALLMESSAGESLOG:
    4/20/09 1:20:37 PM com.apple.launchctl.System[2] BootCacheControl: could not open /var/db/BootCache.playlist:
    4/20/09 1:20:37 PM com.apple.launchctl.System[2] No such file or directory
    4/20/09 1:20:38 PM com.apple.launchctl.System[2] launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
    4/20/09 1:20:38 PM com.apple.launchd[1] (org.cups.cupsd) Unknown key: SHAuthorizationRight
    4/20/09 1:20:38 PM com.apple.launchd[1] (org.ntp.ntpd) Unknown key: SHAuthorizationRight
    4/20/09 1:20:39 PM kernel npvhash=4095
    4/20/09 1:20:39 PM kextd[10] 394 cached, 0 uncached personalities to catalog
    4/20/09 1:20:39 PM kernel hi mem tramps at 0xffe00000
    4/20/09 1:20:39 PM kernel PAE enabled
    4/20/09 1:20:39 PM kernel 64 bit mode enabled
    4/20/09 1:20:39 PM kernel Darwin Kernel Version 9.0.0: Thu Oct 11 19:23:39 PDT 2007; root:xnu-1228~3/RELEASE_I386
    4/20/09 1:20:39 PM kernel standard timeslicing quantum is 10000 us
    4/20/09 1:20:39 PM kernel vmpagebootstrap: 973843 free pages and 74733 wired pages
    4/20/09 1:20:39 PM kernel migtable_maxdispl = 79
    4/20/09 1:20:39 PM kernel Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    4/20/09 1:20:39 PM kernel Extension "com.apple.driver.AppleIntelCPUPowerManagement" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    4/20/09 1:20:39 PM kernel devfsmakenode: not ready for devices!
    4/20/09 1:20:39 PM kernel AppleACPICPU: ProcessorApicId=0 LocalApicId=0 Enabled
    4/20/09 1:20:39 PM kernel AppleACPICPU: ProcessorApicId=1 LocalApicId=1 Enabled
    4/20/09 1:20:39 PM kernel Loading security extension com.apple.nke.applicationfirewall
    4/20/09 1:20:39 PM kernel Loading security extension com.apple.security.TMSafetyNet
    4/20/09 1:20:39 PM kernel calling mpopolicyinit for TMSafetyNet
    4/20/09 1:20:39 PM kernel Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    4/20/09 1:20:39 PM kernel Loading security extension com.apple.security.seatbelt
    4/20/09 1:20:39 PM kernel calling mpopolicyinit for mb
    4/20/09 1:20:39 PM kernel Seatbelt MACF policy initialized
    4/20/09 1:20:39 PM kernel Security policy loaded: Seatbelt Policy (mb)
    4/20/09 1:20:39 PM kernel Copyright (c) 1982, 1986, 1989, 1991, 1993
    4/20/09 1:20:39 PM kernel The Regents of the University of California. All rights reserved.
    4/20/09 1:20:39 PM kernel MAC Framework successfully initialized
    4/20/09 1:20:39 PM kernel using 16384 buffer headers and 4096 cluster IO buffer headers
    4/20/09 1:20:39 PM kernel IOAPIC: Version 0x20 Vectors 64:87
    4/20/09 1:20:39 PM kernel Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    4/20/09 1:20:39 PM kernel ACPI: System State [S0 S3 S4 S5] (S3)
    4/20/09 1:20:39 PM kernel Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    4/20/09 1:20:39 PM kernel Extension "com.apple.driver.AppleACPIPlatform" has immediate dependencies on both com.apple.kernel and com.apple.kpi components; use only one style.
    4/20/09 1:20:39 PM kernel mbinit: done
    4/20/09 1:20:39 PM kernel Security auditing service present
    4/20/09 1:20:39 PM kernel BSM auditing present
    4/20/09 1:20:39 PM kernel rooting via boot-uuid from /chosen: 1E76D942-E07B-3808-B155-B129A649A793
    4/20/09 1:20:39 PM kernel Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
    4/20/09 1:20:39 PM kernel FireWire (OHCI) TI ID 8025 built-in now active, GUID 001e52fffe48209e; max speed s800.
    4/20/09 1:20:39 PM kernel Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0@0 /IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDrive r/ST9500325AS Media/IOGUIDPartitionScheme/Untitled@2
    4/20/09 1:20:39 PM kernel BSD root: disk0s2, major 14, minor 2
    4/20/09 1:20:39 PM kernel HFS: created HFBT on untilted
    4/20/09 1:20:39 PM kernel Jettisoning kernel linker.
    4/20/09 1:20:39 PM kernel Resetting IOCatalogue.
    4/20/09 1:20:39 PM kernel GFX0: family specific matching fails
    4/20/09 1:20:39 PM kernel Matching service count = 1
    4/20/09 1:20:39 PM kernel Matching service count = 2
    4/20/09 1:20:39 PM kernel Matching service count = 2
    4/20/09 1:20:39 PM kernel Matching service count = 2
    4/20/09 1:20:39 PM kernel Matching service count = 2
    4/20/09 1:20:39 PM kernel Matching service count = 2
    4/20/09 1:20:41 PM kernel ath_attach: devid 0x24
    4/20/09 1:20:42 PM kernel Override HT40 CTL Powers. EEPROM Version is 14.4, Device Type 5
    4/20/09 1:20:42 PM kernel NVDANV50HAL loaded and registered.
    4/20/09 1:20:42 PM kernel GFX0: family specific matching fails
    4/20/09 1:20:42 PM kernel CSRHIDTransitionDriver::start []
    4/20/09 1:20:42 PM kernel GFX0: family specific matching fails
    4/20/09 1:20:42 PM kernel athdescdmasetup: tx dddescpaddr = 0x165a3000, length 0x46500(288000) bytes
    4/20/09 1:20:42 PM kernel athdescdmasetup: beacon dddescpaddr = 0x1507a000, length 0x90(144) bytes
    4/20/09 1:20:42 PM kernel mac 12.10 phy 8.1 radio 12.0
    4/20/09 1:20:43 PM kernel CSRHIDTransitionDriver::switchToHCIMode legacy
    4/20/09 1:20:43 PM kernel USBF: 9.152 CSRHIDTransitionDriver[0x6ddda00](IOUSBCompositeDevice) GetFullConfigDescriptor(0) returned NULL
    4/20/09 1:20:43 PM kernel CSRHIDTransitionDriver... done
    4/20/09 1:20:44 PM bootlog[60] BOOT_TIME: 1240258834 0
    4/20/09 1:20:44 PM fseventsd[51] log dir: /.fseventsd getting new uuid: 1C2B66FB-7F36-44AC-82E6-865CFF20B0A8
    4/20/09 1:20:44 PM rpc.statd[42] statd.notify - no notifications needed
    4/20/09 1:20:45 PM kernel E:[AppleUSBBluetoothHCIController][FindInterfaces] mInt0InterruptMaxPacketSize = 16
    4/20/09 1:20:46 PM DirectoryService[55] Launched version 5.0 (v514)
    4/20/09 1:20:48 PM kernel yukon: Ethernet address 00:1b:63:bd:6c:4c
    4/20/09 1:20:48 PM kernel AirPort_Athr5424ab: Ethernet address 00:1e:52:73:57:e4
    4/20/09 1:20:48 PM /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[47] Login Window Application Started
    4/20/09 1:20:50 PM /System/Library/CoreServices/coreservicesd[72] SFLSharePointsEntry::InitializeSPNode: dsOpenRecord returned -14136
    4/20/09 1:20:50 PM mDNSResponder mDNSResponder-162 (Oct 15 2007 16:31:59)[46] starting
    4/20/09 1:20:50 PM configd[58] New network configuration saved
    4/20/09 1:20:51 PM airportd[86] Launching AirPort updateprefs
    4/20/09 1:20:51 PM com.apple.SecurityServer[43] Entering service
    4/20/09 1:20:51 PM Apple80211 updateprefs[87] updateprefs launchd..
    4/20/09 1:20:51 PM Apple80211 updateprefs[87] Changing version to 6 (6)
    4/20/09 1:20:52 PM airportd[86] Error: ACInterfaceGetPowerPreference() failed
    4/20/09 1:20:52 PM /usr/sbin/ocspd[92] starting
    4/20/09 1:20:53 PM kextd[10] writing kernel link data to /var/run/mach.sym
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] ...Generating key pair...
