Lion keyboard problem with shift keys

After installing lion the shift keys open things like expose.
How can i assign them to their old function?

I have a wired usb keyboard. It has F3 for Mission control and F4 for dock.
In System preferences, Dutch language by the way, in the Keyboard pane, key combinations, Mission control is also assigned to ctrl up. That would be the right one, I pressed the reset button, no change.
Now I tried selecting my keyboard, it was not recognized and pressing the key next to the left shift only gives a warning sound.
I will try some combinations with disconnected keyboards and another keyboard with reboot, to see if anything changes....

Similar Messages

IOS 7, iPad 4: keyboard problems with Shift key

Since I have upgraded my iPad 4 to iOS 7 a few days ago the keyboard drives me mad: I did not experience the overall slowness of the keyboard as reported by so many others. Anyway, I reset my settings just to be safe. But the reset had absolutely no influence on my real problem which is as follows:
Whenever and wherever (each app) I type, it is just a matter of luck whether or not the keyboard will recognise me typing the Shift key in order to get capital letters - and there are many caps in German words because each noun must be in caps! In 70% of all cases iOS will just write my capital letters as lower-case ones because it just does not recognise me hitting the Shift key, especially when typing quickly. Under iOS 6 this problem did not exist. I am losing so much time fixing missing capitalisation in all my texts (I use iPad for business) and/or typing extra slow and hitting the virtual Shift key on the screen extra hard that there is absolutely no flow in typing. Everything is just slow, whacky and it drives me nuts! How can it be that the latest iPad 4 with so much CPU power cannot handle a simple thing as typing caps? I am also experiencing problem when using the wipe-up gesture to get umlauts on vowels. It is not as bad as with Shift, but also noticeable.
Is there any solution to this problem? It is a major impediment and I am even considering an iOS downgrade because it is basically killing my ability to work efficiently with my iPad. Otherwise I am kinda okay with iOS 7, but this is a real show stopper. I wonder why I found nobody else on the whole web mentioning this problem.

Thank you Habitoti for describing the necessary change to the way that we need to type on ios devices to avoid the capital letter problem.
Holding the shift key fractionally longer solves the problem. But why oh why would Apple require users to fundamentally change the way they touch type by introducing a different keyboarding protocol like this? It is most unlike Apple to have us now have to consciously think about how to touch type all over again.
Intuitive operating systems are what make Apple so great. This keyboard problem is definitely not intuitive and it is driving me crazy.
Apple, you need to change the time weighting on the shift key in iOs 7.04.
Please, pretty please!

MacBook Pro Keyboard problems with shift and enter

would really appreciate help here. neither of the shift keys works, as you can see. the enter key doesn't do anything either. some of the function keys are also not working but i'm less concerned by those.
i activated the keyboard viewer and can see that the key between the right command key and the left arrow key now acts as the enter key. however the shift keys don't register at all.
i'm pretty sure the keys all worked when i first bought the computer in november. also keys work normally when i use the wireless keyboard.
i get the problems whether the wireless keyboard is connected or not.
does anyone know the answer to this problem - it's also annoying not having access to the question mark or any of the smbols above numbers - caps lock doesn't give you access...

If the problem is the same one I have and many others have expressed, it's the small gold ribbon found beneath the battery. It seems that lots of them are failing, although Apple won't acknowledge the problem and the fix is expensive (~$300).
To find out if it is the problem, remove the battery (with the computer plugged in and powered on), press down on the small cable, and see if the keyboard/mouse become responsive. Some people have taped the cable with success, but mine only works with constant hard pressure. So, it's been retired as a laptop and has essentially become a desktop with a USB cable/mouse.

Annoying problem with shift key in limit dialog Brio 6.6.4

<p>My company uses Brio Insight & Designer v6.6.4. We (meaning almost all users) are encountering an annoying problem whenadding a limit to a query using the limit dialog. When try toenter a limit value using the shift key, as in Shift T to enter acapital T, the limit value field ends up with a value like"TTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTTT". Thisis very annoying and widespread problem with us. It seemed tostart when we upgraded to Win XP SP2. Is there a solution forother than to "upgrade to the latest version"?</p>

Unfortunately not. The only way we avoided this issue was to upgrade or write the text into a text editor and cut and paste the text into the section name box.

Keyboard problem - alt & shift key switch

Suddenly the alt & shift keys have switched functions but only for the "3" key along the top of the keyboard. Previously shift + 3 gave the pound sterling sign, but this is now alt + 3, which took some finding, shift + 3 is this sign #. I would like the pound sign back at shift + 3 where it's shown. I can't find anything to show how to do this, or why it changed in the first place. Please help.
Thank you.
Janet.

