Lion on ssd crashed! Disk utility 'cannot repair the disk' HELP!!!

Fortunately I got a time machine backup. And its restoring the drive while in Lion recovery mode. Here's what happened...
I dont have a router a my place at the moment and so my two phones (iphone 4 and htc android) connect to my internet using my MBP's wifi via internet sharig. For some reason they were not able to get an IP from the mbp. After doing some wifi swtich toggles and forgettig & rejoining the network, i decided to reboot all my devices. I shut down my modem, phones and restarted my mbp. On reboot, after the chime, it showed an unsusal 'progress bar' under the apple logo. The bar progressed to about 10% and then the mbp just powered off. This happened several times even after PRAM and SMC reset.
So now i booted with cmd+r pressed and in recovery mode ran a 'verify disk'. It said the verification stopped and that i should repair the disk. When i tried to do that it said the disk cannot be repaird and that i should back up as many files as possible and attempt to format the disk and restore it with time machine. It is precisely what im doing at the moment.
This ssd is a ocz octane sata 2 ssd about a month old. What could have gone wrong???
Neerav
Ps. Two things i was facing as possible symptoms of a logic board failure were...
1. Mbp wont sleep even when internet sharing is off
2. Mbp wont lit the onboard display upon opening it in clamshell mode untill i removed the 3.5mm audio cable of my speakers from the audio out port!
Please advice...

I have resolved a major disk failure in formating my ssd and then reinstalling the OS and then using time machine to get my config back. in 1 hour the problem was solved.
If formating the ssd is not enough, delete the partition and recreate everything.
The CD given with the mac have the correct tools to do it.
At worst you can scratch the partition with a windows computer and then recreate everything with the mac after. (i was obliged to use this method to recover an other hd failure on a non ssd disk.
If your computer have some trouble to start up, maintain the left button of the mouse activated during the boot. (it can happen if a cd is blocked on the computer during a bootcamp installation.)

Similar Messages

  • Disk Utility stopped repairing the disk. I was instructed to backup as many of my files as possible.reformat the disk and store my backed files.  I am using an I Mac 2010.  I am not sure what caused this problem.   I use time machine

    Disk Utility stopped repairing the disk. I was instructed to backup as many of my files as possible.reformat the disk and restore my backed up files.  Since I use time machine, can I assume that all my files and programs can be restored from my recent back ups? 

    Hi jeromefrodia, 
    Welcome to the Apple Support Community!
    I understand that you are concerned about your data before reformatting the disk. Because you use Time Machine your information should be safe. Please refer to the attached article for information about what Time Machine backs up and how to restore from that backup. 
    Mac Basics: Time Machine backs up your Mac
    Cheers,
    Joe

  • MBA won't reboot from remote disk to reach Disk Utility and repair the disk

    After a routine disk repair session, it advised me that I need to repair the disk on my MBA. A few months ago it was the same, and I did it quite successfully without any problems, according to instructions: inserted the MacOS 10.6 DVD into the iMac optical drive, launched Remote Install OS, and so on. However, now my MacBook Air refuses to boot from the remote disk, so that I can reach the Disk Utility and proceed to repair disk. It sees the remote DVD Installer disk, I connect to my home WiFi, and I choose reboot from the Install DVD disk. An Apple logo appears on a grey screen with a small globe spinning below, but after a some lengthy minutes it always reboots normally!!! It seems I tried everything many times to no avail.
    Any solutions???

    Nope. Waiting for 10.6.4 update, which is hopefully next week and may change the situation for better.

  • Disk Utility cannot repair startup volume, and where's my AppleCare cover?

    Hi all,
    The 250GB SATA drive on my Power Mac G5 Dual 2.5GHz has some 'issues' that Disk Utility cannot repair. It says, "Invalid sibling" and something about "key not found" or "keys out of order". I've run fsck -fy in single-user mode but it drops out saying "(4, 18880) error".
    I have AppleCare Protection for it until November, but when I log into Apple's site, it says I have no current agreements. I'm at work at the moment and don't have my serial number, so I can't really call them up (and I don't have their phone number to hand...).
    Is the hard drive covered under AppleCare?
    I don't want to purchase any more software to fix the disk, i.e. Alsoft's DiskWarrior, unless it can be delivered instantly and will work on these problems?
    Any help is much appreciated :o)

    Thanks for that.
    I was willing last night to re-install the OS to see if it was a software problem, but booting into the Tiger install DVD reported the same problems, however it was a little more informative than fsck. It says there are issues on the first two partitions on the boot drive. (I have OS X, Apps and Games partitions on that drive.)
    I tried repairing the partitions in different orders, just in case it would help, but it still failed.
    If I were to call AppleCare while at work, without the serial number, would they be able to locate my agreement and sort out a repair? APP was bought with the machine and I assumed it would've been registered at that time, but the website says I have no agreements...? Anyone got their phone number?