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] ...creating certificate...
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Serial Number : 3F EF 8A D8
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Issuer Name :
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Common Name : com.apple.systemdefault
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Org : System Identity
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Subject Name :
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Common Name : com.apple.systemdefault
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Org : System Identity
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Cert Sig Algorithm : OID : < 06 09 2A 86 48 86 F7 0D 01 01 05 >
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] alg params : 05 00
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Not Before : 20:20:53 Apr 20, 2009
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Not After : 20:20:53 Apr 15, 2029
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Pub Key Algorithm : OID : < 06 09 2A 86 48 86 F7 0D 01 01 01 >
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] alg params : 05 00
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Pub key Bytes : Length 140 bytes : 30 81 89 02 81 81 00 BD ...
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] CSSM Key :
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Algorithm : RSA
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Key Size : 1024 bits
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Key Use : CSSMKEYUSEENCRYPT CSSMKEYUSEVERIFY CSSMKEYUSEWRAP
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Signature : 128 bytes : 37 79 EA DB 34 6B A9 7D ...
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Other field: : OID : < 06 0C 60 86 48 01 86 F8 4D 02 01 01 01 17 >
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Other field: : OID : < 06 0C 60 86 48 01 86 F8 4D 02 01 01 01 16 >
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Extension struct : OID : < 06 03 55 1D 25 >
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] Critical : FALSE
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] purpose 0 : OID : < 06 09 2A 86 48 86 F7 63 64 04 04 >
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] ..cert stored in Keychain.
    4/20/09 1:20:53 PM com.apple.configureLocalKDC[57] ..identity registered for domain com.apple.systemdefault.
    4/20/09 1:20:55 PM kernel E:[AppleUSBBluetoothHCIController][StartInterruptPipeRead] there is alredy a pending read, skipping.
    4/20/09 1:20:55 PM kernel [InterruptReadHandler] Received kIODeviceNotResponding error - retrying: 1.
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] ...Generating key pair...
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] ...creating certificate...
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Serial Number : 54 E2 19 7F
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Issuer Name :
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Common Name : com.apple.kerberos.kdc
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Org : System Identity
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Subject Name :
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Common Name : com.apple.kerberos.kdc
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Org : System Identity
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Cert Sig Algorithm : OID : < 06 09 2A 86 48 86 F7 0D 01 01 05 >
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] alg params : 05 00
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Not Before : 20:20:56 Apr 20, 2009
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Not After : 20:20:56 Apr 15, 2029
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Pub Key Algorithm : OID : < 06 09 2A 86 48 86 F7 0D 01 01 01 >
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] alg params : 05 00
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Pub key Bytes : Length 140 bytes : 30 81 89 02 81 81 00 D1 ...
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] CSSM Key :
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Algorithm : RSA
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Key Size : 1024 bits
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Key Use : CSSMKEYUSEENCRYPT CSSMKEYUSEVERIFY CSSMKEYUSEWRAP
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Signature : 128 bytes : 8F EF 0E C8 B8 76 3B A5 ...
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Other field: : OID : < 06 0C 60 86 48 01 86 F8 4D 02 01 01 01 17 >
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Other field: : OID : < 06 0C 60 86 48 01 86 F8 4D 02 01 01 01 16 >
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Extension struct : OID : < 06 03 55 1D 25 >
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] Critical : FALSE
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] purpose 0 : OID : < 06 09 2A 86 48 86 F7 63 64 04 04 >
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] ..cert stored in Keychain.
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] ..identity registered for domain com.apple.kerberos.kdc.
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] launchctl: Error unloading: com.apple.kdcmond
    4/20/09 1:20:56 PM com.apple.configureLocalKDC[57] /usr/sbin/kadmin.local-q add_principal -randkey afpserver/LKDC:SHA1.C508249D73E93D92C34AA2DE76F825F0D9B3D83C@LKDC:SHA1.C508249D 73E93D92C34AA2DE76F825F0D9B3D83C
    4/20/09 1:20:57 PM com.apple.configureLocalKDC[57] WARNING: no policy specified for afpserver/LKDC:SHA1.C508249D73E93D92C34AA2DE76F825F0D9B3D83C@LKDC:SHA1.C508249D 73E93D92C34AA2DE76F825F0D9B3D83C; defaulting to no policy
    4/20/09 1:20:57 PM com.apple.configureLocalKDC[57] Authenticating as principal root/admin@LKDC:SHA1.C508249D73E93D92C34AA2DE76F825F0D9B3D83C with password.
    4/20/09 1:20:57 PM com.apple.configureLocalKDC[57] Principal "afpserver/LKDC:SHA1.C508249D73E93D92C34AA2DE76F825F0D9B3D83C@LKDC:SHA1.C508249 D73E93D92C34AA2DE76F825F0D9B3D83C" created.
    4/20/09 1:20:57 PM com.apple.configureLocalKDC[57] /usr/sbin/kadmin.local-q ktadd afpserver/LKDC:SHA1.C508249D73E93D92C34AA2DE76F825F0D9B3D83C@LKDC:SHA1.C508249D 73E93D92C34AA2DE76F825F0D9B3D83C
    4/20/09 1:20:57 PM com.apple.configureLocalKDC[57] Authenticating as principal root/admin@LKDC:SHA1.C508249D73E93D92C34AA2DE76F825F0D9B3D83C with password.
    4/20/09 1:20:57 PM com.apple.configureLocalKDC[57] Entry for principal afpserver/LKDC:SHA1.C508249D73E93D92C34AA2DE76F825F0D9B3D83C@LKDC:SHA1.C508249D 73E93D92C34AA2DE76F825F0D9B3D83C with kvno 3, encryption type Triple DES cbc mode with HMAC/sha1 added to keytab WRFILE:/etc/krb5.keytab.
    4/20/09 1:20:57 PM
    log disappeared soon after