Perhaps the System Preferences have been changed from a British keyboard to a US keyboard. Go to Sys Prefs/Lang & Text/Input Sources to check what is selected.
Dah•veed

MacBook stuck with shift key enabled and numbers not working - even the keyboard app in languages wont type lowercase nor numbers?! Anyone know whats up? no spillage...cant understand why the keyboard app wont do anything.

Anyone have a clue? I can understand the keyboard being broke / shift key being stuck but why in the world would I not be able to type the numbers on the language keyboard app on the operating system? Numbers show up on the app but when I press them I still get the special characters like #^&#* and it wont type lower case. Nothing has ever been spilt, just stopped working one day. Rebooted from Time Capsule restore dated a month ago and its still doing it. (problem started two weeks ago). Only way to get lower case or numbers to actually show up is the copy and paste.
Any help would be amazing!
Details on computer: 13 inch MacBook6, 1 (Late 2009) / Intel Core 2 DUO / 2.26GHZ / 2GB / Memory running Mac OS X Lion 10.7.5

If you can afford it, I would recommend replacing the topcase and keyboard as Apple suggests. If like me, you can't afford it or are open to a hack fix, then read on.
The problem
Yesterday, a little water spilt on my 13" MBP keyboard. I turned it around immediately, drained out the water and used tissue to suck it all up but the keyboard was still acting funny. I turned it off and left it out in the sun for a couple of hours and turned it on again but problems remained. Like Rickdubya, my warranty had run out just a month ago and I knew Apple would not cover this under warranty. I tried to clean the shift keys and left it overnight with some rice on them with hopes that the moisture might get sucked out. Nothing worked. (The rice bit is an urban legend that seems to work with some electronics). Went to the Apple Store this morning and was told that they wouldn't even take out the key and clean it, and that the entire top case would have to be replaced. A total bill of 156 Euros which I cannot afford. I had a USB keyboard that would let me use the Mac for the moment so I decided to try to work out a fix.
Symptoms
- Boots in safe mode everytime (which I later found out was because the shift key is pressed)
- Cannot login because password is in lower case or has numbers
- Cannot boot in super user mode and try to disable keys or override password as some commands won't work in uppercase (I wouldn't recommend this anyway because its super user mode)
- All text is in caps and numbers are symbols as though shift key is always pressed
- Audio doesn't work
- Keyboard viewer would not always show the shift key pressed. The key seemed to get pressed at random
Fix
1. Hold the Option button down on boot to bypass the Safe Mode ensure a normal boot
2. At the login screen, plug in a USB keyboard and enter your password to login
3. Change your password to one that uses all caps and no numbers
4. Download and install KeyRemap4MacBook .
5. Use a combination of the functionalities of the Keyboard Viewer and KeyRemap4MacBook to figure out which shift key is the problem. In my case, I found out that it was only my left shift key.
6. Disable the left/right shift key on KeyRemap4MacBook and click on the 'Reload XML' button to make that take effect.
If only one shift key was the problem, then you are done. If both shift keys were shorted, then its likely other keys are too. In which case you should probably just replace the entire thing. If you think other keys are not affected, then you can use KeyRemap4MacBook itself to remap the shift functionality to a lesser used key like the Left Option key.
7. Under System Preferences > Users & Groups > Login Items , add KeyRemap4MacBook as an application that should start on login. This will ensure that your disable/remap of the shift key is active everytime you login.
Usage change/Things to remember
1. Remember to hold down the Option key everytime the computer boots or reboots to bypass safe mode. The fix above is at the software level. The key is physically still shorted at the hardware level and will affect boot.
2. Remember that at the login screen, the disable/remap is not active. So your password now has to be all caps and only letters.
As soon as I can save some money, I will get my topcase and keyboard replaced but until then this solution works great with minimal change. Hope this helps!

Having problem with dead key in Leopard

Hello. I'm having problem with dead key in Leopard.
In Tiger it was working, but in Leopard dead key "'" doesn't work.
In Tiger I could use OPTION key as well to get Latvian special characters (both worked - OPTION Key and dead-key), but in LEOPARD OPTION key is the only possibility to get these characters.
How can I get dead key "'" working?
I'm using Latvian language with Latvian keyboard layout.
Here are images how it looked in Tiger:
1) Before dead key is pressed:
http://amerix.no-ip.org/tmp/1.tiff
2) After dead key is pressed:
http://amerix.no-ip.org/tmp/2.tiff

ok, i got answer
so - first problem was that ukelele didn't work in leopard (it wasn't possible to start new layout), but it was possible to edit Tom Gewecke posted layout.
There it is possible to change every thing (dead-key as well).
So I edited it and now i have layout where dead-key works -
http://amerix.no-ip.org/tmp/LatvianT.keylayout
Just do what Tom Gewecke said with this layout. It should work!