  • My HD needs to be reformatted according to Disk Utility, but even when I use an external device for startup, Disk Utility cannot reformat the HD

    I have a Macbook with a 500 GB Hard Drive. A routine check on Disk Utility told me the disk needed to be reformatted. I restarted from an external USB drive, but when I try to use Disk Utility to repair the HD or to reformat it, Disk Utility is unable to do anything with the HD (cannot repair, cannot erase,cannot reformat the HD).  Is there a utility App that can help me with this, or is the HD unrecoverable?

    Hi
    Thanks very much for your reply. We have been starting up from a backup (USB) drive and use the disk utility that is on the backup drive so the internal (problem) HD is not being used for anything (except for wanting to repair it). Still Disk Utility cannot reformat or repair the drive. I have also run Onyx but it tells me everything is OK on the drive.
    But I have made a little progress. Using my old install disk for Snow Leopard (10.6.3) I have managed to do a fresh install of the system on the internal HD. Unfortunately, I also asked the install disk to transfer/migrate the settings and documents from the backup drive back onto my internal HD. The install appeared to work, but then it got hung up on copying the documents from my backup drive to the HD. After letting it sit for 2 days without going anywhere, I stopped the install process. I am going to try again, just using my Snow Leopard  CD to install Snow Leopard, and nothing else. If that works, I will then get on to the problem of copying the rest of the settings and documents from my backup.
    But since the Mac works OK off the USB  backup, and will also run off the install CD, I am guessing the problem is with the HD and the only solution might be to replace it if I can't repair it. But the macbook is several years old, and I am not sure it is worth buying a new HD for it.

  • Lion Install thinks that the system disk "Macintosh HD" is not Mac OS Extended (journaled); it is. Exactly what do I do in Disk Utility to "reformat" the disk, I don't see that listed on the menus.

    Error Message, during installation of Lion; “This disk is not formatted as Mac OS Extended (journaled). Use Disk Utility to enable journaling or reformat the disk.”  The disk I selected to install OS X on, was the only one listed, “Macintosh HD”. The results of a Disk Utility check are; Format: Mac OS Extended (journaled), Name: Macintosh HD. There is a fresh Time Machine backup. The computer was Restarted and installation attempted again - same result. I have downloaded Lion a second time, and tired install again, same results. The computer is a December 2007, iMac 24” with 2.4 GHz Intel Core 2 Duo, 4 GB Memory, s/w version 10.7.5; Disk Capacity 319 GB, Available 117 GB. Macintosh HD has alway been the system disk, does it now have an identity crisis? Would reformatting the disk mean Erasing it? Exactly what do I do in Disk Utility to “reformat” the disk, I don’t see that listed on the menus. This computer is getting cranky, I no longer Shut Down at night, only Sleep. If it’s Shut Down, the next morning I am treated to a white screen, for a long time, before it finally shows me the Log On Screen.  Suggestions would be appreciated.

    RRFS - This took me a long time to finally get to a fix. Your reply led me to investigate the Repair Disk Partition - as it turned out there wasn't one; the HardDrive was going bad slowly. The 10 to 40 minutes it took to startup in the morning, was the HD trying to find it's way. I had the 320GB HD replaced with a 2TB HD. All is OK now. Thank You very much!!  Also, the Apple store geeks couldn't make it better but the locally owned Apple retailer did just great with it. from San Luis Obispo County - Peace.

  • I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

    I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down  command+optoion+p+r and still nothing???
    Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

    Unless your iMac is still covered by AppleCare, get an external DVD burner.
    You can get perfectly good ones from Amazon for less than $40.

  • How do I do this:  "This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk?"

    "This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk."

    Stick the disk in, reboot holding c.
    Disk Utility is a menu option about the 2 or 3rd screen in the installer. (don't install OS X!)
    Because your booted form the installer disk, you can repair the disk.
    Quit and exit the installer and reboot.
    If your drive is not repaired, make a note of all what it says, for Apple to use.
    Reboot and get your files off to a external drive,
    Take the note and your comptuer to Apple for a warranty/Apple care call, they will replace the drive.

  • My system bootstrapper crashed. I've repaired the disk and disk permissions and still no luck

    While trying to restart after downloading an iTunes update, my computer won't go past the grey screen with the apple and loading bar. When I hit command+s it says my system bootstrapper crashed. I've repaired the disk and disk permissions and it still won't load. Help!

    What is your Mac OS version?

  • I tried partitioning my HD to install linux, the installion was not successful and now I can't boot my mac, I tried internet recovery, it was not helpfull as the disk utility cannot delete the partition I created.