    thanx. i took your advice, and though the passwords were different the account with apple and mobile me and email and such were the same. so i started with a new hd and took it to apple and they installed os x and all the updates THEN i made a completely new id ,address, passwords and thought how simply brilliant that was. unfortunately i need a little more advice if you could be so kind.
    so i got this person messing with me. i know this because he/she is taunting me with emails sent from "me" with subject "you looked at me today" and "i am going to bad today" and other personal messages one could only get from reading my mail.
    but i dont want to pester you with trivial matters. i have been researching what is happening and i have a ypbind that i cant seem to unbind. at least not as admin using the GUI in directory utility. i can unlock the active directory and change some of the options but the ones that matter remain grey. and the ones i do change return to their original value by the next time i open it. the directory server help apple provides is pretty thorough but the procedures just arent jiving with the machine. is there a way to unbind or delete these automatic connections for good with the command line. i disabled the root user immediately following the fresh install so that is still intact but im afraid to open it with the password. perhaps with the sudo kill?
    * ACTIVITY MONITOR ALL PROCESSES *
    Active Memory: 755.22 MB
    Free Memory: 2.76 GB
    Wired Memory: 438.53 MB
    Used Memory: 1.24 GB
    Inactive Memory: 71.50 MB
    Total VM: 38.07 GB
    Number of processes: 58
    ID Process Name User CPU RSIZE VSIZE
    0 kernel_task root 3.5 74.77 MB 1.74 GB
    1 launchd root 0.0 556.00 KB 586.74 MB
    10 kextd root 0.0 1.28 MB 586.19 MB
    11 notifyd root 0.0 476.00 KB 586.17 MB
    12 syslogd root 0.0 460.00 KB 587.24 MB
    14 ntpd root 0.0 864.00 KB 586.12 MB
    15 usbmuxd _usbmuxd 0.0 944.00 KB 587.46 MB
    16 update root 0.0 288.00 KB 585.57 MB
    17 SystemStarter root 0.0 680.00 KB 585.61 MB
    20 securityd root 0.0 2.16 MB 587.43 MB
    23 mds root 0.0 13.52 MB 64.70 MB
    24 mDNSResponder _mdnsrespo 0.0 1.21 MB 587.49 MB
    25 loginwindow ianmac 0.0 5.92 MB 787.90 MB
    26 KernelEventAgent root 0.0 652.00 KB 585.68 MB
    28 hidd root 0.0 600.00 KB 586.12 MB
    29 fseventsd root 0.0 1.38 MB 592.71 MB
    31 dynamic_pager root 0.0 608.00 KB 585.61 MB
    33 diskarbitrationd root 0.0 1,016.00 KB 585.69 MB
    34 DirectoryService root 0.0 3.93 MB 21.80 MB
    36 configd root 0.0 1.89 MB 587.20 MB
    39 autofsd root 0.0 672.00 KB 585.62 MB
    41 socketfilterfw root 0.0 2.29 MB 585.93 MB
    44 distnoted daemon 0.0 792.00 KB 585.59 MB
    45 portmap daemon 0.0 360.00 KB 585.62 MB
    46 coreservicesd root 0.0 16.61 MB 38.91 MB
    49 blued root 0.0 1.96 MB 596.99 MB
    55 WindowServer _windowser 16.6 68.21 MB 864.35 MB
    76 launchd ianmac 0.0 532.00 KB 585.74 MB
    93 hpusbmond root 0.0 784.00 KB 586.77 MB
    101 HPIO Trap Monito root 0.0 1.43 MB 588.07 MB
    106 AirPort Base Station Agen ianmac 0.0 5.35 MB 2.75 GB
    110 Spotlight ianmac 0.0 3.98 MB 731.96 MB
    111 UserEventAgent ianmac 0.0 3.19 MB 598.84 MB
    112 Dock ianmac 0.0 9.99 MB 782.59 MB
    114 Finder ianmac 0.0 38.39 MB 322.15 MB
    115 ATSServer ianmac 0.0 5.17 MB 638.64 MB
    116 pboard ianmac 0.0 588.00 KB 586.61 MB
    119 coreaudiod root 0.0 2.39 MB 588.91 MB
    123 HP Event Handler ianmac 0.0 2.91 MB 721.91 MB
    125 iTunes Helper ianmac 0.0 2.43 MB 730.67 MB
    136 AppleSpell.service ianmac 0.0 3.63 MB 601.72 MB
    306 Console ianmac 0.0 23.08 MB 847.61 MB
    572 Safari ianmac 5.8 159.05 MB 1.11 GB
    704 Terminal ianmac 0.0 6.18 MB 797.03 MB
    798 Activity Monitor ianmac 15.7 21.17 MB 867.06 MB
    799 pmTool root 1.4 1.39 MB 595.69 MB