Problem with [shift-f1]-[shift-f4] in xterm

I have run into some problems with the function keys on an xterm. The shifted versions of F1-4 don't work as expected. I found this thread:
https://bugs.launchpad.net/ubuntu/+sour … +bug/96676
discussing what seems to be this issue, having to do with some change in the terminfo data for various flavours of xterm. It apparently applies to gnome-terminal too, but not to Konsole, since it uses TERM=linux and not vt220, as far as I understand it. I can confirm this on my part too.
The discussion there is inconclusive, so I just wanted to know if (a) anyone else here experiences the same problem (specifically, I have mapped <S-f4> to :wq in vim, but in xterm, it doesn't work. Changing to <S-f5> does work), (b) if this is a gnome/ubuntu-problem or a problem with xterm itself or some other library, and (c) if someone here knows of a fix, either temporary or permanent. At present, S1-4 are useless...

Personally, I prefer to use a single shift register and an array with two elements. Minimizes code clutter.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
problem with shift registerCA.vi ‏13 KB

Keyboard problems with Enter, delete, backspace, and right/left arrows

In some applications, such as Yahoo and this message block right now !!, when composing a message, the arrow keys and delete, backspace keys become non responsive. Various ones will work on a random basis.
I am getting double "carriage returns" also. Maybe this is why in Omegle when I press ENTER, it will not post a chat message; it will bring up a scroll box and for me to post the comment, I have to use the mouse to click ENTER.
I have changed batteries in my keyboard, uninstalled /reinstalled Firefox. I have checked the above websites in Chrome and other browsers, and there are no problems.
This has happened before, I don't recall what the solution was or if it just went away.'''
Affected sites -- at least these
http://us.mg6.mail.yahoo.com/neo/launch?ncrumb=Fx5R4O7ccqb&.rand=1041364415&nmig=yes#
http://omegle.com/
https://support.mozilla.com/en-US/questions/new?product=beta&category=b2&search=Keyboard+problems+with+Enter%2C+delete%2C+backspace%2C+and+right%2Fleft+arrows&showform=1

PROBLEM SOLVED: http://forum.archlinux-br.org/viewtopic.php?id=1257
Solution posted on Brazilian Archlinux forum. Credits to user "920608".
[cache]
/etc/xorg.conf
Section "Files"
#RgbPath "/usr/X11R6/lib/X11/rgb"
EndSection
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
C'ya

Mapping problem with compressed key update record

Hi, could you please advise?
I'm getting the following problem:
About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
So I got Mapping problem with compressed key update record at 2012-06-01 15:44
I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
I don't know if it has ther same source as data corruption, could you tell me if it is?
Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
If I run extract beging at 15:52 it starts and works.
But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
I'm replicating from SQL Server 2008 to Oracle 11g.
I'm actually using NOCOMPRESSUPDATES in Extract.
CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
Could you please advise why does it happen?

Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
Here are extract parameters:
EXTRACT ETCHECK
TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
SOURCEDB TEST, USERID **, PASSWORD *****
exttrail ./dirdat/ec
NOCOMPRESSUPDATES
NOCOMPRESSDELETES
TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
TABLE tst.table2, COLS (field1, field2, field3, field4 );
Data pump:
EXTRACT DTCHECK
SOURCEDB TEST, USERID **, PASSWORD *****
RMTHOST ***, MGRPORT 7809
RMTTRAIL ./dirdat/dc
TABLE tst.table1;
TABLE tst.table2;
Replicat:
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
Rpt file for replicat:
Oracle GoldenGate Delivery for Oracle
Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
Starting at 2012-06-05 12:49:38
Operating System Version:
Microsoft Windows Server 2008 R2 , on x64
Version 6.1 (Build 7601: Service Pack 1)
Process id: 2264
Description:
** Running with the following parameters **
REPLICAT rtcheck
USERID tst, PASSWORD ***
DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
SOURCEDEFS ./dirdef/sourcei.def
HANDLECOLLISIONS
UPDATEDELETES
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
CACHEMGR virtual memory values (may have been adjusted)
CACHEBUFFERSIZE: 64K
CACHESIZE: 512M
CACHEBUFFERSIZE (soft max): 4M
CACHEPAGEOUTSIZE (normal): 4M
PROCESS VM AVAIL FROM OS (min): 1G
CACHESIZEMAX (strict force to disk): 881M
Database Version:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
Database Language and Character Set:
NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
NLS_LANGUAGE = "AMERICAN"
NLS_TERRITORY = "AMERICA"
NLS_CHARACTERSET = "CL8MSWIN1251"
For further information on character set settings, please refer to user manual.
** Run Time Messages **
Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
MAP resolved (entry tst.table1):
MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
Using the following default columns with matching names:
field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
Using the following key columns for target table R_019_000001.TCALCULATE: field3.
2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
Source Context :
SourceModule : [er.main]
SourceID : [er/rep.c]
SourceFunction : [take_rep_err_action]
SourceLine : [16064]
ThreadBacktrace : [8] elements
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
: [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
: [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
: [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
: [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
: [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
* ** Run Time Statistics ** *
Last record for the last committed transaction is the following:
Trail name : ./dirdat/dc000000
Hdr-Ind : E (x45) Partition : . (x04)
UndoFlag : . (x00) BeforeAfter: A (x41)
RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
IOType : 115 (x73) OrigNode : 255 (xff)
TransInd : . (x03) FormatType : R (x52)
SyskeyLen : 0 (x00) Incomplete : . (x00)
AuditRBA : 44 AuditPos : 71176199289771
Continued : N (x00) RecCount : 1 (x01)
2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
Name: DBO.TCALCULATE
Reading ./dirdat/dc000000, current RBA 987, 0 records
Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
From Table tst.table1 to tst.table1:
# inserts: 0
# updates: 0
# deletes: 0
# discards: 1
Last log location read:
FILE: ./dirdat/dc000000
SEQNO: 0
RBA: 987
TIMESTAMP: 2012-06-01 15:48:56.285333
EOF: NO
READERR: 0
2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
Discard file:
Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
Key column filed3 (0) is missing from update on table tst.table1
Missing 1 key columns in update for table tst.table1.
Current time: 2012-06-05 12:58:14
Discarded record from action ABEND on error 0
Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
error at seqno 0 rba 987
Problem replicating tst.table1 to tst.table1
Mapping problem with compressed key update record (target format)...
filed1 = NULL
field2 =
field3 =
field4 =
field5 =
datefield = -04-09 00:00:00
field6 =
field8 =
field9 = NULL
field10 =
Process Abending : 2012-06-05 12:58:14