    I tried partitioning my HD to install linux, the installion was not successful and now I can't boot my mac, I tried internet recovery, it was not helpfull as the disk utility cannot delete the partition I created. It was only showing me an error message "EFI files are missing", I realized that it is trying to boot from the new partition I created for the installation of the linux I intended to do.

    It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
    First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
    http://www.adwaremedic.com/kb/baddns.php
    http://www.adwaremedic.com/kb/hackedrouter.php
    If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
    As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
    (Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

  • Lacie 1TB external HDD recently stopped doing Time Machine backups. Disk Utility recommends that the disk needs to be repaired.

    I've been using my Lacie 1TB external HDD for my Time Machine backups for quite sometime. Its never given me any problems until now.
    It recently stopped doing the backups, so I checked Disk Utility and it recommended that I repair the disk. How long does it take for Disk Utility to repair a 1TB external HDD?
    Other things to consider:
    - Cant find the disk in the Finder, I used to be able to do that before.
    - When I tried to go a Time Machine backup, it said the disk was not available.
    Upon using disk utiliy, I successfully verified the disk. Then I initiated the disk repair process.
    The current status:
    - checking file system
    - Volume repair complete
    - Updating boot support partitions for the volume as required.
    The progress bar says "Verify and Repair volume "LaCie"" - the progress bar does not indicate how much has been done or how long it will take.
    Capacity: 1 TB (1,000,204,476,416 Bytes)
    Mount Point: Not Mounted
    Format: Mac OS Extended (Journaled)
    All other status fields blank.
    Any one know how long it will take for Disk Utility to repair the external HDD? Any other ideas as to how I can get the Lacie HDD to reconnect with the Macbook and resume normal operations? i.e. Time Machine backups, accessing contents through the Finder.

    purduegrad_macguy wrote:
    I've been using my Lacie 1TB external HDD for my Time Machine backups for quite sometime. Its never given me any problems until now.
    Mine Failed after 3 years and 4 months of using it as a Dedicated TM Backup drive...
    When I used Disk Utility for repairs... it went from 7 minutes to 4 hours and after about 10 minutes it was saying 40 hours...
    So I just replace it with a New EHD...

  • Disk Utility, Cannot repair permissions

    After finally getting Disk Utility to run successfully, without crashing, it says that all the modifications it found cannot, or will not be repaired. ***??
    I am almost tempted to re-install tiger so I can get my Macbook run smoothly again. I have been getting alot more beachballs, and sometimes I get horizontal tearing.

    I don't have any ready answers for you on that. There are lots of performance related discussions going on here. You'd probably be best served by bringing this issue into one of those threads or starting a new thread.
    But some things to check:
    Has Spotlight completed its initial indexing since you installed Leopard? Click on the Spotlight icon in the upper right corner and see if it says it is still indexing.
    Do you have some process consuming an unusual amount of CPU time? Run Applications / Utilities / Activity Monitor. Select show all processes. Click on the CPU column to sort by CPU usage.
    Is something repeatedly failing and chewing up resources due to that? Run Applications / Utilities / Console. Select All Messages. See if you are getting repeating error messages of some sort.
    Is Leopard recognizing all of your hardware correctly, and in particular is it seeing all the memory you have installed? Select About This Mac from the Apple Menu. See how much memory it says you have. Click on More Info to enter the System Profiler to see the details on what's known about all your hardware/software setup. Does anything look fishy?
    Are you running any third party software that might need a Leopard upgrade?
    Basic maintenance when the computer is not acting the way you like is to:
    Reset Parameter memory (PRAM) -- the place the computer stashes copies of certain settings for quick access: To do this, shut down the computer. Locate the Apple-Option-P-R keys. Hold down all 4 of those keys and keep them held down. With your 3rd hand, press and release the power button. Keep those 4 keys held down. You will hear the startup chime, and about 10 seconds later you will hear a second startup chime. You can now release those 4 keys. The system will continue to boot normally.
    Check your hard drive and system file permissions: Run Applications / Utilities / Disk Utility. Select your hard drive from the list on the left. Select Verify Disk on the right. This will take a long time (20 minutes or so) and the progress bar won't advance at all. Be patient. If the report comes back with errors, then reboot directly from your Leopard install DVD (hold down the "c" key while rebooting). Instead of beginning the install phase again, use the version of Disk Utility available from the menu bar -- except this time do a Repair Disk instead of a verify.
    Once your hard drive is known to pass the file structure verification, use Disk Utility on it again only this time Repair Permissions. This will take 20 minutes or so and the progress bar won't advance until the very end.
    Having done these steps, check again to see how your system performance is doing.
    Just to give you an idea how obscure some of these performance things can be we just had a performance issue that got resolved in another thread. The poster had decided to swap out his internal drive for a larger drive and do a fresh Erase and Install. His performance was awful.
    Turns out he had put the new drive into the same bay with another drive and they were both configured to be the "master" drive on that bus. It's a wonder it worked at all.
    The bottom line is that when properly installed on proper hardware, Leopard really is running quite snappily after Spotlight finishes indexing. So keep looking for what's wrong with your setup rather than going back to Tiger.
    --Bob