    988 SystemUIServer ianmac 0.1 12.73 MB 233.25 MB
    1159 TextEdit ianmac 0.0 9.45 MB 814.12 MB
    1418 cupsd root 0.0 1.91 MB 586.87 MB
    2226 Mail ianmac 0.0 41.83 MB 850.06 MB
    2361 helpdatad ianmac 0.0 8.14 MB 603.46 MB
    2718 Photosmart _lp 0.0 25.29 MB 689.89 MB
    2719 usb _lp 0.0 764.00 KB 586.62 MB
    2804 Network Utility ianmac 0.0 8.91 MB 798.14 MB
    2815 pppd root 0.0 1.62 MB 587.00 MB
    2859 Directory Utility ianmac 0.0 15.32 MB 822.47 MB
    2868 Help Viewer ianmac 0.0 9.70 MB 798.31 MB
    3118 mdworker ianmac 0.0 2.04 MB 598.43 MB
    * DIRECTORY SERVICE LOG *
    2009-07-05 03:39:57 PDT - T[0xA050D720] -
    2009-07-05 03:39:57 PDT - T[0xA050D720] - DirectoryService 5.7 (v514.25) starting up...
    2009-07-05 03:39:57 PDT - T[0xB0185000] - Plugin <Cache>, Version <1.0>, processed successfully.
    2009-07-05 03:39:57 PDT - T[0xB0185000] - Plugin <Configure>, Version <3.0>, processed successfully.
    2009-07-05 03:39:57 PDT - T[0xB0185000] - Plugin <Local>, Version <1.1>, processed successfully.
    2009-07-05 03:39:57 PDT - T[0xB0185000] - Plugin <LDAPv3>, Version <3.1>, processed successfully.
    2009-07-05 03:39:57 PDT - T[0xB0185000] - Plugin <Search>, Version <3.1>, processed successfully.
    2009-07-05 03:39:57 PDT - T[0xB0185000] - Plugin <BSD>, Version <2.0>, processed successfully.
    2009-07-05 03:39:57 PDT - T[0xB030B000] - Registered node /Configure
    2009-07-05 03:39:57 PDT - T[0xB030B000] - Plug-in Configure state is now active.
    2009-07-05 03:39:57 PDT - T[0xB040F000] - Plug-in LDAPv3 state is now inactive.
    2009-07-05 03:39:57 PDT - T[0xB038D000] - Registered Locally Hosted Node /Local/Default
    2009-07-05 03:39:57 PDT - T[0xB038D000] - Registered node /Local/Default
    2009-07-05 03:39:57 PDT - T[0xB0513000] - Registered Locally Hosted Node /BSD/local
    2009-07-05 03:39:57 PDT - T[0xB0513000] - Registered node /BSD/local
    2009-07-05 03:39:57 PDT - T[0xB0513000] - Plug-in BSD state is now active.
    2009-07-05 03:39:57 PDT - T[0xB038D000] - Plug-in Local state is now active.
    2009-07-05 03:39:57 PDT - T[0xB0491000] - Registered node /Search
    2009-07-05 03:39:57 PDT - T[0xB0491000] - Registered node /Search/Contacts
    2009-07-05 03:39:57 PDT - T[0xB0491000] - Registered node /Search/Network
    2009-07-05 03:39:57 PDT - T[0xB0491000] - Plug-in Search state is now active.
    2009-07-05 03:39:57 PDT - T[0xB0420000] - Local Plugin - index passed integrity check
    2009-07-05 03:39:58 PDT - T[0xB0289000] - BSD Plugin - index passed integrity check
    2009-07-05 03:39:58 PDT - T[0xB0289000] - Registered node /Cache
    2009-07-05 03:39:58 PDT - T[0xB0289000] - Plug-in Cache state is now active.
    2009-07-05 03:39:58 PDT - T[0xB0185000] - Plugin "Active Directory", Version "1.6.5", is set to load lazily.
    2009-07-05 03:39:58 PDT - T[0xB0185000] - Plugin "PasswordServer", Version "4.0.3", is set to load lazily.
    2009-07-05 04:12:10 PDT - T[0xB0081000] - Network transition occurred.
    2009-07-05 04:12:11 PDT - T[0xB0081000] - Network transition occurred.
    2009-07-05 04:16:03 PDT - T[0xB0103000] - Plugin "Active Directory", Version "1.6.5", loaded on demand successfully.
    2009-07-05 04:16:03 PDT - T[0xB0103000] - Plug-in Active Directory state is now inactive.
    2009-07-05 07:54:25 PDT - T[0xB0081000] - Network transition occurred.
    2009-07-05 07:54:25 PDT - T[0xB0081000] - Network transition occurred.
    2009-07-05 08:22:22 PDT - T[0xA050D720] - Sleep Notification occurred.
    2009-07-05 08:53:59 PDT - T[0xA050D720] - Will Power On (Wake) Notification occurred.
    2009-07-05 09:03:31 PDT - T[0xB0081000] - Network transition occurred.
    2009-07-05 09:03:31 PDT - T[0xB0081000] - Network transition occurred.
    i dont know if these logs help. BUT THANKS A MILLION. REALLY.