Mapping problem with compressed key update record (target format)...

Hi Guys,
Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
How to overcome this issue, any idea...
2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
*= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
*Mapping problem with compressed key update record (target format)...*
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
04 10:35:05
Current time: 2011-08-04 10:35:06
Discarded record from action ABEND on error 1407
OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
(status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
error at seqno 68708 rba 44132192
Problem replicating INFRA.CUST to INFRA.CUST
Mapping problem with compressed key update record (target format)...
ORD_QTY = 500
ORD_PRICE = 37430
SCRP_CODE =
MKRT_CODE = N
Any inputs / help would be appreciated.
Regards,
Manish

The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

Problems with fuction keys for brightness

i have laptop hp 15 r006tx Product number: G8D30PA#ACJ
i have problems with functions keys for brightness , actually it does't works i can't actually adjust brightness, please help me.....................

OK...
I was right. You have no graphics driver installed for the Intel HD graphics adapter.
I am very surprised you were able to install the nVidia driver because usually you get an error that states you need to install the Intel graphics driver first.
Once you install this driver, the Microsoft Basic Display adapter should be replaced by an Intel HD graphics adapter and you should be able to adjust the screen brightness.
Make sure you have installed this Intel chipset driver first and reboot. If you have done this already, you can skip this step.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130504-1&cc=us&dlc=en&lc=en...
Next, install the Intel HD graphics driver and reboot. This driver is for W8.1. If you installed W8, you need a different graphics driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-130257-1&cc=in&dlc=en&lc=en...

Problem with a key figure restriction

Hi,
I have a problem with one key figure in report: in infocube, this key figure is aggrigated for all the profit centers (summation). In infocube, there is a value '150' for each profit centers (100 pieces) and in the report it is counting 150*100=15000. However, it shouldn't count the sum of all entries in the infocube but show only one value in the report which would be '150'.
I think this should be possible to do but I just don't know how. Hope somebody is able to help me. Thanks in advance.

Hi,
If the values are same for all profit center then change the Profit center infoobject property in the query design to show the maximum values for the 'calculation result as' parameter
Regards,
Vishwa,
Edited by: Vishwanath H.E on Sep 3, 2008 9:19 AM

I'M HAVING PROBLEM WITH FUNCTION KEY, I'M HAVING PROBLEM WITH FUNCTION KEY

Hello everybody
Recently i'm having problem with function key of iphone4, now its working assistive touch key board , between these days i had restored and update then it work for next 12 hour after that it again stoped..
pls help me from this isssue,
thanking you.

There are no function keys on the iPhone.
Please clearly state the issue that is occurring.

Problem with Internet Key Onda Mt835Up: It doesn't work with mac os 10.6.6

Hi I have a problem with internet key Onda MT835UP. It doesn't work, because my imac is more new than internet key.
Can you help me? Can you send me the upgrade for this internet key?
Thanks

I have called Onda, there isn't the driver for Mac OS X 10.6.7 and they don't know if it'll be released.
So if you have a Mac it's better to not buy Onda internet key,
instead it's better to choose other brands that update the drivers of their products.

Lion keyboard problem with shift keys

Similar Messages

Maybe you are looking for