  • Disk utility cannot repair HD

    Hello,
    some days ago my macbook (13 inch, mid 2012, yosemite) did not start. The boot of OS X seemed to freeze, so I rebooted starting disk utility to check if something went wrong in my HD.
    At first I started a verification on permissions and as a result I found many files tha couldn't be read
    Then a started a verification on the HD and the response was that disk utility couldn't complete the process and that I had to repair the disk.
    Well, finally I started the repair but it stopped after a while saying that the disk could not be repaired and suggested to initialize the HD and then recover from backup.
    I repeated the process more then once, but the result was always the same.
    Now, i use Time Machine (on a NAS) & CCC (on external usb drive) to backup, so I have all backups accessible, but I wondering if the problem is phisical and not logical (or both) but i cannot understand it. Does the inizialization isolate possible damaged sectors ?
    Do you suggest to try anyway the "inizialize+recover from backup" process or is it better to go to an assistance point and avoid waste of time ?
    Many thanks for any suggestion.

    Solved by myself...Initialised HD and fully restored from Time Machine, all problems disappeared

  • Disk Utility: cannot Repair Permissions, even on Leopard  installation disk

    After reinstall of iLife '08 and Software Update completed, I ran Repair Disk Permissions. Got an immediate red note "error: The underlying task reported failure on exit (sic)." with a flag: "First Aid failed. Disk Utility stopped repairing permissions on 'Mac HD...' because the following error was encountered: The underlying task reported failure on exit."
    I went to my Leopard Installation disk and ran "Repair Disk." No problem found. From the Installation disk, ran Repair Disk Permissions. got the same RED INK comments and flag, First Aid failed.
    Restarts don't help. Also, so far I have not found an application which is NOT working despite this Disk Utility problem, happy to report ;-))
    Additional background. I was reinstalling iLife to fix iPhoto after a clean reinstallation of Leopard and reincorporation of files and apps vis Time Machine. It had been several weeks and iPhoto appeared to be the only app which was not quite right.

    Disk Repair can trigger "underlying task" but I've never heard or seen a Permissions Repair do so.
    You should never use the DVD to repair permissions. You should be using the same OS version. And of course you can always repair permissions from your boot drive; or from backup/clone or alternate "emergency" drive. Otherwise, the DVD and older version of DU will be wrong.
    I know I read that on MacFixit, but I am not sure I bookmarked it.
    Don't rely on Apple First Aid, even a clean bill of health doesn't mean there aren't problems which Disk Warrior can deal with.

  • Can I use my iMac's (10.8.2) disk utility to repair the hard drive of a Macbook (10.6.8)?  The Macbook's startup disk is unavailable.

    Is it as simple as connecting the Macs together with a USB cable?

    I think you can.  I connected a MBP with Lion to a MBP that has three volumes, each with a different OS.  I put that MBP in Target disk mode.  I booted the MBP with Lion, OPTION key down and it showed all of the volumes, including the target disk mode MBP.  I selected the Recovery HDD and then selected the Disk Utility option from the menu.  All volumes were on Disk Utility.  That is as far as I went.  Try it.  I think you will succeed.
    Ciao.

Maybe you are looking for

  • NTSC and PAL

    Under iDVD preferences and the Projects tab it asks a few things that I know nothing about: 1) Video Mode: NTSC or PAL. What are those and when would I use one over the other? 2) Encoding: Best Quality or Best Performance? Which is better to use and

  • Adobe CS 5.5 Standard setup - Adobe Application Manager has stopped working

    Hello, I was wondering if someone could help me with this situation. I successfully installed CS 2 on a Windows Server 2008 R2 SP1 Terminal Server. Now, I am trying to install the CS 5.5 upgrade but the Adobe Application Manager keeps crashing. I dow

  • Move text from one artboard to another

    Hi I have 3 artboards open and am trying to move text from one artboard to another, each piece of text is on a different layer, but when I use the selection tool and just drag it across to the next artboard, nothing shows up.  How do I move text from

  • Help Sourcing Ready-Made Photo Gallery

    Hi there, I am trying to source this exact (or really similar) photo gallery... http://www.vopenhouse.ca/video/4027_hamilton/Gallery/ Does anyone know where I can find it to download/purchase? Thanks so much! :) d.

  • Bigger 'Rejected' Indicator in Loupe View?

    Any way to get a larger, solitary flag indicator in the loupe view? Kind of like taking a red Sharpie and drawing a line through rejects on a contact sheet or proofs. Very rapid to discern and move on. (The custom loupe overlays include the flag stat