  • Multiple kernel panics related to java and NTFS

    Over the past week, I have experienced at least three separate kernel panics, but only two have had their event recorded by the System Diagnostic Reports.  I was wondering if there are any known issues that could cause kernel panic, such as the ones my system has received.  I have attached the result of the most recent panic below.
    Please note that I am running OS X 10.7.4 on a Mac Pro (early 2008) with 14GB RAM.  At the time the panics occurred, CrashPlan was in the process of backing up files (to CrashPlan Central) from my Boot Camp partition, which has Windows XP installed on a NTFS drive.  I mention this, because the fault appears to be related to NTFS and Java.  My understanding is that CrashPlan uses Java, and I don't believe I have many other (if any) applications running on it typically.
    I should also mentioned that I may have had Parallels Desktop running at the same time, and had a Windows XP virtual running the CrashPlan client for Windows that was overseeing the backup on my Synology DiskStation NAS.  At this time, I do not believe this is related to the panic, as I have been using Parallels in such a manner for weeks prior, and never received a panic.  Also, while the CrashPlan client in Windows also uses java, due to the VM sandbox, I believe the java is handled internally by Parallels, and doesn't utilize any java thread outside of Parallels.
    As I mentioned earlier, I have two recorded panics apparently caused by the same issue, having occurred in the "java" thread and related to "ntfs_attr_record_move_for_attr_list_attribute()".  I noticed that the other report also includes a section at the bottom for "System Profile" with information, such as:
    Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 14 GB, SMC 1.25f4
    Graphics: ATI Radeon HD 5770, ATI Radeon HD 5770, PCIe, 1024 MB
    Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
    Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
    Memory Module: DIMM Riser A/DIMM 1, 4 GB, DDR2 FB-DIMM, 800 MHz, 0x80AD, 0x485900503132354637324350344E332D5336
    ... ETC ...
    Why would some kernel panics include the system profile while others do not?  Are the panic logs "complete" or can they be incomplete due to the kernel locking up before writing the entire log?
    I have been using this system since 2008, and gone through numerous OS and Parallels updates over the years.  At this time, I appear to be update-to-date on all software.  I do not recall ever having received a kernel panic in the past, and if I have, it would have been extremely infrequent with the last occurring many years ago.
    An seemingly similar report:  https://discussions.apple.com/message/16566759#16566759
    Thu Jun  7 01:59:30 2012
    panic(cpu 1 caller 0xffffff7f80b50b57): "ntfs_attr_record_move_for_attr_list_attribute(): err\n"@/SourceCache/ntfs/ntfs-80.1/kext/ntfs_attr.c:3612
    Backtrace (CPU 1), Frame : Return Address
    0xffffff8197f9b590 : 0xffffff8000220792
    0xffffff8197f9b610 : 0xffffff7f80b50b57
    0xffffff8197f9b680 : 0xffffff7f80b68017
    0xffffff8197f9b7d0 : 0xffffff7f80b57b60
    0xffffff8197f9b880 : 0xffffff7f80b44bc9
    0xffffff8197f9b930 : 0xffffff7f80b38eea
    0xffffff8197f9b990 : 0xffffff80003196cb
    0xffffff8197f9b9d0 : 0xffffff80003183c7
    0xffffff8197f9ba60 : 0xffffff80002f6904
    0xffffff8197f9baa0 : 0xffffff80002f6e7d
    0xffffff8197f9baf0 : 0xffffff80002f7262
    0xffffff8197f9bb70 : 0xffffff80002f5eac
    0xffffff8197f9bc10 : 0xffffff8000308a62
    0xffffff8197f9bd90 : 0xffffff80003094ec
    0xffffff8197f9bf50 : 0xffffff80005cd61b
    0xffffff8197f9bfb0 : 0xffffff80002daa13
          Kernel Extensions in backtrace:
            com.apple.filesystems.ntfs(3.10.1)[13494759-5AEF-34F4-BD38-E47CDA5F2867]@0xffff ff7f80b31000->0xffffff7f80b8cfff
    BSD process name corresponding to current thread: java
    Boot args: -v
    Mac OS version:
    11E53
    Kernel version:
    Darwin Kernel Version 11.4.0: Mon Apr  9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
    Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
    System model name: MacPro3,1 (Mac-F42C88C8)
    System uptime in nanoseconds: 33615123826096
    last loaded kext at 27671676915162: com.apple.filesystems.ntfs    3.10.1 (addr 0xffffff7f80b31000, size 376832)
    last unloaded kext at 23373040217579: com.apple.driver.AppleUSBCDC    4.1.17 (addr 0xffffff7f807c6000, size 12288)
    loaded kexts:
    com.parallels.filesystems.prlufs    2010.12.28
    com.parallels.kext.prl_vnic    7.0 15094.749908
    com.parallels.kext.prl_netbridge    7.0 15094.749908
    com.parallels.kext.prl_hid_hook    7.0 15094.749908
    com.parallels.kext.prl_hypervisor    7.0 15094.749908
    com.parallels.kext.prl_usb_connect    7.0 15094.749908
    com.apple.filesystems.ntfs    3.10.1
    com.apple.filesystems.afpfs    9.8.1
    com.apple.nke.asp_tcp    6.0.1
    com.apple.filesystems.smbfs    1.7.2
    com.apple.filesystems.autofs    3.0
    com.apple.driver.AudioAUUC    1.59
    com.apple.driver.AppleHDA    2.2.0f3
    com.apple.driver.AppleUpstreamUserClient    3.5.9
    com.apple.driver.AppleMCCSControl    1.0.26
    com.apple.kext.ATIFramebuffer    7.1.8
    com.apple.ATIRadeonX3000    7.1.8
    com.apple.iokit.IOUserEthernet    1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager    4.0.5f11
    com.apple.driver.AppleMCEDriver    1.1.9
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AudioIPCDriver    1.2.2
    com.apple.driver.ACPI_SMC_PlatformPlugin    5.0.0d0
    com.apple.driver.AppleLPC    1.5.8
    com.apple.driver.CSRUSBBluetoothHCIController    4.0.5f11
    com.apple.iokit.SCSITaskUserClient    3.2.0
    com.apple.driver.XsanFilter    404
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    33
    com.apple.iokit.IOAHCIBlockStorage    2.0.3
    com.apple.driver.AppleUSBOHCI    4.4.5
    com.apple.driver.AppleAHCIPort    2.3.0
    com.apple.driver.AppleIntelPIIXATA    2.5.1
    com.apple.driver.AppleUSBHub    4.5.0
    com.apple.driver.AppleIntel8254XEthernet    2.1.3b1
    com.apple.driver.AppleFWOHCI    4.8.9
    com.apple.driver.AppleUSBEHCI    4.5.8
    com.apple.driver.AppleUSBUHCI    4.4.5
    com.apple.driver.AppleEFINVRAM    1.5.0
    com.apple.driver.AppleACPIButtons    1.5
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.6
    com.apple.driver.AppleSMBIOS    1.8
    com.apple.driver.AppleACPIEC    1.5
    com.apple.driver.AppleAPIC    1.5
    com.apple.driver.AppleIntelCPUPowerManagementClient    193.0.0
    com.apple.nke.applicationfirewall    3.2.30
    com.apple.security.quarantine    1.3
    com.apple.driver.AppleIntelCPUPowerManagement    193.0.0
    com.apple.security.SecureRemotePassword    1.0
    com.apple.kext.triggers    1.0
    com.apple.driver.DspFuncLib    2.2.0f3
    com.apple.kext.ATI5000Controller    7.1.8
    com.apple.kext.ATISupport    7.1.8
    com.apple.iokit.IOSurface    80.0.2
    com.apple.iokit.IOSerialFamily    10.0.5
    com.apple.iokit.IOFireWireIP    2.2.4
    com.apple.iokit.IOAudioFamily    1.8.6fc17
    com.apple.kext.OSvKernDSPLib    1.3
    com.apple.driver.AppleHDAController    2.2.0f3
    com.apple.iokit.IOHDAFamily    2.2.0f3
    com.apple.driver.ApplePolicyControl    3.0.16
    com.apple.driver.AppleGraphicsControl    3.0.16
    com.apple.iokit.IONDRVSupport    2.3.2
    com.apple.iokit.IOGraphicsFamily    2.3.2
    com.apple.driver.AppleSMC    3.1.3d8
    com.apple.driver.IOPlatformPluginLegacy    5.0.0d0
    com.apple.driver.IOPlatformPluginFamily    5.1.0d17
    com.apple.driver.AppleUSBBluetoothHCIController    4.0.5f11
    com.apple.iokit.IOBluetoothFamily    4.0.5f11
    com.apple.driver.AppleUSBHIDKeyboard    160.7
    com.apple.driver.AppleHIDKeyboard    160.7
    com.apple.iokit.IOUSBHIDDriver    4.4.5
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.2.0
    com.apple.iokit.IOUSBMassStorageClass    3.0.1
    com.apple.driver.AppleUSBMergeNub    4.5.3
    com.apple.driver.AppleUSBComposite    4.5.8
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.2.0
    com.apple.iokit.IOBDStorageFamily    1.6
    com.apple.iokit.IODVDStorageFamily    1.7
    com.apple.iokit.IOCDStorageFamily    1.7
    com.apple.iokit.IOATAPIProtocolTransport    3.0.0
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.2.0
    com.apple.iokit.IOAHCIFamily    2.0.8
    com.apple.iokit.IOATAFamily    2.5.1
    com.apple.iokit.IONetworkingFamily    2.1
    com.apple.iokit.IOUSBUserClient    4.5.8
    com.apple.iokit.IOFireWireFamily    4.4.5
    com.apple.iokit.IOUSBFamily    4.5.8
    com.apple.driver.AppleEFIRuntime    1.5.0
    com.apple.iokit.IOHIDFamily    1.7.1
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    177.5
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.DiskImages    331.6
    com.apple.iokit.IOStorageFamily    1.7.1
    com.apple.driver.AppleKeyStore    28.18
    com.apple.driver.AppleACPIPlatform    1.5
    com.apple.iokit.IOPCIFamily    2.6.8
    com.apple.iokit.IOACPIFamily    1.4

    What might I find by running XP natively?  I won't get kernel panics under XP.  I haven't run it natively in many months.
    I thought that Parallels actually uses Paragon NTFS (or at least a variant of it) to read and write to the NTFS drives.  It's possible that I am mistaken, as many years have passed since I last looked at Paragon NTFS.
    Is the Paragon driver intended to replace the OS X default NTFS driver or Parallels?  I'm not sure how Parallels will respond to the Paragon driver.
    Parallels should be up-to-date.  It reports build 7.0.15094.
    Regarding Windows XP, this is the only system I have that is still running XP on Boot Camp.  I rarely use it these days, and wouldn't be now, if I wasn't trying to back it up using CrashPlan.  My plan is upgrade when I have time.  All my other systems have Windows 7 on the Boot Camp drives.
    I do have a few VMs that use XP, because I haven't had the chance to replace them with Windows 7 installs, and they are generally used for infrequent development tasks and for running Beyond Compare.  Also, I believe there may have been license issues with the version of Windows 7 that I'm own when used with VMs (meaning they're not allowed) ... but don't quote me on this.
    I noticed that Riser B/DIMM 1 and 2 do not report the Manufacturer.  I'm pretty sure the 2GB and 4GB DIMMs are OWC.  The 1GB DIMMs are OEM from Apple.
    Memory:
    Memory Slots:
      ECC:          Enabled
    DIMM Riser B/DIMM 1:
      Size:          2 GB
      Type:          DDR2 FB-DIMM
      Speed:          800 MHz
      Status:          OK
      Manufacturer:          0x0000
      Part Number:          0x000000463732353642363145353830304600
    DIMM Riser B/DIMM 2:
      Size:          2 GB
      Type:          DDR2 FB-DIMM
      Speed:          800 MHz
      Status:          OK
      Manufacturer:          0x0000
      Part Number:          0x000000463732353642363145353830304600
    DIMM Riser A/DIMM 1:
      Size:          4 GB
      Type:          DDR2 FB-DIMM
      Speed:          800 MHz
      Status:          OK
      Manufacturer:          0x80AD
      Part Number:          0x485900503132354637324350344E332D5336
    DIMM Riser A/DIMM 2:
      Size:          4 GB
      Type:          DDR2 FB-DIMM
      Speed:          800 MHz
      Status:          OK
      Manufacturer:          0x80AD
      Part Number:          0x485900503132354637324350344E332D5336
    DIMM Riser B/DIMM 3:
      Size:          Empty
      Type:          Empty
      Speed:          Empty
      Status:          Empty
      Manufacturer:          Empty
      Part Number:          Empty
    DIMM Riser B/DIMM 4:
      Size:          Empty
      Type:          Empty
      Speed:          Empty
      Status:          Empty
      Manufacturer:          Empty
      Part Number:          Empty
    DIMM Riser A/DIMM 3:
      Size:          1 GB
      Type:          DDR2 FB-DIMM
      Speed:          800 MHz
      Status:          OK
      Manufacturer:          0x80AD
      Part Number:          0x48594D5035313241373243503844332D5335
    DIMM Riser A/DIMM 4:
      Size:          1 GB
      Type:          DDR2 FB-DIMM
      Speed:          800 MHz
      Status:          OK
      Manufacturer:          0x80AD
      Part Number:          0x48594D5035313241373243503844332D5335

  • Leopard 10.5.7 refuses to launch applications after "erase and install"

    I have an older iMac G5 (1.6Mhz PPC, 2 Gb RAM) born with Panther OS. I wanted to update some applications so I could have a secure browser and other apps. I upgraded the RAM to 2 Gb as a first step. The additional RAM really perked up the old iMac so the next step was to update the OS to 10.5.6 using a DVD that was printed in Jan '09 and sold as part of a bundle pack with the new iLife 09 and iWork 09.
    I thought I could get away with an overwrite installation and I knew there were risks in doing that. The result was a really bugey computer with frequent terminal views, kernel panics and even hard shut downs. Apple issued the 10.5.7 update and that helped stabilize the system somewhat.
    I still had problems with instablility of the OS and with Safari 3.2.3, Firefox 3 and other applications. I decided to reinstall Leopard using the archive and install procedure. The 2nd install stabilized the OS but I still had problems with browsers and Open Office refusing to launch.
    I did lots of troubleshooting using Onyx, MemTest OSX, repair permissions in the Disk Utility, etc. I created a new user account and the problems persisted. I decided to try a third install of the OS using the Erase and Install procedure.
    The system now has Safari 4.0.1 but after a few page views Safari crashed and now it crashes as soon as you launch it. A freshly downloaded Camino browser does the same thing. iTunes, System Profiler and a fresh download of Onyx also refuse to launch. All of them crash while launching.
    I can launch an ancient version of IE and Firefox 3 from the desktop.
    After the last OS X install, I noticed the system did not accept the first attempts at downloading the Leopard updates and the Safari update. A second attempt was successful for both. I am reluctanct to proceed with installing anymore applications until I can fix what I believe is a problem with the OS. The OS worked well after the archive and install procedure and I am thinking it should be able to work at least as well after the erase and install.
    I live in a rural area and the nearest Apple "genius" counter is about a 5 hour round trip. Is there anyone out there that has encountered this problem?

    The Internet Explorer came with the iMac and I never used it. I had it on a disk so I put it on the desktop to get a download of Camino after Safari failed. It's so old that most websites can't render for it unless they have some html default page.
    Here is what the Crash Reporter log had. The iTunes was on the OS X install disk. The Camino browser was downloaded from Caminobrowser.org.
    Process: iTunes [275]
    Path: /Applications/iTunes.app/Contents/MacOS/iTunes
    Identifier: com.apple.iTunes
    Version: ??? (???)
    Build Info: iTunes-8202301~15
    Code Type: PPC (Native)
    Parent Process: launchd [67]
    Date/Time: 2009-07-04 21:34:25.644 -0700
    OS Version: Mac OS X 10.5.7 (9J61)
    Report Version: 6
    Anonymous UUID: 17FE9D2E-ED3C-44C8-BD16-23C937CA83AE
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000001, 0x000000008fe0105c
    Crashed Thread: 0
    Dyld Error Message:
    Symbol not found: __ZN7WebCore11RenderLayer18gAlignCenterAlwaysE
    Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
    Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
    Process: Safari [118]
    Path: /Applications/Safari.app/Contents/MacOS/Safari
    Identifier: com.apple.Safari
    Version: ??? (???)
    Build Info: WebBrowser-55301800~1
    Code Type: PPC (Native)
    Parent Process: launchd [67]
    Date/Time: 2009-07-04 21:14:45.039 -0700
    OS Version: Mac OS X 10.5.7 (9J61)
    Report Version: 6
    Anonymous UUID: 17FE9D2E-ED3C-44C8-BD16-23C937CA83AE
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000001, 0x000000008fe0105c
    Crashed Thread: 0
    Dyld Error Message:
    Symbol not found: __ZN7WebCore11RenderLayer18gAlignCenterAlwaysE
    Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
    Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore
    Process: Camino [361]
    Path: /Volumes/Camino/Camino.app/Contents/MacOS/Camino
    Identifier: org.mozilla.camino
    Version: ??? (???)
    Code Type: PPC (Native)
    Parent Process: launchd [67]
    Date/Time: 2009-07-04 22:14:43.753 -0700
    OS Version: Mac OS X 10.5.7 (9J61)
    Report Version: 6
    Anonymous UUID: 17FE9D2E-ED3C-44C8-BD16-23C937CA83AE
    Exception Type: EXC_BREAKPOINT (SIGTRAP)
    Exception Codes: 0x0000000000000001, 0x000000008fe0105c
    Crashed Thread: 0
    Dyld Error Message:
    Symbol not found: __ZN7WebCore11RenderLayer18gAlignCenterAlwaysE
    Referenced from: /System/Library/Frameworks/WebKit.framework/Versions/A/WebKit
    Expected in: /System/Library/Frameworks/WebKit.framework/Versions/A/Frameworks/WebCore.frame work/Versions/A/WebCore

  • How do I erase and install iMac to factory settings using Install disk?

    Once in a while I like to do an erase and install to boost performance and get rid of extra unused files/applications on my computer that are inevitably slowing things down. I have already tried disk repair and that isn't helping.
    The problem is now that Lion/Mountain Lion no longer support PowerPC applications, I can't figure out how to use the Install Disk that came with my computer. My computer came with 10.4 (Tiger). I have been unable to erase and restore my computer to it's original factory settings.
    I have read a bunch of threads that say to hold down the "C" key, but nothing happens when I do this. The computer just starts up like normal.
    The reason I want to do this is because my computer is going slower and slower all the time. I have the "Free Memory" app and I can see my memory decreasing slowly day by day. It goes from about 3GB to less than 1GB in a few days. If I restart, I'm back up to 3GB again.

    You had to use Snow Leopard to install Lion or Mountain Lion, so you can downgrade to Snow Leopard:
    Downgrade Lion/Mountain Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.
    Booting From An OS X Installer Disc
    1. Insert OS X Installer Disc into the optical drive.
    2. Restart the computer.
    3. Immediately after the chime press and hold down the "C" key.
    4. Release the key when the spinning gear below the dark gray Apple logo appears.
    5. Wait for installer to finish loading.

Maybe you are looking for

  • Loops to a PC

    I have garageband on my Ipad and would like to import new loops, but I only have a PC.  Is this possible and how?

  • Satellite L500 - blank blue screen after login to Win 7

    Hi I have this laptop and i can start up the laptop and it loads fine to the login page i then can login but when the screens opens after login it appears as a blank blue screen with the document folder open i have no background picture and no startu

  • SELECT TABLE BASED ON CONDITION

    hi every one , i need your help in resolving this issue . if you look at the last column service_id in the select the value of the service_id is derived from by the source_system. each source system can have 1 to multiple service_ids . the below quer

  • Please I had a Problem in my IMAC and if someone can help me

    Interval Since Last Panic Report:  2028273 sec Panics Since Last Report:          14 Anonymous UUID:                    XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX Sat Jan 26 16:12:32 2013 panic(cpu 1 caller 0xffffff80100b7bd5): Kernel trap at 0xffffff7f915c072

  • How to make a link open up a mobile app?

    I have a mobile website and I would like the links to social medias to open up the associated app rather than a url in a browser. For example, when I click the link to my facebook page, how can i get it to open up the facebook app? Thank you